≡× MENU

• Interior
• Window
• Walls
• Projects
• The buildings

Doorway with decorative bricks. Beautiful decoration of doorways with decorative stone. Decorative stone is an ideal solution for interior decoration

Modern houses it is difficult to imagine without arches, and such structures require certain finishing. And then the question arises: what to make it from? There are many materials, among which decorative stone can be distinguished. Except arched structures And doorways, they are used to decorate any section of the walls in the house.

Finishing the arch and walls with gypsum stone

Why choose this material?

Doorways are finished with moldings, stucco, plaster and other methods. But why should you choose decorative stone? What are its advantages? This is a lightweight and aesthetic material that is inexpensive. Its installation does not require much effort, and the variety of colors and textures of the stone sets the tone for the design of the room.

Choice of colors and textures decorative items imitating stone

Advantages of the material:

• Does not affect the microclimate in the house, like natural stone.
• Has light weight.
• Does not burn.
• It does not absorb moisture, so this decorative element can also be used in rooms with high humidity.
• Durable, almost like natural stone.
• Resistant to wear, therefore appearance The product remains unchanged for many years.
• Production is automated, resulting in smooth edges and easier installation.
• To finish artificial stone wall surface, no need to be a professional.
• The product can be restored if the surface is damaged.

That's why it's worth decorating the interior of a room with decorative material.

Doorway trim

Although the material has smooth edges, in order to complete the finishing at the proper level, you need to have an idea of ​​the procedure and quality control.

In order for the finish to stick securely, you need to prepare the surface

Any work begins with the preparatory part. At this stage, the flatness of the surface is checked. If there are flaws, they need to be corrected. The surface should be as flat as possible so that the tiles lie close to each other without gaps and are better set with glue.

The most popular leveling methods are plaster and drywall. The choice depends on the shape of the surface. If it is rectangular, it is easier to achieve a smooth finish using a sheet of drywall. If you have to tile an arched structure, it is better to use plaster. In this case, no one can cancel the use of drywall.

Leveling slopes with plaster

To level the surface with plaster, you will need:

1. starting and finishing line-up;
2. sandpaper;
3. spatula large and small;
4. building level.

The plaster is applied in several layers depending on the initial condition of the surface

Plaster is sold in loose bags in the form of a loose mixture. To prepare the solution, the mixture is diluted in a suitable container. In what quantities to use water and powder, you can read on the product packaging. The proportions depend on the brand and manufacturer.

Apply a thin layer of plaster and wait until it dries. If this is not done, the plaster may subsequently crumble. Each layer is treated with sandpaper to remove irregularities that appear when the starting layer is applied to the surface.

The thickness and number of layers depends on the initial state of the surface. Finishing plaster hides and removes those irregularities that did not disappear or appeared when applying the starting plaster. It is also applied in several layers, and sandpaper is used.

Laying decorative brick and stone near a doorway can cause some inconvenience. Therefore, you can use another finishing material- decorative plaster. These two materials harmonize perfectly with each other.

When using decorative plaster or tiles, the main thing is to choose the right combination of colors.

Drywall

Plaster requires a long procedure for applying and leveling the surface. Moreover, this needs to be done in several layers. It is much easier to use drywall.

Drywall - convenient construction material for quick leveling of walls

Under the plasterboard sheets, a frame is made from metal profile. This design is strong and lightweight. And it won’t be difficult to build it. A strong frame is already half the battle.

Using a frame will result in wasted space. Its degree depends on the initial evenness of the surface. If the wall is very curved, then you will have to use more space to make an even frame. If the wall is relatively flat, then you can even do without a frame by gluing the sheets to the surface.

Using drywall to locally level the surface will not work. Consequently, it is used only if the entire room is leveled with plasterboard.

Attention! For rooms with high humidity, purchase special moisture-resistant plasterboard (it is painted blue-green).

Attached plasterboard sheets onto the frame with self-tapping screws. Dowels are used to mount the frame to the wall surface. The heads of the screws are recessed into the material so that they do not stick out on the surface.

Masonry process

Laying artificial stone will be easy if the preparation was successful. For installation, either cement mortar or special adhesive for decorative slabs is used. Which of these methods to choose is decided separately in each specific case. When using cement, a lot of dirt is formed, it has to be dissolved with water, and glue for such operations is usually sold ready-to-use in mounting capsules. But the cost of the second method is higher.

Glue or cement is not enough. You will also need to prepare:

• construction mesh;
• wire reinforcement;
• level;
• putty knife.

If the decorative stone and all materials have been purchased, the surface has been prepared, and the process of applying the finishing coating begins.

• First of all, the wire reinforcement is fixed with cement mortar, then it is plastered.

Using a spatula achieves maximum evenness

• A mesh is applied. It is needed for a strong connection between the surface and the finishing material.
• Next, the tiles are installed using cement or special glue.

There is one trick builders use that they successfully use to increase strength. cement mortar- add PVA glue to it.

The question may arise: why plaster the surface again? The fact is that these actions were described for a surface leveled with drywall. But simply gluing tiles onto drywall will not work. If the surface is initially plastered, then you can omit the first 3 steps.

To decorate arched structures with stone, you can use several types of decorative stones, which differ in color and size. So, multi-colored tiles can be diluted, and wide and large specimens can be used at the bottom of the wall.

When laying tiles it is not necessary to be absolutely precise if products of different configurations are used

There is one more trick that helps make the transition between the wall and the decorative covering softer. To do this, the lower part is made wide, then gradually narrowed upward.

Visual aid on how to perform installation artificial material:

Decorating doorways with decorative stone is becoming more and more popular. Such material can be laid different ways, it all depends on your imagination. There are no limits or reasons to reject anything. Try it and enjoy the unique result.

In contact with

Comments

Unfortunately, there are no comments or reviews yet, but you can leave your...

New articles

New comments

Vladimir

Grade

plank1957

Grade

Novel

Grade

Irina

Grade

Yaroslav

Decorative stone finishing is one of the most popular methods of decoration. door jambs. This option is used to decorate doorways and entrance doors. This type of cladding creates a warm environment in the home.

Peculiarities

The advantage of artificial stone is that it allows you to imitate rough masonry, but the appearance of the assembled plates looks very natural and neat. It is used for finishing doors in cottages and apartments. Right set stone durable compared to plaster or wood.

Dirt is less noticeable on the plates and colors do not fade over time because stone panels additionally protected by impregnation.

The advantages of artificial stone finishing are as follows:

• beautiful appearance;
• comfort;
• simplicity of the assembly process;
• various options;
• long service life;
• low surface load compared to natural stone;
• ecologically pure material.

Kinds

Studying the main types and materials will allow you to decide which product is suitable for finishing your home. There are three types of artificial stone: brick, rock, cobblestone. The materials used in the parts are concrete and gypsum.

• concrete stone is an ideal choice for people looking for a versatile cladding that can be used both indoors and outdoors. Concrete is durable, resistant to mechanical damage and weather. Especially valuable material in places of temperature changes and high humidity.
• Gypsum stone is ideal option for people who want to install stone panels in the fastest and least in a complicated way. Its advantage is its light weight and ease of assembly.

Advantages and disadvantages

The use of stone as cladding indoors is one of the most attractive solutions, giving the building its own style. Knowing the advantages and disadvantages of the product, you can make the right choice.

The use of decorative stone in the interior has several advantages.

• Decorative rock attracts attention with its beauty and naturalness. The plates are suitable for decorating walls outside and inside the building. The pronounced structure and natural colors will suit any interior. The aesthetic effect is enhanced by the skillful use of lighting - these are shadows on uneven surface stones that create unforgettable visual effects.
• Complementarity. The stone fits perfectly into another style of wall cladding. Placing the plates on a small piece of surface next to the doors creates original look. If the design of the door takes place in the corridor, then a smooth transition of the plates to the furniture in the form of a regular strip will be an excellent combination. It is important that the colors of the furniture and decorative stone are in the same tone.

• The artificial stone is fixed using liquid nails.
• Gypsum is easy to cut with a saw, and the absorbent ability of the material allows it to be painted in any color.

Decorative stone has several disadvantages.

• The stone has a porous structure, it absorbs dust, fungi and water, and it is difficult to clean the plates to a new look. If you use parts to decorate doors on the street of a private house, then over time the material will become dirty, especially light-colored decorative stones. To prevent such consequences, you need to treat the surface with a water repellent. The composition impregnates the plates and appears protective film from external influences environment. The color of the parts becomes brighter.
• For installation of stone regular one will do concrete surface. You need to glue it on a plastered wall. And also cannot be glued to drywall, since the parts will tear off the top layer of the material.

How to choose?

When choosing a decorative stone, it is important to take care of the internal stylistic orientation details that will match the style of the apartment. Before purchasing an artificial stone, you should pay attention to the color, size, depth, as well as the smoothness or roughness of the structure.

• Price. The facing stone is a mixture with the addition of dye. Responsible manufacturers use materials High Quality. The cost of ingredients cannot be very low, which is reflected in the final cost of the product.
• Appearance sample. It has even coloration on the parts. The paint should be evenly distributed throughout the entire object. Poor quality coloring means dye leaks onto adjacent plates. The front side must be neatly painted and free from smudges, abrasions and through holes. Holes on the plates have Negative influence– shorten service life.

• Stone cut. A high-quality artificial product has a uniform structure. The particle size does not exceed 5 mm, otherwise there is a high probability of stone splitting. The cut helps determine how it will be dyed. If the color of the cut part differs slightly from the surface of the product, this indicates that the plates are painted to the full depth. During the manufacture of parts, the dye is added to the mass during mixing, this means that small chips and scratches on the surface of the stone will not be noticeable and will not spoil the appearance of the masonry.
• For finishing entrance doors on outdoors– at home, terrace, balcony, the material must be resistant to frost, dynamic temperature fluctuations and high humidity. The advantage of this finish is an additional layer of insulation: protecting parts from heat loss in winter and from excessive heating in summer.

• For surfaces exposed to high humidity or direct contact with water, you need to use concrete stone, which is resistant to absorption due to its structure.
• You should not choose gypsum material for finishing doorways, doors inside a bathroom or bathhouse.
• You can also decorate interior doorways and window slopes with your own hands.

Advice! In case of existing uneven jambs, you can use decorative stone, it will help hide the defects.

The time of day and type of light are important because the texture of the stone cladding creates a chiaroscuro effect around the area. The smaller the surface for finishing, the more carefully you should choose the structure of the stone in order to avoid overwhelming and optical reduction of the interior.

Modern home interiors feature large, single-color surfaces. The goal of designers is to create an impression of visual expansion rooms or, conversely, reduce the zones so that the background of the room is harmonious. This kind of minimalism is a real challenge for the designer, since this style is sensitive to the proportions of the parts used.

Many people are looking ready-made solutions, which will become the main idea and reveal best features in the design of the room both in general and in detail.

Stone perfectly imitates the appearance of brick, pebbles or naturally crushed rock fragments, giving rooms a unique character.

To decorate the wall near doors and doorways, the designers put forward classic model stone is imitation ordinary brick . This type gives the interior proper character. Thanks to the subtle shading, the three-dimensional effect of the surface is emphasized, which will be noticed by every guest in the house.

If you match the color of the wall surface, a smooth transition will occur that will not stand out from the overall color scheme of the room. There will be a balance between the existing style and new finishing walls This is an ideal choice for all interiors that are looking for their own individuality, have a certain idea for placement in the space, but do not have distinctive features. The introduction of brick will ensure that the interior layout is livened up and will give the place its own character.

• type of lighting used (daylight and artificial);
• the presence of materials placed on the same or adjacent surface (light or dark background);
• impregnation of the panel, which not only protects the product from external conditions, but also sharpens the color.

Considering the most unique elements of decorative stone, namely its deep structure, one can expect completely different visual effects. At sunlight the plates will shine; under artificial lighting they may be darker.

Best options

Decorative stone collections differ in production method, surface texture and color. All these functions create a certain pattern, which is called a style.

• For a home made in minimalist style, decorative stone acts as zoning. Matte but rich colors of parts are used for decoration. If the room does not have enough light, you should use masonry with a glossy surface. Basic tones are black and white.
• Classical the style takes on smooth and uniform plate shapes. The dominant colors in the interior are beige and cream. Stone imitation can be agate or alunite. Such a stone will emphasize expensive furniture, and muted warm light will create a cozy atmosphere.

Master of Architecture, graduated from Samara State University of Architecture and Civil Engineering. 11 years of experience in design and construction.

A wide variety of finishing materials can be used to finish the slopes of a door or window opening. One of them is a door slope made of stone. This is a stylish design solution that gives the room a special mood depending on the type of artificial decorative stone.

There are several techniques for decorating slopes and the openings themselves - this can be a strict symmetrical finishing of the entire opening from the outside or partial: the edges can be torn, the masonry can extend to a fragment of the wall. In any case, finishing the slopes front door decorative stone or window openings always looks modern and sophisticated.

10 reasons to choose artificial stone

Artificial stone is a decorative finishing material that has many positive qualities, which is why it is so popular in interiors of various styles.

Decorating door slopes with decorative stone looks elegant

Positive properties:

Differences in artificial stone by material of manufacture

The artificial masonry used to finish door slopes does not differ in appearance from natural masonry. The composite is made on the basis different materials, so it has three varieties.

Material	Description
	This is an environmentally friendly material, which is characterized by: high sound insulation; thermal insulation; practicality; strength; various shades; ease of installation.
	The features of this material include the following: special equipment is required for its manufacture; Can be used not only for internal, but also for external cladding; high moisture resistance; the material does not absorb dust and dirt; easy to clean, but the use of cleaning products with abrasive additives is not recommended; when ignited, it only melts without releasing toxins dangerous to humans; wear-resistant; repairable.
	Consists of marble, granite and quartz chips with the addition of coloring pigments. For this decorative material characteristic: Possibility of use in rooms with temperature changes and high humidity; strength; practicality; moisture resistance; costs less than acrylic stone.

Types of artificial stone depending on external design

Modern manufacturers offer the most common textures and shades of this artificial material. Below are samples of some of them.

Types of masonry

There are two types of masonry - with and without seams. The seam looks better when laying elements of a clearly defined geometric shape.

Seam preservation

By doing finishing works from artificial stone, you can use a masonry technique that preserves the seams. In order for the seams to be even, it is necessary to install plastic wedges between them. This will allow you to hold the masonry elements in the required position while it sets. adhesive solution.

To maintain the gap between the stones, plastic wedges are used

When finishing slopes with stone, work begins in the lower corner. Cover part of the wall with the adhesive solution using a comb spatula. The decorative element is applied to the wall and pressed.

Stone surface finishing technique

If the door slopes do not have door leaf, then the decorative stone is laid overlapping. If there is a door, the color and texture of the openings should fit harmoniously into the interior and be combined with other decorative finishing materials.

Joining seams

The jointing occurs after the decorative material and the wall surface have completely set. The instructions from the manufacturer of the artificial stone contain recommendations on the use of the type of grouting composition.

Using a syringe gun, the seam is filled to a depth not exceeding 5 mm. This will give the masonry a more pronounced relief.

Seam cutting is done using a syringe gun.

When the grout begins to set, it must be leveled using a shaped spatula or spatula.

A spatula or spatula is used to grout the seam.

The remaining grout from the front surface can be cleaned off with a brush.

Clean seams with a brush

A stone door slope will look more solid if the grout color is gray. Light grout against the background of dark decorative masonry will refresh its overall perception.

Monolithic masonry

Upon registration door slope Without seams, the job takes less time. The monolithic nature of the masonry is achieved by placing the elements as closely as possible to each other. With this method, the adhesive solution is applied directly to the product.

In monolithic masonry, the elements are laid as close to each other as possible

It is important that outside no traces of glue remained.

The adhesive solution is applied to the stone

When laying, it is necessary to control the vertical direction of the masonry. If the products have the correct geometric shape, then it is important to ensure their correct horizontal position.

Check the evenness of the masonry using a level

At the final stage, the masonry is coated with a solution that increases the strength and water-repellent characteristics of the material.

Decoration of corners

When designing a corner, you can use one of two methods:

• lay elements using the ligation method as in brickwork;
• trim the ends of the side fragments maintaining an angle of 45 degrees.

Finishing a window opening with artificial stone

Decorating windows with stone looks no less impressive than decorating doorways. An important condition is the size of the elements. Trim window slope necessary facing stone small in size so that the finished window opening does not look massive.

It is recommended to use small products for window cladding

Window slopes must be leveled and primed outside and inside. When using artificial material, strengthening the surface of the slope, even if it is made of plasterboard, using reinforced mesh not required.

The material is laid on the windows using the monolithic method, starting from the bottom of the slope. When the lower fragments are securely fixed, you can continue laying out the upper rows. Corners should be formed by trimming the end sides of the facing products at an angle of 45 degrees.

When planning the decoration of an apartment or house, choosing the ideal design solution for many ordinary people it becomes challenging task. In an attempt to decorate their homes, people use everything available materials, starting from Italian wallpaper and ending artificial stone. Particularly difficult is the decoration of doorways, since the number of options that designers offer can amaze even the most demanding imagination.

Choose perfect way, which will optimally fit into the overall style solution and correctly emphasize the leading direction, is extremely difficult.

Finishing the doorway: choosing the appropriate solution

Before deciding on the design of the doorway, the designer, together with the owners, needs to decide what exact shape these openings will be.

There are the following forms of doorways:

• Rectangular opening. This method of organizing space requires either the presence of a door or voluminous and noticeable cash. Depending on what kind of cashing is chosen, the doorway can perform both an auxiliary and a main function in the interior of the room. In itself, such a strict form requires additional decor that can give it the necessary gloss and attractiveness.



• Arch. This method of designing doorways is quite popular and appropriate in certain styles. Designers note that using an arched opening is only advisable if the rooms it connects are made in the same style. Experts advise paying attention to the fact that overly massive or bright decorative elements can make such an opening heavier.



FACT! The arch does not have to be round. Other forms are also used: ellipsoidal, trapezoidal, asymmetrical arch - each of them is worthy.



• Imitation of an arch. This method of designing a doorway can be called “lazy”, since in this case an ordinary rectangular opening is given the shape of an arch using segments fixed in the corners of the opening. In this case, designers advise making these corners openwork and airy - this will allow such an arch to fit into any interior and make the room more spacious and lighter.



Finishing doorway without door- this is a special task, the difficulty of which lies in the fact that all the attention that could be focused on the door is transferred to the doorway. Therefore, in this case, designers pay more attention to the design, choosing options and finishing methods much more carefully.

ADVICE! Often curtains or curtains, as well as lambrequins flowing in noble folds, are used as a door substitute in such openings.

Use of plastic and drywall

Despite the popularity of natural materials, the use of PVC panels and panels, as well as finishing openings with artificial decorative stone, is still in fashion. All these materials are acceptable options, which, if executed well, can become a real decoration of the room.



• Plastic panels are the simplest and most laconic option for designing an opening, since they allow you to imitate such a popular wooden texture. Dark panels allow you to create an attractive contrast with a light painted or wallpapered wall, thereby emphasizing the rigor and sophistication of the interior. This design method allows you to visually expand the space and create the effect of a high ceiling. In addition, such panels are the most transparent: they are easy to clean, even if dust or dirt is visible on the surface.



• Polyurethane stucco replaced the usual plaster, because it has a decent appearance with less weight and excellent practicality. When choosing this method of decorating a doorway, you should be extremely careful, since the abundance of decor can overload the room and make it small.

  

  Most often, in such cases, the most simple and concise stucco molding in white or another neutral color is used.

  

• Drywall. Finishing with this material is carried out in cases where the task of designers and builders is to divert attention from the opening and create the effect of a single room.

  

  In addition, it often becomes the basis for the use of other decor: for example, polyurethane cornices are often glued to plasterboard structures.

  

  Regardless of what kind of material will be used to decorate the doorway, designers advise paying attention to the appropriateness and feasibility of using massive or volumetric elements.

  

  Supplementing the traditional design with moldings or mosaics means making the room individual, adding a touch of the owners’ delicate taste to it.

  Decorative stone in the decoration of doorways

  Particularly popular in Lately decorative stone is used to decorate doorways. This is due to the fact that decorative stone is one of the most stylish ways to decorate doorways and allows you to give the room a new mood and sophistication.

  

  The use of such material is quite expensive, but is more than compensated by the decent appearance and reliability of the result obtained.

  

  Finishing the opening with artificial stone is often the ideal solution, since this material has the following advantages:

  • spectacular appearance;
  • durability and reliability in operation;
  • ease of maintenance and the possibility of restoring damaged elements;
  • variability and compatibility with other decorative materials.

  

  Most often, medium-sized stones that do not burden the interior are used to decorate openings in apartments with artificial stone. To give such a finish a “natural” look, the outer edge of the finish is made deliberately uneven, while smooth edges are used extremely rarely.

  

  If an arch is decorated with stone, then in its upper part the stones are laid around the perimeter of the opening: in this way the geometric shape of the arch will be emphasized, which will make it more noticeable against the background of the rest of the stone-lined wall.

  

  If you decorate a doorway without a door with such stone, you should lay the decor on both sides of the opening: this option will allow you to optimally fit the decoration into the interior and connect two rooms into one.

Sections of the article:

Traditional finishing option doorway is the installation of a structure that completely fills the space between the partitions. However, it is not always possible to perform such an installation. This is due to the fact that door blocks are often slightly larger than the existing doorway. In this case, finishing the doors involves the use of other solutions, which will be discussed below.

Finishing the doorway: extensions and panel materials

A classic option for finishing an entrance doorway is the use of extensions and other panels. The best and most simple option is the use of extras. These products have a small width, which allows them to be successfully used for finishing openings. The use of all kinds of decorative panels is suitable both for openings without doors and for doorways with installed door blocks. Both of these options deserve to be discussed in more detail.

Finishing doors with extensions is the simplest and most quick way performing similar work. The accessories are made from various sheet materials. Often, MDF, plywood or natural wood are used for these purposes, which happens much less frequently. The owner of the home can independently make an additional strip.

To do this you will need a certain tool and several sheets of material. With this option, you have the opportunity to decorate the extensions at your own discretion. All you have to do is cut the slats required length and width and decorate according to your own preferences. Installation of the extensions is also quite simple.

Another way to finish entrance doorways is to use MDF or other panels. This design of doors is very similar to that of a solution using extensions. The main differences lie in the original characteristics of MDF panels. Thus, additional slats can change the aesthetic perception of the doorway slightly. At the same time, MDF panels significantly change the appearance of the front door. In addition, they can be used to decorate doorway almost any width. Typically, MDF panels are formed by using several individual planks, similar to the installation of laminate boards. It would be helpful to say that the laminate itself can also be used to finish a doorway.

At the moment, there are two technologies for finishing doors with extensions and decorative panels. The first method involves fixing products using polyurethane foam with slight pressure during polymerization of the material. The second option involves creating a frame onto which additional panels or panels are then attached. The second technology is preferable for finishing fairly wide doorways. As an example, we can note the vestibule between two entrance doors in a private house. The thickness of the external walls in such buildings often reaches 800 mm.

How to finish a doorway with plasterboard

One of the most popular materials of the last decade is drywall. Today it is difficult to imagine a house, apartment or office in which it would not be used. Doorways are no exception, for the finishing of which this truly universal building material is successfully used. It would be useful to note that with the help of drywall you can both level old surfaces and create new ones. This quality of the material allows it to be used for decorating doorways of entrance doors. In addition, using drywall you can finish areas of almost any width. Perhaps the only drawback of this cladding option is the need for additional decoration of the material after its installation. Drywall is a representative of rough materials, the main function of which is to provide the ability to perform “finishing” construction work on a flat surface. Decorating doors in this way is a good option.

The sections of drywall are secured to the slopes of the doorway using a special gypsum-based adhesive. In other words, the finishing material is glued to the end parts of the walls, which allows you to effectively hide traces of the foam used when installing the door block. Then the plasterboard slopes must be puttied together with the walls and painted with a finishing coating to match the interior of the room. It would be useful to say that to decorate plasterboard slopes you can use not only paint, but also wallpaper, natural and artificial stone or other decorative materials.

One of the main advantages of using plasterboard for finishing doors is the wide possibilities for choosing the final finishing coating. Yes, you can use regular water-based paint, wallpaper, tiles, decorative plastering. It would be helpful to say that the tiles can be used without creating a hypocardboard base. True, this is only possible if there is no shingle-type covering on the walls.

At the same time, we should not forget that drywall must effectively withstand moisture, which will inevitably accumulate during the process of steam condensation in the air during winter period. In addition, it will be necessary to reliably protect the door during finishing work with plasterboard. To avoid damage to the decorative coating of the door, it must be pasted over. masking tape. This allows you to protect door block from adhesives, putty and other substances that can damage the surface of the structure.

Decorative finishing of doorways with stone

The use of natural or artificial stone to decorate doorways is good decision, but it is not always appropriate. The fact is that these materials are not suitable for all interiors. They will look more organic in those living spaces that are made in an old style. Of course, in such apartments and houses, stone simply has no competitors. Finishing entrance doors with decorative stone has a number of obvious advantages, and the appearance of such a solution looks great, as you can see from the photo in our article.

The most important advantage of these materials is their neutral structure. This means that both artificial and natural stone do not in any way affect the microclimate of the room. Both materials have excellent moisture resistance characteristics, which is very important when lining the slopes of entrance doors that emit condensation during the cold season.

Another important advantage of finishing doors with decorative stone is durability. It is known that the glue used to fix the material will disintegrate into its components much faster than the stone itself. In this regard, natural stone is somewhat preferable to artificial stone. But the second one can also last for several decades.
Also, the advantages of using stone include simple technology styling that does not necessarily require straight seams. Even a person far from the construction and repair industry can perform this method of cladding. In addition, it is worth emphasizing the wide range of this material. This especially applies to artificial stone. The variety of natural stone products is achieved thanks to in different ways cutting. Using this technique allows you to create hundreds of different patterns and ornaments, even using one type of stone, for example, sandstone.

It would be appropriate to say that this particular variety is usually used when lining entrance doorways with natural stone. There is a type of this material that among consumers has received the popular name “noodles”. This variety is a stone cut into thin strips of varying lengths.

It should be emphasized that decorating entrance doors with artificial or natural stone is an expensive pleasure. But this “disadvantage” is fully compensated by the unique appearance of the cladding, as can be seen in the photo. In addition, this solution is highly reliable. Many experts and designers emphasize that finishing slopes with artificial stone is an ideal solution due to a number of advantages of this particular material. For example, they note the spectacular appearance, the strength of the cladding and durability, the ease of caring for the stone, as well as the ability to restore decorative finishing in case of damage to its individual elements.

In addition, you can also remember the excellent organic combination of this material with other types of cladding. Often, medium-sized stones are used to decorate doorways with artificial stone in apartments and houses. This allows you to avoid loading the interior with large forms. It would be helpful to say that many designers use one interesting technique to give the atmosphere a natural feel. The outer edge of artificial stone trim is deliberately made uneven, but smooth edges are almost never used.

In cases where it is necessary to decorate an arched opening with stone, the material is laid out in the upper part along the perimeter, which allows you to emphasize the shape and make the design noticeable against the background of the rest of the wall. An important nuance styling decorative cladding made of stone is the finishing material of the slopes themselves. This will allow you to stay within the chosen design solution and maintain harmony in the interior.

Other finishing methods

Finishing doors with your own hands, in addition to the methods already listed, is also carried out by a number of other methods, which are a good and often cheaper alternative. Among them are, for example, cladding tiles. However, it should be emphasized that most often this material is used for finishing slopes in sanitary facilities and bathrooms. It would be helpful to say that when tiling a doorway, you can use the leftover material after completing the main work on the walls. This allows you to save cash and reduce total cost repair work.

In addition, you can line the slopes of the doorway using laminated chipboards. This great option, the implementation technology of which is quite simple and not labor-intensive. All you need to do is fix the material with polyurethane foam, and then secure the platbands. In addition, you can use this traditional way door finishing as decoration with natural wood. This material has been used for similar work for many centuries, and perhaps even millennia. The main advantage of wood is its natural attractiveness. In addition, the tree is environmentally friendly and easy to process. It is these characteristics that have made it the most attractive material throughout human history.

The only negative natural wood is his fastidiousness. So, the condition and service life of this material greatly depends on temperature regime and humidity environment. It is also worth emphasizing that to process wood you will need special professional carpentry tools. Otherwise, it will not be possible to decorate the entrance doorway with wood.

In conclusion, I would like to note that there are many options for designing the doorway of the front door. The consumer can only choose the solution that is most suitable for him in terms of the interior, the purpose of the room and the budget for the work. Before finishing the doors with your own hands, you should carefully analyze the proposed options. Also, do not forget about choosing the color of the decorative cladding of the slopes. After all, a poorly chosen shade can ruin the impression of the room as a whole.