≡× MENU

• Interior
• Windows
• Walls
• Projects
• Buildings

How to clean a bathtub to perfect shine? Clean the bathtub at home How to clean the bathtub

Bright snow-white plumbing simply transforms the room. However, over time, aggressive in its composition tap water, frequent washing and washing, improper care take their toll - a gray coating and rusty spots appear on the bathroom, which call into question the entire sanitation of the house. The burning question of how to clean a bathtub white at home is asked by many, because widely advertised bath cleaning products are sometimes absolutely useless, and in some cases, they can even completely ruin the plumbing. In addition, all chemicals are unsafe, especially for young children. But our grandmothers knew how to wash the bathtub to make it white, and did not use aggressive chemicals.

Summary:

In this article we will tell you how to clean a bathtub, depending on the material of the plumbing fixtures and the type of dirt, because each type of bathtub requires its own special care.

How to clean a bathtub from stubborn dirt at home?

It is necessary to think about the care of plumbing equipment even when purchasing it, because various surfaces require their own special conditions, cleaning methods and products.

Here you need to consider the following:

1. Acrylic bathtubs, which are popular today, need to be cleaned only with special products that are not that cheap.
2. Some products household chemicals designed for soft cleaning, so they will not be able to remove stubborn stains and rust, regardless of the coating material of the sanitary bowl.
3. Products with an aggressive composition that can eliminate any stains, including washing the bathtub of stubborn dirt at home, can destroy the bathtub coating after 2-3 uses.

Important! The situation is similar with the use of a brush for cleaning plumbing: if acrylic or enamel plumbing can only be washed with a soft rag or sponge, then cast iron bath You can also clean it with a stiffer brush.

Do not use metal brushes at all to clean plumbing fixtures to avoid scratching or tearing off the coating.

Preparing for cleaning

Before you clean your bathtub white at home, you need to:

• choose an effective one safe remedy, which is suitable for the type of plumbing coating;
• Be sure to read the composition and instructions for use.

Important! Remember that special acid compounds and abrasive powders are not suitable for all types of coatings. Sometimes it is better to turn to alternative folk methods and means.

How to clean a cast iron bathtub white at home?

Cast iron bathtubs have been manufactured for many years and are in steady demand. Of course, they are heavy, but reliable, especially the older models. Another peculiarity of old cast-iron bathtubs is that dirt very quickly gets clogged into numerous microcracks, and they have to be cleaned quite often, and even with great physical effort. However modern models cast iron bathtubs are less heavy, more practical, and thanks to a special coating, easier to clean - to clean such a bathtub, any acid-containing substances will do.

If you don’t want to buy expensive store-bought products or are allergic to “chemicals,” then use simple folk methods that are time-tested and have not lost popularity these days:

• Cleaning powders. Any cleaning powder is suitable for a cast iron bathtub, and even washing powder if it is lightly soiled. On wet surface Using a plumbers brush, rub in the powder and leave for 20 minutes. Then use a brush to remove all dirt using a circular motion and rinse thoroughly with warm water.
• Soda. Cleaning your bathtub white with baking soda at home is as easy as shelling pears. To do this, use soda ash and baking soda in a 1:1 ratio. Apply the baking soda mixture to a damp surface and leave for 30 minutes. After half an hour, treat the surface with a mixture of powdered bleach and vinegar, leave for another 40 minutes. After cleaning, rinse everything thoroughly and wipe dry.
• Ammonia. Prepare the following mixture: 1 tbsp. spoon of baking soda + 1 teaspoon ammonia. Apply the prepared powder with a sponge to the surface of the font and leave for half an hour. After this, rinse the mixture with warm water.
• Bleach. Mix baking soda with bleach powder in a 1:1 ratio. Apply the resulting mixture to the surface of the bath, and after 40 minutes, rinse with warm water. The plaque will come off immediately after washing off the powder; no further cleaning is required.

How to clean a steel bathtub white?

Steel bathtubs, although more practical than acrylic ones, also do not like abrasive powders. Use the following simple and affordable cleaning products:

• Liquid cleaning products. Choose mild cleaning products in gel form. Apply the product to the surface and rinse with warm water after 5-10 minutes. Remove simple stains with dishwashing detergent.
• Soda. Wet the surface of the font and treat it with soda ash or baking soda. Rinse off the mixture immediately after cleaning. Baking soda also effectively removes rust, so this product is a universal solution for cleaning stubborn dirt from your bathtub at home.
• Ammonia. Prepare the following solution: for 1 glass of water - 1 tbsp. spoon of ammonia. Treat the surface with the solution and rinse with water after 10 minutes. Contaminants will be removed and no additional cleaning is required.

Important! Coating steel baths can't stand it temperature influences. Therefore, when choosing a cleaning product, make sure that the product does not heat up when in contact with water. Work with chemicals only with gloves, as even baking soda in the wrong proportions can cause burns.

How to clean an enamel bathtub?

This type of bathtub is used most often, since enamel bathtubs can withstand temperatures up to 75 degrees, are very easy to maintain and are almost universal in cleaning.

Important! It should be remembered, like any enamel, the surface does not tolerate metal and abrasive brushes. When using rough brushes, the enamel becomes rough and unrespectable; moreover, when the coating is abraded, cracks form.

To save your enamel bathtub from unwanted influences, use the following cleaning products:

• Baking soda. Clean the enamel with baking soda and then rinse off with water. For severe contamination, repeat the procedure 2-3 times.
• Citric acid. Treat the surface of the font with a concentrated solution of citric acid, and rinse off after 15-20 minutes.
• Laundry soap + ammonia. Grate the laundry soap (0.5 cup). Soak the shavings in water for 5 minutes to obtain a homogeneous liquid mixture. Add 3-5 drops of ammonia to the solution. Treat the enamel with the prepared mixture. After 15 minutes, rinse off the product with water. All dirt will be wiped off without much effort.
• Detergents for plumbing. Purchase cleaning detergents from household chemical stores. kitchen stoves and plumbers who will cope with plaque, grease and rust with honor. The most popular: Cif, Comet. Apply the product to the enamel, rinse with water after 15 minutes. Contaminants are best removed after thorough cleaning before rinsing. For the safety of the coating, it is better to use liquid cleaning products.

Is it possible to wash an acrylic bathtub with soda?

Acrylic bathtubs are the most difficult to maintain. When cleaning, do not use:

1. Abrasives.
2. Strong aggressive chemicals.
3. Hard brushes.

Important! All these products can permanently ruin even a new acrylic bathtub.

As a rule, on acrylic coating plaque does not accumulate, and the resulting yellowness can be easily removed with detergents. In addition, it is necessary to distinguish between different types of coatings: bathtubs made of acrylic sheets and bathtubs with acrylic coating:

1. Sprayed bathtubs can develop cracks if not properly maintained. The spraying itself can be erased, even with aggressive cleaning agents, and not just with a rough brush.
2. Products made from cast acrylic are much more practical and it will be much easier to clean a bathtub white at home using just such a material. But choosing new model, keep in mind that a cast sanitary bowl will cost an order of magnitude more.

To care for delicate surfaces, use:

• Mild detergents, preferably gels. Apply the product to the surface and rinse with water after 5-10 minutes.
• You can also use dishwashing detergent (for light stains).

To clean your bathtub white at home, use the following products:

1. Lemon juice or acid. Use 2 glasses per bath lemon juice or 1 sachet of citric acid. Treat the coating with juice or concentrated acid solution. After 10-15 minutes, the contamination will come off along with the rinsed water. Citric acid is practically harmless to any enamel, unlike other acids.
2. Vinegar. Soak paper napkins in a 9% vinegar solution and spread over the entire surface of the font. Leave the bath to soak for 2-3 hours, and then rinse the vinegar generously and thoroughly with water.

1. Clean the surface acrylic bathtub no more than once every two weeks, and disinfect once a week.
2. If you do not have a special disinfectant, then use regular laundry soap. Apply the soap solution to the surface of the acrylic hot tub and then rinse.

How to choose the right cleaning product?

On the shelves of hardware stores you can now find gels, sprays, and powders for cleaning plumbing fixtures. They quickly remove plaque, rust, disinfect, and some also protect the bathtub from new contaminants for some time.

Selection criteria

What products to use for plumbing depends on the following factors:

• Type of plumbing coverage.
• Type of pollution.
• Safety.

Important! If the plumbing fixtures have not seen a brush for a long time, and the coating has darkened over time, then a simple ordinary product is unlikely to save you. In this case, a strong chemical containing acid is needed. If the plumbing is new and simply needs regular cleaning, then you need to choose a less aggressive product.

Types of pollution

The surface of the bath becomes dirty for various reasons, in particular:

1. Simple plaque is a type of dirt that remains when washing. It consists of skin secretions, skin particles mixed with a soap solution. It’s quite easy to remove such deposits - wash off the dirt hot water and a sponge every time after taking a bath.
2. Limescale. If your area has hard water containing various salts, then over time, a yellowish or white crumbling coating will be deposited on the surface of all plumbing fixtures. It must be removed using special means containing acids that can dissolve calcium compounds.
3. Plaque from detergents. The compounds that make up shampoos, shower gels, and soaps form a gray coating on the surface of the bath over time. By simple means you won't be able to get rid of it. Here you will have to work hard to clean the bathtub white at home.
4. Rust. This pollution occurs due to high content iron in water. This type of plaque is a difficult-to-remove stain that requires special means to remove.
5. Yellowness on the enamel. This contamination settles on the surface of the plumbing if the house has old water pipes, from which various plumbing biofilms and oxides spill out.
6. Old enamel. This type of dirt is very difficult to clean, since the surface is covered with small cracks into which dirt has become embedded. Sometimes required complete replacement bathtub or its restoration.
7. Specific contaminants. This type includes stains from paint or other building materials that got onto the surface during repairs, as well as mold. It is necessary to remove specific contaminants using solvents and antifungal agents.

Additional factors

The type of coating also greatly influences the choice of drug. For example:

• acrylic should not be exposed to abrasive substances, only gels and pastes can be used;
• The dense enamel surface is resistant to almost all available detergents.

Important! Don’t forget about safety, especially if there are children, allergy sufferers or simply people with sensitive skin in the house. Therefore, after using detergent, be sure to wash it off with a soft cloth or sponge, and do not skimp on water when rinsing.

Rules of application

When using chemicals household products Observe the following rules:

1. Apply the product strictly following the instructions.
2. Do not use the product more than once a week.
3. Handle chemicals only with gloves.
4. Don't leave harsh chemicals on your enamel for too long.
5. Wipe the surface gently and carefully, using light force, only for deep stains.
6. Rinse off with warm (not hot) water.
7. For acrylic bathtubs, use only special products designed for these coatings.

Important! The best remedy for cleaning - this is one that does not require much effort, is easy to use, does not harm the coating and is safe for people and pets.

Popular brands

The most effective and gentle means are:

1. “Cif.” Use gel - it is preferable. The creamy product “Cif Active” will remove traces of limescale and rust. Use these products to care for metal parts of plumbing fixtures, mirror surfaces, and ceramic tiles.
2. "Comet". Products in the form of a gel are suitable not only for plumbing, but for all kitchen surfaces. For baths, the “7 days of cleanliness” series is best suited. This cleaning product will help get rid of complex stains, even quickly clean the bathtub white at home. And the cleanliness effect will last much longer.
3. “Cillit.” Use for regular cleaning. This product may not cope with limescale and rust.
4. "Domestos". Liquid detergent or gel products are suitable for regular cleaning. The product will cope with pollution of medium complexity and not particularly neglected. The only drawback is the smell of chlorine. The product must not be used on metal parts plumbing fixtures coated with any kind of coating.
5. "Pemolux". An ideal product for cleaning enamel bathtubs, as the product contains soda. For regular cleaning, you can use it on old bathtubs, as the powder slightly scratches the enamel.
6. “San Klin”, “Triton”, Mister Chister” are intended for bathtubs covered with acrylic. The products do not contain acids or strong aggressive substances and do not scratch the surface.

Do not use toilet cleaning products in the bathroom as these products are too harsh.

Do not use products containing: hydrochloric acid, alkalis, aldehydes, oxalic acid, as these chemicals corrode the enamel.

Use mustard powder to clean contaminated areas of enamel. Make a paste from the powder and wipe the contaminated surface.

To clean the bathtub white from any dirt at home, use a recipe for the lazy: fill the bathtub with water and dissolve 0.5 liters of vinegar or 100 grams of citric acid in it, leave the bathtub overnight, and in the morning flush the water and rinse the surface.

How to clean a bathtub from limescale without damaging the enamel?

You can prepare mixtures from homemade products that will help rid your plumbing of limescale and rust. Here are some recipes.

Recipe No. 1 Mix borax (sodium tetraborate) with table vinegar in equal proportions.

Recipe No. 2 Mix salt and heated vinegar until a paste forms.

Recipe No. 3 Mix salt and turpentine in equal quantities.

How to use any product:

Apply the prepared mixture to the stain and wipe off the stain with a cloth.

Important! To remove rust, use the following products: Ammonia. Dissolve alcohol in water and apply the solution to the problem area. After 10-15 minutes, rinse with water. Lemon juice. Squeeze lemon juice onto the rust stains and rinse the surface after 10-15 minutes. Salt + vinegar. Wipe off the rust with a mixture of vinegar and salt.

How to clean a bathtub at home with baking soda and vinegar?

Many housewives are increasingly abandoning store-bought chemicals and prefer more gentle compositions that allow the bath to return radiant whiteness and cleanliness, because the advantages of folk remedies are obvious:

• Availability.
• Safety.
• Softer effect on enamel.
• Low price.
• Ease of use.
• Lasting effect.

Of course, every housewife has her own recipe, but as a rule, all remedies are based on the same products.

Soda

An excellent bleaching agent is used to clean almost all stains, except limescale. Soda is absolutely harmless and has no unpleasant odor. It perfectly removes grease, yellowness, and neutralizes the most persistent stains.

Important! If you want to clean your bathtub until it shines, use soda ash, which is sold in hardware stores. But be sure to protect your hands with gloves before using baking soda.

Tips for use:

1. To remove minor sediment, rub baking soda over the surface of the plumbing fixtures using a damp, soft sponge or brush.
2. Leave the font to soak for an hour, then rinse off the product with a stream of warm water (not hot).
3. To remove heavy plaque, mix soda ash with a food analogue in a 1:1 ratio and proceed as follows:

• Take the prepared mixture and add a little water to it until a paste forms.
• Apply the paste onto the contaminated surface.
• Leave the font for 20-30 minutes.
• Combine 0.5 cup vinegar and 0.5 cup bleach.
• Apply the resulting composition to the soda layer.
• Leave the product on for 30-40 minutes.
• Wipe the surface of the plumbing fixtures with a soft washcloth or sponge.
• Rinse the bathtub thoroughly with water.

Important! To whiten the bathtub, rub laundry soap and mix with baking soda. Dilute the prepared mixture with 5 drops of ammonia and 3-5 tbsp. spoons of water. Rub the prepared solution over the surface and leave for one hour. Afterwards, rinse with warm water.

To defeat dirt and rust, use vinegar. However, before using acid, be sure to test its effect on an inconspicuous area of ​​the plumbing.

Use 9% vinegar as follows:

• Wet a large amount of napkins generously with vinegar.
• Line the surface of the bath with napkins.
• Leave the bath to clean itself for 3-5 hours.
• Remove the paper napkins.
• Rinse the plumbing fixtures with water.

Important! Clean the font with soda and vinegar at the same time, proceeding as follows:

• Moisten the bath and sprinkle generously with soda ash or baking soda.
• Leave the font to soak for several hours, and then generously pour table vinegar over the surface.
• Remember that such cleaning should be carried out when open windows and doors.

This method is suitable for cast iron and enameled bathtubs.

Video

The toilet and bathroom are the smallest rooms in apartments. Washing them until they shine and constantly maintaining freshness is not so simple task. Dirt, rust showing through, limescale, yellow stains - all this haunts millions of housewives. There are hundreds of products on store shelves, but only a few of them are truly effective. Sometimes the only thing that saves the situation is folk recipes. In this article we will look at how to clean a bathtub.

About the nature of pollution

Various deposits are formed during the process of washing the body. They consist of skin particles and skin secretions. To remove plaque, wash it off with hot or warm water immediately after bathing. It is recommended to use a sponge.

The use of soap, gels and shampoos causes the formation of soap scum. It eats into the enamel or coating of the bathtub and after a while becomes difficult to remove, and then you will have to think about how to clean the bathtub.

If the water is too hard, this causes the plumbing fixtures to change color. For cleaning, it is recommended to use products that contain acid. Rust also forms due to water - such water usually contains a lot of iron.

If the bathtub is many years old, then there is a possibility that some stains cannot be removed even with the most powerful means. Cracks form on the old coating, which are invisible to the naked eye. Dirt and plaque eat into them, and it’s not easy to get rid of it later.

If yellowness appears on the enamel, this is due to the presence of old water pipes. Because of them, oxides appear. There are other, more specific contaminants - paint from repairs or mold. Various solvents and anti-fungal agents will help combat these types of contaminants.

Cast iron bath products

Cast iron bathtubs still do not lose their popularity due to their special characteristics. But such products have serious problems. The use of zirconium salts in the process of applying enamel leads to the development of corrosion processes over time. The bath quickly becomes dull and loses its attractive appearance.

Despite the fact that cast iron is an almost eternal material, the internal surfaces of the bathtub are coated with delicate enamels. This means that the first cleaning product you come across cannot be used. It is not recommended to use compounds containing abrasives or concentrated acids. Also, compositions containing oxygen are not suitable for cast iron - these are “Sanitary 2” and “Silit”.

These products do an excellent job of removing rust and deposits, but they cause deep damage. top layer decorative covering. The compositions contain concentrated hydrochloric acid. Using Silit over time will result in a rough and dull bathtub surface.

Cif - ideal for cast iron bathtubs

Among the compositions recommended for cast iron bathtubs are: good choice. So, in the store you can purchase a universal product in the form of Cif sprays or creams. It is great not only for processing cast iron bathtubs, but also for washing sinks, toilets, and tiles. To use the composition, you need to apply a small amount of the drug to the walls of the bath and to the bottom. After about 5 minutes, the product is washed off with water.

"Sannox"

If housewives don’t know how to clean the bathtub, then you can buy Sannox. The product quickly and effectively defeats any type of plaque and removes rust. The product is also able to combat deposits of different nature - organic or fatty, fresh or old. In addition, manufacturers claim that Sannox is able to defeat E. coli, staphylococci and unpleasant odors.

Comet - gel or spray

This product can quite effectively remove dirt and plaque from the surface of cast iron bathtubs. The composition also forms a protective film on the surface that repels dirt.

"Fenolux"

This product in the form of a gel also effectively removes traces of rust and soap stains. The composition begins to work immediately after it is applied. There is no need to wait long for the action to begin.

It is not always possible to purchase some unique cleaning composition. If none of these preparations for cast iron are in the store, then housewives know how to clean the bathtub at home with what is at hand.

Vinegar essence works well against old dirt. You need to fill the bath bowl with warm, but not hot water, and then dissolve 200 ml of essence in it. After about three hours, the water can be drained. However, there will be no harm from using this composition. When it comes to cleaning, the essence can do a lot.

But not everyone has it either. But every housewife has toilet soap and soda. You need to mix toilet soap and soda. This is plaque and dirt. For very serious contamination, add a little ammonia to the soda. Apply the mixture to the bath using a nylon brush.

You can use powdered bleach to whiten your bathtub bowl. It is diluted with water to the consistency of store-bought sour cream. Then the composition is applied to the surface and left until dry. Then you need to wash everything off.

Cleaning acrylic bathtubs correctly

To care for acrylic bathtubs, manufacturers do not recommend compositions containing chlorine, gasoline and alkalis. Ammonia, acetone, and acids are also not suitable. It is not recommended to use abrasives, hard sponges or metal brushes. Let's see how to clean a bathtub at home using products from the store.

Bass for acrylic

For these products, it is better to use a liquid composition or a gel product. All other forms of acrylic cleaner will not work.

"Akrilan"

This special foam, designed specifically for the care of acrylic bathtubs. It fights rust very well different types mold, mildew, soap stains and old dirt. On the surface of the bath is created protective film which will not allow limescale to accumulate.

"Tim-Profi"

How to clean a bathtub quickly and safely? Environmentally friendly and effective composition to combat plaque and dirt. After using this product, the surface of your acrylic bathtub will have a shiny appearance.

Vinegar and lemon juice

This is already a popular method. This mixture is applied to the contaminated surface and then washed off with warm water. But you don’t need to wash it off immediately, but after a while - this is necessary for the composition to start working. To disinfect the bathtub, you can fill the bowl with a solution of 7% bleach. Then the bowl is thoroughly washed and polished.

Cleaning enamel bathtubs yourself

With enamel bathtubs everything is much simpler than with acrylic ones. The same products that are used for cast iron products. But it is much more effective to use people's councils- this way you can achieve cleanliness and not damage the enamel.

Here's how to clean a bathtub with soda to remove traces of rust: apply soda to the damaged areas and rinse off with water after 10 minutes. You can also remove rust from an enamel bath using vinegar and borax. The mixture is first diluted in a separate container, and then applied to a rag and rubbed on the contaminated area. In addition, it is effective to remove yellow spots You can use a mixture of salt and vinegar. But the mixture must be well heated. You can remove rust stains just as effectively. regular salt and turpentine.

Young housewives don’t know how to clean the stains in the bathroom. More experienced women solve this problem with ammonia dissolved in water. You need to wash the bathtub with a cloth soaked in this composition. You can also remove plaque using lemon juice. The affected areas are also rubbed with soda and mustard. You need to mix in a ratio of 1:3.

If the bathtub bowl has become dull and has lost its color, you can restore the shine with the help of paper napkins. They are soaked in vinegar and rubbed into the bath. Next you need to wait a few hours. Then everything is washed thoroughly.

If you need to bleach the bathtub, then mix soda ash and baking soda in a 1:1 ratio. The mixture will begin to act within 10 minutes. Then 50 grams of vinegar mixed with 50 grams of bleach are applied on top of it. After about half an hour, everything needs to be washed off. sometimes much more effective than using modern means.

How to clean bathroom tiles with your own hands?

There are people's councils to solve this problem. Sometimes a folk remedy copes with cleaning much better than a store-bought one.

45 grams of vinegar are dissolved in a liter of water. Then, using a spray bottle, the composition is applied to the surface of the tile. After just a few minutes the mixture can be removed. Helps you clean tiles effectively citric acid with water - it also has a bactericidal effect.

Most of Organic contaminants can be removed using bleach. It cleans and whitens perfectly. Even “Whiteness” will do. Before applying it, apply a portion of the product to one seam and watch how the color changes.

With soda? Dissolve soda in water until it becomes sour cream. But the composition must be wet, otherwise the soda can easily scratch the tile. After cleaning, the tiles are washed with warm water - this will help avoid plaque.

Ammonia dissolved in water cleans both the tiles and tile joints. But its downside is the smell. In addition, you need to work with it carefully - in large quantities it can be dangerous.

How can you properly clean chrome taps?

Taps and shower hoses require just as much maintenance as a bathtub. Rust and plaque also form on chrome surfaces - these are the enemies of all bathrooms. You can defeat plaque and rust with table vinegar. Housewives tell how to clean a bathtub with vinegar. It is evenly distributed over the surface. Then you need to wait about half an hour and wash off the vinegar. This completes all the work.

September 5, 2016
Specialization: facade finishing, interior decoration, construction of cottages, garages. Experience of an amateur gardener and gardener. We also have experience in repairing cars and motorcycles. Hobbies: playing the guitar and many other things that I don’t have time for :)

Every housewife dreams of her bath being snow-white and shining just like in detergent commercials. However, as practice shows, the result after using them is very different from what advertisers promise us. However, do not be upset, in this article I will tell you how to clean a bathtub at home using “improvised” means so that the plumbing fixtures become white and shiny again.

Before I tell you how to clean a bathtub white using folk remedies, I’ll give you some tips on care and use. By adhering to them, you will significantly simplify the process of washing plumbing fixtures, as well as extend its service life and preserve it for a long time. original appearance:

• After using the bathtub, wipe it with a dry soft cloth;
• Make sure that water does not drip from the faucet and shower spout, as this will lead to the formation of a rusty coating. If the faucet is leaking, it must be repaired;
• Do not under any circumstances try to scrub away limescale, rust or any other dirt with a wire brush;

• do not allow sudden temperature changes on the surface of the bath;
• Do not place metal objects in the bathtub. Buckets and basins must be plastic;
• Before using detergents, make sure they are suitable for your type of bath. This is especially true for acrylic bathtubs, which are exposed to chemicals(acids, alkalis, solvents, etc.);
• Wash the bath until white using detergents (no difference between folk or store-bought) at least twice a month.

If you follow these rules, you won’t have to worry about how and what to clean the surface with in order to get rid of rust, limescale, black spots, etc. In addition, the plumbing will always shine.

Traditional methods of cleaning a bathtub

Now let's look at how to clean a bathtub white using home remedies if it so happens that the surface has managed to become “overgrown” with all sorts of deposits and other contaminants. It must be said that there are a huge number of different cleaning methods. However, we will consider only the most effective and proven ones.

These methods include the following:

Method 1: Baking Soda, Vinegar and Bleach

First of all, I note that this cleaner is intended for cast iron bathtubs, since it contains quite aggressive components. To prepare it, you will need:

• baking soda and soda ash;
• bleach;
• vinegar.

1. First of all, you need to mix baking soda with soda ash in equal proportions. Use a few spoons of each soda - this will be enough;
2. then add just a little water to get a paste from the mixture;
3. the resulting composition must be treated with contaminated areas;
4. after this, you need to mix bleach and vinegar in equal proportions and apply the liquid on top of the soda;
5. after half an hour, the surface should be wiped with a damp sponge and then rinsed a large number water.

As a rule, housewives are interested not only in how to clean the bathtub, but also in how to clean the tiles so that their surface shines. This product is excellent for these purposes.

It must be said that this composition copes well with limescale, however, it can also be used to remove other types of contaminants.

If you need to clean acrylic plumbing, you can use vinegar alone without soda and bleach. To do this, simply soak the napkins in vinegar and place them on the contaminated surface. After an hour, the napkins should be removed and then wiped with a soft sponge and rinsed with plenty of water.

Method 2: citric acid

Citric acid is not only very effective means from all types of plaque, but also universal, which can be used both for enamel-coated sanitary ware and acrylic bathtubs. The only thing is, depending on the type of bath, it is used differently.

If it is cast iron or metal, the instructions for using citric acid look like this:

1. in a glass of water you need to dissolve one and a half tablespoons of citric acid;
2. then the composition must be applied to the contaminated surface with a sponge or spray;
3. after fifteen minutes, the contaminated areas should be wiped with a sponge dipped in a solution of citric acid;
4. When the surface is cleaned, the bath should be rinsed with cold water.

If the plumbing fixtures are acrylic, cleaning them is carried out slightly differently:

1. First of all, you need to fill the bath with warm water;
2. then you should add one and a half tablespoons of citric acid;
3. after 12 hours, you need to drain the water and rinse the surface of the plumbing fixtures. It is even advisable to wipe it with a sponge soaked in a soda solution and then wash it. In this case, it is guaranteed that no acid will remain on the surface, which has a detrimental effect on acrylic.

Method 3: Borax with lemon juice

If you are looking for something to clean a bathroom covered in rust stains to make it shine, you can use borax with lemon juice. Moreover, this composition is suitable for all types of plumbing fixtures.

This tool is used as follows:

1. Pour a quarter cup of lemon juice into a container and add borax to it. The amount of the latter should be such that a paste-like consistency is formed, but at the same time the borax crystals dissolve;
2. the paste should be applied to rusty spots;
3. When the paste dries, it must be washed off with water. The composition should go away along with the rust;
4. If the stains are not completely gone, the procedure must be repeated.

If you need to clean metal or cement, for example, that got on it during repairs, use sewer cleaning compounds such as “Mole”.

Method 4: Cleaning powder paste

This composition is also intended to remove rusty deposits. However, it can only be used for enameled plumbing fixtures.

To make this cleaning product yourself, you need to prepare the following ingredients:

This tool is used very simply:

• all ingredients must be mixed with each other in any order;
• The resulting paste should be used to treat rusty stains;
• After this, you need to wash off the paste along with the rust with running water.

Method: 5: ammonia and hydrogen peroxide

Now let's look at how to clean an enamel bathtub to remove limescale. To do this you will need:

The work is carried out in the following sequence:

1. First of all, you need to mix the components;
2. Apply the resulting solution to contaminated areas;
3. after 15 minutes, wipe the treated areas with a damp sponge and then rinse the surface with water;
4. if the plaque is not completely removed, repeat the procedure again.

This product can be used to remove plaque from not only plumbing fixtures, but also tiles. The only thing is, before cleaning the tiles, wash them with soap and water to first remove the top layer of dirt and dust.

Method 6: baking soda with washing powder

Cleaning a bathtub at home can be effectively done with a product based on washing powder and soda. To prepare it, prepare the ingredients in the following quantities:

This composition is used as follows:

1. dissolve baking soda and washing powder in hot water;
2. after this, treat the contaminated areas with a sponge soaked in the solution;
3. after 15-20 minutes, wipe off the dirt with a sponge soaked in the solution;
4. After this, the surface should be rinsed with water.

If you need to remove blackness from metal bath, you can use regular bleach, for example, Domestos. The composition should be applied to the contaminated area and then rubbed with a sponge after 15-20 minutes.

Method 7: soda ash with laundry soap

A fairly effective means for cleaning the bathtub from various types of contaminants is laundry soap mixed with soda ash. It is applied as follows:

1. laundry soap should be grated on a fine grater;
2. after this, the soap must be mixed with soda in equal proportions;
3. Add a small amount of water to the resulting mixture to make it moist;
4. the composition should be applied to the contaminated area and left for an hour;
5. At the end of the work, the treated areas should be wiped with a sponge and then rinsed with water.

Many housewives are interested in what to clean on the forums. plastic panels? Soda Ash with laundry soap copes with the task perfectly.

If the surface of the bath is too neglected and covered with plaque, you can add a small amount of ammonia to the mixture.

Method 8: trisodium phosphate and hydrogen peroxide

Another old proven remedy that allows you to clean a metal or cast iron bathtub from rust is hydrogen peroxide and trisodium phosphate. To prepare this detergent, you need to prepare the components in the following quantities:

This product is made by hand as follows:

1. dissolve trisodium phosphate in warm water;
2. then gradually pour hydrogen peroxide into the solution;
3. Next, you need to moisten the sponge in the solution and scrub off the rust with it;
4. if there are barely noticeable stains on the surface that cannot be wiped off, apply the solution to them and leave for 10-15 minutes;
5. At the end of the work, the treated area should be rinsed with water.

Method 9: oxalic acid

If you need to clean rust from an acrylic bathtub, use oxalic acid. To prepare the composition, you need to dissolve the acid in water in a ratio of one to ten.

After this, the solution should be applied to the yellowed areas and left for an hour. After the specified time, the solution must be washed off with water.

Plastic panels for the bathroom, unlike the bathtub itself, are made of PVC, not acrylic. Thanks to this, chlorine, for example, bleach, can be used to clean them. The only thing is, before cleaning plastic panels with chlorine, make sure to ventilate the room.

Method 10: table salt with wine vinegar

Finally, let’s consider another effective remedy that allows you to get rid of even the oldest and most stubborn rust stains on the enamel surface. This product is prepared as follows:

1. pour 100 ml of vinegar into a container and add a tablespoon of salt to it;
2. The container with the solution should be placed on the stove or in the microwave and heated to a temperature of about 60 degrees.

When the solution is ready, it should be applied to the rust with a sponge and washed off with water after 20 minutes. As a rule, rust goes away after the first application of the composition.

That's all, actually. traditional methods cleaning the bathtub various contaminants. It should be noted that they are more effective than advertised formulations. Moreover, the price of the components is usually several times less.

Conclusion

Each of the folk remedies described above is quite effective. Therefore, choose depending on the type of your bath, as well as the type of contamination and the availability of certain ingredients at hand. At the same time, do not forget that it is much easier to keep your plumbing fixtures clean than to deal with dirt and deposits later.

See the video in this article for more information. If you have any difficulties cleaning your bathtub, ask them in the comments and I will be happy to answer you.

September 5, 2016

If you want to express gratitude, add a clarification or objection, or ask the author something - add a comment or say thank you!

August 14, 2016
Specialization: finishing of facades, interior finishing, construction of dachas, garages. Experience of an amateur gardener and gardener. We also have experience in repairing cars and motorcycles. Hobbies: playing the guitar and many other things that I don’t have time for :)

Plaque on the surface of the bathtub is an inevitable phenomenon that every housewife has to deal with. Getting rid of it is usually not particularly difficult, however, approaching this process it is necessary to do it competently, otherwise you risk getting rid of not only deposits of salts and minerals, but also plumbing fixtures. Therefore, in this article I will tell you how and how to clean old deposits from a bathtub and other surfaces using improvised means, so as not to spoil the plumbing.

Where does plaque come from?

I would like to note right away that it is almost impossible to prevent the appearance of plaque, since the main reason for its appearance is the evaporation of water, which interacts with soap. True, tap water even by itself leaves a residue, since it contains a large amount of mechanical particles and salts.

After the water dries, all these minerals and other elements are deposited on the surface in the form gray plaque. If the water is rich in iron, it can also color the surface in a characteristic orange . As a result, a snow-white bathroom in a very short time turns into an unsightly container of a “gray-brown-raspberry” color.

Of course, after each use you can wipe the bathtub with a dry cloth. In this case, you will not see the plaque soon. However, it is impossible to keep track of all the drops that fall on the surface, so sooner or later you will still have to face the need to remove deposits.

Currently, there are many household chemicals on sale that effectively clean both types of plaque. However, most formulations are based on acids, as a result of which they are very toxic and can even cause burns if they come into contact with the skin. Powder products are more environmentally friendly, however, they scratch the surface of the plumbing fixtures, as a result of which it gradually loses its original attractive appearance.

Therefore, all kinds of “folk” remedies are very relevant in our time.

Methods for removing limescale

First of all, let's look at how to clean a bathtub from limescale deposits. To do this, you can use the following folk remedies:

Below I will tell you how to get rid of pollution in all these ways.

Method 1: table vinegar

The easiest way to clean the surface of plumbing fixtures is to use six percent table vinegar. You can use it as follows:

1. pour undiluted vinegar into a container with a spray bottle, for example, left over from some cleaning product;
2. then spray the vinegar onto the stained areas of the bathtub. For greater efficiency, you can “walk” the top with a brush, however, not very hard, so as not to scratch the coating;
3. after this, the surface should be left for half an hour or even an hour. At the same time, make sure that the surface does not have time to dry out. As a rule, the composition must be applied every 15 minutes;
4. after the specified time, you need to clean the surface with a brush;
5. if necessary, the procedure should be repeated;
6. At the end of the work, the plumbing must be rinsed with water.

This method can also be used for tiles. The only thing is, before you wash the tiles in the bathroom from plaque, wash it with soapy water to open access directly to the lime.

If plaque has accumulated in large quantities in the area near the drain hole, as often happens, plug the plug and pour a glass of vinegar into the bathtub, heated to a temperature of about 40 degrees. The vinegar should be left overnight, after which the stain will probably disappear.

Method 2: citric acid

Citric acid is a good alternative to vinegar. Its main advantage is the absence of an unpleasant odor. Cleaning the surface with citric acid is carried out as follows:

1. Dissolve a tablespoon of citric acid in a glass of water. The granules must dissolve completely, otherwise you may scratch the surface of the bathtub;
2. Using a sprayer or sponge, apply the solution to the contaminated areas and wait 10-15 minutes;
3. After this time, dip the sponge into the solution again and use your hands to rub the contaminated areas with it. As a result, the surface will be cleaned before your eyes;
4. Finally, the bath should be rinsed with water.

It must be said that citric acid also perfectly removes soap scum. Therefore, you can “walk” over the entire bath with a sponge soaked in the solution.

Method 3: soda and washing powder

Another effective detergent can be made from the following ingredients:

This tool is used as follows:

1. V hot water you should gradually add soda and powder;
2. Now dip the sponge into the solution and treat the contaminated area with it. The composition should be left on the surface for 10-15 minutes;
3. Now the dirt should be wiped off with the same sponge.

When choosing what to clean bathroom tiles from plaque, you can also choose this composition. It effectively copes with various types of contaminants on different surfaces and even mold.

Method 4: baking soda and vinegar

If you want to clean the surface of the bathtub from limescale quickly, efficiently and with minimal costs strength, then use soda and vinegar. Instructions for using these products look like this:

1. First, rub the surface with a soda solution. To make it, dilute three tablespoons of soda in a glass of water;
2. After that, apply vinegar to the surface. The plaque removal process will begin along with a chemical reaction, which is accompanied by the formation of foam and hissing;
3. after half an hour, the treated surface should be rinsed with water;
4. if necessary, repeat the procedure again.

As a rule, after the first or second time, the surface of the plumbing becomes perfectly white.

Method 5: ammonia

Ammonia cleans surfaces well from various contaminants to a “shine.” Therefore, it is “grandmother’s” favorite remedy.

Working with it is quite simple - soak a rag in ammonia and place it on the contaminated area. After an hour, rinse the surface with cold water.

When working with ammonia, ensure good ventilation of the room, as it has a sharp, unpleasant effect.

As an alternative to ammonia, you can use hydrogen peroxide. This composition destroys plaque as a result of the release of active oxygen during a chemical reaction.

Removing yellow plaque

So, we figured out how to clean the bathtub from lime deposits. Finally, I will tell you how and with what to wash off the yellow plaque. To do this, you can use the following tools:

Method 1: Borax and Lemon Juice

First of all, let's look at how to remove yellow plaque using borax and lemon juice, since this remedy has been tested for decades. It is applied as follows:

1. prepare a paste of lemon juice and borax;
2. apply the paste to the yellow area with a brush;
3. let the paste dry;
4. Now wash off the paste along with the rust with running water.

As a rule, rust goes away after the first application of the composition. However, if necessary, the procedure can be repeated.

Method 2: Homemade Paste Remedy

To make the paste you will need the following ingredients:

After mixing all the ingredients, they should be applied to the rust stain for no more than 30 minutes.. After this time, the paste must be washed off with running water.

Method 3: trisodium phosphate and hydrogen peroxide

Trisodium phosphate is an excellent degreaser. It can be purchased at almost any hardware store. And if you add a little hydrogen peroxide to it, it does an excellent job of removing rust.

This composition is used as follows:

1. Dilute four tablespoons of trisodium phosphate in three liters of water;
2. after that, pour 50 g of hydrogen peroxide into the solution in small portions;
3. then moisten the sponge in the resulting composition and scrub the rusty stain with it;
4. when the stain becomes barely noticeable, apply the product to it and leave for 10 minutes;
5. after the specified time, rinse the treated area with plenty of water;
6. repeat the procedure if necessary.

Method 4: oxalic acid

A fairly simple and yet effective remedy is oxalic acid. It must be diluted with water in a ratio of 1:10 and applied to the contaminated area.

This tool is used as follows:

1. Apply oxalic acid with a brush to the contaminated area;
2. then leave the composition for three hours;
3. After this, wipe the treated area with a sponge soaked in warm water.

Method 5: hydrogen peroxide with ammonia

Finally, let's look at how to clean a bathtub with hydrogen peroxide and ammonia. This is done as follows:

1. in a clean container, mix 150 mg of ammonia and 50 mg of hydrogen peroxide;
2. leave the solution for 10 minutes until the reaction is complete;
3. now you need to moisten the sponge in the solution and apply it to the yellowed area;
4. After 20 minutes, the product should be washed off with running water.

I must say that this method Versatile enough that it can also be used to remove limescale.

People are often interested in how to clean a mirror from plaque. Tooth powder, which is ground with a rag, is excellent for these purposes. You can clean glass ones in the same way.

Here, in fact, are all the ways to clean the bathtub from plaque that I wanted to tell you about.

The bathtub is often exposed to various types of contamination. Except unkempt appearance plumbing fixtures, rust, and limescale can become a source of large amounts of bacteria and also cause an unpleasant odor. Traces are left by children's toys, shampoos and other products left on the sides.

Therefore, many housewives are interested in the question of how to clean a bathtub at home. Today, fortunately, household chemical stores can please us with an abundance of various detergents that will not only help clean a dirty bathtub from plaque, but will also remove rust and other contaminants.

Before you start looking for a way to help clean your bathtub white, you need to understand with the reasons for the appearance of stains and other stains.

• Soap residue. The result of using various shampoos, bathing products and regular soap is the appearance of a film on the surface of the water in the bathroom. It is not always possible to remove it by simply rinsing. This film eats into the surface of the plumbing fixtures, and it is no longer possible to do without detergents.
• Lime deposits formed from high hardness water. This is the most common bathroom problem.
• Rust Causes tap water with a high iron content.
• If the bathtub has turned yellow, The reason for this was old pipes, which are not always washed well.
• usually accumulates on tile joints between the details, on window slopes, ceiling. This fungus is very dangerous to health, therefore.
• Colored spots may result from careless handling of a spilled or spilled solution of potassium permanganate, brilliant green and other substances.
• Contamination from ongoing repairs. The bathtub is very susceptible to various stains and dust easily settles on it. Therefore, when carrying out repair work it must be protected with film or other materials.

U old bath The enamel is all cracked, into which any dirt can easily penetrate.

Main types of pollution

Help to remove rust from a bathtub at home the following means.

• Ammonia. Apply it to the stains for a few minutes and wash off with water.
• Lemon juice. The method is the same as with ammonia.
• Cooking surface treatment salt and table vinegar.

You can also clean the bathtub from rust using soda ash (sodium carbonate). It is sold in any household chemical stores. The procedure will be as follows.

1. Mix two types of soda (ash and baking soda) in equal proportions.
2. Add water to obtain a homogeneous pasty consistency.
3. Use a sponge or brush to evenly distribute the composition over the surface of the product.
4. Table vinegar and bleach in powder granules are also combined in equal quantities.
5. Apply this mixture to baking soda.
6. Wait 30 minutes and rinse well with clean water.

Alcohol and hydrogen peroxide also help with rust. These components are mixed in the following proportion: one part alcohol and two parts peroxide. Dip the sponge in the solution and cover all dirty areas with the liquid. After 20 minutes, rinse with water. Here's how to clean alcohol and peroxide from rust without leaving a trace.

Limescale

It comes off if you clean the bathtub soda and vinegar.

• Mix baking soda with baking soda, apply to the surface of the product, and leave for 30 minutes. After this, rub a little and rinse with water.
• Soak paper towels in vinegar and cover the entire inner surface baths. After 5 hours, the towels are removed and the product is washed with water.

What else can you do to clean a bathtub from yellow deposits? Citric acid will help. 100 g of product is dissolved in 400 ml of water. All yellow areas on the bathroom are covered with this product using a sponge.

Within two hours, the coating is repeated at intervals of 10-15 minutes. Then rinse well with water. The procedure is quite tedious, but it will perfectly help clean the yellowness from the bathtub.

It often forms in places where the bathroom is adjacent to the wall. It can be cleaned activated carbon. Coal is mixed with whiteness to a pasty consistency and the composition is distributed over mold fungus. After an hour, wash off with water.

Another effective way using soda. How to clean a bathtub from mold with baking soda? Very simple. It is applied to problem area a fairly thick layer, then pour generously with table vinegar. After the reaction is complete, rinse everything thoroughly with water.

Methods for different types of baths

How to clean an acrylic bathtub?

An acrylic bathtub requires careful, careful handling and the same cleaning. Care should become regular, consisting of rinsing after each use of the product using gentle products.

Prohibited use:

• products containing alkalis and acids. They are destructive to acrylic;
• solutions containing alcohol;
• chlorine bleaches and other products containing this substance.

Wash the acrylic bathtub from limescale with a weak solution of washing powder. If the surface of the product is not damaged, then this method will do the job perfectly.

At home, an acrylic bathtub is washed to remove rust and other deposits with table vinegar (which is preheated) and salt. An alternative could be a mixture of the same table salt and turpentine. The same products will help remove yellowness from an acrylic bathtub.

Since this cleaning method is quite aggressive, test it on an inconspicuous area before using it to clean your acrylic bathtub. Otherwise, the plumbing may deteriorate.

An enamel bathtub has a top layer that is quite thin. Therefore, in this case, all methods of rough cleaning are contraindicated. At home, you can use hydrogen peroxide, ammonia, proven soda and vinegar.

Rust is removed with a mixture of water and soda, which is applied to the stain, left for about one hour and washed off well with water. Soda ash with the addition of baking soda will whiten the surface. Limescale deposits will be removed by ammonia and fresh lemon juice.

You can also clean an enamel bath with mustard. It will not only remove dirt, but also thoroughly disinfect the surface.

How to clean an old cast iron bathtub?

Such plumbing products are typical of old houses. The technology for the production of cast iron bathtubs was based on the addition of zirconium salts to the material from which they were made. It is because of them that yellowed spots form after contact with water.

Wash cast iron bathtubs to remove yellowness with table vinegar. Pour a full bath of water and add 200 ml of essence to it. Leave for 3-4 hours, rinse well with water. This universal cleaning liquid has repeatedly helped housewives in different situations, making ordinary household cleaning better and more effective.

Helps remove rust from your bathtub good way based on soda and liquid soap. A paste is prepared from these components, which is used to rub the rust and its stains.

From strongly old stains ammonia will help out. It should be added to 0.5 cups of liquid soap and spread the composition over the surface of the bathroom. After this procedure, the bath will become shiny again. If you know how to clean an ancient cast-iron bathtub, you won’t have to replace the product with a new one, and it will last for many more years.

Removing other types of contaminants

These two components are the most common types of stains in the bathroom. Even a weakly concentrated solution of manganese will leave dark marks on the surface of the product.

A drop of brilliant green solution will also add color.

Manganese is washed with a solution of hydrogen peroxide and lemon juice (or fresh lemon juice), they will not only quickly discolor the stains that have appeared, but will make the bath shine.

Remove the green stuff with alcohol. However, if the surface of the plumbing fixtures is made of acrylic, then alcohol may be powerless against contamination.

How to clean a bathtub after renovation?

To avoid having to deal with its consequences on a stained bathroom upon completion of the repair work, the product must be protected from contact with building materials. If trouble happens, you can use by the following means.

• Any solvent (for example, white spirit) will help to clean the paint from the bathtub. It is important to work quickly so that the paint does not have time to soak into the surface.
• First wash off the dusty deposits with warm water, then clean with citric acid.

How to clean bathtub sealant?

Sealant is another type of stain on the bathroom. It is used to ensure the reliability of joints and seams. Sooner or later the question arises...

In this case, you can use traditional methods using table salt, but it is better to buy professional products specifically for such cases.

How to clean an old bathtub?

If the bathtub has been in use for many years, then dirt appears on it very quickly. They penetrate into all microcracks that have formed on the surface over time.

Not all cleansers can easily restore it to its original appearance. It is better, of course, to replace the plumbing. But if this is not possible, then soda ash will help. The procedure for working with it was described above.

Cleaning chrome surfaces

The taps above the bathtub and shower hoses require no less attention than the plumbing product itself. Limescale and rust also appear there - the first enemies of bathrooms. Chrome covers faucets, bathtub handles and other elements.

WITH chrome surface Universal baking soda, which is applied to the products, will remove rust. You can also use table vinegar or tooth powder. All components are evenly distributed over objects using a sponge or soft cloth. Maintained in this state chrome parts about half an hour, then wash with water.

There are many ways to answer the question of how to clean a bathtub from various contaminants. Follow the above rules and recommendations and your bath will shine. But it's better not to wait spring cleaning, and take care of the product regularly, then you won’t have to waste time and effort on removing significant old stains.