• Interior
• Window
• Walls
• Projects
• The buildings

Detailed instructions for assembling beds with a lifting mechanism, video tips from professionals. Detailed instructions for assembling a double bed, common mistakes Disassemble a bed with a lifting mechanism

Each of us needs to know the basics of proper disassembly and assembly of a bed in own apartment. You may need to disassemble a child's room or bed for adults unexpectedly. Reasons may include rearranging furniture, moving to new apartment or home, replacement old furniture to a new one.

Design dimensions may vary. This article will tell you how to properly disassemble and reassemble the product.

How to disassemble the bed? When disassembling yourself, you should install the furniture in a horizontal position. If you left the instructions when purchasing, you can use them during disassembly. It will be difficult for one person to disassemble furniture on their own. One of important points is correct selection wrenches.

You should always start dismantling the bed from the base and only then proceed to removing the frame. To access the base from it you need bed linen, a mattress and pillows. To disassemble the base wooden bed You will need a special wrench to remove screws and self-tapping screws.

Frame disassembly

Many beds have reinforcing bars installed on the frame. The screws on them are unscrewed with a screwdriver. At the same time as the slats, the support corner on which the base rested is disconnected.

On the frame you need to unscrew all the screws on metal corners. Next you need to unscrew side walls and backrests. After disassembling them, the remaining small parts and the central panel are removed.

The easiest way to disassemble a bed is in the form of a playpen. The model is bought for a child. Assembling and disassembling the playpen does not take much time.

To quickly disassemble the playpen you will need a wrench and a furniture wrench. required diameter. Initially, you need to disconnect the base with the drawers, after which they are removed side panels and backrests. Next, the fastening of the base under the mattress and the long sides are disconnected.

Every man can disassemble a bed, regardless of the model. One of the main rules when dismantling children's furniture: you absolutely cannot rush. If you rush, you can damage the wood flooring.

It is best to disassemble in accordance with the instructions included with purchase. If problems arise and you cannot disassemble the bed yourself, we recommend that you contact a specialist.

For many people, purchasing furniture is a significant event. Headsets are not purchased every day; you want them to last longer and be comfortable. Most people try to assemble furniture at home on their own, but not everyone knows how to do it correctly. To better understand how to assemble a double bed, the instructions will help, which describe all the nuances, without which this process can become quite problematic.

Before you begin assembly, you need to check that all parts and components of the bed are present. Typically the standard set includes:

• headboard;
• longitudinal side frames (tsars);
• central frame;
• furniture corner (tension);
• a set of screws of the required size;
• additional orthopedic base.

Assembling a double bed is not easy to assemble, this process requires precision as well as attentiveness. You should start working strictly according to the instructions, where the assembly is described step by step and a list is given the right tools and materials. First of all, you need to have self-tapping screws, screws, bolts. The tools you will need are screwdrivers with different tips , screwdriver, wrench

. To assemble new bed models, Euroscrews may be used, which require specific keys. A tape measure will not be superfluous, since you will have to measure parts of the parts and a level to measure the accuracy of the angles.

• Before you start assembling the bed, you should remember the basic principles and requirements:
• It is inconvenient to assemble alone; it is better to do it together;
• the room should not be cramped, you need space to lay out large parts, take measurements and cut out;
• Bolts and screws should not be strongly secured at once; first, all parts must be assembled, and then only the fasteners should be secured;

The assembly instructions need to be kept, sometimes you have to redo something.

Basic Workflows

Assembling a bed of any kind consists of important processes, each of which is described in detail in the instructions.

Base Assembling a double bed begins with installing the base. The base border consists of three frames and a headboard. First of all, you need to connect these drawers together. IN different models

The next stage is to attach the corners and shelves that come with the kit to the top of the drawer. We align everything perpendicular to the surface and only then secure it completely with screws. If the bed has a lifting mechanism, then we attach it at the headboard on the side frames, making the play minimal. After all these preparations, we assemble the base into a single whole and attach the central back to the frames.

Fastening the slats

Frame

The main element in the bed is its frame, which is a metal frame equipped with special slats that will prevent the mattress from sagging in the future, thereby providing the sleeper with spinal support and a comfortable sleep.

Standard model

The standard double bed model includes a base, frame, and headboard. Many people are concerned about the question of how to assemble a double bed - it must be assembled according to the instructions. This is not difficult if you have the necessary components and tools and adhere to a certain installation technology:

• first of all, using corners, we strengthen the side frames at a height of no more than 0.2 meters;
• install the footrests at the same height;
• Let's assemble the ribs - fasten them five centimeters above our side frames;
• fix the central frame. It is very important to take all accurate measurements and secure it in the center using special corners.

At this stage, the assembly of the base is considered complete. Another beam is placed on the frame in the center for the mattress pad. Then assembled structure tighten it completely with self-tapping screws, maintaining a certain distance of 10 cm. This will allow you to achieve optimal rigidity of the product. Wooden parts can be varnished as protective coating and after two days you can sleep comfortably on the bed.

Design diagram of a double bed with cross bars

To assemble the frame, it is necessary to connect all the elements in series. After this, you need to tighten the screws as much as possible. This procedure is best carried out by two people.

With orthopedic base

One of the common types of double bed bases is orthopedic, the main advantage of which is the uniform distribution of the weight of the person sleeping on it, which does not put additional stress on the spine. An orthopedic base is a design special purpose, which consists of a frame and lamellas. It is designed to provide the orthopedic function of the mattress. The base can be attached directly to the bed or be a separate component.

How to assemble a double bed with an orthopedic base? For greater convenience, only the frame itself is assembled immediately, without slats. This will allow you to quickly attach the base to the bed frame in the future. Before starting to assemble the base around the perimeter, everything necessary details arranged in the required order. Using screws of the required diameter, the corners of the tie are fixed to the sides of the frame. Next, connect the side frames, the front of the bed (headboard) and the central frame with bolts, but do not tighten them completely. When all the parts are clearly aligned and connected to each other at a perpendicular angle, you can tighten the fasteners well.

The metal rod is assembled into one product, and the legs are attached to it. Then we insert it into the perimeter of the base and secure it tightly with self-tapping screws. For normal attachment of the lamellas to the frame, we place lamella holders on their ends and secure them in order. special holes on the base of the rod. We check that everything holds well and the orthopedic base is stable.

Bed with orthopedic base

With lifting mechanism

Instructions on how to assemble a double bed with lifting mechanism slightly different from the standard model assembly instructions. This is due to the complexity of the mechanism itself. But if you have at least a little experience in assembling and following the advice of a specialist, assembling such a mechanism will not be a problem.

The main difference from assembling a frame with an orthopedic base is that special wedge-shaped joints are used to connect the parts.

To achieve the result you need to insert necessary details into each other and press down firmly until it stops. With the help of such connections, the parts will hold tightly.

According to assembly instructions sleeping place With such a mechanism, you need to connect all the parts with screws according to the sequence, and then tighten them well. The bed frame is attached to the body only by the lower part of the lifting mechanism, which is already attached to it. Due to the bulkiness of the design, it is better to do the assembly together; it will be extremely inconvenient for one person.

Then the slats are installed. You should start from the front of the bed. We insert the part into the special slot, bending it slightly. After a characteristic click, the lamella is securely fixed in the bar. We also insert all the remaining parts.

Headboard

An element of the bed, such as a headboard, can be a continuation of the bed or a separate part of it. It can be soft, upholstered with foam rubber, batting, or hard, in the form of shelves that will perform the necessary functions. After purchasing a bed, you can remake or improve your existing headboard with your own hands.

There are several methods for upholstering a headboard. You can achieve the desired result using the carriage screed technique. To do this you will need thick fabric, a sheet of plywood, foam rubber, buttons for finishing, and a drill. From a sheet of plywood we cut out a blank of the required size, foam rubber of the same size, and also fabric for upholstery. We fold all the components and place them on the main workpiece. We drill holes in the right places, put buttons there with twine threaded through them and pull them to the wrong side. We fasten the folds of the fabric and buttons on the wrong side with staples, and close the wrong side with a piece of thick fabric.

Using approximately the same methods, you can make a headboard with an ornament made of nails or in the form of soft squares. In some cases, according to the bedroom design, it will be appropriate to make a headboard from smooth boards.

A double prefabricated bed will look great when an improved headboard element is added to the design as soft looking, and with a creative approach.

Additional equipment

The bed is the main component of the bedroom set. Sleeping places are located both in small apartments and in large apartments. Today, furniture designers are offering more and more new and modern models, having various additional equipment.

A box for storing bedding and linen is enough useful thing. With its help, the problem of clutter is solved; blankets and pillows will be kept in order. If we are talking about retractable mechanism, such a box should not be very large. Today, manufacturers offer modern models that have a continuation of the front part of the headboard in the form of a bedside table. It looks very unusual, original and comfortable. On such a console you can put the necessary small things that you always want to have at hand - a phone, an alarm clock, a favorite book.

Super fashionable beds have different lighting. They can be located on the side of the bed, at the head of the bed and can be turned on with an inconspicuous button. These devices can easily replace bulky floor lamps and Wall lights. They have built-in energy-saving lamps that will last a long time, and their consumption will be minimal.

Common mistakes

How to assemble a double bed according to the instructions is not an easy question; even if you follow all the instructions, you can make a number of mistakes that can lead to loss of time and incorrect assembly of the product. TO typical mistakes include:

• Beginners should not start by assembling massive and large parts. You need to start small, and there will be fewer mistakes;
• before starting furniture assembly, the number of parts and fasteners is not checked against the instructions; parts of the furniture are not examined for chips, scratches, or damage;
• inattentive study of the instructions can negatively affect the assembly process - the parts may be similar to each other, which will lead to their incorrect connection;
• fasteners from the set may be similar to each other, but used in different connections due to its diameter. And if in one case a long fastener can be used instead of a short one, then a short fastener will not be suitable for the role of a long fastener;
• by collecting parts on a carpet or any other soft surface, you can ensure that some of the parts get lost;
• Most of the bed parts are made of MDF, and if you make holes with a drill, the panels can burst. Bolts and screws are easily screwed in with a screwdriver;
• Failure to follow the assembly sequence according to the instructions will result in the double bed with a lifting mechanism being assembled incorrectly;
• If you do not glue some parts together with special glue, over time there will not be the required density between them.

I live with my wife in communal apartment, the room is quite large, 25 sq.m., but most importantly, the ceilings are 3 m, which, in principle, planted the idea of ​​​​an attic bed in my restless brain. And then some free time appeared and I began to design, invent and design my future child!

Result: the result is something like this, the size of the bed is 1600x2000 mm, the height under the bed is 1900 mm, so it’s quite A tall man will go under the bed without bending over, in full height, well, at the top, where you need to sleep, there is enough space to sit quietly and not hit your head on the ceiling, and yes, immediately answering your questions, it is quite comfortable to do this there).

Material of the whole bed, conifers wood, rolled (with rounded corners) board with a section of 96x36, 146x36 and sheets of sanded plywood with a thickness of 21 and 15 mm. You will see the principle of the bed itself, so to speak, a little later. I won’t describe how I looked for this board in September, October (at the end of the season), but in the end I found it at some sawmill, on the outskirts of the city... it is sold in 6 m lengths. I bought the plywood at Leroy Merlin and cut it to size there. But I had to tinker with the boards, since I myself could not trim and mill them according to KDD (Wooden Detailing Structures), since let me remind you, I live in a communal apartment, and there is simply no room for this, so I had to look for carpentry workshops that will take on this work . I searched for a very long time, as it turned out, our people are very lazy and picky, they simply don’t want to take on such work. But we are not made with fingers, so in the end I found some guys who decided to help me, and as it turned out, I came across very cool carpenters, their workshop is just great, and they live there, you won’t believe who...... RAVEN! RAVEN KARL, the real one!!!

Here he is handsome, he pecked my drawings)))

For scale, this bastard is chewing on an A1 drawing, which is almost a meter long!!!

The guys sawed boards for me, milled some of them, and I took them to my home.

Here you can see that ready-made and numbered (paper tape with numbers) parts arrived. Unfortunately, the details that were milled did not make it into the frame, but believe me, they were definitely there))) I saw it myself)))

The next question was painting. Since I was going to paint on my staircase, for these purposes, after careful selection, the choice fell on furniture varnish on water based Tikkurila Kiva 30 (semi-matte), I painted it in two colors, because I decided that my bed would be two-color and there was absolutely no other way))) It took me a long time to paint it staircase masking film, but the result is obvious, you need to wash away traces of painting hundreds of times less, and believe me, this is not an exaggeration)))) And I will immediately answer those who asked themselves a logical question: “Why didn’t he then order the parts to be painted in the same carpentry workshop ?" - the budget for the bed was limited, and the guys from the workshop asked for a pretty good amount, since they paint quite a lot expensive materials and only in paint booth, of course, the quality of the product will be immediately different, but I decided that for the first time producing such a bed, and, in principle, to improve my experience, I would paint it myself.

I painted in two layers, the first layer dried within 2 hours, so I finished all the details in 2 nights, and this is almost 45 sq.m. surface to be painted, and yes, I painted at night so as not to disturb the neighbors, by the way, there is practically no smell from this varnish, it smells like water-based paint. After complete drying, it looks very beautiful, the wood texture is preserved and, according to the manufacturer, the varnish even protects the furniture itself from impact loads.

So, when all the parts were painted, it was necessary to assemble this miracle of “engineering”, but as it turned out, there were some difficulties associated with my vision of the future bed: I wanted that, in principle, no fastening elements were visible on this bed. ... but turning over in my head many options for assembling this bed, I came to the conclusion that I could hide most of the screws, but some screws would still be visible and there was nothing I could do about it..... And stop looking questioningly into the monitors of your gadgets, now you will understand everything)))

Some part of the frame has already been assembled here, and as you can see, the bed posts are made of three rolled boards with a section of 36x96 mm, different color brown-white-brown (there is not enough façade board here yet).

On racks Brown, holes are milled for boards with a section of 36x146, these boards are the future basis for attaching the logs, on which sheets of plywood and the mattress itself will in turn rest. In this photo you can clearly see the attachment point for these boards. The end boards of the same section are literally inserted into the racks and have cuts at the ends for supporting the façade horizontal boards. A third board of the rack is screwed on top of all this disgrace and secures this “intricate” knot.

This is what the finished bed post looks like, this is the back bed post that will stand against the wall and will be secured with reinforced corners to the ceiling and floor. I’ll tell you right away why I didn’t attach the bed to the wall, but I was confused with longer posts... the fact is that the wall against which the bed should stand is, in principle, not a wall, but some kind of very flimsy partition and no matter what kind of fastening to it I would if I didn’t, it would still not be reliable.

Here is another photo of the finished rack, but during the assembly process, before tightening the screws, I always tightened the boards with clamps, since the rack is a pie of three boards and none of them are perfect and still have some kind of deformation, one way or another side, or even goes with a screw... then in order for the boards to fit snugly against each other, I had to tighten them like this.

In this photo, the future staircase is already beginning to emerge, I abandoned the vertical staircase at the design stage, they are not very comfortable... well, that’s my opinion... for you, everything may be different))) The load-bearing frame is already fully assembled, but it still walks and can turn from a rectangle into a parallelogram, well, if you look at it in plan (from above), the necessary rigidity of the bed will be given in the future by sheets of plywood, but for now we have what we have))) And yes, I’m not assembling the bed on her future place, but simply in a free place in the room, in the corner of the photo, if you noticed a mattress and a laptop on it, at the same time I looked at the drawings when I was assembling the bed.

Unfortunately, there is no photo report of how I assembled the ladder, but I had a lot of trouble as I assembled it alone. I somehow managed to mark the steps on my own, but with the placement of the second string... uhhh.... I can’t say a word or describe it with a pen))) The photo also shows already mounted logs and laid sheets of plywood 21 mm thick. ... And of course, my two animals, a Maltese and a Yorkie, are languishing in the arena; their future home will be there.

Actually, the loft bed itself in all its grandeur))) The interior under the bed has not yet been furnished, but everything is still to come! You need to sleep with your feet facing the stairs, and near your head, if you look closely, there is a sheet of plywood installed vertically, so to speak, a wall for support, and of course there is small shelf with sockets for charging the phone and sides so that the same phone does not fall from a 3-meter height)))

Well, as I said, a house for dogs has already been made)))

And here is actually the final result of my long labors, of course it turned out a little dark, but in principle the overall picture is visible)))

All price tags are slightly rounded for easier calculation.
- Boards purchased at a sawmill - 11,500 rubles.
- Delivery from the sawmill to the workshop - 2000 rubles.
- Trimming and milling of boards (turning them into parts) - 8,000 rubles.
- Plywood and cut it into parts - 3,400 rubles.
- Delivery of plywood to your home - 600 rubles.
- Furniture varnish with tinting - 8000 rub.
- All small things (screws, corners) - 500 rubles.
- Delivery of parts to home - 1000 rubles.
- Your own work is PRICELESS!)

Total: 35,000 rub.

For comparison:

A somewhat similar bed in Ikea, to be more precise, Sturo (there were mentions about it in the comments) costs almost 30,000 rubles, but if you have seen it up close, you will understand that this money is very expensive to pay for it.

Carpentry workshops that take on the production of such beds, according to my project, rolled out a price tag of 60,000 rubles. and higher.

Have a comfortable and beautiful bed everyone dreams, but for small-sized housing it is difficult to choose a model that would simultaneously meet all these requirements. It is important to use rationally limited area rooms, so you should pay attention to the option with a lifting mechanism. Self-assembly of a bed with a lifting mechanism according to the instructions in the video is a completely accessible process.

Having a comfortable bed allows a person to get enough sleep and regain strength before a new day. If the bedroom is no different large sizes, don't be upset. It is enough to choose a bed with a lifting mechanism, which is characterized by compact dimensions, high comfort and original design. Moreover, the cost of such furniture can vary, so you can choose an option to suit any budget. And to save even more, it’s worth analyzing how professionals assemble such structures and doing the same.

The assembly diagram of a bed with a lifting mechanism is quite simple, but first you should know the main advantages of such furniture. Products of this type provide a person with comfort during rest and sleep, but do not take up much free space in the room. The lifting mechanism is attached to a spacious box, inside of which you can store bed linen and bedspreads.

Thus, with a small area, you can solve the problem of storing bedding. For these reasons, beds with a lifting mechanism are so popular among owners of small city apartments. For self-assembly similar design

• You will need the following tools and materials:
• hardware;
• set of screwdrivers, ring wrench, screwdriver;
• wrench;
• yardstick;
• building level;
• hammer;

a sheet of paper, a simple pencil.

Thus, the work will not require expensive equipment or rare tools, which greatly facilitates the preparatory stage.

Assembly steps

• The entire assembly process consists of several important steps:
• installation of the box and base;
• fastening legs if necessary;
• installation of corner ties;
• installation of a traverse;
• installation of frame and mattress holders.

The instructions for assembling a bed with a lifting mechanism indicate all the work processes. At the first stage you will need:

• extract all elements future design from the packaging film, inspect them for defects. If one of the elements is defective, it will need to be replaced. A frame with cracks is unlikely to be reliable and safe for sleeping;
• lay out the drawers according to their intended purpose on the floor with the side with the holes facing up;

• connect the drawers to each other using fasteners, and then hang the head of the bed on the box you assembled with your own hands;
• To fix individual structural elements into a single whole, you will need to use a screwdriver and screws.

Note that some models may use longitudinal strength elements. For example, solid longitudinal ties, as well as corners or brackets that are fixed to the frame with screws. It is important to take this into account during the work process.

Housing assembly

For ease of assembly, the Selena bed frame is made of semi-assembled blocks:
1 - Front part, 2 - Headboard, 3 - Left strip, 4 - Right strip, 5 - Crossbar, 6 - Longitudinal strip.

Installation of legs

The supports of the structure are fixed to the frame using special platforms located on the longitudinal elements themselves, or screwed separately onto the frames. Then shelves and corners are attached in the upper part of the drawers. Some bed models do not have free-standing supports, instead a solid side frame is used.

Experts insist that you should not tighten the screws right away, because in the future you will need to align the drawers, shelves, and corners in a perpendicular plane. The lifting mechanism is secured at the next stage of work.

Installation of corner ties

This process is performed after attaching the supports to the bed and is necessary to make the structure more reliable and stable. Each corner tie consists of 5 parts:

• the screed itself;
• 2 footers;
• 2 countersunk bolts.

To work, you will need to use a 10 mm drill, screwdriver, hexagon or hammer. If it is necessary to disassemble the structure, the presence of a tie will allow you to easily disconnect the parts from one another.

Corner screed

Mounting the lifting mechanism

The next stage of work is to install and secure the lifting mechanism to the bed. It is extremely important not to make a mistake when placing it and determining the sides, because otherwise the smooth operation of the mechanism will be disrupted. To do this you will need:

• fix the bed frame on the lifting mechanism. Use screws for these purposes. Before tightening the fastenings completely, be sure to even out the gaps between the frame and the base;
• Clarify the required level of force to control the model. Installation of the unit into the lifting mechanism should be done by hand with the cylinder facing upwards, using nuts with a locking ring and fluoroplastic washers;
• tighten the nuts until they stop, and then loosen the fastening slightly, leaving minimal play. The operation of the lifting mechanism should be checked several times.

Mounting the lifting mechanism

Installation of frame and mattress holders

It is worth installing comfortable-to-use handles on the bed frame for trouble-free control of the structure, as well as a mattress limiter. All work must be completed by installing the bottom of the bed and putting the cover on its perimeter.

If the base consists of lamellas (from 15 to 25 pieces depending on the model), they will need to be hammered into special holders with a hammer. Each lamella is fixed on both sides, so the process may take some time. Now you know how to assemble a bed with a lifting mechanism, so this task will not be difficult.

Installation of slats

Possible difficulties

Of course, professionals with extensive assembly experience various kinds furniture can easily handle the assembly of beds with a lifting mechanism. But beginners in this matter may encounter some difficulties, which can be found in the table.

Remember a few more important points.

 Disassemble the bed may be required when moving or renovating a home. If dismantling is performed incorrectly, then it will no longer be possible to assemble the piece of furniture properly. Some items may be lost, others may be damaged. In addition, work associated with disassembling interior elements can be harmful to health - leading to lower back pain and pinching. Trust the dismantling of the bed experienced specialists, familiar with furniture assembly technology. You can invite craftsmen to any address in Moscow, as well as the nearest Moscow region, by calling or leaving a request on the website so that we will call you back.

 Our advantages:

• Professional craftsmen will help you disassemble the furniture
• Efficiency of work execution
• Help in assembling dismantled furniture
• Acceptance of payment upon completion of work
• Competitive prices

Features of disassembling beds of different types

Ordinary beds are designed quite simply. Sleeping furniture usually consists of a base, sides and 2 backs. For experienced craftsman It will not be difficult to disassemble them and then reassemble them. The main thing is not to lose screws or damage fasteners when separating parts. Difficulties may arise when you need to disassemble loft beds, transformers or bunk structures. Since the assembly of these interior items is quite specific, dismantling will not be easy.
  It’s good if you still have the instructions for assembling the bed. By following all the instructions from it in reverse order, you can disassemble an interior element consisting of even several dozen elements. True, instructions are often lost or thrown away by owners as unnecessary after the assembly of products is completed. If you are not sure that you can disassemble a custom bed and then put it back together, it is better to invite a furniture assembler. A person with experience will do the job much faster, saving you a lot of useful time.

 Disassemble the bed, and then “5 Masters” specialists will help you put it back together. We work with all types of sleeping furniture: from simple single and double beds to complex multi-level structures. Kit professional tools, which is at the disposal of our employees, will significantly facilitate the dismantling and assembling of furnishings.