Armor for insulation. Thermal insulation Bronya is a new ultra-thin liquid insulation. Liquid insulation for work in winter
Ultra-thin thermal insulation is supplied in the following containers:
Modification "Bronya Classic" has a flammability group "G1". If you require a material with a flammability group "NG", then we bring to your attention a similar modification "Bronya Classic NG"
Liquid ceramic thermal insulation coating "Bronya Classic" / "Bronya Classic NG" designed for thermal insulation various surfaces(metal, plastic, concrete, brick, wood, etc.) that do not require increased vapor permeability.
Modification "Bronya Classic" / "Bronya Classic NG" highly effective in thermal insulation of various pipelines(hot and cold water supply, heating mains, steam pipelines, cooling systems, etc.), as well as ventilation ducts, autoclaves, ovens, boilers, boilers, tanks, containers, containers, refrigerators etc. Thermal insulation coating "Bronya Classic" / "Bronya Classic NG" applied to various metal bearing structures For eliminating cold bridges And eliminating the formation of condensation.
This modification is film-forming and therefore it is recommended to apply it one layer (no more than 0.5 mm thick) per day. For example, in order to obtain a thermal insulation coating "Bronya Classic" / "Bronya Classic NG" with a total thickness of 2 mm, it is necessary to apply 4 layers of 0.5 mm thickness with interlayer drying for 24 hours. Apply liquid thermal insulation "Bronya Classic" / "Bronya Classic NG" Can paint brush, spatula or airless sprayer "Graco".
Laboratory consumption liquid thermal insulation "Armor" amounts to 1 liter per 1 sq.m. heat-insulated surface with a layer thickness of 1 mm. When applying liquid thermal insulation to a surface with an area of more than 100 sq.m, it is recommended to allow for an overconsumption of 10% if the application is planned to be done with a brush or spatula. From 10% to 30% (Depending on the professionalism of the painter and weather conditions), material consumption may increase when applied with an airless sprayer.
Application work thermal insulation coating "Bronya Classic" / "Bronya Classic NG" It is recommended to carry out at an ambient temperature of at least +5°C and a temperature of the heat-insulated surface from +7°C to + 150°C. (Applying the first layers to a surface with a temperature above +60°C is done with material diluted with water in a ratio of 50% to 50%)
After the material has completely dried and polymerized, the resulting thermal insulation coating can be used at temperatures from -60°С to +200°С.
Based on modification "Bronya Classic", produced using only imported raw materials, budget modifications are made and. Budget modifications according to your own thermal properties similar to the basic modification "Classic", but have limitation of peak maximum operating temperature +140°C.
Instructions for using the material can be found in the section
- revolutionary insulation technology! Ultra-thin thermal insulation, which has no analogues in terms of thermal protection efficiency!
Thermal insulation paint Bronya
can change our understanding of traditional methods and technologies for home insulation, thermal insulation of pipes and engineering equipment.Modern developments in the field of increasing the efficiency of thermal insulation materials have allowed scientists to create a truly universal thermal insulation coating that surpasses all known insulating materials in its characteristics!
Judge for yourself - just 1 mm of thermal insulation coating Bronya is equivalent in thermal protection to 50 mm mineral wool!
40 times more effective than polystyrene foam or polyurethane foam, but that's not all the benefits of liquid thermal insulation.
Advantages of liquid thermal insulation Bronya:
- environmental Safety, absence of harmful impurities in the composition of the material
- Fire safety, no harmful fumes and gases, warm when heated insulating material
- high efficiency of thermal protection with a small thickness of insulation
- durability, not susceptible to rotting and getting wet
- biological stability, not susceptible to mold damage
- ease of application on any type of surface
- low cost
Ultra-thin thermal insulation coating Bronya is the ideal insulation of the new generation!
In the general public, and even among the builders themselves, there are quite a large number of skeptics who claim that liquid ultra-thin thermal insulation is a figment of the imagination of marketers. From the point of view of such “experts,” a thermal insulation material with such efficiency indicators cannot exist in principle. Such skeptics should be reminded that just recently no one could believe that a person could fly into space, but it happened! Exactly the same revolutionary, breakthrough technologies are being developed in all areas of human activity, including the creation of the latest insulating materials, such as liquid insulation.
Ultra-thin thermal insulation Bronya proved its high efficiency not only in experiments and numerous tests in laboratory tests, when obtaining certificates from leading institutes of the country, but also in practice, when practical use on hundreds of critical construction sites.Liquid thermal insulation Bronya is successfully used at the facilities of such giants as GAZPROM, RZD, ROSNEFT, LUKOIL, as well as in housing construction, housing and communal services, industrial facilities, etc. Gaining increasing popularity liquid insulation Armor among private developers.
Those who have ever used Bronya heat-insulating paint recommend it to all their friends as a unique heat insulator!
Liquid insulation
highly effective for thermal insulation of building facades, roofs, interior walls, window slopes, concrete floors, hot and cold water supply pipelines, steam pipelines, air ducts for air conditioning systems, cooling systems, various containers, tanks, trailers, refrigerators, etc.
Technical characteristics of liquid thermal insulation Bronya:
. Coefficient of thermal conductivity
- 0.001 W/m °C (at +20 °C)!
. Temperature range of application
from -60 to +250 °C
. Environmentally safe, non-toxic, do not contain harmful volatile organic compounds.
. High chemical resistance to alkalis, saline solutions etc.
. Fire and explosion safety
.
Service life - more than 30 years
, without changing the insulating properties!
Areas of application of Bronya liquid thermal insulation:
- Insulation of walls, floors and roofs of residential and industrial buildings
- Thermal insulation metal structures and structures
- Insulation of hangars, warehouses and garages
- Thermal insulation of heating system pipelines
- Thermal insulation of steam and gas pipelines
- Thermal insulation of air conditioning systems
- Elimination of condensation on cold water pipes
- Thermal insulation of water heaters and boilers
- Thermal insulation of steam boilers and heat exchangers
- Insulation of oil pipelines - underground and above-ground, oil storage facilities
- Thermal insulation of containers and tanks for storing water, chemicals, etc.
- Thermal insulation of refrigeration chambers
- Thermal insulation of refrigerators, automobile and railway tanks
- Passenger railway cars and metro cars (heat and sound insulation)
- Engine rooms of ships
- Internal surfaces hulls of ships, submarines, boats, yachts, etc.
Assortment of thermal insulation coatings Bronya:
1. Ultra-thin thermal insulation Armor Standard - basic modification of ultra-thin thermal insulation coatings Bronya - the most economical option for insulation of any building structures!
- 2. Thermal insulation paint Armor Classic- a basic modification of an ultra-thin liquid-ceramic coating with excellent adhesion to any surface! The best ultra-thin insulation you've ever worked with!
3.
Insulation coating
Armor Anticor- a unique ultra-thin thermal insulation coating, insulation paint, which can be applied directly to a rusty surface (it is enough to simply remove loose rust with a metal brush).
Liquid thermal insulation Bronya Anticor is a highly effective thermal insulation coating and anti-corrosion protection at the same time!
4. Thermal insulation paint Armor Winter - a modification that has no analogues, specially designed for work in winter period at negative temperatures. Unlike all other liquids ceramic coatings, presented on the Russian market, work on applying Bronya Zima can be carried out at low temperatures, down to -30 ° C.
5.
Thermal insulation paint
Armor Facade -
a unique thermal insulation coating that can be applied in layers up to 1 mm thick at a time, and has increased vapor permeability of high-quality facade coatings.
- 6.
Thermal insulation putty
Armor Light -
innovative heat-insulating coating, heat-insulating putty for construction and finishing works, intended for finishing leveling of internal and external surfaces of concrete, brick, cement-lime plasters, gypsum blocks and slabs, gas and foam concrete, gypsum plasterboard, gypsum fiber board, etc. , with operating temperatures from -60 to +150 °C.
Thermal insulating putty Bronya Light is a unique construction material, which is based on the use of the latest thermal insulation components.
7. Fire retardant composition Armor Fire Protection - one-component fire retardant coating designed to increase fire resistance steel structures and buildings for industrial and civil purposes. Fire protection of metal structures can now be done reliably and very simply - by simply painting the surface! The fire resistance of structures increases from 45 minutes to 120 minutes! Fire-retardant paint Bronya Fire protection is the latest development in the field modern methods fire protection of structures.
8.Thermal insulation coating Armor Universal and Armor Universal NG - Armor Classic And Armor Standard.
The development of this modification of liquid thermal insulation was caused by the need to offer a cheaper alternative to the already widely known and in demand Bronya Classic coatings. As a result, it was possible to obtain a thermal insulation coating with similar heat-shielding properties, but significantly more economical in cost -20% cheaper!
9.Thermal insulation coating Armor Wall and Armor Wall NG - This is a budget ultra-thin thermal insulation that has similar characteristics to ultra-thin thermal insulation coatings Armor Facade.
More cheap alternative already widely known and in demand Bronya Facade coatings. Our technologists managed to obtain a thermal insulation coating not only with similar heat-shielding properties, but also significantly more economical in cost -20% cheaper!
10.Ultra-thin thermal insulation Armor Nord and Armor Nord NG - this is a budget ultra-thin thermal insulation that has similar characteristics to a thermal insulation coating Armor Winter.
A cheaper alternative to already widely known and in demand coatings Armor Winter. Thanks to new technology and innovative components, it was possible to obtain a thermal insulation coating not only with similar heat-shielding properties, but also significantly more economical in cost -20% cheaper!
11.Insulation coating Armor Metal - This is a budget ultra-thin thermal insulation that has similar technical characteristics to the modificationArmor Anticor.
The development of this modification of liquid thermal insulation was caused by the need to offer a cheaper alternative to the already widely known and in demand Bronya Anticorrosive coatings. As a result, it was possible to obtain a thermal insulation coating with similar heat-protective and anti-corrosion properties, but significantly more economical in cost -20% cheaper!
12.Insulation coatingArmor Anti-condensation
PRO-
Apply directly to the condensing surface!
Other news
Anti-condensation insulating coating Bronya Anti-condensate is designed specifically for use in construction, industry, reconstruction and repair of equipment. The uniqueness of the anti-condensation coating is that it is applied directly to wet surfaces pipelines and equipment various shapes in working condition, if it is impossible to stop technological process, or supplying liquids through pipelines.
read
IN Lately along with traditional thermal insulation materials, it is in high demand. When covering surfaces, the substance simultaneously acts as effective insulation, waterproofing and attractive facade paint, covering the walls with a uniform polymer layer.
One of the most effective in protecting concrete, metal, brick structures turns out to be super thin. Moreover, the material can be applied to both internal and external surfaces, since its components are absolutely safe for health.
Manufacturer
Thermal insulation Bronya is produced by the Volgograd Innovation Resource Center. VIRC has extensive experience in the development of high-tech thermal insulation materials.
All products offered by the company are officially certified and guarantee excellent quality and highly effective results.
When noting the manufacturer, one cannot fail to mention optimal ratio price-quality indicator.
Heat insulator brands
The manufacturer presents several main options for liquid heat insulation.
Bronya Classic is a universal insulating substance that is ideal for processing traditional coatings.
Withstands impact elevated temperatures up to 200 oC.
Effective in insulation metal surfaces.
It can be applied directly to materials that contain signs of developing corrosion processes, without pre-treatment with anti-corrosion substances.
Facade
Bronya Facade - reliably insulates rooms from the inside, without interfering with full air circulation, which avoids the appearance of rot and the formation of fungi.
Armor Winter
The mixture allows you to isolate objects when low temperatures up to -35 oC.
Compound
Liquid thermal insulation includes the following components:
- acrylic binders;
- a composition of fixatives and catalysts;
- special additives, the presence of which helps create protection against the development of corrosion and the appearance of fungus;
- ultra-thin ceramic microspheres filled with rarefied air.
The presence of such a combination turns liquid insulation into an extremely light, pliable substance that reliably covers surfaces. The consistency of liquid Armor is in many ways similar to regular facade paint. However, after complete hardening it forms an elastic polymer coating, which has high insulating and anti-corrosion properties.
Material quality
Bronya thermal insulation prepared for use has the appearance of a viscous, relatively thick substance. The main part of the substance (about 80%) is formed by air-containing ceramic microgranules. Together with binding acrylic polymers, the granules create a viscous mass that can be diluted with ordinary water, thereby creating a moisture-impermeable, lightweight and durable film.
As for the heat transfer coefficient, here this figure is no more than 0.018 W/m2. Currently, this is a record characteristic for liquid thermal insulation materials.
Insulation Armor practically does not absorb moisture. The rate of its absorption with the full content of the insulator in water throughout the day is equal to a scanty 0.02 g/cm3. This quality shows how effective a waterproofing agent this substance is.
The material does not burn, and due to its complex chemical structure it is not damaged by insects and other small pests.
Liquid thermal insulation has excellent adhesion. The material effectively covers any surface: brick, concrete, wood, metal, plastic and even glass. A completely hardened thermal insulator is converted into the thinnest film, which, despite the minuscule width of the layer, reliably protects objects from loss of thermal energy.
One more important point is the ease of application of the insulating base. You can cope with the task using a regular brush, roller, spatula or spray.
As for the consumption of liquid heat insulator, in laboratory conditions this figure is equal to one liter per 1 m2 when the substance is applied in a layer of 1 mm. Depending on the presence of certain conditions, the thickness of the insulating coating may vary.
Options
The technical characteristics of the material are as follows:
- Appearance – homogeneous, smooth matte surface white.
- The resistance of the material to temperature changes is in the range from -40 to 60 °C.
- Duration of operation of the insulating layer when processing metal, brick, concrete surfaces in conditions temperate climate(using the example of Moscow) – about 15 years.
- The permeability coefficient for water vapor is 0.003 mg/m2.
- The maximum permissible operating temperature of the insulating coating when short-term peak values are reached is no more than 260 °C.
- The density of liquid thermal insulation at room temperature is 600±10% kg/m3.
- The pH value is from 7.5 to 11 pH.
- Mass fraction volatile substances– about 40%.
- The time required for the liquid thermal insulation layer to completely harden at room temperature is no more than 24 hours.
- Level of adhesion to concrete, metal, brick surface– ranging from 1.3 to 2.2 MPa.
- Resistance of the insulating coating to water, 5% alkaline solution under conditions room temperature – appearance and the properties remain unchanged.
Areas of application
Liquid insulation Armor is highly effective in insulation various designs. It is used for treating roofs, floor coverings, facades, internal partitions and load-bearing walls, window slopes, steam lines, ventilation, hot and cold supply pipelines, cooling systems, all kinds of plastic, metal, glass containers.
Laying technology
The dimensions of most coatings and the non-standard, complex architectural component of modern buildings increasingly lead to the impossibility effective application traditional thermal insulation materials both inside and outside. For example, perform thorough isolation curtain façade using mineral wool, especially if the housing is located above the second floor, is not feasible for everyone.
With the advent of Bronya liquid thermal insulation, the situation has changed dramatically. The substance effectively fills any gaps in structures, creating a coating whose thickness is about 2-3 cm.
To create a durable, and most importantly, reliable insulating coating, the liquid substance must be applied only after special procedures for preparing the coatings have been completed.
Application of insulation
The ideal tools for high-quality, effective application of liquid thermal insulation are airless sprayers and soft brushes. During the application of the preliminary layer, no more than 1 mm of the substance is laid. The use of a step-by-step economical approach promotes optimal consumption of thermal insulation, eliminating the formation of layers.
Work can be carried out at surface temperatures ranging from -35 to 150 °C. Temperature in each specific case depends on the type and properties of the surfaces being treated, as well as the brand of insulating substance.
Immediately before application ready mixture It’s worth stirring the insulating base in the container once again. If it is necessary to achieve a thinner consistency, a small amount of distilled water can be added.
Finishing
After completion of layering liquid insulator and the substance has completely solidified, you can begin final processing surfaces.
Having dried, the Bronya thermal insulation resembles a coating in the form acrylic paint. Therefore, not wanting to spend additional time on covering surfaces, the walls can be left in their current form.
If there is enough strength and opportunity for decoration, in this case, for facing the frozen liquid insulation you can use a variety of Decoration Materials. As practice shows, it is perfectly applied to such thermal insulation. plaster layer, ceramic tile, wallpaper.
In any case, the service life of the Bronya liquid insulator, due to its strength and ductility, is decades. This, in turn, allows you to avoid finishing work for a long time.
When insulating building facades, various kinds coolants, iron containers and structures, and other structures, special substances are used, which are materials that conduct thermal energy rather poorly. Perhaps the most popular insulation Bronya thermal insulation is considered this type. This material is characterized by its unique composition, which allows it to prevent heat loss even with a layer of 1 mm. What is typical is that Armor is used in almost all events construction plan where protection from low temperatures is required.
Like most similar thermal insulation materials, Armor is a white pasty substance. It should be applied with a spatula or any other suitable tool to the surface. When the material hardens (usually it takes no more than 1 day), a solid is formed. protective layer. It is worth noting that the thickness of the applied layer here depends on what effect is required, although it is often no more than 6 millimeters. The fact is that further expansion no longer entails an increase in quality.
Prices and types of thermal insulation Bronya
The material described can be of four types. The choice of one or the other depends on your specific needs, as well as what is most suitable for your operating environment. Let's get acquainted with each type of heat-insulating paint, consider their characteristics and prices.
"Facade"
The best option, used primarily for external insulation objects. It is applied to the surface in a layer of 1 millimeter, which significantly reduces the time spent on carrying out installation work, for elements under open air. This material is also characterized by the fact that it has high rate vapor permeability.
The approximate cost of 1 liter of material is 390-410 rubles.
"Armor Classic"
The latest thermal insulation Bronya, which is also universal. The paint can be used on almost any surface that requires thermal insulation. Available in plastic buckets with a capacity of 5-20 liters. Typically, all types of Armor are produced in such buckets (with the exception of “Winter”).
Average market value starts from 390 rubles.
"Winter"
This is a unique thermal insulation coating that can be applied even at sub-zero temperature surface to be treated (but not below -35 degrees). Thanks to these characteristics, the paint can be used in winter, and outdoors; The paint itself dries perfectly after application, and crystallization does not occur. This type of Armor acquired exclusively positive reviews. Available in plastic buckets of 10 and 20 liters.
On average, one liter of paint costs about 440 rubles.
"Antikor"
The last type of material being considered today is also a liquid insulating paint. The main advantage of the material is that it can be applied not only to specially prepared/cleaned surfaces, but also directly to a roughly cleaned rusty surface. If desired, this option can be combined with Classic Armor.
Average market value of "Antikor" equal to 430 rubles.
Thermal insulation for water supply and heating pipes
Previously, we talked about how to choose insulating material for pipes and what to do if the pipeline is frozen; in addition to this article, we advise you to read this information
Liquid thermal insulation – what is it?
As is known, most of the scientific developments widely used today in Everyday life, came to us from the space or military industry. And liquid thermal insulation material(which is the described Armor) is no exception, since at first it was used to isolate spaceships.
Any spacecraft is, first of all, a high-precision system; therefore, special requirements are put forward for spacecraft, including:
- strength, low weight;
- ability to withstand low temperatures with minimal heat loss;
- resistance to various aggressive environments, corrosion, etc.
And all this, obviously, can be achieved by using liquid thermal insulation. But what is she? In essence, liquid thermal insulation is polymer composition liquid consistency, which consists of rubber and acrylic based binders, fixatives, catalysts, ultra-thin microspheres of ceramic origin and anti-corrosion additives.
The substance is applied in the same way as regular paint(a layer of 1-6 millimeters, as noted above) on any surface. In liquid form, the heat insulator also resembles paint, but after drying it turns into a durable and at the same time plastic polymer coating, much like a film.
Note! Thermal insulation should be applied in several layers. As for operating conditions, frozen polymer layer can be used at almost any temperature.
If we talk specifically about construction and energy, here Bronya thermal insulation can provide:
Based on everything said above, we can conclude that the scope of application of this insulating material is almost limitless.
Note! It is worth adding a few words about the excellent adhesion of thermal insulation to for the most part materials used today. Thus, some types of coating are so resistant to rust that they can be applied directly to it (but in this case, considerable wet peeling must be removed, for which you can use a regular spatula). There is also water in the mixture and it should be added when the mixture has thickened somewhat from long-term storage.
Where is Armor used?
Thanks to your special characteristics This heat insulator is used universally in various repair and construction sites; and it’s not surprising, because the armor can easily withstand temperatures of both -60 degrees and +280 degrees. If you believe numerous reviews, houses treated with Bronya thermal insulation gain high-quality protection from humidity and cold. With the help of Armor, you can even eliminate sources of heat loss in tanks and heating lines. In addition, this heat insulator can be used to insulate internal partitions and roofing structures, decorate the walls of new premises.
It is also worth noting that when compared with other materials for similar purposes, Bronya thermal insulation has significant advantages, including:
- long service life(may exceed fifteen years);
- the minimum number of tools required to apply the material;
- high rate of adhesion, that is, adhesion to the surface;
- the minimum thickness of the formed layer (this is no more than 6 millimeters);
- Finally, the last advantage is that the heat insulator can be applied to almost all surfaces.
Note! The consumption of Armor mentioned above (meaning 1 liter per 1 sq.m., provided that the layer thickness is 1 millimeter) is an indicator calculated in laboratory conditions. In reality, this indicator may change; it all depends on the specific conditions of use (for example, if the surface is uneven, then the consumption will definitely increase).
Now let's find out about more specific examples of the use of liquid thermal insulation found in everyday life. So, as noted above, Armor can be used to insulate walls, roofs and windows, not only from the inside, but also from the outside. What is characteristic is that the surfaces themselves remain “breathable” after treatment. Thermal insulation is also used in pipelines (not only for hot, but also for cold water), V heating equipment heating stations - both domestic and industrial.
In addition, Armor is effectively used to protect against negative effects external factors environment. This point should be considered in more detail.
- The substance can be used as hydro- and thermal insulation under concrete screed.
- It can also be used as a protective layer for open-air structures and external wall surfaces.
- Finally, Armor is often used as insulation for metal structures of buildings, due to which the possibility of condensation forming on them is reduced to zero.
Video – Thermal insulation “Armor”. Experimenting with ice
How to apply thermal insulation paint yourself
As noted above, Bronya thermal insulation can be applied using a sprayer or a regular brush. During the first pass, a protective layer 1 millimeter thick is laid on the treated surface. This is explained not only by the fact that the most rational consumption of the substance will be ensured, but also by the fact that various types of layers will not appear.
Note! On average, the operating temperature range ranges from -35 degrees to +150 degrees, although a more specific figure depends on what type of Armor you are using.
Immediately before use, the material is mixed directly in a plastic bucket. In order to achieve the required consistency, a small amount of distilled water is added (this is indicated in the manufacturer's instructions).
Video - Applying liquid thermal insulation Bronya
As a conclusion. The effect of the material from the point of view of thermal physics
First of all, we should tell you that thermal energy can be transmitted in three ways.
- Convection is when heat is transferred with a liquid, gas or granular medium due to the flow of the material itself.
- Thermal conduction is when energy is transferred in a solid due to atomic and molecular kinetic energy to a cooler part of the object.
- Thermal radiant radiation or, more simply, electromagnetic radiation. This radiation is emitted by the substance itself through its internal energy.
Thanks to the action of these laws, thermal equilibrium is ensured along the entire perimeter of the thermal system. And the quality insulation material in this case, it is determined by how and how effectively this equilibrium is blocked. Thermal insulation Armor is characterized by a complex multi-level structure, where each method of heat transfer is minimized.
It is necessary to quickly, efficiently, and with little investment of time, effort, and also finances, thermally insulate the roof, floor, walls or pipes in a house or garage, moreover, in a ready-made, constructed room, without reducing it usable area?! Nothing could be easier! And today - this is not a fairy tale or someone’s fantasy, but technology proven over years of space flights - liquid thermal insulation! We will tell you what it is, how and what it is used for, using the example of a unique development by Russian scientists - liquid thermal insulation “armor”.
What is liquid thermal insulation
Everyone knows that many scientific developments, widely used by us at the present time, came to us from the military or space industry. Liquid thermal insulation, originally used for thermal insulation of spacecraft, was no exception.
It is clear that a spacecraft is a high-precision mechanism, therefore increased demands are placed on the body of space rockets, shuttles, and stations:
Withstand low temperatures outer space, reducing heat loss.
- be light and durable,
- resistant to aggressive environmental factors, corrosion, during stay on Earth...
And all this, indeed, can be achieved thanks to liquid thermal insulation.
What is liquid thermal insulation?
Liquid thermal insulation - a liquid polymer composition consisting of acrylic and rubber binders, ultra-thin ceramic microspheres containing rarefied air, catalysts and fixing components, with anti-corrosion additives, applied like paint in a layer of 1 to 6 mm on any materials and surfaces. In liquid form, liquid thermal insulation has the appearance of paint; after application and drying, it becomes similar to a polymer, elastic and durable coating—film. The application is carried out in several layers, and the operation of liquid thermal insulation is possible at almost any temperature.
Liquid thermal insulation when used in energy and construction provides:
-thermal insulation of surfaces and, as a result, a significant reduction in heat loss,
Protection of wooden, concrete and metal surfaces from moisture, acids, alkalis, temperatures,
-protection of people from possible thermal effects of the coolant in pipes, boilers, etc.
-saving space, due to the small but productive thermal insulation layer,
-saving time, due to quick and simple application: we prepare the surface as for regular painting, we apply liquid thermal insulation using a sprayer and a brush, in several layers. Drying time for 1 layer is 1 day.
-saving money. In itself, liquid thermal insulation is not a cheap product, starting from 20 USD. for 1 liter, but the consumption of liquid thermal insulation is 1 liter per 1 sq.m., in the final (multilayer version of thermal insulation). But, thanks to the possibility of applying liquid thermal insulation independently, quickly, without using all the components of the classic thermal insulation “pie”: frame, hydro- and vapor barrier, insulation, - with a guaranteed service life of more than 15 years, it becomes obvious that, after all, liquid thermal insulation is saving money.
Based on this, the scope of application of liquid thermal insulation is practically limitless.
Scope of application of liquid thermal insulation
Let's consider specific examples use of liquid thermal insulation in our daily life:
- insulation with liquid thermal insulation of walls, floors, roofs and window slopes (both outside and inside), while the surfaces are breathable.
-thermal insulation of pipelines (both hot and cold water supply), boilers, heating points, both industrial and domestic scale.
-protection from exposure harmful factors environment:
- used as heat and waterproofing under screed,
- insulating layer of metal structures of the house, which eliminates the possibility of condensation appearing on them,
- as a protective layer on the surface of external walls and structures located in the open air.
Liquid thermal insulation “Armor”: technical characteristics and application
Liquid thermal insulation protects against possible harmful, aggressive effects on the surface of materials, perhaps that is why the Volgograd Innovation Resource Center named its brainchild exactly that - “Armor”.
Liquid thermal insulation Bronya is a Russian analogue of American developments, improved and affordable.
What is so remarkable about liquid thermal insulation armor, reviews of which, on this moment, only positive ones?
A wide range of products under the Bronya brand: “Classic”, “Anticor”, “Winter”, “Facade”, “Light”, with pre-prescribed and tested technical characteristics, make the selection and application of Bronya liquid thermal insulation even simpler and more productive:
Ultra-thin liquid thermal insulation armor is an environmentally friendly and safe product for humans. Moreover, not only during the application process, but also during operation - there will be no burns from touching hot pipes and boilers coated with a layer of Armor!
Let's apply and use:
At the same time, the armor is non-flammable, easy to apply, dries quickly, and can be used for decades without problems.
Liquid thermal insulation or conventional thermal insulation: comparative characteristics
Should I buy liquid thermal insulation armor or not? The issue can be resolved after you familiarize yourself with the results of a small impromptu battle between traditional way insulation and the use of liquid thermal insulation Armor:
