DIY transformable clothes hanger. Floor hangers (including racks) for clothes, suits, shirts, trousers. Homemade clothes hanger for the hallway
Can be easily done with your own hands. It is often used not only in residential apartments both at home and in offices. Of course, such an item can be purchased at a relevant store, but quite often the cost of a hanger is high and not all models are suitable in color and size. This item is perfect solution for a hallway that does not have enough free space. Similar designs, which can be purchased in a store, most often have two sides for free access (out of four). The coat hanger-hook does not have such shortcomings; purchasing and fixing it is as easy as shelling pears. Often, in its manufacture, accessible hooks are used, which are located as close as possible, this subsequently makes it difficult to access the other sides. Ultimately, the floor hanger ends up loaded on one side, which quite often causes it to fall. This is due to the fact that the structure has a too high center of gravity. You may have noticed that not all hangers have hooks for hats and bags. That is why you can come up with your own design, taking into account all the shortcomings of factory products.
Preparation of materials and tools
The floor hanger can be made by any novice craftsman. However, initially it is necessary to prepare a set of tools and materials, among them: self-tapping screws, laminated chipboard, a rotating mechanism, confirmations, a jigsaw, and an edge.
Design features
So, your choice is a floor clothes hanger. By making it yourself, you can save money, because the models presented in stores are quite expensive. However, before starting production, you need to develop a design design, and you should take into account the problems that were described above. This will allow you to get a hanger that will be distinguished by functionality and ease of use. The base of the product will be hollow parallelepipeds, which must be installed on a rotary type base. It has two planes. The rotating mechanism must be located between the supporting bases, which are located below. You can purchase accessories in a specialized store. The mechanism must have bearings that will ensure rotation under a load weighing up to 110 kilograms. The supporting base in the upper plane can be rounded; a jigsaw is used for this.
Preparing parts
If you are making a floor, you will need to initially prepare the parts. The structure is assembled using laminated chipboard, the thickness of the material should be 16 millimeters. The color is selected depending on the features of the interior and other pieces of furniture that are in the hallway. When preparing parts, it is important to maintain right angles, so experts advise ordering the cutting of elements from professionals, but you can do the gluing of the edges yourself.
Edging
Before you make a clothes hanger, you should learn about how edge gluing is done. It has an adhesive base and can be melamine. Its thickness is 0.5 mm or less. The edge is applied to the end of the element, adhesive base it should be facing down. Then it is ironed with an iron, which should not be heated. Until the edge has cooled down, it is smoothed using a dry rag. At the next stage, the edges are processed; excess edges will need to be removed using sandpaper and a sharp knife.
Workpiece dimensions
In order to get a clothes hanger on wheels, you will need to prepare a square bottom base with a side of 560 millimeters. The top base should have a side equivalent to 380 millimeters. The side elements of the lower part are made in quantities of 2 pieces, the dimensions of each should be 600x300 millimeters. All other parts are made in the amount of 2 pieces, this applies to the internal side elements that will make up the lower part. The dimensions of each given workpiece must be 600x267 millimeters. The upper and lower parts will have a square shape with a side of 267 mm. Similar parts are made with a square side of 167 millimeters.
The side elements should have dimensions equal to 1200x200 millimeters. The side inner parts of the top have dimensions that are 1200x167 millimeters.
Carrying out the assembly
You can purchase a metal clothes hanger in a store - this is easier to do than making it yourself. But if you decide to make your own floor structure from wood, then for assembly you need to use confirmations with dimensions of 50x70 millimeters. For them, holes located at the ends are pre-prepared. To do this, use a 5 mm drill. The depth of the holes should be 60 millimeters. Holes in the plane must have a depth equivalent to 8 millimeters. They need to be done right through. There is no need to be afraid that the fastener heads will be visible - later they can be hidden using plugs. You can also make a wall-mounted clothes hanger with your own hands. To do this, you need to prepare a laminated chipboard strip, several hooks and fasteners. All these components are connected to each other, and then the structure is hung on the wall. In the case of a floor structure, everything is different. The hanger will rotate due to the presence rotary mechanism, it is fixed with 4x16 mm screws.
The rotating mechanism has a one-piece design, and it is attached to the base by creating technological holes 10 millimeters deep. Initially, markings have to be made. After the hanger is assembled, the fasteners will be hidden by the top plane. The hanger can be equipped with different hooks. Thus, the top ones may be longer, allowing them to be used for hats. The middle ones are intended for children's clothing, but as for the lower ones, bags can be placed on them. The structure is stable due to the fact that the center of gravity moves closer to the floor surface.
Alternative option
A wall-mounted clothes hanger in the hallway can also be made by you. To do this, you need to prepare a board, timber, and hooks. The board must have the following sections: 25x150, 50x100, and 25x80 millimeters. As for the timber, it must have square section with a side of 100 millimeters. The base will be a beam, which is marked taking into account required length and is cut off. If the hanger is not wall-mounted, but floor-mounted, then legs should be attached to it. The structure must be processed with sandpaper. If legs are provided, they must have a length of 350 millimeters. The legs on one side are cut at an angle of 45 degrees, which will add aesthetics. There should be supports at their edges that are fixed. These additional blanks are cut from a board whose cross-section is 25x80 millimeters.
The legs can be strengthened with elements 330 millimeters long. These blanks are made from 50x100 mm boards. There should be four of them. When making a wall-mounted clothes hanger for the hallway, top part can be made more elegant by decorating it with decor, which is made from a 5-centimeter board. The lumber is used to cut a square, which is screwed to the top of the base using two screws. The workpiece is strengthened using fittings, but if decorative element If you want to make it yourself, then it should be deprived of fasteners for screwing. In this case, the workpiece is glued using carpentry compound.
Final works
When making clothes hangers for a closet, it is important to ensure high-quality fasteners. Quite often, not only mechanical, but also glue method. In the latter case, both surfaces should be lubricated. After this, the structure is left until the composition has completely dried and only then can it be treated with varnish or stain. The mixture is applied in several layers, between each of which the product should be left until completely dry. Afterwards the surface is treated with sandpaper. Before applying the next layer, the surface must be wiped with a damp cloth. In the process of making clothes hangers for a closet, the above technology can be used. However, no matter what design you choose, if it is based on wood, all corners must be cleaned, and the same applies to the ends of the structure. This can be done between applying layers, then the surface will acquire the effect of antiquity.
25.11.2016 23:54
Not every home has space for a full-fledged dressing room or spacious closet. And even if there are some, it doesn’t mean that there is no problem where to throw a robe or handbag - a hanger at hand will never be superfluous.
The simplest, most stylish and at the same time cheapest idea is to make a hanger from a tree trunk or branch with your own hands. The Rustic style is very fashionable today - residents of big cities strive to bring a small piece of living nature into their interior. And even homeowners who live outside the city prefer the atmosphere of country life both outside and inside the house.
Quite a lot of commercial furniture brands turn their designs into rustic shapes and textures, so is it worth spending a decent amount to purchase a stylish piece of furniture if you can make it yourself without much effort?
Below you will see hangers created by designers as replicas, imitation of a natural tree trunk and hangers made from a real trunk.
A floor hanger made from a tree trunk in a bedroom or hallway will not only solve the problem of where to hang clothes or accessories, but will also become a pleasant accent in the interior design.
A suitable trunk can be found in the nearest park or forest. It is enough to trim unnecessary branches with pruners, keeping their “hooks” at the base of the trunk the right size. You can remove the bark from the trunk or leave it in its natural form - it all depends on the intended design.
In addition, a wooden hanger can be painted in any color to match the interior colors or play with contrast.
For a floor hanger, it is enough to come up with a strong base as a weighting agent - this can be a heavy piece of wood or a support.
If you can find a high enough trunk, the hanger can be installed to the full height of the ceiling. Here you will need accuracy of calculation, but you will not need additional fasteners.
Several small sections can be cut from a tree trunk with branches. By mounting them on a wall, on a board, or in a charming frame, you have a cute and highly functional multi-hook hanger. This suspension system does not take up space, is very convenient and at the same time has a surprisingly cute decorative effect. A hanger made of wooden hooks from a tree trunk would be perfect in the bathroom or hallway, and, of course, in the kitchen - there are always a lot of little things that need to be hung.
Another interesting way attract a tree trunk to decorate your home - it can be hung from the ceiling or in window opening. And this hanging Rustic decor can serve as a support for hangers.
You can use a cute tree branch to store your favorite jewelry, costume jewelry, or simply decorate it with family photos, homemade hearts, and beautiful trinkets.
Tree trunk, branches, cuts and cuts are often used in decoration Scandinavian interiors or country houses, for example, a chalet - so actively use this rustic decor in the design of such interiors. Rustic accents are also added to cold industrial interiors, loft, and simpunk to give the interior a little warm touch.
Below you will see many amazing examples of how to use a tree trunk in interior design and home decoration - a hanger made from a tree trunk or branch with your own hands! Get inspired!
Pay attention - what a zeal for nature modern designers- in the decor we see: like wood, like moss and even dirty boots... like)
DIY interior design ideas, interior design ideas, DIY decor ideas - GET INSPIRED!
What can you make from driftwood for your home?
Shelves, display racks from stairs
Clothes hangers are a must-have attribute in every home, as otherwise arranging outerwear is quite problematic. In addition, floor hangers are also useful in the bedroom, so as not to put clothes in the closet every night and not to use chairs or armchairs. But beautiful furniture in the store is quite expensive, so The best decision This is a DIY floor clothes hanger. After all, from inexpensive materials, you can make original and beautiful hangers that will significantly decorate and make your interior comfortable.
You can make a clothes hanger from almost any material. But if you are going to do it yourself, you should approach the choice of material carefully.
Wood and plywood are best suited for work; these are the most practical and flexible materials that are easy to work with. If products made from them are used in the home, they are guaranteed not to be exposed to moisture and their service life will increase significantly.
Working with metal or plastic at home is quite difficult, so you should not choose these materials. It is worth considering the fact that sometimes a significant load is placed on the hanger, so you need to use materials of appropriate strength so that the furniture does not break.
Examples of floor hangers using metal water pipes
When you buy wood or plywood, pay attention to their quality, because this is the key to making the hanger look beautiful. In most cases, wood products are coated only with stain or varnish, so the texture remains visible on the surface.
Floor hanger in the form of a tree
Making a floor hanger is easy and doesn't require many tools or materials. This hanger is made of two sheets of plywood, approximately 70x170 cm in size, and 18 mm thick. To make it you only need glue, a jigsaw and sandpaper. The work itself will also not take much time and you will not find such hangers in any furniture store.
First you need to draw the outline of the future product on one of the sheets of plywood. This can be done simply by transferring a drawing to scale onto plywood. The most important thing is that the legs are of sufficient width - about 60 centimeters. This is necessary for stability, since if you make them narrow, the hanger will fall if you hang heavy winter clothes on it.
In order not to draw a picture on the second sheet of plywood, before you start cutting, you need to simply fasten the two sheets of plywood together using self-tapping screws or clamps. It's best to use clamps, moving them as you cut the plywood. Make sure that the sheets do not move and that both blanks are the same.
To connect the blanks and turn them into a hanger, you need to make two slits. On one workpiece you need to make a slot to the middle from the top, and on the second from the bottom. The width of the slot should correspond to the thickness of the plywood.
Both slots with inside you need to treat it well with glue, and then put the blanks on one another. As a result, you will have an original and beautiful floor clothes hanger, which only needs to be sanded and painted.
As you can see, making a floor hanger with your own hands is not a difficult task even for a beginner. And you can decorate it in any way. You can simply coat the plywood with stain, varnish, or paint it. If you reduce the size, you get a children's clothes hanger that will decorate any room, especially if it is painted.
Wooden hangers made from natural elements
good design solution are stands made of natural natural materials. Or rather, from a tree trunk. This clothes hanger is very easy to make and does not require special tools and materials.
First you need to find a good piece of dry wood, it should be completely dry and free of rot. The type of wood practically does not matter, but it is worth remembering that conifers with a high resin content it is better not to use. Glue may ooze from the barrel even after it has completely dried. Best to use hardwoods with a well-branched trunk to provide more space for clothing.
First you need to completely clear the trunk of bark, cut the lower branches to a height of one meter, and shorten the upper ones so that there are branches on which you can hang clothes. Then you need to completely sand the stand and clean it of dirt and irregularities. If the wood is damaged by a bark beetle, then this does not interfere, since it creates quite beautiful pattern, which fits perfectly into the design of the hanger.
The second stage of the work is the stand, since the tree trunk cannot stand on its own. The most important thing to remember here is that the more massive the stand, the more stable the hanger will be. You can make a stand from a thick board, it will the best option for work. The stand itself can be given any shape, it can be a circle, square, triangle or any other geometric or abstract shape.
You can attach the stand to the stand different ways. For example, if the lower part of the tree is quite thick, then you can simply screw the board to it with self-tapping screws. The screw heads will be at the bottom, so they will not be visible. If the bottom of the tree is relatively thin, then you can fix it in a stand by making a hole in it; it should be no larger than the diameter of the trunk itself. Then simply attach the stand to the stand with glue - this method is the most reliable.
It is worth remembering one feature of the tree trunk - it has a cone shape. Therefore, it is better to make the hole in the stand smaller than its diameter, and carefully trim the bottom of the tree. This way, the stand will hold well and there will be no gaps at the joint.
When the wooden hanger is ready, you just need to coat it with varnish, since it is better to preserve the natural color of the wood. But if a light-colored hanger doesn’t suit your design, then you can easily use stain or dark paint.
Original and very practical option floor hanger, which is easy to make, make it in the form of a ladder. This accessory is perfect for the bedroom if you don’t like to use an armchair or the back of a chair to store clothes in the evening.
For production you will need only two bars approximately 5x5 thick and 170-180 cm long. Also for the crossbars you will need three smaller bars, the length of which will be equal to the width of the hanger. All bars are sanded or processed with a plane. To make the hanger look beautiful and neat, it is best to connect the parts together using spikes.
Then you just need to cover the hanger with stain and varnish. A convenient and comfortable clothes rack is ready. As you can see, this DIY clothes rack is very simple and is suitable for a bedroom or summer house.
Like anyone wooden object interior, such a stand for clothes will look great in almost any interior and you can place things on it so that they do not wrinkle. If desired, you can also use several coat hangers that can be hung on top bar. If during the day the hanger is in the way, you can simply take it and place it standing, since it is light and does not attach to anything.
Other types of floor hangers
Although floor stand for clothes is a rather simple element of the interior, but there are many ways to make it. You just need to show a little imagination and remember that the structure must be stable. Otherwise, you can make clothes racks from any available material.
You also don’t need any special tools for the job. Of course, there are hangers made on lathe made of wood, but they are made by professional carpenters.
Remember that any piece of furniture you personally make will not only be the next step in your skill. If you do something with your own hands, then this thing will be unique and one of a kind.
In addition, by making furnishing elements yourself, you not only show your individuality, but also save significantly. Since even the most simple racks for clothes in a store will cost an order of magnitude more than material for crafts. And this is another incentive to start making things yourself, since the products self made, are even more expensive.
Floor hanger, one of the most simple tasks. Therefore, you should not buy it in a store, but rather make it yourself.
As you know, not only the theater begins with a hanger, but also a visit to other less pretentious institutions. Every housewife, of course, wants her house to be remembered by guests not just for its rich treats, but for its unique furniture.
More than just a decorative element
Making an interior item both beautiful and multifunctional is not easy. But with regard to a clothes hanger, these two points are fundamental, because the limited number square meters in the hallway obliges you to save not only free space, but also “working” space.
For small rooms, only floor-mounted hanger options should be considered. Why?
Firstly, the things that should be in the hallway belong to the demi-season period or the cold season. Jackets, fur coats, and down jackets weigh a lot, which is why ordinary hangers rarely support their weight. And when not only parents’ coats are hung on one hanger, but also children’s jackets, guests’ raincoats, grandmothers’ umbrellas, even the most persistent “fighters” cannot withstand this load. The “correct” floor hanger allows you to place all the necessary things, and can also easily support their weight!
Secondly, winter and demi-season coats often differ radically in weight. As you know, it is impossible to put fighters of different weight categories into the ring. The same case: if a September raincoat hangs on one side of the scale, and a fox fur coat is piled on the other, the mechanism will crack. The stains from dirt stains will have to be removed from the beautiful fur of the fur coat, and the unstable hanger will need to be repaired.
Thirdly, things need space and air - without it they wither away. Lack of the required distance between several warm things gives rise to an unpleasant odor and infections. That is why it is important to leave some space between the fur of a fur coat and, for example, a sheepskin coat. Floor-standing ones with a strong rod allow you to correctly place almost all warm items into categories without the risk of mold, unpleasant deposits or suffocating odors.
Here she is, my only one...
Unfortunately, often already ready-made options floor hangers are designed for large apartments or private houses, and the inhabitants of modest “one-room” or “two-room” apartments are allowed to be content only with wall-mounted fragile mechanisms: compact, but absolutely impractical.
In this case, you can develop the design yourself or entrust such a task to professional designer. He will take into account your wishes, the number of free meters in the hallway, the color scheme and the amount of warm clothing.
Which options to choose from?
Corner
The high ceilings of the hallway (in this part of the apartment the ceiling can reach a height of 3-3.5 meters) allow you to make a closet that reaches right up to the ceiling. This allows, in addition to the hanger itself, to fill the space inside the cabinet with various useful internals:
- open/closed shelves;
- retractable drawers/just drawers;
- boxes/hooks.
Your hanger turns from an ordinary rod into a multifunctional closet in which you can hide everything: from shoes and umbrellas to a butterfly net or fishing rods.
Mirror corner
One of the varieties is angular, appearance which brings it as close as possible to a wardrobe (including in terms of multifunctionality). It makes sense to install a large number of mirrors in a closet only if the lighting in your hallway is installed correctly. If desired, you can add wall lamps or mini floor lamps, but you must take into account that such a light source is still not enough if you want, for example, to apply makeup or try on a new skirt.
If you decide to install a mirror, then you need to choose the most convenient option for you: external or internal. The external mirror will have to be washed more often, but there will be no problems with light (if other lamps are present). The interior will be in constant twilight, but the surface will always remain clean. The choice is yours.
Hook hanger
The design of the hook hanger, known to us from the old Soviet times, has now been significantly improved. We are all accustomed to the fact that hooks are usually located on a crossbar, which is attached directly to the wall. This makes the structure entirely dependent on the strength of the wall and the strength of the material from which it is made. Typically, hangers of this design are left for the bathroom or pantry: these rooms do not require much physical effort from the furniture.
Meanwhile, correct design a floor hanger with a small number of hooks allows you to increase functionality and solve some problems associated with the short stature of the apartment’s inhabitants. Floor-standing usually imply the presence top shelf, on which they put:
- hats;
- scarves;
- gloves;
- umbrellas and other necessary items.
This is not always the right decision for families with children or for adults whose height is less than 170 cm: if, for example, a person comes to visit you who cannot reach the cherished line, this can put you in an awkward position.
The decision to put things on the lower shelves also poses some difficulties, since many apartments have pets: your beret may not be happy.
Panel hanger - for a classic style
In this case, the only the right decision There will be either a closed wardrobe or special hooks for small items. Of course, the entire hanger cannot consist of such hooks. But they will be an excellent addition to those elements that are already in the design.
Actually, a wardrobe
A sliding wardrobe is now one of the most common, most expensive and, unfortunately, most impractical options. What's the catch here?
- A standard wardrobe takes up too much space. This is a great option for a bedroom or living room, but there is too much free space in the hallway. Most wardrobes are designed according to the same principle: two doors + several shelves + several pencil cases + several hooks. Any additions are considered unnecessary, since this model has gone through fire and water.
- The assembly of sliding wardrobes makes them very fragile for such a conflict zone as the hallway. Agree, on this small area Anything can happen in space: soccer ball will break the outer glass of the cabinet, the cat will jump into the bottom pencil case, and the door will slam shut, the neighbor who came in to buy salt will accidentally hit the door with his shoulder, and she will jump out of the rut. Movable structures are always not the best solution for rooms in which there is active movement.
Open hanger bench
This is one of the most conservative and most acceptable solutions for small apartments. A hanger-bench usually consists of the following modules:
- several upper cabinets (options with open shelves or mezzanine models are possible);
- several lower pencil cases for shoes (also possible open shelves or retractable shelf boxes);
- base with attached various models hooks and crossbar (sometimes a mirror is added);
- shop.
These are rarely metal or plastic. The design of this somewhat old-fashioned, but very practical unit is carried out exclusively by people who know a lot about organizing space. Products are usually made of wood; hooks, base and crossbars in this case should be metal or also wooden.
In addition to durability, it is good for apartments where elderly or disabled people live. A stool next to the wardrobe takes up an unacceptable amount of space. The bench hanger is more compact. The option that, between you and me, you can think about...
Hanger bar
“Minimalism is our everything,” this phrase has practically become the motto of postmodern interior design. Small apartment With small rooms And small-sized furniture Needs a small hanger.
The hanger-bar can fit everything that a couple needs in a cozy “one-room apartment”:
- several warm coats;
- several down jackets;
- demi-season raincoats;
- sport jacket;
- vest;
- handkerchief;
- several hats.
The stand below can accommodate several (6-8) pairs of shoes (for one season). True, shoes will have to be removed from time to time (alternating summer and winter seasons), but the same problem arises in the case of a wardrobe.
Remember a simple truth: the more space you have for things, the more large quantity things are trying to fill this space.
Advice
When purchasing a crossbar, pay attention to the material from which the crossbar is made, the holders and the fastenings themselves. The rod must withstand the weight of coats and jackets, and also all the hangers that you will attach to this crossbar.
Below there may be an additional shelf for shoes, made of a material that will not be too easily soiled (pay attention to the color).
Have you chosen a type, but are still confused about the material from which it will be made? Both the appearance and its strength depend on the material.
What to choose from?
Plastic, wood, metal: which is more practical?
Plastic
Hangers made of plastic are the most impractical of all that are offered to us furniture market. Weak strength, inability to attach heavy and strong fasteners, fragility. Things made of plastic are now becoming less and less common in rooms where a child may be.
Plastic furniture offers a wealth of design solutions:
- color mixing;
- the ability to melt and create original shapes;
- matte and glossy.
This is especially true for manufacturers of sliding wardrobes: what more beautiful furniture, the faster the owner will be found. Meanwhile, after just a few months, the same owner is forced to take the warranty card out of the box, since a cabinet or shelf made of plastic will show its real face after just a few weeks of use: a screw will fly off, the glossy surface will be scratched, or even worse: the door will fall off...
Sad prospect, isn't it?
Metal
Good strength, but not too much practicality - that's what metal cabinets are all about. Metal structures can withstand a giant’s outerwear, a dozen of the heaviest sheepskin coats, and many pairs of boots... However, the obsessive shine and too sharp reaction to temperature changes may not be very appealing to everyone. floor covering, and wall cladding.
Often, due to too sharp a temperature change (condensation has formed on the hanger), excess moisture begins to have a decomposing effect on the space of the wall near the hanger: wallpaper peels off, plaster “flows,” and unpleasant streaks appear on the paint. Sometimes parquet or linoleum may become deformed. Moreover, the deformation is caused not so much by condensation as by the large weight of the hanger: metal constructions weigh up to several tens of kilograms.
The external strength is very attractive for a floor hanger. But is this characteristic worth it? cosmetic repairs hallway?
Tree
Last but not least, material.
1 First, quality. Wood furniture (made from real wood, not recycled sawdust) is known for its durability.
2 Secondly, good interaction with external environment. Wood does not give in to internal deformation, and does not spoil the floor, walls, or ceiling. “Sweat”, “condensation” - these are words that are not known to wooden furniture. When you buy a coat rack made from durable wood, know that it won't ruin the color of your walls, warp your hardwood floors, or stain your ceiling.
3 Thirdly, wood is a “healthy” material. Trend towards improvement environment manifests itself most fully in the furniture industry: interior items began to be made from environmentally friendly materials. This is not the most cheap option. But, on the other hand, what could be safer for your health and the health of your child than wooden furniture. Natural material promises no unpleasant odor - enough important criterion for hangers closed type. Winter items that must be stored in this makeshift pantry during the long spring, autumn and summer months (even if they are packed in covers) absorb unpleasant odors which produces furniture. For environmentally friendly wood, this problem does not exist: you can forget about mothballs. Clothes will keep marketable condition and “commercial smell”.
4 Fourthly, wooden hangers look very advantageous, for example, with stands for keys or wooden baskets for umbrellas. It is very difficult to select appropriate color scheme and the design of little things for furniture made of plastic or, especially, metal. You have to buy them either as a set, or make individual elements to order after you have decided on the main accent (in the case of a small hallway, this accent will almost always be a hanger). Wood goes well not only with other wooden products, but also with furniture made of plastic and metal.
You need to store clothes in such a way that they do not lose their attractiveness, and it is always easy to find the right outfit. But what will it be - a few nails driven into the wall, or a stylish and elegant floor hanger? A floor clothes hanger can become not only a functional item, but also a significant element of the interior, adding notes of a certain style and charm to it.
Pros and cons of floor hangers
The main disadvantage of the floor structure is its questionable stability, especially for inexpensive products. But if you think in advance about what kind of things the future hanger will be used for, you can choose a high-quality, fairly stable and safe model.
Advantages of floor hangers:
- Mobility. This part can be easily moved to another location. If you have rearranged, renovated, added a new interior element to the room, or vice versa - freed up space from unnecessary things, perhaps now the hanger will look more harmonious in another place.
- No installation work. When installing wall hanger often require holes in the wall, which damage decorative coating. When dismantling, the holes will be visible and the wall fragment will have to be repaired. When you no longer need the floor clothes holder, simply hide it in utility room in a matter of minutes.
- Wide range of models. You can choose a floor hanger to suit any interior style, for any type of clothing, accessories and even shoes. They differ in size, material of manufacture, and external design.
Wooden floor clothes hanger
A wooden hanger is the most popular option. The wood is strong and durable, therefore, such a hanger will be stable and reliable. On sale there are varnished and painted products, carved models, as well as the most laconic ones, which, by the way, you can make yourself. Wooden stand for clothes will be appropriate in many style directions - from traditional classics to fashionable loft. Such a hanger will decorate a room in a country style, as well as a room in a modern eco-style.
Metal floor clothes hanger
This hanger has an impressive weight, so there is no doubt about its stability. Most often, metal hangers are made of chromed aluminum, which can be painted in a variety of colors. Separately, it is worth mentioning forged floor hangers. These are products that are not inferior in practical qualities to ordinary metal ones, but have enhanced aesthetic properties. A forged hanger is a unique and elegant decoration for your hallway or verandas.
Floor-standing clothes hanger IKEA
Holders made from a variety of materials can be found at IKEA. An IKEA hanger can also be a combination of materials. For example, plastic hangers are unstable due to their low weight, so manufacturers use a hybrid of plastic and metal. Also, metal and wooden hangers are equipped with rubber or plastic tips on hooks (so as not to spoil clothes) and legs (to protect the floor covering).
