Canopy lining. How to make a canopy over a porch with your own hands - detailed instructions. Why is polycarbonate sheet so attractive?
A canopy over the porch, mounted using polycarbonate sheets, is practical and at the same time stylish solution to protect against all sorts of natural surprises. At the same time, along with purely practical functions, it also plays an important aesthetic role, as one of the elements decorative design building. The photo shows some amazingly beautiful decorative polycarbonate visors that give unique view the entire appearance of the house.
Advantages of protective polycarbonate structures over the porch
Polycarbonate canopies installed above the porch carry whole line functions that make them an important element of the entire structure of the house.
Let's take a closer look at all the stages of making such an external canopy on the porch or entrance doors to the house.
Types of polycarbonate
On modern market building materials, there are several varieties of this polymer that can be used to construct a visor.
Cellular. The most common and popular variety, widely used on the farm. Structurally, it consists of two thin sheets connected to each other by longitudinal bridges. The result is a structure from the inside that looks like a honeycomb, which is where its name comes from. The main advantage cellular polycarbonate is its low cost and practicality in use. Standard sizes such sheets can be either 2 x 6 or 2 x 12 m. The thickness of the sheet can range from 4 to 16 mm. Such sheets are painted in the most various colors, which makes them an excellent option for decorative design of the facade of a building.
Monolithic. As the name suggests, such a sheet consists of a solidly molded polymer that does not contain air voids inside. It differs from the previous type by increased strength and resistance to various mechanical damage. At the same time, in terms of transparency it is practically not inferior to glass. Its only disadvantages are higher cost and more complex processing.
Wavy. Is a variety monolithic polycarbonate, characterized by a wavy shape. This makes it even more durable due to the waves, which are stiffening ribs. A visor made from such material can easily serve you for decades. But its cost, unfortunately, is even higher than that of a monolithic polymer.
First stage. Design selection
Making a polycarbonate canopy with your own hands is not such a difficult task - the main thing is to take this matter seriously. First of all, you need to decide on the type of structure. You need to decide whether the visor will be made in the form of metal or wooden structure. A metal frame is much more durable, and with appropriate craftsmanship it looks much more aesthetically pleasing than a wooden one. However, to create a decorative metal carcass with your own hands, you will need to put in a lot more effort.
However, today it is quite possible to order or purchase in hardware store ready-made elements metal frame of various configurations. If you decide to make a metal frame with your own hands, you need, at a minimum, to be qualified as a welder. But if you want to create something extraordinary, for example, in the Baroque or Empire style, then you will need quite a deep knowledge of blacksmithing.
The simplest option is to make a canopy over the porch from wood. Of course, from the point of view of durability and its decorative qualities, this option is inferior to a metal frame. However, with appropriate skill in handling wood, you can make a structure that is quite strong, durable and beautiful.
In the same way, the size and shape of the frame depends only on your aesthetic preferences: will it be small visor directly above the entrance, or an extensive canopy along the facade of the house.
Second phase. Visor drawing
The next stage is drawing up a drawing future design. To do this, use a tape measure to remove everything required dimensions porch and transfer them to paper at the scale we need. Using this drawing of the porch, we determine the amount of materials we need - polycarbonate, wood or metal. After this, we purchase everything necessary and proceed directly to making the visor.
Third stage. Making a frame with your own hands
After this, again based on the drawing, we begin preparatory work to create a visor. First of all, you need to mark and cut the material according to the prepared dimensions. The metal frame is best made from profiled square or rectangular section. You can also use forged ready-made frames— they do not require additional supports and are attached directly to the wall of the house. Another option is a frame, one side attached to the house, and the opposite side resting on support pillars. This design is usually used when there is sufficient large sizes canopy
Installation of supports
If you have taken on the task of installing a canopy over the porch with your own hands, then you will need to choose the type of installation of support pillars. The supports for the canopy over the porch can be made from any material. Will fit wooden poles, metal or asbestos cement pipes. They can be attached either to the surface of the porch or directly mounted on the ground. In the first case, wooden supports can be attached to the porch using anchor bolts. For installation on the porch surface metal poles You will need to weld embedded plates with holes for bolts to the bottom of the pipe, with which they will be secured.
Another option is a structure separate from the porch, resting directly on the ground. To do this, dig holes 30 -50 cm deep, at the bottom of which they arrange gravel bed 10 cm thick. Then metal or asbestos-cement pipes are installed in them, which are filled with concrete. The canopy frame is mounted on top of the resulting supports using welding or bolts.
Canopy frame
The types of canopies over the porch can be completely different - arched, straight single-pitch or gable. It all depends on the shape of the frame you are going to make. In this case, you need to be guided by both practicality and aesthetics, since the canopy over the porch essentially becomes the “face” of the entire house. In this case, the distance between the rafters should not be made wider than 50 cm. During operation, such a fairly light material as cellular polycarbonate can experience quite large loads in the form of snow, which, if the distance between the rafters is too large, can lead to its breakage, cracks or curvature. After assembly, both wooden and metal frames must be processed by special means, extending their service life.
Roofing device
The most technologically advanced material when constructing a canopy over a porch with your own hands is cellular polycarbonate - it is quite light and can be easily processed. This material can be cut with almost any tool - an angle grinder, a knife, a jigsaw. At the same time, it does not crack or break. And when installing it on a frame, thanks to its flexibility, it easily takes the desired shape. At the same time, critical stresses are not created inside the sheet, which could lead to destruction of the material in winter.
The only thing that is recommended to do when working with cellular polycarbonate is to close its ends with special covers after installing the canopy over the porch. The point is that when high humidity air, especially in autumn and spring, condensation accumulates inside the leaf cavities, which freezes when the temperature drops at night, sometimes tearing the thin bridges that hold the plates together. And this, in turn, can significantly reduce the service life of a polycarbonate roof.
Bottom line
As you can see from all of the above, making a visor with your own hands is not so difficult. The most important thing here is to be able to hold an instrument in your hands, and to have some creative skills. First of all, have a penchant for spatial thinking in order to clearly imagine what kind of protective structure you would like to see over your porch. It is also important to be able to draw up drawings and work with them. Otherwise, it all comes down to patience and skill, without which it is impossible to build even such a sufficiently large one with your own hands. simple design, like a canopy over a porch.
The construction of a house is carried out in stages and the installation of a canopy over the porch is considered the final stage of any construction. The canopy protects the porch from precipitation and sunlight.
When making a canopy, as an integral element of blood, a variety of materials are used. But only polycarbonate, a modern, inexpensive and widely used building material today, has distinguished itself with great practicality, ease of installation and reliability.
Polycarbonate and its advantages
Transparent polymer-based plastic is a good alternative to the usual glass. Polycarbonate is gradually replacing other materials in construction market, thanks to their amazing properties, affordable price, wide range of applications.
Attention ! Polycarbonate is used not only as roofing material, it is very often used in the manufacture of lenses, compact discs and computer parts.
Depending on the structure of a given polymer, a distinction is made between monolithic and cellular polycarbonate, the production of which is carried out in the form of sheets of different sizes and thicknesses, on which the main characteristics of this polymer material depend. Let's take a closer look at each type.
The monolithic view is one-piece polymer sheet, characterized by high light throughput, which is almost as good as glass. The construction material universal, manufacturers often use it instead of glass. There are no cells or voids in the sheets.
Cellular polycarbonate is a lamellar sheet with a cellular structure. The cavity inside the sheet is filled with air, due to which the material has excellent thermal insulation characteristics. Thin plates within the sheet are connected to each other by jumpers.
The main characteristics of polycarbonate include:
- ease of installation
- light in weight (almost half as light as glass)
- transparency, the polymer is not inferior and even surpasses plexiglass in some respects
- resistance to abrasive chemicals;
- resistance to mechanical stress, scratching the material is quite difficult.
Attention ! An innovation in the production of polycarbonate has become an anti-abrasive monolithic type with increased strength and resistance to mechanical, chemical and thermal influences.
Types and options of polycarbonate canopies
It is not necessary to have extensive experience working with this material in order to build high-quality polycarbonate with your own hands, giving your home a finished look. Of course, first you need to draw a drawing indicating all the dimensions of the future canopy for the porch, develop your design taking into account the tastes and wishes of all family members. The polycarbonate canopy over the porch can be made in several variations:
- Canopy at an angle, mounted on supports. The design is simple, easy to install, only a couple of sheets are required for construction plastic material. A sheet laid on a slope will prevent water and snow from entering the structure. But water from melting snow and rain will flow from the roof onto the path in front of the porch, resulting in a puddle. This is the only, but significant, disadvantage of this design.
- Porch canopy in the form of an arch, mounted on 4 supports. This beautiful semicircular arch-shaped structure is suitable as an extension to a porch of any size and design. It doesn’t take long to build such a canopy for a polycarbonate porch with your own hands, but first you need to install 4 supports around the perimeter of the porch.
- Installing a semicircular canopy with two supports will the best solution for the beginning builder. There is no need for complex calculations when drawing up a diagram; it is enough to attach the wall canopy with two brackets to the wall, and for grace, decorate the frame with forged objects or drawings.
- A canopy combined with a platform near the house will look original. This option will require the installation of fairly powerful supports due to the increased load. The frame will serve semicircular trusses, it is important to calculate the expected load on them as accurately as possible. Such combined structures look like a semi-enclosed room in which it is convenient to park cars without fear of snow or rain getting into them.
Preparation for construction
Before making a canopy over a polycarbonate porch, you need to draw up a project, a drawing and think through its design in advance. Do some preparations.
Make a project, be sure to think it through desired design, do correct calculations to purchase the required amount of building materials. On the drawing, indicate the weight and dimensions of the polycarbonate sheets, taking into account that standard width roofing material - 210 cm, and length - 300, 600, 1200 cm.
Mark the location of the guides on the drawing; taking into account the size of the sheet, they should be installed at a distance of 70 cm from each other. The supports should be placed at a distance of no more than 200 cm from each other.
Prepare the tools so that they are in good condition at hand during the work. If the base of the polycarbonate canopy over the porch of a private house is steel, then you should take care of purchasing the following tools:
- Bulgarians;
- roulette;
- building level;
- bayonet shovel;
- screwdriver;
- jigsaw;
- electric drills;
- welding machine;
- stepladders, as you will have to work at height.
To install a polycarbonate canopy over a porch, you need to purchase following materials:
- the main material for the roof, in this case it is polycarbonate;
- welding electrodes, corrugated sheet pipes for installing supports, lathing and beams;
- fasteners for polycarbonate sheets;
- self-tapping screws for working with metal;
- tape for insulating the end sides of polycarbonate. You also need to prepare a concrete solution from cement, sand and crushed stone.
Attention ! Required amount It is important to calculate the material before going to the store. When making calculations, you always need to reserve 15% of material; even experienced builders make mistakes when installing a structure.
Only after all the material has been prepared and purchased in the right quantity, you can begin installing the canopy.
Installation stages
Construction work to install a polycarbonate canopy over the porch of a private house requires consistent phased implementation. Let's look at installing a canopy using the example of a canopy on 2 support posts. This type of installation is not complicated, and the canopy will look attractive and functional. The sequence of work on the construction of the canopy includes the following stages.
Prepare the base. Dig 2 holes to a depth of 1 meter. In which you will subsequently install support pillars. Pour sand mixed with crushed stone at the bottom of the hole and compact the holes. It is advisable to make them square, 40x50 in size. If used for foundation screw piles, then their immersion into the ground should be no less than 1200 mm.
Use a tape measure to mark the wall where the frame will be attached. For correct marking, use a level in your work. Consider the height of the structure so that the person tall could fit under the canopy freely or climb the steps of the porch without obstacles.
Install the frame, connecting the pillars by welding, and sand the welding areas. Cover the metal with a layer of primer to prevent corrosion, paint in desired color. They usually look very practical metal racks black color.
Install supports, fill around the circumference concrete mortar, leave until completely dry. Attach the second part of the frame to the wall on anchor bolts or other fasteners, depending on the wall material used.
Install the sheathing, straight or in the form of an arch, then polycarbonate sheets will be attached to it. When installing arched sheathing, you will need to bend metal pipes to fit its shape.
Attach the polycarbonate to the frame by drilling holes in the metal frame with a diameter slightly larger than the screws. Then connect the frame to the polycarbonate sheet and screw the self-tapping screws into the holes. Cover the fastening points with washers and plugs for greater tightness of the connections.
Attention ! Polycarbonate can expand greatly when heated. To avoid deformation, leave gaps of at least a few mm on all sides during installation. Cover the sides of the polycarbonate sheets with special profiles. This way, dust and debris will not clog into the cells.
Conclusion
Thanks to polycarbonate, you can turn your wildest design ideas into reality and install a porch canopy of any shape. Polymer material suitable for making arches and domes, which can be used to build original canopies closed type. A porch with a polycarbonate canopy will be wonderful decorative element the entire building.
If you want to make a canopy over the porch of a house without using welding, then the following video will help you with this
A canopy over the front door is used to protect the entrance from precipitation, sun and other natural factors. In addition, the canopy has a decorative function and serves to decorate the entrance to the house. Made with their own hands, it is a source of special pride for the owners. Can be made of metal, tiles, plastic, wood, corrugated sheets, polycarbonate or other materials. In this article we will look at a visor made of polycarbonate, its advantages, types and features.
Advantages
A visor made of this material has many advantages:
- polycarbonate is easy to install and has a low dead weight;
- it is durable and can be used in a wide temperature range;
- allows sunlight to pass through well - does not shade the area;
- shock-resistant - can withstand mechanical shock, including heavy hail;
- resistant to loads - withstands the weight of the snow mass;
- not flammable;
- easily tolerates bending, so it can take any shape;
- available in various color shades.
Did you know? Polycarbonate is used in the manufacture of eyeglass lenses. These lenses are 10 times stronger than any other and are also considered the safest.
Types of polycarbonate fabric
Let's look at the main types of polycarbonate fabric:
Polycarbonate sheets can also be transparent or opaque. Opaque sheets are used to create partitions, wall cladding, suspended ceilings, wall decorations. Mosaics made from polycarbonate stained glass windows look very beautiful. Polycarbonate sheets retain their color for a long time and are resistant to scratches and mechanical damage. Varieties of visor shapes
All canopies consist of a frame, supporting elements and covering. The frame and supports are made of metal. The covering is made of polycarbonate sheet.
Important! The width of the canopy must be at least 0.8 m, the length - 0.5 m or slightly more than the width of the front door.
The shape of the visors is as follows:
Important! If the length of the canopy exceeds 2 m, then the structure may fall, so additional pillars are placed under the central support.
Frame
Most often the frame is made of aluminum or steel. Aluminum is an easy-to-work, flexible material. Not subject to corrosion. Before installation, it is varnished to provide protection from environmental influences.
A frame made of wood is usually used for canopies made of the same material. This is due to the fact that wood is not plastic and is susceptible to aggressive external environment. In addition, the tree is short-lived.
The forged metal frame looks best. Can be done in any decorative form and decorated with ornaments. Great for decorating front door, and the wall around it. Did you know? Door canopies were the first to be used in Chinese architecture. And the ancestor of the canopy can be considered a pagoda, in which each tier is decorated with a canopy roof.
How to install a visor
To install the visor, you will need the following tools:
- welding machine;
- Bulgarian;
- regular drill + set of drills;
- hammer drill for installing the finished product;
- screwdriver with an attachment for self-tapping screws;
- paint brush for priming and painting the finished product.
Installation materials: - metal pipe for frame parts;
- polycarbonate for covering the visor;
- primer for metal;
- metal paint;
- decorative screws;
- fasteners for the finished product.
The order of work is as follows:
- Marking work. We determine the shape and dimensions of the future canopy. If you order the production of a forged or aluminum frame, then you will have to determine the dimensions of the future product at the stage of ordering the frame.
- Pipe cutting. If you make the frame yourself, we cut it metal pipe required sizes. Remember that when cutting a pipe, you should make an additional allowance for the length of the pipe for bending. We bend the cut pipe into the shapes we need.
- We connect the frame parts by welding.
- We cut the polycarbonate sheet into pieces of the required sizes and shapes.
- Wall mounting. We prime the metal and paint it the desired color. Further work carry out after the paint has completely dried. We fasten the frame with anchors. Using self-tapping screws, we attach the polycarbonate coating to the frame.
Video: how to make a polycarbonate visor
Advantages of canopies:
- Weather protection. The presence of a canopy guarantees a long service life of the porch, the material of which is especially susceptible to destruction.
- The correct design of the canopy allows you to diffuse the light over the porch in the way you need.
- The presence of a canopy gives the porch completeness and a more aesthetic appearance.
The canopy material can be different - metal, glass, ondulin, slate or wood. But the most optimal and stable will be polycarbonate. Other materials, when exposed to precipitation, quickly become unusable and require frequent repairs.
In addition, polycarbonate, due to its transparency, allows Sun rays through itself, helping to dry out the porch after rains. This material is resistant to mechanical damage, which glass, for example, cannot distinguish itself from.
An important fact is that polycarbonate does not support combustion. Its flexibility allows you to make the visor not only flat, but also arched. Heat and cold air do not pass through polycarbonate.
From the aesthetic side, there is a huge advantage of the material, since its color range is huge. Multi-colored polycarbonate does not fade over time.
Types of polycarbonate canopies:
Making a canopy:
First, the shape of the visor is selected. If the canopy is planned to be arched, then it is worth remembering that polycarbonate can bend up to a radius of 0.7 m. With a smaller radius, the polycarbonate sheet will break in half.
The canopy is installed in the summer or in a warm room.
Polycarbonate is cut with a grinder saw or hand saw, its edges do not crumble, but are difficult to mechanically influence. The sheets are attached to the frame using self-tapping screws with rubber linings.
The ideal installation option is the simultaneous construction of the house and the canopy, since the right wall you can insert fasteners for the canopy.
If the house is old, then eyelets will be required for fastening, metal corner or a support beam that is located above the entrance.
It is better to take pipes for the frame with a rectangular section of 2*2 cm. They are either welded together or connected with aluminum rivets.
To give the required bend to the polycarbonate, cuts are made in it every 4-5 cm, calmly bending it to the desired arc.
For reliability, support pillars must be concreted into the ground. The concrete takes about three days to set, so until this time the canopy is not installed on the supports.
The lower parts of the pillars must be protected with anti-corrosion coating and waterproofing.
Price for polycarbonate canopies over the entrance to a private house
Polycarbonate visors are very common, so you can find them in major cities It won't be difficult for Russia.
Online stores sell visors from 3,500 rubles to 35,000 rubles. Of course, it all depends on the size and shape.
Someone sets not the price for a specific canopy, but the cost of work per square meter.
It is worth remembering that the final cost of a polycarbonate canopy includes consumables, manufacturing, delivery, installation services.
Closed canopies over the porch - photo gallery
An enclosed canopy is a single roof over a porch. It does not allow moisture and snow to pass through, protecting the entrance to the house.
The material and design for canopies can be very different.
Material:
Types of structures:
Canopy supports come in the form of pillars or brackets on the wall of the house. The first ones can be placed directly on the porch, attaching them with special anchors, or they can be cemented with a sand and gravel cushion.
Wood supports are the lightest and most beautiful; you can make real works of art from them by cutting them. But such material must be subject to antiseptic and fire protection treatment.
Brackets are the most popular mounting option. They are usually made from profiled pipes.
Most beautiful view supports are forged brackets and pillars. Their appearance gives the canopy a special flavor.
How to make a polycarbonate canopy over a porch with your own hands - photo, price for polycarbonate canopies over the entrance a private house, closed canopies over the porch - photo gallery
Types of canopies over the porch and entrance: advantages and procedure for DIY construction DIY polycarbonate canopy: what does a beginner need to know? How to make a canopy with a canopy over the porch with your own hands A do-it-yourself polycarbonate canopy is easy! DIY canopies over the porch Types of canopies over the porch of a private house Polycarbonate fastening: thermal washers, profiles, truss for a polycarbonate canopy - calculation, how to make a polycarbonate roof with your own hands - video, photo How to make a carport from various materials with your own hands
The visor is important element decoration of the porch, completing it appearance, but most importantly, it provides much-needed protection from bad weather. Let's look at how to choose it, what to pay attention to, and finally, how to make a canopy over the porch with your own hands.
Main functions of the canopy over the door
- Defence from negative impact precipitation and ultraviolet radiation of doors and porches.
- An opportunity for a person to hide from snow and rain in order to calmly open or close the door.
- Aesthetic appeal and completeness of the facade.
Requirements for canopies and awnings
In order for the visor to serve for more than one season and adequately perform its functions, it must meet the following requirements:
- The frame and material must withstand the weight of snow and ice.
- The material must be durable and resistant to adverse weather conditions
- It is a good idea to equip the canopy with a water drainage system using gutters.
- It is important to protect not only the front door, but also the porch with a canopy.
- The appearance of the canopy must fit into the overall interior of the building.
Types of canopies over the porch
A canopy over the porch can be made with your own hands in a fairly short time. The main thing is to calculate your strength and choose a frame shape that is easy to make yourself. Distinguish the following types visors:
1. Single-pitch canopy. Most affordable option, is a structure made at an angle for unimpeded drainage of snow and water. A single-pitch canopy can be straight, concave or with a valance.
2. Gable canopy. Simple and reliable option with two inclined planes.
3. Arch. 
Visor with a semicircular design. It is easy to implement and has an attractive appearance.
4. Tent.
Other types of ball visor: awning and dome. Quite difficult to work with many curved parts.
Materials for the canopy over the porch and door
- The following materials can be used for the visor, each of which has its own advantages and disadvantages.
- Polycarbonate
- Transparency. The area under the canopy is not shaded, and damaging UV radiation is delayed.
- Fire resistance. The material meets high fire safety requirements.
- Resistance to biological damage, mold and corrosion. Flexibility. The material bends perfectly, allowing you to create visors of various shapes. High
- mechanical strength
- . Polycarbonate is resistant to loads created by snow and wind.
Ability to withstand a wide range of temperatures. Visual appeal and a wide choice from material thickness to color range. Note! For
external works
An excellent option for a canopy, which is comparable in popularity to polycarbonate due to the following positive properties:
double-sided polymer layer that protects against moisture and corrosion;
- ease of processing and installation;
- variety of colors;
- durability.
The disadvantages of the material include:
- lack of light transmittance;
- thin versions of corrugated sheeting are quite easy to damage and scratch, for example, during heavy hail;
- loud noise when it rains;
- rustic appearance.
Metal tiles
A canopy made of metal tiles is aesthetically pleasing and highly durable. Such a canopy looks especially organic in combination with the same roof of the building. In this case, the trim left over from the construction of the roof will be suitable for arranging the canopy.
The main advantages of metal tiles include:
- presentable appearance;
- long service life;
- high mechanical strength;
- light weight;
- resistance to critical temperatures.
The downside of metal tiles is that they generate a lot of noise during hail or rain. Instead of metal tiles you can use flexible or bitumen shingles– it has high aesthetic parameters and well muffles the sounds of precipitation.
Other canopy options
- PVC. Sheds are often made from PVC boards, specially designed for external use. The characteristics of PVC sheets are similar to polycarbonate, but PVC costs less than polycarbonate sheets and is lighter in weight.
- Steel. A good option would be a galvanized steel canopy that has corrosion protection. In other cases, treatment with primers will be required. Steel sheets strong and durable, the disadvantage is their heavy weight.
- Glass. Stylish and nice option. Tempered glass is a durable and reliable material for a visor. The cost of glass canopies is quite high and requires the involvement of specialists.
Materials used for the visor frame
- Metallic profile. Construction from round and square section durable and affordable. The frame is assembled using welding.
- Forged frame. Reliable, durable and very beautiful forged parts can serve as the basis for a frame and as additional decorative elements. Hand forging has a correspondingly expensive cost.
- Wooden base. If the house is made of logs or timber, a frame made of natural wood. As a coating, it is good to use materials similar to roofing sheeting: metal tiles, slate, flexible tiles, corrugated sheet. Polycarbonate or plastic in this case will not look very organic.
DIY canopy over the porch made of polycarbonate
Work on installing a canopy over the porch begins with the creation of a schematic drawing indicating the dimensions of the structure.
The diagram specifies the following parameters:
- canopy length;
- width;
- tilt angle;
Important! Visual appeal and a wide choice from material thickness to color range. best protection The porch and door canopy should be made with a margin of length and width. The angle of the roof slope should be designed so that snow and rain flow freely and do not linger on the canopy.
Required materials and tools:
- Polycarbonate panels;
- Metal profile for frame;
- Level;
- Bulgarian;
- Drill and screwdriver;
- Apparatus for welding work;
- Self-tapping screws with thermal washers.
Assembly and installation of the frame
- Marking the wall for space for supporting elements.
- Making a frame from a profile pipe.
- Welding frame parts.
- Welding additional elements for structural rigidity depending on the weight and length of the canopy.
- Fastening the frame to the facade.
- Treatment with anti-corrosion compounds and painting of the metal frame.
Polycarbonate fastening
- Cutting polycarbonate sheets to size using a grinder.
- The material is applied to assembled structure and is fixed on thermal washers.
- The joint between the wall and the canopy is sealed to prevent water from flowing down the wall onto the door and porch.
When attaching polycarbonate, the following nuances should be taken into account:
- A special tape is glued to the ends of the cellular polycarbonate sheet, ensuring the tightness of the internal voids of the material.
- Polycarbonate has a tendency to thermal expansion, so technological gaps should be left between the sheets during installation.
- For installation, specialized connecting profiles for polycarbonate are used.
- Installation is carried out without removing protective film. Once the panels are secured, they can be removed.
There are many options for arranging a canopy over the porch; the method using polycarbonate is the most affordable and can be easily done with your own hands.
Canopy over the porch - photo
That's all, we hope this article - a canopy over the porch with your own hands, was useful to you.
