How to use an electrolux hob. Features of Electrolux induction hobs. Hob equipment
Glass ceramic surface
EHS 6651P
User manual
Please be sure to follow these rules, otherwise the user loses the right to warranty service if a malfunction occurs in the device.
This device complies with the following EU directives:
— 73/23/EWG dated 19.02.1973 “Low voltage regulations” -89/336/EWG dated 05.03.1989 “Electromagnetic compatibility regulations”, including amendments to regulations 92/31/EWG
- 93/68/EWG dated 22.07.1993 “Regulations on CE identification marks”
Correct operation
This appliance may only be used for cooking and frying. food products at home.
It should not be used as a work desk or as a place to store any items.
Any rearrangement or design changes of the device are unacceptable.
Do not place flammable liquids, flammable materials or fusible objects such as film, foil, plastic, aluminum, etc. on the device, or store it on or near it.
Safety precautions for children
Keep small children away from the appliance.
Older children should only use the appliance under the guidance and supervision of an adult.
To prevent accidental activation of the device by small children or pets, we recommend that you activate the child lock.
General Safety Precautions
Installation and connection of a new device may only be carried out by trained and qualified specialists.
Built-in appliances can be used only after installing them in built-in cabinets and countertops that meet the necessary technical standards and are suitable for such use.
If any malfunctions are detected in the operation of the device or damage to the glass ceramics (breaks, ruptures or cracks), the device must be turned off and disconnected from the power supply to avoid possible electric shock.
Repairs to the device may only be carried out by trained and qualified specialists.
Safety precautions when using the device
Overheated fats and vegetable oils ignite quickly. Do not leave cooking foods (such as French fries) unattended.
If you handle the device carelessly, you may get burned.
Remove all stickers and protective films from the glass-ceramic panel.
Power cords should not touch hot surfaces of electrical appliances or hot cookware.
After each use of the appliance, turn off the burners.
Safety precautions when cleaning the device
Before cleaning, the device must be turned off and allowed to cool.
For safety reasons, do not clean the appliance with steam cleaners or using detergents, sprayed at high pressure.
How to avoid damage to the device
The glass ceramic panel may be damaged by objects falling on it.
Impacts from kitchen utensils can damage the edge of the glass-ceramic hob.
Glass ceramics can be damaged by handling cast iron or aluminum cast cookware, or cookware with damaged bottoms.
Fusible substances and food that has boiled over may burn on the glass-ceramic hob. Therefore, they should be removed as quickly as possible.
Do not allow liquid to boil over in pots and pans. This may damage the cookware or glass ceramics.
Do not turn on the burners without cooking utensils or with empty kitchen utensils.
Description of the device
Equipment hob
Functional elements of the control panel
Touch Control fields
The device is controlled using Touch Control touch fields. Features you need activated by touching the sensor fields and confirmed by acknowledging sound signals. Touch fields should be touched from above, without covering other sensor fields.
|
Touchfield |
Function |
|
| On off. | Turning the device on and off | |
|
Increasing set values |
Increasing the heating level/increasing the time values | |
| Reducing set values | Reducing heating level/reducing time values | |
| Timer | Timer selection | |
| Blocking | Locking/unlocking the control panel | |
| Switching the three-circuit burner | Turning external heating zones on and off | |
| Frying zone | Switching the external heating circuit on and off | |
Indication
|
Indication |
Meaning |
|
|
The burner is off |
||
|
Keep warm stage |
Keep warm level set |
|
|
Heating levels |
Heat level set |
|
|
Automatic boiling |
Automatic boiling activated. |
|
|
Problem |
The device performed an incorrect operation |
|
|
Residual heat |
The burner has not yet cooled down |
|
|
Child lock |
Child lock/protection switched on |
|
|
Safety shutdown |
Safety shutdown activated |
Residual heat indicator
Warning! Residual heat from the appliance can cause burns. It takes some time for the burners to cool down after they are turned off. Observe the residual heat display GD.
Residual heat can be used to reheat and keep cooked food warm.
Turning external heating circuits on and off
By turning on or off the external heating circuits, you can adjust the total heating area of the burners depending on the size of the cookware.
Before turning on the external heating circuit, the internal heating circuit must be turned on.
|
Three-circuitburner |
Touchfield |
Controlindicator |
|
Turning on the middle heating zone |
(G) Touch for 1-2 seconds |
One indicator light is on |
|
Turning on the external heating zone |
О Touch for 1-2 seconds |
Two control indicators are on |
|
Disabling the external heating zone |
О Touch for 1-2 seconds |
The second control indicator goes out |
|
Disabling the middle heating zone |
£) Touch for 1-2 seconds |
The first control indicator goes out |
|
HotplateForfrying |
Touchfield |
Controlindicator |
| Switching on the external heating circuit |
NW Touch for 1-2 seconds |
|
| Disabling the external heating circuit |
C5 Touch for 1-2 seconds |
|
Locking and unlocking the control panel
To avoid accidental failure of the set parameters, for example as a result of wiping the device with a cloth, the entire control panel, with the exception of the On/Off touch field, can be locked.
When the device is turned off, the blocking mode is automatically canceled.
Application of automatic boiling
All four heating zones are equipped with automatic boiling.
If you set the heating level using the + touch field, starting from parameter 0, the hotplate turns on for a certain time full power, and then automatically returns to the set heating level.
| Panelmanagement | possiblestepsheating | Indication | |
| Power on(only beginningwithvalues0) | Touch the touch field + | FROM 1 BEFORE 8 | (after 5 seconds) |
| Shutdown | from 8 before 1 / ABOUT | from 8 to 0 | |
| do not use | Touch the touch field - | from9 before 0 | from 9 to 0 |
If during the boiling pulse the user selects a higher heating level, for example moving from stage 3 to 5, then the boiling time will be adjusted. IF there is still residual heat in the cooking zone (indication H), the boiling pulse will not start.
The duration of the rapid boiling pulse depends on the selected heating level.
| stageheating | Durationimpulse[ min.: sec.] | Forboiling |
Applying child lock
The child lock system prevents unauthorized use of the device.
Enabling Child Lock
The device turns off. Child lock is enabled.
Forced removal of child lock
You can cook food separately using the procedure below; After that, it will disable child protection for a while and will be activated again.
Until the next shutdown, the device can be used as usual.
After forcibly canceling the child lock, you must set the appliance to a heat setting or function for about 10 seconds, otherwise it will switch off automatically.
Disabling child lock
The device turns off. Child lock is disabled.
Using the Timer
If, in addition to setting the short-term timer time, a heating level is also set for a given hotplate, then this hotplate switches off after the set time has elapsed.
When a hotplate is switched off, the set timer function is also switched off.
Selecting a hotplate
|
Control Panel |
Indication |
||||
| 1. | The burner indicator flashes. |
indicator |
|||
| 2. | Touch the CLOCK touch field once | The burner indicator flashes |
indicator |
||
| 3. | Touch the CLOCK touch field once | The burner indicator flashes |
indicator |
||
| 4. | Touch the CLOCK touch field once | The burner indicator flashes | indicator | fourth | |
After the control indicator flashes slower, you can set or change the heating level of the cooking zone.
If other timer functions are also set, after a few seconds the shortest time of all timer functions appears and the corresponding control indicator starts flashing.
Setting the time
The time has been set.
Disabling the timer function
The control indicator goes out.
The timer function of the selected cooking zone is disabled.
Time change
After a few seconds, the blinking frequency of the control indicator decreases.
The time has been set.
The time is counting down.
Indication of remaining cooking time
After a few seconds, the control indicator begins to flash more slowly.
Mute the beep
The beep stops.
Safety shutdown
Cooking zone
If the heat level for a hotplate is not set within approximately 10 seconds of switching on the cooking zone, the cooking zone will switch off automatically.
If one or more touch fields are covered for more than 10 seconds by any objects (pots, rags, etc.), a sound signal will sound and the burner will automatically turn off.
If all burners are switched off, the cooking zone will switch off automatically after about 10 seconds.
Control Panel
If one or more touch fields are blocked for longer than 10 seconds, an audible signal will sound. The sound signal is automatically turned off when the touch fields no longer overlap.
Burners
If at least one of the burners is not turned off after a certain time or the heating level is not changed, the corresponding burner will automatically turn off.
A note regarding acrylamide
According to the latest results scientific research Intensive heat treatment of food products in order to obtain a golden brown crust is dangerous to human health due to the harmful effects of acrylamide. This especially applies to products that contain starch. Therefore, we recommend cooking food at the lowest possible temperature and not browning the food too much.
Cookware
Determine suitable cookware for cooking based on the bottom. The bottom should be thick and extremely even. Cookware coated with steel enamel, as well as cookware with an aluminum or copper bottom, can leave difficult or completely unremovable marks on the glass-ceramic panel, changing the original color of the panel.
Energy Saving
Install kitchen utensils on the burner only before turning on the last one.
If possible, always cover pots with a lid.
To benefit from residual heat, turn off the burners until the end of cooking.
The dimensions of the bottom of the pan and the burner should be the same.
Examplesapplicationsatcooking
The data in the table below is indicative only.
|
stageWayready— heatingphenomena |
Purpose |
Duration | ||
| Residual heat, Off position | ||||
| Support— zhanieheat | Keep warm prepared hot dishes |
as needed |
Cover the product |
|
|
Melt down— tion |
Hollandaise sauce, Melting butter, chocolate, gelatin |
Stir occasionally |
||
|
Thickening |
Whipped omelette, egg jelly |
Cook covered |
||
|
Languor |
Simmering rice and dairy dishes Warming up ready meals |
Add water to the rice, increasing its quantity is at least doubled. Dairy dishes occasionally stir |
||
| Zapari— tionAllowance | Poaching vegetables Braising meat |
Add to vegetables completely a little water (no more than a few tablespoons) |
||
|
Cooking |
Steaming potatoes |
Use small amount of liquid for example max. 1 liter of water per 750 g potatoes |
||
| Cooking significant volumes of food, thick soups and other |
up to 3 liters of liquid plus 60-150 min. l
dish ingredients |
|||
| Light frying | Schnitzel, sausages "cordon bleu" chop cutlet, meatballs, raw sausages for frying, liver, flour gravy, eggs, omelette, frying donuts |
continuous roasting | ||
| Intensive— privatefrying | Potato pancakes, roast tenderloins, steaks, |
5-15 min. on each side |
Turn over from time to time |
|
| Boil FrytionFritirotion | Boiling a large amount of water, boiling “dumplings”, frying meat (goulash, poached roast), deep-frying “french fries” | |||
Washing and care
Carefully! Residual heat from the burners can cause burns.
Attention! Sharp and abrasive cleaning agents will damage the appliance. Clean the device with water and a mild detergent.
Attention! Residues from cleaning agents damage the device. Remove them with water and detergent.
Cleaning the device after each use
1. Wipe the device with a damp cloth and some detergent.
2. Dry the device with a clean cloth.
Removing contaminants
1. Place the cleaning scraper at an angle to the glass ceramic surface.
2. Using sliding movements of the scraper blade, remove dirt.
3. Wipe the device with a damp cloth and some detergent.
4. Dry the device with a clean cloth.
|
delete |
|||
|
Type of pollution |
immediately |
from a cooled down device |
by using |
|
Sugar, foods containing sugar |
scraper for cleaning |
||
| Plastic, aluminum foil |
pollution* |
||
| Traces of lime and water | |||
| Splashes of fat | cleaning products for glass ceramic surfaces and | ||
| Stains with a metallic sheen that change the original color of the surface | |||
* Scrapers and cleaning products for glass-ceramic and stainless steel surfaces can be purchased in specialized stores
Especially stubborn stains remove using glass ceramic or stainless steel surface cleaner.
Scratches and dark spots on glass ceramics cannot be removed, but they do not affect the normal operation of the device.
What to do, if…
|
Problem |
Possible reason |
Troubleshooting method |
| Burners do not turn on or do not work | More than 10 seconds have passed since the device was turned on | Turn on the device again. |
| Disable child lock (see section "Child Lock") | ||
| Simultaneous touching of several touch fields | Touch only one touch field | |
| The protective shutdown of the device has tripped | Remove any foreign objects from the control panel. Turn on the device again. | |
| Child lock enabled | Turn off child lock (see Locking and unlocking the control panel) | |
| The sound signal sounds when the device is turned off | The control panel is completely or partially covered by an object | Remove item |
| residual heat indication. | The burner has just been turned on and has not had time to heat up. | If the burner is hot, contact the service center. |
| automation | There is still residual heat in the burner And | Allow the burner to cool. |
| The maximum heating level is set to GD | The maximum heating stage provides the same burner power as the automatic boiling system. | |
| The heating level was set by touch field ^ | 1. Turn off the burner. 1. Program the operation of the hotplate using the touch field & | |
| A beep sounds, the device turns on and turns off again after 5 seconds; after another 5 seconds another beep sounds. | The “Ein/Aus” (On/Off) touch field is covered by something, such as a rag. | Do not place any objects on the control panel. |
| Q indicator lights up | The burner overheating protection has tripped | Turn off the burner. Turn it on again. |
| The indication appears (U with a number | Electronic system error | Disconnect for a few minutes device from the mains (remove home fuses electrical wiring). If after turning on the device display B appears again, contact the service center. |
| The display shows (Y and minus | Too much lighting on the control panel, such as bright sunlight | Cover the control panel for a short time, for example with your hand. A beep sounds and the device turns off. (again) turn on the device |
If you are unable to resolve the problem using the above measures, please contact an authorized service center.
Warning! Only specialists have the right to repair the device. Unqualified repairs can have dangerous consequences for the user of the device.
If you use the services service center on erroneous grounds, then a visit to a service center technician may be subject to a fee even during the warranty period.
Disposal
Packaging materials
Packaging materials are environmentally friendly and recyclable. Synthetic parts are equipped with special markings, for example: >PEPSInstallation instructions
Safety instructions
Observe the laws, regulations, instructions and standards in force in the country in which the device is installed. (These include safety requirements, rules and procedures for disposal, etc.).
Installation of the device may only be carried out by a qualified specialist.
Maintain the minimum allowable distances from other appliances and furniture.
A protective tray must be installed under the device.
The cut surfaces in the worktop must be protected from moisture using an appropriate sealing material.
The seal should connect the appliance to the countertop so that there are no gaps left.
Do not install the device in close proximity to doors or under windows. An opening door or window can knock over hot dishes in the heating zone.
WARNING!
Electric shock hazard.
The power supply connector is live.
Disconnect the power supply connector.
Be guided wiring diagram electrical connections.
Follow safety rules when handling electrical appliances.
Correct installation devices connected to the network must be reliably protected from contact with live parts.
The device must be connected to the network by a qualified electrician.
ATTENTION!
Problems caused by electrical current. Loose and incorrectly installed plug connections can cause the connector to overheat.
Terminal connections must be installed technically correctly.
The power cord should not be too tight.
For single or two phase connections, use a suitable power cord type H05BB-F Tmax. 90° (or higher).
If the power cord of this appliance is damaged, it should be replaced with a special power cord type H05BB-F Tmax. 90° or higher. It can be purchased at the service center.
During the electrical installation, it is necessary to provide a device that allows you to disconnect from the network a device with a contact opening width of at least 3 mm across all poles.
Suitable trip devices for this purpose include, for example, emergency switches, fuses (screw fuses must be removed from the holder), automatic safety switches and contactors.
Distinctive features any devices (like) produced by the Swedish company Electrolux are reliable during operation, perfect design and affordable cost. All this applies equally to such household appliances, like an Electrolux hob.
And a device such as the Electrolux combination hob combines both gas and electric burners. This option is in demand by those consumers whose areas of residence are experiencing interruptions in the supply of electricity and gas.
The burners may have different size, shape and quantity (from 2 to 5), including one or more burners that provide ultra-fast heating like .
2 Popular models, prices
Each version of the hob is good in its own way, but Electrolux glass-ceramic hobs are considered the “squeak of fashion” today. Elegant appearance, high functionality, ease of care, affordable price elevate these panels to the peak of popularity.
Popular models are represented by the following options: 
- Electrolux EHH 16340 FK
- Electrolux EHF 6547 FOK
- Electrolux EGG 6343 NOW
- Electrolux EGT 6342 NOX
- Electrolux EGT 7353 YOK
- Electrolux EHF 16240 XK
- Electrolux EHG 6435 X
- Electrolux EHH 3920 BOK
- Electrolux EHI 6740 FOK, etc.
As for the price of an Electrolux hob, it varies between $250 and $1,100. But it will cost 30-40 USD.
2.1 Video about hobs
If you decide to buy an Electrolux hob, you should know that the size of the cookware matters when using gas and glass-ceramic hobs. In order for heating to be uniform and the cooked food to be of high quality, pots and pans must match the size of the heating zone. An example of this is the principle of operation.
Thus, you will have the opportunity to save energy, which will not be wasted, but will be directed exclusively to heating the bottom of the cookware.
If you choose an Electrolux independent induction hob, then you don’t have to worry about the safety of your household. An induction hob only heats the bottom of the pan, while the surface itself remains relatively cool.
The risk of getting burned here is completely eliminated, which is especially important for those families with small children.
Operating instructions Glass ceramic hob EHS60210P 2 electrolux Electrolux. Thinking of you. Share your thoughts with us at www.electrolux.com Contents Safety information Installation Product description Operating the device 2 3 5 6 Helpful tips and advice Care and cleaning If the device does not work... Environmental protection 9 10 11 12 Subject to change without notice Safety precautions For your own safety and proper operation of the machine, please read this manual carefully before installing and using it. Always keep these instructions with the machine, even if you transfer or sell it. Users must be thoroughly familiar with how the machine operates and safety precautions when using it. General safety instructions ATTENTION! Persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, should not use this appliance. They must be supervised or instructed by a person responsible for their safety. Child safety This appliance must only be used by adults. Care must be taken to ensure that children do not play with the appliance. How to prevent damage to the appliance The glass ceramic hob can be damaged if objects or utensils fall on it. work surface with a suitable sealant! Protect the underside of the appliance from steam and moisture, e.g. dishwasher or oven! 4 electrolux Do not install the device near doors or under windows! Otherwise, cookware may tip over from the hob when doors or windows are opened. ATTENTION! Electric shock hazard. Follow the electrical connection instructions carefully. Risk of burns due to residual heat! Operation of the device Turn on and off for 1 second to touch to turn on or off the device. Automatic switch-off The hob switches off automatically if: all cooking zones are switched off. When the flashing of the cooking zone indicator slows down, the countdown begins. Do not set any heating power level. Dairy dishes, stir occasionally 3-4 Steaming vegetables, fish, meat 20-45 min Add a few tablespoons of liquid 4-5 Steaming potatoes 20-60 min Use max. 1/4 l water per 750 g potatoes 4-5 Cook large quantities of food, stews and soups 60-150 min Up to 3 l liquid plus ingredients 6-7 Light frying: escalopes, veal cordon bleu, chops, meatballs , sausages, liver, gravy, scrambled eggs, pancakes, donuts as required Turn halfway through cooking time 7-8 Deep frying, hash browns, fillet steaks, steaks 5-15 min Turn over halfway through cooking time 9 Boiling a lot of water, boiling pasta, frying meat (goulash, pot roast), deep-frying potatoes Information on using acrylamide IMPORTANT! According to the latest scientific research, frying foods (particularly starchy foods) may pose a health hazard due to the formation of acrylamide. Therefore, we recommend frying food at the lowest possible temperature and not frying it until the crust has formed an intense brown color. Care and cleaning Clean the device after each use. Always use cookware with a clean bottom. ATTENTION! Sharp objects and abrasive cleaners may damage the device. For your safety, cleaning the device from contaminants using steam jets or pneumatic cleaners is prohibited. Scratches or dark spots on the glass ceramics do not affect the operation of the appliance. Removing soiling: 1. – Remove immediately: melted plastic, plastic film and foods containing sugar. Use a special scraper for glass ceramics. Place the scraper at an acute angle to the glass ceramic surface and move it along the surface. electrolux 11 – Switch off the appliance and allow it to cool before each cleaning: lime deposits, water marks, grease splashes, shiny discolored spots. Use special means for cleaning glass ceramic or stainless steel surfaces. 2. Clean the device with a damp cloth and a small amount of detergent. 3. Finally, dry the appliance with a clean cloth. If the device does not work... Malfunction Possible cause of the malfunction and how to eliminate it The device does not turn on or does not work. Instructions for maintenance and warranty conditions are given in the warranty booklet. Environmental protection The symbol on the product or its packaging indicates that it should not be disposed of as household waste. Instead, it should be taken to an appropriate collection point for electronic and electrical equipment for recycling. By following product disposal instructions, you will help prevent damage to environment and the potential harm to human health that might otherwise result from improper handling of such waste. For more information about the disposal of this product, please contact your local authorities, waste disposal service or the store where you purchased the product. Packaging materials The packaging is made from environmentally friendly materials and can be recycled. Plastic parts indicate the material from which they are made: >PE< (по‐ лиэтилен), >PS< (полистирол) и т.п. Упаковочные материалы следует выбрасывать как household waste into the appropriate containers at your local waste disposal service. electrolux 13 14 electrolux electrolux 15 www.electrolux.com www.electrolux.ru 892935496-A-102009
Olga 2377
I have been using the Electrolux REX electric hob, model KT6421XE, for about a year. In my almost white kitchen, a black glass-ceramic panel with a stainless steel-colored frame looks very stylish and advantageous. In addition, this frame protects against overflowing liquid, and the tabletop is always clean.
4 HiLight burners, three round, the lower left has three heating zones, and the upper right circle + oval. We chose it specifically with this extension, since we often use the duckling machine. Unfortunately, the power is not enough to use all 4 burners at the same time. And even three, if everyone is working at maximum, but this happens quite rarely, so I have time to cook and fry everything.
The control panel is touch sensitive and quite convenient. Commands are confirmed by beeps and information is shown on the display. The scale is from 0 to 14, but you can only cook at 12-14, the rest is for heating food.
Through trial and error, I finally adapted and became friends with our Rex. Overall, I’m happy with the panel and its functions, although I don’t do a lot of fancy cooking. An excellent “automatic heating” function, it really saves time, the surface itself sets the maximum heating level for a specific burner, and when the water boils, it automatically switches the heating temperature to the pre-selected number.
I am absolutely delighted with the “countdown timer” function. The timer can be set simultaneously for all four burners. After selecting the desired burner, I set the minutes and select the desired power. After the set time has elapsed and a beep sounds, the hotplate automatically switches off. That is, knowing the exact proportions, you can prepare a simple dish without standing next to the stove. For example, in the morning I leave the Turk with coffee for two cups for 6 minutes at around 14, and I can get ready without worrying that the coffee will run away or boil over. Or I set it to 25 minutes at 10 and cook buckwheat porridge while walking outside with my child. There is also a countdown from the start of cooking. This timer is designed to control the operating time of the burner, but I personally have never used it.
 |
entero.ru | RUB 1,790 | |
 |
entero.ru | RUB 7,220 |
 |
Best Kitchen | RUB 8,607 |
The function of automatically turning off the hob if liquid is spilled on it or if anything is on the panel for more than 10 seconds (a pan or an oven mitt) is quite convenient. A warning beep will sound for a few seconds before the hob switches off, so you have time to remove the item if it gets there accidentally.
I constantly use the “lock” function. This function allows you to lock the control panel, which prevents accidental switching off or changing the heating power. When you finish work and turn off the hob, this function turns off automatically.
I have never used the STOP+GO function. I don't quite understand what case it is intended for. When this function is activated, all operating hotplates go to minimum. In this case, the heating power can no longer be changed, but the “Timer” function remains active. When the STOP+GO function is switched off, the previously operating hotplates automatically return to pre-heating power. What this gives is not clear to me, since the residual heat at the burners is quite strong, and the dish can “finish” even when the stove is turned off.
But the “Child Lock” function was simply necessary for me. This function prevents accidental activation and use of the hob, and in a house where there are two inquisitive kids, many accidents happen. When this function is canceled for one cooking cycle and after the stove is turned off, the “protection” will turn on again. Very comfortably!
Manufacturers recommend cleaning the hob after each cooking, but I can’t do that. Therefore, small dark spots and scratches appeared on the glass ceramics, but they do not affect the quality of the surface.
 |
entero.ru | RUR 2,990 | |
 |
