How to clean an acrylic bathtub at home? Tips for washing with improvised and special products. How to clean an acrylic bathtub? What product cleans an acrylic bathtub well?
In addition to dirt and soap scum, plaque often forms on the bathroom. Its intensity and color depend on the quality of tap water. White limescale is caused by an increased concentration of hardness salts, rust is caused by excess iron, and yellowness is caused by the content of chlorine in tap water. The problem of plaque can be solved by proper and regular care using traditional methods or special household chemicals.
Traditional methods of removing dirt and plaque are popular everywhere - many home remedies can actually cope with the problem quickly and without additional financial costs. But it is worth noting that it is easy to remove limescale and yellow deposits using home methods. Rust is much more difficult to remove, and if it is old, you cannot do without household chemicals.
Homemade recipes for limescale
Liquid soap
A common option for everyday product care. Using a soft sponge, treat the bath with the product and rinse with water. This is enough to remove daily dirt and keep the surface clean. Wash acrylic bath You can also use washing gel or dish soap.
Vinegar
Table vinegar dissolves lime deposits well. Used alone or in combination with citric acid, salt or soda. The main thing is that in the case of acrylic, do not use it in its pure form. 0.5 - 1 liter of 9% vinegar is diluted in a bathtub filled with warm water. Leave for several hours (but no more than 12), after which the solution is drained, and the bath is wiped with a sponge, rinsed with water and wiped dry.
Lemon acid
Citric acid powder is used in a similar way to vinegar, but it must first be dissolved in warm water. For light whitening you will need 50 g of powder (this is 2 packs of 25 g each), for plaque removal - 100 - 200 g.
It is necessary to dissolve all the crystals so that they do not settle on the bottom of the bathtub. Freshly squeezed lemon juice applied to a sponge can be used to wipe off small yellowed areas.
Soda
Washing an acrylic bathtub with soda often causes controversy among professionals and on thematic forums. Baking soda effectively whitens and removes limescale, but as an abrasive substance it is of concern. In order not to harm the acrylic surface, you should soften the abrasive effect of soda: to do this, dissolve it in a bath of warm water and leave for 30 - 60 minutes. Then the solution is drained and the bath is rinsed with water. Another option: dilute baking soda with water to a paste-like consistency, apply for 15-20 minutes and rinse.
Folk remedies for yellowness
Laundry soap
A universal cleaner for cleaning all surfaces. Using laundry soap, you can prepare a cleaning gel that effectively removes stubborn dirt and whitens yellowed areas. To do this, grate the soap and dilute it with warm water to a thick, uniform consistency. Add 1 - 2 tbsp. l. soda and mix well until it dissolves, apply with a sponge. The exposure time of the product is from 15 to 60 minutes.
Soda and mustard
Combine soda and mustard powder in equal parts, add warm water and stir until the soda dissolves. The resulting slurry is used to treat rusty and yellow areas and leave for 30 to 60 minutes.
Vinegar and hydrogen peroxide
Vinegar and peroxide are mixed in a 3:1 ratio and applied with a sponge or spray bottle. After 15 minutes, wipe the treated area with a napkin and rinse with water.
Toothpaste
Whitening toothpaste can be used to clean an acrylic bathtub from yellow plaque and fresh traces of dyes (for example, such stains may remain after hair dyeing). Rub the paste into problem areas with your fingers or a sponge, leave to act for several minutes and rinse with water.
Recipes for rust
Salt and lemon juice (vinegar)
Finely ground salt is mixed with the juice of half a lemon or 2 tbsp. l. vinegar until you get a paste. The composition is applied to rusty spots and left for a period of 15 to 60 minutes. You cannot rub the surface with this composition - it is washed off, and the remaining rusty deposits are removed with a sponge.
Hydrogen peroxide and ammonia
A solution of equal parts peroxide and ammonia can remove limescale and fresh rust. The action time should not exceed 10 minutes: ammonia in ammonia can harm the acrylic surface.
Special means
Industrial products for acrylic are presented in the form of liquid sprays, creams or gels.
Compositions suitable for acrylic can be found among consumer household chemical products and from manufacturers of branded sanitary ware. Professional products can not only remove stains and old plaque, but also return the bathroom to its original color.
Industrial products active against plaque and dirt of various origins:
Note: It is advisable to test any new product on a small area before use.
How not to handle acrylic
Acrylic is a durable polymer material and a bathtub made from it will last a long time if mechanical and chemical damage to the surface is avoided, namely:
- Do not use aggressive cleaning agents based on chlorine, concentrated acids and strong alkalis (Domestos, Belizna, Pemolux). Due to chlorine, the bathtub may turn yellow, and caustic substances can destroy the acrylic layer and cause cracks.
- Do not use hard brushes or metal scrapers for cleaning - they easily scratch acrylic. Polymers are characterized by a non-porous surface, so when proper care There is nowhere for dirt to accumulate and there is no need for rough cleaning. But when defects appear, dirt easily gets into the damaged areas.
How to remove scratches
If scratches do appear on the bathroom, they can and should be eliminated to avoid further damage to the material. Cracks, chips and defects that form when the surface is corroded by aggressive substances also require restoration.
Acrylic bathtubs are easy to restore, so minor defects can be removed at home. Scratches can be removed fairly quickly:
- the damaged areas are carefully sanded with sandpaper of different grain sizes (from coarse to fine);
- A special polishing compound is applied to the cleaned area and treated with a fleece or special cloth in accordance with the instructions.
Note: Small scratches can be removed with a special polishing pencil for acrylic surfaces.
Serious defects can be eliminated using putty, liquid acrylic and polish. Often such work is entrusted to professionals, but if you wish, you can do it yourself in several stages:
- Use masking tape to separate defects from undamaged areas;
- cracks and chips are sealed with starting putty;
- after the putty layer has dried, the damaged areas are rubbed first with coarse-grained sandpaper, then with fine-grained sandpaper;
- if small irregularities remain, add a layer finishing putty and after it dries, sand the surface again with fine-grained sandpaper;
- delete masking tape and degrease the surface with alcohol;
- after all layers of putty have completely dried, a special paint is applied to the treated areas (its color is selected in accordance with the shade of the bathtub);
- Finally, polish is applied to the dried layer of paint.
For convenience, you can purchase a repair kit for acrylic bathtubs. The standard kit includes polish, a set of sandpaper of different grits and polishing cloth.
Step by step how to remove scratches is described in the video below:
Cleaning your hot tub
If hydromassage equipment is installed in the bathroom, weekly cleaning of the nozzles and regular disinfection of the system will be required. When soap suds, dirt and organic compounds get into the hoses, they begin to decompose and cause bad smell. When water circulates in the system, this dirt ends up in a common tank, which makes the bathing procedure unhygienic.
To fix the problem yourself, you can purchase special disinfectants for hot tubs. The bath is filled with warm water, an antiseptic is added and the hydromassage is started for 10 - 15 minutes. Then the water is drained and the bath is thoroughly washed to remove any remaining disinfectant.
Antibacterial solution Ravak Disinfectant for plumbing and hydromassage systems. Note: Chrome whirlpool jets can only be cleaned with cleaning products. chrome surfaces. This should be taken into account when choosing a bath detergent. Otherwise, the chrome elements may darken or become stained.
At least once a year, it is advisable to contact specialists who will carry out professional disinfection and cleaning of the hydromassage unit - including the filter and water supply system.
Bathroom care
Caring for an acrylic bathtub comes down to preventing persistent contamination and, as in the case of cleaning, not damaging it. surface layer. To do this, it is important to observe the following preventive measures:
- Monitor the serviceability of taps, shower hoses and mixers: leaking plumbing is the main cause of rusty streams.
- Pay attention to the composition of cleaning products for faucets and shower heads that are mounted above the bathtub container or fixed above its surface. Drops of detergent will certainly fall on the surface of the bathtub and leave stains on it or cause damage to the acrylic layer if active substance turns out to be aggressive.
- Do not exceed the exposure time of cleaning agents: after a long time, even acrylic-safe compositions can form undesirable reactions. Their most harmless consequences can be stains and discolored areas on the surface of the bathroom.
- Do not wash or soak laundry in acrylic bathtubs, especially in bleach solutions. Colored clothes may stain the container when washed.
- Avoid hitting the surface of the bathtub or dropping heavy objects on it.
- Do not place basins or other containers with hard bottoms or sharp edges in the bathtub.
- Do not burn the acrylic surface with curling irons or curling irons.
- Be careful when bathing animals: their claws can scratch the acrylic layer. Therefore, it is better to organize another place for this procedure or lay a rubber mat on the bottom of the bathroom.
- Do not pour into the bath bowl hot water, especially boiling water - it destroys acrylic, and the thin coating of a low-quality product can even melt. Safe water temperature for cast acrylic bathtubs is up to 80°C, for sandwich structures – from 50 to 70°C (depending on the thickness of the acrylic layer).
- To restore the antibacterial properties of the acrylic coating, periodically disinfect the bathtub with special solutions.
Ideally, it is recommended to wash your acrylic bathtub daily with liquid soap and be sure to wipe the surface dry after each use. But with the modern rhythm of life, it is quite difficult to implement this in practice. Therefore, it is advisable to wipe the bathtub at least once at night and clean it with a suitable product once or twice a week. Additional use of polishes will reduce the frequency of washing the acrylic bath and prolong the effect of the shiny surface.
Advice! If you need bathroom renovation specialists, there is a very convenient service for selecting specialists from. Just fill out the order details, the specialists will respond themselves and you can choose who to cooperate with. Each specialist in the system has a rating, reviews and examples of work, which will help with the choice. Looks like a mini tender. Placing an application is FREE and does not oblige you to anything. Works in almost all cities of Russia.
If you are a master, then go to, register in the system and you will be able to accept orders.
Acrylic bathtubs are rapidly replacing high-quality cast iron bathtubs on the global market. And there are reasons for this: they are lighter, easier to install, and look more aesthetically pleasing.
Acrylic does not rust, it is not affected by fungus and other various bacteria. All this makes plumbing maintenance simple and quick. The article will tell you how to clean an acrylic bathtub at home.
How often should the stain removal procedure be carried out?
Acrylic is a rather unpretentious material. Plumbing fixtures made from it are slippery and smooth, so the surface for a long time does not get dirty. Manufacturers recommend rinsing acrylic bathtubs regularly, after each water treatment.
It only takes a minute, but it prevents stubborn marks from appearing and you don't have to worry about how to clean. snow-white surface. “General” cleaning using cleaning products must be carried out at least once every 2 weeks.
What should you avoid when cleaning an acrylic bathtub?
Before washing an acrylic bathtub at home, it is recommended that you familiarize yourself with the list of “contraindications”. Things made from this type of plastic usually have a shiny, glossy surface. 
Therefore, the operation is strictly limited:
- Typical powdered products, such as Domestos, Comet, etc.
- Brushes with stiff bristles, steel wool.
These materials easily damage the bathtub, leaving deep scratches. Use only the soft side of a sponge or washcloth, or cloth wipes.
The use of any aggressive solvents is not recommended:
- Bleach and similar chlorine-containing products;
- Acetone;
- Ammonia;
- Formaldehyde.
Acrylic, like most types of plastic, is very sensitive to solvents, which can “corrode” its surface. In this case, the surface of the bath will lose its shine, terrible stains and small cracks will appear.
Bathtubs made of acrylic, due to their excellent physical parameters and wide price range, are in wide demand among consumers. But unlike enameled metals, acrylic is more demanding in terms of care products. After purchase, any user is faced with the question of how to clean an acrylic bathtub at home, because if it is not properly maintained, the coating can be irreversibly damaged and the product will have to be disposed of.
When choosing a cleaning product for acrylic bathtubs (liners), consider chemicals sold in the retail chain specifically for care purposes or used in everyday life. It is useful for the user to know the methods and reagents used to clean bathtubs from various contaminants: rust, hardness salts, dyes, silicone sealants.
Synthetic acrylic, like other popular polymers ( polyvinyl chloride PVC, polyethylene PE) is characterized by the fact that there are some chemicals that affect it negative impact. Therefore, you should know which materials and components should be completely excluded when caring for an acrylic bathtub. This list includes:
Abrasive substances. Cleaning acrylic bowls with household chemicals containing small particles of abrasives (Pemolux powder, caustic and baking soda in dry form) leads to scratches on their surface, resulting in loss of shine and aesthetic appearance - the glossy bowl becomes matte. In addition, a rough surface after using abrasive materials absorbs dirt much better and is more difficult to clean in the future. You should not rub the acrylic bathtub with hard synthetic brushes - they increase the roughness of the walls and make it difficult to further care.
IN Lately In everyday life, the Chinese melamine sponge, which works on the principle of an eraser that erases any dirt, is very popular among housewives. Since the hard fibers of melamine have an abrasive effect on materials, acrylic bathtubs should not be cleaned with a sponge.
Household chemicals. Some popular household cleaning products for sanitary appliances (Santex, Sanfor) or bleaches (Belizna, bleach) contain chlorine, which has a mild Negative influence on acrylic coating, causing the gloss to fade. Due to the low concentration of aggressive chlorine and the short exposure time, the use of these compositions does not cause too noticeable damage, but it significantly exceeds the benefit from the use of chlorine-containing components.
Clean acrylic is not damaged by commonly used household products such as gasoline, ammonia, alkalis, sealant, and silicone lubricants, but it is better to avoid contact of these substances with the bathtub, since there is not always a guarantee of purchasing a high-quality bowl.
Acrylic dissolving substances. Technical acetone, popular in everyday life, when it comes into contact with the gloss of the bowl, partially dissolves the acrylic with the formation of a cloudy coating on the surface; with prolonged exposure, it gradually dissolves the polymer. Acrylic can be damaged by high concentrations of hydrofluoric acid, hydrocyanic acid, nitric acid, chromic acid and sulfuric acid; the damage depends on the time of contact of the materials.
The worst enemies of sanitary acrylic are its solvents: ketones, chlorinated hydrocarbons (chloroform, methylene chloride, dichloroethane), esters and aldehydes, alcohols (methyl, propyl, butyl, ethyl). Excellent dissolution of acrylic adhesive for PVC CosmoFen containing vinyl chloride polymers.
Household chemicals
The retail chain sells a wide range of products for the care of acrylic surfaces, their distinctive feature— Acrylic inscription on bottles or containers. Consumers are well aware of such brands as Bass, Sif, Zolushka, Chister, Ravak, Akrilan, Sanox, Silit, Tim-Profi, produced in the form of gels, pastes or spray liquids.
The packaging of each composition contains instructions for use; the standard cleaning method is to apply (spray) onto the bowl and wash off the deposits with warm water after some time. Most popular gels are squeezed onto a rag (sponge), spread over a bowl, left for 15 minutes, and removed with hot water, then wiped dry.
Folk remedies for cleaning acrylic baths
Due to the low cost, availability and wide range of household chemicals, the use of traditional methods for cleaning baths is not as relevant as in the days when acrylic plumbing first entered the retail chain. However, the desire to outstrip industrial chemicals in efficiency or save money by using cheap homemade components still haunts many owners. Thanks to their ingenuity, the following methods for cleaning acrylic bathtubs with household substances are recommended:
Lemon acid. Used for cleaning painted bowls from hardness salts and yellowness clearly visible on their surface. To use citric acid, a bag of powder is diluted in approximately 0.5 liters of water, the prepared solution is poured into a household spray bottle and the surface of the bowl is moistened with the liquid in places where plaque appears. The operation is repeated several times, upon completion of the procedure citric acid wash off with hot water from the shower head.
Soda and vinegar. This combination is a universal household method for cleaning any surfaces, from metal utensils, frying pans, gas and electric stoves, sewer pipes, and ending with plumbing equipment. To eliminate rust stains or other dyes, pour baking soda onto the area to be cleaned and spray with 9% vinegar essence from a household spray bottle. At the end of the cleaning work, the plaque is washed off with hot water.
Toothpaste. You can use toothpaste (not gel) to remove rust marks from an acrylic bowl by applying it to an old toothbrush and rubbing it into the stain. If the entire bathtub has lost its shine, you can return it to its original state by rubbing the paste over the entire surface; to do this, apply it to a cloth and rub it into the bowl for a certain time. In this case, the paste plays the role of a component that erases microscopic irregularities, which is used when polishing various materials.
Salt and vinegar. To prepare the cleaning composition, add 25 mg of table salt to 100 ml of vinegar, stir until completely dissolved and heat to a temperature of 60 °C. The solution is sprayed onto dirty areas with a spray bottle and rubbed in with a soft cloth or sponge; upon completion of work, the composition is washed off with hot water.
Soda and soap. Soda is poured into soapy water, the resulting solution is applied to contaminated areas after 20 minutes. The composition is washed off with hot water.
A mixture of ammonia and hydrogen peroxide. The liquids are mixed in a ratio of 2:1 (50 g of hydrogen peroxide is poured into 100 g of ammonia), after which a sponge and napkin are moistened with the solution and the acrylic bowl is wiped in contaminated areas. Typically, rust stains are removed in this way, and due to the fact that strong chemical components are used, it is necessary to work with rubber gloves. It should be noted that this method is the most effective among other home methods and is often recommended on the Internet.
Review of popular bath cleaners
To combat various types against pollution, it is safer and more effective to use household chemicals sold in retail chains - they allow you to get a more pronounced effect than homemade solutions. The vast majority of products sold are designed to simultaneously get rid of traces of rust and limescale, so it is quite difficult to find a cleaning product for acrylic bathtubs that removes only one of the listed contaminants.
The following brands are in good demand on the market for eliminating rust stains and hardness salts and have proven themselves to be excellent:
Bagi Acrilan— products of the Israeli brand Bagi are always highly effective in comparison with analogues, and accordingly the cost of Bagi is higher. Acrilan is supplied in plastic container with a spray bottle, when cleaning it is sprayed in the form of thick foam - this allows the composition to adhere well to smooth vertical walls. Due to its high aggressiveness, cleaning time takes no more than a minute; it is not necessary to use a sponge or cloth when working.
In addition to lime and rust stains, foam decomposes dirt, soap stains, old stains, fungus and mold, renews the surface and gives it gloss, and prevents further contamination. Bagi Acrilan contains surfactants, organic acids, stabilizers, solvents, 400 ml bottles are enough for 25 cleanings, the price of foam is from 350 rubles.
Meine Liebe is a German trade brand, its composition includes nonionic surfactants, sulfamic and phosphoric acids, trisodium alaninate. The drug is applied through a sprayer and forms foam on top, dissolves lime, rust stains, soap stains and dirt, after exposure to the acrylic a film is formed that stops subsequent contamination. It has a delicate effect on the surface and is easily washed off with water; immediately after using Meine Liebe, the child is allowed to bathe. The cost of a 500 ml container of the drug is from 200 rubles.
Unicum spray— characterized by a high concentration of surfactants, which contributes to the economical consumption of the spray, removes hardness salts, fungus, mold, rust stains, and traces of soap. After application, it is washed off well; the nanolayer formed during spraying further prevents contamination. The cost of a container with a volume of 750 ml is from 300 rubles.
Sanfor Acrylight— designed for treating Jacuzzis with hydromassage, steam cleaners, shower cabins, effectively removes old dirt, traces of soap and hardness salts. After use, it creates a protective film that gives the surface gloss and facilitates further maintenance. Supplied in the form of a gel or spray foam, the cost of a 920 g container with gel is 120 rubles.
Cif cream Active- a popular domestically produced cleaner for cleaning any surfaces from lime and traces of rust; microgranules in the composition allow you to cope with any difficult stains. The cost of 500 ml of cream does not exceed 100 rubles.
Cillit Bang— the main component of the composition is hydrochloric acid; the Cillit line includes universal reagents suitable for cleaning acrylic bathtubs. They cope well with hardness salts, rust, stubborn dirt, and stains. The cost of a 750 ml container of Cillit bang spray starts from 300 rubles, cheaper analogues are available for sale, 500 ml from 140 rubles.
Comet— the line of well-advertised products recently added the universal Expert spray, designed to clean acrylic from lime and rust and has antibacterial properties. Comet contains phosphoric and formic acids; the entire line has different scents with a predominance of lemon, so in addition to cleansing, Comet effectively eliminates odors. The cost of a 500 ml container is from 140 rubles.
Chistin Sanitary— the composition of the domestic budgetary funds includes a mixture of acids of organic and inorganic origin. Chistin effectively removes rust stains and hardness salt deposits, has antibacterial properties and fights odors. A container with a volume of 500 ml can be purchased for 50 rubles, while Sanitary Chistin is not much inferior to its more expensive and advertised analogues.
The widely advertised Domestos gel for working under the toilet rim is popular among consumers; many of its owners ask the question: is it possible to wash an acrylic bathtub with Domestos?
As can be seen from the above list of the best rated products for maintaining acrylic containers, Domestos is not included in it and this is due to the presence of sodium hypochlorite in its composition, which is a strong oxidizing agent. Hypochlorite itself consists of 95.2% active chlorine, which is harmful to acrylic, so Domestos is contraindicated for acrylic bowls due to the high probability of damage to their surface during prolonged exposure.
Sometimes when carrying out repair work gets on the bowl, for which chemical reagents are better suited to remove - white spirit and acetone. In order not to take risks, it is safer to avoid chemicals when eliminating silicone - it is easily separated from the acrylic surface mechanically if you use any non-solid object for this purpose - a wooden or plastic plate, a rough cloth.
The plastic of an acrylic bowl is softer and therefore more susceptible to mechanical stress; acrylic is also afraid of contact with some chemical reagents in which it dissolves. These factors influence the care of an acrylic bathtub at home and the rules for its operation. Many users may find the following tips helpful:
- After washing, the bathtub is rinsed and wiped with a dry cloth - this prevents drips when water droplets dry.
- Every week, it is recommended to thoroughly sanitize the bowl and surrounding walls using an acrylic bathtub cleaner. You can wash the bathtub with any dishwashing liquid like Fairy or a soapy sponge, then wipe it dry.
- Once every six months the bowl should be disinfected; to do this, fill it with water and add a disinfectant composition (Ravak, Tim Profi), and let the water stand for 20 minutes. and then drained.
- Acrylic is easy to scratch, so it is not recommended to place basins or metal buckets in the bathtub.
- When bathing pets (dogs, cats), you should avoid contact of their claws with the bowl.
- For noticeable scratches and persistent stains that cannot be eliminated with chemicals, the damaged area is cleaned with fine sandpaper and then polished using special materials and pastes. Since polishing work requires professional skills, knowledge of technology and the availability of special devices (materials), it is better to entrust such operations to a specialist.
- For a long time operational life inner surface acrylic bathtubs lose their gloss and become matte, while they get dirty faster and more intensively, they are more difficult to care for, and the procedure causes increased consumption of cleaning gels and sprays. In this situation, you should think about polishing the entire surface of the bowl - this will improve the appearance, extend the service life and reduce the consumption of materials for cleaning.
Unicum - instructions for use
When deciding what to use to wash an acrylic bathtub at home, they opt for traditional cleaning methods or household chemicals, a wide range of which are sold in the retail chain. Of the self-made reagents, the most effective is considered to be a mixture of ammonia and hydropyrite, recommended on many Internet portals.
Expensive and advertised cleaning compositions do not always match their price in quality; good results can be achieved using domestic budget preparations (Cinderella, Chistin Sanitarny), the cost of which is several times lower than their well-known analogues.
Very convenient and practical. But, like any other household item, they need daily care. Any housewife who owns this simple piece of sanitary equipment has at least once wondered “the inside of an acrylic bathtub and how often to wash it at home?” We will try to help and answer this seemingly simple, but very important question.
Daily care of an acrylic bathtub
Acrylic came to the plumbing industry from dentistry. There it was widely used for lining metal frames of dentures and making full-fledged crowns. Being a durable and wear-resistant material, acrylic easily competed with steel and cast iron in manufacturing plumbing equipment(shower trays and bathtubs).
In order not to resort to radical cleaning methods, do not allow the acrylic bath to become heavily soiled Acrylic is a fairly demanding material. Although it is shock-resistant, small scratches easily appear on it, which subsequently darken and greatly spoil the appearance of the bathtub. In order to avoid the appearance of microcracks and scratches, it is necessary to observe some precautions during the daily use of an acrylic bathtub:
Advice! To keep your bathtub sparkling white, you need to provide it with daily care. Avoid heavy contamination. Complex limescale masses are much more difficult to get rid of.
For those who daily wonder how to clean an acrylic bathtub at home, let us tell you what the best remedy from the formation of stains and plaques - prevention. It is enough to rinse the bathtub with a clean stream after each use. running water, better effect can be achieved using a soft soapy sponge. And after washing, wipe dry to avoid drying drops of hard water on the surface of the acrylic.
Heavy soiling: radical cleaning methods
Even with the most careful care it is impossible to avoid serious contamination. This can happen either due to the owner’s negligence or under the influence of hardness salts contained in water masses. Also a dangerous enemy for acrylic is rust formed on damaged parts of the faucet, pipes or other metal elements. Acrylic absorbs the substance and it is not possible to remove it with a regular brush.
On the bathroom, as well as on the faucets, it will appear over time. limescale For stains from rust or other contaminants, you can use special acrylic cleaners. But their effect will only be effective on a fresh stain. In addition, chemicals should be used very carefully and diluted with plenty of water. Otherwise, concentrated chemicals can cause even more harm. As for limescale, cleaning acrylic from it is also done using special chemicals.
Important! The surface treated with chemicals must be washed as soon as possible. Left for a long time, it is absorbed into the acrylic structure, destroying it and forming even larger stains.
Old stains from rust or limescale cannot be removed by any means. chemical agent. More radical cleaning methods are used here. To do this, you need to stock up on soft sandpaper and carefully clean the stain with it. After this, the stripping area is treated with acrylic polish. This method is best left to a warranty service technician or licensed technician.
Cleaning the hydromassage jets of an acrylic bathtub
The range of acrylic bathtubs is not limited to traditional products. There is a wide range of more expensive and considered elite in their category - hot tubs. The difference lies in the equipment regular product nozzles into which, using circulation pump a directed flow of water is supplied.
It is important to clean your hot tub regularly to prevent damage to the jets. If the hydromassage function is not used regularly, the following may form on the nozzles:
- limescale;
- mold;
- fungus;
- pathogenic bacteria.
To clean such a bathtub, a number of measures must be taken.
At the final stage pure water rinses all the pipes from the detergent and the bath is ready for use.
Important! Do not use bleach or other chlorine-containing products as a disinfectant. This is especially true for hot tubs. They not only damage acrylic, but also instantly destroy silicone and rubber seals.
Substances incompatible with acrylic
Acrylic bathtubs are absolutely not protected from aggressive substances, so there is a large list of cleaning products, the use of which is strictly prohibited. Some of them remove the glossy shine from the acrylic surface, while others completely destroy it.
Never use harsh chemicals to clean your acrylic bathtub. Such substances include:
- products containing fine abrasives;
- chlorine;
- acetone;
- ammonia;
- formaldehyde.
Everything is clear with abrasives - they damage the surface of acrylic, forming small scratches on it. The fight against which will cost some costs physical strength and financial investment. Small cracks and scratches are rubbed with special polishes, and deeper ones are sanded using soft sandpaper or a grinder, in special cases, made specifically for repair work.
Purchase special cleaning products for acrylic bathtubs The decision to disinfect with chlorine can lead not only to dulling of the material and loss of shine, but also to the formation of small roughness on the acrylic (destruction process). Acetone and other solvents, like ammonia, can also cause the bathtub to lose its gloss. But this is not the worst thing. Prolonged exposure of acrylic to solvent will certainly lead to corrosion of the material and the formation of dilapidated areas.
It should always be remembered that the use chemicals for an acrylic bathtub it is allowed no more than 1-2 times a month when completely disinfecting the bathroom. On other days, it is best to resort to routine cleaning and use the least aggressive preparations: soap, soft cloth or sponge.
Cleaning products made from scrap materials
Not everyone trusts chemical cleaning products. In some cases, they can lead to detrimental consequences for acrylic. Sometimes the cost of products is beyond the buyer's means. Or the user is allergic to chemicals. In such cases, the cleaning agent can be prepared according to folk recipes, using available products, most of which are in the kitchen of any housewife.
There are many more ways to clean acrylic from stains, but the best of them is prevention. Avoid plaque deposits. Rinse your bathtub every time after use and your bathtub will remain sparkling clean for years to come.
Acrylic bathtub care: video
Over time, the appearance of yellowish streaks on their surface is inevitable. It's all the private's fault tap water. The impurities of chlorine and heavy metals it contains have a detrimental effect even on high-tech products. Therefore, periodic removal of yellowness will not only restore a hygienic appearance, but will also significantly increase the service life of plumbing fixtures.
Bathroom cleanliness
The desire to use household chemicals from recognizable brands often does not meet consumer expectations.
Moreover, such products contain a high concentration of brutal chemical compounds, the incorrect use of which leads to irreversible damage to the top coating. A worthy candidate for commercial cleaning products are household items at hand.
Available in every home, they deal with the problem of yellowish streaks on the surface of the bathtub and toilet just as professionally. The most popular, capable of quickly and perfectly eliminating yellowness, are citric acid, baking soda and vinegar.
In other options, ammonia is the auxiliary component.
Important! In order to avoid the brutal effect of the components on the skin of the hands, when using both chemical and folk remedies, you need to work with gloves.
Cleaning products
Baking soda is considered the most common cleaning agent. With a small degree of damage to the surface, using a soft lip, it is useful to rub a sufficient amount of the substance and leave for 50-60 minutes. Then rinse with warm water. In case of old yellowish stains, ammonia is added to it. Having mixed both components until a viscous mass is formed, the latter is applied to the yellowed area for 30 minutes. After time, the consistency is rinsed with water.
The soda effect will be noticeable after the first application. In this case, damage to the enamel is completely eliminated.
Vinegar is no less effective at combating the problem of yellowish streaks. In addition to cleaning, he owns a massive antiseptic. property. All you need to do is apply it to the surface of the plumbing and leave for 1 hour. Its inherent pungent odor will evenly dissipate after rinsing with water. In addition to vinegar, you can use paper napkins pre-soaked in it.
So, covering the bathtub or toilet with them an hour after flushing, the absence of contamination is guaranteed.
Citric acid can have a similar effect, which can be consumed in the following way. Two 100 gram packs of citric acid are added to the hot water previously collected in the bathroom. The solution is left in this state overnight.
In the morning, the final step of the cleaning procedure is carried out using the usual method, specifically using sponges. It is better if there are several of them, since this substance actively dissolves fat.
To ensure that the bathroom and toilet always remain clean and are not subject to mechanical damage, certain rules should be followed:
- Even if the degree of contamination is severe, only soft lips are used for plumbing. Hard brushes quickly damage the enamel, resulting in cracks.
- Sharp contrasting water temperatures should not be allowed. This has a detrimental effect on the enamel of plumbing fixtures.
- Avoid soaking laundry in the bathroom.
Washing powders corrode any bathroom coating.
All types of contaminants must be dealt with at the stage of their appearance. It is enough to pay proper attention to cleaning the plumbing fixtures once a week in order to forever forget about the problem of yellowish streaks.
Caring for an acrylic bathtub: how to maintain whiteness and get rid of dirt
A snow-white acrylic bathtub is a cheap and extremely attractive option that virtually everyone has considered when planning a renovation.
Acrylic plumbing looks excellent, is not subject to corrosion, but requires constant and extremely careful care.
If you follow all the tips for cleaning products made from this, even the most affordable acrylic bathtub will last a long time, maintaining its original external view.
Experienced housewives familiar with this confirm the usual, although difficult to follow rule: if you wipe the bathtub with warm water and a soft cloth after each use, you can reduce to a minimum the need for the use of household chemicals.
But maintaining a bathtub in impeccable condition is extremely difficult; you don’t always have the time and energy for daily cleaning.
When caring for an acrylic bathtub, you should keep a few basic rules in mind:
- acrylic is extremely sensitive to mechanical damage, the most common of which is scratches during cleaning. Therefore, the sponge you use for cleaning must not have an abrasive side. You can clean the bathtub only with a soft sponge or cloth. Modern plumbing made from acrylic, it is the least fragile, but some care should be taken;
- a bathtub made of extruded acrylic (the frame of similar plumbing fixtures is made of fiberglass, epoxy resins and others to give the bathtub rigidity) is more fragile than those made of cast acrylic, they must be handled with the utmost care (plus extruded acrylic compared to cast acrylic is a significantly lower price) ;
- in an acrylic bathroom you cannot soak laundry forever, this will spoil the appearance of the plumbing;
- Not all household chemicals are safe for acrylic.
Special cleaning products can be extremely expensive. If you cannot take them all the time, use folk remedies or products with a mild chemical composition. To choose the right way to clean an acrylic bathtub, carefully study the composition;
- Another prohibition is bathing pets, cleaning dishes and all objects with sharpened corners in the bathroom;
- You shouldn’t go too far and clean using household chemicals more often than once every two weeks, otherwise the surface will quickly lose its impeccable appearance due to frequent interaction with cleaning products.
All these inconveniences are an inevitable price to pay for the impeccable whiteness, resistance to corrosion and other advantages of acrylic.
Therefore, before buying, scroll through the question in your head daily care, if cleaned incorrectly, an acrylic bathtub will quickly lose its “sales appearance.”
As we have already noted, the sponge must be soft. With household chemicals suitable for acrylic, everything is a little more complicated:
- The label of special cleaning products will indicate that they are safe for acrylic plumbing. The downside of special household chemicals is the rather high cost. But in stores you can also look for relatively cheap domestic substitutes for imported products (300-500 rubles);
- Some general cleaning products can be used on acrylic plumbing fixtures.
But it is worth keeping in mind that the cleaning product does not have to contain harsh substances such as alcohol, acetone, ammonia, and acids. Products from the Chif, Bass and almost all other brands have proven themselves to be excellent; they can be easily purchased at your local store;
- a cheaper analogue is folk remedies. Light stains can be removed with ordinary laundry or baby soap and a soft cloth; a good choice is washing powder, well diluted in warm water. They also use lemon juice and wine vinegar - these remedies are excellent for yellowness;
- Another gentle procedure is to fill the bathtub with warm water, add a small amount of regular cleaning agent to it, then rinse and wipe the bathtub with a lip or rag;
- A more expensive but effective way is to occasionally order professional steam treatment.
This also allows you to disinfect the bath.
It is necessary to clean the bathroom frequently, once every two weeks, with a cleaning agent and, as necessary, without it. Also, once a year you need to disinfect the bath: add water, add special disinfectant, suitable for acrylic, stir well and leave for 10-15 minutes. Then the surface of the bathroom must be treated with clean, warm water and a soft cloth.
An alternative option is to add one and a half liters of citric acid (7%) to the filled bath, leave for 12 hours, then rinse well with warm water and wipe with a soft cloth. This method is extremely helpful in keeping your plumbing fixtures looking good and against limescale deposits caused by very hard water.
A separate problem is how to clean an acrylic whirlpool bathtub.
It is virtually unsolvable if powerful pollution has already arisen. It is much more effective to use preventive measures: before each bath, draw water and turn on the hydromassage for a couple of minutes. Once a month, the same function must be repeated, increasing the operating time of the hydromassage to 10-15 minutes and adding a cleaning agent to the water. Then the water is combined, and the “light” maintenance procedure is repeated without introducing a cleaning agent.
This is a fairly effective way to prevent contamination of the thin tubes of the hydromassage system.
If you have a small child who perceives water procedures in an ordinary bath, the question arises: how to clean an acrylic bath before bathing a baby. Folk remedies are better suited for this - ordinary soap and warm water, if the plumbing is in good condition and does not require severe reading.
Acrylic, with sufficient care, is completely safe for the baby.
There are several types of pollution that are difficult to deal with using ordinary means. This is primarily rust, limescale, scratches and stubborn stains. The strategy for keeping your home clean depends on the type and severity of the contamination.
- How to clean an acrylic bathtub from rust is a difficult question. Rusty stains cannot actually be removed from acrylic, so it is better to closely monitor the condition of the taps. If rust does occur, the quickest way is to carry out a serious repair - the stain is rubbed off with soft sandpaper, then treated with a special or ordinary polish.
The function should be carried out as carefully as possible, otherwise there is a risk of only aggravating the situation;
- Another problem is how to clean an acrylic bathtub from limescale. You need to apply a special product to the surface of the plumbing fixtures for 20 minutes (folk methods and cheap universal substitutes will most likely not be very effective), then rinse thoroughly with warm water;
- small scratches formed due to improper care or for other reasons can be wiped off in the same way as rust or heavy stains;
- If the condition of the plumbing requires severe cleaning (deep scratches or ingrained stains have appeared on the surface that cannot be removed by conventional methods), we use water-based acrylic or acrylic inserts to fill the damage.
The color must be extremely accurately matched to the color of the plumbing fixtures, and purchased at a specialty market; working with watery acrylic does not present any particular difficulty.
Caring for acrylic is not the most common task even for a completely neat housewife. But almost everyone believes that the perfect appearance of the plumbing that this gives is worth all the effort. The basic rule, which should be adhered to even before equipping the bathroom: cleaning must be constant, and the household chemicals used should be treated with the utmost care.
Copying and replication of website materials is prohibited.
How and with what to wash an acrylic bathtub
Acrylic bathtubs have a number of advantages, thanks to which they have taken a strong position in the plumbing market.
They are durable, lightweight, retain heat well and, with proper care, have a beautiful and discreet spring appearance. But it’s extremely gentle, so you can’t clean an acrylic bathtub with just any product. How to clean an acrylic bathtub so that it lasts a long time and looks like new? This question is worth asking immediately after the purchase, without waiting for the plumbing fixtures to turn yellow and become covered with rusty stains.
Read this article for us:
Household chemicals and acrylic
When choosing bath cleaning products, you need to carefully familiarize yourself with their composition.
- Abrasive (small solid particles found in powders);
- Chlorine;
- Acetone;
- Ammonia;
- Formaldehyde.
All these components scratch or corrode acrylic. And in small scratches and pores dirt and bacteria constantly accumulate. Naturally, you can reduce the damage to zero, but this requires complete polishing of the bathtub, which requires a lot of time and effort.
If you are unsure whether the cleaning product is suitable, use it on small area. A small area can be polished quickly enough with ordinary felt, microfiber or special wax.
Most sanitary ware care products have special markings that can help you determine if they are suitable for acrylic bathtubs.
Almost all well-known manufacturer release special series gentle cleaning gels or sprays. Such an assortment will not only remove old stains rust or limestone deposits, but will also deal with bacteria.
In the instructions for use, some manufacturers also list detergents and cleaning products that are recommended to be used to care for your bathroom at home. Pay attention to the full name of the cleaning product. For example, Sif contains chlorine, and Sif-cream is a product that should be used to wash an acrylic bathtub.
Daily Cleaning
There is no need to clean an acrylic bathtub from yellowness, plaque or mold if you wash it with warm water and a soft sponge after each use.
You can soap the bath after bathing with dishwashing detergent (making sure in advance that there are no contraindications), shampoo or watery soap.
Be sure to wash off the foam only with warm water, since extremely hot and cool water can have a bad effect on the integrity.
After you “wash” the bathtub, you need to carefully dry it, wiping and polishing it with a soft rag or felt.
Mechanical damage: scratches, cracks, holes
Small scratches (not deeper than a millimeter) can be removed immediately by polishing with felt or small sandpaper. As for the deepest cracks, it is worth using watery acrylic, then polished with the same felt.
This is one of the advantages of acrylic bathtubs - scratches can be removed extremely quickly and without a trace. And it is recommended to do this as soon as possible, because dirt begins to accumulate in the cracks, which is difficult to remove. Some cleaning products are poorly washed out and can remain in cracks, which in turn can lead to irritation on the skin after another water procedure, so before washing an acrylic bathtub with a strong product, it is worth polishing the most noticeable cracks. Rinse off the cleanser with copious amounts of warm water.
Periodically, as a preventative measure, you can completely polish the bathtub using special wax. This procedure will not only help get rid of scratches, but also give the acrylic a shine. But before the procedure, you need to use small sandpaper to go over particularly noticeable scratches. Do not overdo it, as acrylic is extremely easy to wipe, almost right through. Such damage is also not a problem in the presence of watery acrylic: the outer side is temporarily covered with electrical tape or tape, and the recess is evenly filled with acrylic.
Stubborn stains: rust, limescale
Some types of pollution are difficult to avoid. For example, rusty stains occur due to a loose tap or a leaking pipe, and limescale deposits are common in apartments with hard water. But all stains can be removed either with the help of special cleaning products, or traditional methods. For example, a mixture of lemon juice and vinegar in proportions of 1 to 1 will perfectly clean an acrylic bathtub from limescale and stubborn rust.
Simply wipe the stain with a soft sponge soaked in the substance.
This consistency is good not only for topical use. It can easily return the bathtub’s whiteness after the “soaking” procedure: a bathtub filled with water with the addition of a glass of vinegar and lemon juice is left to bleach for 12 hours. This “bleach” is carefully washed off with warm or cold water and polish the surface with a rag. Some recipes recommend increasing the dose of vinegar to 0.5 liters, but the method using such a consistency is considered quite solid, so it is better to start with the smallest doses and modify it by other means.
It is better to use this cleaning method no more than once every six months.
If for some reason you cannot fill the bathtub with water, then you can bleach it using ordinary napkins previously soaked in vinegar. Cover the entire surface of the bath with them and leave for 30 minutes, then remove the residue and wash with warm water.
How to clean an acrylic bathtub from various contaminants?
Home » Cleaning »
Acrylic bathtubs are now on sale more often than products made of cast iron or steel.
Light weight and relatively low cost make them popular among buyers. But at the same time, acrylic is quite capricious and requires painstaking and careful care.
Standard contaminants
Modern acrylic has dirt-repellent properties. But during active use by household members, sooner or later, the bathroom becomes “overgrown” with stains, its appearance and hygiene deteriorate significantly. That’s why many housewives are thinking about the question of how to clean an acrylic bathtub at home?
The most common contaminations for such products are the following:
Prohibited tricks
Before you start cleaning similar products, it is important to understand what cannot be used in such work. Unnecessary means include subsequent means and improvised
- Abrasive detergents are powders containing crystals. They can scratch the sensitive surface, which will not only spoil the appearance of the product, but will become a breeding ground for the proliferation of microbes that can easily get into microcracks.
In addition, the shine will leave the surface of the acrylic, it will become matte and ugly. Abrasives include not only purchased products, but also improvised ones. For example, baking soda or citric acid undiluted in water, tooth powder, etc.;
- chlorine or products containing it. Under its influence, the acrylic surface may darken and swell, and due to the destruction of the polymer structure, pores will appear on it. The same applies to substances such as ammonia, acetone and various formaldehydes;
- hard brushes, lips, washcloths. An ideal candidate for similar items is a soft cloth;
- very hot water. It is no less dangerous for an acrylic surface than acetone or solvent.
Under the influence highest temperature The surface of the bath may become deformed.
Methods for certain types of pollution
Before using one or another product to remove various types of contaminants (purchased or popular), you need to test it in an area hidden from prying eyes. This will preserve the appearance of the product, even if the cleaning composition is too aggressive.
How to clean an acrylic bathtub if you can’t buy commercial cleaners?
The most common and most suitable remedy is regular menthol. toothpaste. The composition is applied to dirty areas using a soft toothbrush and gently rubbed into the surface. After this, wash off with clean water.
Rust
Rust stains from the surface of acrylic can be removed using several traditional methods. For example:
Important! Any abrasive should be applied to the acrylic surface very carefully. Otherwise, you will have to solve another problem: how to remove scratches from the surface of the bathtub.
Yellowness
You can clean acrylic bathtubs from yellowish stains with products that are sold in household chemical stores.
They are designed specifically for acrylic coatings. For example, “Akrilan” or “Tim-Profi”. These compositions can restore even very neglected plumbing products to their original form. Among other things, such products will disinfect the surface. But you shouldn't abuse them. Very highest efficiency is associated with the huge variety of chemical compounds and substances in these products that harm not only the acrylic surface, but also the health of family members.
Therefore, it is enough to use them during general cleaning of the bath (1-2 times a month).
An acrylic bathtub can be cleaned of yellowness using traditional methods and available components that are used by almost all housewives. These include:
1. Salt and wine vinegar. You must proceed as follows:
- In a glass container, mix wine vinegar and salt in a ratio of 2:1;
- heat the purchased solution in the microwave to a temperature of 70 degrees;
- soak a soft cloth in water and wipe dirty places;
- leave for 30 minutes.
Do not overexpose the solution, otherwise it will damage the surface.
2. Citric acid. Dissolve 20 grams of lemon in one glass of water. Spread the resulting composition moderately over the surface of the product with a cloth and leave for 30-40 minutes. After this, wash with warm water. After this procedure, the bath will acquire its initial white color.
Limescale
Limescale deposits on an acrylic bathtub can be removed with citric acid or vinegar. The bathtub must be filled to the top with warm water (35-40 degrees).
Pour in 0.5 liters of table vinegar or add 50 grams of lemon. Leave for 12 hours, after which drain the water and wash the bathtub with clean water.
It is better not to use these two remedies at once. Vinegar can react with baking soda and corrode the surface.
Read also: how to clean a shower head from limescale?
How to clean an acrylic bathtub?
In modern apartments, practical and durable acrylic bathtubs are often installed, but the polymer quickly loses its appearance if not properly maintained. To maintain sparkling whiteness and prevent cracks and scratches, you need to take proper care of your acrylic bathtub.
Advantages
Caring for modern plumbing differs from regular cleaning of metal and iron bathtubs.
If treated with care, acrylic products will delight their owners for at least 3-10 years. They compare favorably with old massive bathtubs in their lightness, variety of models, sparkling white coating, ability to retain heat for a long time, resistance to corrosion, and absence of mold and mildew.
Care
Acrylic can be scratched when bathing pets. Iron buckets and basins, hard brushes and scourers will damage the polished surface. Using detergents with abrasives and chlorine also negatively affects the quality of the acrylic coating: it becomes dull and loses its attractive shine.
Attempts to clean the bathtub using gels containing solvents and ammonia will result in damage to the top layer: at first it will become cloudy, and with frequent and prolonged contact with these substances, it will become deformed.
The capricious polymer cannot even withstand soaking the laundry. Powder and stain removers used in washing are harmful to the fragile white bathtub.
Microcracks that arise as a result of improper use and maintenance are not only not aesthetically pleasing, but also contribute to the future destruction of the bathtub coating. Plastic cannot withstand high temperatures.
Cleaning products
In order for a bathtub covered with acrylic to remain white, you need to clean it properly every day and do not neglect the prevention of contamination. Smooth surface polymer does not absorb dirt, so just wash it with a soft sponge and soap and rinse under running water. To ensure that drops of water dry and do not leave marks, you need to wipe the coating with a dry cloth. If there is no time for these ordinary actions, and yellowness and limescale deposits still appear on the surface of the bathtub, it is worth using products designed specifically for cleaning acrylic bathtubs.
The quality of products from recognizable manufacturers is beyond doubt:
- “Ravak” is a line of products designed for cleaning, disinfection, eliminating particularly powerful contaminants, and restoring a layer of protection.
- "Akrylan", gently acting on the surface, removes soap and limescale deposits, rust and mold, and also forms a protective film, adding extra shine.
- “Tim Pro” copes unsurpassedly even with old stains, restores radiance and radiance, and fights unpleasant odors. In addition, it is needed to care for a hydromassage bathtub. So that the mechanism works long time, it must be cleaned on time and thoroughly.
- Bass is great for cleaning acrylic bathtubs and showers.
- The universal cream Cif is also suitable for cleaning acrylic products.
With its help you can get rid of yellowish plaque, rust, and lime deposits.
- “Acrylic Polish” is a line of products for the care, repair and polishing of acrylic coatings.
- “Mr. Cleaner” is an excellent economical option that not only copes with various types of contaminants and perfectly fights germs, but also protects upper layer fungus baths. It covers the surface, thereby preventing dirt from accumulating on the acrylic. After installing “Mr. Chistera”, the bath will remain white forever and retain its shine.
- Bon Professional has similar qualities.
It also forms a special film that prevents dirt from settling on the bathtub.
Liquid detergents are applied with a soft sponge, sprays are sprayed over the surface of the bath. After a certain period of time specified in the instructions for use (usually from 5 to 20 minutes), the product is washed off with water. Some gels and waters for washing acrylic bathtubs can also be used to disinfect them (for example, "Tim Pro", Ravak Disinfectant). After filling the bath with water and adding a disinfectant, you need to wait about 10 minutes, then drain the water and thoroughly wash the bowl.
For everyday cleaning, ordinary dishwashing gel is completely suitable, but old limescale deposits will have to be dealt with using gels and creams specially developed for this purpose: “Sanfor”, “Gel WC 5+”, Ravak Turbocleaner.
Folk remedies
Some folk methods will help you wash an acrylic bathtub at home:
- An indispensable assistant in removing limescale is citric acid.
The bath needs to be filled with hot water and a couple of sachets of this product added. After a few hours, wash the acrylic surface with running water and wipe with a soft cloth. Cleaning with citric acid cannot be repeated often, 1-2 times a year is enough.
- A regular toothpaste with a whitening effect can remove stains from acrylic.
- A mixture of ammonia and hydrogen peroxide helps get rid of yellowness.
- A paste of baking soda and water can remove rust stains. Just apply it to the dirt, then rinse carefully. Keep in mind that rubbing the surface of this polymer is strictly prohibited.
- Table vinegar can remove almost all types of stains.
1 liter of product is poured into a bathtub filled with warm water. During the day, it is painstakingly washed with a soft sponge, rinsed under running water and wiped dry.
- If a decent layer of limescale and waterstone has formed on the surface of the bathtub, then a slurry of water will help remove it. washing powder, water, 2 tablespoons of “Whiteness” and a tablespoon of vinegar. Apply the composition for 20 minutes, then wash the surface with a soft cloth or sponge, pressing lightly.
At the end of cleaning, the area to be cleaned must be thoroughly washed under running water.
Cleaning after repair
Sometimes the need to remove stains from plastic arises specifically after installing plumbing fixtures or after renovations in the bathroom. To wipe off the sealant, you need to be quick. Until it hardens, you can remove it with a rag and wash the surface with detergent. If the silicone layer has already hardened, It’s better to give up trying to remove it using various solvents and acetone, unsafe for acrylic.
Dried sealant must be very carefully removed mechanically: with a blade, stationery or construction knife.
Removing primer from a polymer surface is also not easy, especially without the help of harmful chemicals like white spirit and acetone.
One option is to try to remove the stain mechanically, after softening it first. Hot water is poured into the bath and connected after a quarter of an hour. This function must be repeated several times. As a result, the primer softens a little, and you can try to scrub it off with a blade or a stationery knife.
You need to act very carefully, as the risk of destroying the plastic is very high. Acrylic may lose its shine and become dull.
Cleaning chemicals
Product name | Mode of application |
The method of implementation depends on the mixture of the product. It can be in the form of cream, spray and paste. The spray should be sprayed on the surface of the bath, and the cream and paste should be spread on problem areas.
It is necessary to apply the product for the amount of time indicated in the instructions, then rinse it off with plenty of water and wipe the surface dry. This product is extremely effective in cleaning your bathtub. |
|
Apply foam to problem area and leave for a while, then rinse well with warm water and wipe dry. Do not allow the product to dry and do not mix it with other products. Acrilan perfectly fights against all types of plaque and mold formation, and also helps prevent their reappearance. |
|
The product is sprayed onto the bath and washed off with plenty of water after the time indicated on the package has expired. |
|
Apply the product to the surface, let it sit for seven minutes, then rinse it off with plenty of water. When using, it is better to wear rubber gloves and a face mask, as the product has a rather pungent odor. |
|
This product must be applied to the problem area and, after the time indicated on the package, rinse with water. Excellently fights soap stains, deposits and corrosion, and also prevents their reappearance. |
|
Spray or spread the product onto the acrylic coating and leave for the time indicated on the package. Then rinse well with running water. |
|
Team-Profi | Apply to the surface of the bath, after the amount of time indicated on the package, thoroughly rinse with water. The product actively fights against unpleasant odors, helps restore the shine of the bath and prevent further contamination. |
The list of household chemicals indicated in this table is far from final, because at the moment there are dozens of different products for caring for acrylic bathtubs.
You can find for yourself which one is best for you, but before doing this, we suggest that you familiarize yourself with traditional methods of cleaning acrylic bathtubs.
Acrylic bathtubs
Containers from this are made by extrusion and casting. In the first case, fiberglass is added for structural rigidity and epoxy resin, but such a bath must be installed on an iron or water-resistant wooden frame.
Cast bathtubs can be placed directly on legs, because they are essentially the most solid and strong.
This strength makes it resistant to mechanical damage, so cleaning such a container is much easier, since you don’t have to be constantly afraid of damaging it.
Caring for an acrylic bathtub is simplified by the fact that during manufacture they include additives that prevent the growth of fungus, microbes and mold on the surface. Acrylic is also not susceptible to any type of corrosion.
How to clean an acrylic bathtub? Most of the dirt can be simply washed off from the surface of the bathtub with ordinary water and a sponge without the use of cleaning agents.
Since it scratches quite easily, the products used for cleaning should not be abrasive, i.e.
How often should I wash?
The more often you clean your acrylic bathtub, the better. After all, it’s even easier to wash off small stains frequently than to try to clean and scrub away deep-seated stains later. After each use, it is recommended to rinse the bathtub with water and a mild detergent, for example watery soap, and then wipe it dry with a rag or an old towel.
Cleaning the bathtub at home is the most active substances Recommend once every 2-3 weeks. The product must be applied to the entire surface, allowed to sit for some time, and then carefully rinsed off.
To prevent yellowing from constantly dripping water on the bathtub, you need to monitor the serviceability of the taps and repair them in time.
If the surface has already turned yellow, then the rust should be cleaned with special means designed to remove it.
Removing deposits
If the tap water is quite hard, then deposits often appear on the acrylic bathtub - the so-called aqua stone. To remove it, you can use the appropriate cleaning agents or the simplest folk methods - for example, from time to time making a weak acid solution.
- Fill the bathtub with water at room temperature.
- Add 1-2 liters of a weak solution of vinegar or citric acid and stir it thoroughly.
- Leave for 12 hours.
- Drain the water, rinse the bath thoroughly and wipe dry with a soft cloth.
If you need to disinfect a bathtub at home, the procedure is no different, you just need to add disinfectants.
What means should I use?
It is better to care for an acrylic bathtub using mild detergents, such as those used for washing dishes.
Liquid and regular soap also work well. To clean the bathtub, you can rinse out an old bottle of shampoo or shower gel that has run out, because they traditionally still have a lot of product left on the walls. Such soft compositions can be left on the surface of the bath forever without the slightest risk of damage.
How to clean an acrylic bathtub if it has become dull and yellowed? To restore its shine, after washing it is lubricated with polishing compounds.
Powders like Pemolux, Biolan and Comet, which clean specifically due to mechanical friction, are not recommended for use.
Then the question arises: how to safely clean an acrylic bathtub? The action of watery and pasty products is more based on the chemical removal of contaminants, so they can be used without the risk of destroying the surface. But traditionally they contain substances that are quite harsh on the skin, causing irritation and allergies, so it is better to clean the bathtub while wearing rubber gloves.
So, how to clean an acrylic bathtub, if preference is given to factory-made products?
- Bass is a liquid cleaner used for cleaning bathtubs and showers at home.
- Cif is a universal product for all surfaces in the bathroom.
- “Acrilan” – as the name suggests, this is a special product for acrylic bathtubs and other similar surfaces. It comes in the form of foam and copes unsurpassedly with mechanical, chemical and biological pollution and yellowness.
What products should definitely not be cleaned:
- abrasives;
- hard metal brushes;
- products containing a lot of ammonia, bleach, acetone or formaldehyde.
What is acrylic
Knowing the features will help you choose the right tools.
Acrylic is a hard plastic formerly used in the production of dentures and now also used in the manufacture of plumbing fixtures. The first standards of such bathtubs were expensive, so a number of improvements were made that made them cheaper and more affordable. Today, two types of acrylic bathtubs are produced:
- Extruded.
- Cast.
The difference between them lies in the formation of the frame, but the care is similar, since the surface is in any case made of the same thing. It is important to know what you can use to clean such bathtubs, and what you should never use.
How not to clean an acrylic bathtub
It is not permissible to clean an acrylic bathtub with powdery substances, as over time they will cause tarnishing.
Abrasive compounds are also not applicable - constantly use watery products without alcohol, acetone and ammonia (these components will harm the structure of acrylic, which will lead to cracks and abrasions). Standards with formic acid and formaldehyde is also prohibited.
You cannot clean an acrylic bathtub with hard metal and plastic brushes, even if you select the right remedy, but using the wrong cleaning tools will simply damage the outer surface of the bathroom.
Only soft fabrics are acceptable.
Chemical cleaning
Clean an acrylic bathtub with use modern means it won't be too difficult. Manufacturing companies give wide choose industrial compounds perfectly suitable for acrylic. Before the product is released for sale, it is constantly tested in practice, so its use will help maintain the cleanliness of the bathtub and maintain its original appearance. At the same time, the cleaning process does not take enough time and effort.
Among the more popular compositions are:
- Acrilan;
- Silit;
- Sarma;
- Acrylic-Net;
- Star-Acrylat.
These gels should not be poured onto the bath immediately, first on a soft napkin, and only later on the surface.
Use a napkin to gently wipe off any stains and leave for 5 minutes. After this, rinse thoroughly with water and be sure to wipe with a dry cloth.
It is possible to use all-suitable products, for example, from Ravak. They are also intended for acrylic sanitary ware, and are capable of fighting not only ordinary types of dirt, but also rust or limescale. If you can’t find these compounds on sale, choose the others, but only those suitable for acrylic.
Cleaning with folk remedies
Methods proven by housewives will also help clean an acrylic bathtub.
At home, you can easily find citric acid, vinegar, laundry soap and other products that can be perfectly used in cleaning acrylic surfaces. Let's take a closer look at them in the fight against different types of pollution.
How to get rid of yellowish spots
To remove yellowness simply with folk remedies, for example, using bleaching compounds.
- Lemon juice or acid are natural remedies that can safely whiten hair. Squeeze lemon juice or dilute the acid powder in water (until completely dissolved) and apply to the yellowed areas of the acrylic bath. Leave for 5-10 minutes, then rinse with water.
- Vinegar - this product is effective, but it can only be used to clean an acrylic bathtub in a diluted form.
Use it constantly aqueous solutions with vinegar in a 1:1 ratio. Application is carried out in the same way as in the case of lemon juice. Moreover, in addition to the whitening effect, vinegar has antiseptic properties.
- Whitening toothpaste is also excellent at removing yellow discoloration. Squeeze a small amount onto a napkin and carefully distribute it over problem areas. After 10 minutes, you can wash off the composition.
How to get rid of rust
Hydrogen peroxide is a great way to remove corrosion from an acrylic bathtub.
It should be applied to the rusty marks with a cloth and left for 10-15 minutes, then washed off with a soapy substance.
You should not use white or bleach, as you can spoil the integrity of the acrylic or its shine.
If hydrogen peroxide or lemon juice could not dissolve the corrosion stains, then it is better to use special industrial products. Homemade recipes can only remove the freshest rust marks, but it’s better to deal with old ones differently. In addition, experts say that it is easier to prevent rust on acrylic than to try to scrub it off later.
How to get rid of limescale
Baking soda, vinegar and bleach are great for removing hard water deposits on an acrylic bathtub.
First, make a paste of baking soda and water and rub it on the surface of the bathtub. While the composition is working, make a solution of vinegar, water and bleach (all components one part at a time). Vinegar-bleaching agent is applied to the soda layer, after which you need to leave the solution for half an hour. Finally, just rinse everything off with water and wipe the surface with a dry cloth.
You can also soak napkins or sheets in vinegar and water. Without twisting them too much, cover the bath with them and leave for half an hour. During this time, the composition will take effect, thanks to which the limescale deposits will simply be washed off using the usual washing method.
A solution of soda and soap removes old plaque - combine 200 g.
first component and 100 gr. grated soap or 100 ml watery. In the first case, you need to add a small amount of water to make a paste. Apply the solution to the wet surface of the acrylic bath and leave for 20 minutes. Rinse off the composition with plain water.
VIDEO TO HELP:
