How to arrange a small garage. Useful accessories for the garage with your own hands: manufacturing technology. Magnets are our everything
It’s not for nothing that men’s garage is considered their personal territory and “work office.” Since many of you have vehicles, you also need a well-equipped space to maintain it. Today there are a huge number of ideas on how to furnish and make the most productive use of the space inside the garage. Read more about them in the article below.
It’s worth starting with an important clarification: in view of the fact that the garage, unlike, is primarily a work space, its arrangement involves maximum convenience for the owner first of all. Thus, if when carrying out renovations you are thinking about how it will look in the eyes of guests, then the interior decoration of the garage does not have to boast an attractive design.
Its main purpose is to provide a spacious room for subsequent filling with a number of useful and necessary things, such as tools and practical items interior In addition, many owners do not hesitate to transform part of the garage into a natural warehouse, which also entails the installation of various drawers, cabinets, etc. 
Interior decoration
At this point, the main question is the use of specific materials that are most suitable for the needs of this type of building. Thus, car enthusiasts often prefer classic concrete floor With cement filling due to its excellent practical qualities - heat resistance, moisture resistance and low susceptibility to mechanical stress. Since the garage has already been designated as a work space, the presence of such conditions in it is quite natural.
In a similar way, you can display a list of the least profitable finishing solutions, among which wooden beams or chipboard. Wood is an excellent decorative material and is well suited for construction country house for relaxation, but not in the case of arranging a workspace where it will be regularly exposed to harmful influences. As you know, wood is seriously susceptible to deformation and has flammable properties, which is extremely unprofitable and dangerous in the working conditions of a garage.
Attention! Focusing on safety standards when decorating a work space is no less important than its practicality. Consider the possible flammability of many materials, their moisture resistance and tendency to destruction.
Pay special attention to lighting. Create a layout for the placement of lamps and luminaires of varying power, depending on how this or that place in the building will be used. So, the most intense light may be required where you are going to carry out repairs or inspect the insides of your car.
The ceiling itself can be finished with several types of materials, including a regular layer of plaster or the use of metal sheets. At the same time, do not forget that the first option requires good waterproofing, and the second tends to heat up quite quickly, which, coupled with a certain insufficiently developed ventilation system, can make the room extremely uncomfortable to stay in. 
The opposite situation also deserves attention, when, due to cold weather outside, a building made of brick and concrete cools down significantly. The problem should be solved by providing the garage with heating. However, you shouldn’t be too zealous with the latter, because when high rates thermal insulation of walls, the level of humidity in the building increases due to condensation, which will harm electrical equipment.
Interior objects: what your garage is missing
It's wise to manage the available free space in the garage so that there is enough space for work, which is much more difficult than it seems. Primary attention should be paid to the following objects and interior decoration items:
- Shelves for storing tools or small consumables, including nails, small automotive parts, etc.
- One of the most convenient options for storing a large set of work equipment is a panel with holders. Thanks to her, everyone is the most important tools will always be visible and directly accessible at any time.
Steel structures, such as wall rails, used to support large equipment and parts. - Modular universal cabinets and cabinets with many departments can accommodate a huge number of things needed for repairs and construction.
- A personal workbench in one of several known configurations, including wall-mounted folding, mobile and portable single-module workbench. Having something like this in the garage is the dream of any car enthusiast.
- Racks, which can also be either stationary or mobile. Their popularity in household premises due to the reliability and ease of storage of almost any equipment, materials and tools. In addition, they can be improved by screwing self-tapping screws onto them, securing small objects from falling.
All of the listed garage decoration options are offered by specialized stores with the possibility of individual adjustment to customer requirements. However, no one is stopping you from assembling these structures yourself. 
Creative solutions
When repairing a car, the owner often needs to crawl under the bottom vehicle for access to those spare parts that cannot be reached from under the hood. To make this task easier, there are two options:
- An inspection pit, as a classic solution from auto repair shops, provides the car owner not only with the opportunity to easily inspect the underside of the car, but also to conveniently carry out any repair work with direct access to the necessary tools. However, the implementation of this option in the garage is one of the most labor-intensive in the process of its construction. In addition, it is impossible to create such a hole when high level groundwater.
- An alternative to the previous solution is a car lift, which, unlike a pit, does not require such a radical change in the structure of the garage. In addition, its acquisition and installation today is no longer such a cumbersome task that only the most prestigious repair centers could afford.
Thus, the garage can become a real relaxation corner for car lovers, as well as useful and functional room for the needs of the whole family.
Garage arrangement: video
The garage should not only be a safe and reliable shelter for the car, but also a place in which the car owner would enjoy spending time and, most importantly, conveniently perform various kinds work related to vehicle maintenance and more. Interior arrangement garage requires a responsible, competent and balanced approach. Therefore, before taking on such work, be sure to read the proposed instructions.
Work on the internal arrangement of a private garage begins with drawing up detailed plan. From the very beginning, you need to organize the work, clearly dividing it into successive stages. The plan will allow you to avoid many inconveniences, imagine in advance what the garage will look like after completing the interior work, and calculate the approximate costs of the work.
If you wish, you can make a plan not on paper, but using a special software for computer. Modern applications provide extensive design and visualization capabilities. You will be able to immediately see how the room will look after finishing and arrangement work is completed.
The drawings are drawn up in the following order:
- the outlines of the garage walls are drawn. Choose a convenient scale and indicate the main dimensions each wall;
- being thought through interior layout. Mark the parking area, various work areas, storage areas for various accessories, etc.;
- zoning is in progress internal space garage and a kind of design project is created. Think about the best places to install a workbench, shelving, sink and other necessary accessories, which will be discussed later.
When designing a garage, focus primarily on your needs. Do everything in a way that is convenient for you. The main thing is that the result is a cozy environment conducive to productive work.
Pay special attention to the color scheme. The garage space does not have to be gray and nondescript. The best option is a light, cheerful color scheme using warm, unobtrusive undertones.
There are many design techniques, allowing you to visually enlarge the space and hide various imperfections. For the rest, be guided by your individual preferences.
Selection of materials for interior decoration
First of all, materials for interior decoration garages should be practical. Color and price are secondary issues. The finish should be beautiful, non-marking, easy to clean and safe.
Among the main requirements for interior finishing materials for a garage, the following should be noted:
- non-flammability. Select materials that do not support combustion and do not emit toxic substances when heated;
- resistance to aggressive effects of various chemicals;
- resistance to all kinds of mechanical influences;
- ease of care;
- resistance to various contaminants.
When choosing between color and ease of use, focus on the second indicator. Wear resistance, long term services and whenever possible environmental Safety– all this should be present in the characteristics finishing materials.
In a relationship color range be guided by your taste, because you will have to work in this garage and you should be comfortable in it.
What equipment must be present in the garage?
If a basic wheel change can be done using a jack and a set simple tools, then for more serious work the garage must be equipped with special equipment.
Thanks to this device you can organize as conveniently as possible working space. The workbench is more convenient and easiest to assemble from wood. It is recommended to lay and secure a sheet of metal over the work area to protect the wood from rapid deterioration.
If possible, build a two or even three level workbench. This installation will allow you to place the maximum number of necessary things.
Car repairs quite often require the use of a welding machine. For a garage, it will be enough to buy a simple carbon dioxide model that works using wire. Also a good option is a unit with tungsten electrodes for working in shielding gas.
Water-oil will separate spruce
With this device you can purify the air from various impurities in the form of water, oil and other elements. The water-oil separator provides invaluable assistance when painting a car. Thanks to this device, the most uniform distribution of the coloring composition will be ensured.
Of course, it is impossible to equip a full-fledged car wash in a private garage, but basic amenities can be created. All you have to do is bring it to the garage water pipe or at least a hose and organize the drainage of used water into the sewer.
Basic engineering systems
When designing the interior of a garage, special attention should be paid to engineering systems, such as drainage and moisture insulation. In the absence of the mentioned systems, the air in the garage will always have high humidity, which is not in the best possible way will affect the condition of the car and, in general, everything that is in the room.
Work on the engineering arrangement of the garage begins with the installation of a drain. To do this, it is enough to secure the gutter in such a way that all possible moisture does not flow down the walls of the garage, but is drained through the gutter.
Install air vents at the bottom of the garage door and at the bottom ventilation pipe. Install protective grilles on the ventilation openings. For a small garage this will be enough. In case your garage has large area, consider installing special fans to ensure maximum efficiency air exchange.
Arrangement of the entrance
At this point, you need to focus on the floor level. If the floor is higher than ground level, do concrete blind area. If the floor is below ground level, organize drainage system to remove moisture.
The most optimal and popular option for arranging the entrance is based on creating a floor with a slope of about 15-20 degrees. The resulting design will be comfortable, safe, efficient and functional. You will be able to drive into the garage normally, and thanks to the slope, the risk of icing will be eliminated.
The most important work on the interior arrangement of the garage
To make full use of the garage, it must be equipped with a comfortable and well-finished inspection pit.
First stage. Insulate the inspection hole. No special effort or care is required when finishing this object. It is enough to attach polystyrene foam to the walls of the pit using special glue.
Second phase. Install portable lamps for the most convenient work in the inspection pit.
Third stage. Make a ventilation hole at the bottom of the inspection hole.
Fourth stage. Install the cover according to the dimensions of the inspection hole. It is best to install the cover so that its top edge is flush with the floor surface.
If you have a cellar, pay attention to its arrangement.
First step. Make holes in the basement walls for ventilation.
Second step. Treat the cellar walls with lime.
Third step. Install comfortable staircase with a slight slope to descend into the cellar.
Work on the interior arrangement of the garage requires mandatory thermal insulation. Mineral wool or polystyrene foam is usually used for insulation.
First step. Attach a frame made of wooden blocks to the insulated surfaces. Attach the frame elements in increments of 1-1.5 cm smaller than the width of the insulation boards.
Second step. Cover the frame with a vapor barrier film and secure it with a construction stapler.
Third step. Place the insulation in the space between the frame bars.
Fourth step. Cover with a thermal insulation layer plastic film
and secure it with a staple gun.
Fifth step. Cover the insulated surfaces with the selected finishing material. For finishing the ceiling it is most convenient to use a lining or plastic panels . More– plastering. The walls can be plastered and painted, covered with siding, all kinds of wood panels, drywall, etc.
You can simply level it using a concrete screed and treat it with special protective impregnations. If desired and available funds You can lay ceramic tiles on the floor or even install a modern self-leveling structure. At this point, be guided by your own preferences.
After insulation, proceed to work on electrifying the garage. The main thing is to provide uniform lighting of sufficient power. Think about where the outlets should be. There should be at least two lamps in the garage: a common lamp and one above the workbench. It is also advisable to install a separate lamp where the car hood is usually located.
For convenient storage of various accessories, install several or at least one cabinet in the garage. However, there is not always enough space and money to install a full-fledged cabinet system. A more budget-friendly and ergonomic option for solving the problem of storing various accessories is to install functional racks and wall shelves.
Any location is suitable for installing racks and shelves. The most important thing is that the furniture does not interfere with your ability to work normally in the garage and move around the room. The only important requirement is that the distance between the car and the hanging shelf must be at least 90-100 cm.
At the end, all that remains is to equip the garage with small pieces of furniture such as chairs and various accessories at your discretion.
Thus, although the interior arrangement of a garage is a fairly simple task, its implementation must be approached with maximum responsibility and knowledge of the matter. Follow the recommendations received, and your garage will become the most convenient and beautiful.
Good luck!
Video - Do-it-yourself arrangement of the garage inside
Almost every motorist has his own garage, in which he often spends entire weekends. The ease of performing the work, as well as its success, largely depend on the situation in the garage. How much free space, is there enough lighting, is there necessary equipment– all this and much more must be taken into account. Arranging a garage with your own hands is a complex and multifaceted process that will require some knowledge and skills from you. We will tell you how to arrange the inside of a garage with your own hands and what is needed for this.
First of all, it is necessary to determine the main zones in the project. By properly distributing your workspace, you can easily navigate your garage and find all the things you need without any problems. If you plan to build a building from scratch, the best option is to create a two-level system. The workshop is located at upper level, and the pit and basement are on the bottom.
If you already own a garage, then carrying out a complete remodel can become difficult and quite expensive. But this does not mean that nothing can be done. Designing the interior of a garage is a truly important undertaking that should never be neglected. We recommend performing the arrangement based on the following instructions:
- Do a good cleaning. Remove all unnecessary trash, free up your workspace as much as possible in order to subsequently evaluate the available space.
- Draw a small sketch according to the dimensions of your garage. Place all the necessary shelves, racks, work machines and other objects on it. This must be done so that all of them do not interfere with your work with the car.
- Also, according to the plan, you should calculate the width of the passages. A small amount of free space will only create problems in vehicle maintenance.
- Choose a gate that will not create obstacles for the car during entry.
These few simple points will help you start arranging your garage with your own hands.
Choosing materials for arranging a garage
Once you have a preliminary design, it's time to start bringing it to life. It’s worth starting with the selection of materials, because the quality and security of the entire building depend on them. When choosing materials, you should definitely be guided not by their appearance, but directly by functionality.
A garage is not a living room or a hotel, so strive for some specific exquisite interior not worth it. When choosing materials, you should pay attention to several key features. The purchased products must meet the following requirements:
- safety for the user and the environment;
- non-flammability;
- resistance to corrosion and adverse weather conditions;
- high strength and wear resistance;
- ease of care.
Pay special attention to the ceiling and flooring. On the ceiling you can provide a variety of shelves for storing things. It also needs to be insulated with a layer of thermal insulation so as not to freeze in the garage in cold weather. However, too thick layer may lead to condensation.
The floor in the garage also plays an important role. It will bear all the loads: the weight of the car and all equipment located in the room. There will always be quite a lot of water, dirt or melted snow in winter. And during repair work There are frequent cases when oil or other working fluid drips onto the coating. For these reasons, the floor must be resistant to corrosion, various chemicals, while being easy to clean. The simplest solution is a concrete floor.
High-quality ventilation and lighting are the key to fruitful work
Working in a garage is impossible without effective ventilation and good lighting. A garage is an enclosed space. There will be impenetrable walls on three sides of you, so all the dust and dirt that is in the air will remain in the room even with the gates open.
In order to effectively remove it and ventilate the garage, it is necessary to establish a ventilation system. If your garage has special air vents, check to see if they are clogged. You can optionally create ventilation holes at the top or bottom. If you have a basement, be sure to install ductwork to the outdoors and indoors. If the back wall of the garage is free, then you can create an outlet in it from above.
In rooms with a large area, these solutions may not be enough. Then you should take care of special fans that will circulate the air. This will avoid gas pollution in the room, as well as get rid of unpleasant odors.
Now let's talk about lighting in more detail. Natural light is ideal, so if possible, it is recommended to include a small window (or several) in the garage design. However, this option is not possible in every room, especially if you have a garage in a cooperative. Then there is only one way out - artificial lighting.
You should provide lamps in the following places:
- directly on the ceiling (general lighting);
- additional lamp above the hood;
- when and working equipment (place several light bulbs above us);
- in the cellar and inspection hole.
But even this set may not be enough. Then you should equip the garage with several outlets in convenient places so that you can easily connect portable portable lights or a carrier. High-quality lighting will simplify all work, while preserving your vision, since dark room you will have to constantly strain your eyes to find the necessary items.
How to arrange the inside of a garage with your own hands
It's time to move on to the interior arrangement of the garage. What does this include? These include a variety of shelves, racks and stands, as well as a number of specialized equipment. Order in the workshop will allow you to quickly and easily find any tool and parts. In many ways, this can be achieved through storage facilities. This includes:
- Shelving – special metal or plastic structures, which represent a multi-level open cabinet without doors and with many shelves. Pay attention to the distance between the shelves and their width. Racks allow you to compactly store virtually any item.
- Garage shelves are hanging structures, which are attached to the wall using mounting elements (screws, self-tapping screws, etc.). The main advantage is that they are more compact than shelving, and you can make them yourself. Can also be made. Make special shelves with holes into which a variety of keys, screwdrivers and other tools will be inserted.
- Special shields. These are also hanging products that have several hooks in their design. You can hang work clothes, hats, garden tools or any other object that can be attached to a hook.
One of the most popular questions is how to install racks and shelves? It is recommended to install racks along the walls so that they do not interfere with movement around the garage and are always accessible. Shelves can be hung virtually anywhere. The most compact will be corner shelves. For rarely used items, you can place shelves near the ceiling. Here you need to make sure that they are strong so that all things do not fall on your head or on your car.
A separate option is specialized. She somewhat resembles a regular one kitchen furniture: there is a table with numerous drawers, hanging compartments, a variety of pencil cases and cabinets. This is the most expensive, but at the same time practical option. This kit will allow you to easily compactly place any things in your garage, from tools to large objects.
Garage equipment: must be in order!
There must be order in absolutely everything, that is, not only in tools, but also in equipment. Many people have a compressor stored in the garage, welding machine or washing device. These products are in most cases not used daily, so it is better to create a special compartment for them that can always be quickly accessed. This way, you will free up some space in the garage, but at the same time you will always have the necessary equipment at your fingertips.
If they let you cash, provide a water supply system and a washbasin. After a long repair, your hands will be covered in oil, fuel oil and dirt. Washing them in a bucket or watering them from a bottle is not the most practical and convenient option, so access to water is topical issue in the arrangement of the garage. Plus, you can always do wet cleaning and also wash the car.
Finishing the interior space is an important step in arranging your garage!
The choice of finishing materials should be taken very seriously, because they are responsible for the quality and appearance of the interior of the room. It is recommended to properly plaster or tile the walls. The ceiling can be made of sheets of plasterboard, metal, or simply plastered. These options are easy to install and durable.
It is recommended to make the floors at a slight slope, and also to provide drain holes for water. This solution will save you valuable time cleaning your garage, since all the water and dirt can be quickly washed into the drainage system. If you plan to make a cellar, its floor must be filled with concrete, and the walls, as a rule, are made of brick.
Take care of the comfort in your garage. If space allows, install a small table and chair. You can always do some drawings or drawings on it, as well as have a snack during the day. You can design a special folding table. Its tabletop with legs is attached to the wall with hooks. Having unhooked them, you unfold the entire structure.
Be sure to mount an outlet and a compact stand for a radio or small TV. Many drivers like to perform work with music or a television program in the background. In addition, you can always recharge your mobile phone on such a shelf.
Are inspection pits and basements required?
If you are a car mechanic with extensive experience, then most Repair work can be done in the garage. However, having a tool does not guarantee success. An important component in the garage. It allows you to reach car components located near the bottom of the car. Many car owners are interested in how to properly equip an inspection hole?
The arrangement of the inspection pit should begin with the height of the driver. So that you don't hit your head, but you can still reach all the parts in the lower part of the car. The depth of the inspection hole should be 10 centimeters greater than your height. It is advisable to strengthen the edges of the pit with something (metal corners or the like). This will prevent crumbling and subsequent destruction.
Place a couple of lamps in the hole. Be sure to provide several small niches in the side walls. You can store tools or small car parts that you have removed in them. Thanks to these niches, everything you need will not be on the floor or outside the inspection hole, but at your fingertips.
Additional conveniences will be the presence of a convenient descent (or steps), as well as a direct cover for the pit. These can be ordinary boards of the appropriate width. Thanks to this solution, you will not accidentally drop a tool into the hole and fall yourself.
The cellar is very useful. You can store canned food, potatoes or other things in it. When arranging a cellar, it is necessary to provide for the presence ventilation holes and lighting. Also, be sure to make a convenient descent, since without it moving things into the cellar will be extremely problematic.
If you are going to create an inspection pit or basement from scratch, then you should pay attention to one very important criterion - the groundwater level must be below the floor level of the pit or cellar. The walls of the cellar must be made of hard and durable materials. You can use foam blocks or M400 concrete.
Unlike the weaker sex, who are prone to cosmetic ordering and aesthetics in the arrangement of things, men structure the surrounding space in accordance with internal logic. Male order- is the creation of a universal working environment where nothing distracts from productive activities.
Features of vision allow men to isolate only small area review, so to speed up the search for the right thing, motor memory and space optimization are activated.
Interesting: Psychologists characterize male vision as "tunnel", tuned to single distant objects, and female - as "panoramic", immediately covering everything that comes into view. Therefore, women find it easier to search for individual items than men.
What is stored in the garage?
There are no motorists for whom a garage is only a place to park a vehicle. In the garage Necessarily will find shelter necessary for the operation of the car items And equipment:
Of course, life will force you to bring your bike or skis into the garage, but if think over its layout even before construction, then in the garage box you can find a storage place for them, and for the cellar, and for the inspection hole.
On the right side of the garage wall should be stored fire extinguisher, sand reserve And shovel. A washbasin and a hanger for work clothes would be appropriate in the garage.
How to arrange the inside of a garage with your own hands: space optimization
How to do it right arrange a garage and where to start? Optimization working space begins with assessing the free volume of the garage.
For your information: Standard garage- 3 x 6 with a height of just over 2 meters. It's good if possible increase width by 1 meter. For freedom of manipulation, it is important to have 1 meter of free space from each side of the car to the wall or rack.
The next step is to think about:
- which under no circumstances should be stored in a garage;
- what will be in demand most often:
- what tools can be grouped into sets according to their intended purpose;
- what items or equipment have multifunctional uses;
- How is the garage supposed to be cleaned?
Cleaning the garage will not be a problem if you install shelving and a workbench on legs 15 cm from the floor, which can be reasonably done using the technology of polymer self-leveling floors with a slight slope towards the gate. In this case, all cleaning will be reduced for floor cleaning stream from a hose.
Watch a video on how to arrange the inside of a garage:
The most efficient storage system - using the ceiling and walls
To ensure order in the garage and create compact and easy-to-access storage areas, the following are suitable:
- shelving (made of wood or duralumin corner) located along one or two walls of the room;
- railings on the walls steel tubes and strips for hanging tools and organizers;
- typesetting panel with holders;
- galvanized mesh stretched over the wall as the basis for hanging tools;
- stand-box for tools;
- component boxes;
- hooks on the walls for large equipment, hooks for hanging pockets and shelves for small items, made from plastic packaging of used liquids;
- metal mesh hanging containers for paint or fertilizers;
- a cord stretched or secured with loops on the wall for storing tubes and slats;
- hanging cases from packaging or plumbing pipes large diameter;
- plastic containers for storage under the ceiling;
- hanging shelves above the car for infrequently used items (consumable lumber, garden tools, skis);
- sheet building material is placed vertically along the walls with fixation.
You can see how to effectively hang tools and equipment for your garage in specialized stores.
How to arrange the inside of a garage with your own hands - photo: 
The workbench as a center of worker enthusiasm
It's rare that a man doesn't dream of workbench, and if the size of the garage space allows, without a doubt, the dream will come true. You can buy a workbench or make it yourself, but at the same time respect following rules:
- it should be compact and not clutter up the space;
- universal in use;
- reliable and stable, quite heavy;
- have a functionally developed space under the countertop;
- match the owner’s height (level work surface in the middle of the palms);
- do not have contact with the wall storage system above the table (to avoid vibration transmission when working on the workbench);
- the body of the workbench made of wood requires fire-resistant impregnation;
- strengthen the wooden tabletop metal sheet(S=5mm);
- a metal workbench is made from pipes or a corner;
- a large number of drilled holes on the legs will allow you to diversify the shelf system and drawers under the tabletop;
- the table surface is zoned by placing a vice, sandpaper or drilling machine in the working area;
- the sides along the edge protect against falling of tools or small parts;
- the depth of the table is not made more than 70 cm, so as not to create effort when stretching your hand to the far edge;
- sockets are installed in close proximity, with neat wiring that should not dangle under your feet;
- At the workbench, sufficient artificial lighting is created, although natural lighting is preferable in the garage.
Important: When designing a garage, a place for a workbench is chosen so that you can work on it regardless of the presence of a car.
When using a workbench periodically for minor car repair work, it is enough to purchased in a retail chain:
- mobile workbench with folding tabletop;
- single portable work desk;
- mobile workbench on wheels;
- folding wall workbench.
Wide use of workbench for different purposes bad for car storage: abrasive dust, caustic dirt are deposited on paint coating and in the salon.
Requirements for racks and shelves
If you are thinking about what to do in the garage with your own hands, then this is of course racks. They differ from shelves in their mobility. Their horizontal structures, leaning on the racks, easily move in space.
The shelves are individually attached to the wall and have a much lower load-bearing capacity.
Therefore, it is preferable for garages racks, capable of bearing a significant load, especially if the racks are fixed against the walls for reliability.
For the supporting frame of the rack, use rolled metal(40x20mm) or bar(50x50mm), and shelves(stationary or removable) made from OSB, plywood(12mm) or set of slats. Combined shelving designs are common, including elements made of plastic. The metal is treated with an anti-corrosion agent, and the wood with an antiseptic. To strengthen multi-sectional racks, channels are used.
By type, this storage method is divided into:
- stationary rack (optimal for a garage);
- mobile storage structures;
- suspended structures for storage made of galvanized metal;
- universal prefabricated (purchased) racking equipment.
Shelves in racks should not bend under the load that will be stored on them.
For all sorts of small things (drills, keys, screwdrivers, hand tool and so on.) in a convenient way storage are open or closed (locker type) stands above the workbench. Between screws that are not screwed in completely, you can place everything that requires always at hand.
Such a stand can be protected from dust and fumes by a single or double door, inner side which will also be a storage place.
main idea garage space optimization- 100% use for storing the entire space, all surfaces of the room, including the walls and ceiling of the garage.
Without what can a garage not be convenient for self-service?
If practice and skills allow you to do without constantly visiting a service station, then the motorist needs inspection hole. It is laid down during the creation process project documentation . To implement the idea, it is important to know the depth of groundwater and deal with its arrangement during the construction of the garage.
The dimensions of the pit are determined depending on the size of the car’s wheelbase and the height of the car owner. With a width of 80 cm, its depth will be equal to the height of the owner + 20 cm. The length is determined based on from the length of the car+ 1 meter (for freedom of access). The inspection hole should be located exactly in the middle permanent parking of the car.
The floor and walls of the pit are laid out roll bitumen sealant, bottom reinforce. The recess itself is concreted or lined with hardened brick (1 brick or ½), while small areas are left in the walls. niches for tools, install waterproof lamps and sockets for electrical equipment (the wires must be placed in corrugated protection).
The edges of the pit are edged metal corner. In the absence of a car, a pit cover a shield made from boards.
Electrical wiring in the inspection pit must be done in compliance with all norms and rules, preferably professional.
Another option how to equip a garage with your own hands- photo: 
If you decide to place a vegetable storage...
The cellar, like the inspection hole, is laid at the very beginning of construction garage. Its device is possible if groundwater allow you to dig a hole up to 3 meters deep under the garage floor. It is important:
- create a rainwater drainage system;
- install a drainage system around the perimeter of the building;
- waterproof walls;
- pour hot bitumen onto the crushed stone-sand cushion, raising it along the wall by 1 meter;
- concrete the floor;
- lay out the walls with bricks;
- treat the walls with sealant from the inside;
- install ventilation (natural - from the supply and exhaust pipes, or forced);
- dry the cellar;
- insulate walls and ceiling;
- cover the subfloor with a monolithic slab with a hole for a manhole, which will become the floor in the garage;
- a sealed hatch is installed on the hole;
- do interior decoration;
- install a sliding or removable staircase.
Reference: Arranging a cellar in compliance with all requirements for its functionality and safety is an expensive undertaking. It will pay off only if there is a real need to preserve the harvest in large quantities.
Now you know how to equip a garage with your own hands. Depending on your goals, a garage can be a vehicle storage facility, a convenient craftsman’s workplace, and a vegetable storage facility at the same time. The main thing is that it contains order And your corner for every thing you need.
Probably every car enthusiast dreams of having his own garage in which he can safely store his favorite car. Perfect organized space will be a great place to park your car. There is no chaos here, scattered instruments that have no specific place. Here, each element is placed in its place, so you don’t have to waste time searching for it.
Creating an orderly, friendly place is an important task. How to arrange a garage with your own hands inside, photo real interiors, how to equip a workshop so that work in it is pleasant, convenient, and there is no shortage of basic tools? Innovative creative solutions and professional garage equipment are used, which we will discuss in this article.
Room size
The garage serves many functions:
- parking space for a car;
- convenient place to store accessories and tools;
- storage place for bicycles, camping equipment, and gardening equipment.
Usually, we are less likely to be puzzled by the question of how to properly arrange the inside of a garage than when decorating the interior of a house. This is justified because a car parking space does not have to be stylish, but it is good if the garage meets our requirements and needs.
Need to take care of functional design free space. Often the main problem is the size of the garage space, which determines whether there is room for convenient closet, rack, workbench.
Scheme. Placing cars in the garage
The rules regarding the size of parking spaces for cars establish minimum dimensions of 2.3 × 5 meters. This is the minimum space for a car to enter the premises. Cars from the popular segment have approximate dimensions:
- length – 4.5 meters;
- width – 1.8 meters.
While maintaining a minimum distance between the contour of the car and the walls, only 0.5 meters remains. If you need to store anything, the free space should be more than the minimum.
Scheme. How to choose garage sizes
The minimum dimensions of a standard universal garage are:
- length – 5.5 meters;
- width – 2.7 meters.
In such an area there is no space for shelves, cabinets under all the walls, otherwise it will be difficult to get out of the car with bags, packages, and a child car seat. If we want to organize in such conditions warehouse space, it is worth thinking about shelves and hangers located under the ceiling, which do not interfere with free movement.
In a 10-foot-wide garage, there isn't enough room to think about shelving mounted perpendicular to the entry gate. It is safer to plan shelves in the back of the room. The length of the room should be at least 6-6.5 meters.
If the passage between a parked car and the walls is 1.2 m wide, you can find space for:
- cabinets;
- workbench;
- bicycle racks.
When there is 1.5 meters of free space along one of the walls, you can install:
- closet;
- rack;
- storage racks;
- sink.
The width of the room should be 3.5 m.
Flooring and flooring
good flooring – important stage arrangement of the garage. The garage floor must have a number of properties:
- strength;
- do not give severe cracks;
- ease of care, removal of oil stains;
- not slippery;
- safe, non-flammable;
- ease of dust removal (an eternally dusty concrete floor is not the best solution).
Modern floors are durable, easy to use, easy to clean, resistant to chemicals, mechanical and abrasive substances.
Ceramic tiles, terracotta
Terracotta and tile ceramic surface – perfect solution, the tiles are easy to clean, the rough surface will prevent slipping. The disadvantage of tiles is that regular cleaning of the joints between the tiles is too troublesome.
Vinyl floors
Modern compact floor standing vinyl panels Made from durable, technologically advanced plastics. The panels have a number of advantages:
- not slippery;
- resistant to gasoline, oils, acids, chemicals;
- easy to clean;
- antibacterial, protected from mold;
- high speed of assembly and disassembly without the use of adhesives, solutions, or tools.
Epoxy floors
Epoxy floors are very practical:
- resistant to abrasion and scratches;
- resistant to loads and impacts due to the properties of the material (epoxy resins doped with colored quartz);
- Easy to keep clean, no welds.
Epoxy floors are effective. There are varieties that are homogeneous or similar to granite.
Garage furniture
Before you equip your garage, you need to prepare comfortable places for storing tools and equipment. Often, furniture that is tired of at home but is a pity to throw away is used to store tools. Kitchen cabinets, shelves, chests of drawers are not adapted to the conditions of the garage, the size, weight of the things that will be stored in them. They quickly deteriorate in unheated rooms (especially furniture made from furniture panels), inconvenient, difficult to maintain order.
Old home furniture There may be obvious savings. We will not spend money on garage equipment, but it is worth considering less measurable costs, but important ones - the amount of time and nerves lost while searching necessary tools.
Garage interior, photo
The best decision– special furniture. Furniture is usually made from:
- Tree. Wooden shelves cheaper, less durable than metal ones, do not tolerate high humidity, temperature changes in unheated conditions.
- Metal. Metal furniture works great in workshops.
Storage space does not depend on the size of the room, but on what needs to be placed in it:
- When you need to place several shelves or a cabinet large enough to accommodate the main workshop equipment, you can place them in the back of the garage, using the depth of the room (at least 6.5 m).
- If you need to create a storage room for gardening and sports equipment, you should consider placing shelves and cabinets on three walls. Part of the room can be used for a workshop or hobby.
- If you need to place everything in your field of view, you can select open shelves, install shelves, racks.
- Interesting solution– installation of baskets on rails, elements are mounted on slats bolted to the wall.
- Great idea – horizontal panels installed on the walls, with shelves, baskets, and hooks hanging on them.
- Horizontal wall systems are very convenient durable panels, installed on the wall, in which various baskets and hooks are fixed.
The proposed solutions guarantee optimal, completely safe storage of car accessories, sports equipment, hobby equipment, gardening equipment, tools, items for which you need to find a place outside the home.
Garage design inside - photo
Minimum set of tools
It's probably hard to imagine a car maniac's lair without a jack. Of course, a mandatory attribute is a small lift called a “frog”. Pay special attention to the lifting capacity of the jack. It is advisable to choose lifts with a lifting capacity of more than 2500 kg. It’s worth buying a low-profile “frog”; in the case of lowered cars, you can fit it under the chassis without any problems.
Tools are an important part of garage equipment. The perfect solution– purchase of a set of tools, a tool trolley. Unfortunately, these costs are high. An alternative idea is to purchase individual tools.
Minimum required:
- socket wrenches;
- set of torx keys;
- screwdrivers;
- hammer.
The basis of the workshop is a table on which you can repair individual parts. There should be a vice on the table, when buying which you need to pay attention to the quality of workmanship.
Lighting
It is important to take care of proper lighting. The room must be equipped with large halogen lamps that illuminate and decorate the room. It is advisable to buy hand-held flashlights, which are invaluable when working under a car or hood.
Supplements
Additionally, wall-mounted ditches for instruments, characterized by high strength, are useful.
An alternative to cuvettes is an instrument stand, which, in addition to a number of installation options, offers the possibility of mounting cuvettes and other instruments:
- wrenches;
- pliers;
- hammer.
If the garage owner is mechanically skilled, it is worth investing in the items listed to keep the garage in order. When buying a stand, you need to pay special attention to the load-carrying capacity of the structure.
Worth purchasing:
- soldering iron - will be indispensable for work related to automotive electronics;
- heat shrink connectors;
- cable ties;
- pliers for ties will make their dismantling easier;
- equipment for engine and electronics diagnostics; Unfortunately, professional equipment it is expensive, but it is enough to purchase a basic tester, the price of which is low;
- if the garage becomes a place overhaul, it is worth investing in a compressor, its benefits will be appreciated even during simple operations(for example, inflating wheels), and it is especially useful when unscrewing wheels using a pneumatic wrench.
Garage equipment can be different. Some car enthusiasts prefer one large box, others prefer a couple of small boxes with basic tools. Unfortunately, garage tools are not cheap, so in many cases, planning and landscaping a garage takes many years.
