≡× MENU

• Interior
• Window
• Walls
• Projects
• The buildings

Advantages of using fiber cement boards for facades. Facade panels made of fiber cement boards are a practical and durable material for exterior finishing. Fiber cement facade tiles

Everyone has long known that the facade of a house is the face of its owner. That's why everyone strives to do appearance your home is immaculate. I am one of those people too. Having not only a private house, but also the dacha, I wanted to arrange each of them in its own way. Of course, the facades had to be different. Therefore, looking through the options, I decided that I would use fiber cement facade slabs. And below I will write why I chose this option for finishing the facade.

Façade finishing with fiber cement boards

What is the material famous for?

Fiber cement boards are environmentally friendly safe material, and their composition contains up to 90% cement. Thanks to this, they began to decorate not only high-rise buildings, but also private houses and cottages. These panels are distinguished by their high strength, which is achieved thanks to reinforcing fibers and mineral fillers. In addition, the combination of sand, cement and reinforcing fibers makes fiber cement panels not only strong, but also durable, but resistant to corrosion and rotting. And fire resistance makes them even more reliable. I want to say that among all the other facing materials for the house, it was fiber cement products that won my attention, thanks to the huge number positive properties and characteristics.

Facade made of fiber cement boards

Fiber cement facade slabs have the following properties:

1. Fire resistance - in addition to the fact that the panels will not ignite under the influence of fire, they will serve as an insurmountable barrier for it
2. Due to excellent tolerance of low and high temperatures, called heat resistant
3. Cement panels are resistant to chemical and biological influences
4. Not afraid of aggressive environments and mechanical stress

In addition, I liked that fiber cement products are not afraid of open sun rays, and ultraviolet radiation does not affect them in any way. Facing slabs weigh half as much as porcelain stoneware, which means that the load on the house will be significantly less, and reliability and insulation will not suffer from this.

Textures of fiber cement boards

Important! Distinctive characteristic can be called the ability of slabs to self-clean. When dirt gets on fiber cement products, it is destroyed and then washed away by rain or snow.

Having a large number of options for the facade, you can imitate the finish of granite or stone, because specifications maximally convey the colors and textures of the materials they imitate. Of course, installation of slabs is very simple; with a little experience and some skills, you can finish the facades yourself. However, if you are not confident in your abilities, then it is better to leave all the work to professionals; they will definitely not spoil the appearance of the house.

Fiber cement panels for facades

Along with its properties, fiber cement material has a number of advantages, which I highlighted when arranging my façade:

• When making tiles, autoclaving is carried out, and this serves as an obstacle to the formation of limescale deposits
• No special preparation of walls or their adjustment will be required. This type of façade cladding will hide all unevenness and cracks, along with stains and remnants of old paint.
• Fiber cement products are economical and at the same time their quality is no worse than other facade materials
• Installation work can be carried out at any time of the year
• This finishing protects the facade from various weather conditions that are unfavorable. The material is not afraid of UV rays, sudden temperature changes and exposure to microorganisms
• Any projects and design solutions can be done using fiber cement panels. There is a huge selection of textures and colors

Using fiber cement for OSB panels

Very often OSB boards are used for facades. It would be more correct to call them OSB, but using the transliteration OSB, with in English, everyone is used to calling them OSB panels. The use of such materials is possible for various purposes, not only for the facade, but also for the floor or walls interior space Houses. It's very light, but at the same time solid foundation, which became applicable in Lately for the construction frame houses. However, in any case, OSB needs to be coated with something, and depending on the scope of application, the coating may be different.

Fiber cement panels - facade finishing

If we talk about the production of furniture or, for example, covering the floor in a house, then you can definitely paint the surface. But if we are talking about painting OSB, which is located on outdoors, for example if this frame house, then it is better to use another coating that will adhere firmly to the slab and protect it from adverse conditions.
For exterior decoration frame house Fiber cement panels can be used from OSB. By the way, very often OSB panels are used to level the walls of a house and, of course, after that they need to be covered. Simply speaking, for the surface covered with OSB panels, you can use materials that are suitable for wooden board. Thanks to production technology OSB boards quite strong and smooth.

Fiber cement boards for exterior finishing Houses

Installation technology

Regardless of what type of fiber cement boards you choose, the installation technology will be quite simple and straightforward.

I will write the main stages of cladding the facade with fiber cement elements:

• The very first thing to do is preparatory work. I cleaned the walls of the old coating and identified irregularities
• Afterwards, all window sills and protruding objects must be removed, and damage must be removed.
• Next, I placed marks in the places where the brackets will be located. The pitch should be 60 centimeters vertically and 100 horizontally

Installation diagram of fiber cement boards

• Then we install the subsystem. I used metal profiles because I don't trust wooden ones. But this is a matter of your desire
• Before installing fiber cement products, it is necessary to install thermal insulation. You can use fiberglass and secure it using dowels with wide heads.
• Next, I secured the fiberboards with staples, but you can also use nails - it all depends on the thickness of the material. Do not forget that you need to buy slabs with a reserve. Up to 7% of the material used can be wasted during circumcision
• Between the plates you need to fix the strips that will separate them, then you will get even joints. Later they need to be sealed with sealant

Fiber cement boards will improve the facade of the house

Fiber cement boards are a finishing material of artificial etiology. Form of its production: slabs or siding. Facade panels 90% of the composition is cement, the rest is cellulose synthetic fibers, that is, fibers, as well as various mineral additional components. The outer layer of the slab is a weather-resistant coating. It can imitate stone and brickwork.

During the manufacture of this sheet material– these are substances that give the coating the following qualities: the ability to “breathe”, protection from moisture, and resistance to dampness.

Detailed specifications are offered in the following tables.

Physical data

Indicators of physical and mechanical qualities

Name	Unit change	Indicators
Extreme flexural strength, minimum
Density, minimum
Impact strength, minimum	kJ/m 2
Frost resistance, minimum
Fire resistance
Retained strength after frost resistance tests, minimum
Resistance to influence climatic factors At 90 revolutions tests (GOST 9.401): for defensive qualities for decorative qualities		no worse than AZ1 no worse than AD2
Light resistance (conditional indicator)		There are no changes in appearance or color.
Adhesion after weathering	point

When purchasing sheets for exterior cladding of a house, be sure to ensure that they comply with DIN EN 12467 and GOST 8747-88.

Advantages of facade panels made of fiber cement:

1. Excellent protection against aggressive factors (temperature changes, precipitation, mechanical influences).
2. Environmental Safety. The material does not harm either humans or the environment, because it contains no hazardous substances.
3. Ease of installation. It can be carried out in any weather.
4. Rich color palette, choice of textures and shapes.
5. Reasonable price panel.

Flaws:

1. If painting is necessary, costs increase for facades.
2. High level of moisture absorption (about 10%)
3. Appearance inferior to many species external finishes. Although this opinion is ambiguous. Facade fiberboard does not always inspire confidence among designers.

Decor

When studying the appearance, the fiber cement non-combustible panel is divided into the following categories:

1. Imitation of stone masonry. There are many options in this category. The criteria for distinguishing them are as follows: shape, parameters of the “stones,” color, degree of detail, texture specifics.
2. Imitation of brickwork. White, yellow and red variants are often found here, and other colors are less common.
3. Imitation of painted wood. There is more to this category.
4. Fiber cement with stone chips. Their differences: colors, fraction parameters, presence of inclusions.
5. Products of a single color and with a “plaster” texture.

Products of similar colors - facade panels with marble chips. They are less often used to decorate private houses. Fiber cement facade is suitable for both office and multi-storey residential buildings.

Kinds

There is a wide size range in the types of panels. Products from Japanese manufacturers are usually classified into a different category of finishing materials. The length of the Japanese slabs is impressive, for example 182 and 303 cm. And the width is modest: 45.5 cm. Thickness range: 1.2 - 1.8 cm.

Products from Russian and European companies have different parameters (in cm), for example: 77 x 120, 30.6 x 159, 45.5 x 159.3, 119 x 156, 122 x 244, 120 x 150, 122 x 252, 300 x 150, 360 x 150. The interval of their thickness: 0.6 – 1.6 cm.

Japanese manufacturers often coat their products with a glass-ceramic layer. This results in very powerful protection against external influences. Therefore, the prices of Japanese panels made of glass fiber reinforced concrete are several times higher than the prices of domestic analogues. The Japanese are also making more extensive decorative options– about 500 decors. The warranty period for their products is up to 10 years.

Fiber-reinforced concrete slabs may differ in the type of joining edge. Some panels are equipped with clamp plates, while others are not. Panels with such plates have protrusions on the long sides. with clamps it has no visible fastening and looks more expensive.

Fiber cement panels and siding (FP and FS)

FS are wide boards of decent length. Their appearance is similar to rare varieties of wood. To the touch, FS also resembles a natural material. The FS parameters are usually set by the manufacturer himself. Today, two types of FS are widely used:

1. Flat board. It is mounted with an overlap. Imitates it perfectly.
2. A board equipped with a chamfer - a special groove. Thanks to it, installation can take place end-to-end. This view is excellent.

FP are slabs rectangular shape. Usually they look like stone or brick. There are also smooth options for plaster. They look like a plastered wall. This is the facade made of fiber-reinforced concrete.

Differences between fiber-reinforced concrete panels and fiber cement panels

When solving this issue, one conclusion emerges - there are no differences. This is the name of the same material. It’s just that some manufacturers call their products fiber-reinforced concrete, while others call them fiber cement. In practice, these are the same material.

Manufacturers and prices

This is one of the most key issues today. Here, a lot is decided by the purchasing financial abilities and goals. Some people are not looking for special quality and may purchase cheaper versions. For some, quality is a priority criterion, and as a result, expensive Japanese or European options are purchased.

Japanese products come to Russia mainly from two manufacturers: KMEW and TM NICHIHA. They are listed as part of the Panasonic corporation. Their products have highest quality, and, logically, at the same prices.

Among Russian manufacturers The leading positions are occupied by ROSPAN and LTM. However, there are many more modest companies that are trying to achieve Japanese quality in their products.

Buying fiber cement panels is a very responsible matter. Here it is important to choose high-quality, smoothly colored material and not overpay. It is useful to study foreign and foreign products before purchasing. domestic producers. Foreign manufacturers are represented by the brands “Cembrit” and “Swisspearl”, the density of these boards is significantly higher than domestic ones. Some types of foreign fiber cement can even be fixed in a hidden way, onto the Keil bolt, in the same way as porcelain tiles are fastened without visible elements.

Firm	A country	Specifics	Price (in rubles) per 1 sq. m
Cedral	Belgium	Wood imitation. High strength concrete. Very accurate image of fibers.	Minimum 1000
Kmew	Japan	Nanotechnology is used. The panels have a photoceramic coating.	1000-2580
LTM	Finland-Russia	Wide choice: solid slabs for high-rise buildings, versions with self-cleaning coating,	1100-2850
Latonite	Russia	High environmental safety. The production of panels takes place using technology without the use of asbestos.	300-705
Rospan	Russia	Products are manufactured taking into account certain climatic specifics. It has excellent noise insulation.	Minimum 480

Painting fiber cement boards

When choosing paint for fiber cement boards, it is necessary to base it on the existing color scheme of the house, as well as the roof.

At self-painting For such slabs, it is important to comply with the following criteria:

1. There should be no defects on their front sides.
2. Do not fill cracks with putty.
3. After sanding, dust and dirt are removed from the slabs. Compressed air is used.
4. The boards must be completely dry.

Fiber panel painting technology

A diluted fluat fixative is used. To apply it to the front surface of the slab
use a roller or brush. The substance is absorbed in about 15-20 minutes. Next, the slabs are stored for a day in a room with parameters of +18-24 degrees and 50-60% (humidity).

Then the slabs are treated with a special impregnation on both sides. Drying follows. At 50-60C it lasts 1 hour. At 20C – 12 hours.

You need to tint the paint 2 hours before use.

The working tool is an air pistol. Requirements for it: clean and dry. Required parameters for work: pressure 3-4 atm, nozzle dimensions - 1.8 - 2.2 mm.

First apply one coat of paint. It dries up. Apply the next layer. The required wet film thickness is 80-120 microns. If necessary, after drying the final layer, sanding is done.

You can also work using the following technologies:

1. RP – “reduced pressure”.
2. HVLP – “high volume, low pressure”.
3. Combination of applications: air and airless.

Application without air is not permissible!

Drying the slab after painting

After priming, thorough drying follows: the slabs are kept at 18-24 C for 10-20 minutes, then
sent to the dryer. The conditions there are: 40-60C and 50-80% (humidity). Drying period – 2-4 hours.

After painting (colored paint is used), the slab is kept for 10-20 minutes, then again placed in the dryer under the same conditions. Only the drying period is 3-4 hours.

In practice, the final information on the drying period largely depends on the efficiency of the dryer itself. Complete polymerization occurs after 5-6 days. Before this time, installation of slabs cannot be done.

We suggest you read about installing fiber cement boards in a separate article.

The cladding of a building performs not only aesthetic functions, it also contributes to additional insulation walls and protecting them from negative impact environment. Many builders now use fiber cement facade panels produced abroad and in Russia for such purposes.

What it is

The uniqueness of this building material lies in the fact that it combines the most important qualities of facade coverings: strength, lightness and durability. This composite panel, which consists of cement, cellulose and insulating natural fillers.

Thanks to this design, fiber cement coating can withstand high humidity and temperature changes. They are used for installing ventilated facades, covering buildings directly on the wall with glue, and installing them on top of plaster on a frame.

Photo - fiber cement panel

Depending on which facade panels made of fiber cement boards you want to buy, their technical characteristics will change. Always pay attention to impurities in cement mortar, this information is indicated on the packaging of the building material. Some types contain quartz, which significantly increases operational capabilities. Often mica and even limestone are added to the solution (for areas with high humidity).

Advantages of fiber cement panels for house facades:

1. Despite the fact that the material contains cement, the slabs are very light. This perfect solution for cladding houses with strip or pillar foundations;
2. Installation is easy to do with your own hands;
3. Nowadays there is a huge number of different facade panels on the market. You can buy coverings for brick, stone and siding;
4. Durability. Average term operation of fiber cement facade slabs is 30 years. At the same time, they are not susceptible to fungi and mold due to the large number of natural absorbents in the composition and special manufacturing technology;
5. Low cost. Compared to others cladding material, fiber cement is one of the most affordable. It is sold in almost every store building materials, as well as on online trading portals.

But the coating also has its own flaws. Firstly, it does not look presentable on the facade of the building. If you are looking for material for finishing a summer house or utility rooms– then the facade panels are ideal, but for a cottage in the city this is not the best The best decision. Secondly, unlike stone finishing and other natural materials, fiber cement cannot be washed. Exposing it to cleaning products can be detrimental to it.

Photo - Japanese facade fiber cement sheets

Panel production

The technology for manufacturing fiber cement boards is quite complex; for this purpose, a special automatic line. The main materials are cement and cellulose, so their selection and composition is approached with special responsibility. These components are pressed on a rolling table. To obtain such a consistency, it is necessary to apply a pressure of at least 600 MPa to the raw material. Thanks to it, a fairly dense slab is formed with a very fine structure, almost homogeneous.

This is the basis for future facade panels. Repeated pressing is carried out on the constituent natural materials that form the inner layer of the coating. They are also passed through the rolling table. The third stage involves combining two finished coatings and obtaining a homogeneous slab.

Photo - fiber cement sheets under stone

After this, the material is treated with mixtures that will prevent its destruction due to water or wind. The panels are also given a certain appearance. The fiber cement sheets are then painted or varnished and packaged for further sale.

Video: layout of fiber cement facade panels

Installation

As we have already said, such slabs can be installed either on a pre-prepared frame or on the wall of a building. Depending on your needs and capabilities, you can choose any option; this will not reduce the service life of the facade. But the frame is now more in demand, because with its help you can organize a ventilated façade.

Photo - finished facade

Step-by-step instruction how to install fiber cement panels:

Some masters recommend after graduation facade works cover the joints with exterior paint, which will protect the fasteners from corrosion. We recommend inspecting the façade several times a year so that repairs can be carried out in a timely manner if necessary. Pay special attention to sheet joints and corner parts.

Price overview

You can buy facade fiber cement panels in stores official dealers(for example, Japanese Kmew DT-Stone or Chinese Nichiha) or at manufacturing plants, say, Rospan. Naturally, the products of Nichiha and Asahi Tostem (Asahi) are also sold in online stores, but in this case, you will not be able to control the condition of the slabs and their appearance.

It should be noted that the cost of imported coatings is slightly higher than the price of domestic analogues. We suggest considering prices for fiber cement facade panels Latonit P 1500x1200x6, rubles per m2:

Many manufacturers provide services for individual cutting and coating design. This is very convenient for finishing buildings with a non-standard layout.

A variety of facade materials allows you to choose the most best option both in terms of economy and performance.

Fiber cement facade panels for exterior decoration of a house may be of reasonable interest.

They combine the use of classic basic raw materials for production, a modern exterior and convenience installation work.

At its core, this finishing material is a mixture consisting of 90% cement, 10% mineral filler and cellulose fibers. Due to the high percentage of cement content, the panel is as hard as possible. This increases its durability and resistance to mechanical damage.

Filler microgranules solve two problems:

• reduce the weight of the product;
• allow you to regulate the moisture content of the material, reducing the risk of cracking with the onset of frost.

Cellulose fibers give the panels a degree of elasticity, increasing their fracture toughness.

On many samples it is additionally applied protective layer. Protection can be applied either only to outer surface panel or on both sides.

Advantages and disadvantages

There are several main advantages of fiber cement facade panels over their analogues:

1. Mechanical strength. Due to the hardness of the material, it is almost impossible to damage it during installation and operation. This reduces the cost of finishing and increases service life.
2. Durability. The characteristics of the panels allow manufacturers to give them a guarantee of several decades. At the same time, proper installation is quite capable of ensuring a service life of 100 years or more.
3. Fire safety. Fiber cement panels do not support combustion, unlike analogues from synthetic materials.
4. Unpretentiousness to weather conditions. The material can be used in any climatic zones. Air temperature and humidity level do not affect their characteristics in any way.
5. Environmental friendliness. The production process does not use raw materials that emit harmful substances.
6. Variety of texture and color options. Production technology makes it possible to produce panels that imitate stone, brick, wood, etc. The color range is limited only by the design idea.
7. Convenience and ease of installation. The finishing technology does not require the use of special equipment and does not require special skills. Therefore, finishing facades with fiber cement panels is quite accessible to most non-professional craftsmen.

Meanwhile, the material also has some disadvantages:

1. Additives for regulating the moisture content of the material cope with their task only to a certain extent. With constant exposure to water, the humidity level can rise to 10%.
2. Simple installation technology still requires an assistant. This is due to the significant dimensions and weight of the panels.

Production technology

The chain of technological operations in the production of fiber cement slabs includes two main stages: pressing and autoclaving. The compressed mixture has a higher density compared to conventional bulk material.

Due to this, the final product gains greater strength and less hygroscopicity. Along the way, during pressing, the front side of the panel acquires a given relief.

Autoclaving involves treating the compressed workpiece with steam under high pressure . This operation is performed in special devices - autoclaves.

Under the influence of pressure and steam, particles of cement and filler are sintered into a dense solid mass. This increases the strength of the finished panel and also helps protect it from the appearance of limescale efflorescence.
The production cycle is completed by cutting, grinding and painting operations.

Types of fiber cement panels

The following types of panels are most often found on sale:

• under the brick. Imitation brick walls fits well into the design of buildings for any purpose: from country houses to office and production premises. The texture of the panels can imitate either new fired brick or already aged brick. The color can be arbitrary: gray, white, red, terracotta;
• under a stone. Finishing the facade with stone-like panels allows you to create the appearance of stonework on those facades where use natural material is impossible or impractical for economic reasons;
• under the tree. Such facades instill a feeling of warmth and comfort. At the same time, fiber cement is much more practical and durable than natural wood. It does not rot, does not darken and is completely fireproof.

Distinctive features from other species

There are a number of unique qualities inherent in fiber-reinforced concrete facade panels.

Firstly, great mechanical strength. According to this parameter, fiber cement is close to facing bricks. However, the latter is much more expensive, heavier and more labor-intensive to install.

Secondly, the variety of types of fiber cement panels is not inferior to analogues made of synthetic materials. At the same time, fiber cement is non-flammable and much more durable.

Thirdly, this material is very beneficial from an economic point of view.. It has the most attractive combination of acquisition cost, performance and durability.

Specifications

The properties of a particular sample of facade panels of this type depend on the characteristics of its production. The following characteristics are taken as average:

1. Thickness - from 4 mm or more.
2. The maximum panel length is up to 3600 mm.
3. Geometry deviation is no more than 2 mm per 1 m.
4. Density – not less than 1.55 g per 1 cubic meter. cm.
5. Fire resistance class – G1.
6. Frost resistance – at least 150 cycles.

In addition, fiber cement is absolutely light-resistant.

Main manufacturing companies

Among domestic manufacturers of facade panels of this type, the following are the most famous: Brevitor, Fibrit, Latonit, Cemboard, ROSPAN. A special feature of their products is that they can be used in all climatic zones of the country.

In addition, the installation technology of domestic panels has been adjusted to allow work to be carried out in winter.

The Japanese company KMEW differs from its competitors by introducing self-cleaning technology for panels. The facades are treated with a preparation that forms an ideal smooth surface when saturated with moisture. All dirt from such a surface is washed off on its own along with rainwater.

Nichiha is another company from Japan. Its main trump card is its focus on nanotechnology in production, which increases strength characteristics facade panels.
Belgium is represented in our country by Etenit. Its products under the Cedral brand qualitatively imitate natural wood.

Installation technology

All work on the installation of facade fiber cement slabs is divided into a number of technological stages. First, preparatory work and installation of the frame are carried out (photo below):

1. The façade of the building is photographed using geodetic instruments, all irregularities and curvature are identified.. On facades small houses can be used building levels with a large base and plumb lines. Beacons are displayed.
2. Bracket installation. The standard step for installing brackets for panels of the type in question is 60 cm horizontally and 100 cm vertically. The brackets are attached to the walls with dowels, the dimensions and characteristics of which must correspond to the type of wall materials.
3. . Slabs are used as insulation material heat insulating material. Its type and layer thickness must comply with the requirements of thermal engineering calculations. If the insulation is two-layer, then the seams should be overlapped (as in brickwork). The optimal fastener for insulation is disc-shaped plastic dowels driven into holes drilled through the insulation in the wall. For each slab - at least 5 dowels.
4. Installation of windproof film. The same film serves as a waterproofing barrier. Lay it with an overlap of 15-20 cm, ventilation gap should not be left.
5. Installation of horizontal and vertical frames. The horizontal one is assembled from L-shaped galvanized metal profiles 40x40x1.2. Vertical - from U-shaped and intermediate profiles. The pitch of the frames corresponds to the pitch of the brackets prepared for them.

NOTE!

If the total length of the frame edge is more than 5 m, a gap of 3–5 mm should be left between adjacent profiles.

Next, they begin to install the actual façade panels made of fiber cement. It starts from the foundation. The installation technology depends on the thickness of the material. If it does not exceed 12-13 mm, then the optimal fasteners will be 4.2 × 32 self-tapping screws screwed into pre-drilled holes.

The fastening point should be at the location with the maximum thickness of the material. Output it to decorative seam Brick or stone masonry is not recommended.

To avoid chipping of the facade material, the attachment points should not be located closer than 2-3 cm from the edge. It is advisable to paint over screws that are screwed in to prevent corrosion. For thicker panels (from 15 mm) it is advisable to use hidden mounting technology with metal clamps.

That's what they call it fastener, screwed with self-tapping screws to the frame profiles and completely hidden under the facade panel. The use of clamps speeds up installation work and allows you to maintain the integrity of the cement panel.

When fastening the panels, you should control the size of the gap between them and the insulation. The distance should not be less than 40 cm.

When the panels reach the window opening, then first of all a box is formed from galvanized metal profiles. An ebb tide is installed on it. The edge of the ebb should extend beyond the boundaries of the facade by 20-30 mm. To increase mechanical strength low tide, you can lay a board or plywood of the appropriate size and thickness of about 10 mm under it.

Next, slopes are installed. One side of them is attached to the frame of the fiber cement facade, the other - to window box. The joints of the slopes and facade panels are sealed and/or sealed with connecting strips. The technology depends on the material used to make the slopes. If self-tapping screws are used for fastening, they are painted to improve corrosion resistance.

The use of facade panels made of fiber-reinforced concrete will improve the exterior of any building, simultaneously increasing its energy efficiency. The cost of materials and installation costs of a ventilated facade are relatively low. You can reduce the cost of finishing even more if you take advantage of the simplicity of the technology and do all the work yourself.

Useful video

Video instructions for finishing the facade with fiber cement slabs:

In contact with

Creating an attractive appearance for a property worries many property owners. Many are searching for the optimal finishing of facades and prefer fiber cement slabs because of their exceptional reliability.

TD LTM LLC offers to buy fiber cement facade panels for cladding ventilated facades of residential buildings, commercial and administrative buildings. Such products increase the structural reliability of buildings. The panels are 90% cement. Fiber cement boards are made without asbestos, therefore they are absolutely safe for the environment and human health.

Cost of fiber cement facade slabs high density

In stock standard sizes 3050*1195*8 mm.

Order facade panels made of fiber cement

Types of fiber cement facade panels

Products are available in several versions that differ in purpose finishing material. Below are the types of panels.

Characteristics of fiber cement boards

Stages of installation of fiber cement facade panels

• Installation of the subsystem. The substructure is an important component of fiber cement facade panels, the quality of installation of which determines the reliability of the entire facade. The supporting frame is mounted after marking the brackets. For high-quality installation it is necessary to first level the walls, taking into account the degrees of deviation along the entire perimeter.
• Installation of insulation. The material is laid in a staggered pattern to avoid the formation of seams that could come apart, rendering the system ineffective.
• Installation of material. Fiber cement boards are fastened with rivets. Planks (horizontal or vertical) are mounted on the seams.

Advantages of fiber cement facade panels

Quality The panels are manufactured using modern equipment at the TD LTM plant.

High strength characteristics Fiber cement facade panels are resistant to mechanical stress and ultraviolet radiation. The slabs have a hard and dense coating, resistant to fire, moisture, and aggressive substances.

Installation speed Such features of fiber cement boards for facades as big square and low weight, significantly reduce installation time.

Resistance to climate influences Fiber cement façade cladding It is frost-resistant and is intended for regions with different weather conditions.

Environmental Safety The panels are not harmful to health and do not harm the environment.

Innovative equipment is used for the production of fiber cement facade slabs at the TD LTM plant (Moscow). The company is constantly improving manufacturing technologies.

Fiber cement board has no restrictions in its field of application. It can be used everywhere, and wide the lineup allows its use in various fields of construction and finishing. Contact managers to calculate required amount slabs for facades.

Fiber cement panels, photos of objects