Decorating the walls and corners of the house outside. Finishing corners in an apartment, design options How to close an internal corner
Probably every person has done renovations in an apartment with their own hands at least once in their life. Non-professionals sometimes find it difficult to cope with certain tasks.
If you can level the surfaces of the floor and ceiling without any problems, then finishing the corners of the walls is not an easy task and will require some knowledge and skills. Protecting the corners of the walls is essential if there are small children and animals in the apartment.
After all plaster mixtures are not durable, and as soon as you touch a corner, the plaster can crumble, especially on external corners.
Various types of corner protection
If the corners are very skewed, you will have to spend a lot of effort and material to align them. The inner corners are more or less protected by wallpaper, which helps hide uneven surfaces. But the outer corners are always visible and it’s not easy to hide damage here. This requires the use of a special decorative coating.
To strengthen the internal corners of walls, plaster of the corner itself and the adjacent wall is often used, and plasterboard is also used to correct and finish the corners.
You can protect corners in your apartment using different methods and materials. When using plaster, it is worth considering that this method is quite labor-intensive and time-consuming. If the corners of the walls are too uneven, then a large amount of plaster will be required not only on the corner, but also on the walls.
A special metal corner will help to form an even angle As you know, the layer of plaster should not exceed 2 cm, otherwise cracks will appear. To close internal corner, it is necessary to use a metal counter-angle.
Pre-treat the corner of the wall with a primer, then cover the counter-shoulder with a layer of putty and, pressing, glue it.
This metal corner has reinforced mesh, which subsequently goes under the plaster and makes the angle even.
Using drywall and metal corner profile
Drywall often helps to finish corners and walls. If the corner itself has a slight curvature, a frameless method of attaching drywall is used, but if the curvature is more than 2 cm, you should use a frame made of metal profile or wooden blocks. This method allows you to achieve almost perfect smooth walls and ceilings, but at the same time the size of the room itself is significantly reduced.
You can finish the outer corners of the walls in the apartment using metal corner profile. This method of protecting wall corners is the most optimal and allows you to protect the corner from any mechanical damage.
After all repair work this angle becomes completely invisible.
The standard length of a metal corner is 3 m; if necessary, it can be easily cut with metal scissors.
If the corner is straight and even, then you can attach the profile using small nails, but if there are some unevennesses, it is best to use alabaster or plaster to install the profile.
Protective metal corners allow you to achieve perfect even corners in the apartment. Even a non-professional can handle their installation.
Use of plastic PVC corners
PVC fittings are glued on top of finishing Today, one of the most popular ways to decorate external corners is to use plastic ones. Such wall corners have wide application and are suitable not only for decorating external corners, but also for decorating windows and door slopes, joints of panels and arches.
They are available in a variety of colors, some are even transparent, and have a width from 10 to 100 mm. The length of PVC corners ranges from 1.5 to 3.0 m. They are glued to ready-made corners, and are often used to complete finishing work.
Advantages of PVC corners:
- affordable price;
- ease of use even for beginners in repair;
- a wide variety of shades;
- visually straighten even very crooked corners;
- long-term operation;
- quite easy to care for.
Decorating a corner in this way helps to avoid destruction and mechanical damage. Before gluing PVC corners, it is necessary to determine the degree of damage to the wall corner in order to correctly select the width of the plastic corner. Then you need to use a drywall knife.
You can glue these corners in different ways:
- with help mounting adhesive for plastic products;
- using a solution of dry putty mixture;
- glue can initially be applied to the PVC corner.
Apply the adhesive according to the instructions on the surface of the corner and press the PVC corner to the wall, remove excess glue and wait until it dries completely. For best results, it is recommended to fix plastic corners with help masking tape.
Using corners made of wood and polystyrene foam
Wooden corners are not very flexible The decor of the corners of the walls in the apartment can also be done using wooden corners. The advantages of this finish are that wood is environmentally friendly pure material and has an attractive appearance.
Its plasticity allows you to apply carvings to the surface of a wooden corner, which will give the room a unique design. When decorating a room in this way, it is worth considering the need to avoid sudden temperature changes, otherwise the wooden corners will become deformed. Glue this type corners are not allowed in rooms with high humidity. To learn how to finish corners with putty, watch this video:
Probably the most affordable way to decorate the corners of apartment walls is a polystyrene foam corner. Such corners are easy to install and can be painted several times. They are easy to care for as they do not absorb dirt.
Such products are used in rooms with different temperature conditions and high moisture content.
Stone corners and their advantages
Synthetic stone is used to finish corners One of the most popular ways to decorate and strengthen the corners of walls in Lately became a stone.
There are more and more rooms decorated with artificial stone.
With this design method, there is no need for walls in the apartment; the use of decorative stone is especially appropriate for very uneven outer corners.
It is necessary to take into account that artificial stone is much lighter and more affordable than its natural counterpart and is easier to maintain and maintain.
Paste decorative rock you can do it yourself, to do this you must first clean them of dust and dirt. Then special tile adhesive is diluted according to the instructions. Apply it in a thin layer using a spatula on the stone and in a thick layer in small cakes on the wall. The stone is applied to the wall and pressed, excess mortar is removed. To learn how to trim corners with stone, watch this video:
After you have glued three rows, you should stop and let the solution dry, then you can put three more rows of decorative stone. And so gradually finish the entire surface. Thanks to a huge selection of colors and textures, decorative stone can be selected to suit any interior.
Combine different ways corner finishing Following the listed types of finishing corners in an apartment, certain conclusions can be drawn. The most expensive type of finishing is artificial stone, and the most labor-intensive finishing method is considered to be leveling the corners with plasterboard. Different kinds Corner finishes can easily be combined with each other and used during repairs at the same time. External corners with such protection will be installed “in the shield” and will have an aesthetic appearance for many years.
What types of decorative corners are there, methods of application, installation rules and examples of use in the interior. Contents One of the most problematic areas in interior decoration are external corners.
It is quite difficult to cover them well; the wallpaper often peels up at the corners; the corner can easily be damaged by hitting it when rearranging furniture or...
Decorative corners made of aluminum, wood or silicone for the corners of walls: how to decorate under or on wallpaper, what is best to glue and fasten on
What types of decorative corners are there, methods of application, installation rules and examples of use in the interior.
Decorative corners for walls
One of the most problematic areas in interior decoration are external corners.
It is quite difficult to cover them well; the wallpaper often peels up at the corners; the corner can easily be damaged by hitting it when rearranging furniture or carrying any hard large object.
Decorative corners help solve these problems.
The corner protects the surface from mechanical damage, allows you to hide some flaws in the finishing, create a transition from one material to another, and cover the ends of tiles or panels.
Where are they used?
There are many options for using corners in the interior. They can be used to decorate both external and internal corners of walls. Some difficulties arise when finishing angles other than 90°; this requires special, so-called. folding, corners. To finish the curved surface of the corner, flexible, “arched” corner profiles are used.
The most common ways to use decorative corners:
- The connection of the window slope to the wall. It is extremely rare to see a slope whose near edge is not covered by a corner. Their use in this case protects the end of the slope from damage and prevents the wallpaper from peeling off, which quite often happens on external corners. In addition to technical, the corner profile also carries an aesthetic load. Usage white corner gives completeness to the window opening. A profile that contrasts with the slope and wall decoration can create the desired color accent or become an independent original interior detail.
- Doorway design. Corners can also be used when decorating a doorway when the wall thickness is greater than the width of the door frame. In this case, additional trim strips are installed on the door, the junction of the end of which with the wall is covered with a corner element matched to the color of the door.
- Protection of external corners of walls, columns, ledges. In this case, the corner protects the wall decoration from mechanical damage, for example, an accidental blow from a heavy oversized object. It helps preserve the finish and layers of putty and plaster. Also, the use of a corner profile simplifies room cleaning. Often, hand marks remain on the outer corners, which are easier to remove from plastic than from wallpaper. Properly selected contrasting corners help avoid boring and monotonous interiors.
- Design of openings. In interior design, instead of doors, a simple opening is often left, for example, between the kitchen and the living room. Corners serve to decorate and protect corners.
- External corners of walls lined tiles or wall panels. The corner profile covers the ends of the tiles, because they differ in color from the front surface of the tile. If the tile is cut to size and the edge of the cut is not polished, it is easy to cut yourself on such a corner. When installing a corner on a panel, they cover the corner joint. Using a special corner profile for these purposes is not always convenient, so decorative corners are used.
- Decorating and protecting the corners of gypsum plasterboard structures, for example, racks or shelves.
- Furniture decoration, mirror framing. In addition to decorative functions, it protects edges from chipping.
Varieties based on materials of manufacture
Corner profiles are made from various synthetic materials, MDF, wood, metal. Its appearance depends on the material of the corner, specifications and scope.
Metal
Made from aluminum of stainless steel, brass. Steel and brass products are polished and uncoated, while aluminum products are divided into polished, anodized and coated. decorative coating, usually wood, but can also be painted various colors. They are used mainly in the manufacture of furniture, less often in interior decoration. To protect the ends of furniture boards, they are covered with a multi-shelf corner, one of the shelves of which completely covers the end, the second extends slightly onto the plane. Unpainted profiles are suitable for framing mirrors and glass-covered paintings or posters.
Metal corners can be mounted on walls as a basis for easy suspended ceiling type "Armstrong" or from PVC panels. Aluminum products are attached to the steps as anti-slip pads and protect the edges from chipping.
Wooden finishing
Made from various breeds wood, including valuable ones. Wooden corners are used to complete finishing in rooms made of wood, for example, wall cladding with a block house or clapboard.
With their help, the ends of the boards are closed, both on external and internal corners. These products are also suitable for decorating painted or wallpapered walls. In this case, they need to be painted or varnished. Wooden corners can only be used on strictly right angles, because They are fragile and can crack if you bend or straighten them with the slightest effort.
Transparent silicone corners for wallpaper
If there is a need to protect the corner and preserve the wallpaper pattern, apply a silicone corner profile. This material is quite soft and is well suited for rooms where small children are often present, because... reduces the risk of a child being injured by hitting a corner. The relative disadvantage of these products is that, due to their transparency, they do not hide imperfections in the finishing.
Polyurethane
They can be smooth, with a relief ornament and profiled. Smooth ones are similar to ordinary PVC corner profiles, differing from them in the greater thickness of the shelf. Three-dimensional ornaments are often reproduced on shelves.
For use in classic interiors, polyurethane profiles of complex cross-section are produced that imitate plaster stucco. There are white ones on sale and painted in various colors, including those imitating wood; you can also find them painted in several colors, for example, the smooth part is like wood, and the ornament is like gold. Because of complex shape require great care in installation. Paints used in finishing work well on polyurethane.
Plastic colored
Made from PVC. They visually imitate wood, a metal surface, or are simply painted in one shade. The palette of monochrome corners contains approximately 30 shades. If necessary, the white profile can be painted in the desired shade with special paints. It is used everywhere in decoration, second only to white in popularity. To design arches and other curved surfaces, there is a special type of corners - flexible or arched.
MDF corners
They consist of 2 MDF strips glued together using film. The film is applied from the front side, the pattern repeats the pattern on MDF panels. Due to the fact that the shelves are fixed movably relative to each other, the same profile can be used on surfaces mating at different, internal and external, acute, straight and obtuse angles. Typically used for wall cladding MDF panels, but can also be used instead of any other type of corners.
It is not advisable to use MDF corners in rooms with high humidity.
Decorating corners in an apartment: how to decorate a room with corners
Options for using decorative corners in the interior design of a room depend on many factors:
- Surface materials. A white plastic corner glued to the corner of clapboard walls will look ridiculous.
- Finish colors. Under no circumstances should a red element be placed in a room designed in pastel colors.
- General stylistic solution of the interior. A polished stainless steel profile will not fit into a classic interior; a polyurethane “stucco” profile will not fit into a high-tech style.
- Purpose of the room. Silicone corners are great for children. They will keep the corners intact and help protect the child from injury.
Wallpaper design options
To complete the finishing after wallpapering, a profile made of any of the above materials can be used. The main criterion when choosing a corner will be its color. The choice of color can be approached in different ways. If the joining walls are approximately the same shade, you can choose the product to match the color of the walls; if they are different, you can match the color of the wall to which the eye is most often drawn. For example, when finishing the corner between a room and a hallway, it is more logical to choose a profile that matches the color of the room’s finishing.
One of the finishing options is decorating with a wooden corner, tinted to match the color of the doors or floor using impregnated stain and coated with varnish. Products made of MDF and PVC, decorated to look like wood, are suitable for the same purposes. When decorating a strict, laconic interior, metal corners will look good.
Solution for corners on slopes: the better way to seal corners in an apartment
To complete the finishing of the slopes, corners are used in the color of the slope, almost always white. Often the material for slopes is a sandwich panel, therefore, to ensure that the material does not differ much, PVC corner profiles are used. The width of the shelf is selected so that it covers the end of the panel or gypsum board. If there are any finishing defects near the window opening, for example, unevenly cut wallpaper, the corner is chosen to be of such a width that these errors are covered.
The angle between the wall and the slope is usually more than 90°; in order for the corner to lie flat, it should be slightly “bent” - placed on flat surface or a large diameter pipe and press lightly with your hands, moving along the corner.
In the cold season, the profile should heat up to room temperature before work.
Option for decoration under wallpaper
For walls covered with wallpaper, the option of wallpapering a corner may be suitable. For these purposes, profiles made of PVC, MDF, wood or smooth polyurethane are suitable. The profile should be a light shade, because... dark may appear from under the wallpaper. Wallpaper is pasted onto it, the glue is allowed to dry, then, no earlier than the next day, it is mounted on the wall. The wallpaper on the corner should be glued in one piece, of such a size that the wallpaper extends onto the inside of the shelves.
How decorative corners are attached
To install the corner profile, various adhesives are usually used; much less often, metal and wooden parts are fastened mechanically using self-tapping screws or nails.
What to glue plastic ones to?
For fastening PVC corners the following are used:
- "liquid Nails";
- acrylic sealant;
- silicone sealant.
When using sealants, profiles must be fixed for 12 hours after gluing using masking tape. Liquid nails give the best results; some brands of this glue do not require fixation while drying. As a rule, such glue needs to be applied to one of the surfaces, pressed on the other, then removed, let the glue dry, and then press firmly on the part to be glued.
For installation of polyurethane products you can also use liquid nails, or special glue.
Finishing wooden corners in an apartment
Surface wooden corners must be protected with varnish or paint. Varnish will preserve the texture of the wood; a thick layer of paint will hide it. If you need to give the wood some shade while maintaining the texture, you should use a wood stain or tinting impregnation.
The wooden elements are fastened using liquid nails, wood glue or PVA. Can also be attached to finishing nails.
When driving a nail, the distance from the edge of the part to the nail should be more than 10 of its diameters.
How to glue a plastic corner on wallpaper
The plastic corner is glued to the wallpaper using the same adhesives as to any other surfaces, i.e. liquid nails or sealants. It is important that the wallpaper at the installation site is well glued to the wall and that the wallpaper glue is dry. It is best to wait a few days after pasting the wallpaper and only then start decorating using corners.
How long does it take to dry?
The drying time of the glue is indicated on the packaging, and rarely exceeds 12 hours. When gluing onto silicone or acrylic sealant, it is advisable to keep the elements fixed for 24 hours.
Decorative corners allow you to solve many problems in decorating a room. They are inexpensive and relatively easy to install and dismantle, so you can experiment with them if you wish.
Useful video
Corners play a bigger role in the interior than it might seem at first glance. It is enough to look at their uneven or “erased” surfaces to immediately become clear: no one would call such a finish neat. Decorative corners for wall corners, door slopes and window openings began to be used everywhere during repairs only in last years. Until then, the materials used to cover the joints simply changed more often than the rest of the finish.
You can appreciate the transformative effect of a decorative element even in an empty room without furniture. Based on the type of location, they are classified into two types:
Elements are also classified into those that are placed on the outer sides of the corners and those that are inserted into the internal ones. The latter can have semicircular shapes that “soften” the finish. You can make a corner with your own hands, or purchase it at a specialized store. Products are made mainly from plastic, MDF, but there are also more durable metal and stone options. Polyurethane effectively imitates various natural materials: wood, marble, sandstone, brick. Plastic corners are used not only as decoration, but also as a durable finishing element that will “outlast” wallpaper or other less durable wall surface coating. There is also a “mystical” component to the question. According to Feng Shui, the places where the “joints” of the walls are considered energy breaks, which create an imbalance and negatively affect the perception of the situation, so their edges are decorated with corners, “smoothing out” the sharpness.
What are decorative corners for?
Corners are most often “touched” by people passing by with their shoulders, elbows and carried objects. Accordingly, it is this part of the wall that is erased and scratched more than the remaining ones. To protect the joint from mechanical stress, a decorative corner is attached to it - a special type finishing materials, a special “overlay”. It is designed to perform two functions:
- Decorate the finish;
- Protect the sensitive area.
In addition, finishing using these elements looks neater and the interior seems complete. Using the material, color and size, you can emphasize the features of the style used in the design of the room.
When to apply
The corner part of the wall is covered with decorative elements in several cases:
- If the corner has visually noticeable defects: curvature, “dimples” or protrusions that were not corrected with plaster;
- When the protruding part obstructs the passage or is located next to the “pedestrian” area. Accordingly, it will constantly be touched, erased, scratched. Over time, mechanical damage will become noticeable and negatively affect the sensitive wall finish and its appearance;
- If without them the interior does not look complete;
- To prevent the destruction of the outer corner of the building and give the exterior a neat appearance.
The installation of elements usually completes the renovation: they literally become the finishing touch in the design.
Plastic corner size
The standard range of sizes for PVC corners starts with 10x10 mm and ends with 50x50 mm. Between them, gradations with a difference of 5 mm are used. Parts of non-traditional sizes are made to order. An angle of 90 degrees is maintained between the two guides of the decorative element, at which all planes of the apartment must intersect. If you have a home with “crooked” walls, then you need to take appropriate measurements and contact a specialist with a request to make individual parts.
Decorative panels for the kitchen
Types of decorative corners on walls
Corners are universal finishing elements. They are pasted in bathrooms, kitchens, bedrooms, balconies, offices and living rooms. Decoration is carried out using several types of elements:
- Arched, for plasterboard partitions;
- For ceramic tiles. This category also includes profile strips for the bathroom;
- Corners made of natural and artificial stone;
- Options made of wood;
- Special guides for siding (exterior decoration);
- Corners for ceiling and floor “joints”;
- Textured options;
- For external and internal corners;
- Corners for door and window openings.
Each type is combined with a specific wall decoration and organically blends into specific styles. Corners are used to decorate not only walls, but also fireplaces, stoves, furniture, and “boxes” for masking communications and pipes.
Arched
Arched corners are used under plaster or glued on top of an already finished surface. “Internal” elements provide smooth straight lines. Corners for semicircular partitions are characterized by increased flexibility, which allows them to be tightly bent to curved surfaces of the base. If the decorative wall has a strict rectangular or square shape, then decorative elements can be selected from standard plastic options, designed for simple walls.
For ceramic tiles
Ceramic tiles are used to finish walls and floors in kitchens and bathrooms. At the corners, the tile seams are tightly sealed, they do not allow water to pass through, but they collect dust, dirt and grease (in the food preparation area). Also, these places are usually used by bacteria and fungi to organize their “breeding ground”. Microorganisms will not get under properly treated seams, but they can easily make a comfortable “home” on their surface. When cleaning tiles, it is recommended to pay special attention to these areas. Overlaying the corners allows you to reduce the scope of work and make the place where the walls meet reliably protected from the adhesion of dirt particles. In addition, the decorative element will competently disguise uneven tile cuts, and options that contrast with the color of the tile will add chic to the room. Corners are divided into two types:
- Internal. They are used to decorate joints between walls and ceilings, floors, showers, that is, “pressed-in” corners. Usually have a convex or concave shape (fillet);
- External. Used when processing protrusions.
Popular plastic is not used for decorating tiles, since the main coating can compete with polyurethane in durability and strength. We need all the finishing elements to “age” approximately equally, otherwise, due to a corner that has become unusable, the tile will have to be “disturbed” once again. Metal and ceramics are used to decorate tiled surfaces.
There are so-called “ribbon” corners. They are made of flexible plastic, produced in “reels”, are highly flexible, and can be easily replaced if necessary. This option is ideal for quick repairs.
For external and internal corners
The elements are classified separately into external and internal. The former are used to decorate protruding joints of surfaces. The latter are used less frequently in “concave” corners. The latter are not in such dire need of protection, so overlays are only needed to decorate the finish. Inner corners usually have a semicircular concave or convex shape.
Textured corners
Textured options differ in color and pattern. They are usually made of plastic. Often the corners imitate a specific material: bricks, marble or granite surfaces, porous stone, wood (wenge, cork, oak, cherry). A variety of shades allows you to choose a contrasting or background option for a specific interior.
Wood wallpaper: types, advantages and disadvantages +50 photos
Wooden
Wooden corners are usually made from thin MDF plates, bamboo, cork or veneer. The materials are as light as plastic. MDF is flexible, and a decorative layer with protective film from damage. In veneer versions, the element is made from thin wood slices, that is, it is more natural and has a natural pattern. Solid wood corners are denser. Glued to the surface, they will protrude slightly on it.
Not recommended for use natural wood in bathrooms and kitchens. Before attaching the material, it should be coated with a layer of varnish. Wooden elements Most often they are made independently. Unfortunately, a cracked corner can become deformed and crack under a strong impact. You will have to “pay” for the natural beauty of the decorated surface with a lower service life.
Corners for ceilings and skirting boards
Ceiling and floor plinths at the junctions of individual modules have a very unsightly appearance. No matter how carefully the cuts are processed, they will slightly undermine the aesthetic picture of the interior. Decorative corners are used to disguise them. By appearance they are different from wall options: They look like small overlays that are designed to decorate a small area. For ceiling plinths with stucco in classic styles acquire special corners with monograms, repeating each bend of the connected straight lines. The use of elements on ceilings is not mandatory, which cannot be said about floors. Here, the baseboards are constantly in contact with the feet of guests and household members. Their “joints” can become loose, frayed and become completely unusable. The corners will save the baseboards from rapid wear.
In design compositions, the lower decorative elements sometimes echo the upper ones. This solution ensures the integrity of the composition, so ceiling and floor plinths often have the same outlines, and accordingly, identical corners are selected for their decoration.
Natural stone corners
Decorative elements made from natural stone, are usually used to decorate the facades of houses. Due to the strength of the material, they serve excellent protection from the destruction of the building. However, with the popularization of the industrial loft, brick and stone masonry have become an organic addition not only to the exterior, but also to the interior of the house. Such corners will definitely “protrude” slightly above the surface. You should choose flat stones that will ensure a neat appearance of the entire structure. Hold them together cement mortar, that is, the corner will be monumental and installed for ten years. Elements are combined with plasterboard walls, relief plaster and wooden lining.
Artificial stone corners
Corners made of artificial stone are considered cheaper and practical options. As a rule, imitation is made of plastic. It repeats not only the color, but also the “rough” texture of the surface. PVC is flexible, often goes beyond the “borders” of the corner and creeps onto the wall itself. This solution is used to create the illusion of naturalness of the decoration, because real stonework usually does not fit the line. Combine the corner with wallpaper and the same plastic panels.
It is important to know. Thick wallpaper is considered the most budget-friendly imitation of stone at the corners. Curly pieces are cut out of them along the contours of the pebbles and glued to the joint. Such an element will not protect the surface from scratches and damage, but it will cope with the decorative task.
Options for using corner profiles for finishing corners
The corner profile is used to decorate the following elements:
- “Natural” joints between walls that are in a vertical plane;
- Door and window slopes;
- Places of “convergence” of ceilings, floors and walls in horizontal planes with a concave shape;
- Angles decorative partitions, including arched openings;
- Joints between shower cabins, fireplaces and other “monumental” (not involving movement) interior objects and walls and floors.
Mirror tiles in the interior: application ideas
A decorative element can be used to “smooth out” any “seam” at the junction of finishing materials. If previously it was necessary to carefully process the cuts so that they retained a beautiful aesthetic appearance, now they are allowed to have irregularities and chips, which will be masked by the corner.
Finishing door and window slopes
Double-glazed windows usually come with special corners that complete the installation of the window. Door sets also often include trims and trims. If the corners are left without additional protection, then you will have to select and glue it yourself. The element will protect the slopes from damage and smooth out the junction of two different materials. For example, the end of the wallpaper will begin to wear off and peel off over time. No matter how smoothly you cut the finishing material on the slope, it will look untidy without additional coating. Slopes in doorways can be scratched by furniture carried through them.
The best option would be to use polyvinyl chloride corners. If necessary, it is easy to replace, and the surface texture can imitate any natural materials. By choosing a special shade, you can create an illusory transitional border between the color of the wallpaper and window frame or a doorway. Corners made of veneer or bamboo are less commonly used.
Arched doorways
Arched openings, as a rule, have one of the classic shapes: with a semicircle on top. Not every material can replicate its contours. For example, solid wood corners can only be used to decorate straight lines. Smooth transitions are decorated with elements made of flexible plastic, MDF, veneer or bamboo. All of the above options will easily follow the contours of the arch and complete the design of the doorway.
How to glue a plastic corner yourself
In addition to decorative corners, you will also need a fastening compound. For narrow elements it is not recommended to use glue, the excess of which cannot be removed from the surface without leaving a trace. Before carrying out the procedure, the joint must first be cleaned of dirt and remnants of wallpaper or protruding pieces of finishing material. No corners will save an excessively uneven and bumpy surface. Then the wall is measured. The measurements are exactly transferred to a piece of corner. It is better to cut the material with a hacksaw with fine teeth. Do not forget about the joints between the corners themselves (in doorways, windows): two straight lines should end with cuts at an angle of 45 degrees. The “wrong” side of the prepared material is smeared with glue and applied to the wall. Using your hands, firmly press the corner to the surface and hold it until the fastening composition “seizes”
Conclusion
There is another type of decorative corners that decorate furniture (sofas, cabinets, beds, cabinets). Typically used to protect MDF joints or Chipboard boards, which are especially sensitive to damage and begin to crumble over time. Special silicone corners save the little fingers of household members from constant impacts on these surfaces. In interior design, the use of these elements usually completes renovations. Their installation is akin to the final touches of a brush on an almost finished canvas, when the artist, moving away from the easel, evaluates his creation with a critical eye and corrects individual areas so that the composition becomes complete. Decorative steel corners mandatory element in the design of the room, which emphasizes its neatness and beauty.
Go to your email service right now by clicking on the icon
and you will receive a unique selection of tips on exterior home decoration from a manufacturer with 18 years of experience!
Important! If you don't receive the email, be sure to check your spam folder and move the email to your inbox if it is there.
Elegance in detail: corner finishing system
The beauty of the facade is in the overall picture, which consists of details that are invisible at first glance. But there are no unimportant little things! And finishing the corners of the house occupies a special place among them. Here we need a well-thought-out system of elements that will decorate the house, combine with the main decoration and at the same time strengthen the most vulnerable places of the corner joints of the panels.
To ensure that a house finished with siding has an aesthetically complete look, the Alta-Profile company has released the Alta-Decor system of finishing elements. This collection also includes external corners.
Decorative finishing of house corners for facade panels
The collection of Alta-Profile facade panels is harmoniously complemented by figured external corners. In structure and color they match the panels, be it brick or stone. Corner finishing can be done:
- absolutely identical to the facade of the house;
- contrasting to the facade: you can finish the walls like brick, and the base and corners - facade panels"Rocky Stone" or from any other collection.
You can “try on” various combinations of shaped external corners and façade panels and choose the most suitable one using online programs"Alta-Planner".
Universal corner finishing system
The Alta-Decor collection also includes universal finishing of the corners of the house facade, which can be used with absolutely all Alta-Profile finishing materials - horizontal, vertical and foam siding, block house and facade panels. In addition, such a system can be installed with other types of finishing - for example, on a plastered facade.
The corner finishing system consists of a base and overlay finishing elements of three various sizes. By combining them, you can achieve interesting design effects. There can be a lot of options, and the choice depends solely on the taste of the owner and the desired result.
Basic installation rules: how to finish corners?
The corner finishing system is installed in much the same way as siding and facade panels. Since corners are more often subject to increased loads than walls, it is preferable to mount them on a metal sheathing.
A flat sheathing profile is used to install the corner finishing system.
When finishing corners, you must follow the following rules:
- The first step is to install the “mounting base” profile. To do this in special holes 3 screws are screwed into it on each side.
- Overhead elements of different sizes are attached to the base in random order. They are inserted into special grooves and snap into place.
- You need to think about the installation procedure in advance, since the finishing elements are only suitable for one-time use.
- No special tools are used during installation.
- Siding and facade panels are inserted into a special gap between the sheathing and overhead elements.
- If the thickness of the panels is greater than the gap, then they are secured using a mounting shelf, which is bent on each side and secured in the appropriate clamps.
Cladding the corners of a house with a plastered facade
The Alta-Profile corner finishing system is suitable not only as a complement to siding and facade panels, but also with plastered facades. In this case, you need to cut off the mounting shelf for fastening from the mounting base profile, and secure this profile to the wall using self-tapping screws. Next, the installation of overhead elements is carried out in the same way as they are installed when finishing a house with siding or facade panels.
Such a system will become an attractive accent if the house is decorated with decorative plaster, and will also help strengthen the most vulnerable areas of the facade.
Finishing the outer corner: 5 reasons to choose Alta-Profile
External corners require additional reinforcement. The plaster in this area most often crumbles. And the panels at the joints also need protection. The Alta-Profile system for finishing external corners helps solve this problem.
Finishing the corners allows you to create a bright and unique design of the facade of the house. For façade panels, you can choose shaped outer corners that repeat the façade finish or contrast with it.
For siding and decorative plaster Alta-Profile has developed a universal system for finishing corners. Thanks to the combination of different geometric shapes, you can make the facade extraordinary.
The corner finishing system is installed very simply, without the use of special equipment and tools. Even a beginner can cope with the job.
The finishing elements are made of environmentally friendly plastic: they are durable, do not fade in the sun, and are not afraid of moisture and temperature changes.
In addition, materials for finishing corners can be purchased together with Alta-Profile siding or facade panels. You don't have to waste time searching for suitable materials. Our specialists will calculate as accurately as possible required amount profiles and strips. And a certified installation team will install them in accordance with all the manufacturer’s requirements. All you have to do is choose how you want the front of your home to look and, in particular, whether the corners will neatly enhance the trim or become a bright and attractive design element.
When arranging a house or apartment, they are often faced with the problem of what to put in the corner or what to do with it so that the space is not empty and looks beautiful. If you think through this issue correctly, then this space can be used really effectively.
We offer several ideas on how this can be done. For convenience, we divide them into subparagraphs based on the location of the angle:
- In the hall
- In the hall
- In the kitchen
- In the nursery
- In the bedroom
- In bathroom
Shelves
Several small shelves located in the corner of the room will serve both a decorative and practical function. Place photos or figurines on them and see how much your room will be transformed.
Creative corner
You can also place furniture in the corner if the decor and space allow. This desk or work desk has an ideal placement, it is close to the windows on both sides, providing good lighting and provides the opportunity to both work and read in a pleasant atmosphere.
Small corner table
This table is not intended for writing or eating; it, in fact, acts as a shelf for several photos, table lamp, vases with flowers or similar decorative elements.
Reading corner
Another one interesting idea is to create a reading nook in one of the empty corners of your home. Find a sufficiently lit corner (closer to the window) and equip it with a pouf and a floor lamp. In winter, add a warm, soft blanket to this and the ideal place to spend your free time reading your favorite books is ready.
Like the photo - in this article
Another photo idea for setting up a corner for reading or thinking. You can just put a chair, or you can also cover it with curtains, isolating yourself from everything for a while outside world and immersed in your own.
It will also work with a chair in the corner near the window. a good place for reading. Simply a fabulous place to read and relax. This will require more effort than just putting a pouf, but it turns out incredibly cozy. 
Home cinema.
The corner of the room is actually a very good place for the TV because it allows you to see it from almost anywhere in the room. Place armchairs and sofas around and enjoy watching movies and TV shows.
TIP: if there is no special corner cabinet for the TV, just put it in the corner on the bedside table, in the end the result will be the same.
In this case, we place not a TV in the corner, but a specially shaped sofa. The whole family or group of friends will fit in, stock up on popcorn and enjoy watching.
Mirrors
Mirrors in beautiful frames can also fill an empty corner space in a room well. This will give the room more light and a cozy atmosphere.
Hangers
A hanger is very helpful when you need to get something from the top shelves of a closet; with it you don’t have to risk your life and put a chair on a chair to get what you need. But storing it in the apartment takes up a lot of space, and the appearance is not very aesthetic.
But this idea will solve all the problems: use the steps of a stepladder as a hanger for blankets and its appearance will immediately change and you can take the blankets as soon as you want to wrap yourself up and keep warm.
Library
Notice how effectively this corner is set up; all the shelves complement each other perfectly. Standing in one place, you can reach almost any book. Of course, not many people have a piano at home, but it will look very good even without it.
Tea corner
It is very convenient to have a corner bench or sofa in the living room; place a small one there round table, and you will get a cozy place for drinking tea or pleasant conversations.
Plants and vases
Plants, especially large ones, are very beautiful decorative element and are actually suitable for all rooms. However, they take up a lot of space, so corners are ideal for them. Plant a flower in a beautiful large vase and it will wonderfully complement your home interior.
Floor lamp or floor lamp
A floor lamp placed in the corner will softly illuminate the room, creating a cozy homely atmosphere in the evenings.
Empty corner in the hallway
Photos on the wall
Fill an empty corner with paintings or photographs, organize a small home exhibition visual arts. This will definitely please the eye more than bare walls.
Bookshelves
Corner shelves with books can be placed not only in the hall, but also in the hallway. Of course, a full-fledged library will not fit here, but you can arrange your favorite books and figurines. More ideas in this article!
Brought finds
Make a mini museum of your tourist travels in the corner of the hallway: a surfboard, large wooden statues, paintings, photos or posters, don’t let it all gather dust in the closet.
In the kitchen
Corner cabinets
We wrote a separate article about 30 ideas, we’ll share some tips here too. This cabinet is very practical and beautiful, while it visually practically does not make the room smaller. You can place cups, vases and various decorative elements on the glass shelves.
Round table
A small round table with four chairs, placed in the corner, will become good option for apartments with small kitchens. Great economy ideas to use old chairs or a chair.
- look here.
In the nursery
Wigwam
In a child's room, you could use a corner as a place for a teepee. Kids love tents, but putting one in the middle of the room would take up too much space, and the corner is just perfect.
Small stage
By hanging two beautiful curtains, the corner miraculously turns into a small stage. Here children can play, develop their talents, or even set up a small home theater.
In the bedroom
Double head bed If your bed is in a corner, then make a double headboard. This is also practical, because during sleep soft back
will prevent you from accidentally hitting your knee on the wall, and it looks more symmetrical and beautiful.
Table or nightstand A small table or bedside table placed in the corner near the bed is comfortable spot
to put the watch or earrings you took off before going to bed, as well as your phone with the alarm on, a glass of water and a book you read before going to bed.
In bathroom
Corner bedside table
Bathrooms in many apartments are so tiny that it is especially important to use every possible space in them. A corner bedside table will help organize the space as best as possible, place all the washing supplies and clean towels. The correct geometry of the space can visually increase the volume and height of the room. protruding corners, ceilings, slopes and doors - vertical and horizontal joints of surfaces support the proportions of the room.
Plastic corners for wallpaper are glued on top for decoration, zoning and surface protection. Perforated products form and reinforce the joint line between the planes before finishing putty.
Arched (with different shelf sizes) products are used to frame curved surfaces.
There are improved modifications of PVC corners:
- flexible self-adhesive, repeating any given joint configuration (internal and external corners, arched surfaces)
- connecting structures for corners formed PVC panels, slopes
- combined with tape to facilitate the adhesion process during putty
Creating a clear line is not the only purpose of the corners. Aesthetics are combined with decorating cracks, irregularities, chips and imparting strength to the joint. Plastic will ensure safety under mechanical stress and will allow you to keep the protruding surface clean.
Advantages of PVC corners:
- create a neat appearance of joints, decorate complex curved surfaces, arches
- have abrasion resistance and are not subject to unexpected mechanical loads
- not subject to corrosion
- laminated film of the outer covering is inert to aggressive chemicals and gases
- easy maintenance, do not require additional operating costs (painting)
- low price compared to analogues made of metal or polyurethane
- service life is unlimited
- wide range of colors
- resistant to moisture (can be used for finishing corners in kitchens, sanitary and bathrooms)
- possibility of using products in unheated rooms seasonal residence (country houses, dachas)
- don't light up
- are colorfast and do not fade in the sun
- change shape under the influence of a stream of hot air (hair dryer) or hot water
Decorative moldings
Cast overlay strips are distinguished by the type of finish: for internal or external corners.
Products are produced with shelves of the same or different widths.
On protruding corners, in places of constant movement (hallways, kitchens, bathrooms), plastic corners for wallpaper with large side sizes (5 cm) are used.
Arches and curved surfaces using corners, with shelves on different sides. Different sizes sides allow you to maintain the required mounting position of the element on the surface.
Length finished product ranges from 2.7 to 3 meters. The plastic is cut to the right size a hacksaw, scissors or a knife. Profile cuts for making connections along the perimeter of the slopes of doors and windows are made using a miter box.
To fix the corners use:
- liquid Nails
- self-tapping screws
- small (bead) nails without heads
- acrylic sealant
- colorless silicone sealant
It is important to remember: compounds intended for metal and glass destroy the structure of plastic! Before purchasing glue, you need to read the instructions and pay attention to the area of application indicated by the manufacturer.
The glue is applied using a gun. A continuous, wavy strip is applied closer to the center of the shelves. The location of the strip will help to avoid squeezing out the glue onto the wallpaper when planting it in place. Excess composition is carefully removed from the surface of the walls with a damp cloth.
You need to glue the corners carefully. Removing and re-adhering plastic leads to damage.
Installed corners fixed in place with construction tape to ensure adhesion to the surface. The adhesive tape holds the plastic in place for 24 hours, then it is carefully removed.
The finished overlay part will hide the unevenness of the joint, protect the surface from mechanical influences, and give the room a neat, well-groomed appearance.
Reinforcement and corner design
Plastic corners for wallpaper under putty reinforce and level the joints of drywall sheets. The corners formed in this way are treated with a finishing layer of putty and sanded. The formed joint is painted and plastered decorative compositions, ennobled with stone, tiles or pasted over.
Sharp or turned corners require the use of corners with universal rotation of the shelves around the axis.
Arched products are designed for bending.
The cut segments allow you to give a smooth shape that follows the specified line of the opening.
Aligning the angle formed by two sheets of drywall begins with assessing the evenness.
A level is applied to each side of the slope and the littered areas are marked. If the joint has significant deviations, then a starting layer of putty is applied to the recesses and recesses like beacons.
The perforated corner is applied to the installation site and lightly pressed into the applied solution. Excess solution is removed with a spatula. Vertical (horizontal) installation of the corner is checked with a level. Correct the position of the plastic by applying gentle pressure.
After the solution has set and the perforated corner has been secured, proceed to finishing putty. The work on forming the corners is completed by grinding the surface.
In the process, they try to give the joint a smoothed shape, which greatly simplifies further finishing work.
Perforated corners add strength to protruding corners and facilitate strict lines, curves and arches.
Color of decorative PVC corners
Color of finishing materials, for structural elements room, must be combined with the color scheme and style of the space. Tone and texture help unify the composition of the interior. A smooth transition of color does not break up the space, and contrasting color indicates a visual division into zones according to purpose.
The door slopes are framed with corners to match the filling of the doorway. Plastic corner for wallpaper (colored) can repeat the color and texture of the wallpaper flooring or ceiling plinth. Corners for framing window slopes selected taking into account the color of the glass unit.
The advantage of plastic corners is that the laminated film has the ability to reproduce different colors and textures (wood, metal, fabric).
Additional possibilities for using plastic corners for wallpaper:
- protection polyurethane foam along the perimeter of window and door openings from the street side
- use in the manufacture of furniture (built-in, including)
- corner finishing kitchen apron ceramic tiles
- installation in places of internal and external connections, when sheathed with plastic panels
- draping joints when covering external walls with siding
Lightweight, durable plastic corners are indispensable for work that completes the decoration of a room. Color palette, presented by the manufacturer of plastic corners, allows you to select the desired tone of the products. Overlay molding decorates, zones, protects, and increases the service life of joints without additional effort.
Built-in design, with additional properties fastenings ( adhesive base and serpyanka tape), facilitates the task of designing slopes, difficult angles, and arches. Experienced and novice builders willingly use plastic corners, improving quality and reducing time for labor-intensive work.
How to glue a corner is shown in the video:
