≡× MENU

• Interior
• Window
• Walls
• Projects
• The buildings

How to cover the walls on the veranda. What is the best way to sheathe a veranda? Insulation of the ceiling surface

A country house differs from a city apartment in that at any time you can enjoy relaxation in the fresh air without leaving your home. A veranda is an open space with large windows or without them, which is adjacent to residential premises. You can put a convenient one garden furniture To enjoy a cup of aromatic tea in the evenings, set up a small grill around which to gather the whole family and neighbors for barbecue. There are closed verandas allowing you to arrange a real summer kitchen either the dining room, enjoy the wonderful view of a warm summer night, or fairytale landscape in winter. But in order for the veranda to become truly cozy and comfortable, it is necessary to properly finish it. Wall cladding plays an important role; it sets the overall tone for the entire interior and creates the mood.

For interior lining you can use the most various materials, but we must remember that the microclimate of this room is different from the rest living rooms. Therefore, the cladding material must be practical, attractive, and resistant to changes in temperature and humidity. Often for finishing interior walls They use MDV and PVC panels, natural wooden lining. They allow you to finish in almost any style. At the same time, the time spent on work and financial resources are much lower than when using other options.

MDF for veranda

You can use MDF to cover the veranda. These are blocks in the form of wide boards, which are 2.6-3 m long and 15-30 cm wide. Today, a fairly large range of panel colors is offered, which makes it possible to decorate the room in almost any style. In addition, the surface of the panels can imitate the surface of natural wood.

Of the advantages that differ MDF sheathing, it should be noted:

• visual appeal, variety of color shades;
• practicality, such panels can be easily washed, almost no dirt accumulates on their surface, and dust can be easily removed with a regular damp cloth;
• extremely simple installation of slatted sheathing;
• acceptable cost.

Installation of such panels is easy; just attach the slats for the frame to the surface. The thickness of such wooden slats is only 2 cm, width - 4 cm.

The slats are fastened with nails; they perfectly eliminate small unevenness in the walls, eliminating the need for labor-intensive and expensive leveling.

When working, you must use a special plumb line or a building level to ensure that the wall cladding is smooth and neat.

The panels themselves have grooves, with the help of which the fastening is strong and reliable. Before nailing one panel next to another, you should insert it all the way into the groove. If necessary, the panels are very easy to cut. For cutting, you can use a regular jigsaw or saw. The joints at the ceiling and floor can be covered with a special skirting board of the selected color.

A wide variety of material colors allows you to use the most unexpected combinations for finishing. A veranda wall covered with MDF panels of two or even three colors turns out to be much more advantageous and interesting than finishing with expensive plaster. Using this method, you can zone a large veranda by arranging a separate corner for relaxation, dining area, a place to work outdoors.

Return to contents

PVC panels for finishing

To sheathe the inside of the veranda, many experts recommend inexpensive plastic panels that are perfectly adapted to changes in temperature and humidity. They are attractive, practical, easy to clean, and installation of such panels is accessible to everyone. Their cost is lower than similar finishing options. If desired, the interior can be easily updated without spending a lot of money.

On the market these days you can buy PVC panels of various types. They can imitate natural stone, wood, textiles and even metal. With such panels you can create an interior in any chosen style, spending only a few days on it. The panels can be mounted not only on walls, but also on ceilings, choosing the desired shade and pattern.

Used for installation wooden frame, that is, thin slats 30x20 mm or 30x10 mm. If there are no slats, then a special one will do. metallic profile for drywall. If the walls of the veranda face the street, then the tree is the best option, since metal creates cold bridges. The PVC panels themselves are attached to the sheathing with nails, but we must remember to create a gap. It is placed near the joints of the walls and ceiling, 2-3 cm is enough.

There are also disadvantages to such internal lining. Such panels can easily be broken by accidentally hitting them with a chair. Therefore, it is recommended to attach a decorative wooden board to the wall at the level of the backs of the chairs, which can become a real highlight of the interior. On the surface of such a board you can lay out mosaics and make beautiful carvings.

Return to contents

Wooden lining for a stylish interior

When asked how to cover the inside of a veranda, natural wood lining immediately comes to mind. This is a special cladding board, which is up to 22 mm thick, and is attached to the surface using special grooves. This material can be used to decorate not only the walls, but also the ceiling, and the variety of color options allows you to create a unique, attractive interior. Among the advantages of lining it should be noted:

• strength, resistance to mechanical loads and shocks;
• practicality;
• attractive appearance;
• the delightful smell of natural wood;
• environmental friendliness and safety;
• reasonable cost;
• simple and very quick installation;
• variety of board shades;
• long term service - up to 20 years.

Today you can purchase a wide variety of linings, which are excellent for interior decoration. This is a spliced ​​and solid board. In the first case, the lining is made from separate pieces of wood, which are connected to each other in a special way. The material turns out to be attractive and durable, but it is only suitable for finishing the interior living spaces of the house, and not for the veranda. With high humidity (and on the veranda this is not uncommon, especially in the mornings when dew falls in the garden), cracks appear on the surface of the material, and this not only spoils the appearance of the wall decoration, but also negatively affects the strength.

A solid board consists of a single, processed piece of wood; it can be chosen for finishing the interior walls of the veranda. We must remember that the lining is additionally divided into 4 classes. But the “extra” class, which has the highest cost, is a jointed lining, that is, it should not be taken for a veranda. Classes A, B, C - solid materials that may have minor knots on the surface. The material of such classes is already treated with putty, which greatly simplifies the finishing work. When purchasing material, you must not only specify the type of lining, but also open the pack, since quite often you come across defective planks.

Installation of the material is extremely simple, it is carried out on a pre-fixed lathing to the wall, but the planks themselves can be attached in several ways:

• using galvanized nails that are driven into the surface of the board;
• using wood screws, the heads of which are closed with dowels. The result is a hidden fastening;
• when using a conventional construction stapler;
• using metal clamps.

After installation, the internal lining of the veranda is covered with colorless varnish or a special glaze with ultraviolet protection. This allows you to extend the service life of the material.

For the interior cladding of a room such as a veranda, you can use a variety of building materials, but with the condition that they can be used under changing humidity and temperature. Special solid lining, PVC and MDF panels intended for such work are excellent for this purpose. All of them are attractive and interesting appearance, simple installation and low cost.

A veranda is an external extension to a house. It can be open or closed. With the help of a veranda, your home can become more attractive and spacious. The extension can be either summer, that is, open, or winter, insulated. But you need to know what to cover it with so that you can use it even in the winter cold.

Extension rules

If the veranda was not planned initially and was completed later, you need to know the rules for its extension so that you do not get unexpected surprises in subsequent operation. The main rule is right choice building materials. It could be a metal frame. It can be covered with durable plywood or plastic. This appearance of the veranda does not spoil the overall picture of the house and has a completely aesthetic appearance. It is also impossible not to say that the addition of a veranda needs to be legalized. To do this, there are various design bureaus; you need to create not only a project, but also obtain a building permit. All this is done to ensure that no problems arise when selling the house.

Return to contents

Exterior decoration of the veranda

If the finishing of the veranda inside is finished, you can start finishing the outside. The most in a simple way Covering the veranda with clapboard will be considered. The lining can be wooden. But in the presence of all kinds of impregnations and antiseptics for wood and when exposed to environment such cladding very quickly loses its decorative purpose. Treatment will have to be carried out every year, and this is not always suitable.

If you still choose wooden lining for covering the veranda, you should remember that it is attached only with the tenon facing up. Fixation should occur in two rows: from the side of the tenon and from the side of the groove itself.

Finishing using lining has a number of advantages. Strength, wear resistance, very convenient installation, good sound insulation. This is the most advantageous type of finishing. And most importantly, if several sections need to be replaced, this can be done without destroying the entire skin. And it is very possible to achieve an absolutely flat wall surface. It must be remembered that lining is used for external and internal cladding. Therefore, it is produced in different thicknesses. For outer skin use a section of 18x105. Such clapboard can be used to cover not only the veranda, but also the house itself, a bathhouse, a sauna, and a gazebo. Using this lining you can create an interesting surface with relief. The lining will give the veranda a special flavor, and the smell coniferous tree will create comfort and a pleasant atmosphere.

Return to contents

Siding finishing

IN Lately Finishing the veranda with siding has become very popular. Even if the house is painted, it is possible to choose the desired siding color so that the veranda does not differ from the main ensemble. Vinyl siding is often used. Its price is quite reasonable and it is very easy to install. To cover the veranda, you should use horizontal siding that has locking connections. It is necessary to consider in detail the technological process of installing siding.

Return to contents

External veranda cladding process technology

External finishing work on the exterior of the veranda begins with the installation of the sheathing. Here you can use an unedged board that is thirty millimeters thick. You can use timber. A board or beam is attached vertically over the entire surface of the wall, the distance should be forty centimeters. Additionally, it is necessary to install bars around windows and doors, as well as in the corners and along the outer and inner lower edges of the trim being produced.

The next step is to install the starting profile. It is installed at the bottom. It must be secured to the sheathing itself with self-tapping screws. The position strictly horizontally should be checked with a special level.

Now you can install corner profiles at external and internal corners, and then around windows and doors. Major Warning: Bottom Edge corner profile should be lowered below the starting beam or board by five millimeters. Now you can begin cutting and installing the panels themselves.

Return to contents

Siding cutting and installation

Cutting siding made from vinyl is very easy. Tools needed for this:

1. Metal scissors.
2. Hacksaw.
3. Jigsaw.

It is considered very important that vinyl expands when heated, so each panel must be made five millimeters shorter than the wall. Now you need to install the siding. This needs to be done in stages.

1. You should bend the panel slightly in the center and insert its edge into the groove of the corner profiles.
2. Having aligned the panel, the bottom edge needs to be inserted into the starting strip.
3. The edges are fixed with self-tapping screws through ready-made holes, but the self-tapping screw should not be pressed tightly against the sheathing. The hole should be oval. The distance between the sheathing and the screw head is one and a half millimeters.
4. The action is repeated, the next siding panel is inserted into the profiles at the corners, snapped into the groove of the installed one and fastened like the previous one.
5. Before installing the last level strip, you should mount the finishing profile; to do this, cut the required width of the strip of siding, snap it into the strip, and simply insert the free lower edge into the finishing profile.

Exterior decoration is modern form design. Its advantage is that the entire finish consists of slats, which are made of different materials. They are fixed using various elements. The fastening itself occurs using building material.

The exterior decoration of the veranda, like the decoration of the entire house, requires preparation and experience. When installing veranda cladding, you need to create ventilation systems. They are usually mounted under a rigid frame, which consists of a metal profile. This finish is called modular. The frame is easy and quick to install. By doing exterior finishing verandas with siding or clapboard need to be covered with the same material on the pediment of the dacha itself. Then the picture will be complete.

We should talk about what other materials can be used to cover and insulate the veranda. There is a finishing material called planken or finishing quarter. It is similar to lining, but it does not have joining grooves. The plank must be installed end-to-end, but with gaps. This way the facade will be well ventilated. Planken is easy to install, it is economical and practical. When shrinking the veranda, it does not require intervention. Planken, like the finishing quarter, is intended to create a façade with ventilation.

To cover the veranda, you can choose a block house, this is a type of lining. The block house is made from natural wood; it has a cylindrical shape on the front side. There are tenon grooves on the ribs, like ordinary lining. A block house is made from coniferous species, larches. Its wear resistance and durability are affected by thorough drying. It is economical and practical. To ensure that it does not crack during installation, it must be treated with special compounds. To cover wooden verandas, you can use imitation timber. Unlike real timber, its front surface is flat.

Sheathing the outside of the veranda is half the battle. In order to make it cozy even in the cold season, it should be insulated before covering it. You can choose any insulation, it can be polystyrene foam or mineral wool. But here you have to choose based on your budget. For example, polystyrene foam is considered affordable, but it is not fire resistant and emits when heated poisonous gases. Mineral wool is afraid of moisture, it should only be used in conjunction with a vapor barrier.

It is recommended to use penofol as insulation for the external walls of the veranda. This modern material, which consists of foamed polyethylene, it is covered with aluminum foil. It can be used as a heat reflector. Can be used alone or with other types of materials.

Now you need to figure out which side is better for insulation. You can insulate both outside and inside the veranda. But experts recommend doing insulation from the outside; it reduces the space from the inside.

It should also be said about such a finishing material as facade brick. Covering a veranda with façade bricks means building another veranda around the veranda. Although this finishing will make the veranda more massive, it will be much warmer. You should consult with experts whether the foundation can withstand such a load. This must be done without fail.

The veranda can also be sheathed with corrugated sheets, having previously been insulated. Corrugated sheeting is a durable and reliable material. Covering with such material has a number of advantages. The first advantage is its low weight, which makes it possible to carry out the sheathing work yourself. Other advantages include: ease of installation, good thermal properties, strength, corrosion resistance, attractive appearance, variety of colors, and most importantly, affordable cost. This cladding protects against environmental influences, is very easy to maintain, and provides excellent waterproofing.

In addition, covering the veranda occurs very quickly and requires almost no physical effort during operation. The corrugated sheeting is durable and resistant to gusts of wind and is perfect for outdoor work. The cladding should be carried out on a pre-made frame. Corrugated sheeting should be applied to an insulated wall. It can also be attached to an existing old frame. You should start fastening the sheets from the corner and continue in one direction. Installation is carried out using special screws; these screws have a rubber gasket.

The heads of the fixed screws can be painted to match the profiled sheet itself. You need to screw in the screws parallel to the veranda slab. At the corners at the joints it is necessary to strengthen special strips, and the outer corners should be covered with special profiles, which can also be made of other materials. Covering the outside of the veranda with corrugated sheets does not take much time, the design itself is attractive, and the service life increases.

Of course, the choice of material for covering the outside of the veranda depends on the taste of the person and his economic capabilities. The choice of materials is very diverse.

The veranda should be as comfortable and aesthetically pleasing as the entire building. This may be the main entrance, giving the first impression of the interior, or an extension intended for recreation or economic needs. One way or another, one of its main purposes is to serve as decoration, without which the house would not look so elegant. It can be designed in the same style as the main building, or differ from it, creating an interesting composition with it and successfully complementing the facade. The walls and ceiling will require a durable and fireproof finish, so we’ll tell you what you can use to cover them. unheated veranda outside and inside.

How to cover an unheated veranda inside and outside

Material requirements

One of the main tasks is to create a coating that does not allow heat to pass through and protects from drafts. The walls must breathe, otherwise during the cold season it will be stuffy and uncomfortable inside, especially when the radiator is on. A vent valve may solve the problem. Such devices are usually used in city apartments where impenetrable plastic double-glazed windows are installed.

If the house is intended to be lived in all year round, the covering will be required to have good thermal insulation properties. It is advisable to put a layer of thermal insulation under the finishing, covering it with a film that does not allow moisture to pass through. Without such protective measures, water will penetrate into the voids and begin to destroy the material, expanding when it freezes. There will be a damp smell in the room, and mold may appear in the corners.

If the building is garden plot used only in summer, the outer finishing layer must still have good waterproofing properties and reliably protect brick, concrete or wood from getting wet.

One of the most important requirements is fire safety. For a log house or structure made of timber, relaxation can be allowed, but it is still worth making a choice in favor of a non-combustible coating. In the event of a fire, it will retard the flames and may save the lives of people in the building.

Important qualities are environmental friendliness and non-toxicity. The coating should not cause allergies. If it has a strong chemical smell, it should not be used under any circumstances. Even in an open room it will be impossible to get rid of this “aroma”. When burned, the material will likely release toxic gas. Unscrupulous manufacturers try to sell their goods as quickly as possible. It is usually sold in markets where no one monitors quality, and is very cheap, so it is better to purchase it in construction stores, where the quality of the product is beyond doubt. Price serves as one of the indicators of quality.

The cladding is required to maintain its properties despite frost, rain and exposure to ultraviolet radiation. If you plan to paint it, it is better to choose the most durable compounds.

How to properly finish the inside of the veranda?

Veranda or terrace in a private house - perfect place for the recreation of its inhabitants.

To make it comfortable and create an atmosphere of home comfort and peace, it interior design needs to be given the appropriate look.

The most commonly used material for constructing a veranda is wood. And before proceeding with the interior decoration of the veranda, it is necessary to coat the wood parts with an antiseptic solution.

It must be taken into account that this is a non-residential and unheated room, therefore special requirements are imposed on the materials used for interior decoration. To interior decoration verandas had a good appearance for a long period of time and did not require frequent repairs, it is required to use high-quality, moisture resistant materials. If you have basic skills in performing repair work, finishing the veranda can be done with your own hands.

This work must begin with drawing up an estimate. Plan the order of work, select and purchase the necessary materials in advance so that the interior finishing can be done quickly and efficiently. List of works for finishing the veranda:

1. Selection of materials.
2. Ceiling finishing.
3. Covering the walls of the veranda.
4. Floor covering.

What materials are used to finish the veranda?

If you want to receive beautiful finish verandas, the choice of quality materials is critical. The peculiarity of the selection of materials is that in most cases an unglazed veranda attached to a house is more like an open terrace, which is seriously exposed to the external environment. Therefore, the material must not only correspond to a certain design, but also be resistant to high humidity, temperature changes and sunlight.

Diagram of the structure of the timber imitation panel.

The most common material for such work is wood lining. This material can be used to cover both the walls and the ceiling of the veranda. It's environmentally friendly natural material, has a beautiful appearance and a pleasant smell of wood.

Drywall is waterproof. Ecologically pure, non-flammable material, easy to install, easy to process, allows for a wide variety of finishing.

MDF is a material that imitates wood. Durable material, the surface of which is made with wood imitation. However, when it gets wet, it swells and loses its quality. Can be used for finishing closed verandas.

PVC panels. Inexpensive, moisture-resistant material, has a rich texture, a wide variety of colors and shades. Easy to install, easy to clean. Durable and non-flammable material.

Siding is a practical, inexpensive material. Available various colors, with imitation wood, House block, lining. Does not rot, is resistant to fire, temperature changes, has a long service life, and is easy to maintain.

Ceiling finishing procedure

Diagram of a device for insulating a veranda wall.

The process of making a ceiling begins with its preparation. First of all, it is necessary to treat with an antiseptic and fire retardants. wooden structures veranda ceiling. Then install the frame under the sheathing. The frame is made of bars measuring approximately 30x50 mm. Before installation, the bars are impregnated with an antiseptic.

After it has dried, using self-tapping screws, the bars are attached to the roof rafters in increments of about 50 cm, maintaining horizontality, which is maintained using a level.

If the veranda is closed, the ceiling is insulated, which allows you to use the veranda until late autumn. To insulate the ceiling, first a waterproofing film is installed and attached to the rafters, then insulation is installed between the rafters. Mineral wool or expanded polystyrene is used as insulation. After completing this work, the ceiling is sheathed with clapboard or other material.

The lining is laid perpendicular to the frame slats and nailed into the end with thin galvanized nails. After installation, the surface of the lining is sanded and varnished.

Scheme of a wooden veranda.

When covering with PVC panels in the corner of the room, a starting profile, it helps to assemble the panels together. Then a panel sheet is inserted into the profile groove. It is attached with self-tapping screws or special holders. The next panel is placed in the groove, secured, and so on. During installation, a compensation gap of about 2 cm is provided, which is then covered with a plinth.

Similarly, the veranda ceiling is sheathed with siding and MDF.

To install drywall, instead of wooden bars as lathing, it is better to use a special metal profile. Elements are installed on the profile, to which sheets of plasterboard are attached using self-tapping screws.

After this, the surface of the veranda ceiling is puttied, cleaned, and it is ready for finishing. You can glue it as a decoration vinyl wallpaper, paint or cover with artistic plaster.

Veranda wall cladding

A frame made of wooden blocks is installed on the walls, the verticality of which is checked with a level. If necessary, the walls are insulated. WITH outside A waterproofing film is installed on the wall, which is secured with slats, then insulation is installed and the sheathing is attached. Wooden elements are pre-treated with an antiseptic. Then lining or other finishing material is attached to the frame. And their finishing is carried out.

Veranda floor covering

Scheme of the installation of insulation of the veranda with false ceilings.

One of the finishing elements of the veranda that gives it a decorative, finished look is the veranda floor covering. Today the flooring market represents the widest range of materials.

Wood remains one of the popular coverings. However, such coating requires careful maintenance and is expensive.

When finishing a veranda with your own hands, laminate is widely used. It has a long service life, is resistant to abrasion, is very easy to install, and does not require additional maintenance. However, it is afraid of moisture, and can only be used as a floor covering on a closed veranda.

For an open veranda, the best option may be porcelain stoneware or PVC tiles.

Porcelain tiles - modern look flooring: strong, durable, not afraid of temperature changes, moisture, sun rays.

PVC tiles- a new type of flooring. Made from quartz sand and vinyl with the addition of polyurethane. This is a very durable, wear-resistant material, not afraid of moisture, and resistant to ultraviolet radiation.

Self-leveling floors are manufactured using self-leveling mixtures. If the manufacturing technology is followed, the result is a floor with a perfectly flat surface. It can be applied to any surface. It is very durable, resistant to moisture, alkali and acid solutions. Does not require any additional care.

Scheme of the terrace arrangement.

Linoleum, a traditional flooring material. Very easy to install. It is laid on a flat surface to which it is glued with bitumen mastic. It is not afraid of moisture, wear-resistant, but is sensitive to sudden temperature changes, so it is better to use for closed veranda.

The veranda overlooking the garden is a great place to relax and socialize. The colorfully designed interior will create a feeling of comfort and coziness. A properly done DIY veranda decoration will be a wonderful designer decoration for any home.

How to sheathe the inside of a veranda inexpensively

Veranda owners may often ask themselves the question of decorating this comfortable space. There are two types of finishing, which are determined by the scope of work. The first is covering the veranda from the outside, the second is working from the inside. On our website you could find information about materials for external cladding. And this article will be devoted to internal work. At the same time, you will consider economical cladding options that are decent and have been used for many years. Then your veranda will be beautiful and protected.

After all, this room is adjacent to the living room and can be used for different purposes. We can say that for owners of private houses this is additional space. Let's find out what to cover the inside of the veranda inexpensively and how to do it. Then you can make full use of the veranda area.

Features of the room

It is clear that the requirements for material for interior decoration are much lower when it comes to exterior decoration. But still, the veranda has some peculiarities, so the selection of products for covering must also be done wisely. The fact is that the veranda has its own special microclimate and can be an unheated room. Therefore, the finishing material must meet the following requirements:

1. Practicality.
2. Attractiveness.
3. Resistance to temperature changes.
4. Moisture resistant.
5. Resistance to mechanical damage.
6. Environmentally friendly, since we are talking about the premises inside.

There are quite a lot of materials that meet these requirements. However, not all of them are affordable in terms of price. Therefore, we recommend that you consider using MDF panels, wood paneling and PVC. They solve assigned tasks perfectly and cope with all negative factors. And their price is low. Let's look at each material in more detail.

MDF panels for the veranda

Often the veranda is covered with MDF panels. In some ways, the material resembles lining, as it is produced in wide boards. Their length can reach from 2.6 to 3 m, and their width can range from 15 to 30 cm. In the store you can see a fairly large color scheme products, which allows you not to use a standard set, but to expand the range. Thanks to this, you can harmoniously match the style of the entire house, or make a veranda of any color. Moreover, MDF boards can be made to suit natural wood, imitating it.

Here are the advantages of this material:

1. Quite attractive and comes in a wide range of tones.
2. Is practical material for covering the veranda, as it is easy to wash. The surface will practically not collect dirt, and dust can be easily removed with a damp cloth. This is important for the veranda, because people often take off their shoes there.
3. Installation of MDF panels is quite simple, so even a non-professional can cope with this task.
4. Low cost, which allows you to buy this material for the veranda, despite a limited budget.

As you can see, the cladding looks pretty good. Therefore, it is a worthy analogue of expensive materials for covering a veranda. And the installation process is completely simple. You just need to make a frame on the walls from slats, the thickness of which is 2 cm and the width is 4 cm. Next, the MDF boards themselves are fastened to the slats with nails. The process is very similar to covering a veranda with clapboard.

In order for the veranda trim to be neat and even, it is recommended to use a plumb line or level when working to control everything. The main thing is to set the starting level correctly, and then things will go like clockwork. The panels have grooves, thanks to which the fixation will be reliable and durable. If necessary, the panel can be easily adjusted to size. They can be cut with a saw or jigsaw. After completing the covering of the veranda, you can hide the joints near the ceiling and floor, covering them with skirting boards of identical color.

Now your veranda is ready for use. You can relax in it, make it a dining area, a workplace or your own greenhouse.

PVC panels for finishing the veranda

Finishing facilities plastic panels also quite popular. This option is loved by many specialists and is used everywhere. Plastic panels are the same lining, but made of plastic. Due to this material, finishing has many advantages:

1. Long service life.
2. Excellent resistance to moisture.
3. Easy to care for. The coating can be washed with a cloth.
4. Resistance to ultraviolet rays.
5. Light weight, which allows not to burden the structure.
6. Quite attractive and at the same time practical.
7. Installation is very simple.
8. The price is reasonable.
9. The range of products is large, so the veranda can turn into anything.

It will not take much time to treat a large veranda. The work is done quickly and effortlessly. A veranda finished with this material can be used for various purposes. In addition, you can cover both the ceiling and walls of the veranda with PVC panels.

If you try, then all the cladding work can be completed in one day. Installation is also carried out on a frame made of slats, 30×20 or 30×10 mm thick. PVC panels are fastened with nails. The disadvantage of the material is its fragility. By hitting the trim, you can make a dent in it.

Wooden lining for the veranda

And finally, we have come to one of the most popular materials, which has earned an honorable place among homeowners. The lining is made from natural wood, so it is 100% safe. The material is ideal for finishing interior spaces both walls and ceilings. And the appearance of the cladding is simply magnificent.

Main advantages of the material:

1. The lining is durable and resistant to impacts and all kinds of loads.
2. Is practical.
3. Has an attractive appearance.
4. It does not release any toxins, but, on the contrary, enriches the room with the pleasant smell of natural wood.
5. The cost is not exorbitant, but quite affordable. In this case, the material is divided into classes, which allows you to choose your category.
6. Installation is quite easy.
7. You can choose a board of different shades.
8. Durability, the material with proper care and protection will last 20 years.

As for the classes mentioned above, the lining is divided into 4 groups:

The quality of the material in this list is listed in ascending order. The cheapest lining option for finishing a veranda is class “C”. The product contains the largest number of knots and minor defects. To finish the veranda, it is recommended to use class “B” or “A”, since “Extra” is very expensive.

How to cover the inside of the veranda with clapboard? The technology should be familiar to you:

1. Vertical slats (lathing) are placed on the wall.
2. After which the first plank is fixed, starting from the corner.
3. This is the most critical stage, since the evenness of the entire finish will depend on it. When working, use a level.
4. Further boards are fixed to each other through grooves.

The method of fixing the bar may be different. They are nailed with galvanized nails, wood screws, a regular stapler or clamps. After installation is complete, it is recommended to protect the lining with varnish or other impregnations. This will extend the life of the covering on the veranda.

Let's sum it up

As you can see, you don’t need to spend incredible amounts of money on covering a veranda, buying expensive material and hiring workers who will do everything for you. hard work. Thanks to these easy-to-install materials, which are inexpensive, you can sheathe your veranda with high quality, creating comfort, beauty and protecting the walls from various factors.

External and internal decoration of the veranda

A modern country house is designed to provide best conditions living in it. Currently, all conditions have been created for this - an abundance of design solutions in house construction, a variety of traditional and new proven materials.

One of the elements of private buildings is currently a terrace - in whole or in part open area equipped with a roof. It allows you to fully feel like a part of nature, practically without leaving your home. About what materials and in compliance with what requirements the terrace can be finished, and we'll talk further.

Classic terrace design

Structurally, an extension to a house, called a terrace or veranda, is a podium raised above the ground on one of the types of foundations, and a roof made of some material, supported by several support beams. According to their design, such structures are divided into:

Open veranda

This view is good when located on the leeward sunny side. Due to the absence of fences, there are practically no boundaries between the veranda and the space surrounding it. It is better if the floor height of such a structure is low. This is especially true when children live in a country house.

This option requires minimum costs for its construction. And finishing the veranda will not require large expenses. But maximum demands must be made on its quality, since the structural elements will be under constant influence of excessive moisture, frost, winds, and temperature changes.

Partially closed option

Such a terrace retains its airiness and openness, but ensures high safety for household members and their guests. The main difference from the previous option is the presence of fences made of timber, in the form of a frame structure made of lumber, as well as from blocks or bricks, followed by finishing of the veranda walls outside and inside.

Photo: 3D project country house with veranda

Due to the lack of complete isolation from the atmosphere, the operation of structures of the first and second types is possible only in warm time of the year. It is impossible to properly insulate them due to the design features, and it is quite difficult to completely protect visitors to such a terrace from the wind and raindrops flying inside.

Closed terraces

This type is most suitable for year-round use as additional room. Even in the winter cold, closed from the wind and frost, you can enjoy hot tea while admiring the beauty of nature. In this case, it is better to combine the interior decoration of the veranda with insulation of all its walls. This will minimize heating costs for the house as a whole.

Veranda finishing options

The manufacturing process of the described structures is not complicated and is quite accessible with your own hands, as is finishing the veranda inside or outside. Since the topic of the article requires a more detailed acquaintance with the second part of the works, we will consider them, focusing on possible options, their features, advantages and disadvantages.

Currently, the interior of the veranda is covered using the following materials:

1. wooden lining;
2. plastic panels;
3. MDF panels;
4. cement plaster and cement-based artificial stone.

Decorating the veranda with wood

The classic option is the use of natural wood materials for finishing the walls not only of the interior of the house, but also of extensions. The lining is distinguished by its good appearance, ease of installation and low requirements for the quality of base preparation.

Its installation is carried out on a lathing made of 40x40 mm bars using special fasteners - clamps, which grab the panels by the groove and securely fix them. Finishing parts can be placed vertically, horizontally or at an angle to the floor.

When finishing the exterior, you can sheathe the veranda only by installing the lining parallel to the soil with the ridges up to prevent the accumulation of water in the grooves.

Plastic finish

Also quite a common option. It is better to decorate a closed veranda with such panels. In this case, temperature changes are less sensitive to the material, which helps to increase its service life.

Unlike wood materials, plastic is practically not afraid of water. Modern retail chains offer many options for both color and texture design of plastic panels.

Installation of plastic trim is easier than wood trim. Thanks to the considerable width of the panels, the process is faster.

It is convenient to fasten the finishing parts to the sheathing using a construction stapler, driving the staples into a wide shelf along the edge of the products. Plastic panels do not require further finishing with paintwork, they can be easily washed with a damp cloth, and dust does not settle on them.

Interior finishing with MDF panels

Another common finishing material for interior work is MDF panels. Like the previous option, they are distinguished by a large working width, which allows for sheathing to be carried out quite quickly. For fastening to wooden sheathing, clamps are used, similar to those used when installing wooden lining.

Thanks to the large number of colors imitating natural wood, stone and even leather, such interior decoration of the veranda will have a very quality look. With all the advantages MDF has and significant drawback– very low moisture resistance. In this regard, it is better not to use them for finishing open terraces. Otherwise, additional protection will be required in the form of varnishing all sides of the panels.

Decorating veranda walls with cement materials

In the case of using cement-containing building materials - blocks with one or another filling, or bricks - to make a terrace, it is better to finish the walls with mixtures or parts that are similar in composition.

Please note that gypsum-based plaster and gypsum artificial stone are not suitable for covering the walls of open verandas.

Home owners are often deterred by the high cost finishing materials from cement. At the same time, it is not difficult to produce the required quantity of original artificial stone independently in a home workshop. By adding aniline dye, you can get a unique interior in the room being finished.

Polycarbonate for finishing terraces

As already noted, the materials listed above used in finishing internal space verandas have certain disadvantages that limit their use. IN last years increasingly wider external walls and the roofs of the terraces are covered with polycarbonate - an artificial transparent material that allows you to create a closed space while maintaining visual contact with the surrounding nature.

There are two main types of this plastic:

1. Cell phone. It is characterized by minimal weight, high light transmittance, and durability, therefore it is often used for roofing terrace roofs.
2. Monolithic. Its properties are close to real quartz glass, but unlike it it does not have such high fragility. This determined its use in vertical frame structures - windows, doors, transparent walls.

Modern manufacturers are not limited to producing colorless sheets. To create a soft shadow, we recommend using green, blue, red, yellow cellular polycarbonate for the roof. You can combine several colors, giving the entire design brightness and uniqueness.

Covering veranda walls with cellular polycarbonate is quite easy to do yourself. To work you will need minimum set tools:

• cutting knife - any construction knife will do;
• screwdriver

The polycarbonate installation technology involves the following list of works.

Installation is carried out in the same way cellular polycarbonate on the roof of the terrace. If there is a ridge - the junction of two roof slopes, use a special ridge profile, sold in organizations that sell sheets.

If you have no cutting experience, cut sheets according to required sizes can also be performed by workers at construction bases.

As follows from our review, the amount of materials for covering terraces is sufficient to create a unique structure. Before finishing your veranda with any of them, carefully study all the operating features in a particular case.

The vast majority of country houses and country houses are built with a mandatory veranda, no matter whether heated or not. What is a dacha without a veranda, a full-fledged living space, and at the same time a place to store all kinds of utensils. After completing the construction of the building, sooner or later you will have to decide how and with what to cover the inside of the veranda so that it is inexpensive and beautiful.

Living in a barn-like room is uncomfortable, and spending extra funds not by hand.

Requirements for finishing material

Before looking for material and a way to sheathe the inside of the veranda, you need to look at the conditions of the room, and only then look suitable material inexpensive.

Let's focus on the main ones:

• Temperature and humidity indoors. It depends on which side of the house the veranda is located on, sunny or shady, whether it is possible to sheathe the inside walls with materials based on cellulose fibers, or whether you will have to buy plastic, inexpensively and reliably;
• The frequency of people living in the house and using the premises. For a house in which a constant temperature is not maintained, and people live with long breaks in time, the problem of how to line the walls inside turns into a question of dealing with water condensation;
• Age of the veranda and the entire building. There is no point in trying to sheathe the walls indoors until the shrinkage processes of the foundation and building frame have been completed.

In the simplest case, you can sheathe the walls from the inside cement bonded particle board, very inexpensive, practically not afraid of dampness, does not warp even with strong condensation. But from an aesthetic and practical point of view, most owners would like the cladding inside the veranda to, first of all, be comfortable and safe for health, and only then it would be inexpensive and practical. Therefore, from more than two dozen cladding options, we will leave only those most suitable for the listed requirements.

For your information! For a newly built wooden veranda, it is advisable to make temporary cladding using tongue-and-groove boards.

How to sheathe a veranda with wall shrinkage, inexpensively and efficiently

Instead of the traditional vertical boarding, you can sheathe the walls with horizontal padding on a cross batten. It will turn out inexpensive and practical. To prevent the finishing from being torn off the walls during shrinkage, the board is filled with a maximum gap at the tongue-and-groove joint and mandatory installation of insulation, for example, made of foamed polyethylene.

After three to four years, the decoration on the veranda can be inexpensively updated:

• Remove the board, insulation and sheathing;
• Treat the wood with antiseptic impregnation, stain and varnish;
• Lay the sheathing, insulation and sheathe the walls again, but with the correct gaps in the joints between the boards.

In this way, you can inexpensively cover any room in a wooden house, or a bathhouse made of timber. For brick and block buildings, which have significantly less shrinkage, the veranda can be immediately sheathed according to the finishing scheme.

Popular materials for covering verandas

The modern market offers enough big choice materials for decorative wall cladding, including verandas. The list of the most popular finishes usually includes:

• Lining, board, wooden slats;
• MDF or fiberboard, boards and panels;
• Plywood, OSB boards;
• Waterproof plasterboard sheets GKL;
• PVC panels.

All of the listed materials fit well into the interior of the walls of the room, do not swell with moisture and do not create a feeling of discomfort for the owners, therefore, in the question of how to sheathe the inside of the veranda inexpensively, price and personal preferences and desires remain the determining factors.

To sheathe a veranda indoors truly inexpensively, you will have to do a larger amount of work yourself, and spend the bulk of the costs on purchasing high-quality material.

But not all indoor conditions are the same. Often, before sheathing the veranda inside the photo, it makes sense to contact a specialist for advice and clarification.

Material for a cold veranda

It is quite difficult to choose what to cover the inside of an unheated veranda. There are not many finishing options that can be used inside a cold, unheated room. Most often, the list is limited to plastic panels, waterproof grades of OSB boards and coniferous lining.

The main problem that owners of unheated rooms have to face is condensation that regularly forms on the surface inside the cladding. Therefore, you should not try to cover the walls of a closed veranda with materials made from cellulose fibers, primarily fiberboard and MDF. Even when painted with enamels or varnished, they quickly swell, which leads to warping and breakage of fasteners.

PVC panels are considered the best option. They do not rot, do not absorb moisture, the choice of colors is simply huge, and all this wealth will be relatively inexpensive when compared, for example, with oak or cedar lining.

If desired, the inside of the veranda can be covered with plastic with an imitation pattern valuable species wood, natural stone or just a single color color that matches the interior of the room.

To finish with polyvinyl chloride, the walls of the veranda will first need to be sheathed with a supporting frame made of galvanized profile. Metal profile strips are nailed to the walls in increments of no more than 60 cm. The easiest way is to sheathe the veranda vertical stripes PVC, in this case the profile is nailed in horizontal rows.

The walls of the veranda facing the street, before being covered with panels, are insulated with isolon or foil polyethylene; this is inexpensive and effective. Domestic warm walls can be sheathed with mineral thermal insulation with a gasket inside the layer vapor barrier membrane. In this case, it will be necessary to organize additional ventilation of the room, since plastic, like glass, creates an increased level of humidity from the inside.

For dachas, the problem of condensation is especially relevant during the onset of cold weather. After the owners move out with the first frosts, a large amount of water vapor accumulates through the walls; they need to be removed by flowing ventilation before the low air temperature turns into frost on the walls inside the room.

The choice of polyvinyl chloride to sheathe the inside of the veranda of a house cannot be considered particularly successful. Plastic always remains a fire hazard; at low temperatures, an accidental push from a chair or a careless blow can lead to cracking of the material.

Therefore, if you can inexpensively buy lining made of oak or larch, it is better to sheathe the inside of the room with wood, which will last for several decades.

Decorating the veranda with wood

Wood has always been considered the best material for any finishing work inside the veranda. The easiest way is to cover the walls inside the room with clapboard, both in an expensive version and relatively inexpensively, approximately at the level of PVC panels.

Standard lining is divided into four quality classes:

• Extra is the most durable and beautiful material, without a single knot or disruption in the fiber pattern. Such wood is used for expensive finishing inside the living quarters of the house;
• C-class - the cheapest, designed to sheathe a shed or utility room. Despite the fact that in general the work is inexpensive, due to the extremely low quality, it is not recommended to use verandas for interior finishing;
• Classes A and B allow some defects in the form of knots or even cracks, but most of them are located at the end of the plank. It is with this clapboard that it is best to cover the veranda.

Most craftsmen do not trust the information about the class indicated by the manufacturer on the packaging; most often the material turns out to be of lower quality than stated when sold. Therefore, before covering the inside of the veranda with clapboard, do not be too lazy to open and discard some of the planks in order to avoid defects when finishing the walls.

In addition to class, the material may differ in the shape of the front surface. Examples of the most popular profiles are shown in the figure. If you want to create the impression of a log vault and walls, you can sheathe the walls inside the room with one of the types of boards - block house.

The technology of clapboard cladding is practically no different from the technique used for installing PVC. Initially, the starting strip is laid, and then the lining boards are laid on the previously filled sheathing. It is best to sheathe the walls of the veranda using staples, without glue or screws.

Larch is the most difficult to install, but it’s worth it. Even for the coziest veranda there is no point in purchasing cedar or ash if you need to sheathe the room quickly and inexpensively. The best option would be high-quality spruce or pine, which can be ordered inexpensively from a private carpentry shop, dried, and polished front part and cover with wax.

Even an open or unheated veranda can be covered with such cladding. A pleasant bonus will be the smell of pine forest, which appears when the walls of the veranda are heated by the sun's rays.

Conclusion

The most budget-friendly option for cladding the walls of the veranda will be made from wood-fiber panels or slabs. They are relatively inexpensive, and in terms of comfort, materials made from cellulose fibers are considered one of the best.

If the room needs to be made not only warm and comfortable, but also truly beautiful, then it is best to cover the walls with MDF boards. It will turn out inexpensive and beautiful, but it is worth remembering that the high decorative qualities of the slab are ensured by the glued polymer film; accordingly, the vapor permeability of the material is much lower than that of fiberboard. All the work will not cost much, but there should be no places in the veranda that fall outside the ventilation zone, otherwise the accumulating condensation will quickly destroy all the work.

The veranda can act as the main entrance to the house and a place for the whole family to relax, so fireproof and reliable cladding is required to finish its ceiling and walls. The material should protect from drafts and not allow heat to pass through in winter. For such purposes, a heat-insulating layer is placed under the finishing and then covered with a moisture-resistant film. If this is not done, water will enter the voids and begin to expand as sub-zero temperatures, destroying the material. Let's figure out what materials for external protection verandas are used most often.

Lining. An inexpensive and environmentally friendly material that is treated with an antiseptic to protect against microorganisms and insects. Paint or varnish, previously applied to the surface, helps protect the veranda from moisture. The components of the lining can simply be cut and attached to the wall with self-tapping screws or nails.

Siding. Does not fade even with prolonged exposure to direct sunlight, resistant to frost and high humidity. Metal siding is fireproof, but its polymer counterpart ignites and produces toxic smoke.

Facing brick. Its service life is practically unlimited. It is difficult to leave marks on it from impacts and even more so from scratches.

Polycarbonate. It has good strength and transmits light perfectly, since its plates are completely transparent. The shape is flat or, at the customer’s request, embossed. Products can be hollow or monolithic. The slabs mounted on the roof can withstand a layer of snow 1 m thick.

OSB. In many respects they can replace natural wood. They are often used to decorate floors and walls of open terraces. The slabs are temporary, which is confirmed by their low cost.

For interior decoration

Insulation inside is achieved when using mineral wool, as well as expanded polystyrene foam. For additional protection, polyurethane foam is used, which is sprayed onto the surface using special equipment. In order to protect the walls from rain and precipitation, polyethylene waterproofing is applied to its surface. The seams between the porous slabs are filled with waterproof polyurethane foam, and the joints are securely sealed with metal tape.

For insulation, it is enough to cover the internal walls with wooden clapboard or polyvinyl chloride panels, which can even be washed. MDF boards are another commonly used material that perfectly protects the veranda from heat loss. Their only drawback is the edges, which can crumble over time without proper antiseptic treatment.

Plaster specially designed for facades with a choice of desired color is not afraid of serious temperature changes and strong humidity. For finishing the floor The best decision– damage-resistant decorative tiles with increased strength. The most common option is varnished floor boards, which are not subject to abrasion for a long time.