Christmas tree made from natural materials. Making a Christmas tree from natural material. Step-by-step work process
There has been moss lying around in the remains for a long time, I kept thinking about what to make out of it. But, since the New Year holidays are just around the corner, I didn’t have to think long. I decided to do eco-fir tree made of moss.
I really liked this material in my work; it requires a minimum of decor.
The latest hand-made new items are Christmas trees with curved tops, so I decided to make the same one, only from moss. Such unusual Christmas trees can magically complement the New Year's decor of your home and become a wonderful souvenir gift.
To do moss Christmas tree with a curved top You will need:
- moss (preferably green, it’s soft),
- a small cone made of foam or cardboard,
- double sided tape,
- a little wire
- a small flower pot or any other suitable container,
- building plaster (alabaster),
- 1 kebab skewer,
- hot glue gun,
- scissors,
- decor: ribbons, beads.
Let's get started...
We cut the skewer into 3 equal parts (you can use a fine-toothed knife) and glue them together with hot glue. We dilute the gypsum with water to the consistency of thick sour cream and place it in a prepared container. Place the glued skewers evenly in the center and wait a couple of minutes until the plaster hardens completely. We partially decorate the trunk of the Christmas tree with ribbon.
We will hide the plaster with moss.
Now it's time to work on the cone...
At the top we attach 2 wires; if necessary, you can fix them with hot glue.
Now we need to wrap the entire structure with double-sided tape. If the cone is made of foam plastic, then the bottom is included.
We place our cone on a moss cushion and roll it tightly. If there are small islands left, you can glue them with hot glue. But everything stuck quite well for me, and the isolated, slightly protruding branches can then be pressed down with decor.
We pierce the bottom in the middle with scissors and carefully place it on skewers.
We bend the crown.
Let's decorate it a little, although the Christmas tree itself looks very interesting.
And with the symbol of the coming new year! 🙂
The Christmas tree turns out to be miniature, about 20 cm. It will not take up much space and will look great on your desktop. So original New Year's gift Your loved ones, friends and work colleagues will certainly be delighted. And create one like this DIY souvenir very simple and fast.
I was glad to help!
Christmas trees from natural material with your own hands. Master class with step-by-step photos
Composition Festive duet. Master Class
making a festive composition for decorating the interior of a room for the New Year.
Tasks:
- Demonstrate the stages of making Christmas trees from natural materials.
- Improve skills in working with natural materials.
- Develop creative imagination, fantasy, ingenuity.
Purpose: interior design for the New Year.
New Year– one of the most beloved folk holidays. No holiday excites the imagination as much as New Year...
Decorating the interior of a room is one of the ways to create a fabulous, New Year's atmosphere. Tinsel, garlands, decorations - bring a feeling of celebration to any home. And, of course, we cannot imagine a single New Year without the main attribute of this holiday - a Christmas tree. Christmas trees can be different: real forest beauties or artificial, stylized, fantasy. The most important thing is that the Christmas tree creates a festive mood that lasts as long as possible.
I suggest you make your own Christmas trees from natural materials, which will become an original and unique decoration for your interior.
Christmas tree No. 1. Tools and materials.
1. Cardboard.
2. Pencil, scissors.
3. Glue Master, Titan.
4. Natural material: bones various plants, nut shells, acorn shells, starfish.
5. Gold or silver spray paint.
Sequence of making Christmas tree No. 1.
1. Cut out and glue a cone from thick cardboard the right size.
2. We make the bottom of our Christmas tree: on cardboard we draw a circle (the diameter of the cone), around it there is another one 1 cm. more. Cut out, bend the edges along required diameter and glue it to the cone.
3. Glue the stand to the bottom of the Christmas tree. For the stand, you can use a cardboard base from adhesive tape, plastic lids from coffee and plastic jars, etc.
4. On the resulting frame, using “Master” glue, glue the seeds, nut shells, and acorn pads tightly together, alternating them with each other.
5. Decorate the top of the Christmas tree with a starfish.
6. Paint the finished Christmas tree with spray paint.
7. After drying, decorate the Christmas tree with beads and glitter gel.
Christmas tree No. 2. Tools and materials.
1. Cardboard.
2. Pencil, scissors.
3. Glue “Master” (“Titanium”).
1. Natural material: roses made from orange (tangerine) peel of different sizes.
4. Gold or silver spray paint.
Sequence of making Christmas tree No. 2:
1. We make a frame from cardboard as in the manufacture of Christmas tree No. 1 (items 1-3). Paint with spray paint.
2. Make roses from orange and tangerine peels:
a) peel a fresh orange by cutting the peel in a spiral;
b) place the cut peel in such a way as to form a rose;
c) let it dry;
d) paint the finished roses with spray paint.
3.Glue the roses onto the cone in rows close to each other. Let's start with lower tier, from the largest roses. We glue each next row in a checkerboard pattern in relation to the previous one. With each subsequent row, the size of the roses becomes smaller.
4. Decorate the top of the Christmas tree with a spiral of orange peel.
5. Decorate with beads, gel with sparkles.
For our 35 cm high Christmas tree we used 56 roses different sizes, from the largest to the smallest.
If you want your Christmas tree to glow, you can insert light bulbs into the center of the roses. New Year's garland. If the height of the Christmas tree is at least 35 cm, you need a garland with 50 lights.
Christmas tree with garland.
1. Cut out and glue a cone of the desired size from thick cardboard. We paint it with spray paint.
2. We make roses.
3. On the cone we mark the locations of the roses. In the cone, in the center of the marked roses, we use an awl to make holes into which we insert garland bulbs from inside the cone. The holes in the cone should be small so that the bulbs fit tightly into the cardboard.
4. We begin to insert the light bulbs from the top of the cone. When all the bulbs are inserted, glue the roses so that the bulb is in the center of the rose. If necessary, make an additional hole in the rose (or remove the lower part). If you have light bulbs more quantity roses, they can be additionally placed between the rows of roses.
5. Before gluing the bottom to the Christmas tree, we check the operation of the garland. Only after this we glue the bottom and stand.
6. Decorate the top of the Christmas tree with a spiral of orange peel.
7. Decorate with beads, gel and sparkles.
Especially for those who feel sorry for buying a real one live Christmas tree for the New Year we are sharing great idea what it might look like creative Christmas tree with your own hands. Moreover, it is also real, since it is made from natural material.
In order to make unusual Christmas trees with your own hands for the New Year, all you need is a few wooden sticks that you can easily find in the park or in the yard. With their help, we will create unusual Christmas trees with our own hands. and very quickly. Such a Christmas tree looks great on the wall and can decorate any home, be it a chic country house or a small room.
The main thing is to invest in this craft own feeling style and do something really creative!
DIY Christmas trees for the New Year on the wall
To have a Christmas tree on your wall with your own hands, you will need:
- approximately 10–20 wooden sticks of different lengths;
- small saw, hatchet or jigsaw;
- twine, twine or any natural rope;
- sharp scissors;
- electric Christmas garland;
- Christmas decorations.
How to make decorative Christmas trees with your own hands
First, clean the sticks from small knots and debris and dry them. Lay out along the length from longest to shortest, so that the shape is similar in shape to a Christmas tree.
If necessary, cut off the extra few centimeters from the prepared sticks with a jigsaw.
