• Interior
• Window
• Walls
• Projects
• The buildings

Pros and cons of stone-look facade panels. Stone-look facade panels: types of panels for exterior decoration of a house, step-by-step instructions Houses made from stone-look panels

Nowadays, artificial finishing materials that imitate natural ones - wood, stone, brick - are becoming increasingly popular. One of the first places on the list of these materials is plastic panels for facade cladding.
They meet the highest requirements for exterior finishing and make any building look great quickly and inexpensively.

Plastic products primarily include products made from polyvinyl chloride - wall and basement siding. Exactly about the latter we'll talk In this article.
But I would like to immediately clarify that the name “basement” is not entirely correct. Indeed, these panels are often used for cladding the above-ground part of foundations, since their thickness and strength are much higher than that of conventional wall siding.

But their purpose is not limited to this: such panels with decorative surface stone, brick, marble or wood - an ideal material for finishing facades.

Advantages of the material

Plastic cladding panels for facade different manufacturers may differ in size and decor, but they all have the same advantages:

• Moisture-resistant, thanks to which they reliably protect load-bearing walls and insulation against exposure to precipitation;
• Absolute resistance to corrosion and rotting. PVC does not support the growth of mold, mildew, and is not damaged by insect pests;
• Facade panels made of plastic do not fade in the sun, since the UV-resistant dye is introduced directly into the raw material and is not applied to the surface;
• Low price compared to those materials whose surface they imitate;
• Simpler and quick installation, especially when compared with facing houses with brick, natural stone or clinker tiles;

Siding is not just a boring and monotonous exterior facade decoration. There are many varieties of this material for all occasions. If you are a fan of permanent buildings, then pay attention to the stone-look facade panels, which will give the house the new kind. The material imitates large boulders, flat, rubble and other types of stone. Facade panels for exterior finishing They will completely transform the simplest house into stone, and in addition it will become warmer.

Finishing the facade of the house with stone panels

Blocks for exterior finishing perform not only an aesthetic function. The facade decoration is reliable protection home from negative impacts. Installing slabs on the walls of a building allows you to extend its service life and completely renew the façade without significant costs. Siding is a lightweight material that does not place significant load on the building. Installation of the panels is simple - their installation does not require highly qualified workers, which means the cost of the work will be low.

Stone façade finishing options

Cladding a house with stone-like panels is done in one or several shades of the panels. By using multiple colors and textures, you can highlight multiple design elements. These could be windows, corners, basement.

It is customary to install darker and larger elements on the base. Lighter blocks are used for walls.

The finishing of a private house is made with stone-like facade panels in two shades

Manufacturers produce a large number of stone panels designed to various conditions operation.

Types of panels

Stone siding differs in several ways:

material;

• the presence or absence of insulation;

  fixation method.

The following materials are used for siding:

• fiber cement.

The dark shades of the panels highlight well bright windows building

Metal siding

Metal panels are made by stamping. Galvanized steel blocks are coated with polymer protective composition, a layer of decor that reproduces the surface of the stone. By applying several layers of coating, the blocks become thicker and heavier. But this increases the strength of the material. Metal siding costs more than vinyl.

The panels may have different patterns, for example, the corners are “lined” with a geometric pattern

On our website you can find contacts construction companies who offer the service of finishing and insulating houses. You can communicate directly with representatives by visiting the “Low-Rise Country” exhibition of houses.

Vinyl panels

Panels made of plastic (polyvinyl chloride), known as lining, serve indoors without problems. This material is not suitable for finishing the facade. Manufacturers have created a special composition for external finishing works. It is characterized by increased strength, resistance to temperature and mechanical damage.

The main advantage of vinyl blocks is their lightness. They do not significantly increase the weight of the building. The material is plastic, so vinyl siding reproduces as much as possible appearance natural stone.

The disadvantage is considered to be its fragility. Vinyl is inferior to metal in its resistance to temperature changes and is easily damaged during installation. It is less resistant to mechanical damage during operation. Under influence high temperature it can increase in size. This subtlety should be taken into account when calculating the number of finishing slabs.

The texture of the panels imitates granite stone

Acrylic

By technical specifications acrylic siding is similar to vinyl. It has the same advantages as vinyl, but is more resistant to high and low temperatures. The material is neutral to chemical influences.

Stone effect acrylic panels for exterior finishing The cost of facades is slightly higher than their vinyl counterparts.

Volumetric facade panels imitating rocky stones

Fiber cement

A relatively new type of finishing is fiber cement siding. Of the listed types of panels, this is the heaviest. The weight of the blocks is 15 kg, thickness 10 mm. They have increased strength and durability.

The cost of fiber cement siding is much higher than other types. For finishing facades, consumers prefer lighter and cheaper types of slabs.

The color and texture of the finish reproduces granite, rocky stone, rubble or burnt stone. By using modern technologies can be reproduced natural stone with maximum accuracy. The similarity of siding is not only visual, but also qualitative.

Imitation rubble stone

Some types of blocks are not only decorative - they also inside they have insulation on them, so that insulation work can be combined with façade decoration.

If the building is located in an area with a warm climate, finishing the house with stone-look panels made of fiber cement does not require additional insulation of the walls. If the house is located in a cold climate area, you will need additional insulation building.

Therefore, there is no point in buying siding with insulation in cold regions. The installation of blocks with a warm layer is no different from the installation of conventional panels. The cost of warm siding is higher than the cost of simple siding.

Each block is equipped with locks. With their help, fragments are held together. Fixation is carried out by snapping the locks.

Advantages and disadvantages of stone-look facade panels

Stone siding has a number of positive qualities:

long service life (50 years);

resistant to weather factors (wind, high and low temperatures, high humidity, impact sun rays);

not subject to corrosion;

universal – suitable for installation anywhere – on walls, plinth;

easy to install;

there is a large assortment on the market;

Facade panels imitating burnt stone

has low cost;

does not require maintenance;

has a low weight (the load on the surface of façade panels imitating stone is 3-5 kg/m², a natural stone– 53 kg/m², brick – 34 kg/m²);

resists insect damage and fungal infections.

Stone-look panels for external façade cladding are inferior to natural material in strength and durability, but not significantly. Against the backdrop of a large number of advantages, this disadvantage pales.

Video description

Watch the video to see what a house clad in stone panels looks like:

Stone plinth panels

Plinth (literally, a shoe with a wooden sole) is a footing located on the foundation of a building. The load on this part of the buildings is greatest, so to the base itself and to finishing materials increased demands on strength are put forward.

The industry produces special plinth slabs taking into account the installation location. These are blocks of more strong material with increased resistance to damage, temperature changes, moisture, wind, and ultraviolet radiation. Fiber cement siding is ideal for installation on a plinth.

Often the basement of the house is finished with contrasting plates. Installing slabs on the plinth gives the building a more beautiful appearance.

This is exactly the decoration of the facade of the house with stone panels in the photo below:

Using siding that is darker than the base tone has become a popular home decorating element. Plinth blocks have a larger texture. This makes the lines of the house more expressive.

Step-by-step installation

For self-installation Sandwich panels should be prepared:

• screwdriver;

• centimeter;

  hacksaw/grinder;

  pencil/marker/chalk.

Before installation, the walls should be prepared. Residues are removed from them cement mortar, moisture leaks, metal elements. The surface is treated with a special compound that prevents the appearance of fungi and insects. After the solution has dried, begin installing the blocks.

The installation of the slabs is carried out on the prepared sheathing. If it is planned to lay insulation, heat-insulating blocks are installed first.

Step-by-step installation of stone siding.

The sheathing is installed on the wall. For this they use wooden blocks or metal slats. The planks are arranged in increments of 30 - 40 cm. They not only serve as support for the blocks, but also help to ventilate the walls.

Several types of profiles are used in the lathing

The starting bar is set. It is verified by level and the rest of the blocks are oriented according to it.

Mounted corner panels, window. Blocks are installed around doorways.

The following panels are carefully fastened to the corner blocks. The locks should be latched with a smooth movement so as not to break the structure.

Fixation with self-tapping screws is carried out with a small allowance. The cap is not screwed into the sheathing all the way, leaving 1-2 mm.

Each next row of panels is leveled. Sandwich panels should be installed from left to right.

First, the blocks are installed on a flat surface. After installing all the panels, the corner parts are secured. They snap easily onto the mounting profile.

Main condition quality installation sandwich panels - neatness. German Holzplast Wandstein panels have proven themselves well. Plinth blocks require special attention.

Video description

For an example of installation of Holzplast panels, see the video:

When calculating the number of panels, add 10 - 15% to the resulting number. This must be done, since the blocks have to be trimmed during installation.

Before installing the sheathing, you should first make markings in increments of 30 - 40 cm. After the position of the beams has been accurately determined, they are installed on the wall. The correct installation of the planks is checked using a horizontal and vertical level.

The screws are screwed into the center of the holes.

After installation launch pad pull the thread from the panel to opposite corner. The correct tension is checked with a level. All lower blocks are installed according to this guideline.

The installation of basement blocks is completed by installing a drainage system. It is placed on the top horizontal surface base Metal elements are used for this.

Where is the best place to buy panels?

Manufacturers produce sandwich panels designed for the various financial capabilities of the end buyer. In Moscow, the cost of slabs starts from about 900 rubles per m². By purchasing facade slabs from certified manufacturers, we must remember that, unlike counterfeits, the price of the material is also affected by the rental of premises, the number of intermediaries and the wages of store employees. But in return you get high-quality products that come with a guarantee.

In addition, many manufacturers are beginning to master the sale of stone-look facades in online stores, which allows customers to save money and time.

Facade panels for exterior finishing are a popular option for cladding walls and giving the building a finished look. Our catalog contains various panels for finishing the facade, imitating stone and brickwork domestic and foreign manufacturers.

Facade panels for stone and brick

Facade panels imitating stone and brick demonstrate a wide variety of colors, textures and models. Thanks to this feature, you can give any building a unique look. However, besides the beautiful decorative properties This finishing material has important practical qualities:
Provides protection of facades from precipitation and other negative natural phenomena, thanks to which you can definitely forget about periodic renovation of the facade (depending on the manufacturer, this period can be 20-50 years);
Increases thermal insulation performance: drafts practically disappear and thus heat loss is practically reduced to nothing. In addition, sound insulation is improved, so that extraneous noise from outside will practically not disturb you;
The use of finishing panels can hide flaws, geometric deviations and unevenness of the facade.

Facade panels: materials

Facade panels are based on various materials: aluminum, zinc, steel, top coated polymer layer. It is thanks to the topcoat that this type of finish exhibits a wide variety of colors, patterns and textures. The metal sheet located at the base of the panels provides them with strength and durability.

Buy facade panels in Moscow and the Moscow region

Buy facade panels with delivery in Moscow and the Moscow region at the most affordable prices You can in the store building materials Krovla.msk.ru. We are pleased to offer you wide choose facing panels of various textures, colors and models, so that you can certainly choose the most suitable option. You can also purchase everything you need to organize your roof from us.

The original decoration of the facade of the house with stone-effect panels, the photo of which you see on this page, allows you to obtain a decorative and respectable facade at the lowest cost. In addition, this particular finishing option is characterized by minimal weight, which cannot be compared with the weight of a facade made of natural stone.

If you are considering decorating the facade of your house with stone panels as an option, the photos will help you solve 3 problems:

1. First, choose which texture option. Will it be wild stone or it will be granite paving stones.
2. Next, you can choose the material of the panels that you will use based on the options. Some panels are made from metal, others from plastic.
3. Having chosen the panel material, you can begin searching for a panel manufacturer that is represented in your city.

Thus, if you are planning to decorate the facade of the house with stone panels, photos of the options will do their job important role at the planning stage, allowing you to save cash and saving you from purchasing trial samples.

Which panels to choose - plastic or metal

The choice of plastic or is, as they say, a matter of taste, as well as the influence of specific local conditions.

For example, modern manufacturers of facade panels offer more color and texture options in plastic. But metal panels more durable.

It turns out that if your house is located on a relatively large fenced area and it is important for you to give it more decorative look, you can use plastic panels to look like stone.

If your house faces a roadway or pedestrian street path in a village or city, then you should pay attention to metal panels that imitate. In this case, strength is more important than the decorativeness of the material.

Decorating the facade of a house with stone panels - photo gallery

We also present to you several options for decorating the facade of a house with stone panels. Look at the photos and choose the options that you like best.

After this, decide on the material of the panels, and then you can begin to search for specific color and texture options that are offered by trade organizations near your home.

The starting profile is used to protect the end faces of PVC panels from damage. It is also used for finishing windows and door frames, slopes in places adjacent to...

We will send the material to you by e-mail

Ventilated facade systems use façade panels for exterior finishing of a house made of different materials with different formats and methods of attaching individual elements to each other. They are hung on frames made of timber or galvanized profiles, imitating natural wood, natural stone or facing brick.

Exterior facade panels

Review of types, characteristics, brands

Facade panels for exterior decoration of a house are classified according to several criteria:

If it is necessary to simultaneously insulate + decorate the facade, the subsystem (profile or block) is attached to the wall with brackets after insulation of its outer surface. This is necessary to eliminate cold bridges.

Helpful information! Laying basalt wool or extruded polystyrene foam inside the sheathing cells is a violation of technology. If only improvements to the building's exterior are required, the sheathing can be fixed directly to the building envelope without brackets.

Metal

There are façade panels made of aluminum, stainless steel, and galvanized steel. Unlike budget linear panels used for finishing industrial buildings, sports complexes, siding, cassettes have a more noble appearance, lamination, 3D texture.

Even with double-sided coating polymer materials steel panels are subject to deformation and accumulate static electricity, require thermal insulation. Aluminum does not have the last two disadvantages, but is much more expensive.

Polymer

Of all existing polymers For external cladding PVC (vinyl) is usually used. There are façade vinyl panels for exterior decoration of two types of houses:

• basement siding– rectangular modules measuring about 120 x 50 cm, imitating stone/brick;

Manufacturers provide a wide range of additional elements that allow high-quality decoration of junction points, cornices, ebbs, and slopes of cottage openings.

Composite

Range composite panels, used for decorating facades, are much wider:

• fiber cement – ​​the filler is cellulose (up to 90%), which allows decorative embossing on the front surface;

• porcelain stoneware – slab sizes 1 x 1 m – 1.2 x 3.6 m, the material can be cut with a glass cutter, it is environmentally friendly, inert to solar ultraviolet radiation and household chemicals;

• aluminum composite – price square meter from 1000 rubles, fastened with rivets, can have a wave or a flat surface on the front side;

• clinker - has a layer of insulation, has a maximum service life, but unnecessarily loads the load-bearing structures.

Composite material is always more expensive, however, it has a high service life and original design.

Glass panels

Original translucent panels are laminated, reinforced or hardened, obtaining high vandal resistance or dust resistance. This material has light/visual effects (opacity, dullness), and is usually used to finish the lower floor of a half-timbered building.

Helpful information! Glass panels should not be confused with facade glazing systems. Finished enclosing structures are sheathed with these materials. Independent walls they are not.

Sandwich

In private construction, prefabricated and monolithic sandwiches are used extremely rarely. This material is structural because when polyurethane foam/expanded polystyrene is pressed between two profiled sheets, the slabs obtain sufficient rigidity.

Sports complexes, hangars, and warehouses are built from them. Prefabricated sandwich buildings can be dismantled for transport to a new location.

Related article:

Installation features, advantages and disadvantages

Facade fiber cement panels for exterior finishing of a house, the photo of which is presented above, are attached to the subsystem sheathing with clamps, like most other claddings with a thickness of 16 - 25 mm.

For thin-walled decors, a riveter is used (only on a steel profile) or self-tapping screws, nails on bar battens.

Helpful information! Rigid fixation is only allowed for materials with low linear expansion. In other cases, it is necessary to ensure one degree of freedom during horizontal movements.

Thermal panels have a layer of insulation that must be placed in close proximity to the wall. Therefore, they must be glued to the enclosing structures without an air gap. In sandwiches, the heat insulator is located between metal sheets, therefore they are used as wall material.

A budget option for decorating the exterior of a cottage is plastic facade panels for exterior decoration of the house with an outer layer that imitates natural material.

To increase the service life of the ventilation façade, they use composite materials and metals.