Manufacturing of chipboard countertops to order. DIY chipboard tabletop
The table top is an integral part modern kitchen. Every day it is exposed to significant mechanical, temperature, and moisture influences. To the surface working area remained long time V in good condition, it is made from high-strength materials.
A chipboard tabletop is the most economical material. Expert advice will help you figure out how to make a kitchen work surface out of it with your own hands. This will require special tool, free time and some carpentry skills.
Features of the material
The chipboard tabletop has a number of features. Having decided to create the presented interior kitchen space, you need to find out about the characteristics of this material. It should be noted that when creating a kitchen interior, the countertop plays a major role. It bears the bulk of the load.
Due to constant mechanical and temperature loads, this coating can quickly collapse. To prevent this from happening, the material must be durable and reliable. It is also very important that it is easy to clean.
A tabletop made of a material such as chipboard, which was created in accordance with all the rules, is no different in its qualities from wood or artificial stone. This is due to the ability to install the coating without seams.
Typically, chipboard with a width of 60 cm is used for such purposes. The thickness of the material can be in the range of 38-40 mm.
Advantages and disadvantages
A kitchen countertop made of chipboard (38 mm) has a number of advantages. At correct processing it becomes resistant not only to mechanical stress, but also to the influence of aggressive or chemical environments.
A solid tabletop without seams is considered a strong, durable product. It is less susceptible to external influences than laminated varieties. You can choose the shade and texture to suit almost any kitchen.
However, it is worth noting that such material looks much more modest than stone or wood. When exposed high temperatures Peeling of the top layer may occur. In this case, the coating will need to be changed. But in general view A countertop made of chipboard has been in use for quite a long time. She is unpretentious in care, which also makes her in demand.
Materials and equipment
Making countertops from chipboard requires purchasing everything before starting work. necessary materials and tools. To do this, you need to measure the area occupied by the working surface. 
In the process of work, you will need a sheet of chipboard and plastic, self-tapping screws, staplers (0.6 cm), as well as glue and silicone sealant. Then they pay attention to the instrument. Before starting his actions, the master prepares a tape measure, a pencil and a level. Next you will need a rubber hammer, a jigsaw, a hand-held milling machine, and a screwdriver. You will also need scissors, a furniture-type stapler and a silicone gun.
Only after proper preparation can you begin to work. This will allow you to get the job done faster, without stopping.
Initial stage of work
A chipboard tabletop is created with your own hands according to a specific pattern. First of all, the master must prepare everything necessary details. To do this, use a pencil and tape measure to measure existing sizes working area. They are carefully transferred to the material.
If there are several elements of the future countertop, measurements are taken for each part separately. After cutting out, the individual structural elements can be connected using a construction stapler.
The blanks are cut out using a jigsaw. This work must be done carefully so as not to damage the surface of the material. This includes measuring the dimensions of the sink. The hole for its installation is cut out in the corresponding part of the workpiece. To do this, it is necessary to make careful, scrupulous measurements.
The sink should not be embedded too far from the edge of the countertop. Otherwise, the sink will be inconvenient to use.
Workpiece joints
A kitchen countertop made of chipboard (38 mm), after cutting out all the parts, will require proper processing. This will allow all elements to fit more tightly to each other at the joints.
It should also be remembered that the connections must be perfect. Even if the parts of the tabletop are not the same in height, this procedure is necessary. To carry out the subsequent steps, you will need to apply shading to the edges of the blanks using a simple pencil.
The edges of the parts are processed using sandpaper. This procedure must be performed until pencil marks disappear from the surface of the material. First use coarser sandpaper. After this procedure, you can walk over the surface with a thinner version. This will make the joints fit even better together.
Facing
One of the important processes in working with the presented material is preparing the kitchen countertop lining from chipboard. To do this you will need to purchase sheet plastic. When working, it is cut with a knife or even scissors.
When making strips of plastic for the ends, it is necessary to take into account that in these places longer material is required. This is taken into account when creating blanks for cladding. If any excess material remains, it can be cut off later.
The cuts may not be made perfectly. The fact is that the edges will subsequently undergo a processing stage using grinding. All cuts resulting from cutting the material of the future tabletop should be treated with silicone. This is true for both internal and external cuts.
Finishing
A countertop made of chipboard, which is assembled with your own hands, requires high-quality finishing. The plastic must be carefully glued to the cladding. To make the grip better, it is tapped in some places. rubber mallet. To glue the end strips, you need to run them along the bottom edge of the edge.
A router is used to cut off the excess. In this case, the aesthetic appearance will be better than without the use of special equipment in the work of the master.
To bring the surface of the tabletop to perfect shine, it is smoothed out. In this case, a block wrapped in fabric is used. To create a hole for the sink, you need to cut out the installation site with a router.
Final stage
The chipboard tabletop, which the user assembles with his own hands, is folded into a single structure at the next stage. This should not cause any difficulties for home handyman. The finished coating is attached to work surface using a screwdriver and self-tapping screws.
This process will not take the master much time. In this case, you can choose the correct configuration of the working surface. At the same time, choosing any texture and shade will be quite easy. Find perfect combination colors in the interior will be quite simple.
In addition, a tabletop made of a material such as chipboard, made by yourself, will cost much less. If you follow all the recommendations and stages of work, the result will exceed all expectations. If you approach this process creatively, you can create a real masterpiece. Variations such as homemade creation tabletops cannot be found among the custom-made varieties of work area coverage.
Having considered the features of creating and operating a tabletop from a material such as chipboard, you can create a work surface from this material yourself. And in some cases handmade looks much more presentable than custom-made products.
In the kitchen central place takes up the tabletop. It performs important functions, because it has a huge role and the main burden. Convenient when hob, sink, cutting table are a single whole and are connected by a large and solid tabletop. On the market kitchen set All kinds of options are presented: islands that are covered with artificial cast stone, and mosaic cladding.
Surfaces made of laminated particleboard are also known, which have their own advantages. But it is possible to make a kitchen countertop using chipboard with your own hands and cover it with decorative solid plastic. This is not at all difficult to do. A little effort and you will get your dream kitchen surface with your own hands.
Having decided on the material: chipboard and the color of the plastic, you need to decide what the dimensions of the future kitchen countertop will be. It depends on how much time and space the cooking will take. The main goal is ease of cooking. The dimensions of the tabletop canvas are based on the dimensions of the room, bottom drawers, shelves and other wishes.
The average tabletop width is 0.6 m. But the size can be selected individually for you. Thickness from 0.028m to 0.04m.
DIY countertop: pros and cons
A DIY chipboard kitchen worktop has both advantages and disadvantages.
The advantages include:
- Surface integrity. When the tabletop is covered with a solid sheet of plastic, there will be no seams. This is important because consumer qualities improve.
- Wide range of colors, variety of shades.
- Small financial costs, since the chipboard sheets and plastic themselves are not very expensive.
- Ease of care. Plastic coated countertops are easy to clean and wash. Compared to stone, which is easily damaged and needs to be polished and sanded to achieve the original look of the kitchen. In this case, plastic wins.
But there are also disadvantages:
- Such countertops are visually inferior to other kitchen models.
- Deformation is possible when scratches appear, where the plastic will swell and peel off.
- The plastic surface deteriorates from mechanical damage and high temperature conditions.
But with proper handling, the tabletop will last a long time.
Preparing for DIY work
Having decided on the size, color and purchased the necessary items, we begin making them ourselves. To work you need:
- Chipboard sheets and plastic panels.
- Stapler with 0.6 cm staples.
- Glue.
- Roulette.
- Silicone sealant.
- Pencil for markings.
- Level.
- Jigsaw.
- Screwdriver.
- Manual milling machine.
- Construction scissors.
By required sizes from chipboard sheets with the help electric jigsaw cut out the main pieces for the table top. If the tabletop is not solid, then its parts are connected with a construction stapler. This is done with staples, the length of which is 3 cm and the distance between them is 13 cm. In this case, glue is not needed.
Making a tabletop with your own hands
Knowing the size of the sink in advance, cut a hole for it in a given location. This is done with a router. First, pierce the material with a drill, and then gradually move towards the outer edge. Before finishing the work, you need to place something under the cut piece of chipboard to prevent it from falling down.
Connect the parts together. As a result, they should form a single solid surface. Sand the edges with sandpaper to ensure a perfect surface before covering. Treat the end sections with sealant, which are subsequently covered with metal edges or special plastic for this type of cladding.
Such sheets are cut with special construction scissors and their dimensions should be slightly larger than the ends. It’s worse if they are prepared incorrectly and will be smaller. If the edges initially turn out to be uneven, it’s okay, then they will be sanded.
It is more convenient to cut plastic sheets using circular saw. It is necessary to place some kind of board under the sheet. This is done so as not to touch the floors with the saw. And stick it on the plastic underneath masking tape so as not to scratch.
The glue for gluing plastic and chipboard is toxic, so it is better to work with a mask and with open window. It must be applied to both previously cleaned surfaces. First with a brush, then with a piece of plastic, like a spatula, over the entire surface. This will make it very even.
Manufacturing of chipboard countertops to order – great solution for author's design of premises. And not only because the kitchen is modern house- a place where food is prepared. And also because it is often combined with a cozy dining room, a place for spending evenings with the whole family and receiving guests. Countertops are now made from various materials: glass and marble, artificial stone and a stove. But this is for the most part expensive materials, which also have a large mass. Therefore, many consumers today choose chipboard material, as the most practical and affordable for its price.
Why chipboard?
This abbreviation means that the slab is made of wood shavings by pressing under high pressure And temperature conditions. Technologies for manufacturing countertops from similar material assume subsequent cladding with a laminate - a special plastic film. There are also veneered and melamine chipboards, but they are much less common. As a rule, the base is used moisture resistant material optimal thickness(up to 38 mm). Laminated chipboard countertops have a range of functional benefits, which are worth mentioning.
- What is most attractive is the democratic price of the products, as well as the ability to produce in a short time kitchen surfaces according to an individual project.
- In terms of design: a tabletop made of this material can have any color, imitate any structure, thanks to plastic coatings. Therefore, it is possible to implement the most daring interior design solutions.
- Caring for the products is quite simple: all dirt is removed detergents and a damp sponge (there are prohibitions on the use of abrasive and bleaching agents that can lead to changes in color range). It is also prohibited to violate protective layer Chipboard, which can contribute to the swelling of the product when moisture gets inside the tabletop, place objects that have a high temperature on it.
But, despite some operational shortcomings chipboard countertops in Moscow, manufactured by the Comfort company, remain popular and the most sought-after products on the furniture market.
