≡× MENU

• Interior
• Window
• Walls
• Projects
• The buildings

Choosing polyurethane foam. Which polyurethane foam is the best? Review, characteristics, reviews Which foam to choose for installation

Anton Tsugunov

Reading time: 6 minutes

Properly selected and correctly applied polyurethane foam for windows is an important component of their high-quality installation. It is difficult to imagine installing modern PVC window structures without this easy-to-use and reliable material. A novice master will have to understand the differences and features of foam in order to choose a composition from the wide range offered by stores.

Properties and scope of material

Polyurethane foam is a liquid polyurethane solution pumped into a container under pressure. When exposed to air, it quickly hardens and at the same time increases significantly in volume.

There are 2 types of foam expansion:

1. Primary (when the composition leaves the cylinder). Provides ease of use: the solution can effortlessly fill any shaped recesses.
2. Secondary. Among the disadvantages: an increase in the volume of sealant during final polymerization can deform the window elements. Therefore, it must be taken into account when carrying out work.

Completely hardened material acquires unique useful qualities:

• Low thermal conductivity is achieved due to air bubbles located in the thickness of the frozen material. If not for the price, foam could well be considered as an alternative to conventional insulation materials.
• The presence of air voids increases the sound insulation of the entire window design: vibrations transmitted to the window are damped by foam. Thus, it complements the installed rubber seals, enhancing soundproofing.
• Cured foam does not allow penetration electricity, has water-repellent properties, is not susceptible to rotting or mold.

• High adhesion rates make it possible to use foam as a fixing material: it securely fixes window or door frames, as well as other elements, in place.
• Depending on the brand, the composition does not support combustion or is completely resistant to fire.

Thanks to its special properties, the foam is ideal for exterior and interior use. But, like any material, it has disadvantages:

• After hardening, the excess composition is cut off. And if the cut surface is not treated appropriately, then water will get into the open pores. Over time, this causes the material to deteriorate.

• The frozen composition does not withstand exposure to ultraviolet radiation, so it must be protected from direct contact sun rays.
• You have to follow the rules for storing cylinders: strictly in a vertical position at a temperature range from +5 ˚С to +25 ˚С.

The high adhesion of the foam allows it to reliably adhere to surfaces made of different materials. Therefore, you should work with the composition very carefully: if it gets on your hands or other parts of the body, you can only wipe it off with the top layer of skin, which will take at least several days. When pouring, be sure to use gloves. You should also securely cover all surfaces on which the solution may drip.

If foam does get on the floor, furniture or other surfaces, it can be removed in several ways, which are described.

The use of this design provides the following advantages:

• The ergonomics of the gun allows the master to fill cracks with one hand. The second remains free, due to which you can work alone at certain stages.
• The gun makes it possible to accurately dose the volume of solution released. This reduces consumption by reducing unnecessary waste.
• A thin, long nozzle will easily deliver the solution into hard-to-reach cracks and holes.
• The cylinder can be used in any position.
• The reusable valve ensures the safety of the solution between repairs.

When choosing professional cylinders, you do not need to solve the frequently asked question: where can the remaining solution be usefully used?

• Professional compositions have better performance characteristics than household ones. For example, they have a lower secondary expansion coefficient, which makes them more convenient to use.

Techniques for pouring foam using a professional gun are shown in the following video.

Mr. Build strongly recommends: for installation plastic windows use only professional polyurethane foam. Secondary expansion will not create unnecessary load on the structure or displace frame elements. The density of the professional compositions is maximum, and this will ensure the best quality of fastening, insulation and seam sealing.

Choose a gun based on budget, ergonomics and service life. For a single procedure, the cheapest one with plastic parts will do, but for professional use give preference to collapsible high-quality models.

Household foam has less outstanding performance characteristics: worse adhesion, a higher coefficient of secondary expansion, and less material yield from the cylinder. It is sold in containers equipped with a plastic tube for supplying the solution. It is screwed onto the valve before blowing begins. It is recommended to use the entire bottle at once.

Working with household foam is less convenient: both hands are used, and the can must be placed bottom up. This will ensure a more complete release of the solution. Use it with extreme caution, in the least important places. Fill the seam to no more than 50% depth!

Soundproofing foam

If the windows themselves do not transmit noise, then the polyurethane foam on which they are mounted is an excellent conductor of noise, since it is light, hard, and has a closed cellular structure, which facilitates the unhindered passage of sound waves.

Compared to ordinary construction foams, the use of MAXFORTE SoundFLEX foam adds more than 10 dB to sound insulation, which is equivalent to reducing noise by 2-3 times.

The difference between regular mounting foam and soundproofing foam can be seen in the video:

If you squeeze a piece of polyurethane foam in your hand, it will simply collapse, unlike specialized soundproofing foam. Like a sponge, it will return to its shape. It does not harden and thus does not become a sound bridge.

Winter or summer?

Foam is divided according to the seasonality of its use. It happens:

1. Summer, suitable for work at temperatures above +5 ˚С.
2. Winter, allowing you to seal cracks at temperatures down to -18˚ C.
3. All-season. Seen and used less frequently. Professionals advise using it during transition periods in autumn and winter or getting by with the first two varieties.

Flammability of foam

The compositions also differ in flammability parameters:

• B1 – the highest fire safety class, does not ignite even upon contact with open fire.
• B2 – does not burn on its own, without an additional heating source. Such compositions are called self-extinguishing.
• B3 – lowest flammability class. This material is not recommended for use, especially in residential areas.

Rules for choosing foam for installing PVC windows

The composition most suitable for a particular case is selected. What to look for when choosing?

• The temperature at which the cracks will be sealed. It is used to choose winter, summer or all-season foam.
• On the secondary expansion coefficient. The lower the value, the better. It is recommended not to use formulations with an indicator of more than 15–20%. Professional foam easily fits into such a framework, but with household foam the choice should be made carefully.
• For the expiration date. No one can predict how the behavior of the solution will change after storage time. It's better not to take risks.
• To the fullness of the cylinder. Underfilling is a common occurrence. It’s easy to check: to do this, weigh the canister. A full container of 750 ml weighs about 900 g.

HELPFUL INFORMATION: How to paint wooden floors in an apartment: review of materials

Polyurethane foam is widely used in construction work and during repairs. Therefore, it is not surprising that today almost every amateur repairman is faced with the question of which polyurethane foam is better. We invite you to take a look at the rating of the 5 most popular brands of this product, compiled according to professional builders. But first, let’s look at what high-quality polyurethane foam should be.

Level of quality

Professionals regularly test products from various manufacturers to identify the best sealant. When choosing a good product, they, first of all, focus on following points:

1. The polyurethane foam should adhere perfectly to any surface and not flow from it.
2. It does not decrease in size after final drying, that is, it does not shrink significantly.
3. High-quality products are characterized by elasticity.
4. It does not create cracks in the cold and does not crumble.
5. The weight of the cylinder should be on average about 910 grams (taking into account the foaming substance equivalent to 750 ml).

The modern market is actually full of different types of this product, but this does not mean that any polyurethane foam offered by the manufacturer is of high quality. Often, the shelves of construction markets receive products that do not meet the established requirements: for example, in the form of a traditional propellant gas, toxic substances are included in the composition of the foam, which are very harmful to the ozone layer and, of course, to health.

IMPORTANT: there are cases where companies simply underfill MP into the cylinder. Of course, not only the quality of the product suffers from this, but also the consumer himself. Therefore, be careful!

Features of MP

What is polyurethane foam? It is a liquid polymer that hardens after a certain time. In order for this product to have the consistency of foam, the polymer is mixed in a cylinder with a specific gas. MP can be produced in two variations:

Among the disadvantages: often the indicated volumes of foam do not correspond to reality. Of the 65 “declared” liters, there are often only 45 in the can. Remember this and keep your receipts.

5 leaders

Taking into account the above points, our professionals have identified several brands that, in practice, have the best performance properties. These are “Moment Montazh”, “Makroflex”, “Soudal”, “Titan O2”, “Penosil”. The MP of these companies is productive in work on insulation and filling of panel seams.

The choice of specialists is justified by the following factors:

• The level of adhesion of polyurethane foam to the seam surfaces. This is one of the defining points: if the seam is more than 50 mm wide, then the MP layer can simply fall out of it. There will be a need to create a second “foam” layer, which requires additional material costs.
• The degree of porosity of the sealant on the cut. In case of high porosity, the thermal insulation properties are reduced, since there are cavities in the foam various sizes. This means that when sealing seams you will need large quantity mastic for filling all holes.
• Exit of polymer from the container. At the same time, you can check whether the package actually contains the volume declared by the manufacturer.

Let's look at the products of our leaders in more detail and objectively.

Moment Installation

One of the most popular brands in its segment. You can find it in any construction market. MP of this brand is produced in adapter and industrial variations. It is used in most construction works, and at any time of the year.

The main function of the sealant is to fill voids in the structure and seal the seam. The foam itself has a high uniform density and adheres well to most surfaces. Used for external and interior renovation. It holds up well to further painting.

Among the disadvantages: the sealant has significant secondary expansion; there are often cases when the MP slightly moves the window sills or door frame. Of course, this is not typical for such a brand, but hackwork sometimes occurs. Poor quality products can be recognized by their unpleasant odor and pungent yellow color. After a year, this sealant loses its elasticity. Average price – 320 rubles.

"Makroflex"

One of the most popular and famous brands. Plus, it is considered the most economical. It is used for summer and winter use and adheres perfectly to absolutely any building materials. The sealant has a visually homogeneous structure and conducts a minimum of secondary expansion. The declared yield is on average about 25 liters.

The range of applications is quite extensive: traditional sealing, excellent heat and sound insulation, installation of door and window frames, plumbing repairs.

However, there are disadvantages. Sometimes among the sealants of this brand there is an outright defect, which also applies to the pistol. In this case, either one polymer comes out of the Makroflex cylinder, smearing everything around it, or only gas, and after the release of a small volume of “foamy” substance, splashes appear.

Another drawback that experts warn about is serious shrinkage. After using low-quality products, you have to cut off the cavities and “add” the lack of volume there. The average cost is 200 rubles. (capacity – 0.75 liters).

"Soudal"

Less popular polyurethane foam, but one of the most worthy in the quality category. Several variations of the product are available: for summer and winter, as well as a separate type - fire-resistant. In winter, Soudal operates at a maximum temperature of minus 20°C. Does not contain toxic additives, does not have unpleasant smell.

Conducts slight secondary expansion and adheres well to the surface. The structure contains a minimum of pores and a maximum of density. Scope of application: sealing and insulation of roofs, installation various designs, pipe insulation, plumbing repair. It does not shrink, hardens instantly and, most importantly, evenly.

Among the disadvantages: “Soudal” does not tolerate ultraviolet light well, so if you do not cover it protective paint, then after a year it will crumble and take on an unpleasant brown tint. Average cost – 250 rubles.

"Penosil"

Also not a particularly popular brand, but very high quality. The product is dense and uniform, and practically does not produce secondary expansion or shrinkage. This is a champion among MPs in terms of output volume. Effective for internal work during fixation and installation of structures, excellent in filling cavities and seams. Virtually odorless, white in color.

Among the disadvantages: Penosil is not suitable for outdoor use: it no longer works at -4°C and +35°C. During hot weather, the sealant refuses to foam, so it simply flows out. Average price – 220 rubles.

"Titan O2"

This is the most respected brand among professionals. Titanium is quite economical, but does not lose quality. It is non-toxic and adheres well to all surfaces. It has a fine and dense structure, holds volume well, and does not shrink or expand. The foam yield is average.

You can choose an acceptable Titan series: for the winter period and products with increased fire resistance. Scope of application: installation of pipes, repair of heating systems and water supply. Experts also recommend using it for thermal insulation.

Among the disadvantages: poor tolerance to ultraviolet radiation, fragility: after a year, Titan begins to crumble, lose elasticity, and darken. However, nothing like this is observed indoors. Average cost – 230 rubles.

Conclusion

As you can see, even the most popular types of polyurethane foam misfire in some cases, so you shouldn’t rely on the brand when choosing the right product. We suggest looking at things objectively and buying products that not only live up to their big name, but also have significant advantages in use.

Man has built always and everywhere, in all centuries and on all continents. Temples, pyramids, houses and defensive structures were built from various materials, but they all had one common problem - building materials cannot fit perfectly tightly together. The resulting voids were filled with available material: moss, sand, mortar or small stones. All these methods did not provide sufficient tightness or sound insulation, and most importantly, they were very labor-intensive and energy-consuming.

The emergence of modern materials and technologies has made life much easier for builders and installers. Polyurethane foam does in the blink of an eye what a person previously spent a lot of working time on. Using a mounting gun or a bottle with an applicator tube, in a matter of minutes you can fill any voids in the structure, insulate and seal joints and seams.

We have compiled a list of the best polyurethane foam based on expert assessments and reviews from real customers. Our recommendations will help you make a choice that suits your needs and desires. There are many competitors in the global technology market, but we have selected the best manufacturers and we recommend paying special attention to them:

1. Makroflex
2. IRFix
3. TYTAN
4. Penosil
5. Remontix

For windows/doors Professional Under the gun

*Prices are correct at the time of publication and are subject to change without notice.

Mounting foams: For windows/doors

*from user reviews

Minimum price:

Main advantages

• Universal polyurethane foam for use with a special gun. Suitable for installation or insulation works, sealing joints and seams, filling voids
• Thanks to all-season characteristics, it can be used in a wide temperature range from -10 to +35 degrees Celsius
• After final hardening, it is non-toxic and non-flammable, which increases safety of use. Curing time and cutability after one hour
• A high adhesion rate (adhesion to other materials) allows the foam to be used on any surface except polyethylene, teflon or polypropylene
• Has good sound and heat insulation properties, high filling capacity, regardless of different climatic conditions

For windows/doors / Frost-resistant (all-season)/ Under the gun / Professional

Main advantages

• Professional one-component polyurethane foam with increased output. Designed for use in winter period
• The cylinder is equipped with a special valve for working with an applicator gun, which guarantees precise application and economical foam consumption
• Hardens due to exposure to ambient air. Special cell structure ensures high mechanical strength
• Polyurethane foam is a self-expanding material with minimal pressure after expansion and hardening. This ensures dosing accuracy during application to the surface
• It has good thermal and sound insulation characteristics and adhesive ability, which has a positive effect on the quality of work performed

From this article you will learn which polyurethane foam is best for various construction and repair tasks and what characteristics you should pay attention to when choosing it. The presented rating of polyurethane foams is based on user reviews and tests conducted on various resources on the Internet.

How to determine which polyurethane foam is better

To choose the right polyurethane foam, you need to understand what characteristics and qualities it has. Can be used for different tasks various properties this building material.

So, the main characteristics of polyurethane foam:

• Viscosity is a property on which the heat and sound insulation characteristics of foam depend. The lower the viscosity, the worse these qualities and the faster material will be destroyed. The degree of viscosity directly depends on temperature and air humidity.
• Adhesion - the ability of foam to stick to various materials to which it is applied. As a rule, high quality foam has good adhesion to most building materials, with the exception of polyethylene and Teflon. The higher the adhesion, the tighter it fits, and therefore the better the insulating properties.
• The output volume of foam is how many liters of foam you get from one can.
• Primary expansion is a property that shows how much the volume of released foam will increase in the first minutes after leaving the cylinder. The expansion of a good polyurethane foam should not exceed 30% of the original volume.
• Secondary expansion is the final increase in foam volume after polymerization. The lower this value, the better - foam with low secondary expansion will not lead to deformation of the structure in which it is used.
• Uniformity of structure. This property shows how evenly air bubbles are distributed throughout the volume of foam, and how equal they are to each other. In high-quality foam there should be bubbles small size, evenly distributed throughout the entire volume of the material.

Household or professional polyurethane foam

All types of polyurethane foam can be divided into two large groups– this is professional and household foam. Professional foam can only be applied using special tool- pistol.

Polyurethane foam for the gun.

Household foam is produced with a tube (special applicators) and does not require the use of a gun.

Polyurethane foam for the tube.

Naturally, household polyurethane foam cannot be used for professional purposes - it simply will not cope with the tasks. But the reverse replacement (professional foam for household purposes) is quite acceptable.

The volume of pistol foam, as a rule, is 3 times greater than household foam, provided the weight of the cylinders is equal. This is due to the fact that household foam coming out through a tube has a high density and low yield. Also, household foam polymerizes slowly and has a high expansion.

The method of extracting foam from a container directly affects its subsequent properties. Professional installation requires the use of only gun foam. Household foam is useful only for local repairs(fill a hole, seal a gap, etc.) at home.

Winter, summer or all-season

Polyurethane foam is divided into three types, depending on the temperatures at which it can be used:

Summer – can be used at air temperatures of +5 – +35 degrees.

Winter - used in temperatures ranging from -10 to -35 degrees.

All-season – can be used both in winter and summer, at temperatures of -10 – +35 degrees.

It is important to use mounting foam that is suitable for the air temperature. The fact is that it tends to reduce its volume when it gets colder. Therefore, summer foam in winter will not be voluminous enough. Range permissible temperatures usually indicated on the cylinder.

It should also be remembered that temperature requirements are presented specifically for installation, and not for use. Cured foam has the same properties and the same characteristics at temperatures from -40 to +90 degrees.

What kind of foam is considered high quality?

How to understand that you have high-quality polyurethane foam in front of you? Not always and not everyone has the opportunity to purchase several cylinders for comparison.

Therefore, you should pay attention to the following signs indicating high quality foam:

1. Packing condition.

The absence of mechanical damage and chemical influences on the packaging indicates that the material was stored under proper conditions, therefore, it must meet the requirements.

2. Expiration date and release date.

Do not buy polyurethane foam that is nearing its expiration date. The fresher the sealant, the higher performance qualities he will possess.

The expiration date may be indicated on the bottom of the container or on its top:

1. Mixture homogeneity.

This parameter can be easily checked before purchasing without using foam. Just turn the can upside down a few times and shake it. If the contents flow smoothly, without sudden drops of substances downwards, then the material is of high quality. If impacts are felt, then the hardening process has already begun, and it is better not to buy such foam.

4. Expansion coefficient.

A high expansion coefficient will not always be in demand, since foam, increasing in volume, can deform the structure. However, if it is necessary to fill cavities for the purpose of sealing, this quality will be one of the most important.

High-quality household foam has an expansion rate of up to 60% of the original volume. This figure for professional pistol foam can reach 300%.

5. Foam color.

Unfortunately, this characteristic can only be assessed after opening and using the cylinder. High-quality foam has a light yellow color. Darkening of the sealant indicates the beginning of polymerization.

1. Adhesion.

This is the ability of a sealant to adhere to materials, measured in mPa. Adhesion of polyurethane foam ranges from 0.4-0.48 MPa. The higher this value, the better the sealant.

What you need to know about polyurethane foam manufacturers

Polyurethane foam is produced using complex technology that requires the use of high-tech, expensive equipment. Therefore, the number of producers construction sealant limited in the world. Moreover, only a few brands enjoy deserved popularity due to the high quality of the product.

However, so-called contract brands are entering the market, producing polyurethane foam under a contract. The label of such cylinders usually does not display information about the manufacturer. It may simply be written - made in Russia or Europe without indicating the company.

Such marking should immediately alert the buyer and, at a minimum, force him to pay attention to other signs characterizing the quality of the material.

It is not recommended to buy contract foam, because at a similar price it is of worse quality compared to original manufacturer. The fact is that the owner of a contract company wedges himself into a well-coordinated chain of Manufacturer - Dealer - Seller - Buyer.

Naturally, he also needs to earn money, and therefore he has two options: increase the price of the product, or reduce production costs, which will inevitably lead to a decrease in quality.

The best manufacturers of polyurethane foam

The selection of products was made on the basis of reviews, opinions and ratings of users posted on various resources on the Internet. All information is taken from public sources. We do not cooperate with manufacturers and brands and do not encourage the purchase of certain products. The article is for informational purposes only.

Penosil polyurethane foam

Penosil takes first place among the best polyurethane foams. Its products are distinguished by the highest quality, reasonable price, and record output volume. In addition, the foam of this manufacturer boasts the absence of shrinkage and secondary expansion.

Let's first look at Penosil household foams:

PENOSIL Premium Foam Winter. Used for filling voids, installation structural elements and isolation. It is characterized by ease of use, uniform structure, excellent adhesion to all materials and demonstration of high-quality results at any temperature.

PENOSIL Premium FireRated Foam B1. Used for installation and insulation of fire-resistant doors. This type of foam is also used for insulation and installation of pipelines and power lines in passages. The sealant has excellent filling properties and has increased resistance to open fire and high temperatures.

PENOSIL Premium Foam Winter is used for filling voids, installing structural elements and insulation. It is characterized by ease of use, uniform structure, excellent adhesion to all materials and demonstration of high-quality results at any temperature.

PENOSIL Premium FireRated Foam B1 is used for installation and insulation of fire-resistant doors. This type of foam is also used for insulation and installation of pipelines and power lines in passages. The sealant has excellent filling properties and has increased resistance to open fire and high temperatures.

PENOSIL Standard Foam All Season - foam for sealing seams, sealing cracks and holes, as well as filling voids. Can be used to seal building structures. The advantage of this sealant is its versatility - it can be used both indoors and outdoors.

PENOSIL Standard Foam is a household sealant used for sound and heat insulation, filling voids, sealing cracks and seams. It has excellent filling characteristics and can be used indoors and outdoors.

PENOSIL Standard Foam Winter - mounting foam for sealing cracks, voids, seams, as well as for installation of various structures. Can be used at low air temperatures, during the cold season. Has excellent filling ability and adhesion.

PENOSIL Premium FastFoam 2K is a foam with increased speed polymerization. After use, the foam can be cut after just 15 minutes.

Now let's look at professional pistol-type mounting foams:

PENOSIL Gold Gun is a foam used in areas where high quality standards are required. It is used when installing tiles, wall panels, warm insulating materials, windows, doors and other structures. It is characterized by a uniform composition and rapid hardening. Can be used under various external conditions.

PENOSIL Gold Gun Winter is a sealant that is used when installing roofing and wall materials, insulation, doors and windows. It is also used when installing various structures that require high quality. Main advantages: accurate dosage and consumption, high polymerization speed, uniform structure, same quality when used under different conditions.

PENOSIL Gold Gun 65 is a strong mounting foam that is used when performing large-scale work that requires increased consumption of sealant. For example, it is used when installing doors, windows, wall panels, and tiles. It has a low degree of secondary expansion and excellent adhesion.

PENOSIL Gold Gun 65 Winter is used during extensive work on the installation of doors, windows, insulation, wall panels, roofing materials and other structures. The sealant has a uniform structure and can be used under various external conditions.

PENOSIL GoldGun 65 Plus All Season is an all-season professional polyurethane foam designed for large-scale work that requires high quality standards. Foam can fill voids in concrete, brick, wood and plasterboard structures. Advantages: environmental friendliness, excellent adhesion, accurate dosage.

PENOSIL GoldGun Low Expansion All Season is a pistol-type polyurethane foam with slow expansion. It is used in pressure sensitive structures. The use of this sealant will not lead to destruction of the structure or damage to its individual elements, which determines the scope of application of this material.

PENOSIL Premium Gunfoam is used for sealing windows and doors, and pipe installation. It has a uniform composition and good adhesion.

PENOSIL Premium Gunfoam Winter - foam for installing windows, doors, pipes and other structures, as well as for filling openings. It has a uniform structure and demonstrates high quality in different conditions.

PENOSIL Premium Gunfoam 65 is a professional foam with increased yield (15% more than regular foam) with a low degree of expansion. Used for insulation and installation of pipes, windows, doors. PENOSIL Premium Gunfoam 65 Winter is a foam with similar characteristics, used at low temperatures.

PENOSIL Premium FireRated Gunfoam B1 is a fire-resistant professional mounting foam with low secondary expansion. Used to install fireproof doors.

PENOSIL Standard Gunfoam - foam for sealing seams, filling voids and openings, installing various structures. Has good adhesion to all materials.

PENOSIL Standard Gunfoam 65 Winter is a polyurethane foam that has an increased yield and can be used at temperatures down to -10 degrees.

PENOSIL Standard Gunfoam All Season is an all-season sealant for filling voids, seams and holes, demonstrating high quality, both indoors and outdoors.

Penosil Standard Gunfoam 65 foam with a yield of 15% more than standard types. Has improved heat and sound insulation.

Polyurethane foam Soudal

Soudal is the largest manufacturer of polyurethane foam. The company was the first to market low-temperature, low-expansion sealants. This company also owns a patent for the Genius Gun applicator, which has many advantages over manual cylinders. Soudal produces pistol foams and cans with applicators.

Let's look at the most popular brands of Soudal foam:

Polyurethane foam Comfort with Genius Gun applicator. All-season polyurethane foam with a patented Genius Gun applicator, which allows you to conveniently apply the foam while allowing the can to be used several times without the risk of the valve jamming. Used for filling voids and cracks, thermal insulation of heating and sewerage elements, installation of doors, windows and window sills.

Winter polyurethane foam with Genius Gun applicator. The foam can be used at temperatures down to -10°C and is equipped with a convenient applicator. It is used for sealing cracks, thermal insulation of heating and sewerage elements, installation of window and door frames.

Soudal spray foam. It has low expansion, high performance and dimensional stability. Thanks to its low expansion, it is suitable for mounting thin PVC profiles. Can be used for any finishing and installation work.

Winter pistol polyurethane foam Soudal. Can be used at temperatures down to -10°C, while the foam has low expansion, like its summer counterpart. Can be used for any installation work.

Polyurethane foam Windows Doors with Genius Gun applicator. Polyurethane foam with a special applicator ensuring convenient application and use of the balloon with temporary pauses, without the risk of valve jamming. The main purpose is the installation of door and window boxes, but can be used for sealing cracks and joints.

Polyurethane foam Tytan

Tytan is a Polish company that produces high-quality polyurethane foam. At a low cost, this sealant is characterized by high quality and excellent insulating properties.

Let's look at what brands of polyurethane foam this manufacturer produces:

TYTAN Professional 65 UNI has a yield of up to 65 liters with a weight of 1 kg, and has increased resistance to moisture and mold. Once hardened, it does not release harmful substances. Used for professional installation of doors and windows.

TYTAN Professional GUN is a professional foam that does not emit harmful chemicals and has excellent sound and heat insulation. Used for installation and sealing of doors and windows, as well as for insulation.

TYTAN Professional 65 is a polyurethane foam that does not deform structures during primary and secondary expansion. This property determines its scope of application - when installing vulnerable external loads door and window structures.

TYTAN Professional B1 is a fire-resistant professional foam that perfectly insulates against smoke and fire. It is used when installing fireproof and fireproof structures - partitions, windows, doors.

TYTAN Professional Low Expansion is a foam with increased performance and controlled expansion. It is used for sealing PVC and wood window frames, filling voids and cracks.

TYTAN Euro-line GUN is a professional polyurethane foam with secondary expansion up to 150%. Thanks to the presence of a special valve, gas leakage and dirt from getting inside the cylinder are prevented. Used when installing windows and doors, insulating various structures.

STD polyurethane foam with the new ERGO applicator has the following advantages: precision of application, possibility of use for 60 days after opening, ergonomics, ease of use, high heat and noise insulation. Typically used for sealing, sound and heat insulation.

TYTAN Euro-line STD has a high degree of secondary expansion, amounting to 280-320% of the original volume. Used for professional installation and insulation of doors and windows.

TYTAN Professional STD is a winter polyurethane foam used at air temperatures in the range of -10 – +30 degrees. Has excellent thermal and sound insulation. Used for installation, insulation and sealing of windows and doors.

TYTAN Euro-line STD is a winter polyurethane foam equipped with a new valve that eliminates gas leakage and clogging. It has a wide range of applications - heat and sound insulation, installation of structures, filling voids and seams.

Illbruck polyurethane foam

Illbruck is a brand of professional foams that are easy enough to handle that even a beginner in construction can handle them. The cylinder has a special valve combined with a spray nozzle and a gun. The manufacturer produces a wide range of foams: winter, summer, fire-fighting, elastic and two-component.

The manufacturer produces the following brands of polyurethane foam:

FM070 SUMMER - foam with a high volume output (65 liters) and excellent adhesive properties. In construction and repair it is used for insulation and sealing of seams in windows, doors and other structures.

FM070 is a polyurethane foam that can be used at air temperatures down to -10 degrees. The cylinder has a universal valve that is compatible with the gun and nozzle. Designed for sound and heat insulation, filling voids and seams, fixing door and window structures.

FM310 is a gun foam with a high specific gravity sealant and excellent insulating properties. It is used during the installation of windows and doors to seal and fix them, as well as fill the resulting voids.

FM330 is a polyurethane foam with increased elasticity, uniform composition and low pressure on the structure during expansion. Can be used when installing door and window blocks even at low temperatures.

FM341 is a winter polyurethane foam that can be used at temperatures from -10 to +35 degrees. The presence of a universal valve allows you to use both a spray nozzle and a gun. This foam is used for insulation, sealing and insulation of seams that arise during the installation of doors and windows.

FM710 is a professional two-component foam with increased mechanical resistance. Used when installing doors and windows that experience increased mechanical loads.

FF197 – fire-resistant foam with fire protection up to 240 minutes, has high resistance to elevated temperatures, chemicals, moisture. Can be used for insulation and insulation of doors, hatches and windows in rooms with increased fire hazard.

Polyurethane foam Moment

Moment polyurethane foam has a low price and quality comparable to its European counterparts. The line includes several models, differing in application conditions and foam characteristics. Moment Installation is used when installing and sealing doors, windows, roofing elements, as well as for filling seams and voids. This foam has good adhesion, is resistant to moisture and UV rays, and has increased sound and heat insulation.

The manufacturer produces the following brands of foam:

Moment Installation Standard - foam with high heat and sound insulation, resistant to humidity and aging, and has good adhesion. Used for installing windows and doors, sealing seams, filling voids and insulating structures.

Moment Installation All-season - foam, used in a wide range of temperatures, has good adhesion to almost all building materials. It is used to seal holes, joints, cavities, as well as to seal door and window blocks.

Moment Montazh 65 is a tubular one-component foam equipped with a convenient turbo nozzle that increases the yield of sealant up to 35%. Used for sealing roofing structures and insulation of doors and windows.

Moment Installation Professional – pistol-type foam, characterized by high precision of application and dosing. Used for sealing seams and openings, heat and sound insulation of roofing structures and partitions.

Moment Installation Professional All-season – one-component pistol foam, used at positive and negative temperatures (up to -10 degrees). Used to create soundproofing screens and to seal seams around pipes, windows and doors.

Moment Installation 65 Professional - pistol polyurethane foam with high thermal and sound insulation, and increased yield (up to 35%). They are used when installing doors and windows, sealing and insulating various structures.

Moment Installation 65 Professional All-season – one-component foam with high precision of dosage and application, which can be used at air temperatures from -10 to +35 degrees. Used for sealing seams, insulation and sound insulation of various structures.

Moment Installation Fire-resistant - foam with excellent fire resistance (class B1) and fire safety (class B). Used for installation, compaction and insulation of structures operated in conditions of increased fire danger.

Polyurethane foam is a modern building material, without which it is impossible to imagine installing windows or doors. It can also be used to seal cracks in masonry and fill any other cavities. The market offers a huge range of this type of product, professional (for mounting gun) and adapter types.

Our review contains the best polyurethane foams for construction work. The rating position is based on the characteristics of the product, as well as reviews from professional builders who constantly work with this material.

Often there is too much foam to fill a small volume of voids. Often people throw away most of the material due to the drying of the foam at the exit of the cylinder. To reuse a foam container, you should listen to simple tips professionals.

• After a single use, an adapter or household bottle with a tube must be placed on the bottom and left in this position. You can place a container under the tube to collect the remaining foam. When complete hardening occurs, the tube is disconnected from the cylinder and the dried foam is removed using a long wire. The remaining polymer can then be reused.
• When using a gun, it is better to use a special flush, which is supplied in similar cylinders with a mount for the gun. To do this, simply rearrange the gun and press the trigger to wash under pressure.

TOP 10 best polyurethane foams

10 DEXX

Best price
A country: Germany (produced in Russia)
Average price: 140 rub.
Rating (2019): 4.2

DEXX universal polyurethane foam is perfect for working with any building material when performing home repairs and even professional construction. The possibility of use in the temperature range from -10 °C to 35 °C means that it can be used for its intended purpose all year round. Once completely cured, this product is non-flammable and non-toxic.

Work with DEXX is carried out using a special gun, the amount of filler formed reaches 30 liters. The density and structure of this professional polyurethane foam provides high-quality adhesion to the surface and hermetic filling of voids. This material also provides excellent protection against moisture and noise, which is important when installing windows or external doors. Buyers give mostly positive reviews about this filler, noting its good performance characteristics. No one considered even a small yield of polyurethane foam to be a disadvantage due to the most affordable price on the market.

9 Profile

The best choice for winter
Country: China
Average price: 251 rub.
Rating (2019): 4.2

Professional polyurethane foam Profil will be the best choice if it is necessary to carry out construction and installation work in winter, since it retains its specifications at temperatures down to -10 °C. The pistol system allows you to use this filler more rationally due to the precise dosage of the required volume.

Profil polyurethane foam has excellent filling, sound insulation and heat-saving properties. It is used for installing window and door blocks, filling joints and seams. Users note in their reviews the reliability and durability of this filler, the large volume of foam produced and the possibility of use at any time of the year. All these characteristics are greatly enhanced by the availability of an affordable price.

8 PROFFLEX PRO GOLD

Best product yield
Country Russia
Average price: 296 rub.
Rating (2019): 4.3

One-component polyurethane foam PROFFLEX PRO GOLD has the highest performance, making it popular among professional builders. The manufacturer guarantees the output of 65 liters of high-quality polyurethane filler. Installation work on building structures, windows and doors can be carried out in a temperature range from 5 °C to 35 °C, which guarantees correct hardening.

The products of this manufacturer are characterized by an accelerated drying process; complete hardening occurs within two hours. Professional polyurethane foam PROFFLEX PRO GOLD is an environmentally friendly product and fully complies with all quality standards, which is confirmed by certificates. In reviews, owners often note very economical consumption and optimal density, which guarantees the stability of the material before it hardens.

7 IRFIX B1

There is no secondary expansion. Fire resistant
Country Russia
Average price: 320 rub.
Rating (2019): 4.5

When performing installation and sealing work in places with increased fire safety requirements, the best choice will be professional fire-resistant foam IRFIX B1. It is perfect for laying cables, installing a chimney or fire doors. Polyurethane foam does not emit toxic substances and is absolutely safe for environment, thanks to which it can be safely used in residential premises.

Ease of use is ensured by a special applicator. The clever composition of this mixture with a low degree of re-expansion allows you to accurately dose the amount of material during the application process, while avoiding accidental overuse, which, in addition, will add work in the form of trimming excess. IRFIX B1 polyurethane foam has very high adhesion to almost all building materials, which significantly expands the range of its applications.

6 Moment Installation

High adhesion
Country Russia
Average price: 339 rub.
Rating (2019): 4.5

At the best price you can purchase Moment Montazh polyurethane foam in different regions of the country. You can buy a can of this insulating substance at any provincial store. It is available for use with or without a pistol. The most commonly available foam is all-season foam, which is suitable for jobs such as installing windows and doors, filling voids, and sealing seams. A distinctive feature of the material is its density and uniformity. The foam has good adhesion to various building materials. After complete drying, an insulation is formed that is not toxic or harmful to the human body.

The advantages of domestic foam Moment Installation include affordable price and good quality. Sometimes there are fakes that have an unpleasant odor and yellow color. Such foam can squeeze out door frames or window sills when hardened.

5 TechnoNIKOL 65 Constant

Low shrinkage rate
Country Russia
Average price: 357 rub.
Rating (2019): 4.6

The domestic foam TechnoNIKOL 65 Constant has the best universal qualities. It is a polyurethane material that has an increased yield from the cylinder. The product has moderate expansion and increases in volume after filling the voids. The presence of a special formula allows you to maintain volume during the drying process. After hardening, no shrinkage or secondary expansion is observed. Polyurethane foam clings well to the most popular building materials. The exceptions are polyethylene, silicone and fluoroplastic. The product can be used for fixing doors and windows, installing wall panels, roof insulation and plumbing fixtures.

In reviews, consumers speak flatteringly about the availability of TechnoNIKOL 65 Constant foam, predictability, and wide scope of application. The main disadvantage of the product is its absence in stores in small towns.

4 Makroflex Standard

The most popular polyurethane foam in Russia
Country: Estonia
Average price: 280 rub.
Rating (2019): 4.6

The most popular polyurethane foam among homeowners and professional builders is Makroflex Standart. This brand is so popular in our country that you can find the products in the most remote parts of Russia. Foam is intended for sealing cracks and voids, although it is often used as thermal insulation material. Spray cans often flash when installing windows and doors, eliminating cracks in old houses, garages, barns, etc. The strengths of the foam include good adhesion to a wide variety of building materials. Moreover, it has a homogeneous structure and does not suffer from secondary expansion.

Thanks to the promotion trademark Makroflex Standard polyurethane foam is in demand in our country. Affordable price goes well with technical properties. But reverse side became popular big number fakes In addition, reviews note shrinkage of the material after drying.

3 KRAFTOOL KRAFTFLEX PREMIUM

High fire resistance
A country: Germany (manufactured in Switzerland)
Average price: 345 rub.
Rating (2019): 4.8

High-quality polyurethane foam KRAFTOOL KRAFTFLEX PREMIUM is made on the basis of polyurethane with the addition of various additives that significantly improve the technical characteristics of the product. This foam is professional and is used with a mounting gun. It is perfect for all-season use for both interior and exterior work. Since this polyurethane foam filler has increased fire resistance, it can be safely used when installing fire doors and windows, as well as for filling any voids and carrying out sealing work.

KRAFTOOL KRAFTFLEX PREMIUM foam is distinguished by high sound and thermal insulation properties. Complete hardening of the material occurs within 12 hours. Its consumption is very economical - with a cylinder volume of 750 ml, the output is up to 45 liters of solid filler. You can store an incompletely used cylinder of polyurethane foam for quite a long time and in any position thanks to the patented Super Valve (SVS) system.

2 Tytan O2

Low temperature resistance
Country: Poland
Average price: 435 rub.
Rating (2019): 4.8

Tytan O2 winter foam is very popular and respected among domestic builders. It is affordable and has all the necessary qualities. The product is especially distinguished by its adhesion to building materials even in winter conditions. When hardened, the volume is well preserved and shrinkage does not form. And the structure of the polyurethane foam is dense and fine-celled. It is Tytan O2 that professionals choose when they have to install windows and doors in new buildings in frosty weather. The advantages of the insulator include non-toxicity and harmlessness to the human body. This modification also works great when used indoors.

The winter version of Tytan O2 polyurethane foam has many positive feedback. Professional builders rave about its low-temperature performance properties. The weak point of the product is its fragility outside buildings, fear of ultraviolet radiation.

1 Soudal Soudafoam

Best Fire Retardant Foam
Country: Belgium
Average price: 409 rub.
Rating (2019): 4.9

In the assortment of the Belgian company Soudal you can find different types of polyurethane foam. The fire-resistant modification, which is intended for sealing chimneys, stoves, plumbing pipes, etc., has excellent quality. Under certain conditions, the hardened insulator can withstand a fire test for 360 minutes. Foam is also used to improve fire safety, for example, when sealing roofs, installing insulating materials, and restoring the thermal envelope in air conditioning systems. Soudal is famous for its slight secondary expansion, dense and finely porous structure. Has good adhesion.

Professional builders in their reviews highlight such advantages of Soudal polyurethane foam as high quality, wide area application, no shrinkage. Foam does not tolerate exposure to sunlight, so protection of the seam from UV rays is required.