≡× MENU

• Interior
• Window
• Walls
• Projects
• The buildings

Which grout for bathroom tiles to choose by Color (White, Gray, Black). Grout color for white tiles: how to choose and why dark grout is an ideal option How to choose the right grout for joints

The substance is easy to apply and can be found in different colors. The gaps will be resistant to high humidity, and also protected from mold and fungal infections due to antifungal additives. For example, in the bathroom it will be silicone best buy. But there are also limitations in application - in particular, an outdoor pool.

Latex

It is quite expensive, which is why pure material used extremely rarely. But latex is often added to cementitious compositions to increase the strength of the finishing layer.

Furanic

Almost the same as epoxy, but with one difference. Furan materials release chemicals when reacting with, and are therefore not recommended for residential areas.

Which grout should I choose for the bathroom, kitchen and hallway?

1. As intended

Namely, where will it be used: in the kitchen, bathroom, will it be laid on the floor or on the walls? For example, if it is (a wall), then it is considered relatively dry - yes, water gets there, and it is periodically wiped with a damp cloth, but still there is much less contact with water compared to the bathroom. In these cases, an ordinary cement mixture is sufficient. In wet areas you need something more durable - for example, polyurethane compounds. And when the surface is constantly in contact with water - in the same pools or on the wall around the bathtub or shower - it is better to use an epoxy mixture.

2. According to operating features

So, if you are covering a deformable base, you need an elastic finish - this is polyurethane or “epoxy”.

The use also imposes restrictions - hard cement will spread due to temperature changes and heating. Therefore, it is worth choosing more durable mixtures. In addition, pay attention to resistance to household chemicals - one way or another, you will use chemicals for, or to clean grease from a kitchen apron. Cement mixtures can only withstand alkaline compounds, and acidic cleaners destroy them. In this regard, it is a more universal “epoxy” that is compatible with any chemistry.

Tile is perhaps one of the most common decorative methods for finishing bathrooms and toilets, as well as special corners of kitchens. The reasons for its nationwide popularity are not difficult to indicate: ceramic cladding perfectly protects walls from the penetration of dirt and moisture, and is easy to clean and wash.

Besides, modern tiles can radically transform the appearance of a room. But competent finishing is for home craftsmen who rely on themselves and prefer to make repairs on our own, suggests the right approach.

It begins with thinking through the design, careful planning of the process, continues with the implementation of the stage of its competent professional execution, and ends grouting joints between tiles.

The last stage, it would seem, is not so important compared to the total amount of work. However, after laying the tiles and looking at the results of fruitful work, it becomes clear that without the final stage, it is impossible to achieve perfection.

Only this procedure makes it possible to give the cladding a complete aesthetic appearance, impressive in its neatness. It hides defects (when they exist) caused by incorrect actions during installation.

In addition, if the space between the seams is protected from moisture penetrating into every crack, then layers of disgusting mold and colonies that are dangerous to health and pathogenic will not grow on the walls, ceiling and floor.

But since grouting is necessary, the question arises: which one is better to use, and how to do it using technology that guarantees a neat, beautiful, quality look premises after renovation?

In the photo there are seams between ceramic tiles without grout

Choosing a material is not an easy and responsible matter, depending not only on whims and one’s own desires, but on necessity, based on many indicators. First of all, it is important to assess the size of the gaps left during the finishing work when laying the tiles.

There must be a space between the modules so that the integrity of the cladding is not compromised, because as the glue dries, the tiles begin to mix slightly and shrink. The tiles “breathe” through the remaining space, and this circumstance cannot be ignored.

• Wide seams, larger than half a centimeter, usually occur when using porcelain tiles for the floor, the dimensions of which are never small, and therefore must be designed accordingly.

For grouting floor tiles It is better to choose mastics made from resins. They will provide excellent protection and satisfy aesthetic tastes.

• Narrow seams, not exceeding 5 mm in size, are usually formed during facing work to protect walls from dirt and decorate them. Here it is better to use moisture-resistant mastic compositions produced on a cement basis.

Additives, additives, plasticizers only improve the properties of this material. In stores, such grout is purchased in the form powder mixture, having a very affordable price.

• Joints in the corners of the bathroom, where excellent waterproofing is required due to constant high humidity, are recommended to be treated with silicone sealant. It is he who is able to perfectly protect walls and floors, especially in places where plumbing fixtures are placed, ensuring proper sealing and grouting tiles in the bathroom.

This part of the finishing work also performs decorative functions, which is why the choice of shade is so important. And here a whole range of options is possible. You can make the necessary material yourself.

True, this task has some difficulties. During the creation process, achieving the required color range, it should be taken into account that when drying, the grout sometimes becomes a couple of tones lighter.

• The white color of the grout turns out to be very useful if the tile design is made with some defects. This shade is not flashy and therefore will not be too noticeable to observers. This is an excellent way to compensate for the lack of professional skills, which is often very useful to use.

• It is advantageous to choose a contrasting shade with the general background of the laid tiles if, contrary to what was previously described, the cladding is done perfectly. Similar game colors will only emphasize the quality of the work.

• Transparent grout, which does not reflect the tiled light and whose color scheme resembles thoroughly diluted milk, finds its best use in the version with multi-colored tiles.

Similar ideas are often implemented in interior design when complex solutions from color mosaics are implemented. But transparent grout is usually used if the size of the seams between the modules does not exceed 2 mm.

Committing grouting tile joints It’s most convenient to use a ready-made color scheme, because large manufacturers of these products, presenting new collections, offer an excellent selection of materials.

A variety of quality and color characteristics is obtained through the use of new technologies. The seams between the tiles can be filled with metal, the joints can be made of bronze, silver and gold.

In accordance with your own taste and design fantasies, it is always possible to choose something interesting, unusual, and impressive.

Types of grout

To finish the seams, mastics are used - special putties purchased ready-made composition or in dry powder form. In the second option, which is more suitable for DIY tile grouting, when using the mastic, you have to prepare it first.

It is diluted with water and stirred construction mixer. This is not difficult to do, since the proportions necessary to comply with this procedure can be found on the packaging.

It is also possible to buy ready-made fugues in an already diluted form, but in order to save money, it is not entirely advisable to do this, and tile grout price will increase significantly.

• When using a material, it is necessary to take into account its original properties. The convenience of cement-based mixtures, the qualities of which are only improved with the use of additives, lies in their rapid drying.

But in the absence of appropriate skills that slow down work, this circumstance should be taken into account. We have to try to use the material as quickly as possible.

Otherwise, the substance will soon harden and become unsuitable for consumption. And when making repairs, you should dilute the components in exactly the quantities that may be required.

• When using resin-based mastics, it is best to pay attention to epoxy grouts, which are popular among experienced repairmen.

The line of such products offered in stores is endowed with high viscosity, and therefore is extremely in demand when finishing moisture-resistant rooms. This material has many advantages, and the negative indicators are practically reduced to a minimum.

After drying, this material is stronger than plastic, washes well and rarely gets dirty. In this case, any means are perfect for cleaning tiles; such grout is not afraid of even the most aggressive chemicals, although to keep tiles with a similar finish in order, soapy water is often enough.

Epoxy fugues are not afraid of heat and significant frosts and, unlike cement-based products, do not crumble over time, although they do fade. Fugue with furan resin components, often used for finishing work in factories. Similar material very stable and not affected by chemicals.

Among the main disadvantages of epoxy grout: high hardening speed (only about an hour). This feature undoubtedly makes such a composition unpleasant for use by non-professionals, who find it difficult to get rid of the problems that arise in connection with the specified property of this grout.

If material costs do not bother the master, it is undoubtedly more convenient to use finished products For grouting tiles: buy and avoid spending time and effort on preparing material for repairs, since everything necessary is done industrially.

But when opening the container, you first need to inquire about the shelf life. Otherwise, a huge part of the product may go to waste, which will never happen if dry formulations are used. This mixture can be stored for as long as desired.

• When finishing facades they are used special materials, which means it will be necessary grouting clinker tile joints. It is made with the calculation of compensation for the undesirable effects of temperature fluctuations, so that the fragile does not crack.

It is more convenient to apply the grout in dry form and unroll the finishing material immediately before work. The range of colors offered for joint fillers is extensive, but there are no specific recommendations for choosing a tone. Here everyone should be guided by their own tastes and priorities.

Applying grout

When the right choice of material has been made, the next stage of repair should be preparing the tools for the job. First of all, you will need a flexible rubber tile grout spatula.

This tool can be replaced with a pastry bag, which will help to carefully and efficiently fill the joints between the modules with a fugue if the distances between them are too large. In addition, you need a sponge for rubbing and a brush.

Finally, you can move on to the main stage. The grouting procedure itself is not particularly difficult, you just need to follow a simple algorithm.

1. Dust and dirt, as well as adhesive residues, are carefully removed from the tiles. Next, you should knead the composition in small portions to seal the gaps between the tiles and wait about ten minutes so that all the processes in it are brought to full readiness.

2. Before starting work, each seam, previously treated with antifungal compounds, should be generously moistened with a wet sponge. Such a ritual is necessary for disinfection and so that less moisture is sucked out of the grout.

3. Application begins from the farthest edge of the room. To do this, use a spatula to smooth out the gaps between the seams until the voids are completely filled. Next, excess grout mixture is removed to the boundaries of the tile modules.

4. To prevent cracking of the grout, after finishing work, wet the filled joints with a wet sponge. This should be done when the solution dries a little.

U experienced craftsmen All the work described takes a little more than a quarter of an hour. But we should not forget that as the grout dries, the space between the joints sags. For this reason, the procedure takes place in two, sometimes even three steps, and the boundaries of the wall and tile cladding are sealed with silicone sealant.

5. After the grout has dried, the joints are treated with an antiseptic and epoxy resin to protect the tiles from water penetration and extend the service life of the finish.

6. Next, with a damp sponge, remove all dirt remaining after finishing work. And then all that remains is to take care of the seams, keeping them clean using a solution of soapy water, vinegar, citric acid or a suitable disinfectant for cleaning.

How to prevent cracking?

At the joints between modules, the grout may begin to develop cracks. How to avoid this? First you need to understand the reasons, and then perhaps draw conclusions.

• This may be a consequence of a violation of the technology when mixing the solution. When diluting yourself, all rules must be followed, and the resulting substance must sit for at least five minutes before use, then mix again.
• In some cases, cracks begin to appear during the process of applying the grout itself. This becomes a signal that the solution prepared for work is not thick enough. Using too liquid a material is an unpleasant but correctable mistake.
• To eliminate its consequences, rub the dry powder ingredient directly into the cracks that have formed. The composition of the solution also has to be changed, bringing it to a favorable consistency. It should have medium viscosity and be homogeneous.

• Cracking can be caused by the condition of the seams. Make sure that they are wide enough and that during preparatory work cleanse thoroughly.
• External factors can be the culprits for cracking. For this reason, grout should not be used in abundance indoors (especially in the bathroom) during the drying period. hot water and also provide ventilation.

Summing up and making a final conclusion, it should be concluded that the main rule in work when carrying out grouting ceramic tiles– this is the strict implementation of all instructions.

It is better to strictly adhere to what is written in the instructions on the packaging, taking into account information about the width of the seams, the application of the material and the conditions for its drying. Then there should be no problems, unless, of course, the tile itself is placed on an unstable, for example, wooden base.

How to update the grout between tiles?

After completing the finishing work, you can enjoy the fruits of your labor. However, in some cases the feeling of satisfaction is short-lived. And after some time, the grout loses its freshness, and the appearance of the finish becomes not at all as wonderful as it was after installation.

• There are several ways out of the situation. To update, the grout is bleached using hydrogen peroxide and soda. Having mixed these two components, the resulting substance is applied to the seams using a regular toothbrush. But it is better and faster to update the openings using a steam cleaner.

When the appearance of the tile ceases to please you completely, you should not rush to dismantle it or run to the store for a new one in order to urgently make the next repair.

Often the cause of the unsatisfactory condition of the ceramic finish is contamination of the joints. In some cases, it may be sufficient to simply make grouting old tile joints. There are several ways to achieve your plan.

• The most practical and easiest method is dyeing. However, in this case, the appearance of the tiles will change for no more than six months. In addition, difficulties may arise with finding a paint composition suitable for a humid environment.

It is also possible to apply a new layer of grout over the old one. But this makes sense if the seams between the modules are sufficiently voluminous and have recesses of at least two millimeters.

• Radical, and therefore effective, measures to update the appearance of the cladding include a complete replacement of the contents of the joints. But how to remove grout from tile joints?

Fresh grout material, no more than a day old, can simply be soaked with water if for some reason it has become objectionable. And after thorough cleaning of the intermodular openings and complete drying, there is a second chance to do everything the best way.

You can use sandpaper rolled into a tube when the grout has had time to set, but from the moment repair work Not much time has passed. If the surface of the tile is contaminated with old grouting material, you should resort to using regular sunflower oil, which will help remove unpleasant residues.

When the described options are not suitable for eliminating outdated grout due to long term operation, there is nothing left to do but resort to a mechanical method of getting rid of the contents of the intermodular openings.

1. Before starting work, sharp object(you can use a knife) should be drawn straight along the tile seam, and then, changing the angle of inclination, do the same two more times, only a little to the left and to the right of the original line. Next, use a drill and an electric drill.

2. If the tiles have become completely unusable: they have broken off and hardly stick to the surface, easy repairs and cosmetic measures will no longer be possible.

3. The mechanical method of removing old grout will negatively affect the condition of the old tile, and it may well happen that it will simply begin to crumble. The best decision in this case is to replace the old finish with a qualitatively new one, which will be more beautiful and more comfortable.

In addition, there are some types of grout that successfully resist staining. For example, epoxy grout, which is ideal for use in the kitchen. It is resistant to stains from spilled juices, coffee or wine.

Types of grout for tiles.

There are many types of tile grout. Conventional grout is a multicomponent mixture based on cement and many different additives. The properties and characteristics of a particular grout are determined precisely by the presence of certain additives. Some of them block the growth of fungus, while others give the grout water-repellent properties. As a rule, grouts are sold as a dry mixture, which must be diluted in the required proportions with water or liquid latex before use. However, there are also ready-to-use compositions that, although they are somewhat more expensive, can still save a lot of time.

The grout is cement sand.

An interesting type of grout is cement-sand grout, which is a cement mixture with sand added to it. The sand gives the grout the necessary strength. The disadvantage of such grout may be low resistance to moisture, cleaning agents and mechanical stress, since over time the cement may crumble. Sand grouts are convenient for sealing large joints (from 5 mm). For small joints it is better to use compounds without sand. We also add that sand grouts are not used when working with marble tiles or glazed tiles.

Epoxy grout for tiles.

Epoxy grout for tiles It contains a base in the form of epoxy resin, to which a hardener and a set of coloring pigments are mixed. This composition gives the seams strength and density, resistance to moisture, acids and other chemicals, and also guarantees resistance to the appearance of stains on the surface of the seams.

Interestingly, the color of epoxy grout for tile joints can last for decades. Fungus does not form on such compounds, and seams treated with such grout stop absorbing moisture. It is not surprising that epoxy grout has the highest price among similar compounds. Improved grout compositions can even include silicon elements and shiny components (gold, silver, metallic), which allows not only to process seams, but also to create an unusual decorative pattern.

Epoxy-based grouts are best used for working with wide joints, with a width of 6 mm or more. The fact is that such grout is viscous and does not penetrate small cracks well.

Grout with furan resin.

A special type of grout, grout with furan resin, is considered the most reliable type of grout. Such compositions make it possible not only to protect seams from fungi, but also to completely protect them from strong acids, alkalis and other aggressive chemicals. Grouts with furan resin are difficult to use - before working with them, the entire tile should be covered with a layer of wax, and excess grout should be carefully washed off with hot steam.

What grout color should I choose for the tiles?

Each of you can make regular grout colored. To do this, you need to mix cement with sand, adding paint to the resulting mixture. Of course, it should be remembered that such “grout” may obtain a different color from the intended one, and over time it may fade. It is easier to purchase ready-made grout with the desired shade. Such compositions have undergone uniform coloring and, thanks to their balanced composition, will retain their color unchanged for a long time.

Designers other than the usual ones color options they can grout the tiles with white grout or completely colorless compounds, while some, when renovating an apartment, want to make the tiles more contrasting and bright. However, the standard advice for choosing grout color remains unchanged. You should choose grout according to the lightest tone of the tile ornament (if it is light), or, conversely, according to the darkest tone. Designers are constantly experimenting, creating the most unimaginable solutions.

One of the latest is the “eye-catcher” style, which allows you to combine green tiles with orange grout, or white tiles with black grout. In general, we note that approximately the same color of grout and tiles will help hide the seams; neutral colors of grout are best used for working with irregularly shaped ceramics in order to hide uneven seam lines.

The last, final and very important touch of laying tiles is grouting. And at this stage, many people have a dilemma: what to use to grout these same seams and how to choose the color of grout for the tiles. We will try to understand these questions below, we will analyze which color of grout is more appropriate to use in certain cases and consider the main types of grout mixture.

Selecting grout color

It is simply impossible to definitely recommend which color of grout mixture to choose because each person has their own preferences and tastes, but there are generally accepted design rules, following which you can achieve excellent results.

Rule one. In the case when you have been racking your brains for a long time and cannot choose something specific from the entire palette of colors, or you have no options in your head at all in what color to decorate the tile seams, then the best solution in this situation, white grout will be used. This color is universal, harmonizing perfectly with all other colors.

Rule two. If you are not a supporter of all kinds of experiments and like things to be beautiful, but “strict”. Choose grout that matches the main color of the tile or the color of the pattern depicted on it. By rubbing the seams in this way, you will be sure that you will achieve a good result and the room will look beautiful and harmonious.

Rule three. When you want to achieve something unusual and bright, you can try to play with contrast, that is, choose a grout of a completely different color than the tile, but be careful, such experiments are fraught with unpleasant surprises; if you choose the wrong color combination, the effect will be exactly the opposite of what you wanted to see, and the room will become dull and uninteresting. Therefore, when considering contrasting options, it is best to consult with professionals and ask about the colors that combine best with each other.

Rule four. It is best to purchase grout together with the tiles; store salespeople know their product and will be able to advise the best option that can be used with the finish you like.

Rule five. There are often situations when a person knows what color of grout he needs, but cannot find it in stores. In such cases, it is advisable to use a color that is one or two shades darker than the color you need. The mixing process will be like this - add color to the white grout, mix everything thoroughly and apply the finished mixture in an inconspicuous place, wait for it to dry completely and look at the result, if it suits you, good, if not, repeat the experiment again, but with a different color.

Main types of grout mixtures

When studying the question of how to choose the color of grout for tiles, it is worth understanding what kind of material there is in general. In modern construction, there are two main types of grout, differing in composition and scope of application. Therefore, it’s worth taking them apart and deciding which one you need.

So, there are mixtures:

Cement grout— is made on the basis of Portland cement and is the most common type of grout mixture.

Recommendations on how to choose tile grout by color and create a designer coating

This material has a lot of advantages: it is easy to work with, even a person who is far from a professional repairer can handle it (if you are interested in how to properly grout tile seams with your own hands, then an article on this topic is here), it can act as a leveler and eliminate small surface defects, yes and the choice of colors is quite wide.

But there is also a significant drawback to this material, namely, in its pure form it does not tolerate high humidity, and therefore is not resistant to the appearance of fungus and mold, but this can be easily corrected by adding specialized additives to the finished mixture.

In some cases, these additives are already included in the mixture, so in order not to overpay, it is more advisable to buy grout that meets exactly your goals and objectives.

Epoxy grout. The advantages include: increased wear resistance, moisture resistance, protection from fungus and mold, and the fact that the color of the grout does not change throughout its operation.

Of the minuses - 1. the material has a high viscosity and begins to dry out very quickly, so it will be very difficult for a beginner to work with it. 2. The price is an order of magnitude higher than that of a cement-based material.

That's all, I hope the article will be useful to you, if you have any questions, ask them in the comments.

Video on the topic “Grout for tiles, how to choose a color”:

Which grout to choose for white tiles

Grout color for white tiles: how to choose and why dark grout is the ideal option.

True elegance and beauty are, as always, hidden in simplicity. Simple things are always distinguished by their unique elegance, are easily combined with other items, and do not lose their relevance regardless of capricious fashion trends. All of these statements are true for white tiles.

Finishing with white tiles is a classic and quite strict option, but at the same time universal and not boring. White tiles always remain at the peak of demand in interior design and this can be explained by the fact that White background It’s easy to make it bright by simply decorating it with colored or neutral elements. White color combines perfectly with a variety of color shades.

But when choosing white tiles for finishing floors or wall surfaces, the question often arises - how to choose the color of grout for ceramic tiles of this type light shade? Should it match the color of the tiles tone-on-tone or is it better to choose grout in a contrasting color? Is it possible to choose dark grout for white tiles? We will try to answer all these questions in the following sections of the article.

Tips for choosing grout color for white ceramic tiles.

So which grout should you choose for white tiles? Traditionally tile joints either they are carried out strictly in the tone of the material, or a composition is chosen for them that is as contrasting as possible to the color of the tile. This rule is true for ceramic tiles of any color, not just light ones.

It should be understood that the choice of grout should really be as contrasting as possible, otherwise the seams will appear dirty and untidy. That is, it is strictly not recommended to use beige, cream or grayish grout with white tiles.

Professionals use three variations of grout material with white tiles:

Compositions identical in shade to the tile itself;

Dark gray grout mixtures;

Dark grout.

Colored grout can also harmonize well with white tiles. However, this is a rather extravagant solution, because bright seams will catch the eye and at the same time highlight the slightest defects and unevenness in the laying of the material.

How to choose tile grout by color if you still decide to choose this one bright option? One piece of advice can be given: in this case, the seams of the coating should repeat the shade that is already found in the decoration of the room. For example, to harmonize with the color of furniture or flooring.

Which grout should I choose for white tiles: dark or light?

Dark grout to match white tiles is definitely a practical option. Dark-colored seams will not lose their attractive appearance over time; you will not have to spend time regularly cleaning them from dust and dirt, and accordingly, all maintenance of the lined surface will be simplified.

If practicality interests you little, and you think much more about aesthetics general view, then when choosing a grout color for white tiles, you should be guided by the following criteria:

Seams contrasting color will allow you to favorably emphasize the originality of the laying of the material and focus on the geometry;

When laying tiles vertically, dark grout will help make the room visually taller, but at the same time narrower. If you don’t need such an effect, then choose a grout material that matches the tiles.

When choosing the color of the grout material for processing the seams of light tiles, be sure to take into account the general stylistic direction interior The tandem of dark grout and white tiles looks sharp and daring and is therefore more suitable for ultra-modern styles.

There is one more rule for using black grout with white tiles - there must be other black elements in the interior. For classics, a harmonious combination of light tiles and light grout is more appropriate.

Ceramics are most often used to decorate a bathroom. Laying tiles includes several stages. The final stage of cladding includes rubbing with a fugue between the seams. Let's take a closer look at which grout to choose for bathroom tiles.

Varieties

Ceramics are used in the hygiene room, because this is a room with high humidity and constant temperature fluctuations. The tiles are not afraid of moisture and are easy to install. But, with any cladding, there are always gaps between the tiles. Water, dirt, and mold can get into them. Therefore, the role of grouting mixtures is so important. You can figure out which grout is best for bathroom tiles by looking at the varieties of this material:

The choice of grout for bathroom tiles depends not only on the properties of the material. The color of the mixture is important. For some time, only white formulations were available. Manufacturers now offer a large selection of color shades of grout materials.

To find the perfect color grout, take a sample of the tiles with you to the store. This makes it easier to choose the right shade.

White tiles

When the room is already tiled, it is important to choose the right grout mixture to match the color. Before purchasing, decide how you want the bathroom to look. Perhaps it will be a contrasting cladding or, conversely, the seams will be sealed to match the ceramic.

White color has always been considered universal, suitable for any shade. But, if the tile itself white, how to choose grout for tiles?

What grout color should I choose for white tiles to make the cladding look more impressive? Best options such:

• play on sharp contrasts;
• pure white (creating the effect of one, clean coating).

If you have any doubts about which grout to choose for white tiles, then immediately abandon beige and gray shades. So the cladding, and along with it the grout for white tiles, will seem dirty and unsightly.

Beige tiles

Look at the photo for the grout color for beige tiles. Here are the views of experts as follows:

• It is better to choose mixtures slightly darker than tiles. This way you can emphasize delicate shade ceramics;
• the tiled shade is lighter, so it will look better against the background of darker seams;
• It is advisable to select the tones of the grout in light colors with a brown or orange tint.

What color of grout to choose for beige tiles also depends on the color of the plumbing fixtures and the style of the interior - everything should be combined.

If it’s too difficult to decide which grout to choose for beige tiles, then stop at optimal solution- white or a very light tone of gray.

Floor tiles

To choose a grout for floor tiles, you need to consider the following points:

• percentage of tile shrinkage upon final drying;
• level of moisture absorption;
• strength;

The flooring of any room is constantly exposed to heavy loads, which can lead to slight deformation. Therefore, it is important to correctly select the grout mixture for the tile surface.

You can choose a grout for floor tiles that is silicone based. Other varieties are more fragile and more susceptible to stress. But, in any case, choose a composition that contains protection against mold fungi.

Tools

To perform quality processing tile joints, the following tool is required:

• container for diluting the powder mixture (fugue is usually sold in powders). A small plastic basin or bucket will do;
• spatulas for stirring and applying the composition (metal and rubber);
• a soft cloth for cleaning the surface after work;
• ladder.

Almost every home has such a simple set of tools. And it’s not difficult to purchase it.

Smart selection

The best grout for tiles is the one you choose yourself, but you should listen to the following tips:

1. the entire tile layout together with the seams will be noticeable if the fugue is much darker or lighter than the cladding;
2. the coating will appear as a single whole if the shade of the fugue matches the tile. This option is ideal, if shortcomings appear during the work, they simply will not be visible;
3. the white grout mixture constantly becomes dirty;
4. if the cladding is made of mosaic tiles, then your option is a transparent fugue.

Which tile grout is best is decided in each case individually.

In addition to color shades, you can choose pearlescent or glow-in-the-dark grout.

The working process

Having figured out how to choose a tile grout by color, feel free to get to work. To start preparing:

• Grout the seams only after the tile adhesive has completely dried (about two days);
• Clean between seams thoroughly. Remove debris and adhesive residues.

It happens that grouting work is carried out on the old coating, just to update it. In such cases, it is necessary to remove the remains of the old fugue. The old grout mixture is removed with a extender. The special mixture is applied until the seams are completely clean. Wait until the old composition begins to be easily removed, otherwise you may damage the ceramics.

After removing the old mixture, wash the entire surface. Leave the tiles and grout to dry completely.

Powdered mixtures are diluted with water and mixed well. Then more liquid is added to create the desired consistency. Before starting work, stir the mixture again.

The application process is as follows:

1. Place a layer of fugue on a special grater with a spatula;
2. take a grater with the composition at a right angle and press it against the wall (floor);
3. make leisurely, diagonal movements until the seams are completely filled;
4. repeat the whole process again.

Upon completion of the troweling work, it is necessary to remove excess fugue. Carefully remove any residue with a soft cloth. When the grout layer is dry, wash the entire tile surface.

Grout rating

How to choose grout for bathroom tiles so that the gaps are not too noticeable and blend in with the tiles? Please pay attention to the following details:

• read the ingredients on the package;
• reviews about the manufacturer;
• shelf life of the mixture.

The best grout for bathroom tiles is one that matches the color of the ceramic and matches the overall interior of the room. Rating the best grout for bathroom tiles from the following manufacturers:

A little advice: before making a decision when buying a fugue, try making a sample. Apply a little product, let it dry - the real color will appear. The reason is that after drying the fugue becomes lighter than the stated shade.

Grout for every taste

Which grout is best for tile joints depends on each specific case. When choosing, focus on the following indicators:

1. if you want to focus attention on the ceramics itself, then select a darker grout;
2. light colors will create the effect of a single space;
3. small tiled elements look great with seams rubbed with a fugue of a contrasting color;
4. white, as always, is universal.

Regardless of which grout you use to grout the tiles in the bathroom, it serves the same purpose - it protects against moisture and mold penetration. As a visual example, evaluate how light tiles with dark grout look in the photo.

It is important that the color of the grout mixture not only matches the ceramic, but also emphasizes its advantages. It is necessary to choose the color of grout for the tiles so that the following characteristics are met:

• If the tile installation is perfect, you can safely buy a contrasting fugue. This technique looks good if the bathroom is laid out in two color shades;
• gray grout mixture goes well with red and black ceramics;
• if the tiles are creamy, try gold-plated grout;
• For the mosaic version, only a contrasting fugue is suitable;
• if the bathroom is tiled in three different shades, then use the beige option;
• An interesting option is a selection of fugues to match the tone of the bathroom fittings.

After finishing the bathroom, you will have a wonderful opportunity to use your imagination. Seal the seams with a fugue of an unusual color. Imagine, experiment. You can try a combination of colors or play exclusively with contrasting options.

Important: when choosing a grouting material, you should know that its color can visually reduce or increase the space of the room. The shade of the grout also affects the perception of lighting in the bathroom. If the color of the grout is not chosen correctly, the bathroom will look dull and uninteresting. Even unusual accessories will not save you.

If the bathroom has a small area, then choose a lighter fugue (this also applies to the tiles themselves). Large spaces, on the contrary, are best made more compact by choosing darker colors.

When laying mosaic panels, a transparent or colorless grout mixture is suitable.

For pure red tile material, use pink grout to grout the seams.

Do not mix white tiles with the same fugue color - they will simply get lost. For multi-color ceramics, purchase the lightest or darkest colors.

Tile grout - how to choose a color?

Currently, the building materials market is replete with various mixtures designed to bring completed finishing work to a high aesthetic level. Such materials include, among other things, all kinds of grout mixtures for joints after tiling walls (floors). But a fairly wide range of grouts can raise a completely legitimate question about how to choose the right color for the grout of ceramic tiles.

Selecting grout color

It should be noted that a correctly selected grout mixture can not only emphasize the beauty of the tiles, but will even hide minor flaws made during the installation process.

Therefore, when wondering how to choose the color of grout for tiles, first of all, remember a few tips that will help you decide on the choice of grout (the term is a synonym for the word “grout”):

• a lighter tone of the grout relative to the color of the tile will blur all individual parts of the cladding, but a darker tone of the fugue, on the contrary, will create a geometrically clear pattern and emphasize each tile;
• Fugues of a contrasting color look best when grouting joints on small tiles (optionally on mosaics);
• so as not to interfere with the perception of the integrity of the pattern of mosaic panels or tiles with photo printing, you should choose a grout of the same tone with the dominant tone of the image or transparent (colorless);
• for grouting joints on the floor, for obvious reasons, you should not use white or any other fugue light color. In this case, it can be considered optimal to choose the tone of the grout mixture, which is as close as possible in color to the composition on which the tiles are laid.

  Black grout for tile joints in Arzamas

  A brown or blue-gray grout mixture is also suitable.

Choice of grout

Let's consider the options for choosing grout for the most common tile colors - beige and white. So, what color of grout is best to choose for beige tiles? The classic option of combining the color of the tile with the tone of the grout can be considered a win-win. But to prevent adjacent tiles from merging into a single spot, which does not always look aesthetically pleasing, the tone of the grout mixture should still be slightly darker than the color of the tiles - darker grout will create clear lines and help highlight each tile. But to give the interior some unusualness and mystery, you can take advantage of a new product on the construction market and apply a grout mixture with fluorescent particles to beige tiles, which glow with a muted bluish-violet glow in the dark. But this is, as they say, a choice “for everyone.”

Now let’s look at the question of what grout color to choose for white tiles. There are many options here. Therefore, approach the choice of grout based on your preferences and capabilities. The classic option is to choose grout that matches the tone (or rather, a little darker) of the tile. But keep in mind that over time, white grout may turn yellow. Fans of clear graphic images can choose a sharply contrasting fugue - black. But even in this case, there is a “but” - the tiles must be laid perfectly, otherwise, with a sharp contrast of colors, even the most insignificant mistakes in the facing work will be visible. The most acceptable and at the same time effective choice of grout is light green, blue or orange color. Especially when it comes to tiles laid in the bathroom. Then you can create very harmonious interior, choosing accessories to match the color of the fugue - towels, soap dish, bathroom curtain.

Related articles:

Corner shelf for icons with your own hands An integral part of the interior in an Orthodox family is a shelf with icons, which occupies a place of honor. In the master class we will show you how to make a shelf for icons with your own hands.	Wall design with wallpaper in two colors To get an original and modern interior, it is not necessary to resort to expensive types of finishing to create stylish design It’s enough to decorate a room with two types of wallpaper, choosing the right combination. Our article will help you with this.
Even using the simplest method of wall decoration, namely wallpapering, you can get a unique and inimitable interior if you approach this issue creatively. We will talk about some options for wallpapering in the article.	How to choose skirting boards for suspended ceilings? The plinth will make the interior of your home complete and defined, and will also transform the design of the ceiling. We will tell you in the article which plinth to choose for stretch ceiling design.

How to choose the grout color for tiles? Let's learn the basics of this business

Repair does not tolerate trifles. Even mere trifles, for example, how to choose the color of grout for a tile, are sometimes so necessary to know. And this is due to several simple reasons. Firstly, if you don’t get the shade right, you risk disrupting the whole composition and spoiling the entire impression of the delicately laid tiles according to all the rules. And sometimes it can make your life very difficult during the further operation of the premises. And not only purely physically, but also psychologically: if you allowed yourself to be quite bold design solution, and while using the room you get the feeling that it is starting to put pressure on you, you intuitively try to stay there as little as possible.

Of course, color solutions are largely determined by personal or design tastes. But it’s also worth thinking about the fact that over time, not too calm combinations of shades can begin to unnerve and even irritate. And the opinions of family members who will start using the same as you common areas, should also be taken into account.

On this side, it would be nice to listen to the opinion of psychologists who do not advise choosing sharp contrasting combinations, for example, scarlet and black, for interior work.

How to choose a grout color for tiles, also depends on where exactly the tile is located, on the floor or on the wall. In general, as with any repair issue, there are some nuances here, which we will talk about in our article today.

General settings

• If you are choosing a grout for floor tiles, you should not buy white or even just very light. Even if the tiles are in light colors. On walkways, the seams will quickly become clogged with dirt and take on a sloppy appearance. Tilers advise choosing either gray grout to match the cement, or choosing it a couple of shades darker than the shade of the tile. If it is fundamentally important for you to have light-colored seams, use epoxy putties, but keep in mind that they are much more expensive than others, and it is quite difficult to work with them without the appropriate skills.
• If the walls are lined with plain tiles, the grout for the joints is slightly lighter than the tiles.
• When using multi-color tiles, you need to determine which tones are the darkest and lightest. In small rooms, the grout is selected to match the palest shade. In large ones - any of your whims, but if you want to visually make the room smaller, make it more compact and cozy, lean towards dark grout.
• If a panel is laid out on the wall, then the joint putty is chosen to be as inconspicuous as possible so that it does not distract from the pattern and does not break it into separate fragments. You can go two ways: either grout each area with a corresponding shade, or buy a special chameleon grout, which itself is colorless and takes on the shade of a nearby element.
• Contrasting grouts are quite acceptable. But keep in mind that colored tiles, separated, for example, by white (or other colored) seams, look more geometric. Also, keep in mind that contrasting putty may leave marks on the tiles. You need to apply it to the sample and check whether the coloring remains. If yes, then you should either look for another putty, or ensure its immediate removal and secure the seam with varnish or sealant.
• If the tiles on your walls are white, do not delude yourself and take the first grout you come across. White color has many shades that cannot be detected by an unprofessional eye, and will look inharmonious with snow-white putty. The choice here must be made even more carefully than with tiles of other colors.

In any case, no matter what option you choose, you need to go for grouting with examples of the existing tiles. Many manufacturers offer samples of final fugue shades to customers because it changes color slightly as it dries. They need to be applied to the elements taken with you in order to assess the degree of compliance.

Some nuances

If your wall is tiled with small tiles, you should not draw undue attention to the seams: the result will be a crushing effect, and the room will not look finished. It is better to choose grout that is as close in tone as possible to the tile.

If you decide to go with contrasting grout, match its shade with the furniture and accessories in the room.

Black-black grout

Otherwise, there is a possibility of getting a design that is too colorful. Moreover, it makes sense to choose contrast only when the tile layout is, as they say, ideal. The slightest defects, even a difference in seam width of half a millimeter, begin to catch the eye.

From color combinations The following are considered the most successful:

• green – white;
• blue – yellow, optionally – white;
• chocolate – sand (alternatively – beige);
• gray – pink;
• green yellow;
• lilac – white;
• red - yellow or white.

Moreover, the tiles should be darker, not the grout filler! Other color combinations, even if they seem successful at first, will soon become tiresome and annoying.

One more moment

Some inexperienced builders believe that the puffer can be tinted in the same way as is done with paint. A fundamentally wrong opinion! Pigments created individually for grouting do not exist in nature. The color added to the white putty is washed out over time, because any tile is washed at least occasionally, and even with aggressive chemicals. As a result, the pigment is extracted from the seam unevenly, and literally after 2-3 washes you will get indistinct spotting in the seams. Moreover, all colors violate the structure of the grout; after they are washed out, it begins to crumble and spills out of the seams.

And one last thing. If you rubbed the seams and the end result did not inspire you, you can try to correct the situation with the help of special paints. For example, Duffa products adhere very well to almost all grouts. However, this method is only suitable if the paint is darker than the grout and is not too contrasting in color. The option is not the best, but it is better than picking out the putty and sewing up the gaps again. Only this time, try the shade somewhere in an inconspicuous place so as not to step on the already tried rake. Even if you know how to choose the color of grout for the tiles and have chosen a shade for yourself, it would be a good idea to apply it to a separate element for control and wait for it to dry. This is especially true for all shades of blue: they change both during dilution and after setting.

How to choose grout for bathroom tiles: selection by color

When renovating your home, it is certainly better to leave all complex tasks in the hands of professionals. But there are also procedures that you can easily handle yourself. This will allow you to save money and establish yourself as a true jack of all trades.

And one of these procedures is the operation of caulking the seams between wall or floor tiles. Today we will talk about how to choose the color of grout for tiles.

Purpose of using the material

Of course, one cannot begin to directly examine suitable options, without understanding the main purpose of using grout.

As you know, tiles are used for renovations in the kitchen and bathroom. This material not only has an attractive appearance, but also in some cases with a claim to luxury, but also has very practical properties:

• Wear resistance;
• Protection against fungus;
• Resistance to humidity;
• Strength;
• Durability.

But, despite such qualities, the tiles have vulnerable spots - the joints where the slab is attached to the floor or wall. These small cracks are capable of accumulating moisture, allowing debris and microbes to pass under the slabs, which inevitably leads to deterioration of the material, its complete shedding or appearance of an ownerless state.

Therefore, the question arises about how to choose the right color for grout for tiles. After all, the properties of this material are obvious - it seals the seams between the plates, reliably protecting the product from moisture, mold and mildew.

Best choice for white tiles

The trend of using finishing materials is very popular. kitchen aprons and white bathrooms.

But when it comes to choosing a grout, a problem arises, because grout of the same color does not look the best against the background of a snow-white slab.

Therefore, in this situation, it is better to make a choice in favor of the following scales:

• Silver gray;
• Vanilla;
• Jasmine;
• Yellow;
• Mint;
• Jade.

What grout color should I choose for beige tiles?

If we talk about the niche of beige products, then they are perhaps most often used for fixing in kitchens. And due to the fact that interesting patterns and designs appear on the tiles, this has long become the standard of choice for most people.

When the tiles are already fixed on the walls or floor, and it comes to choosing a putty, you need to pay attention to the colors of the patterns directly on the product. Grout can be chosen in the same tone as their shades.

In addition, the following options are ideal for beige tones:

• Caramel;
• Apricot;
• Hazelnut;
• Ocher;
• Brown;
• Beige (one tone lighter or darker);
• White.

What grout color should I choose for brown tiles?

Brown shades for tiles in modern interiors of houses and apartments are also often used, but their scope extends not only to the bathroom and kitchen. Tiles of this shade fit perfectly into the interior of hallways and guest rooms.

The priority factor in choosing grout for such color shade is the selection of an option that is not too flashy. After all, for the kitchen, choosing a color to match the furniture - great option, for the bathroom, deciding to use putty in the color of the pattern depicted on the tile is an original solution, but for other rooms you need to think more rationally.

Here the grout should be used exclusively for its main practical purpose. Therefore, colors should be chosen from the following list:

• Sienna;
• Brown;
• Light and dark brown;
• Black;
• Graphite;
• Anthracite;
• Cocoa.

By choosing the perfect grout color, you can not only protect the walls and floors of your home, but also give them an even more refined and perfect look.

When carrying out facing work using tiles, a very important question is how to choose the right grout for ceramic tiles according to color. The holistic perception of the new surface and its decorative effect depends on how correct the choice turns out to be. What should you pay attention to?

Modern tile grout comes in a variety of colors

What is grout used for?

To ensure that choosing the optimal grout color for filling tile joints does not turn out to be a blind decision, you need to understand why grout in general is needed. Some aspects regarding the functional purpose of the grout will help you determine the direction of further searches and select the appropriate material.

Main functions of grout for joints:

• Protection against penetration of moisture and contamination. The mastic forms a barrier against water and prevents the destruction of the adhesive solution. It also prevents moisture from being absorbed into the wall, which reduces the risk of mold and mildew.
• Masking of defects. Chips and uneven joints can be masked using mastic selected to match the tile.
• Decorative. Creates an ideal picture and a feeling of completion when finishing any surface.
• Adding expressiveness to the interior. With the help of contrast, you can highlight the geometry of the picture and make the design of the room more rich and deep.
• Tying together various design details. Allows you to combine pieces of furniture and decor of different colors with wall and floor cladding, even when using contrasting tiles.

Grout for joints to match the tiles creates a feeling of completeness in the design of the room

Depending on what functions you need to perform, you can choose the most suitable option for you.

For the same tile, the filling may be different. It all depends on personal preferences and design intent. For example, in the question of which grout to choose for a standard white tile, there may be more than a dozen various options solutions.

Types of materials

To make the right choice of ceramic tile grout color, you should take into account not only the shade of the color in its composition, but also the properties of the components as a whole. To do this, it is worth considering in more detail the types of mixtures used.

White grout for black tiles

So, let's look at the types of grout mixtures:

• Cement-sand. It is a simple mixture of fine sifted sand and cement. To strengthen the ligament, you can use PVA glue. Used to fill wide joints.
• Alabaster. Mixed on a white alabaster base with water. Plastic and soft until hardened.
• Cement fugue with modifying additives. Sold in building materials stores. The mixture contains Portland cement and strengthening additives, which give the mass viscosity and plasticity. Has a wide color palette.
• Latex. A type of cement fugue with the addition of polymer components, which give the mass greater strength and water resistance.
• Epoxy. This is a special type of mastic, which is based on epoxy resins. They provide excellent strength and ideal protection against moisture. However, there are some difficulties in its application due to the high viscosity of the substance.
• Silicate. Transparent mass based on liquid glass. Used to fill even and clean joints, particularly for mosaics.

  May be transparent or contain particles of pigments and glitter.

• Furanic. Black grout, which has high performance resistance to chemicals, but is rarely used in everyday life.

Cement-sand - the simplest and least expensive grout for tiles

If you are using mosaic or want to create unique design, use clear and pearlescent mixtures. True, they cost much more than standard fugues.

Universal solutions

If you are one of the conservatives or simply doubt that you can choose a complex combination for finishing the seams between tiles, then you should choose universal solutions that have been tested over the years.

The most affordable and easiest way to disguise joints is to choose white grout. At the same time, it doesn’t matter which tile you choose, because colorless mastic matches any shade. In this case, you can either create a feeling of solidity of the coating, or, on the contrary, emphasize each individual tile.

White grout is the simplest and most versatile way to disguise joints

If there are no particular questions regarding what color mixture to grout white tiles, with other shades it may be more difficult to choose the appropriate material. For beige ceramic tiles, the classic combination is white, sand or cream grout. This choice is not only classic, but also optimal.

For other colored cladding, you can also use matching. So, for example, the choice of grout color for dark brown tiles can range from the same beige color to chocolate.

If you want to choose a more original option, you can use the services of a design consultant in some prestigious salons facing materials you can use this service.

Original design

Those who do not like boring combinations should focus their choice on more original and sometimes even extreme design options.

This includes the selection of combinations of materials that do not match in color even within the same palette.

If you select grout colors for white ceramic tiles, you don’t have to limit yourself to absolutely anything. However, keep in mind that the finishing of the seams should be at least minimally in harmony with the surrounding interior.

The same principle applies when selecting grout color for black ceramic tiles. Both materials belong to the achromatic range, and therefore go well with any other shades. White mastic, red, yellow and rich pearlescent look very original.

Color combinations of grout and tiles can be very different

But choosing a grout shade for the joints of ceramic tiles of a different color becomes a more difficult task. In this case, you need to be guided by color combinations in the natural environment. If you have taste, courage, and are not a stranger to experiments, try combining completely different tones.

What to consider when selecting grout

Before choosing a grout color, pay attention to all the nuances that may affect the choice of color, for example, a decorative insert on the tile. You can match it with contrasting seam designs.

Also take into account that mastic can be sold dry or in a ready-made consistency. After this mass has dried, the shade of the seams may change. Before you finalize your ceramic tile grout color, ask for samples of finished work using the materials you're interested in. If you follow these recommendations, you will be able to choose exactly the mixture that will make your interior unique and very attractive.

The final stage of covering the surface with tiles is grouting the joints; today we’ll talk about choosing the color of the grout between ceramic tiles. In practical terms, this prevents moisture from penetrating under the tiles and also creates a shock-absorbing effect. The second important aspect is the decorative function, thanks to which a pattern is created in a certain style.

It should be remembered that this final stage can best shape the composition, but it can also lead to negative results. The correct choice of fugue is quite difficult task, and the process of correct selection must be given special attention.

Optimal grout color

There are several criteria according to which you can plan the optimal choice of grout color. These include:

1. Accounting for tile type;
2. Taking into account where the tiles are located;
3. Expected Result.

As for the color of the grout, depending on the type of tile, in this case it is recommended to pay attention to mosaic, which is a very popular material for tiling kitchens and baths. In most cases, mosaic is represented by small tiles that have different shades, creating a specific pattern or an array of abstract shapes and figures.

A distinct and complete pattern is also often found and is a common option. Such diversity determines the difficulty and scrupulousness in selecting grout. When choosing a specific fugue color, a number of elements will appear much brighter, others may merge with the color of the grout, and in this situation, a violation of the integrity of the pattern itself is often observed. In the process of selecting contrasting color options, the appearance of the mosaic can become rough.

Mosaic grout

For the reasons listed above, grouts based on cyclic ethers (epoxides) are usually used for mosaics. Their tint can vary from golden to silver. There are also grouts that take on the color of the tiles they come into contact with.

It is very important to select the correct grout color depending on the location of the tile and its location. In considering this issue, it is useful to refer to the following example. To do this, just imagine that there are white or fairly light tiles laid on the floor.

When using light or white fugue, which has a cement base, when sealing seams, they will very quickly lose their attractiveness, and the penetration of dirt and clogging will have a detrimental effect. And in this situation, there is a number of competent decisions, each of which depends on the initial conditions.

Grout color stability

If price becomes the determining factor in your choice, then it is recommended to opt for gray cement-based grout. It will not lead to color change during the operational period.

If color is the priority factor, then it is advisable to select suitable shades. However, with this choice, the grout should not allow dirt and water to pass through. Often best choice become epoxy-based grouts. And this already goes against a modest budget - their cost is high.

As auxiliary option It is possible to highlight the use of cement-based grout: with the required shade and further treatment of the joints using a special impregnation, which will ensure that dirt and water are repelled.

As for choosing the color of the grout depending on the expected effect, in this case there are no difficulties. When it is necessary to achieve the effect of a complete coating, the grout is selected in accordance with the tone of the tile or is slightly lighter. This will ensure that the seams are invisible.

If it is necessary to highlight and emphasize each tile, the grout is selected a couple of shades darker than the base color that the coating itself has.

Choosing a contrasting grout color that is significantly different from the base color is a very experimental option. As well as the selection of various contrasting shades to divide the surface into zones.

Universal color

White grout is universal. Generally, it is suitable for most types of wall tiles. Therefore, before you rush to select different shades for grout, try using white grout in a limited area, you may like this solution.

Before application

If you decide to update or replace the grout, try to carefully remove the old grout from the tile joints, the better it will be this process, the better the final result will be. And yes, do this with extreme caution so as not to damage the tile edge, otherwise the question of re-gluing the tiles will arise.

So before you do final choice in favor of one or another grout, it is necessary to weigh all the advantages and disadvantages, to understand exactly how you want to see the final appearance of the interior as a result of the cladding. Recommendations from a designer or a specialist involved in tiling work will help remove any doubts.

Repair work on tiling a room involves resolving the issue of how to choose the color of grout for the tiles.

With the right choice, the design of the room will take on a different appearance, highlighting the finishing materials. To correctly determine the shade, you should pay attention to several nuances.

Purpose of the grout mixture

Grout is needed to fill the gaps in the space between the tiles. It not only adds elegance to the finish, but also has protective functions that prevent the appearance of harmful bacteria.

In order not to make a mistake when selecting, it is worth finding out what functions the mixture performs:

• Waterproof and dustproof. During the application process, the material forms an invisible film that prevents condensation and protects the tile adhesive from destruction. In addition, grout does not allow water to be absorbed, which prevents the appearance of fungus and mold.
• Decorative effect. Without the mixture, the tile finish will look unfinished. It gives the materials an additional shade.
• Ability to hide defects. Correctly selected shades of grout will help disguise chips and small flaws made when laying tiles.
• Expressiveness of the interior. Depending on how the mixture is used, you can highlight the finish, give it contrast, or diversify the design of the room.
• Creating interior integrity. If the shade is contrasting, you can combine various furniture or decorative items with it, combining them into a single style.

The grout mixture guarantees the durability of the designed room design. If this material is not used, over time the tiles may move away from the walls, creating new problems in the repair.

You can fill the seams of ceramic tiles yourself - no additional skills are required. Modern mixtures are available ready-made or in powder form, which is diluted with water to the required consistency.

Types of grout by composition

Modern manufacturers offer the following types of mixtures for filling the space between tiles:

1. cement;
2. cement-sand;
3. resin-based;
4. latex;
5. silicone.

Each of these varieties is suitable for certain case. For example, cement mixtures relevant for any type of tile, they have a homogeneous composition and are applied evenly. Their analogs with the addition of sand are intended for filling wide joints, however, the presence of an abrasive substance limits their use with glossy surfaces.

Grouts based on epoxy and furan resins are used only by professionals; they require qualified skills in the work. Their plus is the brightness of the color and excellent elasticity. Among the disadvantages is the increased cost of the material.

Detailed video about existing types grout composition and selection for a specific task

Epoxy grout is good for lining swimming pools, garages, and saunas due to its increased moisture resistance properties. A mixture based on furan resin should be selected when finishing industrial production facilities. Often in this area, colors from a standard palette are used.

Silicone mixture is considered the most optimal. It has a rich range of colors and is easy to apply to seams.

Latex grout is the most modern; its strength, moisture resistance and wide range of shades make it the most expensive. It is well suited for finishing balconies and loggias, as it is not afraid of temperature changes.

The principle of selecting a mixture by color

Before choosing grout for tiles, you should understand that this procedure does not necessarily have to be followed fashion trends. The main task in the selection is to express the interior and harmoniously combine the color of the tile with the mixture.

When going to a hardware store, you should take a sample of the tile with you in order to more accurately select the color of the grout.

You should listen to the advice of designers who suggest paying attention to some nuances when selecting:

The choice is also influenced by the structure and pattern on the tile: to shade the tile, you can use the black color of the mixture.

Grout color options

There are several types of popular combinations in interior design with tiles.

These should be considered to choose the appropriate option:

note

Choose the color of the mixture that will harmoniously combine not only with finishing materials, but also with furniture and plumbing. Do not overcrowd the room with dark colors - they will put pressure on the psychological state.

Selecting the current shade

Having studied the complete information on how to choose the right color of the grout mixture, it is worth drawing several main conclusions:
Video lesson on combining colors in the interior

A competent choice of material will help to visually expand the room, correctly place accents, and divide the space into zones. Over time, the grout mixture may change its color, so it will be necessary to periodically update the compositions. To do this, the old filling is removed from the seams, they are cleaned and a new compound is applied.