Tips for making quail cages. How to make cages for quails of different sizes with your own hands Homemade cages for quails
Raising quails is considered a profitable activity. Thus, poultry can be bred for eggs or meat, as well as for sale. Due to their compact size, quails can be kept in enclosures, small sheds or on the veranda. Moreover, some people raise poultry on their balconies. To get healthy young animals and a large amount of eggs and meat, you need to take a responsible approach to creating cells with your own hands.
Cell requirements
First of all, similar design must be reliable. We are talking about the absence of cracks and the use good stuff, thanks to which it will be possible to avoid injury to quails and simplify cleaning of the premises.
The cages are installed in a room with heating and no drafts. You will also need high-quality ventilation , which allows you to maintain the health of birds and avoid the appearance unpleasant odor indoors. When breeding quails on the balcony, direct sunlight must be avoided.
All cages should rise 30 cm from the floor. As a rule, they are installed near the wall, but if this is not possible, they are placed on small racks. If too large a stock is being raised, you can put the cages in tiers, which will save space.
One adult will require an area of 100–170 cm². Accordingly, 60–75 adult quails can fit per 1 m².
Each cell must have:
- feeder;
- drinking bowl;
- egg collector;
- litter tray.
Cells shouldn't be big. Their front wall is a door, which is attached to the structure using wire or hinges. You also need to make sure there are bumpers on the sides.
The cell sizes are typically 100 cm long, 40 cm wide and 20 cm high.
Types of cells
Choose suitable design not easy, because there are many varieties. They are divided into several groups depending on a number of factors:
Making a quail cage with your own hands
To make a cage for breeding quails with your own hands, you need to decide on the material, as well as first develop a drawing taking into account the size of the room where the birds will be kept.
Mesh construction
Beginning quail breeders should keep 15–20 adult quails in a mesh cage. In this case, you will need a frame to which the walls and bottom, as well as the ceiling, are attached. Cage sizes may vary. The main thing is that the birds were not crowded.
You can make a frameless product from the mesh with your own hands:
- The material is carefully bent to create a box without side walls, and then it is connected with wire.
- The egg collector is a continuation of the floor with a slope of 8º. A fine mesh sheet of mesh is placed under it.
- The door is made in the same way as when creating a frame cage.
Plywood construction
Plywood cage is optimal for raising quails in an apartment. The material used is not only plywood, but also chipboard. In addition, you will need a sheet of metal mesh. The plywood should be pre-treated with an antiseptic.
- First you need to cut out the ceiling, side and end wall. The dimensions of these parts are 700x350 mm, 350x200 and 700x200 mm, respectively.
- Openings for ventilation and lighting are prepared in the side walls. Their diameter should be about 30 mm.
- To assemble all parts we use wooden corners, as well as self-tapping screws.
- A floor measuring 700x350 mm is prepared from the mesh. It is attached to the finished structure using a construction stapler or nails.
- The mesh door is fixed to the front wall with awnings.
Plastic construction
To create plastic cage Do-it-yourself polypropylene is used. Finished design turns out to be very compact, while about 50 quails fit here. Here you can raise quails for meat or keep laying hens.
Advantages of plastic cages:
- It is best to use 2 bunker feeders for feeding quails, which are attached to the front wall. The drinking bowl is fixed on the back wall.
- Several newspapers should be placed under the bottom, since quail droppings partially fall down during the disinfection of the trays. To avoid this, it is worth having 2 pallets.
- To eliminate unpleasant odors, you need to clean the floor at least once a day.
- Anthers should be placed just above the cage, which will prevent the air from drying out.
- It is recommended to install a whole battery of cages to increase the number of quails. In this case, it is necessary to ensure that all doors open from the front, and the distance from the bottom cage to the floor exceeds 1 m.
Do-it-yourself quail cages play a big role in breeding these birds. It seems that it is much easier to buy this device at a pet store, but this is not so. Despite its miniature size, quail loves space, which purchased products cannot always provide. This is why many quail breeders prefer to use homemade cages. There is nothing complicated in making such a bird house; you only need drawings, a set of tools and minimal skills in handling them.
Basic requirements for construction
There are houses for breeding quails three types. They are classified according to the material from which they are made. So, the most common cells are from:
- plywood;
- plastic;
- metal mesh.
If you are just thinking about breeding quails and you have a couple of birds, then you can use a cage for domestic rodents. Or you can buy any bird cage at a pet store. But in the near future we will have to think about relocating the birds to a more spacious house.
If you make such a house with your own hands, you can not only save an impressive amount, but also create ideal conditions for the birds. As practice shows, these crumbs are very demanding in terms of living conditions.
The following requirements apply to cages intended for quail breeding:
- complete absence of dampness. Failure to comply with this condition may lead to illness and death of the birds;
- The grid cells must be of a strictly defined size. When choosing sizes, it is necessary to take into account the appearance of chicks. If an adult quail cannot crawl through a mesh cell, this does not mean that the chick will not be able to overcome this obstacle;
- it is necessary to maintain a certain temperature regime. Optimal temperature for quails about 20 degrees. To maintain the temperature within normal limits, it is recommended to use cell batteries;
- the size of the structure is determined by the number of birds. There should be at least 15 centimeters of free space per adult male.
Important! When arranging cages, it is necessary to take into account not only adults. Places for laying hens and chicks must be provided!
In addition, each bird house should be equipped with drinkers, feeders, litter trays and devices for collecting eggs. By providing these conditions, quail breeding will be very productive.
Perhaps someone will be intimidated by such an impressive list of requirements. Don't worry, everything is not as complicated as it seems at first glance. But by providing quails with everything necessary for their life, you can count on greater egg production from the birds. It is this factor that plays a big role in the breeding of these birds.
Making your own quail cage
As mentioned above, quail houses are made from certain materials. In this section we will look at self-production each type of cell key features, advantages and disadvantages.
For greater convenience, all of the above designs are suitable for keeping 20 adult quails. If you have more birds, then you should make cages for quails according to the recommendations given, but using larger sizes.
The mesh for such a design should be aluminum or metal with a galvanized coating. Before starting work, it would be useful to make drawings of the future cage; this will greatly facilitate the work.
The dimensions of the structure are: 70 cm length, 35 cm height and 20 cm width. For the frame, you can use wooden blocks or metal corners. It should be noted right away that working with wood is much easier.
Assembly diagram
Wooden blocks are fastened together with nails or self-tapping screws, forming the frame of the future cage.
The mesh for the walls is cut to the size of the sidewalls and attached to the frame. To do this, you can use furniture nails or a stapler.
Important! The tips of the nails should not protrude from inside cells! Birds may get injured!
The mesh for making the floor is cut taking into account the egg collector. The length of this device is about 10 centimeters. There should be a small gap left from the edge of the front wall through which the eggs will roll. One end should be bent upward, and the edges should be equipped with small sides. This will help prevent the eggs from falling.
The floor is installed at a slight angle to the front wall of the cage.
The door is usually made in the front wall of the structure. The size should be chosen in such a way that you can stick your hand in and freely reach any corner of the cage. The door is also made of mesh; canopies can be used for fixation.
Advantages. A house made of metal mesh is durable. In addition, it is quite hygienic and does not interfere with the penetration of ultraviolet rays. Mesh cages are not susceptible to dampness and are easily disinfected. Simply transplant the birds and pour boiling water over the structure.
Flaws. During manufacturing, the mesh bends poorly and is cut unevenly. In the absence of skills in working with this material, the cell may have an unpresentable appearance. appearance. In addition, drafts are possible. To maintain the required temperature conditions, you will have to install cellular batteries.
Plywood cages
Almost everyone made birdhouses in childhood. In the manufacture of this design the principle is the same. Typically, such cells are made two-level to highlight separate room for laying hens. For ease of manufacture, it is recommended to make preliminary drawings.
Assembly diagram
The dimensions of a plywood house do not differ from the mesh construction version. These parameters have already been given above, so there is no point in repeating them.
The side walls are made of solid sheets of plywood or fiberboard. The material is sawn to size and fastened together with wooden blocks. It is recommended to make small ventilation holes. The ventilation size should not exceed 2.5 centimeters in diameter.
The back wall, for greater structural reliability, can be made of fiberboard. Small nails or self-tapping screws are suitable as fasteners. For greater reliability of connections, you can pre-treat the joints with wood glue.
The front wall of the cage is covered with a mesh. The floor is made of the same material. An egg receptacle must be provided in the section for laying hens.
The door is installed on the front wall according to the same principle as in mesh cages.
All wooden parts must be treated with an antiseptic or varnished.
Advantages. Ease of manufacture and availability of materials. Such devices look quite presentable and are practical to use.
Flaws. Wood absorbs moisture well, so the formation of dampness is possible. It is recommended to periodically dry the cells. In addition, wood is short-lived, so if handled carelessly, such a structure can easily be damaged.
Quite modern and practical look cages for quails. Even a schoolchild can assemble this device, which is why they are very popular among quail breeders.
To make such a cage you will need plastic boxes for storing vegetables. Get it required material possible at food markets. If you show the right charm and persuasion skills, you can get the source material for free.
Assembly diagram
To make a plastic cage you will need three boxes. One tall (at least 17 centimeters) and two smaller.
It is necessary to cut down the corners protruding from the drawers. To do this, you can use a hacksaw for metal or wood. Plastic is easy to process.
One of the low drawers will act as a pallet. A large box is installed on it; this will be the body of the cage. The remaining box is installed on top - the ceiling.
In this design, the door will be located on top. To do this, the bottom of the top drawer is sawed off on three sides. This way it can be bent to the side.
Advantages. Simplicity of design; no drawings are required for the manufacture of such cells. Hygiene and durability of the material. Plastic is easy to clean and can last long time. In addition, the birds will always be under your visual control.
Flaws. Limited sizes. If there are a fair number of birds, you will need more cages, and accordingly you will have to look for a larger room for keeping quails. It is difficult to make an egg collector. Perhaps professional breeders have their own secrets on how to make this device, but we do not know them. Therefore, you will have to use your imagination.
If you don’t have the opportunity or desire to buy it in a store, then you can easily make both an incubator and a quail cage with your own hands: the drawings and photos are free, and the material can be found at any construction market.
The size of the cages depends on how many individuals you plan to keep. One quail requires an average of 100 square meters. cm area. However, for hygienic reasons, you should not keep more than 20 birds in one cage.
Quail breeding equipment
The cage must be made taking into account what kind of birds will be kept in it - chicks, young animals, for meat or for eggs. For example, brooder cages are made for chicks.
Among the features:
1. Cages for egg-laying quails are made with a sloping floor equipped with an egg collector. The angle of inclination should be 7-8 degrees and have a limiter outside the cage so that the eggs are not broken.
2. Meat quails are kept in cages with a low ceiling - this is how they become inactive and gain weight quickly.
In addition, such content promotes a later onset of puberty, which improves taste and beneficial properties quail meat.
A do-it-yourself quail cage (free drawings and photos) is made of metal mesh on a wooden frame. Also for production you will need: nails, screws, mesh, wooden blocks of different lengths for the frame, mesh and plywood for the walls.
Cell sizes
The sizes of the cages vary mainly only in length, with the exception of cages for meat quails - there the height also decreases. Standard sizes: height 20-25 cm (for meat 15-20 cm), width 30-35 cm, length - 45-70 cm.
Size wooden block for a frame 2.5x5 cm, if the frame is metal, then the corners are 2.5x2.5 cm.
The mesh for the floor of the cage is no less than 1.6x2.4 cm, except for cages for chicks (1x1 cm). Mesh for side walls – 3.2x4.8 cm.
Assembly sequence:
- 1. We assemble a frame from bars. There should be 4 of them: 70 (length), 30 (width) and 15-25 (height) cm. The wooden frame is connected with self-tapping screws, the metal one can be welded or bolted together.
- 2. The mesh is cut to fit the size of the walls. It is attached to the frame with nails (to wood) or wire (to metal). When using wooden frame You can also use a furniture stapler to secure the mesh.
- 3. When cutting out the front wall, it is necessary to take into account the presence of the door. The size should be such that you can reach any corner of the cage with your hand. The door is also cut from mesh and secured with awnings.
- 4. When cutting out the floor, lay an egg collector. An inclined floor (7-8º) and a protrusion from the edge of the wall of 5-6 cm are made for it. The gap between the bottom of the wall and the floor is made of 3-4 cm for unhindered rolling of the eggs.
- 5. Place a tray under the bottom of the cage. It is better to make it from metal or plastic - this is easier to clean. If you have a wooden pallet, you can line the bottom with newspaper.
- 6. Before putting a new cage into operation, you need to check the absence of protruding nails, mesh edges, and tips of screws. And also the reliability of fastening the door.
Eat different options how to make a cage for quails with your own hands, for example, a frameless cage made of mesh, there are drawings and photos (free). You can also do it completely budget option– from plastic mesh vegetable boxes.
Video - DIY quail cage
If you can’t make it, you can purchase a ready-made one. They are available in both wood and plastic.
Increasingly grown on personal plots quails, although they are the smallest variety poultry, but for their residence the poultry farmer will have to create comfortable living conditions. You can build cages for quails from different materials, while the task can be done not only by professionals, but also by home craftsmen armed minimum set tools.
Varieties and requirements for quail cages
Before you start work, it is important to know that separate housing is required for different age categories, and in separate cells they contain:
- chicks aged from 1 to 10 days;
- young animals up to one and a half months of age;
- adult livestock;
- laying hens that produce table eggs;
- quail for meat purposes;
- parent groups.
A do-it-yourself brooder for quails differs from other cages by serious protection from cold and drafts, and necessarily by a lighting and heating system for small chicks that do not tolerate cooling and overheating well. Home craftsmen prefer to make all walls, except the front, from plywood, fiberboard or chipboard. The floor and ceiling of this design are made of fine mesh, through which debris and bird droppings easily penetrate, and the quails themselves move confidently and do not risk injuring their legs.
For this age, a self-built brooder for quails is equipped with a feeder and drinking bowl. This equipment, as well as the heater and lamps, are mounted inside the cage.
The video, which talks about making your own drawings of a quail brooder, will not allow you to make mistakes even for those who for the first time in their life decided to start breeding such an interesting bird as quail.
How older bird, the larger the metal mesh cell can be. The grown young animals are better adapted to the conditions external environment. It does not need a closed space, and open mesh quail cages are much easier to clean.
For adult birds, cages are built at home from a variety of available materials. Not only plywood or chipboard is used, but also metallized mesh, metal and even plastic. Laying hens are housed in specially designed houses with a bottom sloping towards the outside. A gutter is attached to the outside where the laid eggs fall.
In order for meat-producing animals to gain weight better, quail cages are made mesh and rather low to artificially limit the movement of the bird. This technique allows you not only to quickly achieve the desired weight, but also to delay the onset of puberty. Therefore, the meat of such quails is more tender and juicier than that of those raised in ordinary cages.
Before making a quail cage with your own hands, carefully weigh the safety future design, the possibility of its sanitization and cleaning, as well as the correspondence of the size of the house to the number of birds housed in it.
Calculations of the size of future cages for planting quails can be made based on the given standards for a population of 10, 30 and 50 birds. 
DIY quail cage drawings
The most popular and convenient design quail cages are wooden or metal frame, covered with mesh on the outside and on the floor, and on the rest, at the request of the owner, with materials available to him.
The drawing of a homemade quail cage, in the photo, includes:
- 1 - frame;
- 2 - drinking bowl;
- 3 - door;
- 4 - feeder;
- 5 — chute for rolling eggs;
- 6 — cage floor;
- 7 - tray for collecting litter and droppings.
Reliable functional design will take more than one generation of laying hens; it can be installed on the floor, while it is important to provide legs 15–30 cm high, or used as a tier of a “multi-story” structure. This method of placing cages is very helpful for poultry farmers who do not have enough space to install them separately. standing houses feathered pets.
Quail cages assembled in a multi-tiered structure must be securely attached to each other and to the vertical surface of the wall next to which they are located.
If you want to save money and simplify the manufacturing process, the master can abandon the frame. In this case, the drawing of a quail cage shown in the photo will help you cope with the task; even a novice poultry farmer can make such a design with his own hands. The material for the side walls and pallet can be thin metal, strong plywood or fiberboard sheets.
To prevent an egg from falling from an inclined floor, a gutter up to 10 cm wide with a limiter is provided on the outside. The bottom is made of fine metal mesh, suitable for quick and effective cleaning of cells.
DIY quail cage: step-by-step instructions
Homemade designs are simple, affordable and do not require special knowledge to manufacture. It is only important to consider:
- number of quails raised;
- the need to install heating and lighting systems for chicks;
- trays for laid eggs;
- Possibility of cleaning quail cages.
If the master chose wood, plywood and metal mesh as the starting materials, he will need the following in his work:
- hacksaw;
- metal scissors;
- stapler with staples for attaching the mesh;
- self-tapping screws for assembling the frame.
If you assemble a quail cage with your own hands, according to the step-by-step instructions, at the first stage, cut out blanks for the back wall, two parts for the sides and the top of the box. The dimensions of the future structure are calculated according to the table above.
The frame, sawn from wooden blocks, is fastened with self-tapping screws. To make the use of a quail cage safe and long, it is better to clean the wood with sandpaper and impregnate it with an antiseptic that is safe for poultry.
TO further work begin when the impregnation is completely dry. A blank for the front wall is made from a material with a large cell that allows the quail to freely use the fixed feeder and drinker.
The future floor of the bird house is cut out of a fine-mesh mesh. The egg collection tray is a continuation of the sloping floor with an upward curved edge that prevents eggs from rolling off. This must be taken into account when preparing drawings of a quail cage.
Grid to wooden parts The structures are conveniently fastened using large furniture brackets. Below, under the sloping floor, a removable tray is made for collecting litter and litter.
Quail cage made of plastic boxes
An economical and very simple version of a quail cage is based on the use of vegetable packaging boxes made of lattice plastic.
This material is not only easy to process and durable, it is easy to clean and wash, which is extremely important when keeping poultry.
Before moving on to the step-by-step instructions for building a quail cage with your own hands, you need to prepare everything you need for work. The master will need:
- three boxes of equal dimensions;
- flexible strong wire;
- file for working on plastic and metal;
- sharp knife.
The box, which will be in the center of the structure and is intended for, should have a height of about 30 cm, the rest of the boxes may be lower. One of them will serve as a tray, the second - as a ceiling and lid:
- At the first stage, all protruding parts along the upper edge of the main box are cut off.
- Then it is connected to the bottom drawer using the existing grooves and legs.
- The structure is crowned by a second low box.
- The resulting structure is fastened with wire, and if it is not there, other available materials are used: strong twine, double-sided or strong mounting tape.
- On the lid of the resulting quail cage, a future door is marked, convenient for cleaning and removing or adding birds.
- The hatch is cut on three sides, and the fourth is folded outward. For ease of use, a wire loop-lock is attached to the improvised door.
- Several slits are made on the outer wall for feeding the quails in the cage.
- A grooved feeder is attached a little lower, and a drinking bowl is mounted next to it.
How to build a quail cage with your own hands in the video reveals in all details all the tricks of the process and will help you acquire the housing necessary for birds in a matter of hours.
Making a cage for quails - video
Quails are very easy birds to raise and care for; they practically do not get sick, are quite hardy and unpretentious. But here, too, you need to follow certain rules - maintain the temperature in the range of 21-23°C, the daylight hours should be 17 hours, and the cages for quails should correspond to their size and number. Aviaries are bought in specialized stores, but in order to save money, you can make them yourself. Experienced poultry farmers independently develop house drawings based on individual calculations. This is the only way to achieve the maximum optimal conditions for raising poultry.
Things to consider
When making a quail cage with your own hands, you should take into account several requirements that affect the further health and development of the bird. The list includes:
- the absence in the enclosure of material that absorbs moisture and odors that promote the development of bacteria;
- correspondence of the size of the mesh cells to the age of the bird, so that the birds do not fall out and get stuck in the bars;
- compliance with the ratio of the dimensions of the structure to the number of quails to be stocked;
- correspondence of the shape and size of the cell to its purpose.
First of all, you need to select the material. As a rule, mesh is used as the main raw material. But here it is important to decide on the size of the cells, which will be suitable for chicks, grown-up or adult birds, depending on the age of the birds.
The mesh material can consist of galvanized steel or plastic. Most the best option for quails, a structure made of mesh, particle board or plywood is considered.
Dimensions and arrangement
To guess the size of the house, it should be taken into account that for 10 heads when raising a parent herd there should be 16-18 sq.dm. But if the bird is raised for the purpose of producing eggs or meat, then 10-12 sq.dm will be enough.
Standard size in cm for planting quails from the parent flock and for fattening
Drawings of a quail cage include drinking bowls and food containers. For chicks you need to make brooders with 24-hour lighting, it creates additional heating. Such structures are covered on all sides except the front part with sheets of plywood, the floor is covered with mesh material with 1x1 cm cells, and the ceiling is covered with cardboard. As for the front area, it is equipped with a net, and feeders with drinkers are installed inside. The chicks live in brooders until they reach 3 weeks of age.
For young animals as flooring material The same mesh material is used, only with holes 1.5x2.3 cm, for all walls 2.4x2.4. Adults are placed in combined enclosures with closed walls with chipboard or mesh. In this case, it is allowed to use plastic material, this will reduce costs.
If you construct a cage with your own hands for laying quails, then in the drawing with calculations you need to provide a bottom with a slope of 7-9º in relation to the egg collector and drinking bowl. The egg collector can be arranged as an extension of the bottom, but here it is very important not to forget to make a limiter so that the product does not fall out. The mesh cells should have dimensions of 1.6x2.4 cm, but for the side walls the parameters increase to 3.2x4.8 cm.
Cages for meat breeds are made 5-7 cm lower - such quails move very little and slowly, and additional restriction accelerates weight gain.
VIDEO: How to assemble a bird house in 45 minutes
Net houses
With the expectation of 20 individuals, we will consider the features of creation quail cage from the mesh. In this case, you will need to create a frame base with dimensions of 70x35x20 cm. It is to this that the bottom, roof and sides made of mesh material will be fixed. If you plan to use wood beams for the frame, then it is better to give preference to building materials with dimensions of 2.5x5 cm, in the case of metal corners - 2.5x2.5 cm.
A drawing of the simplest cage made of a wooden or metal frame, on the front side and on the floor there is a fine mesh chain-link, where 1 is a wooden or metal frame; 2 - drinking bowl; 3 - door; 4 - feeder; 5 — groove for receiving eggs; 6 - floor covering; 7 — tray for litter
The grid is used with the following cell sizes:
- for the bottom - more than 1.6x2.4;
- roofs and walls - 3.2x4.8.
With these parameters, the bird will not get stuck in the cells and will be able to safely stick its head through the mesh into the feeders.
Step-by-step instructions and photos on how to make a quail cage with your own hands:
- Need to prepare 4 metal corner or wood blocks with dimensions of 500 mm, 300 mm and three units of 700 mm. Wooden parts are fixed with self-tapping screws, metal corners are welded or bolted.
- Cut the mesh with dimensions corresponding to the dimensional parameters of the walls. Secure the sections with a construction stapler from the outside. If the frame was made of metal corners, the mesh is secured with wire.
- When making a sparrowhawk with your own hands for laying hens, you need to take into account the angle of inclination flooring 7-9º, as well as an egg collector with sides and a length of up to 100 mm. In order for the eggs to freely fall into the collection, you need to leave a gap of 30 mm in the lower part of the front wall.
- A hole is made in the middle of the front side to install the door. rectangular shape. The dimensional parameters of the passage will be such that the poultry farmer can easily touch any area of the cage with his hand.
- To collect litter, you need to build a tray from metal sheets or buy a ready-made plastic one. This material can be cleaned and does not absorb odors.
Ready enclosure
After fastening, the wooden frame is cleaned with fine sandpaper and impregnated with an antiseptic that is safe for birds. You can release the birds only after 5-7 days, when the impregnation has completely dried and the smell has disappeared.
Frameless cage made of mesh
A frameless enclosure is considered a more simplified option. The dimensions of the quail cage may be identical to the previous drawing.
In this case, a piece of mesh is bent in two places, the side parts are secured with wire or clamps. Here you need to use material with large cells.
Collection of eggs design characteristics considered a continuation of the floor covering with a slope of 7-9º. As facing material A fine-mesh mesh is used for the bottom. Doors and tray are made of plastic or metal.
Plywood house
You can make wooden enclosures with your own hands using a free drawing provided on the Internet. Such cages are used for a small number of birds kept on summer cottage or in apartment conditions. The structure is assembled both on the basis of a frame and without it.
Plywood house
- Side parts with dimensions of 35x20 cm are cut out of sheets of plywood or wood chip material, the roof is 70x35 cm and the end covering is 70x20 cm. Small holes are cut out in the side walls; they will act as a light source and ventilation system. The diameter should be 3 cm.
- Before fixing, each element used is treated with an antiseptic and coated with water-based varnish.
- The parts are fastened with self-tapping screws or wood corners. You can also additionally use an adhesive composition.
- Take a piece of mesh with cell dimensions of 1.6x2.4 cm and overall dimensions of 70x35 cm. It is fixed to the box with furniture staples. Here it is important to take into account the angle of inclination for collecting eggs, which is 7-9º.
- Canopies are attached to the front wall and a mesh door is already installed on them.
Plastic aviary
Modern farmers use plastic enclosures as cages for quails. They differ in long service life, an increased level of hygiene due to the lack of ability to absorb odors and the possibility of regular monitoring.
To build such a cell you will need three plastic boxes for vegetables, 2 of them should have a low height, one should have a standard height, but not less than 170 mm.
All drawers in the upper area have their corners cut off. The large one is placed on top of one of the small ones, which will act as a pallet. The second one is placed upside down on top of the large one. This is the roof.
Here it is very important to select parts that match the dimensional parameters. Everything is fixed with wire. The door is cut out on the top drawer, but one of the four sides remains uncut. The slits are enlarged on the front side; they will serve as openings through which the birds will reach the feeder.
VIDEO: Quail cage for 50 heads
