≡× MENU

• Interior
• Window
• Walls
• Projects
• The buildings

Installation of aluminum ceiling profile. We install a slatted ceiling with our own hands: a master class with video instructions. The advantages of slatted ceilings include

High performance, presentable appearance and ease of installation are just a few positive properties, testifying in favor of aluminum slatted ceilings. We invite you to familiarize yourself with the features of this design and the technology of its installation. In this article we will tell you how to do it right aluminum ceiling do it yourself, we will show you photos and video instructions.

Slatted ceilings are one of the types of suspended ceilings. The suspension system allows you to attach slats made of different materials, including aluminum. They are made from plastic, aluminum or steel tape having a thickness of 0.4–0.7 mm, a length of up to 6 m and a width of 50–300 mm.

If you order blanks for a slatted ceiling at custom sizes, then you will be given the length of the slats with an accuracy of up to 1 mm.

Installation of the aluminum slatted ceiling is carried out only after completion of plastering and subsequent complete drying of the walls and floor finishing.

If you decide to install a ceiling made of aluminum panels in your bathroom or kitchen, then you will not regret it one bit, as it is not only reliable and durable, but also fits into almost any design. A large assortment Reek is able to satisfy the needs of even the most demanding customers. The slats come in smooth and perforated, matte and glossy. They imitate the texture of wood and even leather. As for the shape of the slats, they are rounded and rectangular. The huge number of colors and shades is simply amazing. The slats are installed along, across the ceiling and even diagonally. Thus, you can visually reduce or increase the space.

Such ceilings also differ in their inter-river joints. At open installation There are small gaps between the slats, equal to 15 mm. A decorative profile is attached to them. With a closed joint, the aluminum panels overlap each other. There are also slats that are joined closely, resulting in a blind joint, that is, without gaps.

A comb or universal support rail, an angular profile, as well as an adjustable suspension are the main components of the suspension system. The comb is a galvanized strip with special clamps into which the slats are mounted and secured.

As for the suspension, it consists of a rod and a bracket. In this case, the rod is attached to the main ceiling, and the bracket is attached to the supporting comb. The suspended ceiling is installed at a distance of 5–12 cm from the main one. This distance is determined individually, depending on the communications located on the ceiling and personal preferences.

If you have already decided on the color and type of ceiling, then you need to calculate the amount of materials:

• Measure the perimeter of the ceiling. This measurement will indicate required amount purchase of a U-shaped profile fixed to the walls, which will facilitate the neat connection of the ceiling to the walls.
• Calculate the length of the combs. To do this, mark the ceiling perpendicular to the direction of the decorative panels, in increments of up to 1 m.
• Determine the area ceiling covering. To do this, calculate the total area of ​​the room.

After this, you can buy the necessary set of materials for arranging an aluminum ceiling, according to the calculations you made.

Before you begin installing the aluminum slatted ceiling, you will need to collect the following tools and materials:

1. Ceiling kit with profiles, panels and stringers.
2. Hammer.
3. Dowel-nails and self-tapping screws.
4. Suspension elements.
5. Building level, tape measure, marker and ruler.
6. Screwdriver.
7. Pliers.
8. Drill.
9. Knife and scissors for metal.

If you mark the ceiling correctly, the installation will proceed without any difficulties. So, first of all, mark the perimeter. This is necessary for attaching the U-shaped profile. If you are dealing with a perfect ceiling, then you are extremely lucky. In this case, you simply need to draw a line at the desired height from the ceiling.

In the process of marking the perimeter along a ceiling that has different level, you will have to do more complex calculations. The distance from the edge of the wall in this case will depend entirely on the filling of the inter-ceiling space.

If no communications are hidden in the ceiling, then the indentation from draft ceiling should be minimal, namely 5 cm. But, before you make the markings, decide whether you want to mount it in the ceiling lighting devices. If so, a 5 cm indentation will not be enough.

Now make markings for the stringers. All lines you mark should be parallel to the side wall and to each other, and perpendicular to the end wall and the direction of the individual panels.

Using dowels, secure the U-shaped profile. Make indentations from the edges of 5 cm, and then make holes using a drill. The step between them for fasteners should be approximately 0.5 m.

Holes should be drilled with outside profile. This measure will allow you to avoid the formation of burrs that will subsequently prevent the profile from adhering to the wall. Prepare places for hangers in accordance with the existing markings. Adjustable hangers make it possible to level the ceiling. The extreme points should be located from end walls at a distance of 30–40 cm. Make intermediate points in increments of 1.2–1.5 m. Fix the stringers to which the aluminum slats will subsequently be attached. There should be a small gap of approximately 1 cm between the profile attached to the wall and the stringers. It is important to observe this condition so that during temperature changes finished ceiling not deformed.

Before installation ceiling structure, cut the panels to the specified length. It is important to make them 3-5 mm shorter than the distance between the profiles into which the end sides of the panels will subsequently be inserted. Now it's time to assemble the ceiling surface. Insert the panels into the stringers until there is a characteristic click, indicating that the slats are fixed to the comb.

If the last panel does not fit, then there is nothing left to do but cut it. Mark the cutting locations, then make perpendicular cuts on the side of the panel to be removed. Panel sections formed by cuts should be broken off by bending/unbending the aluminum. Tuck the rail into the profile screwed to the wall with the cut side off, and fix the other edge to the stringers.

To make this process faster, install the cut panel next to last, and last panel shorten by 14 mm.

When installing slats in series, you must insert them diagonally into profiles screwed to the wall. In contrast, the last panel must first be moved to the side, bringing its first edge into the profile as much as possible. This way, both ends of the panel will be evenly positioned in relation to the wall. Now you can fix the panel on the support rail.

Spotlights harmonize better with slatted ceilings. To do this, holes for them are made in advance. Draw a circle required diameter at the place where the lamp is installed. From the center of the circle to the outer line, make cuts along the radius. To do this you will need metal scissors. Bend the resulting petals into the inner side of the ceiling. The installation of the lamp will be of better quality if you make narrow petals.

When installing an aluminum slatted ceiling, make sure that the integrity of the finishing layer of the panels is not compromised during the process. Scuffs, scratches and other mechanical damage will only worsen the appearance of the finished ceiling.

Anodizing panels provides the most stable and durable coating, as opposed to other types of decorative finishes.

Aluminum ceilings get dirty faster in the kitchen. However, they are quite easy to care for. They are not afraid of water. This means that the surfaces of such ceilings can be washed with a sponge in a soapy solution.

Slatted aluminum ceilings are environmentally friendly, so they can even be used in the bedroom and children's room.

Video

We invite you to watch step-by-step instructions on how to make an aluminum ceiling yourself:

For quality repairs In the ceiling area, repairmen successfully use an aluminum slatted suspended ceiling. The simplicity of its installation and correction after installation allows you to carry out repairs of any ceiling surface.

Basic properties

For finishing works For the plane of the ceiling surface, an aluminum slatted ceiling will probably suit you best. The ease of use and attractiveness of the result of this type of material (aluminum slats) will satisfy anyone, even the most demanding craftsman and consumer.

If we look closely at the finished folded section, we see that the aluminum slats do not stand out individually, creating the appearance of a coherent area. This cannot be said about the cassette ceiling section, which is assembled from individual square parts. Mostly, the laid slats look like one smooth, dense piece.

Advice! During installation, slats of different types and colors are used. You also have the opportunity to combine various sizes to bring your idea to life.

On this moment There are aluminum slatted ceiling surfaces of two names:

• aluminum suspended ceiling with smooth surface. The peculiarity of assembling such a ceiling is that at the end of the work you will see small gaps between installed slabs. This type of surface is very practical and convenient, but it will look less aesthetically pleasing (however, the taste and color...);
• suspended ceiling with alternating profiles. Installing this type of ceiling is a pleasure. Short inserts, elements that balance the structure, are also mounted between the parallel-fixed slats. After such installation you will not have to adjust the shape of the ceiling. The planks can be selected in different colors.

In order for the surface of the ceiling to be mounted to be as smooth as possible, you must first install traverses (they are also called combs). They have the form of longitudinal tires attached to the ceiling section. Fastening the aluminum strips to the traverses is the second stage of the work. The planks are attached using special latches, which automatically fix the surface of the plank with the surface of the traverses.

Important! The advantage of this type of mount is that you do not use additional devices for fastening.

Advantages of installing aluminum slatted ceilings

The material from which this type of structure is made is considered the best among other types of panels, and in many respects. The installation of slatted aluminum ceilings has a number of advantages:

• Aluminum strips are less susceptible to damage different types(temperature changes, rust, excessive dryness or humidity of the room, sedimentation of salts, the destructive effect of microorganisms).
• This material is ideal not only for home renovation, but also for rooms common use(at train stations, airports, metro stations, hospitals, schools and other premises).
• Easy to use and install. This will allow you to quickly, reliably and without extra costs install the ceiling in time. You don't need to pay a specialist for work. You can do everything yourself. And such a design will serve for a long time and reliably.
• Possibility to level the surface of the working area. No costs for materials for putty, primer, etc. You can only create the desired shape of the ceiling section using aluminum slats.
• This can be either a simple flat canvas or various multi-level structures. On uneven surface under different angles Traverses are attached, and aluminum strips are placed on top of them. The result is a very durable and safe structure. The technical characteristics of this type of design are at the highest level.
• External view of a suspended ceiling surface. In addition to the above advantages, there is one more advantage in installing a slatted ceiling. important point- This is an external aesthetic appearance.
• It is important when installing suspended ceilings to take into account how it will all look at the finish line repair work. Aluminum panels can be painted with special powder paints. These paints are available in an incredible range of colors and shades, so you can choose the one most suitable for your room.

What materials to choose for installation

What should you buy before you start installing slatted ceilings? And how much does it cost required material? The list of required goods includes:

• traverses (another name for a comb/tire for fastening). Calculate the quantity according to your square footage of the room;
• aluminum slats (main profile). This is the very basis of the ceiling. Choose the width of the strips you need. You can take different profiles, in case you need to create a multi-level structure;
• starting profile. It is used to outline the perimeter of the room and lay the foundation for attaching traverses;
• intermediate multi-colored inserts. They are needed to fix the planks themselves;
• pendants. They look like records. They are needed to attach the main frame to the ceiling. If there is a large distance between the ceiling and the installed ceiling, it is better to use suspensions in the form of springs;
• required quantity self-tapping screws, dowels;
• Spotlights, chandeliers and other lighting fixtures.

Tools you need

The installation of a slatted ceiling is impossible without special tools:

1. level (it will be ideal if you have a laser level, which in their properties is much more accurate than ordinary construction ones);
2. roulette;
3. perforator;
4. pencil;
5. metal scissors;
6. screwdriver;
7. hidden wiring finder.

How to install a ceiling made of metal slats

The installation of this type of ceilings such as aluminum slatted ceilings is sufficient universal solution for modern design of premises of all types. To mount the ceiling slatted frame, you must follow these instructions:

First phase– this is setting the starting profile. It is mounted according to a pre-applied marker. Using a hammer drill, connect the profile to the wall. Make the required number of holes. Then dowels are inserted into the pre-prepared holes. The profile is finally strengthened with screws.

Advice! Every half meter you need to secure the profile.

Second phase— hangers are installed on the ceiling. Then the traverses are attached to them. Then all the aluminum strips of the suspended ceiling follow. A separate strip is attached to each individual traverse. The desired shape and size are adjusted using metal scissors. Then the measured panel is attached to the busbars using latches. The edges of the slats should extend beyond the starting profile.


At the end, inserts are mounted between the slats, lengthwise and lengthwise. Aluminum slats will form the final version of the suspended ceiling.


Third final phase - install lighting. To do this, you need to make holes for the light bulbs in the rack in advance. Why in advance? The answer is obvious - it will be much easier for you to make the correct cuts on the floor than on weight.


A ceiling made of aluminum slats has a number of positive characteristics. This is both ease of use and available materials, reliability and practicality. You can even do without a master and do all the work yourself.

Important! Such a suspended ceiling surface can be mounted in any room and at the same time be sure that your suspended structure will stand and decorate on the ceiling for more than one year. And we can’t even talk about the 100% elegance and sophistication of such a ceiling surface!

Dividing the suspended ceiling into zones

Before installing the main structure, you need to divide the working area of ​​the ceiling into sections. To make the next steps easier, you need to consider the following rules:

Slatted aluminum ceilings are not the most popular, but still quite common designs that have a fairly wide scope of application. Such ceilings have an interesting set of performance characteristics that allow them to be used similar designs both indoors and outdoors, and their installation is quite simple, and can be performed even by an inexperienced craftsman. This article will discuss the features of slatted aluminum ceilings and the technology of their installation.

Specifications

Suspended ceilings made of aluminum profiles are not the new kind finishing, but it appeared in the domestic space relatively recently. However, popularity is growing very quickly, which is due to practicality, good decorative properties and other advantages of such structures.

A suspended ceiling made of aluminum slats has a lot of advantages, among which the most prominent are:

1. Moisture resistance. Aluminum is a material that can easily come into contact with moisture. Thanks to this quality, aluminum ceilings are actively used in rooms with high humidity.
2. Fire resistance. Aluminum structures have the highest degree of fire safety, which allows them to be used where regulations fire safety must be observed very strictly.
3. Good reflective properties. The aluminum profile ceiling reflects light well, which makes it possible to use lower power lamps and thereby save on electricity.
4. Environmental Safety . Aluminum does not emit any aggressive substances during operation, which suggests that it is safe for human health.
5. Resistance to biological damage. Aluminum ceilings do not rot over time and are not susceptible to mold or germs.
6. Ease of maintenance. To maintain the normal appearance of aluminum slats, you only need to occasionally wipe them with a slightly dampened sponge.
7. High mechanical strength . Like any metal products, aluminum slats have a high resistance to mechanical loads. Due to the combination of high strength and moisture resistance, aluminum structures have found excellent application in the field of external cladding premises.
8. Easy to install. The design of the aluminum slatted ceiling includes only a few parts, each of which can be installed without any difficulty.
9. Light weight. The low weight of aluminum not only simplifies the installation of an aluminum ceiling, but also allows you to relieve the load on the ceiling to which the entire structure is attached.
10. Good visual performance. Aluminum slats can be used to create decorative structures. The only caveat is that such elements look rather “cold”, so they are not recommended for installation in recreation areas, bedrooms and children's rooms.
11. Durability. An aluminum suspended ceiling can last from 20 to 50 years without replacement.
12. Maintainability. If necessary, any element of the rack structure can be replaced without dismantling the entire aluminum ceiling.

Rest specifications slatted aluminum ceilings look quite simple. Standard thickness aluminum slats is 0.3-0.4 mm, and the length is 3.4 m. If it is necessary to arrange an aluminum ceiling in large rooms you can search non-standard options– for example, individual slats can be up to 6 m long.

Classification of aluminum slatted ceilings

Rack and pinion dropped ceilings made of aluminum profiles can have different colors slats, their sizes and methods of fastening, but the main classification is carried out according to the type of construction:

1. Open. Open aluminum suspended ceilings are installed so that there is a small gap between the individual slats. To mask this gap, special inter-rack inserts are subsequently used. Open ceilings have good ventilation and the ability to create a variety of colors.
2. Closed. In this design, the slats are connected tightly and form a tight smooth surface no gaps. To ensure that the design does not end up being monochrome, it is worth selecting slats with different visual features.

What does it consist of?

The installation of slatted aluminum ceilings includes the following elements:

1. Stringers(another name is traverses or combs). These elements act as carriers to which the main slats are attached. Stringers are profiles, in the upper part of which there are teeth for attaching hangers. Aluminum or galvanized steel can be used to make stringers.
2. Slatted panels. These elements are made by cold pressing from thin aluminum. Thanks to the special cross-sectional shape, the panel achieves high strength - it does not bend even under load. Aluminum slats are always coated with special paint or varnish - the presence of a high-quality coating protects the product from external damage. Standard width stripes - 10-20 cm. You need to select a specific size depending on the characteristics of the room and the planned design. You can also find curved slats on sale.
3. Adjustable hangers. These parts are designed to mount stringers and align them vertically, thereby creating a smooth finish. horizontal surface. The suspension design includes a rod and a bracket. The first is attached to the ceiling, and the second allows you to fix the stringers.
4. Interrail inserts. These parts are narrow panels made of aluminum. They are used to hide the gaps between the main panels when arranging an open slatted ceiling.
5. Corner profile . Such elements are decorative and are intended to disguise the joints of the ceiling and walls.

To avoid errors during the installation of an aluminum ceiling, it is recommended to select individual elements from one manufacturer. If this condition has been met, then the result will be a high-quality structure, which, among other things, can be very easily dismantled to service the communications hidden behind it.

Calculation of rack ceiling

When installing an aluminum slatted ceiling, you need to calculate in advance the required number of components:

• First of all, the length, width and area of ​​the room are measured - parameters that allow you to determine the required number of slats;
• The width of the room is divided by the total width of the panel and insert, which makes it possible to choose optimal quantity elements (it is recommended to buy slats with a small margin);
• To calculate the number of profiles, you need to calculate the perimeter of the room and add 3% to it, which will compensate for trimming;
• Next, the total length of the stringers is calculated using the formula V = (H / 0.9) * L, where L is the length of the room, H is the width of the room;
• By calculating the length of the stringers and knowing the size of one part, you can easily calculate their number;
• To determine the number of hangers, the total length of the stringers is divided by 0.3.

If calculations result in fractional numbers, they should always be rounded up.

Installation technology

To assemble an aluminum slatted ceiling, you need to prepare in advance following materials and tools:

• A set of materials for arranging the ceiling;
• Drill;
• Construction level and tape measure;
• Grinder or metal scissors;
• Screwdriver;
• Water or laser level;
• Hammer;
• Screws or dowels.

Installation of an aluminum ceiling begins with marking:

• An indent of approximately 20 cm is taken from the corner of the room, and the required distance from the ceiling is measured in this area (for example, 10 cm);
• Then, using a water level, this level is transferred to all other walls and marked.

This stage of work is very important - correct marking of the future ceiling will make it smooth and of high quality. When marking, it is necessary to take into account the dimensions of the used lighting fixtures. For example, if spotlights will be installed on the ceiling, then the ceiling must be lowered to the height of their body. The same principle applies to any lighting fixtures.

Further installation of the aluminum suspended ceiling is carried out as follows:

1. Starting from the marked level, you need to measure the length of the wall and cut the profile suitable size, considering that it standard length is 3 m. Profiles are cut for each wall so that the required number of guides can be installed along the entire perimeter.
2. The guides are secured in place using screws and dowels. The optimal fastening step is 50 cm, but when fastening to insufficiently strong walls, it would be better to increase the step.
3. Guides suitable for internal corners rooms are connected end-to-end. If individual elements have to be mounted on external corners, then their edges need to be cut at 45 degrees.
4. Next, the attachment points for the stringers are determined. The first mark should be at a distance of 40 cm from the wall, and all subsequent marks should be located in increments of 1 m.
5. Suspensions are installed in accordance with the installation locations of the load-bearing elements. The hangers must be placed strictly at the same level, but they can be finally leveled after installation. The elements are fixed to the ceiling using dowels.
6. The next step is installation of stringers. These elements must be installed flush with the profiles and placed perpendicular to the slats. The distance between the individual support rails should be no more than 100-120 cm. During installation, every effort must be made to ensure that the individual elements are installed correctly - the evenness of the finished ceiling directly depends on this.
7. When installing tires, a situation may arise when one part is not enough to fill the entire length. In such cases, you need to connect the main part of the stringer with the additional one using a butt joint.

When the previous elements are installed, you can begin installing aluminum ceiling slats:

1. First of all, you need to remove the protective film. Next, the distance between the opposite walls is measured. The rail that will be installed in this place is cut so that its length is 3 cm less than measured.
2. The panel is installed in the stringer and secured along its entire length with clamps. All nearby slats are mounted in the same way. If it is necessary to adjust the height of a specific section of the ceiling, you can use hangers, the length of which can be adjusted.
3. If the last aluminum ceiling batten in a row is too wide, it will need to be cut. To determine the required size, you need to start from the length of the slats. Using a ruler or a long rake rule using construction knife is cut lengthwise and neatly broken along the cut line.
4. It is recommended to cut slats of excessive length in parts, first making a transverse cut. After installation, the cut panels are fixed with wooden spacers on the wall side. The other edge of the part is fixed with stringer tongues.
5. At the very end you can install decorative skirting boards, which close the cracks and joints near the wall, thereby making the ceiling structure complete.

When the aluminum slatted ceiling is assembled, you can perform any work on it - for example, installing lamps. To do this, holes are cut in the required areas. The notched aluminum “petals” are bent into the inner side of the structure. To make the cut out part of the rail look normal, it is recommended to make more cuts - then the hole will be more rounded.

Conclusion

Suspended ceilings made of aluminum slats are good decision for a certain range of tasks. Good technical characteristics make aluminum ceilings quite reliable and durable, and ease of installation allows you to install such a structure even in the absence of experience in construction work.

The slatted ceiling occupies a special place in modern interior housing, as it allows not only to create original design, but also hides all the flaws of the load-bearing surfaces. Unlike other hanging systems, these structures can be installed even in rooms with high humidity.

Thanks to the huge selection of colors and textures, such ceilings are well suited to any style of room design. They are characterized by excellent performance properties and are easy to assemble, so installation work can be done independently, without the help of specialists.

Peculiarities

The slatted ceiling is modern look ceiling structure, which consists of a frame system covered decorative panels. Usually finishing material made of aluminum (0.3-0.6 mm thick), but there are also slats made of plastic and steel. To give the product a more aesthetic appearance, manufacturers often coat the panels with varnish.

Installation of a slatted ceiling depends on the size of the slats, since they can have different lengths: from 50 to 200 mm. Therefore, before starting installation work An accurate calculation of the material must be made.

It is worth noting that the slatted ceiling is much stronger than traditional PVC structures, but it looks more massive and can be subject to corrosion processes.

The system frame is assembled from skirting boards, hangers and load-bearing profiles, which are equipped with special grooves. Suspensions can be used with both spokes and springs. As for the skirting boards, they are U-shaped and are designed to hide the edges of the slats and give the ceiling a beautiful look.

Suspension systems made from slats have many positive characteristics, which include:

• practicality and durability;
• wide range of designs;
• moisture resistance;
• ease of installation;
• a light weight;
• wide scope of application;
• easy care.

Therefore, by installing such ceilings in rooms, you can not only decorate the interior in an interesting way, but also not think about new renovations for many years.

Kinds

Today, manufacturers produce slatted panels with various elements decor, using the most modern technologies. Thanks to this, the material has high quality and can acquire original colors and textures. The front side of the slats can be either embossed or smooth; coated with matte or glossy varnish.

Such ceilings, depending on the design features, are divided into two types:

• Indoor. The slats are installed in such a way that the gaps between them remain open. Upon completion of finishing, they are decorated with special inserts.
• Closed. Installing panels in this way creates a monolithic surface that does not require additional decoration.

In addition, the slats may differ in shape:

• "Italian". Their corners have a rounded appearance.
• "German". The panels are produced with strict rectilinear outlines.
• Designer. This finishing material is made to order, and it can be presented in complex geometric shapes. Therefore, the ceiling turns out to be original and unusual. Often slats in the form of the letters S, V or P are chosen for the interior.

Since a non-standard profile is used for installation, the system installation process is considered complex.

In order to choose the right the right type slats, you should take into account not only their beauty and personal preferences, but also the functional purpose of the room and its level of lighting.

Panels suspended structures produced from different material, which can be combined with any design details. Typically slats are made of aluminum, steel and plastic.

• Aluminum slatted ceiling is the most popular option in the interior. It has a lot of advantages, as it includes all the positive properties of plastic and metal. Aluminum withstands temperature changes and moisture well. It is lightweight, durable and also resistant to corrosion. Also, the material does not support the combustion process and is not flammable.

Aluminum structures look great in the design of kitchens and bathrooms.

• Suspension systems steel type , as a rule, used for decoration storage facilities and offices. Steel is characterized by high sound insulation, is durable, but does not withstand moisture and can rust. Therefore, the surface of such metal ceiling should be well treated with special mixtures and try not to install it in rooms with an unstable microclimate.

• The ceiling made of plastic slats has also proven itself well., since it is inexpensive and is in no way inferior to previous options (according to external characteristics). The material is not afraid of moisture, but is fire hazardous and supports combustion. Therefore the installation plastic ceiling not possible everywhere. For example, in the kitchen (under the influence of constant evaporation and high temperature), the material loses its attractiveness and begins to fade.

In addition, plastic quickly fades in the sun.

There are also slats made from natural wood. Undoubtedly, wooden ceiling will be a chic addition to any interior, but purchasing the material and installing it will be very expensive. Therefore, most owners prefer cheaper and practical types material.

Installation

You can install a suspended ceiling system from slats either with the help of specialists or on your own. If the structure will be assembled with your own hands, then it is necessary, first of all, to draw a design future design, perform calculations and purchase all components.

To do everything correctly, novice craftsmen need to follow step-by-step instructions.

• At the first stage of work in the room where it is planned to install the ceiling, repairs should be carried out and the surface of the slabs should be prepared for covering. To do this, clean the base from the old finish and seal it with plaster. large cracks. Then you need to collect all the furniture and things in the room: they can be taken to another room or covered with film.
• At the second stage, it is important to determine the installation location of the chandelier and lamps.

• The next step in the installation will be marking the height of the future ceiling. The best way to do this is with laser level. The points are marked on the wall, and from them a line is drawn along which the guides and starting profile will be installed. If the walls of the room are lined with decorative tiles, then the installation of the structure should be carried out taking into account its seams. Otherwise, the ceiling composition will be visually skewed (even regardless of whether the slats are assembled horizontally or vertically).
• Then the fastening is done starting profiles. They must be cut to the dimensions specified in the installation diagram. Points for drilling holes are marked in the profiles and, using a drill, places for fastenings are drilled from the outside. A similar procedure is done for the holes for the dowels.

In order not to compromise the integrity of the structure, the profiles at the corners can be bent or cut at an angle of 45 degrees.

• Then you need to assemble the guide profiles and mark the places for fixing the hangers. The hangers should be mounted in such a way that the distance between the traverses is 120 cm. At the same time, the step between the hangers themselves should not exceed 60 cm. This technology will make the structure strong and reliable. Traverses can be mounted to the suspension either using dowels or using special fastenings, which are often included in the kit.
• When Basic structure ready, all that remains is to assemble the slats. This is not difficult to do, because each of the panels has a comb with which the slats are simply snapped onto the profiles. It is advisable to carry out installation using gloves to avoid getting dirty or scratched. decorative coating material. The outer slats are cut to size.

To do this, according to them inside carry out several times with a knife, make an incision with scissors and break off.

Manufacturers

IN Lately The construction market is represented by ceiling slats from both domestic and foreign manufacturers. Has proven itself well Cesal products. It is very popular because it has proven itself to be of high quality and positive reviews consumers. The slatted ceilings of this company are characterized by wide choice shapes, sizes and colors.

In addition, the finishing material has all quality certificates and undergoes a unique processing, thanks to which three-layer enamel is applied to the surface of the panels. Therefore, this finish is not afraid of mechanical damage, is resistant to moisture, high temperature and corrosion processes.

Widely used and Albes products. The company produces aluminum slatted ceilings, which differ modern design. Perforated panels look especially beautiful in the interior. They are produced in both closed and open design types. At the same time, the set of open ceilings necessarily includes stylish and interesting inserts, thanks to which the design of the room turns out chic.

Also deserves special attention manufacturer Geipel. This company appeared on the market quite recently, but has already managed to establish itself with best side. The slatted ceilings of this production have stylish look And original decor. In addition, during the manufacture of slats, the company uses only environmentally friendly raw materials, which are safe for health and perfectly withstand the effects of external factors.

The process of assembling a slatted ceiling is simple, but novice craftsmen who will be doing this for the first time need to know how to correctly draw a diagram of a suspended system, attach the structure and select the material. Simple tips will help you avoid installation mistakes.

• Before installing the ceiling, you should take accurate measurements of the room, taking into account the presence of niches and protrusions.
• You need to choose in advance how to attach the slats. If the elements are placed lengthwise, the room will be visually longer, and the transverse direction, on the contrary, will expand the space.
• In addition, panels with a matte surface are best installed in bathrooms, while panels with a glossy surface are best installed in corridors and passers-by.

• For gapless installation, it is recommended to place the slats along the viewing direction. This way the seams will not be noticeable.
• The most difficult is considered diagonal installation panels, it is better to entrust it to specialists.
• Profiles should be purchased with a reserve. For finishing indoor ceilings standard size As a rule, I use 70-100 mm strips.
• The protective film from the slats can only be removed immediately before fastening, otherwise they may become damaged and dirty.

Slatted ceilings have firmly occupied their niche in construction market, displacing some species ceiling decoration. Modern aluminum suspension systems have a wide range of applications. Due to their excellent technical and operational qualities, such ceilings are used not only indoors, but also outdoors. Various shapes and textures, a rich range of colors allow you to realize any design fantasy.

Not the last argument in favor of narrow metal panels is the ease of installation. Even an inexperienced craftsman can install a suspended ceiling.

Aluminum slatted ceiling: technical characteristics and operating features

Hanging ceiling systems have been used in interior decoration for 60 years. In Russia, this type of ceiling cladding is only gaining popularity. Many experts and consumers have already appreciated the practicality, decorativeness and other advantages of aluminum coatings.

Let us note the main technical and operational characteristics of aluminum slatted ceilings:

Most often, aluminum suspended ceilings are installed in public spaces: swimming pools, gyms, offices, medical institutions. This cladding looks impressive in the halls of large administrative buildings, hotels and restaurants. In apartments and private houses, it is advisable to place them on loggias, balconies, bathrooms and landings.

Types of aluminum slatted ceilings

Aluminum slatted ceilings differ in the color of the slats, its width, profile and method of fastening. Based on the type of device, there are two types of ceilings:

Constructions open type. The principle of installing ceilings of this type is to install the slats in such a way that there is a small gap between the elements. Subsequently, this gap is closed with inter-slat inserts.

The main advantages of “open” ceilings:

• excellent ventilation of the ceiling space;
• play of colors - by combining inserts of contrasting or harmonious shades you can create an original ceiling design.

Dropped ceilings closed type . The slats are fixed tightly to each other, forming a continuous smooth surface without breaks. To avoid monochrome, you can use frames of different textures and colors.

Installation of aluminum slatted ceilings

The suspended aluminum slatted ceiling has enough simple design, consisting of the following elements:

Important! To avoid fastening errors and the appearance of cracks during ceiling assembly, the slats and stringers must be from the same manufacturer.

Thanks to the convenient fastening system, aluminum slats can be easily dismantled and reinstalled if access is required. engineering communications, hidden behind the ceiling.

Calculation of slatted aluminum ceilings

Before starting installation, it is necessary to correctly calculate the components. To do this, the room is measured - the area of ​​the room is determined (the length is multiplied by the width). This value should be used as a starting point when calculating the number of slats.

Important! If the calculation results in a fractional number, it must be rounded up.

Installation of aluminum slatted ceilings: step-by-step instructions

To implement the project you will need the following materials and tools:

• set of aluminum slatted ceiling (rail, suspension, plinth, slats and lamps);
• electric drill;
• building level and tape measure;
• metal scissors or grinder;
• screwdriver;
• water or laser level;
• perforator;
• dowels/screws.

The first stage of the work is applying markings. The evenness of the ceiling largely depends on the quality of the application of landmarks. For this work, you will need a water/laser level, a pencil/ruler, and painting thread.

Important! The level of placement of the suspended ceiling depends on the type of lighting fixtures. To install spotlights, the height of the structure should be lowered by 12 cm (body height). When using a chandelier or surface-mounted lamp, the distance from the base of the ceiling can be reduced.

The procedure for applying markings:

Subsequent installation of a suspended slatted ceiling:

Installation sequence of aluminum ceiling slats:

Once the installation work is completed, spotlights can be placed on the ceiling. To install them, you will need to make holes in the aluminum slats. In the right place on the panel, you need to draw a circle, and from its center, make radial cuts towards the outer line (you should get “petals”). It is convenient to make all cuts using metal scissors. Bend parts of the circle inside the rail. The circle for the lamp will be of better quality if the cuts are made with a small distance from each other.

Installation of aluminum slatted ceiling: video

Aluminum slatted ceiling: photo ideas for use in the interior

Aluminum slatted ceiling in the kitchen. The versatile direction of the slats gives volume and visually expands the space of the room.

Two-level ceiling with built-in lamps and chandeliers. The ceiling fabric is made of matte aluminum lamellas.

Aluminum suspended ceilings - best option for swimming pools. A multi-level slatted ceiling made of straight and curved slats reflects the shine of the water and resembles an imitation of sea waves.

A relief aluminum slatted ceiling (price starts from 1,500 rubles/sq.m.) with glossy and matte inserts changes the perception of space and the room as a whole.

Combining a slatted ceiling with plasterboard multi-level structures - interesting option For office premises and administrative buildings.