≡× MENU

• Interior
• Windows
• Walls
• Projects
• Buildings

How to install (hang, secure) horizontal blinds with your own hands. Installing blinds on windows How to assemble horizontal blinds instructions

Just 10-20 years ago there was no choice of window coverings - only massive curtains and curtains were hung on the windows. Progress does not stand still, and in recent years new species appear window curtains. The most popular now are blinds. In apartments you can often see a combination of blinds + Roman blinds and blinds + curtain. This method of curtaining protects the home from the sun, street noise and can decorate the window. Increasingly, instead of heavy curtains and blinds, compact roller blinds and blinds are used in everyday life. They fit much better with metal-plastic window frames. They are used in both offices and residential premises.

Types of blinds

Designers bring to life a variety of solutions that have no analogues. There are the following types blinds:

• plastic;
• wooden;
• fabric.

Installing blinds on a plastic window is a job that requires preparation. The installation process will depend on the type and shape of this product. Note that blinds are classified according to their shape:

1. Horizontal.
2. Vertical.
3. Rolled.

Horizontal ones are most suitable for living spaces. They do not take up space under the windows and can be mounted both inside and outside the sash. Can be combined with curtains different sizes and styles.

Vertical blinds look better in office premises. Their peculiarity is that they can be attached directly to the ceiling. They can visually increase the space and are suitable for rooms with low ceilings.

Roller blinds have a wide palette of colors and can decorate any room. Made from fabric, they are easiest to clean from dust and dirt. There are several ways to attach them.

In the CIS, you can most often find blinds made in China, Belarus and Russia in stores. Since the majority of the population has plastic windows, especially in cities, it is necessary to study information on how to install them correctly. Let's consider several options for how to attach them to windows with your own hands so as not to damage the window structures.

Standard installation of blinds on plastic windows

Blinds can be attached in different ways. These could be:

• installation by drilling;
• using double-sided tape;
• using magnets;
• using brackets.

When purchasing, instructions are included on how to hang blinds on plastic windows yourself. Mostly advice is given on how to install them by drilling windows. In this case, the fastening is carried out to the window frame above the double-glazed window. You need to carefully study the instructions and carefully take measurements.

Installation of blinds is carried out in the following ways:

• into the opening of a plastic window;
• onlay;
• for each half of the window separately.

Important! Before purchasing blinds for two window halves, make sure that the lifting mechanism is on the left and right sides. Otherwise, the cords from different halves will interfere with each other.

Installing blinds on windows using drilling is not suitable if you plan to change the type of curtain. After drilling, marks will remain on the window profile, and this will be noticeable. The blinds are attached with screws and at the moment this is the most reliable look fastenings

Let's take a closer look at how to hang horizontal blinds on windows. The process can be divided into the following stages:

1. We retreat 5-6 cm on both sides and mark the location for attaching the blinds. At this stage, you need to measure the distance very accurately, since if there is an error of even a couple of millimeters, your blinds will hang askew and will soon fail.
2. We make holes for the brackets with a screwdriver, paying attention to whether the window sash will open or not. If the window will open, then the hole is made in the upper part of the window sash, if it is blind, then on the outside.
3. After inserting the blinds into the brackets, just snap them into place.
4. On the side of the sash you need to make a hole for the latch.
5. Check how the mechanism works and whether it is comfortable for you.

Vertical blinds are a little easier to install; the following procedures should be followed:

1. We make markings for the brackets, retreating 10 cm from the edge of the cornice.
2. We drill holes and insert dowels into them. After this we fix the brackets.
3. We install the fasteners together with the slats on the cornice.
4. We assemble the runners, fasten them into the canvas, and then attach weights to the bottom of the slats.
5. You can check your work vertical blinds.

The brackets can be glued with double-sided tape if you do not want to spoil the window profile. If after drilling the window there are excess holes left, they can always be removed with acrylic sealant.

If you purchased roller blinds, you can use a different installation method to install them.

Alternative types of installation

It is not necessary to drill into the window to attach the blind base. There are other options for attaching blinds to windows. To install roller blinds you will need the following tools:

• double-sided tape;
• liquid nails;
• scissors;
• ruler or level.

Roller blinds are a smooth canvas that can be rolled up, raised or lowered using special mechanism. Roller blinds do an excellent job of protecting from scorching sun rays, while at the same time decorating the living space. Let's look at how to install roller blinds on plastic windows. This type of curtains is attached separately to each window sash. Roller blinds come in several types, and the mounting method for each type may vary.

The Mini roller system is a classic roller blind on a compact shaft. They can be easily installed on individual plastic window sashes. The fasteners are attached without drilling, and thanks to this the frame remains intact. To prevent the fabric from sagging, the bottom metal strip should be fixed using special magnetic holders. Window casement can be opened in any way.

Roller cassette curtains are roller blinds that are assembled into a cornice that looks like a compact cassette. This type of curtain is suitable for flaps, plastic or aluminum. The most popular curtain options are the Rollite and Uni systems. Models of these designs include strips for double-sided tape. Using these strips, the guides are glued to the window sash.

Cassette blinds are controlled by one chain, with the help of which the height of the curtain is adjusted. On window frame a special clamp is installed that keeps the chain from sagging when the window is ventilated.

Isotra and Isolite systems are also popular. A plastic window with this type of blinds can be used in any mode without fear of breaking the system. Fastening is carried out using glazing beads, in which small holes will need to be made. If such glazing beads become damaged, they can be easily and quickly replaced at any time.

Interestingly, the method of attaching blinds to the wall is still used. This type of installation does not harm the plastic window; you just need to take the correct measurements.

Marking before installation

In the question of how to hang blinds on plastic windows, one of the main points is the correct measurements of the window and the design of the blinds. You need to take measurements before going to the store. The main thing is to comply optimal distance along the edges of the markings, armed with a ruler and pencil. It’s even better to mark it on the window itself with a pencil using a level; in this case, you don’t need to rely on your personal feelings and measure by eye. The fasteners must be marked symmetrically on all sides. When installed inside a window opening, our design should not reach 3 cm. When installed on top of the window, it should protrude no more than 5 cm at the edges. The height should be 3-4 cm higher. It is necessary to ensure that the blinds do not extend beyond the boundaries of the glass.

It happens that the fastening plates do not fit tightly to the window profile. In this case, special shims are used, which, depending on the gap, are used in different quantities– from one to four pieces.

It is necessary to measure the height and width of the window along the light opening to the edge of the sealing rubber bands. Then measure the depth of the bead from the glass to the outer surface of the profile. It is necessary to take into account the availability window fittings, so that it does not interfere with the operation of the blinds. If you take incorrect measurements, unnecessary sunlight will shine through the cracks in the blinds.

For fastening horizontal blinds made of plastic, the Holis and Magnum system is used.

Before installing blinds, you need to prepare window openings. They must be smooth and clean. Ideally, they need to be degreased.

Remember when the slightest mistake When measuring and installing fasteners, there is a high risk of damaging both the windows and the structures themselves. Installing blinds with your own hands should be treated with greater care and attention, as this is a very painstaking job.

How to choose blinds

When choosing blinds for your apartment, you need to carefully select the material, color and texture in order to harmoniously fit this type of curtain into the living space. If you have a glazed balcony, then plastic or aluminum blinds will be the only right solution for balcony windows.

An important advantage of blinds is their compactness, heat and sound insulation. When using this type of curtain, your window sill is freed up. You can save a lot on energy consumption, since blinds protect your living space from excess sunlight and warmth. In summer, the air conditioner will operate in a more economical mode. Now you can purchase structures not only from plastic and aluminum, but from bamboo and wood.

Vertical blinds are often treated with special dust-repellent solutions. This design can be rolled up and washed in washing machine or with your hands.

Enough interesting view for interior decoration for pleated curtains. Pleated blinds are made from pleated fabric and are attached directly to the window. These curtains are closed using a cord.

The most refined and expensive look wooden blinds. Wooden plates do not rattle, have a natural structure, protect the room from light and do not heat up. They ennoble the room and fit into any interior, suitable for both offices and bedrooms. They are made from Canadian linden and balsa wood varieties.

You can also choose multi-textured blinds - a combination of plastic and fabric. Vertical plastic blinds they are made curly, because of this the entire room is filled with various reflections of light. They look like curtains made of airy fabrics.

A new product on the market is photo blinds. Any design can be applied to the white slats, and when the blinds are opened you can admire the beautiful picture.

Japanese curtains are a combination of several fabric panels made of fabric or plastic. They move along the cornice with different guides and can move and slide apart.

You can always change the look of your windows by buying new blinds - and you have a new room without renovation. Carefully choose the color of curtains, paying attention to the colors of the furniture in the room.

Residential buildings and restaurants. The products are designed to preserve the intimacy of the environment and protect from sunlight. In order for them to look harmonious in the window opening, they must be installed correctly. You can watch how various blinds are attached to plastic windows in the corresponding video or read the instructions. Depending on the shape of the product, the types of fasteners will differ. Next, we will talk about the main installation methods.

Blind installation options

The installation method is influenced by various factors, but the main role is played by the presence of a flat surface. If the walls are curved, they must be leveled to avoid complications during installation. The following options exist:

• Ceiling mount;
• Installation on walls;
• Placement inside a window opening;
• Installation of blinds to each double-glazed window.

When choosing a method, you should focus on the design. The sequence of the work itself will differ little.

There are several options for attaching blinds to a window opening, both with and without drilling

Installation stages

The versatility of blinds implies a similar procedure for different mounting methods. The differences will only be in the details.

1. First of all, it is necessary to measure the window opening. If the owner decides to secure the products in a third way (in the window opening), then a couple of cm will need to be subtracted from the received data. This will avoid the awkward situation when the blinds drag along the window sill. If the user decides to install it with an overlap, then, on the contrary, an extra cm will be required. To reliably close the window, 4-5 cm on the wide side will be enough. The length can even be up to the floor. Here you need to focus on own feeling taste. If the owner chooses the 4th installation method, then measurements of each sash will be required. If curvature is detected, it is recommended to adjust the measurements as for the correct figure.
2. Marking. This refers to the marking of fasteners, which must be located symmetrically and accurately. Geometry is important, since the reliability of the blind design itself will depend on it. Already during marking, it is necessary to check the possibility of opening and closing the window. The product should not interfere with the owner’s ability to ventilate the room. It is also important to determine the location for the cord, since this is where the point of greatest pressure will be. In particular, it is recommended to provide additional fastening.
3. Installation. Self-tapping screws are installed directly into walls or ceilings. After they are screwed, a curtain rod is hung on them to secure the blinds. Then you can test the product itself.

Blinds diagram

Nuances of installation depending on the type of plastic products

In order not to damage plastic windows when installing blinds, it is necessary to carry out the work extremely carefully. Let's consider the subtleties of installation for different types of products:

• Vertical blinds. This type is in greatest demand because it allows the designer to experiment with color and shape. The range of blinds is extremely wide. For installation, not much is required: a cornice, blind slats, a chain with runners. The latter must be of sufficient length so as not to limit the operation of the device itself. This is especially true if the window is different non-standard form.

The products can be mounted on a ceiling or wall mount. In the first case, you should focus on the width of the lamella in order to determine the area where the cornice will be placed, that is, the distance from the wall. Mounting to the wall implies the possibility of placing the cornice both under the ceiling and above the window itself. After installing the brackets, runners for hanging slats are installed on the mounted cornice.

Various options for installing blinds on a window

Since vertical products do not function without weights, they will need to be hung on both sides of the blind somewhere below.

• Horizontal blinds. Often these products are installed in the second or fourth way. Installation on the wall is required when the owner wants to completely close the window opening. And installation on each sash allows you to maintain functionality plastic double glazing. Installation work imply going through the same stages as in the case of vertical products.

Installation of blinds with and without drilling

There are two main options for attaching the cornice. The first method involves the use of self-tapping screws, and the second - L-shaped fasteners.

Self-tapping screws allow the owner to install horizontal products directly onto the window profile.

Attention! The latter will not experience significant damage, since the holes can always be sealed with white sealant.

Before drilling, markings are made. To do this, install the blinds in the cornice and open them completely, after which they bring them to the window. A visual assessment should make it clear how accurately all measurements were taken, since then it will be necessary to transfer the markings of the brackets to the profile. There should be no distortions.

Properly attached blinds will decorate the room and serve the owner for a long time

After the drilling operation, the following actions are performed:

1. The cornice is screwed using brackets;
2. The fastenings are closed;
3. A hook with a cane and a tip is installed in the control unit;
4. The bell is secured with a knot;
5. Then, using a cord, the product is lowered to the end to fix the blinds at the bottom.

L-shaped brackets are attached without drilling, which will need to be purchased separately. The simple snap-on method greatly simplifies the maintenance of windows and blinds. These brackets cling to the top of each sash, unless it is blind. This type fastening is considered the most suitable for installing the product inside a window opening. The use of the same adhesive tape does not guarantee the same degree of reliability that special brackets can provide. At the same time, they maintain integrity window profile, which is important.

Following these recommendations, the user can install blinds on plastic windows independently. Depending on the shape of the product and the characteristics of the window, it will be necessary to choose the optimal mounting method. He considers the method without drilling to be the best.

Video: How to attach blinds to plastic windows

Photo: How to attach blinds to plastic windows

Installing blinds on windows is not such a complicated process; you can do it yourself. There are different mounting methods for different types of curtains and each of them has its own installation nuances.

Mounting methods

There are three types of fastening blinds: to the wall, to the ceiling, directly to the frame, and two ways - with and without drilling. The universal basis of any fastening is the cornice, which is attached to the wall, frame or ceiling in different ways.

With drilling

Fastening is carried out using self-tapping screws and brackets on which the cornice and fishing line are installed. Additionally, you will need a pencil, ruler, drill, and screwdriver.

First you need to make markings in the places where the brackets will be located. For reliability and accuracy, it is necessary to drill holes for the clamps in the marked places. Then, applying the brackets one by one to the PVC frame, use a screwdriver to secure them to the markings. Next, the cornice is installed and the entire structure is assembled.

No drilling

If you plan to replace blinds or other window decoration options in the future, it is not recommended to damage plastic windows. The holes from the screws will remain in the frame forever and will significantly spoil the appearance of the windows. In this case, it is easier to turn to a method that does not require drilling.

In this case, the brackets are attached in two ways:

• for top part PVC profiles on opening sashes(you can simply hang it like a hook);
• with double-sided tape, which can be glued without fear of leaving marks.

Mounting blinds on the balcony requires a special approach. Important role The balcony design comes into play here. The type of glazing determines the possibility of choosing certain blinds and the method of their fastening.

In general, almost all options are available for balconies. Particular attention should be paid to the type of blinds, since not all of them are universal for different types of windows.

For example, horizontal blinds are not suitable for a balcony with sliding windows, as they can become deformed during use or from strong winds.

The nuances of installing different types of blinds

Horizontal

The light-protective design, which has become familiar and almost classic for window decoration, horizontal arrangement slats. Advantages:

• Compactness. Installed directly on the window, leaving the window sill free. This saves space and allows you to place greenery on the window in favorable conditions.
• Light weight structure.
• Strength and rigidity of the lamellas, preventing deformation.
• Fire safety.

• Simple control mechanism.
• Special coating or impregnation against dust, dirt, odors and grease.
• Resistance to humidity and temperature changes.
• Various materials for making lamellas: wood, plastic, aluminum, less often fabric.
• Easy installation.
• Affordable price.

Some disadvantages are worth mentioning:

• When mounted on a frame, the angle of inclination is limited window sashes when opening.
• The slats produce a characteristic knocking or ringing sound when the wind blows. To avoid this, you need to purchase lower fasteners, which are not included in the kit and quickly become unusable.
• The structure is subject to repair in case of severe deformation of several lamellas, but it will cost the same as new blinds.
• Not suitable for balconies and loggias with sliding windows.

Vertical

Blinds, as the name already implies, are a simple and convenient light-protective structure consisting of longitudinal vertical plates.

They are distinguished from horizontal ones by:

• More aesthetic appearance. Horizontal blinds are more likely to be functional, while vertical blinds are decorative.
• Possibility to cover large area one cornice. Horizontal blinds, as a rule, consist of narrow slats and are intended for minimalistic decor large windows. Vertical models have different widths and easily cover the area of ​​large windows, arches and doorways.
• Variety of materials. Can be made from wood fibers, wood, aluminum, bamboo, plastic, woven and non-woven fabric, mirror, blackout, thread. The abundance of materials provides another advantage - variability of colors and textures.
• Modern and original design windows, opening up more design possibilities.

• Simplicity of control mechanisms. Both mechanical and electrical are possible.
• Possibility to place photo printing on curtains due to the larger surface and best characteristics material.
• Practicality. Larger slats are easier to wipe when necessary, which occurs infrequently. If, in the event of severe contamination, for example, in a children's room, the slats still need to be subjected to hygienic procedures, this will not take much time - they can be washed by hand and in a washing machine.
• Possibility of installation on non-standard windows(triangle, trapezoid, arch, bay window).
• The structure is subject to repair. To replace this or that part, you do not need to call a specialist; the repair is simple enough to do it yourself. You can replace the lamellas one at a time without dismantling the entire structure.

Rolled

Roller blinds and roller blinds are solid fabrics, often made of textiles, but other materials are also possible, which roll up like horizontal blinds.

The height can be adjusted by fixing the curtain with a weighting agent on the bottom strip of the canvas.

There are different types roller shutters: with an open drum (for fastening directly to the window) and with a decorative cornice; “mini” for installation on each frame separately and “roll-cassette” for covering the entire window.

There is an opinion that roller blinds are the most budget-friendly and practical option window decoration, but this is not entirely true.

Of course, roller shutters have their advantages: a variety of natural and synthetic fabrics, colors and patterns, ease of care (allowed wet cleaning) and operation, the ability to fix the curtain at the desired height, special impregnations against dust, moisture, high temperatures and glare, compatibility with other types of curtains.

Roller blinds are convenient if you need to hide a room from the sun, or decorate a window with beautiful tulle so that from the street you cannot see what is happening inside.

But with so many advantages, curtains also have significant disadvantages:

• The budget price is a misconception. Yes, a medium-sized curtain itself made from a common material will be inexpensive, but it will look boring. In order for the window design to be complete, it is necessary to consider additional decor, and this increases the cost several times.
• Roller blinds in the bedroom, office and rooms with high windows need electrical control. Electric drive designs are expensive, and some manufacturers also produce noise.

• It is impossible to make custom-made curtains from certain textiles. You can only choose specific products of a certain brand, since the range of fabrics for the production of roller blinds is very limited: translucent, textured, reflective, perforated, blackout.
• The maximum width of roller blinds is 280-300 cm, that is, to cover a large area with one cornice, for example, panoramic window or the balcony will not work.
• There may be problems with installation not on the wall, but in the window opening, since the bobbin is wider in width than the curtain itself. On the sides window openings There will inevitably be gaps. Ceiling or wall mounting is preferable.

Pleated

This type of blinds is similar to both horizontal and roller blinds. The design consists of a control mechanism (chain or electric drive), weights, and pleated fabric that resembles accordion bellows. The range of materials, colors and textures is very diverse.

Peculiarities:

• They close from top to bottom, like classic canvases, from bottom to top, or from both sides at the same time. In this case, the degree of density of the “accordion” can be adjusted, thus closing either the upper, lower, or central part of the window.
• Suitable for curtains windows of irregular shape.
• Optimal solution for attic, attic, ceiling and inclined windows.
• “Opening”, the canvas compactly gathers into a fold and hides inside the cornice.

• Convenient for installation on all types of windows and double glazed windows.
• Various ways fastenings and control mechanisms (manual and electric).
• The woven fabric is washable.
• The curtain fabric can be made of two types of fabric at the same time, which makes it possible to regulate the degree of transparency, darkness, and sun protection.
• Easy installation you can do it yourself.

Species

• Classic. By appearance They are most similar to horizontal blinds, however, they can also be vertical. Made from fabric, paper or plastic. Designed for room darkening, protection from heating by sunlight, zoning internal space premises.

• Inclined. A type of pleated specifically for windows that are located at an angle in the attic or ceiling. Their peculiarity is in a specific assembly system, which does not allow the canvas of any material to sag when at an angle. Mostly inclined models are produced with electronic control.

• Corrugated. This type is a vertical and horizontal double pleat. As a result, the folds look smoother, neater and denser. Corrugation made of plastic and paper in this design absorbs a significant part of the heat and protects from bright light.

• Arched. The most flexible canvases that take any shape, like a paper fan. Good decision for rooms with non-standard window shapes (arches, trapezoids, triangles, beveled windows).

• "Day-Night". The fabric of such blinds consists of two layers of fabric: light, light-transmitting fabric for daytime use, and thick, dark fabric for protection from the bright sun during the day and prying eyes in the evening.

Cassette

Such systems involve either the use of horizontal slats or a solid fabric, but are not horizontal blinds or roller blinds.

They differ in the types of cassettes (angular, round, flat), controls (various types of mechanical and remote), and the materials used (plastic, textiles, bamboo, aluminum).

Their main feature consists in a design whose special structure makes it possible to fix the blinds at a minimum distance from the window glass. This prevents deformation, sagging, wrinkles and unevenness, and completely opens the window sill.

Advantages:

• Compactness. Cassette blinds take up minimal space, leaving owners the opportunity to use their imagination and organize additional window decoration or leave the window sill as a functional surface.
• Simple and clear type of control.
• Long service life. Special impregnation protects the canvas from dust, grease, dirt, moisture, and abrasion.
• Ease of hygiene procedures. Cassette systems do not require special care. It is enough to wipe their small surface area with a damp sponge and soapy water once every few months.

• A variety of designs for interiors in any style.
• The tight fit of the canvas to the surface of the glass protects equally well from heat and cold.
• Possibility to install the system yourself.
• A variety of materials - from light window decoration to total blackout protection.
• Possibility to combine blinds with curtains, tulle, lambrequin.

Measurements and tools

The final result depends on how correctly the measurements are taken. Even expensive ones beautiful models will not look good on the window if there are gaps in the opening or the edges of the slats constantly ride up against the wall.

It is important to pay attention to the following points:

• For the most accurate indicators A steel tape measure and metal screws are used.
• The resulting numbers cannot be rounded., accuracy must be maintained down to millimeters.
• When ordering blinds The width parameter is indicated first, the length parameter – second.
• Not a single standard window opening has absolutely ideal geometric shapes, therefore measurements in height and width must be made at least at two points.

Horizontal

If you plan to attach blinds to the movable half of the window, you will need to measure the gap between the glazing beads and add at least 30 mm, which will prevent gaps from appearing in the structure. The height of the blinds is equal to the height of the window sash. For installation inside a window opening, measurements are required at three points in height and width, since openings are not always absolutely proportional.

The width is identical to the wide side of the glass plus the thickness of the rubber seal. The length is identical to the height of the window (including elastic bands) with a margin of 1 cm. To install the cornice, an additional 30-40 cm will be required to the slopes and hinges. The control chain is 2/3 of the window height. When choosing to fix the cornice on the wall, the width parameter increases by 10 cm, the height is measured from the point of attachment of the brackets to the floor at random.

Vertical

When installing in a window opening, you need to determine the width at the top of the arch and subtract 20 mm. To determine the height, compare the height of the left and right side arches, subtract 1cm from the smaller value. For wall mounting, you need to add at least 10 cm to the wide side of the slope. The length of the slats can be any, but it is recommended to retreat 2 cm from the edge of the blinds to the floor. Ceiling installation implies determining the height (to the floor or window sill) minus 2 cm, it is recommended to increase the width of the arch by 100+ mm.

Rolled

To install canvases to the wall, only one measurement is required - from the edge of the window sill to the markings for the brackets, and the width can be up to 300 cm. In the window arch, roller blinds are installed after measuring the width, from which you need to subtract 4 centimeters, and the length of the canvas is equal to the height of the window minus 15 mm.

Pleated curtains similarly do not require a professional approach to taking measurements and installation.

How to hang it on the wall yourself?

Installation work on window decoration requires certain skills and experience, but if you want to try it yourself, you need to take into account some of the nuances and features of this work. Installation of blinds begins long before preparation work surface and a set of tools.

The first step of this process is an informed decision about the type and variety of blinds, material, color and texture, depending on the functionality of the room.

Thus, it is more advisable to choose vertical blinds for the living room that let in light, for the bedroom - automatic electric roller blinds made of blackout fabric, and for the kitchen, where cooking smells and food combustion products are constantly in the air - plastic blinds that do not absorb grease and dirt.

Second important point- this is the correct marking. A lot depends on it, including how easy the installation process will be.

If all the architectural features of window openings are taken into account by specialists when ordering blinds from them, everything will go easily and smoothly without the help of professional installers. It is also important to consider whether it will be possible to open the window after installation, how the light protection devices will work, and whether there is a risk of their deformation.

The installation of blinds must be carried out exactly with the markings and subsequent verification of the functionality of the structure. The most important point here is the choice between fastening - with or without drilling. It is also necessary to provide for the type of control.

For low windows great solution is one of the varieties mechanical control. Magnetic, automatic (electric) control with an electric drive is suitable for roof and inclined windows, windows in the bedroom.

Ceiling installation instructions

• First of all, you need to mount the blinds, assemble the brackets and install them on the reel. Then this structure must be fixed to the ceiling in order to mark for fastening.

• The second step is to attach the brackets with adhesive tape at the top of the frame and the string tensioner at the bottom. It is not necessary to pre-attach them with tape, but it is advisable to eliminate problems with subsequent drilling of holes for screws. After installing the guide string, the curtain itself is mounted into the mechanisms.

What is the best way to install automatic electric window blinds?

Automatic blinds are the most convenient way window decoration for independent execution.

They are attached in three ways: to the ceiling, to the frame with drilling, to the frame without drilling. In all cases, the fastener is a cornice with decorative facade or without it.

The brackets on which the structure is supported are fastened with self-tapping screws, hung or glued with double-sided tape.

The special tape, despite its apparent impracticality, is fixed very firmly, so it is important to correctly apply the markings for installing the brackets. Once they are glued, moving them will be very problematic.

Installation procedure:

• Preparing tools. You will need a stepladder, a set of screws from the kit, building level and drawing supplies, drill, screwdriver.
• Applying pencil markings for installing brackets. To securely fix the fasteners, it is recommended to drill holes for self-tapping screws at the same stage.
• Attaching the brackets in a suitable way(with or without drilling).
• Installation of cornice.
• Installation of slats. To do this, you need to pull the control cord on which the fastenings for the slats are located so that they are in the desired position. Then fix all the slats on the hooks of the fasteners.

How to attach cassette tapes yourself?

You can also install cassette blinds yourself. Before installation, you must read the instructions to make sure fully equipped, prepare everything necessary tools: screwdriver, drawing tools, screwdriver, drill, cotton pads or small piece of cloth, degreaser.

When everything you need has been collected, you can proceed to the first stage - degreasing the glazing beads. Then you need to remove the side covers of the box, lift it to the top of the frame, focusing on the guide protrusions, drill holes for fastenings, and secure with screws.

You can use a screwdriver for this purpose, or you can perform the process manually using a Phillips screwdriver.

Once the box is installed, you need to secure the covers to the sides. After this, you can glue the guide strips to the degreased frame. The guides should be several centimeters below the angle of the bead.

We hang aluminum curtains and blinds on sliding windows

For installation you will need a set of tools: wire, drill, Phillips screwdriver, screwdriver, drawing supplies.

Instructions for installing blinds on sliding windows contains a list of items that is carried out step by step:

• Draw marking line for installation of brackets. It must take into account the distance between the clamps and the control mechanism, between the brackets (from 60 cm) and to the extreme areas on the blinds (25 cm). For large blinds and significant weight, it is recommended to use intermediate fasteners.
• Drill holes for installing dowels on the surface to which you plan to attach the brackets. It is possible to use blinds on plastic windows without drilling.
• Installation profile.
• Fixing the top rod of the blinds on the brackets. It is important to remember that the blinds at this stage are already assembled.

Working with aluminum options on inclined surfaces requires a little more effort and skill.

How to secure the bottom?

The simplest and affordable way for DIY installation - this is a fastening without drilling based on double-sided adhesive tape. Suitable for tilt-and-turn mechanisms on windows.

Performed step by step:

• Degreasing of frame areas and fasteners, which will be connected with adhesive tape.
• Marking fastening roller shutters.
• Installation. The chain mechanism can be installed on any convenient side.
• Assembly brackets.
• Marking for fastening brackets. To do this you need to install them on the assembled roller blind, install on the window without fastening, mark with a pencil the places for the adhesive tape, remove the curtain.
• Applying adhesive tape on the back surface of the brackets, mounting on a window.
• Installing the guide string against sagging. It is attached to the “ear” of the top bracket and the weighting of the curtain, and at the bottom it is fixed in the tensioner, which is installed on the frame.

This video shows how to hang horizontal blinds with your own hands.

Ten years ago, blinds were considered exclusively an office window decoration item. But recently the lamellas have changed, new design options have appeared. Designers began to use bamboo, linden logs, cherry wood and fabrics as production materials. It has become fashionable to select models for furnishing houses, apartments and public spaces. When you turn to a salon or specialized store for help, you will receive competent advice from a sales consultant on installation, care and selection. If you are going to install blinds on your windows yourself, read our article in detail.

You need to know this in advance before installation!

To ensure that the blinds last a long time, try to install them carefully. If you understand the details in advance, the installation process will not take much time. The main thing is to take into account the models, installation method and take this into account during assembly. If you attach window blinds you will be directly against the wall, you need to make sure that its surface is perfectly flat.

Important point! When purchasing, be sure to check with your consultant whether all parts of the mounting set are included in the kit. There are situations when purchasing additional mounts is inevitable. It's better to take care of this in advance.

Blinds can be attached in one of four ways:

• to the ceiling;
• to the wall;
• inside the window opening;
• for each window division.

It doesn't matter which option you choose. It all depends on the individual preferences of the client. Installed on double glazed windows various forms. But the method of fastening is selected individually. The sequence of steps is approximately the same, but there are some distinctive details.

Universal step-by-step steps for installing blinds

1. Many are sure that models sell standard size and neglect preliminary window measurements . We would like to warn you: take the time to measure the height and width of the window opening.
2. Be sure to note that the length of the slats should be two centimeters shorter than the length of the window. If you envisage the option of attaching the structure to the wall, then the canvas should cover the window fifteen centimeters on the right and left.
3. Next, mark the fasteners. Make sure that there are no difficulties with the operation of the mechanisms and that they will easily allow you to open the window.
4. Using the markings as a guide, attach necessary details to the base. Dowels and screws are screwed into the wall or ceiling. Sometimes directly into the glass unit. Next, a cornice is hung on them, which holds the structure.
5. As soon as you finish installing the blinds, check their mechanism.

Installation of blinds on plastic windows

Installation of blinds on plastic windows is a common occurrence. Most modern double-glazed windows are made of plastic. This is a fragile material, so you need to work with it carefully. Now we will look at installation options where drilling is used:

We install vertical blinds on plastic windows

This is one of the common types. Functional Features, wide color palette, ease of care and color combination attracts buyers. That's why it's common in offices and public organizations. Installing vertical blinds will not take much time.

1. It is necessary to make markings for fastening the elements.
2. Next, attach the brackets and cornice.
3. Place runners on the cornice and attach lamellas to them one by one.
4. Attach weights to the control handle.
5. Check the operation of the structure.

Vertical blinds mounting diagram
For detailed instructions on installing vertical blinds, watch the video below:

We install horizontal blinds on plastic windows

In most cases, horizontal slats are attached to the wall. They are able to close the window opening completely, but at the same time they look aesthetically pleasing and do not “squeeze” the space of the room. There are times when they are mounted to a window. Here, the lamella parts are attached to each sash separately. The installation system for horizontal blinds is no different from vertical options:

1. We mark the places for fastening.
2. We attach the brackets.
3. We put a cornice on the brackets.
4. Checking the length.
5. We check the installation and operation of the mechanism.

Mounting diagram

To make sure the steps are correct, watch the instruction video for installing horizontal models.

We install blinds on plastic windows without drilling

If for some reason you do not want to drill a wall or a double-glazed window, you can use tape or special brackets. There are L-shaped brackets that are attached to the surface of the glass unit without drilling. They are easy to install and dismantle thanks to a simple latch. But, they are attached only to those doors that open. To attach the brackets to a closed sash without drilling, use double-sided mounting tape.

Thus, with the help of L-shaped brackets and tape, you can maintain the integrity of the window profile. Fastening with adhesive tape is less reliable than others, but if you do not overload the structure, it will last a long time.

Mounting on brackets

We install roller blinds on plastic windows

Roll models are installed in almost the same way as vertical ones. One of the most available options installation of blinds - on two brackets, which are secured using self-tapping screws.

1. We make markings for the details.
2. We fasten the brackets with self-tapping screws (make sure that they are at the same level, otherwise the blinds will hang crookedly).
3. Next, we attach the cornice with the canvas.
4. We check the operation of the structure.

Mounting diagram for roller blinds
For more details on the nuances of installing roll models, watch this video:

Installation of blinds on wooden windows

Modern models are attached to wooden Euro-windows and old Soviet ones. It’s worth noting right away that when installing on old-style windows, you need to carefully take measurements.

Please note: the glazing bead on wooden Soviet windows should not protrude beyond the plane of the frame!

Among suitable models For wooden windows: isolight, isotra, roll and rollite. These are universal models. They fit harmoniously into the interior design, regardless of its style. Are different simple mechanism management and high performance.

One of the most complex installations on wooden double glazed windows– fastening to each section. All the necessary parts are included in the headset. Installation principles are the same as for plastic ones: using brackets or screws. If you are not afraid to make a hole in the glass unit, you will be pleased with the result. With the help of fastening with screws, the structure will last a long period of use.

Mounting to brackets is considered less reliable, but it has a huge advantage - no holes in the glass unit. When you want to remove the blinds, there will be no defects left on the window.

We install blinds on wooden windows

Let's take a closer look at the option using drilling and fastening with screws.

1. First you need to make markings for each of the fastening elements.
2. Make sure that the structure does not interfere with the opening of the window sashes.
3. Make holes for the screws. Install screws and dowels.
4. Attach the curtain rod to them.
5. Install another fastener at the regulating thread to relieve the structure from accumulating load on that area.
6. Attach the runners and slats to the cornice.
7. Check the operation of the structure.

Self-tapping screws make it easier to attach the cornice to the window. Self-tapping screws will not cause any harm to the window profile, but work carefully during installation. If you want to remove the slats after a while, no problem. After dismantling the structure, the holes are filled with special silicone glue white– and not a single trace of the screws will remain.

Good to know! To begin with, it is better to drill holes according to the markings, and then mount the parts. Screwing in self-tapping screws individually is one of the causes of cracks. And this installation method guarantees the integrity of the plastic.

When the holes are prepared, the brackets are carefully screwed to them. Then the cornice is installed and closed. The following steps are required:

1. Install the hook in the control mechanism.
2. Install the cane.
3. Attach the tip to the cane.
4. Secure the thread with a knot.
5. Check the operation of the blinds.

Installing the lamella structure is not difficult if you follow all the requirements and work carefully. Also read the installation instructions, which are included with any model.

If you decide to install blinds yourself, then you should be prepared for the fact that this is quite a difficult job.

For plastic windows There is a special type of horizontal blinds of the cassette system - Isolite.

The installation guide will help you install horizontal blinds (not to be confused with the concept of vertical).

The first thing to do is to choose the option of installing horizontal blinds, that is, choose the side on which the control mechanism will be located (this rule also applies to vertical ones).

Window measurement scheme

Then the next step: measurements are taken of the window openings on which the blinds will be installed, taking into account the shape of the window openings. It is recommended to take measurements in the middle of the opening being measured and along the edges. This will compensate for possible non-straightness of the walls of the room. It is recommended to take measurements with a metal tape measure. The resulting values ​​should not be rounded.

When measuring window openings, pay attention to whether there are door or window handles nearby, heating devices. Since they can become an obstacle to the installation and rotation of the slats.

Blinds should hang freely and easily rotate around their axis. It is recommended that they do not touch the windowsill or other obstacles.

Bracket mounting diagram

To match the width of the horizontal openings, add 20 - 40 mm to the width of the openings. To match the height, about 50 - 70 mm is added to the height of the window opening. This will take into account that the side slopes of the windows may not be completely vertical.

The next step is to purchase the product strictly according to the measured dimensions.

Once you have purchased your blinds, open the package and find all the parts needed for installation. Namely:

• screws;
• two metal brackets;
• horizontal blinds.

List of tools

• screwdriver or Phillips screwdriver;
• pencil or marker;
• self-tapping screws with dowels measuring 6-8 mm;
• drill for concrete - 6-8 mm;
• battery or electric drill.

Installation instructions

Blinds installation diagram

1. To mark the attachment points, mark these places at a distance of about 60 cm from each other, and about 20 cm from the edges of the top strip. Having made the markings, keep in mind that the bracket should not come into contact with the caliper, clamp or control mechanism.
2. Attach the brackets to the ceiling, wall or window sash. If you are attaching the product to the ceiling or wall, then attach both brackets (they are marked: left - LH/GH, right - RH/DH) to the top of the opening, retreating about 20-30 mm , mark two screw holes with a pencil. Drill holes 30-40 mm deep with a drill.
3. Secure the brackets with self-tapping screws to the top of the window slope.
4. Insert the profile into the left and right brackets. Fastening to the PVC window frame with hinged brackets can be done without drilling the window profile. Special brackets for plastic windows are used here.
5. Turn the bracket latches counterclockwise until they stop.
6. Insert the upper cornice into the brackets and turn the latches clockwise until they stop.

Assembly

Horizontal blinds must be assembled strictly according to the diagram. The slats should be placed along the rope ladder strictly at the same distance from each other. Using runners, attach the slats to the cornice. At the bottom, the slats are connected by a chain. Through lifting mechanism There is a control cord running inside the cornice that connects the slats to each other. Important! Make sure that the runners move effortlessly in the cornice. The cord and rope should also move freely.

Installation is complete. Be sure to check the quality of functioning of your blinds!