Dimensions of a baby high chair. We sew a mobile children's high chair for feeding (instructions). DIY high chair - some words about wood and paintwork
For every parent, sooner or later the question arises of increasing the functionality of children's furniture. All interior items in the nursery must become real transformers in order to justify the money spent on them and not stand unused. In addition, modern inventions can partially free the hands of busy mothers, turning them into a chair, a swing, or a whole set of furniture.
The first step is to assemble the chair, and then you can move on to assembling the table, which will be much easier to assemble.
Often, such devices can complicate the life of parents while they figure out how to assemble them after purchase. There will be no exception and ordinary children's chair baby for feeding. Of course, it is easy to assemble a high chair as indicated in the instructions, but it is not always included, and even if it is, it is not always clear to the user.
How to assemble a children's high chair "Agu"
All children's stores sell children's furniture in disassembled form, except in cases where the last piece is left on the display. To assemble the Agu model high chair at home yourself, you need to remove all the components from the box, including the Euroscrews with a special key for them. Small parts are already assembled into large parts, which makes the task easier. The easiest way is to start assembling the chair and then move on to the table.
The chair has two armrests with triple vertical wooden rods. The edge to which the rods are closest is considered the front. Connect the armrests with a transverse wooden strip, screwing it with two bolts in front of the armrests, from below. After this, the base for the high chair will be stable. Next, you should install the soft seat of the high chair into the base so that the limiter strap is in front and below. The wooden slats are already screwed to the bottom of the upholstered seat.
Its seat is secured with four bolts, and the back to the armrests with two. Now all that remains is to install the plastic tabletop, which is placed on top and snaps into place with grooves in its bottom on the armrests. On the left armrest there is a plastic adjuster for the distance of the table top. It's time to move on to assembling the table or high chair stand.
To do this, you need to connect two identical parts, reminiscent of the Roman numeral II, perpendicular to each other. On them, the places where the bolts are connected are marked with dashes. Then place the resulting structure on legs and screw the remaining part with a solid wall to form a stable structure. Connect the legs with two jumpers and secure them with bolts. This completes the assembly.
To make the high chair higher, you need to turn the table with the tabletop back and place the chair and plastic tabletop on top. To make a set, lower the chair to the floor again, remove the plastic tabletop, and move in a table with a wooden tabletop.
Return to contents
How to assemble a baby high chair “Baby” with your own hands
Initially, you need to remove all the feeding parts from the box and lay them out on the table. You can immediately note that there are much more individual parts than in the previous example, but each of them is numbered - table parts with numbers from 2 to 9, chair parts from 11.
Euroscrews with a key should also be included in the kit. To start assembling a high chair, you need to arrange all the components in numerical order into table and chair parts separately. Then you need to align and bolt the parts with the holes numbered the same numbers, starting from 12. Then connect the parts with mark 13. Next, fasten the holes numbered 11 and 14, respectively. After this, you should get a part consisting of four separate elements.
Assemble the second part in the same way, alternately connecting the same configurations of numbers, then connect these parts with a crossbar.
Now you can assemble the high chair by screwing it to the received wooden base a soft seat, while the crossbar should be under the child’s legs, and the limiter strap should hang down. The seat is secured with six bolts. The last step in assembling the high chair will be screwing wooden table top two bolts to the armrests. An additional hole in the armrest will allow you to easily adjust the position of the tabletop in the future by moving it away or moving it closer to the child and twisting it.
Thus, the high chair is assembled, all that remains is a stand or table for it. The logic for collecting is the same. Select four elements with cell numbers 3 and screw them together. The result should be a part in the shape of the letter H. The second similar part should be twisted in the same way from four elements according to the numbering of cells 3. Only the attachment of the last element of the part will differ; it will be numbered 2 and will not be twisted joint to joint, but as a result of superimposing one strip on another.
All that remains is to assemble the feeding table by connecting all the large parts. First, you need to combine the table top with the leg, twisting the cells with numbers 5. Add the third part and twist the cells with numbers 6. Secure the resulting structure with two wooden planks with cell numbers 4. After assembly, be sure to check the strength of all connections, additionally tightening them with a wrench. It is not recommended to tighten the bolts too tightly, as this can shorten the service life of the product and increase wear on threaded connections.
To make a high chair for feeding a child, a chair with soft seat needs to be installed on a table, and its tabletop should be under the legs in front or behind, at the request of the parents. And to get a set of furniture, you need to lower the chair, for convenience, unscrew the small tabletop from it and move a large table on the floor.
With the birth of a baby, his parents have a lot of worries. One of them is purchasing a high chair. Meanwhile, it is quite expensive in children's stores. In order to save on its purchase, you can try to make a high chair with your own hands. By and large, there is nothing complicated here. The main thing is to adhere to the recommendations presented, act step by step and carefully study the drawing.
The main thing to remember when making a high chair for a child is safety. The structure must be strong and stable.
Making a wooden high chair
Before making a high chair, you should prepare the following tools and materials:
- saw;
- hammer;
- beams with a section of 400x200 mm;
- board (thickness 20 mm);
- fiberboard sheet;
- nails;
- batting;
- dowels;
- textile;
- glue;
- brush;
- sandpaper;
- gloves to protect your hands from splinters during work;
- plywood.
You will also need to purchase paint and varnish material. But you need to choose a non-toxic one. The one that has acrylic base. Such paints are modern and safe.
Return to contents
Stage 1: making parts
You need to start making a high chair by making parts for it. You will need to do the following:
- 4 legs (length 390 mm);
- 2 lower crossbars (length 340 mm);
- 3 crossbars (length 300 mm);
- top bars(length 220 mm);
- 1 small tabletop (dimensions 200x340 mm);
- 4 rounded elements.
To make such parts, you need to take the bars and saw them in half. From these, the legs are first created, then the upper and lower crossbars, and then the crossbars. They will need to be treated with sandpaper to prevent the baby from getting splinters, because he will grab all the parts of the chair with his hands.
Now you can move on to creating rounded elements for the sidewalls. They need to be cut out of a board to get the most durable and reliable chair; a drawing of these parts is presented.
It will definitely be necessary to do this wooden board similar markup. The diagram must be drawn so that the fibers of the material are located perpendicular to the bend angle. Then the finished part will not lose its strength over time.
The back and seats need to be cut from fiberboard. You will need to make 6 parts from it. Their size should be as follows, 300*250 mm. Their two corners should be rounded. The ends of such parts will need to be thoroughly sanded. After which you will need to glue 3 identical parts together and then put them under a press. The last thing you need to do is cut out the plywood tabletop. Its size should be: dimensions 200x340 mm.
Return to contents
Stage 2: we assemble the high chair
Now you can start assembling the high chair. You will first need to make rectangular dowels. They are carved from wood. Their size should be 8*20*50 mm. Under them, you will need to make holes in the parts up to 40 mm deep.
They will need to be fixed with glue, and then additionally with nails. But it will be necessary to recess their cap into the surface of the wood - this will prevent the child from causing injuries and cuts.
You should start assembling the high chair from the side. It consists of 2 rounded parts, legs and lower crossbars. First of all, the last 2 parts are fixed together using glue, dowel and nails. Here it is necessary to ensure that the connection occurs at an angle of 90 degrees. Then you can assemble the top crossbar and 2 curves together. The second sidewall will need to be made similar to the first. In this case, during assembly it will be necessary to compare both elements several times to make sure that they turn out identical. The created sidewalls will need to be sanded.
Next, you will need to connect the seat and backrest together. Here you can use screws and a corner. After which you will need to wait until the glue on all parts is completely dry, and then you can assemble the entire high chair.
The sidewall is connected using crossbars (length 300 mm) and dowels. You will first need to make holes for them. Then the structure is additionally fixed with nails. Then you will need to attach the legs to the lower and upper slats, and then install the crossbars. A tabletop is fixed at one end.
After that finished design additionally processed with sandpaper. Then she covers herself paint and varnish material and left to dry. Then you will need to cover the seat and back with fabric. But first you will need to lay batting under it and secure it with a stapler. This covering will allow the baby to sit on the high chair with maximum comfort. This will complete the work on its creation. This means you can use finished product as intended.
Return to contents
How to make a mobile high chair?
It is not always possible to take with you wooden chair little bottle for feeding a child. After all, it is quite large and cannot be transported. And here many parents may have a question: how to do mobile high chair for hand feeding? Here also without step by step instructions can't get by. But first you will need to prepare the following:
- fabric (cotton, linen, lining fabric) - about 3 m;
- slings – 2.5 m;
- carabiner buckles – 3 pcs;
- thick and durable braid – 3 m;
- scissors;
- needles;
- threads;
- sewing machine.
Purchased furniture for a child’s room, especially from natural materials, can be quite expensive. In a store or online, you don’t always find exactly the option you like. High chair and you can create a wooden table yourself. The work will not be difficult if you prepare all the necessary parts and tools, use your ingenuity and imagination. The reward for the work is a unique product, as comfortable as possible for the baby and practical in home life.
You can create a children's high chair and table from wood yourself.
A DIY chair will cost much less, and one made according to your own sketch will meet the intended parameters and the required degree of comfort for the baby.
The reward for the work is a unique product, as comfortable as possible for the baby and practical in home life.
All natural wood parts can be purchased in specialized departments of construction stores. They will select boards and bars of the required sizes for you.
A DIY chair will cost much less.
A children's highchair, created with one's own hands, is high-quality furniture for a child. In the process of work, you take into account the dimensions of the seat and backrest, which are as comfortable as possible for a growing baby, and check the strength of the structure directly at home.
All natural wood parts can be purchased in specialized departments of construction stores.
A wooden chair created by yourself can be decorated to your liking, and not be satisfied with ready-made solution purchased furniture.
They will select boards and bars of the required sizes for you.
Required materials and tools
To create a chair you will need various materials. They will be used to make individual parts. First of all, this wooden blocks and boards from which the frame, seat and back are assembled. Instead of natural massif For wood, you can use chipboard or plywood, but these materials are short-lived. For fastenings, take sufficient self-tapping screws. You will need medium-hard sandpaper.
A children's highchair, created with one's own hands, is high-quality furniture for a child.
Dimensions of bars (length):
- support legs – up to 20 cm;
- seat frame connecting strips – up to 20 cm;
- backrest lintels – up to 20 cm.
A wooden chair made by yourself can be decorated to your liking.
During the manufacturing process, the thickest bars with a cross-section of 5x5 cm are used for the legs. For the planks, parts are taken with a diameter half the size of the supporting ones.
For the planks, take parts with a diameter half the size of the supporting ones.
The parameters of the seat board (height and width) should also not exceed 20 cm. The back part may be slightly higher, but preferably no more than 30 cm.
- they are less durable;
- The environmental friendliness of such products has not been 100% proven.
The parameters of the seat board (height and width) should also not exceed 20 cm.
To make a chair with your own hands, you need the right tools:
- screwdriver;
- screwdriver;
- jigsaw;
- hacksaw for wood.
The dorsal part may be slightly higher, but preferably no more than 30 cm.
The assembled chair will “require” original decor. In addition to the carved option, you can use paint or other materials to apply a design or appliqué. To accurately apply the image you will need a stencil.
The assembled chair will “require” original decor.
Deciding on design and construction
For a wooden product, you can come up with any option. A highchair is usually made with straight supports and the following forms of the back structure:
- solid square or rectangular;
- wide truncated cone;
- straight through (with jumper bar).
To accurately apply the image you will need a stencil.
Creating a product with your own hands requires careful preparation. You must first make a sketch of the project. Visually draw a diagram of the connections of all parts separately with calculations of sections and lengths. Following the sketches, you will recreate the model in reality with exact parameters. A chair that has all the right dimensions will fit the baby and will not create any inconvenience.
For a wooden product, you can come up with any option.
Certain models are created with the expectation that the child will sit at a common table with other family members. In this case, high legs are chosen for the product, which are not attached exactly vertically in relation to the seat and floor, but more widely. The lower part of such a chair will look like a truncated cone, connected for stability by wooden blocks around the perimeter. The top part will be approximately 30-35 cm below the table level.
A children's high chair is usually made with straight supports and the following forms of the back structure
If you have certain skills, you can assemble a folding product. Such items can be easily removed if necessary into storage areas.
For selected design solution parts are processed in accordance with it.
Manufacturing process: step-by-step instructions
After preparing a drawing with exact parameters, we begin to assemble a simple children's high chair.
- Calculate the length of the legs exactly according to the diagram, saw off the excess with a hacksaw.
- Cut out the jumper bars to size that will secure the frame in the seat area.
- Connect them with supporting structure. Add furniture glue for reinforcement.
- Attach the pre-sized back and seat using self-tapping screws.
- All wood parts must be cleaned with sandpaper to avoid roughness and burrs.
A chair that has all the right dimensions will fit the baby and will not create any inconvenience.
If the parts are disproportionate, “adjust” them according to the design diagram using a hacksaw. To make the chair you created with your own hands comfortable, ask your baby to sit on it, ask how comfortable he is.
If all sizes were determined correctly, the child will like it new furniture. To ensure the parts are smooth, sand the surface again.
Certain models are created with the expectation that the child will sit at a common table with other family members.
To varnish the product, use only safe compounds - a special coating for children's furniture, environmentally friendly and having the appropriate certificate.
The top part will be approximately 30-35 cm below the table level.
After exterior finishing varnish, let the chair dry thoroughly for a day or two. Then you can start decorative finishing, if such is intended. If it involves carving, then varnishing is done after finishing the artistic treatment and sanding the parts.
Decorating a chair
Use a jigsaw for carving. You can make a decoration in the form of a flower, cutting it out in the center of the back, or any geometric shape. First, mark the area of the future decoration with a pencil so that the carving is even. Parts such as legs and back can be carved. The corners of the seat can be rounded using a jigsaw and sandpaper.
During the manufacturing process, the thickest bars with a cross section of 5x5 cm are used for the legs.
The top can also be made not strictly rectangular, but a truncated cone, rounded, compound. In the latter option, you will need additional bars and cross bars - one or two. They are secured by special holes at the junction with the dorsal frame. It's pretty labor-intensive process, but if you wish, you can choose this option.
For fastenings, take sufficient self-tapping screws.
All steps for processing parts must be performed before the chair is assembled - this way the work process will be faster, more convenient and neater.
If you have certain skills, you can assemble a folding product.
To make a home-made piece of children's furniture look more interesting, you can apply a design to the back and seat. To do this you need to use safe paints. The color scheme should be bright and cheerful. Simple ornaments, floral patterns, and imitation of children's toys, such as cars, look great on wooden furniture.
Instead of natural solid wood, you can use chipboard or plywood, but these materials are not durable.
Due to the fact that the size of the product is small, a large pattern will become a kind of accent that attracts the child’s attention - he will like to sit on such a beautiful chair, play games or have breakfast.
You can use appliqués for decoration – there are plenty of adhesive bright films on sale.
The image will turn out smooth if you use a stencil pre-cut from paper or thick plastic.
You can use appliqués for decoration – there are plenty of adhesive bright films on sale. Whether the image will be monochromatic or multi-colored depends on your imagination.
First of all, these are wooden blocks and boards from which the frame, seat and back are assembled.
It is not recommended to use bulky (protruding) parts, both small and large, in finishing the seat or back of a children's chair. Firstly, it is inconvenient for the child, and secondly, they quickly fall off when frequent use products.
To create a chair you will need various materials.
VIDEO: DIY high chair
One of positive points, going in favor wooden furniture, this is what it’s really like to make a wooden high chair with your own hands. Naturally, in the case of twins, you will have to do two stools at once. Note that usually homemade children's high chairs made of wood come in different types - classic folding, transformable and growing.
In this article, in the “for dummies” style, we will tell you how to make a high chair with your own hands using the example of a wooden transforming chair. We will show two working options for a do-it-yourself feeding table-chair with drawings and dimensions, and also give some considerations about them.
ATTENTION!!! The article turned out to be long, since we are writing not only for experienced craftsmen, but also for beginners, as well as people who rarely do anything with their own hands. If you don’t want to read everything, use the table of contents. Heading tooltips will help you understand what it's about and choose what you need.
If you want to make a high chair with your own hands, but not a transformer, or you know everything - how to do it and like brevity, it’s also not a problem. Over time, a link to a post will appear in this place, where information about homemade high chairs will be collected in one pile. In the meantime, look at the site map and section, there are articles there.
Contents of the article:
Do-it-yourself highchair - why a children's wooden highchair TRANSFORMER. MOTIVATION
One of the big advantages of children's wooden transformable feeding chairs is that the design of the chairs is extremely simple, so even a beginner can easily build them on their own. You can make such a high chair with your own hands either from scrap materials, or you can easily purchase the material at a low price.
In the article DIY baby high chair, we looked in detail at how a folding high chair is made. It turned out that it is done quite simply. But its relevance is very doubtful - wooden furniture is always bulky and heavy, and after two years such a chair will have to be disassembled for parts and made separately children's table and a chair.
But the transformable chair immediately “kills” two birds with one stone: it is both a chair and a table-desk. First, the chair is used for its intended purpose, together with a small table, and then, after 1.5 years, it is disassembled, and the child gets a separate desk and chair. Convenient and practical. Perhaps this is precisely what arouses constant interest in a wooden transformable high chair made by hand.
All that remains is to figure out how to make such a miracle of technology yourself. First, let's look at a video of one of the craftsmen.
Do-it-yourself feeding chair or transformable wooden high chair for feeding a child with your own hands getting started
Searching the Internet on the topic of a do-it-yourself high chair, it will become clear that there are two options for a transforming high chair.
The first option is more complex, but for some reason it is the one that is popular on the Internet. Most likely, once someone made a wooden transforming high chair for feeding with their own hands in exactly this way, and then articles on how to make it yourself miraculously and thoughtlessly multiplied. Therefore, where to get the right option is not clear. We present here the most understandable (for the author) description and sane drawings.
The second version of a do-it-yourself feeding chair is simpler and more logical; it is the method used to make factory-made wooden transformers. And we will also present it here, with our own measurements.
If everything is clear with the material and you are only interested in drawings and dimensions for a do-it-yourself high chair, then immediately go below to the parts of how to make a high chair with your own hands - Option 1, and How to make a children's wooden high chair with your own hands - Option 2. A For now, since we decided to write a story in the “for dummies” style, let’s talk about the materials used.
DIY high chair - Materials
To make a high chair with your own hands you will need wooden blocks. A board with a thickness equal to the thickness of the bar used can be added. Plywood or chipboard, self-tapping screws, glue, washable fabric upholstery and any soft filler. Well, also staples for a construction (furniture) stapler.
You can use any timber that is sold or available. It would be better if it were planed. So there is less fuss with him. Otherwise, you will have to plan it yourself and make it smooth. It is most convenient to take a timber size of 20x30 mm.
As a table top for a desk table and a small removable table for a high chair, laminated chipboard or thick plywood - from 10 to 15 mm thick - will be used.
The hard parts of the back and seat of a do-it-yourself feeding chair can be made from fiberboard or plywood. It is not necessary to use thick plywood; 5 to 10 mm thick is sufficient. In general, plywood will be stronger, but the staples of the stapler fit into the fiberboard easier.
Some parts are glued together. To do this, you can use wood glue or just PVA glue.
To do soft back and sitting on a high chair with your own hands, you will need external upholstery - durable, easy-to-clean fabric, such as raincoat fabric or bologna, or just oilcloth, and inside there is soft filling - foam rubber, batting, padding polyester or something else. See for yourself how much you need. The soft filler can be glued to the hard parts of the back and seat, or simply fastened with a construction stapler, or you can combine both options. It’s easier to immediately fasten the upholstery with a stapler. It will be more reliable this way. The size of the staple depends on the stapler and the selected thickness of upholstery.
It’s also a good idea to have a medium sandpaper to sand the parts and make them smooth.
In the first version of the do-it-yourself high chair, only 4 wood screws are used: to attach the table top to the desk table. Everyone else wooden parts connected to each other with homemade dowels, also made of wood. You can use the remaining bars on the dowels.
In the second version of the do-it-yourself feeding chair, there are practically no dowels, but there are many self-tapping screws for fastening all the parts together. Factory transformers are made using Euro self-tapping screws, and a children's wooden transforming highchair for feeding with your own hands can be assembled using any type. The main thing is to assemble it correctly. Dowels are used only if you decide to make rounded parts that are convenient to attach to the bars with their help.
In both versions wooden table and a do-it-yourself feeding chair have rounded elements, although you can do without them. These elements can be made either from a board with a thickness corresponding to the thickness of the bar used. If the beam is taken, as here, 20x30 mm, then we take a board 20 mm thick, but 30 mm is also possible, it depends on how you lay the bars, just kidding). If there is no board, then the same bars are perfect. You just need to glue them together.
Depending on how many and how you arrange the rounded elements for cutting on the board or glued bars, this is the length of them (boards, bars) you should take. 4 elements must be laid at once on glued bars or boards. Therefore, the length will be from 0.5 to 1 m, and maybe 2 m will not be enough.
DIY high chair - some words about wood and paintwork
I suggest you pay attention to the wood material of the high chair. Let us immediately note that it is best to make a children’s wooden feeding chair from linden with your own hands. However, like any other children's furniture for kids. Since they are often used in the manufacture of wooden furniture conifers trees may not be suitable here: pine produces resin, which is very toxic. It’s better not to risk children’s health. However, construction stores often stock pine, so we try to take it as dry as possible and without any resin. Believe me, it will be better for the child, and it will be easier for you to do it yourself.
For added shine, color and protection environment It is better to use ACRYLIC varnish or paint. It is not as harmful to the baby as the others. Why him? The answer is - what if the baby tries the table or high chair that you made with your own hands? You are responsible for the consequences. Although, if this does not bother you or there is no way to get them, then you can cover the feeding chair with your own hands with whatever you want.
Do-it-yourself wooden transformable baby high chair - Option 1
To understand what a do-it-yourself high chair in the form of components Option 1, we provide drawings and dimensions.
To make parts of a wooden transformable baby high chair with your own hands, take a beam with a cross-section, for example, 20x30mm. We will make the following parts from it. We indicate the length and quantity.
- Legs – 390 mm, 4 pcs.
- Rounded parts – 4 pcs.
- Armrests, also known as the upper crossbars of the chair – 195 mm, 2 pcs.
- Planks running parallel to the armrests, also known as crossbars, 335 mm, 2 pcs. We will then attach the seat with the crossbars of the feeding chair to these crossbars
- The slats on which the seat and backrest are attached, also known as crossbars – 300 mm, 3 pcs. Two for the seat and one for the back
- Small table on a chair (H x W) 340X340 mm. It lies on the armrests of the chair 340 mm = 300 (length of the chair crossbar) + 20 + 20 mm.
- The seat and back have the same dimensions (H x W) 250 x 290 mm. Width 290 mm = 300 (crossbar length) – 5 – 5 (gaps on both sides for upholstery and soft filling), mm.
- Legs 500 mm 4 pcs.
- Planks for the lower and upper parts 410 mm 4 pcs. There is a feeding table on the lower slats, and a table top is attached to the upper ones.
- Cross bars 340 mm 4 pcs. To fasten the sides of the table. Length 340 (mm) = 300 (chair crossbar length) + 20 + 20 (mm). This is done so that the chair fits between the sides of the table.
- Tabletop (H x W) - 440×380 mm. 1 piece The tabletop rests on the upper slats and does not protrude beyond the sides. Width 380 (mm) = 340 (crossbar length) + 20 + 20 (mm). Length 440 (mm) = 410 (top bar length) + 30 mm
How to make a high chair with your own hands
Work begins with a chair. To do this, bars are cut to the required length according to the dimensions. Separately, you need to make rounded parts - they connect the legs and armrests at the front and back. Naturally, all sawn parts must be made smooth, lint-free and treated with special care with sandpaper - small children are always an increased risk of injury. Therefore, to the question of how to make a high chair with your own hands, we give a pretentious answer - we work conscientiously.
The curves for the wooden transformable high chair for feeding are cut out separately - according to the drawing. For rounded parts there is one IMPORTANT point. If you glue the bars together and position the part with wood fibers differently than shown in the figure, then such a part when sawing, or further exploitation can break in the most unexpected way. Therefore, the bars must be glued together with wood fibers parallel to each other. And you need to place the round part of the high chair with your own hands along these parallels. The same applies to the board - we place the part to be cut parallel to the wood fibers of the board.
To successfully glue the bars together we use wood glue or PVA. Additionally, the bars do not need to be jointed or leveled. You need to select fairly even planes for the bars, position them correctly and simply press them harder with clamps. They will dry out within a day for sure.
Then you can make rectangular dowels from the waste bars for the high chair with your own hands. Dimensions – 8x20x50 mm. In general, the length of the dowel should be 4-5 mm less than the total depth of the groove of the two parts being fastened. The edges of the dowels can be slightly rounded.
Mark places for dowels on all parts. To do this, you need to mark the contours of the groove, for example, with a pencil. Rectangular grooves for dowels should be made approximately 30 mm deep. To do this, drill 4-5 holes with a drill with a diameter of 6 mm. Next, use a chisel to align the walls of the groove and fit it to your own, individual, homemade dowel. And if you have a router, then we make the grooves with a router, it’s easier.
When all the parts are ready, there are dowels and grooves for fastening, you can start assembling a wooden transformer highchair with your own hands.
Do-it-yourself wooden transformable high chair for feeding a baby - assembly
We begin to assemble the wooden transformable high chair for feeding with our own hands from the sides. First one is done, then the second. Draw a line on the dowels in the middle of the length. Using a light hammer, install to the marked line. Then we take the part to be connected and insert the dowel into it. We connect the parts first dry, i.e. without glue. After all the sidewall parts are connected, we check for the presence of cracks. If everything is fine, then carefully separate the parts and glue the dowels, and then reassemble them as indicated above. Then you need to tighten the parts and let them dry for about 1 day. You can tighten them with clamps, or wrap them tightly with rope on both sides. But at the same time, make sure that nothing is skewed and there are no gaps. It is less reliable to tighten with a rope than with a clamp, but not everyone has clamps of this size.
While the sides of the transformable high chair for feeding the baby are drying, you can start making the seat and backrest with your own hands. They are cut from plywood or fiberboard, according to the drawing. If the plywood is not thick or fiberboard is used, then to add strength it is better to cut out 3 parts of the seat and back and glue them together. Coat with glue and clamp with clamps. It also dries within a day.
After the sides, seat and back are assembled and cut out, we assemble everything completely. On the seat and backrest with planned reverse side For a wooden transformable high chair for feeding a baby with your own hands, you can immediately attach the crossbar strips. To do this, use either dowels or, which will be even easier, small self-tapping screws. To make it work properly, the planks must be attached with gaps of 5 mm on each side along the width of the seat and backrest. The back and seat can be connected to each other metal corner, or a metal strip bent along.
If we do it on dowels, then we drill holes in the seat for fastening to the crossbars of the chair. It is better to attach 4 pieces. standard cylindrical dowels. For the back of such dowels - 2 pieces. We connect the sidewalls with crossbars on which the seat will then rest. We do it without glue to check and see the positions of the seat and backrest. Also, without glue, we place the seat on the crossbars on the dowels. When bending and bending the backrest, mark the position of the bar for fixing the backrest, and then disassemble it. If you wish, you can cut off the side of the backrest strip according to the drawing. There is no desire - everything will be fine too.
For a wooden transformable children's high chair, we cover the seat and back with a soft filler with our own hands: glue it to a hard part or nail it with a stapler. Then, again using a stapler, we tighten the upholstery. It’s better not to save money and not try to upholster and soft part secure with the same bracket. Something might get warped and it won't be good.
Then we assemble all the parts on dowels coated with glue. We put it in place, check the corners. We attach the backrest bar to the backrest with 2 cylindrical dowels. We check the gaps and tighten them with clamps or rope. We are waiting for it to dry. That’s it, the chair from the wooden transformable high chair for feeding with your own hands is ready .
We repeat. If you don’t want to tinker with dowels, you can really connect all the parts using ordinary self-tapping screws. It may not be as durable, but it will be easier to assemble. It's up to the master to decide, of course. And the most convenient and durable way to fasten the curves is with dowels, and then carefully coat them with glue. After this, leave the finished sidewall to dry for a day.
Last step: cut according to size small table DIY high chair. It can be left rectangular, or it can be rounded in the part closest to the child. This is not important. It's just a matter of aesthetics and fuss. This table is attached to the edges of the armrests. It is possible on cylindrical dowels, it is possible on self-tapping screws. And when the child grows up, it is simply removed and that’s it, it is no longer needed.
The table for the high chair is assembled with your own hands in the same way as the chair. First dry, then with glue. Either homemade dowels or self-tapping screws are used. Let's start with the sides. We attach the upper and lower strips to the legs, we get two rectangles. When the sides are assembled, they, like the chair, need to be pulled together and waited a day for them to dry.
Next, the transverse bars are attached - with their help, the sidewalls are connected. We attach the crossbars for the feeding table with our own hands according to the drawing. General meaning is that they are not at equal distances from the edges of the sidewalls. On the lower ones, which will be closer to the edge, there are the legs of the high chair in the high chair position. And the top ones serve as spacers for the legs of the chair so that the chair stands firmly.
Sawed from plywood or laminated chipboard table top It is attached from above to the upper parts of the sidewalls and screwed with self-tapping screws. Everything comes together and is tightened as usual, we wait until it dries.
When the do-it-yourself feeding chair table is ready, let’s turn it into a transformable high chair for feeding a baby. To do this, let's connect them. The table is turned over, the tabletop is at the back, and the chair is placed on the transverse slats of the table.
DIY wooden transforming table for feeding a baby - finishing touches
Finally, when the chair and table are ready, last time check for roughness and sand if any is found.
When a wooden high chair and a transformable table for feeding a child are made with your own hands, they should be completely varnished - use exclusively non-toxic varnishes, or paint them acrylic paint. Preliminarily for giving desired color can be washed and dried.
That's it, the first option is ready. The most adequate description was found on http://mebelsam.com; material for the note on the first option was taken from this site.
DIY wooden transformable baby high chair - Option 2
To understand what a do-it-yourself high chair will look like in the form of components of option 2, we provide drawings and dimensions.
To make parts of a wooden transformable baby high chair with your own hands, take a beam with a cross-section, for example, 20x30 mm. You will need to make the following parts from it: indicate the length and quantity.
DIY high chair parts sizes, length and quantity
If there are no round parts
- Legs 450 mm 4 pcs.
- Armrests – 365 mm 2 pcs.
If there are round parts
- Front legs 450 mm – 2 pcs., rear legs 390 mm – 2 pcs.
- Armrests – 290 mm 2 pcs.
- Rounded part according to the diagram – 2 pcs.
General
- Bottom strips on the sidewalls 365 mm 2 pcs.
- Cross bars 350 mm 4 pcs. The seat and back are attached to them.
- Seat (H x W) 290X330 mm
- Back (H x W) 450Х330 mm
DIY feeding table spare parts dimensions, length and quantity
- Legs - 450 mm 4 pcs. The legs located in the middle of the table are the lower bars of the sidewalls.
- Lower and upper crossbars, on which the feeding table stands in the table-desk position, and to which the tabletop is attached - 500 mm 4 pcs.
- Cross bars 410 mm 3 pcs.
- Tabletop (H x W) 500x510 mm
- Fastening strips for chair legs, length 230 mm. ATTENTION – in the diagram the thickness of the bars is 15x15 mm, but you can use any. For example, the same 20x30 mm.
Do-it-yourself wooden transformable high chair for feeding a child - Main differences from option 1
The previous part about a wooden transformable high chair for feeding a child with your own hands turned out to be too voluminous. Therefore, in order not to write a sheet again, let’s say that everything is done according to the drawing and dimensions similar to the first option.
Dowels are not used, with the exception of the rounded parts of the high chair. They are made in the same way as in option 1, only they have different sizes. Everything else is held together with self-tapping screws. You can use ordinary ones made of wood, or you can use euro ones. If you use euro-tapping screws, then mark the places where they should go. And in a place with a smaller diameter we drill a hole for them.
Do-it-yourself high chair - making parts and assembling
The bars are cut according to size. Carefully processed with sandpaper. The fundamental difference from the first version of the DIY high chair is the absence of special round parts. But since sharp corners– this is an increased danger for small child, then they need to be rounded. It is the upper parts of the chair legs that are slightly rounded on one side. And the two lower crossbars of the table—the legs on which it stands—are also rounded.
You can also insert several blocks in the sidewalls between the armrest and the bottom bar to which the seat is attached, rectangular or round, it doesn’t matter. They can be placed anywhere at any distance, most importantly in the seating area. This is to prevent the baby from crawling through the sidewall, and it’s also good for beauty.
One more touch. How to make a high chair with your own hands with a movable back? You can make the back of a DIY feeding chair take several positions. You'll have to tinker with this.
To do this, the rear legs and armrests are fastened together using a round part, as was the case in the first version. In this case, the size of the armrest and back leg will be different (see description of the dimensions of the chair). In the rounding you need to make a hole into which a screw will subsequently be inserted, with a handle - a fastener at the end. One side of the screw is attached to the back of the chair, the other goes along this hole. The handle screws onto the edge and secures it in the desired position. The back is fixed.
The hole can be made either with a router, or several small holes can be made with a drill and then finished with a chisel. The size of the hole depends on the screw used. The handle can be whatever you like. In the handle, carefully select a groove for the nut, which will actually be screwed onto the screw and secure the back of the chair. It is convenient to fasten the screw itself not in the back of the chair, but in the upper cross member.
Let us note once again that it is more convenient and better to fasten the curves of a high chair with your own hands using glued dowels. Using self-tapping screws will be awkward and clumsy.
This particular chair option is very comfortable for a baby, but to make it you will have to put in some effort. If there is no desire, then it is realistic to do without a movable back, then there is no point in making a separate rounding. Just tilt the back as comfortable for you and your baby. We mark the place where the upper transverse bar touches the folded back and side panels. Let's drill a hole there. We fasten the side panel and back with a self-tapping screw. So on each side.
When the sidewalls for a baby high chair are assembled with your own hands, two transverse fastening bars for the seat and one on a movable cylindrical dowel for fastening the backrest are screwed to the lower bars of the sidewall. A movable dowel means that one of the grooves is several (mm) larger than the diameter of the dowel.
The back and seat are done in the same way as in the first option. Only the sizes here are slightly different - the back is longer. It's more convenient for the baby. It is also not necessary to fasten the seat and back together; it is enough to attach them to the transverse slats, and subsequently make them soft and upholstered, for example, with oilcloth. Before upholstery we sand and paint as usual.
That’s it, the do-it-yourself wooden transformable baby high chair is ready.
DIY High Chair Table
The table for the high chair is assembled with your own hands in the same way as in the first option. First the sides. When the sidewalls are assembled, they are fastened together by transverse strips located at the bottom - they also serve as stands on which the assembled chair stands. This is important because the high chair is installed on them, and this plays a role in its secure installation.
This differs from the previous option - there is no additional crossbar in the middle at the bottom of the table, which makes the table not closed, and it is more convenient for an older child to sit at it. In this case, two crossbars go only from the bottom, where the tabletop is attached - there is only one crossbar. When everything is assembled, all that remains is to screw the tabletop.
There is one point here. How to make a table top for a transformable high chair with your own hands? The figure shows the diagram and dimensions of the version with grooves. For simplicity, you can simply place the tabletop of the feeding table with your own hands, as in the first option, on the bars, or you can, as they do in the factory, sandwich it between the bars. The first option is simpler, but the screws will not be visible suitable place. The second one will require more fuss, but it will be more beautiful. To clamp between the bars, you need to make grooves in them. This can be done without any problems with a router or just a chisel, but it takes longer. Accordingly, the dimensions of the tabletop will be different. There is a plan to make the groove the thickness of the table top and a depth of 5 mm.
For greater stability of the high chair standing on the table, in the assembled form of a wooden transformable baby high chair with your own hands, you can additionally make four small blocks - two on each side. They are located under the countertop; it is better to install them “after the fact”. Those. When the table and chair are ready, we place the chair on top of the table, as it should be in the end. Mark with inside on the sides of the table, where the legs of the chair closest to the tabletop go. Along the sides, parallel to the markings, we attach these blocks to the sides of the table, one on each side. As a result, it should turn out so that the legs of the chair closest to the tabletop pass between these bars, and they, in turn, prevent the chair from moving in different directions. This gives the chair additional stability.
The DIY feeding table is ready.
DIY high chair - summary and some conclusions
As usual, summing up the results, we talk about what is easier - to make a high chair with your own hands, or to buy it? The answer is clear – buy. Moreover, wooden transformers are very common today and are inexpensive. But there are people who want to make their own efforts and imagination, and maybe someone hasn’t sorted out the rubble of their building materials. Then let's go - creativity has been valued at all times.
The first option is, of course, the most common on the Internet, but it is not the simplest. There you have to tinker with dowels, make grooves, glue parts together. It’s great if you have a special large clamp, since regular rope may warp the part. And if you don’t compress the details completely, then maybe nothing will work out at all. In short, a lot of fuss. In addition, over time, such a product will definitely dry out, remember the old swaying chairs. And your child will definitely rock the ready-made do-it-yourself high chair you made.
The second option is not common on the Internet. But this DIY high chair looks like a factory transformable high chair. Assembled with self-tapping screws. The main thing is to ensure that when assembling the mating parts of the parts are at 90 degrees to each other and are not warped. Little fuss. Only if you want to make a movable back with a rounded element, then you will have to work hard.
At one time, when they wanted to make a children's high chair wooden transformer with our own hands, we knew the first option. But it seemed a bit complicated. And then, when we bought a factory one, we found its dimensions and realized that it was no worse, and maybe even better, than the first option. If we had to do it ourselves another time, we would choose the second option.
How to make a high chair with your own hands, video of craftsmen
In principle, every craftsman makes his own transforming high chair for feeding with his own hands. So to speak, according to your needs and with your capabilities. The most understandable and popular videos are collected here. From them it will become clear that the timber can be of any size. The dimensions of the feeding chair itself can also be any. The main thing is to grasp the essence of the design and sequence - how to make a high chair with your own hands.
All photos from the article
The procedure for feeding a baby should be as safe and comfortable as possible for both him and the mother. The dining chair is an original structure that can easily be converted into a place for play or learning. The stable design is equipped with additional protective measures that will protect the little one from falling out and give the mother the opportunity to do household chores.
Is this chair really necessary?
Most young parents will answer unequivocally - yes!
This unanimity is due to a number of factors:
- the small-sized design is complemented by an adjustable game, which means saving space in the apartment;
- there are chairs with a long-term future that can be used for at least 6 years - there are obvious cost savings;
- a certain freedom of movement combined with minimizing traumatic situations - a healthy psychological atmosphere;
- direct contact with the baby while cleaning or preparing food – rational use time;
- sitting on such a chair at a common table, the child feels like he belongs among adults - he is calm and confident;
- the baby unobtrusively learns etiquette lessons - an educational moment.
Plastic or natural materials
The wooden table and high chair, which appeared several centuries ago, serves as the basic model for the production of plastic products. Needless to say, each material has its own advantages and disadvantages.
Wooden chair
Product from natural material beautiful in appearance, looks good in any environment and is distinguished by:
- strength,
- durability;
- environmental friendliness;
- aesthetics.
The functionality of wooden chairs is more modest and mainly consists of the ability to:
- adjusting the backrest angle;
- transformation from a low table with a chair to a high chair.
The disadvantages of the design include:
- bulkiness even when folded, which is unacceptable for a small apartment;
- Cases are not always included;
- presence of edges and corners;
- some difficulties in caring for the surface.
Pay attention!
Assurances that wooden high chairs are heavy and expensive are unfounded.
The analysis showed that the average weight of the product is 8–12 kg (the average weight of plastic ones is from 6 to 12.5 kg).
Domestic models - “Malysh”, “Ksenia” cost about 2,000 rubles, “Chinese” - from 5 to 18,000 rubles.
So everything is relative.
Plastic chairs
The possibilities of plastic are much wider and the product has:
- rich color palette;
- a wide variety of performances;
- possibility of turning into a sun lounger;
- rounded lines that significantly reduce the risk of injury;
- soft case made of waterproof material.
Pay attention!
The main disadvantage of a plastic product is its artificiality.
Low price and too bright colors should arouse your suspicion, and you have the right to demand a quality certificate, relying on the integrity of the manufacturer.
Plastic chairs have three models:
- transformer - adjustable height of the chair and tabletop, can be folded, change the angle of the backrest. When the child grows up, the structure can easily be turned into a separate table and chair, which will become a workplace for the child;
- booster is a free-standing model that can stand on the floor or be attached to a regular chair;
- hanging - weighs about 2 kg, thanks to the elongated handles and a special lever, it is easily attached to the tabletop and can “travel” with you and your child.
Let's do our best for the baby
It won’t be too difficult for a craftsman to do it. Blanks for parts can be purchased at hardware store, and ask your friends for the missing tools. You can choose sizes that will fit into the square footage of your apartment and come up with your own design for the product and soft cover.
Pay attention!
Without carpentry skills, you can learn before starting work design features products in the store, study the assembly instructions, make the necessary notes and even sketch out a rough drawing of a wooden high chair that you will improve at home.
You will need these tools:
- hammer;
- saw;
- jigsaw;
- drill;
- clamp;
- chisel;
- sandpaper;
- stapler;
- hammer.
In number necessary materials includes:
- a 2 cm thick board for planks and curves on the handles (for the part to be strong, the wood fibers must intersect an imaginary radius at an angle of 90°);
- Cut the crossbars from the same board.
- Sand the workpieces.
- Mark the connection points - curves with fragments of railings and crossbars with legs.
- Make holes for the dowels by drilling several holes nearby with a thin drill and adjusting the size with a chisel.
Pay attention!
Making small parts can be challenging.
It will be easier to buy them in the store.
If you cut them yourself, do not mix them up - the diameter of each hole must exactly match its dowel.
Now you can start assembling the product:
- Connect the side parts - legs with crossbars. Place the dowels on glue.
- Check that the articulation angle is correct.
- Secure with a clamp and leave to dry for as long as recommended in the instructions for use.
- In the same way, connect the resulting H-shaped fragments with top part handrails and curves.
- Fix and let the glue dry.
- Sand the finished sides.
- Cut out several parts of the back and seat from a fiberboard sheet - 2-3 layers will give them strength.
- Glue them together with PVA.
- Place under a press and leave to dry.
- Connect the side parts of the chair with transverse strips at the bottom and at the level of the back, in order to mark the places of their connection, as well as the seat and back.
- Upholster the seat and back with easy-to-care and hygienic material, placing foam rubber underneath for softness. You can secure the material from the inside out using a stapler.
- Safety straps.
- Now thoroughly connect the side parts with transverse strips on which to place the seat. The backrest is attached to a support bar.
- Sand the surface and coat with varnish.
Pay attention!
Do not forget about the mandatory presence of safety straps, for which you can use, for example, grosgrain ribbon (sold at a sewing supply store).
In conclusion
A high chair can bring amazing harmony to your home. Mother, being inseparable from her baby, receives a certain freedom of action. A securely fixed child acquires personal space where he can eat, play, and nap. Sitting on a small throne, the child unobtrusively takes over the experience of communication from his parents.
If you don't know how to make your own high chair, the video in this article will help you.