Finishing the corridor with panels is the correct way to do the work yourself. Decorating the hallway with panels: interesting design ideas Decorating corners in the hallway with decorative panels
The walls in the corridor are more susceptible to dirt and damage than in other rooms. And if there are pets and young children, then the issue of preserving the decoration of the corridor becomes especially important.
Taking into account the fact that the hallway is the face of the apartment, the following requirements are imposed on the finishing materials of the hallway and corridor:
As with any material, this has its advantages and disadvantages.
Plastic panels
PVC panels (polyvinyl chloride) are a completely artificial material. It does not contain asbestos and cadmium.
Its cellular structure will provide you with good sound insulation:
- A variety of colors and patterns will help bring your ideas for decorating the corridor to life.
- Protective covering will provide resistance to exposure to sunlight.
- Finishing with plastic panels is possible in rooms with high humidity.
- The surface of the panel is easy to clean and completely hygienic.
- Due to their artificial origin, it is not recommended to use them indoors.
Decorating the corridor with MDF wall panels
MDF panels are made from wood dust and fine chips, which are compressed under high pressure and high temperature:
- The panel thickness is up to 16 mm and looks like wood.
- MDF panels are easy to cut, they do not break or crumble.
- Significantly increase the sound and thermal insulation of the room.
- Moisture-resistant panels are available. The moisture-resistant impregnation is indicated by the image of a drop of water on the packaging.
- Panels are also available with fire-resistant impregnation.
- Any room in an apartment can be decorated with such panels, but they look most impressive when decorating a corridor or hallway (see Decorating a hallway with MDF panels: types of panels and installation).
Decorating the corridor with natural wood panels
The most expensive materials for making panels are hardwood and wood finished with natural wood veneer.
The production of wooden panels goes:
- oak;
- beech;
- alder;
- ash;
- cedar;
- maple;
- pine.
To make the finished panels resistant to moisture and fire, they are impregnated with appropriate preparations:
- In a veneer panel, the main layer is made from the cheapest wood - pine. Veneer is glued to it in 2 or 3 layers. The front layer is glued from valuable wood veneer.
- All these layers are fastened together using hot pressing.
- The panel is then polished and coated with wax, paint or varnish.
- Wealthy people can afford to order panels made 100% of hard and valuable wood with subsequent polishing.
Natural wood panels look very noble and impressive at the entrance to a room, be it an apartment or a country house.
Fiberboard (Fiberboard) is made from wood fibers by hot pressing. As a result of high temperatures and pressure, lignin is released from wood fibers.
It is an organic binding agent. And therefore, synthetic binders are not used in the manufacture of fiberboard.
Other fibers of plant origin can be used to produce fiberboard:
- Panels made from fibreboards are environmentally friendly and completely harmless to health. They can be used in residential areas. They are easy to clean and are not very afraid of moisture.
- Fiberboard panels will look great when decorating walls in the corridor and hallway.
Do-it-yourself installation of wall panels
Now let's look at how wall panels can be used interior decoration mount the corridor with your own hands.
Depending on the quality of the walls and the material from which the wall panel is made, they can be mounted in various ways:
- Panels can be attached to glue directly to the wall if the wall is perfectly flat and the panels are not very heavy. These are panels made of fiberboard and MDF.
In this case, the glue is applied to the entire surface of the panel in a zigzag pattern. After which the panel is pressed against the wall.
The adhesive must have elastic characteristics and not interfere with the thermal expansion of the panel. - I haven’t found a method for gluing the panel to the sheathing wide application because of its fragility. Therefore, it should be used as a complement to mechanical fastening.
- The method of attaching the panel to the sheathing with self-tapping screws is very reliable, but it should be used in rooms where there cannot be large fluctuations in temperature and humidity. The fact is that self-tapping screws prevent the panels from expanding when temperature and humidity rise, and this leads to their deformation and warping.
- There is another, most common method - attaching the panel to the sheathing using clamps. With this method, the panel has free thermal expansion and does not deform.
Before starting work on finishing the walls of the corridor, it is necessary to calculate required quantity material. If you know the length and height of the walls of the room, then the store will help you calculate required quantity all materials and fasteners.
Materials and tools
You will need:
- MDF panels;
- wooden beam 20x40 mm;
- finite elements;
- dowels and screws;
- clamps;
- glue “liquid nails”;
- nails 20 mm, for fastening clamps;
- drill with hammer;
- hammer;
- Phillips screwdriver;
- roulette;
- level;
- construction stapler, if you decide to fasten the clamps with staples
Installation of panels
MDF panels are attached to the sheathing, which is assembled from wooden blocks measuring 20x40 mm.
A creative approach to a fascinating but serious repair procedure is welcome. But for this you need to arm yourself with the appropriate knowledge and experience. As they say wise people: only a fool learns from his mistakes
x, and the smart one uses other people's experience. Advice and recommendations from experienced craftsmen are always useful, especially if the conversation goes about the walls in the hallway, finishing options, photos. By listening to wise advice, you can reduce costs and organize the process competently.
3D panels in the design of hallway walls
In terms of traffic level, the hallway is not inferior to either the kitchen or the toilet. Remember this when preparing for repairs. The material for the walls in the hallway must meet the following requirements:
The range of finishing products on the building materials market is huge. It's difficult to choose anything specific. Don't be upset about this, there is always a way out. For example, a successful combination of textures looks quite interesting and provides rich food for design minds.
Clue! Possibility of improvement - main criterion choice. The walls in the hallway are regularly exposed to external influences. Therefore, in case of serious damage to the plane, it is better and cheaper to repair it than to replace it.
There are a lot of alternative variations for decorating the walls in the hallway. To ensure that the finishing is of high quality and looks beautiful, it is recommended that you look at the photographs and choose your own, original method. Before choosing one or another coating, it is worth taking into account the individual characteristics of the room, microclimate, financial capabilities, general style interior It is not advisable to use delicate types of coatings, as the surface will quickly lose its presentable appearance.
Before choosing one or another coating, it is worth taking into account the individual characteristics of the room, microclimate, financial capabilities, and general interior style.
What kind of wall decoration you want in the hallway is a matter of personal preference. But in order not to make a mistake, you need to familiarize yourself in detail with each type of finish separately.
Clue! Before the beginning finishing works, the surface of the walls must be carefully prepared, taking a responsible approach to each stage.
Decorative plaster - practicality and convenience
A popular finishing option allows you to get a certain relief, color or pattern. A variety of texture fillers makes it possible to advantageously present color scheme, for example, marbled, or an unusual relief pattern. The advantages of the material are obvious:
The possibilities of this type of coating are truly endless. Thanks to the granularity of the plaster, you can achieve a beautiful effect for any design plan. But the material should only be applied to a perfectly flat surface. Otherwise, the wall will not look beautiful; every defect of the previous stage of repair will be revealed.
Clue! Decorative plaster is not as easy to work with as it might seem. Only an experienced professional can complete the finishing efficiently and without errors.
Thanks to the granularity of the plaster, you can achieve a beautiful effect to suit any design plan.
Paint - simplicity and accessibility
Even an inexperienced person can paint a room. Special ones are sold for this type of work. decorative compositions, which are easy to apply and stick well. They are divided into categories:
The budget finishing option, in addition to obvious advantages, has some disadvantages.
Clue! Ventilate the room frequently while working and protect the freshly painted object from damage.
Even an inexperienced person can paint a room
Wallpaper - classic option
Adherents of the classics like wallpaper the most. This is understandable, because no other type of finish has such a variety of patterns, textures, and colors. Moreover, different types of wallpaper combine perfectly with each other. This makes it possible to implement the most bold ideas, decorating not only the walls, but also the ceiling.
Wallpaper hides surface defects well, is resistant to wear and is easy to clean. The modern assortment is amazing. Wallpapers are:
- vinyl;
- non-woven;
- liquid;
- cork;
- photo wallpaper;
- paper;
- glass wallpaper.
The latter type, according to experts, is unsuitable for hallway walls.
Clue! If cats or dogs live in the apartment, then it is better not to use wallpaper. Animals can tear them apart and ruin all the work; it will not be possible to restore what is damaged.
Wallpaper hides surface defects well, is resistant to wear and is easy to clean
Wall panels - strength and durability
The composite is ideal for finishing walls in the hallway and hallway. The benefits of coating are difficult to underestimate:
Price for this type finishing depends on the materials used for production:
Wall panels are produced in the form of slats, slabs and sheets. On sale, the product is accompanied by a molding, with the help of which the seams and joints of the parts are hidden.
Clue! The panels are not afraid of dampness, are resistant to mechanical damage and are very durable because guarantee period use is 15 years. The panels can be placed on the wall in different ways: vertically, horizontally, at an angle.
Wall panels are produced in the form of slats, slabs and sheets
Laminate - simplicity and reliability
An analogue to the previous option is laminate. In terms of performance, it is not inferior to competing finishing materials. Main advantages:
There is also no need to prepare the walls for laminate.
Clue! Laminate cannot be used in rooms with high humidity. In damp rooms, the material is deformed and defects cannot be eliminated.
Decorative stone – environmental friendliness and luxury
Decorating walls with stone is an expensive pleasure. Decor is used in combination with other types of finishing materials. Artificial stone is quite durable, not much different from natural stone. One can talk endlessly about its aesthetic merits. A hallway decorated with stone looks amazing. The production is based on gypsum, so stone is considered an environmentally friendly material.
The entrance hall decorated with stone looks amazing
The lower part of the wall in the hallway is finished with stone. This place is most susceptible to wear and tear: household members touch with shoes, large items, such as a bicycle or stroller, leave scratches everywhere. A stone wall will serve you for a long time and faithfully. In addition, if desired, it can be painted; the relief surface will retain its attractive appearance. Repairing or replacing the damaged area is also not difficult.
Clue! To decorate a wall with stone, a flat and smooth surface is required, otherwise it is extremely difficult to join the elements. The wall will be uneven, with steps on the surface.
Tiles - moisture resistance and savings
An old and time-tested finishing method. Ceramic tiles have the following advantages:
High performance will allow you not to think about renovations in the hallway for many years. In rooms where there is regularly high humidity and sudden temperature changes, tiles are irreplaceable. The tile washes well, the pattern does not rub off, plus: the glossy surface visually increases the space.
Clue! Tiles are difficult to combine with other types of finishing materials. You should treat the material as a decorative wall covering very delicately.
An old and time-tested finishing method.
Frescoes - grace and originality
Those who prefer unique finishes will love the frescoed hallway. The architectural painting on the wall looks truly rich and original. Such a hallway will become the secret envy of friends and acquaintances. Walls with frescoes clearly emphasize the non-standard thinking and refined taste of the owner of the house. Elegance, the transition from stereotypes to creativity, quality - these are just some of the aesthetic advantages.
Disadvantages of this finishing material:
- high price;
- difficulty of execution.
Frescoes have several types of bases:
- non-woven;
- synthetic;
- interspersed with plaster or marble chips.
The effect of antiquity is achieved through a cracked pattern and textured chips. The desire to decorate the walls with frescoes is an expression of a romantic mood and creative nature.
Clue! Making frescoes yourself is quite difficult; it is a special technology. But even an inexperienced home craftsman can decorate the walls with ready-made frescoes.
Conclusion
Choosing a wall covering in the hallway is not difficult. It's a matter of taste. And, taking into account the nuances: housing microclimate, humidity levels, quality of finishing materials, you can profitably reduce time and financial costs. The ability to combine, design and imagine will be useful in any situation. Dare and experiment!
Options for wall decoration in the hallway
Walls in the hallway 47 photos of finishing options:
A corridor or hallway is the room where apartment residents first enter when they come home from the street, so dirt and damage are sure to appear on their walls over time. If there are small children or animals in the apartment or house, then the finishing of the lower part of the wall will definitely be in a special risk area. Therefore, when starting a renovation, you need to carefully consider how to decorate the walls in the corridor so that the material is resistant to most mechanical influences.
In addition, it is necessary to take into account the fact that the hallway is usually the “face” of the apartment, setting the tone for the interior design of all rooms, which means that one cannot help but think not only about the strength qualities of the material, but also about its aesthetic side.
A large assortment modern materials, which can be found in construction stores today, gives you the opportunity to choose a finish to suit any request in terms of style and financial capabilities. However, before settling on one of the many design options, you need to consider the positive and negative aspects of the chosen approach.
Wood finish
Wood has not gone out of fashion for many centuries, thanks to its amazing qualities, which create the most beautiful interiors in apartments. favorable microclimate. Wooden ones are suitable for finishing the hallway and corridors. facing materials, produced in the form of lining or panels, depending on the chosen design style.
Natural lining
Wooden lining is a more affordable material compared to natural panels. It is manufactured in various forms, so it is possible to use it to create an interior that matches different styles.
Several types of lining are produced, but all of them are used when decorating a corridor in styles such as “Provence”, “country” or “Russian hut”.
Wood is a material with a structure that does not conduct heat well, thereby retaining it in rooms, so walls covered with it will always be warm to the touch. In addition, such finishing can partially reduce the level of noise coming from outside.
Wooden lining is often called a tongue-and-groove board in another way, although therein lies a contradiction - such a term is more suitable for flooring boards that do not have an external relief. However, a board with a smooth, non-profiled outer surface is often a good material for finishing walls in hallways and corridors.
In addition to the type of profile, lining is classified according to qualitative features - it is customary to distinguish between classes “extra”, “A”, “B”, “C”.
- “Extra” is a lining of the highest class, free from defects and the core of the trunk.
- “A” is a class of material that is also of high quality. In the production of this lining, wood is selected that is allowed to have one knot per 1500 linear millimeters on the front side or edge, as well as up to two blind and small cracks on the back side of the board.
- “B” is a class of lining that is of lower quality, so it can have up to four knots for every 1500 mm, with a diameter of up to 20 mm. Up to two non-through cracks, darkening and stains are also allowed.
- “C” is the lowest class of finishing material. It may have knots up to 25 mm in diameter, several cracks up to 5% of the lamella length, bluish and dark stains, and even mechanical damage. This material has a low price, so it is often used for the manufacture of lathing. If such lining is planned to be used for decorative cladding, then you will have to work a lot on it, cleaning the surfaces and filling in flaws.
Any of the classes is suitable for covering the walls of the corridor, but some of them can be used in natural form, that is, preserving the textured pattern of the wood, while others need to be painted in order to mask the damage repaired with putty.
The lining is made from various woods, both coniferous and hardwood. The most affordable materials can be called pine, linden and aspen, and the most expensive finish is lining made of larch, cedar, oak, alder and ash.
The lining can be installed on the walls horizontally or vertically, depending on the effect you want to achieve. If the hallway or corridor is narrow and long, then it is best to install the slats vertically, otherwise the room will seem even narrower and longer. In a square hallway, the lining can be mounted in different ways, as planned by the design. To give the room originality, you can use combined option fastenings, that is, sheath one wall horizontally, the other vertically, or even combine different directions on one wall.
Natural solid panels
More expensive finishing made from natural wood are massive panels, which can be used to completely cover all the walls, one of them, or they can be used to decorate only the lower areas. For the manufacture of this material, mainly expensive hardwood is used, which has a beautiful textured pattern, such as beech, oak, alder, cedar, ash. However, all these breeds have a high price and are not always affordable for a family with an average income. To reduce the cost of their production, most often different types of wood are combined with each other.
For example, the base of the panel is made from less expensive material- it can be pine or spruce, and then the front side is covered with two to three layers of veneer made from valuable wood species. The veneer is bonded to the base using a special hot pressing technology, which gives the panels increased strength.
Panels are also made from plywood, which is also lined with veneer, and then coated with varnish or wax.
Wall panels, depending on their design, can be used in different styles - classic, classic English, Victorian, modern, neoclassical, rococo and other styles.
Advantages and disadvantages of wood finishing
If we talk about the negative sides of finishing a corridor with wood, then they practically do not exist, since it is devoid of disadvantages, with the exception of the high price of some of its options. But it has many more advantages than any other material.
- Wood has excellent strength and resistance to mechanical stress, therefore, with proper processing and finishing, the claws and teeth of pets are not dangerous.
- The environmental friendliness of wood is undeniable compared to other artificial finishes, so this design can create a favorable microclimate for apartment residents.
- The durability of the wooden finish will allow you to avoid having to renovate the hallway for ten years.
- If you want to change the interior design of the room, the finish can be easily painted in one or more colors.
- Easy to install any type of wood trim, if available necessary tools, allows you to carry out this process on your own.
- Each type of wood has its own textured pattern and color scheme, so choosing exactly the option that the apartment owners will like and will fit well into the intended interior of the hallway will not be difficult.
- Wooden panels, well-fitted boards, and lining go well with a variety of materials, such as wallpaper or artificial stone, so this type of finish provides ample opportunity for imagination when developing an interior project.
Wallpaper finishing
Despite the large number of new finishing materials that have appeared in Lately freely available, continue to be popular, and not only for living rooms, but also for the corridor or hallway.
But, as you know, wallpaper is a fairly thin material that is susceptible to damage and contamination. Therefore, if there is no perverse desire to renovate the corridor every year, then it is best to combine them with more durable finishes, such as wood, plastic, chipboard or MDF panels or artificial stone.
It is especially important to choose a combined option if there are animals in the house. Well, if you live in the apartment Small child, and it is decided to decorate only with wallpaper, then their washable version is best suited.
If previously in stores you could only find paper wallpaper, then today the range of this finishing material is extremely wide. So, non-woven, vinyl, fiberglass, metallized and photo wallpapers may be suitable for a hallway or corridor. You should not choose textile finishing fabrics for decorating these rooms, as dust can accumulate in them, which can cause the development of allergic reactions.
To make a choice, it is worth considering in a little more detail the most popular types of this material.
Non-woven wallpaper
The non-woven version of the wallpaper consists of two layers - a base made of non-woven cellulose fabric, as well as a top polymer coating. This type of material is not strong enough, but can hide small flaws in the walls. It does not shrink when gluing, is wear-resistant, environmentally friendly, and easy to use. self-installation, since when finishing the glue is applied only to the wall.
Non-woven wallpaper is suitable for decorating not only walls, but also ceilings. If you need to change the interior, they can be painted in the desired color.
If a cat can reach non-woven wallpaper, it will happily sharpen its claws on it, so it is best to combine it with high, durable panels.
Vinyl wallpapers
Vinyl wallpaper also consists of two layers - a base made of paper or non-woven fabric, and decorative covering made of polyvinyl chloride, which can have different thicknesses and relief. This coating has many varieties, and one of them, which has become especially popular, is “silk-screen printing”.
Vinyl sheets have high strength and wear resistance, they are inert to ultraviolet radiation and retain their original color for many years. Such wallpaper can be called washable, since it can easily be cleaned with regular wet cleaning. The variety of colors and textures of this material is so great that they can be matched to any interior style.
If this particular finish is chosen to decorate the corridor, then it is not recommended to purchase wallpaper of dubious quality due to its low price, as it can be toxic. The best option for any of the rooms would be non-woven fabrics, as they are “breathable”.
Fiberglass wallpaper
Wallpaper based on fiberglass has increased strength, as it contains strong fibers. This is an environmentally friendly material that can be painted after sticking to the walls with water-based or latex-based paints. Wallpaper is highly wear-resistant, its service life is about 30 years, and during this period it can easily withstand up to 15 repaintings. The material does not crack in the corners when the structure shrinks, it does not burn, is waterproof and is not a breeding ground for microflora colonies.
You can wallpaper the corridor yourself
Many owners have already tried their hand at carrying out such finishing with their own hands. But if you don’t have the relevant experience, then before starting this work, we recommend that you read the article on our portal.
Photo wallpaper
Photo wallpapers are made from various materials– they can be paper, non-woven, vinyl and fabric. For the corridor, it is best to choose a vinyl or non-woven option, as they have characteristics suitable for this room.
The finishing material is also divided according to texture. So, on sale you can find:
— Wallpaper with a smooth glossy and matte surface.
— Relief wallpaper imitating sand, canvas and other fabric weaves, as well as a variety of three-dimensional designs.
This finishing material can be decorated with images with different effects:
- Background photo wallpaper decorated with frequent patterns of floral or other directions, arranged in a certain order. They differ in that they lack a specific plot. Like option will do for decorating a corridor or hallway, but it is necessary to choose washable varieties or combine them with other materials.
Background decoration, depending on the choice of color and pattern, can visually expand or reduce the area of the room being decorated.
- Panoramic photo wallpaper have images of natural or modern city landscapes, balconies or small courtyards. They can also create a room-enlarging effect, so they are ideal for decorating narrow rooms.
- Photo wallpaper with realistic images are also often used to decorate the walls of corridors - these are photographs of flowers, grass, flowering trees and so on. Most often, these canvases have a volumetric 3D effect, which creates the illusion of expanding space, or HD, in which the drawings have the clearest detail.
- Subject photo wallpaper , on which large images of one or several objects are printed, are better suited for rooms with large areas, since in small rooms they will look ridiculous and visually reduce them. This is not the best option for a corridor.
Have you tried to glue photo wallpaper?
The question is not idle, since this finishing operation is quite complex, replete with nuances. To avoid mistakes and spoil expensive material, read in a separate publication on our portal.
Cork finish
An ideal finishing option for the corridor would be cork, which has antistatic properties, is fire-resistant and non-hygroscopic, resistant to deformation, ultraviolet radiation, and, most importantly, to mechanical stress. Thanks to the strength of this material, it is not afraid of animal claws and teeth. Cork is an environmentally friendly material; it is very light in weight, which simplifies its installation on walls.
Cork is a natural material that perfectly soundproofs a room and also makes the walls warm and pleasant to the touch. Cork finishing is produced in different versions - it can be wallpaper, slabs and rolled fabric on self-adhesive base. The color scheme of finishing elements is varied, as it can have a large number of options, both plain and interspersed with different shades.
Cork finishing materials are made from the bark of oak trees that grow in the Mediterranean. Veneer is cut from the removed bark and prepared solid panels, or it is crushed into crumbs with the subsequent production of wall and floor slabs, roll materials, baseless or paper-backed wallpaper. Cork is used to decorate not only walls, but also other surfaces of the room.
In stores you can find cork materials that require additional processing - they have more low price. However, it is better to purchase a finish that does not require additional protective agents, since if you carry out this process incorrectly, you can easily ruin the appearance of the coating.
- Cork panels
Cork tiles or panels are produced on plywood or MDF based, on which the docking locking connections"tenon and groove". This allows you to assemble individual elements into a single covering with almost invisible seams.
Another version of cork slabs consists of three fairly thin layers - the lower one, which serves as the base, the middle one, and the upper decorative one, connected together with natural glue. This finishing material is decorated with cork veneer.
- Rolled fabric
Rolled cork consists of two layers - pressed chips, which is the base, and decorative thin veneer. The canvases are glued end-to-end to the surfaces of the walls and floors. After installing such a finish, the sheets merge into a single covering with invisible joint seams.
In addition to decorative ones, technical cork roll coverings are produced, which are used as substrates for other types of finishing. They are used as an effective insulating and soundproofing material.
- Cork wallpaper
Cork wallpaper has a thickness of 1 to 4 mm. They can be baseless, like a rolled web, or they can be based on paper. Therefore, they are glued to prepared walls in approximately the same way as regular wallpaper, but, unlike them, they are able to mask small flaws on surfaces.
It should be noted that any cork material combines well with other finishes, so various combined options can be developed and implemented.
Cork is well suited for decorating walk-through rooms, both aesthetically and technical specifications. The only thing that can stop you from choosing it is the fairly high price.
Bamboo wall decoration
Decorating the corridor with bamboo is great choice, since this material has high strength and is not afraid of mechanical stress. In addition, it is an environmentally friendly and durable material that does not require complex care and can be cleaned with a vacuum cleaner or a damp cloth.
Bamboo trim is produced in different forms - these can be rigid panels or wallpaper mats assembled from slats of different widths.
- Bamboo panels
To make bamboo panels, whole trunks or halves are most often used, but sometimes they are also assembled from slats glued to the base. They consist of one or two layers, are produced by hot pressing, and can have different dimensions and thickness.
Bamboo goes well with other finishes, such as wallpaper or tiles that imitate flat options stone Most often, panels are used to decorate the lower part of the walls, which are in greater need of them. protective functions. Bamboo is not afraid of cat claws and any dirt - the latter can be easily removed by all available means. The panels are fixed to the wall using “liquid nails”, and installation, as a rule, is not difficult.
- Bamboo wallpaper
Bamboo wallpaper is made from slats into which the inside of solid trunks opens. The thickness of the canvas can vary from 3 to 5 mm. The slats are stitched with a thick, strong thread, which makes them look like mats (which, by and large, they are). Most often, rolls of size 10 × 0.92 m are found on sale.
Another version of wallpaper made from this material has a base made of technical gauze or rice paper, onto which slats are glued, cut from the outer smooth part of the trunk, which is its bark. The width of the planks ranges from 8 to 20 mm, and the thickness is 1÷2 mm. A roll of such wallpaper has standard parameters, its length is 10000 mm, and its width is 2500, 2000, 1500 and 1000 mm.
Wallpaper is produced in different design options - they can be plain or have a natural pattern characteristic of this material.
a natural stone
For its decorative qualities bamboo wallpaper practically not inferior to panels. They can be combined with each other, but to do this you need to choose harmonizing shades.
Bamboo wallpaper is fixed to the wall using PVA polymer glue. Before installing them, it is recommended to level the walls with plasterboard, onto the primed surface of which they are attached quite easily. If the material will be glued to another, more complex surface, then for installation work It is better to use “liquid nails”.
Plastic panels
PVC panels are an affordable and easy-to-install material that can, however, significantly transform any room. Such cladding provides great opportunities in planning your own version of the interior of the corridor, as it is produced in a rich variety of colors, ornamental and relief patterns, with a very reliable imitation of natural materials - the texture of wood, stone, sand, etc.
This material is very popular due to its aesthetic appearance, durability and relative strength. The panels can be easily tidied up using wet cleaning, therefore they are perfect for finishing the walls of the corridor, both the lower part of the wall and all surfaces completely.
If PVC panels are chosen for finishing the corridor, then the repair will take place quickly and relatively cleanly, without unpleasant odors of paint or spilled glue.
Using this material, it is quite easy to level the surfaces of rooms; it becomes possible to hide cables and communication pipes without stripping the walls. In addition, soundproofing material can be placed behind the panels.
Panels produced for interior decoration are an environmentally friendly material that does not emit harmful fumes.
The advantage of PVC panels is that such a coating will not attract animals, since it has a smooth surface that is not easy to claw into.
In order for the finish to meet all the qualities mentioned above, you should not purchase cheap materials. The stiffening ribs installed inside the panel should not be visible through the outer solid layers of plastic, and when you press them with your fingers, they should not wrinkle.
The surface of the panels should not have deformations or dents, and the joining of individual lamellas should be easy, with the tenon completely inserted into the groove.
One cannot help but remember that for finishing corridors and hallways it is necessary to choose PVC panels with a flammability category of G1 or NG. They have a special treatment that makes them more resistant to ignition and melting even when heated to extremely high temperatures. This circumstance must be taken into account in order to emergency situations the exit from the apartment was not blocked by strong and toxic smoke or even open fire.
The process of installing PVC cladding on walls is accessible to everyone!
Any owner who is more or less “savvy” with basic construction skills is able to perform such cladding. Read how it is produced in a separate publication on our portal.
MDF or fiberboard panels
MDF is a wood fiber board produced by dry pressing of fibers using urea resins. The outer side of the panels is decorated with a coating that imitates natural wood different breeds or other natural materials. Some panels are coated with a special protective film- this process is called lamination.
In addition to MDF, fiberboard panels are also available for sale, which have a lower cost, but experienced craftsmen still recommend choosing the first finishing option.
The significant difference between these materials lies in their technical characteristics:
- MDF is more safe material than fiberboard, since the latter uses phenol-formaldehyde resins as a binder, which emit toxic fumes that can harm the health of apartment residents. MDF, from this point of view, is incomparably cleaner.
- The strength of MDF is much higher than that of fiberboard finishing. Such panels are more resistant to external mechanical influences, which is very important for a room such as a corridor.
- MDF, unlike fiberboard, has a water-repellent coating, which allows for wet cleaning of walls without much regard for the frequency of this process.
However, with all its advantages, MDF has a high flammability category - G4, and different models Fiberboard this parameter can be lower - from G1 to G4. Therefore, when choosing a finish, you must pay attention to this characteristic.
Installation of both MDF and fiberboard is carried out in the same way, approximately the same as PVC panels and natural wooden lining: along sheathing guides installed vertically or horizontally.
MDF panels are produced in different dimensional standards. Thickness usually varies from 6 to 14 mm, width from 98 to 325 mm, and they come in lengths of 1300 or 2600 mm, that is, they are perfect for filling the space from floor to ceiling in a standard city apartment.
MDF panels are produced in several variations, which are divided according to production method, characteristics and color features. They can be:
- Whole pressed.
- Laminated with a smooth glossy surface.
- Moisture-resistant, intended for rooms with high humidity.
- Veneered, imitating finishing natural wood or a traffic jam.
- Painted with a special paint that can smooth out unevenness and create a glossy or matte surface.
Fake diamond
Artificial decorative stone is becoming quite a popular material for decorating corridors. They either completely lay out the walls, or combine it with plastered or otherwise decorated surfaces.
Gypsum and cement based stone
The most common one, which is used for finishing, is made on the basis of cement or gypsum using various plasticizing additives. This finishing material can be characterized as follows:
- A wide variety of relief patterns and shades of artificial stone perfectly imitate a wide variety of natural materials.
- Sufficiently high strength indicators guarantee the durability of the finish when the masonry is done correctly.
- If the surface of a stone is accidentally damaged, you can easily restore it yourself, the main thing is to determine exactly what material it is made from. If the base is gypsum, then restoration should be done only with this material (the same applies to cement).
- If you have experience in laying ceramic tiles, it will not be difficult to finish the walls with artificial stone yourself.
- Artificial stone also has several disadvantages:
- Low resistance to abrasion of the material surface. Therefore, it will be necessary to periodically renew the paint or immediately coat the surface of the stone fixed to the wall with a varnish with high surface resistance (for example, polyurethane).
- The cost of such finishing material is quite high.
You can make artificial stone yourself!
If you want to save on purchasing material and try your hand at this craft, the reader should read the article, which is located on the pages of our portal.
In addition to the above materials, more expensive ones are also used for production - they produce a more durable artificial stone that is not subject to abrasion and mechanical damage.
Acrylic stone
This type of artificial stone is made from 75% mineral natural environmentally pure materials, which stand out from white clay. In addition to it, it contains stone chips - this can be marble, granite, jasper and other minerals. Serves as a binder for ingredients acrylic resin(polymethylmethacrylic). The color range is created by special natural pigments that are harmless to humans.
Thanks to all the above components, acrylic artificial stone is a very wear-resistant and durable material, so even such elements as kitchen countertops and sinks.
Quartz stone
Quartz artificial stone is more durable than acrylic, since it contains about 90% natural crushed quartz. It is more resistant to scratches and any other damage, and is also used not only as a decorative finish, but also for making durable kitchen countertops.
The binding material for quartz and color pigments is polyester resins- thanks to these components, the material is stronger than granite. In addition to strength, quartz stone has such qualities as environmental friendliness and resistance to the appearance and development of microorganisms harmful to humans. This material is light in weight and easy to care for, it does not absorb dirt, and it is enough to periodically wipe it with a damp cloth.
Indoor walls, from a technical point of view, have no restrictions, since they are not flammable and do not contain substances harmful to humans. However, it is necessary to show a sense of proportion, otherwise the apartment will resemble some kind of cave. Therefore, stone finishing is most often combined with decorative or ordinary plaster, and sometimes even just with wallpaper.
The stone is most often laid around doorways, or it is used to trim the corners of the room, which will not only contribute to the decorative effect of the design, but also protect the places on the walls that are most vulnerable to damage.
Single inserts of stone on the plastered surface of walls are also possible. The main thing is to correctly think through the color scheme and correct location finishing material.
Now, after familiarizing yourself with which finishes are best suited for corridor walls, it will be easier for the reader to choose the best option, taking into account the quality of materials, design style and, of course, their own financial capabilities. And let the video selection below with very interesting design solutions decoration of the corridor in the apartment.
Video: There is a lot to learn - design options for finishing the corridor
The wall covering in the hallway should not only be beautiful, but also practical. In order for the decoration of the walls in the hallway to be of high quality and tasteful, you should look at the photos with options, choose a material that is easy to care for, wear-resistant and does not stain. It is advisable to choose a wall color that is not very dark, because daylight absent. It is better to select materials that can be cleaned at any time. In addition, it is unacceptable to use delicate materials that will be wiped off by shoulders or bags. Soon they will lose their presentable appearance.
In order to renovate the interior of the hallway with taste, you need to choose options wall covering. To choose it, you need to take into account the design of the apartment. There are the following types of wall decoration:
- wall panels (plastic, MDF, wood);
- covering with laminate and HPL panels;
- use of 3D panels;
- paint;
- wallpaper;
- decorative plaster;
- decorative stone;
- application of fresco;
- tile finishing.
What type of coating to choose is a matter of personal taste and idea of beauty. To make a choice, you need to familiarize yourself with the characteristics of each of them.
3D panels 
Wallpaper 
Decorative plaster 
Laminate on walls 
Plastic panels 
Tiling 
Decorative rock 
Fresco decoration
Wall panels made of plastic or MDF
There is an opinion that materials such as wall panels are most often used in offices. But this is a big misconception. After all, there are many models on the market that have different color, as well as texture. Well-chosen panels, which can be seen in the photo, will look beautiful in the hallway and can create a special atmosphere in the room.
The panels are made of wood, MDF or plastic. The most common option is plastic. It washes well and has good resistance to moisture and sunlight. The nice thing is that it is reasonably priced. The only negative is that this artificial material is not recommended for residential premises. You can replace plastic with a natural material - MDF, which is compressed wood chips.
Tip: The use of MDF wall panels in the interior will provide good insulation of noise into the room, and special impregnation will protect against moisture.
Design with wooden panels is a more noble and reliable option than MDF. This type plays the role of finishing decor. Although it is far from the most budget-friendly. Installation of the wall panel is carried out by attaching it to a metal sheathing with self-tapping screws (for dry rooms) or gluing it directly to the wall (for more humid rooms). If you follow the technology for working with such material, installation is quite simple.
Laminate
As mentioned above, wood gives a presentable appearance to the room. Replacement wall panels made of wood, the walls will be covered with laminate in the apartment, which will be a cheaper option, but no less chic.
The main advantages of this laminate coating are:
- environmental friendliness;
- color and texture of laminate for every taste;
- ease of installation;
- gorgeous view;
- price.
Walls covered with laminate are quite durable if the room is dry. Finishing materials such as laminate coating can be used for walls in the corridor only when there is no high air humidity. Otherwise, the finish may become deformed.
A good replacement for laminate can be the use of HPL panels (or compact laminate). Laminate flooring in the hallway is not afraid of moisture and can withstand large temperature changes. Due to the special production technology of these panels, which uses heat and pressure on the material, the structure does not delaminate during operation. In addition, the surface of the panels is protected with a special coating, which ensures resistance to fading.
3D panels
The use of 3D panels will help give the room originality. They are made of gypsum and are used in rooms where space allows for their installation. The texture of gypsum panels is a wave or stream of air.
By using 3D panels, you can decorate a small section of the wall: around a door or mirror. They are quite easy to install using special glue. The only thing you need to consider if the entire wall is covered is to carefully select the pattern.
Upon completion of work ready material coated with paint in accordance with the interior design. Please note that a primer is applied to the panel before painting. deep penetration. Any paint is suitable: water-based, acrylic, latex or textured.
Paint or wallpaper
The most budget-friendly and simplest option is to paint the walls. This is also a fairly simple method. But only when the walls in the corridor are perfectly smooth. Most often, before applying paint, the surface must be carefully leveled using starting and finishing putty. The advantage of this coating is that it is easy to maintain - the walls are easily washed off dirt. You should choose moisture-resistant paint (preferably enamel). But this coating option will look quite simple in the interior.
But with the help of wallpaper you can create interesting design: cover one wall in one color, and the other three in another. You can keep the color scheme, but at the same time choose wallpaper with a pattern on one of the walls, and plain wallpaper for the rest. Here you can fantasize as you please, but the main thing to remember is to take into account the combination of shades in the interior. It is also desirable that the color of the walls matches the rest of the interior.
Tip: If you choose vinyl wallpapers on a non-woven base, they will be easy to wash and will last quite a long time. When compared with paint, we can safely say that wallpaper will look much better in the interior due to the variety of patterns. In addition, due to their thick layer, they will hide minor defects in the walls, which a layer of paint will not do.
Tile
One of the old and proven methods of wall decoration is the use of ceramic tiles. It has a wide range in its structure and parameters.
The tile is used due to its:
- strength;
- durability;
- moisture resistance;
- practicality;
- frost resistance;
- affordable price.
The high service life of the tiles allows you to not think about repairs for decades. Moisture resistance and frost resistance allow it to be used in rooms with high humidity and temperature changes. Practicality is determined by the fact that it can be easily washed from any type of contamination: splashes from dirty shoes or drops from rain.
Decorative plaster
Decorative plaster is perhaps the most interesting of all. Thanks to its variety of textural, imitation and color properties, it will give the room an amazing effect. In the photo you can see possible options for a relief pattern or marbled effect.
Decorative plaster has the following qualities:
- easy to clean;
- environmentally friendly material;
- sufficiently durable coating;
- can create unusual design in any style.
One of the varieties decorative plaster is microcement. This material adheres to almost any surface: concrete, metal, wood, ceramics. Microcement can create matte or glossy, smooth or rough textures. In addition, it makes the color natural, which makes it stand out from other types of coatings. Compared to traditional decorative plasters, microcement is much cheaper and easier to use.
Decorative rock
The use of artificial decorative stone is quite expensive. Therefore, it is mainly applied not to the entire wall, but to its lower part or around the door. Options for using such material in an apartment can be viewed in the photo.
By appearance it resembles natural stones: granite, marble or others. This material mainly consists of gypsum. Has the following advantages:
- strength;
- ease of use;
- ecologically pure;
- gives an unusual design to the room;
- easy to clean and does not require special care.
By using decorative stone at the bottom of the wall, you can protect the most dangerous areas of the corridor from damage. But the only drawback of this wall covering is its high cost.
Frescoes
The use of frescoes in it will add a real highlight to the interior. In other words, a fresco is an artistic architectural painting. They can be on plaster, on a non-woven base or synthetic canvases, to which inclusions of plaster are added. Frescoes are often created with an antique effect, which is characterized by a cracked pattern or inclusions of marble chips.
In any case, the use of fresco will emphasize the impeccable taste of the owners. For any hallway design style, you can choose the desired fresco, which can be seen in the photo. Main qualities of frescoes:
- environmental friendliness;
- exclusivity;
- durability;
- high quality.
The only drawback is the high cost and complexity of implementation. To make a fresco, the master must have a prepared canvas onto which he applies a textured base. Then the image is applied and varnished. Making such a fresco on your own is quite difficult. But you can easily install it yourself: cover the wall with a primer and glue the frescoes with special glue. This design will allow every guest to plunge into an atmosphere of sophistication.
Where to choose
What covering to choose for the hallway is everyone’s business. After all, for this, cost, ease of installation and maintenance, strength of the material and its exclusivity are taken into account. When choosing a paint coating, you can significantly save money and make your maintenance work easier, but at the same time it will look quite simple on the walls. Designing with stone or using a fresco in the interior will add unusualness, but the cost will be quite high for such finishing materials. Vinyl wallpapers are quite affordable in pricing and with a variety of textured patterns. But their strength is not as high as, for example, laminate flooring or MDF wall panels. The latter, in turn, are quite easy to care for, but are afraid of moisture.
As you can see, each material has its own advantages and disadvantages. To make the right choice, you should take into account the climate of your apartment, financial capabilities and personal preferences. In addition, you need to take into account the color of the coating, which should not be very dark, but at the same time non-staining.
The hallway is the first room of an apartment or house that one enters when returning from the street. From there, dust, dirt, and drops of moisture are carried onto clothes and shoes. All this settles indoors. Pets also contribute their share, so the decoration of the walls in the hallway, in addition to a beautiful appearance, should have high practicality. To renovate a corridor, decorative plaster, paint, wallpaper, panels made of various materials are most often used, and for the floor - porcelain stoneware. Moreover, each coating is installed using a specific technology. It’s good when the lobby is designed in the general interior style of the home. Quite rarely there is natural light in the room, which is also taken into account when choosing finishing materials. Its harmonious design with artificial light is shown in the photo below.
Requirements for covering in the hallway
The corridor and hallway are often identical spaces. This is especially true for small apartments.
The corridor is characterized high level permeability, as for the kitchen and bathroom. This is the guideline by which the coating option should be selected. Before finishing the walls in the hallway, it is necessary to take into account that the material must meet the following requirements:
- be durable, wear-resistant;
- have good moisture resistance;
- have an aesthetic appearance;
- meet environmental criteria;
- differ in ease of care.
A huge variety of materials that are suitable for application to the walls of the hallway in an apartment allows you to practically implement the most modern design ideas finishing.
It is better to choose a coating so that it can be modified during the renovation of the house or if necessary in the future, because the walls in the room are constantly exposed to external factors. It will be more economical and faster to repair individual areas than to change the entire decor. The walls in the corridor and hallway are decorated with similar materials, which is due to the practical identity of the premises. An option for successfully decorating a corridor is shown in the photo below.
Painting walls
Painting occupies a leading position among the options for how to decorate the walls in the corridor economically and quickly during renovation. It's at the same time practical way. You can cover the walls in the hallway using the following types of paint:
- latex;
- silicate;
- acrylic;
- silicone.
The applied layer of finishing dries quickly. The range of dyes in terms of the number of colors is very extensive, and the final coating can be washed.
The paint also has the following advantages:
- ease of application (coloring);
- decorative varieties have a variety of visual effects: capable of copying various materials, changing when different angles color review, create a unique pattern, etc.;
- sufficient degree of wear resistance;
- affordability;
- in the presence of architectural elements complex shape(for example arches or niches) the use of paint is most in a simple way their decoration.
If necessary, it is easy to decorate the walls in a different color.
The disadvantage of painting is the requirement to prepare the base so that it is level and smooth.
Using paint is the best economic option for finishing a hallway during renovation. Painting is one of the best solutions for a small room.
Coating with decorative plaster
Wall decoration in the corridor is often created using decorative plaster. In a hardware store, you can choose a mixture that is suitable for the price and allows you to decorate in a unique and inimitable way.
The walls can be finished to create a smooth or textured surface. Venetian compositions allow you to imitate the texture of various materials. An example of wall decoration using plaster is shown in the photo below.
The advantages of decorative plaster are:
- strength and long service life;
- integrity of the formed coating;
- environmental Safety;
- no special care required;
- good compatibility with other decorative materials.
Some types of decorative plaster can be repainted many times, choosing colors as desired.
The base is leveled with a working solution during the finishing process. Using plaster, structures of non-standard shapes are finished.
The disadvantage of the material is the high cost of some of its varieties.
The layer of decorative plaster covering the base has excellent performance characteristics. The material can be used to decorate walls of any architectural shape, level and decorate corners in a private house or apartment.
Wallpapering
Decorating the hallway walls with wallpaper is another way with a huge selection of varied options. Suitable varieties in order to cover the corridor, are presented in the table below.
| № | Type of wallpaper | Characteristic |
|---|---|---|
| 1 | non-woven | moisture resistant, quite durable, and some varieties can be painted several times |
| 2 | vinyl | washable models are used for hallways, available in a wide range |
| 3 | glass wallpaper | you can repaint and apply various designs using a stencil; it is better to use latex paints |
| 4 | quartz | this fire-resistant material is obtained by applying quartz sand on a non-woven or paper base |
Fabric and paper canvases are less suitable options because they are inferior in their characteristics to the types listed above.
Linkrust is also classified as wallpaper. It is a material with good practical properties, containing a three-dimensional pattern. When glued to the wall, it becomes even stronger over time.
It is believed that it is better to use liquid wallpaper in new buildings, because they will not crack if the house shrinks.
Wallpaper is used to cover either the entire room or individual sections of it. The latter helps to focus attention on individual interior elements. It is possible to apply wallpaper yourself with minimal skills in handling the material. However, certain varieties require special skills and therefore require the involvement of a specialist.
When the work is done well, the laminated surfaces have a magnificent and original appearance.
Wood decoration
There are different options for wall decoration in the hallway. The tree takes pride of place among them.
The walls are covered with clapboard or wooden panels. The first is mounted horizontally or vertically. In this way, the size of the room is changed visually.
Boards and panels are made from various types of wood:
- pine trees;
- oak;
- ash;
- alders;
- cedar;
- beech and other species.
Properly processed material is highly practical. Its advantages are undeniable:
- resistance, strength, durability;
- relative ease of installation;
- natural texture;
- excellent compatibility with other finishing materials for the hallway;
- environmental friendliness.
The boards are good thermal insulation. When used to furnish the hallway of a house, the level of external noise is also reduced. Wood “radiates a special warmth,” but most wood species are expensive, which prevents the spread of this type of finish.
Wall paneling
Wall decoration with panels is widespread. Plastic options successfully applied in practice. Their advantages are as follows:
- low cost;
- a large assortment;
- ease of installation.
But the formed finishing coating can when exposed to ultraviolet rays. Compared to materials used for the same purposes, plastic panels are less durable.
Wall panels also include MDF. It is more durable and environmentally friendly than plastic counterparts.
Laminate cladding can also be classified as this design method.
MDF and plastic panels have low fire resistance. When they burn, toxic substances are released. The rather significant weight of MDF should also be taken into account during installation.
The affordability of panels, a variety of colors and textures contributes to the spread this method finishing. The covering of such finishing materials for the walls of the corridor can be installed with your own hands without the involvement of specialists.
Stone in the interior of the corridor
The design of the walls in the hallway, created using artificial stone, is an expensive design method. It is made from gypsum. Modern products imitate granite, marble, onyx and many other varieties of natural stones.
The artificial substitute is almost similar natural material. It is characterized by:
- significant strength and wear resistance;
- resistance to water and its vapors;
- environmental cleanliness;
- durability, ease of fixation on surfaces.
Naturally, the material does not burn. Before installing it, you must first level the base well.
There is a variety called flexible stone that comes in panel form. This material is created from sandstone applied on a fiberglass base. In terms of its properties, it corresponds to artificial stone with its advantages and disadvantages. The only difference is the high degree of plasticity, which allows finishing areas of complex shapes.
Due to the high cost of artificial stone, they are generally not used to decorate all walls, but only some part, for example, a corner or a doorway. If the room is not fully decorated, it is combined with plaster or paint.
Tiling
For finishing, you can use tiles for the walls in the corridor. Correctly chosen ceramics easily fit into the interior. An excellent combination is formed if there is porcelain tile on the floor.
Surfaces lined with ceramic tiles have excellent anti-vandal characteristics. Tile and porcelain tiles have the following advantages:
- wide variety of colors and patterns;
- resistance to wear, moisture, mechanical stress;
- long period of operation.
Modern tiles can create a coating that imitates stone, wood, leather and other materials. When decorated in some styles, it is the main element.
High-quality laying of tiles is only possible for skilled builders. They are used to cover both the entire room and only a certain part of it. A practical option are tiles at the bottom of the walls and porcelain tiles on the floor. The material is selected taking into account its combination with other interior elements.
Fresco decoration
Frescoes can uniquely and uniquely decorate hallway walls. The completed painting looks luxurious, emphasizing the refined taste of the owner of the house and his creative capabilities. Their undeniable advantages include aesthetics. The fresco is combined with various finishing coatings.
The base for the frescoes can be:
- synthetic;
- with plaster inclusions or marble chips;
- non-woven
Factors limiting the spread of this decoration method are:
- the difficulty of creating a fresco;
- high price.
Creating a fresco requires the involvement of a master, but they are also produced in finished form. Then installing the product is quite simple with your own hands.
The materials used for decorating the walls in the hallway are wear-resistant and resistant to wet cleaning. They have excellent decorative properties and require a different approach to installation. Paint, panels and wallpaper of certain types are among the affordable budget design methods.
Basic materials for decorating a hallway are discussed further in the video.
The following videos contain ideas for decorating a hallway.
Choosing an option that allows you to cover your walls yourself leads to significant cost savings. Practical finish can last for many years while maintaining its original appearance. In addition to the walls, you should choose the right flooring. A good look for a hallway is porcelain stoneware.
