How to make a stork from polyurethane foam. Garden crafts from plastic bottles: do-it-yourself stork. The process is labor-intensive, but it turns out very beautifully
Polyurethane foam - comfortable material for creativity, since it is plastic, hardens quickly, and is easy to process. With its help, they create original sculptures for decoration. garden plot. The stork looks spectacular polyurethane foam, made with your own hands.
Materials and tools
Required:
- a five-liter plastic canister (will serve as the basis of the frame);
- polyurethane foam;
- Styrofoam;
- thick wire;
- acrylic paint (black, gray, red);
- façade varnish;
- scotch;
- PVA glue;
- unnecessary electrodes;
- wood chip;
- bird feathers (optional);
- stapler
Making a sculpture
Stages of work:
- Make a neck frame from wire. Tape strips of foam plastic to it to add volume.
- Cut a spherical piece of foam plastic and place it on the tip of the wire (this is the head). Attach a sliver of wood that will serve as the nose.
- Make legs: pierce the canister with electrodes. At the junctions with the plastic, it is necessary to place pieces of foam plastic to imitate the thickening at the feet of the stork at the top.
- Cut two pieces of foam in the shape of a semicircle - these are the wings. Attach them with wire to the sides of the container.
- For strength, wrap the entire workpiece, except the electrodes, with tape. You have to start from the head.
- Apply polyurethane foam to the workpiece in a zigzag pattern. Each layer needs to dry for 20–30 minutes.
- After the foam has hardened, trim off all excess with a knife.
- Make a primer (dilute PVA glue with water in a ratio of 1:2). Miss the stork. This will help reduce paint consumption.
- Paint the sculpture: the tail and tips of the wings with gray and black paint, the beak and legs with red.
- Coat the bird with varnish.
- Insert feathers into the neck of the canister and attach them to the walls with a stapler. Place the sculpture by burying the electrodes in the ground.
It's very easy to make from plywood. To do this, you don’t need to look for space in the garage or rent warehouse space: a spacious kitchen and a mother-in-law who is a big fan of crafts are enough.
To make the process go quickly, purchase a six-millimeter sheet of plywood and paint from the building materials market, which are used to update the facade of the house. If you don’t have enough tools, ask a neighbor or rent one. A DIY stork for the garden is an interesting craft, but a little capricious. Patience is the main condition when performing work, otherwise you can drag out the work so much that they would rather buy metal figurines than wait for inspiration to strike you.
To make a stork for the garden with your own hands in a matter of days, follow these tips:
- A piece of plywood should be rectangular shape, with sides of 850 and 580 millimeters.
- It is better to use white paint. Buy black and red dye for it. With proper dilution, you will get an exceptionally long-lasting color.
- Don't shy away from waterproof varnish: it will help protect your product from precipitation.
- Half a meter of sandpaper is enough.
- It is better to use an electric jigsaw.
- Brushes are at your discretion.
Using the help, transfer the outline of the stork onto the plywood, if the design is already applied to a thin sheet of newspaper, plug in the power cord of the jigsaw and carefully cut out the body of your stork. To “put the bird on its feet,” you can cut out a stand from the remains of plywood.
Sand the edges with pieces of sandpaper, cover with the first layer of varnish, and let dry. Now you can take up the paints. Prepare 3 types - red, white, black. The first tone is on the nose, the second on the body and up to the middle of the wing, the third is applied to the free places. Leave for 8 hours. Check the paint for strength and apply another layer of varnish on top.
You can use thin reinforcement on your legs. Attach it to the body and stand, cover it with red, deepen the places for the eyes with several blows with a hammer, fill the potholes with black and leave for a day. If there is no reinforcement, then you can use the old Stork for the garden with your own hands and pave it on the roof ridge if desired, if you screw the body to a mop, the wide part of which goes under the rafters, where it is nailed.
What else can you do for your garden with your own hands? Fly agarics made from hemp and basin, animal figurines from tin cans, a unique bed in pink tones.
But the stork is somehow closer to the heart of the Russian person. You can also make this noble bird out of plaster and clay, and it requires one plastic bottle, 500 grams of plaster, gauze bandages and metal rods that bend well, 3 spray cans
Olga Druzhinina
Will need:
1. Empty five-liter canister.
2. Steel rod for legs (we took an old arch from the gym and flattened it).
3. Steel wire for the frame.
4. Polyurethane foam 3 cylinders.
5. Disposable spoons (luckily there were a lot of them in the garden after the oxygen cocktail).
6. Two simple 1.5 liter bottles (for neck).
7. 5-liter water container (for wings).
8. About 15 white one and a half kumys or ayran (wings and tail)
9. 2 liter iron cans (we found it from a beer bottle) for the beak.
10. Stationery knife with a replaceable block.
11. Red tape for legs.
12. Red paint for the beak and black paint for the feathers.
13. Glue-liquid nails.
14. Copper wire for attaching feathers to the wing and tail.
15. Several screws for fastening the wings and tail.
Description of work:
They took a steel arc (I asked my parent, he welded a small plate to it and screwed a canister onto it). I cut off a corner of the canister and twisted a steel wire into the shape of a neck and head, inserted it into the canister and foamed it with polyurethane foam. I waited until it grabbed and held.
then I cut off one and a half lengths from the neck and bottom (I took only the flat part) and, having put it on the neck, began to foam both the body and the neck. I did the neck in several stages, waiting for the previous part to dry.
Then I foamed the entire structure.
After complete drying, I cut off everything unnecessary, giving the structure an outline stork.
I cut everything off the spoons and started gluing it from the neck.
Separately, I cut a 5-liter bottle in half, formed wings and attached pre-prepared blanks using wire and sewing to the wings (from long to short). Then I attached the wings to the structure using long screws.
Next, I formed a beak from iron cans and attached them using the same self-tapping screws. Then I painted it with red paint. I wrapped my legs with red electrical tape, more around the knees, and my eyes with a painted spoon.
A small touch from a can of black paint and the stork is ready!
It is very easy to make a stork from plastic bottles with your own hands, the master class will allow you to complete this product in a short time. In this case, it is necessary to strictly follow all the instructions in order to get a really good result. The product can be placed on a personal plot, which will make it possible to decorate the area.
A master class allows you to make a stork yourself, for which you need to use plastic bottles and other available materials. To make the craft look most realistic, you need to make blanks from plywood. Wings and a body are drawn on them. The prepared templates must be carefully cut out.
For work you will need following materials:
- plastic bottles;
- insulating tape;
- self-tapping screws
It is better to take opaque (white) and dark bottles, and then arrange them, and only red electrical tape will do.
The previously prepared templates need to be combined. For this you will need self-tapping screws. To make feathers, they use white bottles, in which dairy products are usually sold. They need to be cut so that you get strips of the same width. You need to make a lot of shallow cuts along the edges to get the fringe.
The resulting wings are fixed on the body of the bird. To make the fastening as strong as possible, use a glue gun. It must be applied carefully, without leaving traces of glue on the body.
To make the tail and the rest of the body, which will be located below, you need to use dark-colored plastic bottles. For example, beer is sold in such containers.
The beak can be obtained from a blank plastic bottle, since the stork has a red beak; the base is wrapped with red electrical tape. The stork also needs legs. To make them, you can use thick wire. For the eyes, take large beads, which are attached to the head with glue. This completes the DIY stork for the garden. It can be placed near a flower bed or on some kind of stand.
Manufacturing details of the second version
- To make a talisman bird for your garden with your own hands, you should prepare the following materials and tools:
- 2 empty plastic bottles; wooden beams
- : thick and wide (will serve as a base);
- thick aluminum wire (you can use a rod) to make the lower limbs;
- polystyrene foam (thickness 10 cm);
- corrugated hose;
- plastic canister (2 pcs., capacity 5 l);
- stapler
metal mesh (under the wings); How to make a stork with your own hands? The procedure will take a little time, but the algorithm is simple. On the paths personal plot
or a stork will appear in the garden after several hours of execution.
First you need to start making the head and beak of the bird. These parts are cut out of foam plastic. On the surface you can either paint eyes with black paint or glue 2 black buttons (you can use beads).
The beak itself must be cut from a dark plastic bottle. It will consist of 2 parts and is glued to the head. To make the bird's body, you need to cut off the handle from the canister. Bending tightly around the contour of the canister, bend. Remove excess material. You can perform the lower limbs by bending a rod, the ends of which should be secured in wooden block. Plastic feathers are cut from bottles. They are attached to the base of the canister. The tail should be attached first.
You can attach the neck to the stork by attaching wire to the fittings. The next step: put the prepared hose on the wire. Since the feathers on the neck should be small, they are attached with tape. The feathers along the body are fixed on a metal mesh.
Since the bird in the garden will be in an upright position, its wings will be folded. They must be secured with a stapler. The feathers should be positioned so that the details of each subsequent row overlap 1/3 of the previous row. This will give the craft a natural look and feel.
The master class ends with fastening the individual elements. To give the product maximum attractiveness, you can perform decorative tint on the beak, eyes, and legs. The craft can stand outside throughout the summer and is not afraid of bad weather.
Alternative product
An original do-it-yourself stork for the garden can be supplemented with a baby in the nest. Implementing this option will help make your home happy and bring prosperity and well-being to your home. To make a stork sitting in a nest, patterns from the Tilda bird are used as a basis. This is quite modern and fashionable today homemade toy from fabric matter. The patterns for it are simple.
Individual elements of the craft are cut out of dense and durable fabric. The parts are sewn together with thread. To give the body volume, it needs to be stuffed with any filler, so there is no need to completely sew the bird together right away. The filler can be burlap, sawdust, straw, feathers, unnecessary scraps, etc. After completing the filling stage, the hole is completely sewn up.
The beak is made separately. To create it you will need durable red cardboard. The finished part is attached to an already made head. You can sew clothes. To do this, you need to take measurements from the finished bird. At the final stage, the eyes are glued on, the baby is wrapped in a light cloth and placed next to the mother.
If you install a craft on the branches of trees in the garden, when it rains, you need to remove it from there so that appearance the product has not deteriorated. This bird is also placed on window sills; it will harmonize perfectly with indoor flowers.
Based on a fabric stork, feathers are obtained from plastic bottles white, which sell milk or other dairy products. They are fastened together. Eventually the wings come out.
Unusual option
The master class on making a stork, which is based on a large plastic bottle with a volume of 6 liters, is worthy of attention. To make the head, you need to use foam, which will need to be carefully cut out. Don't forget about the shape of the beak and eyes. Black pebbles can act as eyes and are fixed with glue.
The beak can be made from an ordinary plastic bottle. It also sticks to the head. A large plastic bottle will act as the body. You need to cut off the neck of it. Special metal mesh - wings. If the bird's wings are bent, it is necessary to make appropriate bends on the mesh.
The legs are made of wire, which is folded in several layers. Feathers will be from plastic bottles light shade. They are cut so that individual feathers look realistic. Fixation is done using wire to the wings themselves.
To make the neck look voluminous, the bottles need to be finely chopped to create a fringe. They are arranged in rows. Small bottles are placed on the paws, which are also cut at the base. If the fixation of parts seems weak, then the fastening process can be carried out using self-tapping screws.
Making a stork is not a very long and difficult undertaking. To bring your idea to life, you can use the recommendations provided. However, you can make certain adjustments to the idea that will allow you to create a unique and original product.
Each dacha is a little piece of paradise for its owner. And if for some reason this is not the case, something needs to be changed. For example, to make the area more comfortable and lively. Great for this garden sculptures
, and it’s great if they are made independently. One of the guardians of the site is a stork. At least, many summer residents liked this idea, because the stork nests only where they live good people
. This bird is a symbol of prosperity, peace, tranquility, and a family nest.
Materials and tools
- Let's try to make a stork on our own using a plastic container. We will need the following materials:
- a five-liter plastic bottle (for example, for drinking water);
- Styrofoam;
- polyurethane foam;
- wire;
- scotch;
- dye;
brushes
We can use other materials in the decorating process. This stage depends entirely on your imagination and creative skills.
- The plastic container is the body. We will attach the remaining parts to it. The neck is a wire, which is lined with pieces of foam plastic and secured with tape. We will attach the neck to the body with tape, that is, to the bottom of the plastic bottle.
- We place a piece of foam plastic on the neck - this is the head. We try to round it.
- We also make the thighs from foam plastic by inserting equal pieces on both sides of the neck of the bottle. We fix everything with tape.
- The legs will be made from used electrodes. But metal rods will also work equal length, and just neatly folded wire several times.
- There will be a long nail as a beak. You can put a piece of wood on it.
- We apply polyurethane foam on top of the resulting layout with our own hands.
- We polish. All excess must be carefully trimmed.
- You need to paint the sculpture with acrylic paints.
- You can insert real feathers into the tail and wings.
Here is our garden bird!
We will need:
- opaque black and white plastic containers;
- plywood sheet for template;
- self-tapping screws;
- glue gun;
- red electrical tape.
We cut out a template of the stork’s body and wings from plywood with our own hands. The templates are fastened to each other using self-tapping screws. Feathers are plastic milk bottles. We will cut them into strips and make a fringe. The stripes must be the same width. We take a glue gun and attach the feathers to the body of the bird. We make the tail and lower part of the body, the bottom of the wings from black bottles (for example, shampoo). We simply wrap the beak with red electrical tape. The legs can be made of wire and painted. You can draw eyes, or you can buy special decorative ones; any craft store has these (for toys).
The process is labor-intensive, but it turns out very beautiful.
Compositions with a stork
Of course, a garden stork can be a completely self-sufficient sculpture. But you can make everything more interesting by arranging a whole composition.
For example, you can build a stork’s nest with your own hands. Place dry branches on a bicycle wheel or an old cart. If necessary, secure them with threads together. Often branches are also painted with spray paint for structural strength.
Stork made of plastic bottles (video)
And your bird can become the founder of a whole bird family in the country. For example, a stork can open a bird gallery, but a homemade flamingo, peacock, heron will continue it... Fantasy is limitless! Some craftsmen simply paint the plywood blank and cover it with varnish. The result is a unique painting on wood, where fantasy images are combined with your own creative abilities.
Your garden will truly become a place of miracles.
What else can you make a stork from?
We list only the most popular options
- car tires (perhaps the most popular option);
- forged parts;
- plastic lids (but this is jewelry work);
- tree;
- shells;
- disks.
The simplest option is a plywood stork. You simply make a template with your own hands, according to which you cut out the future sculpture. Paint your bird of happiness on both sides acrylic paints. Or with the ones you have, covering the top of the pattern with construction varnish.
DIY garden decor (video)
A stork in the country can be just the beginning of your creative experiments. As practice shows, appetite comes with eating: even people far from artistic work get the taste, and over time, other interesting characters appear on the site. And this is great, they delight not only the owners, but also the guests, who are becoming more and more numerous in connection with such dacha art.
They say that when luck and happiness do not come to the house, then they need to be lured. Place some positive, bright sculpture nearby. In this case, everything comes into play: birdhouses, funny ones and, of course, a stork from a plastic bottle. After all, it is always associated with a peaceful sky, sonorous children's laughter and love.
Master class: stork from a plastic bottle
Materials and tools:
- plastic canister 5 liters;
- white and black 2-liter plastic bottles;
- wire large diameter;
- corrugated plastic sleeve;
- a piece of foam;
- fine-mesh mesh Chainlink;
- scissors, stationery knife, wire cutters;
- furniture stapler, sandpaper;
- acrylic paint, glue for plastic.
Making a stork requires a large preparatory work. You need to cut out a large number of feathers: long ones for future wings and tail, medium ones for the body, small ones for a slender long neck and head. It is advisable to place all the blanks in separate bags, this will make it easier to work when finishing the body.
After the plumage is prepared, it is necessary to make the frame of the figure. The role of the body is played by a plastic canister, the handle of which has been cut off. A wire or rod is inserted into the neck, after which you need to fix the position of the “neck” and put a corrugated sleeve on it. From a piece of polystyrene foam you need to cut out a stork’s head, proportional to the body. To make the bird look more neat, the head must be sanded and then painted.
Next, you need to attach a piece of fine mesh to the body, to which the feathers will be attached. To give your stork beautiful plumage, apply plastic feathers in an overlapping and checkerboard pattern. It is advisable to slightly fluff smaller feathers, for example, for the neck, by finely cutting the ends of the blanks in the form of a fringe and bending the strips in different directions.
Typically, the stork has white plumage with black edging on the edges of the wings. Therefore, you can either use bottles different colors when creating a bird, or color it at your discretion. It is important not to forget about the red paint, which is needed for the beak and legs. The limbs are made from a metal rod bent in half, which is threaded into pre-prepared holes in the bottom plastic canister- “torso”. The toes are easy to make from two brown plastic bottles, cut and folded outward.
There are other options for creating a stork, some of them are simpler, others are much more complicated than the above. Usually the bird is only decorated with feathers made from plastic bottles, but inside there is a hard and dense frame made of wood, plastic, polyurethane foam, metal, etc.
In this case, the frame is first prepared according to the sketch, and then the individual parts are connected together. Only after this are feathers glued to the entire body in several rows. Don’t forget about the beautiful ready-made eyes, which can be bought in all stores with sewing accessories. Then a beautiful flirty stork with long eyelashes will settle on your property and will definitely bring love and peace to your home!
An ancient legend says that God gathered all the reptiles from the Garden of Eden into one bag and ordered the man to throw it into the sea with his own hands. And the curious Homo sapiens wanted to look at the creatures, untied the bag, and, of course, let them all go. The Lord became angry and turned this man into a stork so that he would protect other people from all kinds of toads and snakes. Since then, storks always settle near humans, feed on reptiles and bring us happiness.
Many ancient pictures depict a stork with a baby. Among the Slavic peoples, it is generally accepted that this bird is responsible for childbirth and well-being. If storks have settled on the roof, the house will be full of happiness and children's laughter. And if you haven’t settled yet, then a wonderful stork with a baby can be made with your own hands from scrap material and installed on a ridge or on an apple tree in the center of the garden.
Happiness from bottles
Will need
To make a stork from plastic bottles for the garden, we need to prepare the following materials:
- empty bottles;
- thick wide board for the base;
- rod or thick wire for legs;
- a piece of foam plastic 10 cm thick;
- corrugated hose from a vacuum cleaner;
- 2 plastic canisters with a volume of 5 l;
- metal mesh for wings;
- stapler
Master class on making happiness
In order for almost real storks to appear on the paths of your garden, you will only need a few hours of passionate DIY work.
- Cut out a head with a beak from a piece of foam plastic, draw eyes or glue in black beads with your own hands.
- Cut a beak out of a dark bottle in two parts and glue it in place.
- We begin the master class on making a body by cutting off the handle in the canister. Then you need to bend the mesh to the shape of the canister with your own hands and trim off the excess.
- To make the legs, bend the rod and secure its ends to the board.
- We are conducting a master class on making plastic feathers.
- Attach the feathers to the canister, starting from the tail.
- The master class on attaching a neck begins with attaching the reinforcement wire. Then a hose is put on it.
- Attach small “feathers” to the neck with tape.
- Secure the feathers to the mesh.
- The stork for our garden will stand with its wings folded, so we simply attach all the feathers with a stapler with our own hands, overlapping each previous row by a third.
- We finish the master class by connecting all the details and decorative tinting of the eyes, beak and legs. You can install this bird with your own hands in the depths of the garden for the whole summer. It will not be damaged by rain and will not fly away.
Tilda stork
Fashionable toys today, hand-sewn from ordinary fabric using simple patterns. We will not fully describe the master class on their manufacture.
- Cut out the details of the craft from fabric, sew and stuff with any filling.
- Separately, you need to make a beak (can be made of cardboard) and attach it to the head. All that remains is to make the clothes, glue the eyes, wrap the baby and hand it to the stork.
Of course, such a wet bird cannot be placed on the branches of a garden, but flower pot She can decorate the windowsill.
Stork with baby on the nest
Another way to make your home rich and happy is to make a stork on the nest. You can use tilde bird patterns as a basis. Cut feathers from white plastic milk bottles, staple them together and make wings, decorating the ends with real feathers. Place a few white feathers on the top of your head. Form a tail out of real feathers, sew or glue on eyes and a tie, and place the bird in the nest.
It can be made from ordinary rods, fastened with wire. To make a stork with a baby, put any doll in its wings. The master class on making a lucky amulet is over.
Simple happiness
These two rag birds cannot be left on the garden paths, and a master class on making the first stork requires a lot of time and materials. Don’t be upset and just build a nest and cut out a flat bird from PCB or plywood. Color it, put a string bag with a baby in its beak and that’s it, the stork and the baby have already settled on your roof.
A well-groomed and attractive garden will always please the eye. To make your garden more cozy, you can decorate it with various ones you have made yourself. Today we will talk about how to make a stork for the garden and what materials can be used for this.
Let's start with the simplest thing - PET bottles.
Option #1. Making a stork from plastic bottles
Before you start working, you need to take a small sheet of plywood and make templates from it. Templates need to be made in the form of the body and wings of a bird, as shown in the image. You will also need opaque plastic bottles (preferably white or black), red electrical tape and self-tapping screws. The procedure is as follows.
Step 1. First, you need to connect the previously made templates with each other using self-tapping screws. Plastic milk bottles will be used as feathers. The bottles should be cut into strips of equal width, and then a fringe should be made on the edges of each of them.
Step 2. Next, the finished feathers must be secured to the “body” of the stork using glue gun. It is typical that black PET bottles will be used for the lower body and tail (usually shampoo containers are used for this).
Step 3. The beak should be wrapped with red insulating tape.
Step 4. To make the legs, ordinary wire is used. Eyes for the bird can be purchased at any craft store. That's it, the stork is ready with your own hands!
Option #2. Making a stork from polyurethane foam
Now let's talk about another option for making a stork for the garden with your own hands. Now you need to pre-prepare plastic container for 5 liters, polyurethane foam, polystyrene foam and tape. The algorithm of actions should be as follows.
Step 1. First, the body parts are attached to the bottle using a container. For the neck, ordinary wire is used, lined with pieces of foam. The thighs need to be made in a similar way (using foam and wire). Quite as a key regular one will do large diameter nail.
Step 2. The workpiece will look at the preliminary stage as shown in the image below.
Step 3. For the bird's legs (at least in this implementation) used electrodes are used. In the absence of electrodes, you can select a similar material - for example, thick wire twisted into several turns, or metal rods from thin reinforcement.
Step 4. So, all parts of the stork’s “body” have been assembled, but before proceeding to the next step, you need to carefully check the strength and reliability of the fasteners.
Step 5. After this, the entire layout must be covered with polyurethane foam.
Step 6 All excess is carefully trimmed off.
Step 7 Now the sculpture is almost ready. If the polyurethane foam has already completely dried, then the bird needs to be painted with acrylic paint.
Step 9 Natural feathers are inserted into the wings and tail to make the stork look as realistic as possible. Look what a wonderful garden stork you will make (if you do everything right, of course).
Option #3. Making a stork for the garden from a canister
Before you begin, make sure you have the following: Supplies:
· five liter canisters;
· plastic bottles (black and white);
· plastic tubes;
· thick wire;
· foam plastic;
After this, you need to perform the following sequence of actions.
Step 1. Cut out the foam blanks and use a knife to shape the head. Cut out the eye sockets and make the beak flatter.
Step 2. Use sandpaper to make the surface as smooth as possible. Place toy eyes in the eye sockets (we’ve already talked about where you can get them).
Step 3. Cut a beak from a plastic bottle and secure it with glue.
Step 4. Make a bird's body from a plastic canister and cut off the handle.
Step 5. Cut a piece of mesh large enough to wrap around the canister. Round the mesh a little so that it looks more like wings.
Step 6 A thick metal rod must be bent and legs made from it.
Step 7 Feathers for the stork are cut from white bottles.
Step 8 After this, you can proceed directly to assembling all the elements. Work should start from the “tail”.
Step 9 For the “neck”, a corrugation (for example, from a vacuum cleaner) or something similar is put on the wire. The feathers are attached using self-tapping screws. Due to the fact that our bird’s wings are folded, feathers can only be attached to the belly and slightly on the sides.
Step 10 White bottles are cut in half, and a fringe is formed at the cut sites. The bottles are attached to the “neck” using tape.
Step 11“Wings” must be made from one edge of the prepared mesh. It is important that the second row covers the first by 1/3. On the third row, white plastic is used.
Step 12 For the “legs” of the stork, appropriate blanks are cut out of 0.5-liter bottles.
Step 13 All that remains is to paint the bird’s “beak” and “legs” red. That's it, your DIY garden stork is ready!
For a more detailed introduction to this manufacturing method, we recommend watching the thematic video material.
A well-groomed and landscaped dacha helps create an atmosphere of peace and tranquility. A DIY stork for the garden is an excellent addition to flower beds, flower beds and lawns. This bird is a symbol of happiness, prosperity and prosperity. A stork garden sculpture looks good anywhere. It can be installed on the ground, roof, pole or tree. To make the product more realistic, a technique such as constructing an artificial nest is used.
Stork figurines for the garden bring happiness and blessings, and are also good decoration lawns and flower beds.
Sculpture made from plastic bottles and plywood
To work you will need several plastic bottles in black and white. The basis of the structure will be a sheet of waterproof plywood.
To work you will need the following tools and devices:
- jigsaw;
- scissors;
- screwdriver or screwdriver;
- pliers;
- hammer;
- steel staples;
- self-tapping screws;
- glue gun;
- red nail polish;
- thick wire.
The stork can be made from plywood and white plastic milk bottles, which are cut into fringes for plumage.
Once the tools and materials are prepared, work can begin.
It is carried out in the following sequence:
- In production paper template body and wings of a bird. The size of the sculpture is chosen based on the size of the plot and the tastes of its owners.
- Markings are applied to the plywood. The workpieces are being cut out.
- The edges of the workpieces are polished. The plywood is being primed.
- The wings are attached to the stork's body using self-tapping screws. As a rule, the wings are made in a folded position.
- The legs are being made. A steel rod with a diameter of 6-10 mm is suitable for this. Using staples steel parts nailed to plywood. The lower edge of the rod can be sharpened for ease of fastening the product in the ground or nest.
- White milk bottles have their bottoms cut off. What remains is cut into 2 parts vertically. The strips are cut with scissors. They will imitate feathers.
- Plastic fringe is prepared in a similar way from black bottles.
- The cut pieces are attached to a plywood base. This is done from the tail. The black stripes are attached first. They are used to trim the lower body, tail and wings.
- The rest of the bird is trimmed with white plastic strips.
- The beak is covered with red nail polish.
- The eyes are painted with black paint. You can use large buttons or eyes from one of your old toys.
The stork figure is ready. It can be easily attached to any surface. With the onset of inclement weather, it is better to remove the product and store it in a warm room until spring.
Return to contents
Making a stork from foam plastic
As a rule, after external insulation There are quite a lot of styrofoam scraps left on the walls. They do not have to be disposed of. From this material you can make many interesting and beautiful crafts. Polystyrene foam is lightweight and easy to process. You can make a stork from foam plastic quickly, without using complex tools.
For work you will need the following materials and tools:
- glue;
- sharp knife;
- steel rod;
- wood saw;
- pliers;
- sandpaper;
- black paint;
- paint brush.
Making a stork sculpture for the garden is carried out in the following sequence:
- Blanks are made from wire that will imitate the legs of a bird. Their lower ends are sharpened. The upper ends of the rod are bent at right angles for fastening in foam.
- The contours of the bird's body parts are applied to the foam. The largest piece should be the central part of the torso. The remaining fragments will be needed to give the figure volume, create wings, neck and head.
- The blanks are cut out. This is best done with a saw.
- Steel rods are attached to the central part of the body. In order for subsequent fragments to fit tightly onto the base, grooves are made in it for the rod. To avoid lateral vibrations, the rod is fixed to the base with additional brackets.
- Styrofoam strips are glued to the central part of the body, adding volume. Wings are glued on top of them.
- The neck and head of the sculpture are placed on the pin.
- Using a knife and sandpaper, the shape of the stork is given final form. Additional finishing is not needed, since a relief imitation of feathers can be created on the foam.
- The tail and wings of the bird are painted with black paint. The beak can be wrapped with red electrical tape or painted.
The final stage of needlework is the eyes. They are made from steel bearings or glass balls.
Return to contents
Using polyurethane foam
An unused foam container can be successfully used to make volumetric figure stork Using foam, you can quickly make a three-dimensional blank from which to cut out the desired shape.
To work you will need:
- plastic bottle with a capacity of 5 l;
- scotch;
- Styrofoam;
- steel rod;
- primer;
- paint brush;
- acrylic paints;
- sharp knife;
- rasp.
There is a similar set in the pantry of every home. There will be no additional costs required.
A garden decoration in the form of a stork sculpture is made in the following sequence:
- Going to steel frame. For strength, it can be fixed by welding.
- A plastic bottle is placed on the frame.
- Styrofoam strips are taped to the neck wire. You can pre-shape them to shape and glue them together.
- Femoral parts machined from foam plastic are mounted on the pins intended for the legs.
- The finished frame is moistened with water. Foam is being applied. It covers the entire surface of the workpiece, except for the wire simulating legs.
- After the foam hardens, all excess is cut off. Relief is created using a knife and rasp. After finishing, the sculpture is cleaned of sawdust and dust.
- The dried product is coated with a primer. Next, the bird needs to be painted with acrylic paints. Varnish is applied over the paint.
To make the sculpture more realistic, you can use natural black and white feathers, which are inserted into the tips of the wings and tail.
For reliability, they need to be placed on polyurethane glue.
The finished figure can be installed in the garden on long time. A stork decorated with acrylic paints withstands the effects of ultraviolet radiation, cold and moisture.
