How to install a European picket fence. A fence made of Euro picket fence is a modern fencing for your site. Other materials for installing a European picket fence
As for the advantages metal picket fence(it is also called the “Euro picket fence”), the advertising is in many ways quite reasonable. Before understanding the nuances of constructing a fence from this product, you need to understand what it is.
By and large, these are metal strips that have protective layer from polymer compositions. There are no standards for their production, but the most common are samples with such linear parameters: length – from 150 to 300, width – 10 (cm).
Let's look at the main types of "Euro picket fence" that is used for erecting fences:
According to production technology:
- Cutting corrugated sheets ().
- Custom production samples by rolling in a mill.
For the end parts:
- Circumcised.
- Rolled (rounded).
By protective coloring:
- One-sided.
- Double-sided.
According to the material:
- "Galvanization".
- Copper (very high cost).
Now it will become clearer how to build a fence from a European picket fence with your own hands.
Selection of materials
Naturally, we will first of all talk about supports (pillars). Considering the aesthetic appeal of the “Euro picket fence”, it is advisable to choose metal blanks. Which ones to use? Most often, owners of plots for poles purchase a profile pipe (with a square cross-section) or.
The latter option is more convenient in that it eliminates the need to perform a significant amount of work. earthworks. Total cost Such a fence will be cheaper, since building materials (cement, crushed stone, ASG) will not be needed for concreting the buried parts of the supports.
As guides, you can use strip iron or a profile pipe of small cross-section. By the way, such lags are available for sale. Their length ranges from 2 to 12 m, so choosing the required quantity is easy.
Territory marking
The distance between the pillars is selected depending on their height and the general design of the site. The recommended interval between them is about 1.8 m. If it is increased, there is a risk that the fence will “play.”
Installation of supports
Simple work - the piles are screwed into the ground. If pipes are used, then holes are dug, after which the installed support is filled with solid fractions (crushed stone, broken brick or concrete), the entire mass is compacted and poured cement mortar. For gates and wickets, it is advisable to install “your own”, personal posts.
When using pipes, it is advisable to weld a metal plate to the bottom end. It will help fix the support more firmly in the ground.
In addition, you need to think about how to seal the upper ends of the pillars, otherwise water will begin to accumulate in them. Options - weld metal mugs, install plastic “plugs”.
Fastening the guides
The main ones are two; one on top, the other below (horizontally). If the fence is high enough, then a third metal strip should be laid in the center. It will serve as a stiffening rib, since the metal picket fence itself is small in thickness and is deformed under mechanical stress.
The guides are welded to the supports, so they are pre-aligned with a level or level. Another question is at what height to place them? Usually the lower one is attached about half a meter from the soil, and the upper one – 25 cm below the top cut of the fence. Although this is just an example, and the master carries out installation in accordance with the specifics of the work.
Before starting this stage, you should mark the guides and drill holes for attaching the fence slats.
Painting the frame
Considering that the fence is located under open air, it is better to use paints and varnishes with acrylic base. First, all the “iron” is degreased and treated with a primer. This ensures that the paint goes on smoothly and lasts a long time.
Installation of pickets
They are fixed with self-tapping screws. Considering their number, it is advisable to work. How the planks are placed around the perimeter is up to the owner to decide for himself. But here you need to take into account the height of the fence and what is located behind it. If there are beds, then it is advisable to make the gap between the pickets larger (it will cost about 1,150 rubles/m.p.). This will further increase the illumination of the surrounding area. Installation of a “blind” fence will require more metal strips, fastening elements and will lead to an increase in the cost of the structure (up to 1,900 rubles/m.p.). Therefore you need to choose best option, based on the specifics of the site.
Canopy gates and wickets
How to do this depends on the design. Fastening the hinges either with bolts or welding. If everything is done carefully, then such a fence will not even require cosmetic repairs 25 years, at least.
Helpful Tips:
- If financial capabilities allow, it makes sense to buy ready-made frames(joists + supports). All elements are fastened with bolts.
- To prevent damage to the protective layer of the strips by self-tapping screws during the process of fixing the pickets, plastic rings (gaskets) must be placed under the heads of the fastening elements. Moreover, only galvanized hardware is taken.
A common dilemma when arranging a site is the choice of material for a strong, beautiful and durable fence. Among the many options, the Euro picket fence deserves special attention, which is a worthy analogue wooden picket fence. A fence made from a European picket fence is characterized by increased strength, perfectly shades the surrounding area and, unlike a wooden picket fence, does not require special care and periodic painting.
Properties of Euro picket fence
The picket fence consists of metal strips of various profiles with a width of 40 to 120 mm and a length of 1.5-3 meters. High-quality cold-rolled galvanized steel is used in production. The metal thickness reaches 0.5 mm and has one- or two-sided painting with a thickness of 0.025 mm made of polymer material.
Externally, the Euro picket fence does not differ from the traditional wooden picket fence, but has increased strength, durability and has a large color palette. When choosing a European picket fence, you need to pay attention to the production technology, which is divided into three types:
1. Edge processing method:
- with rolled edge. The edges of the section are rolled, which gives the product strength and a more attractive appearance;
- without rolling. Sections are cheaper to produce and have a less neat appearance.
2. Manufacturing method:
- piece production. Each strip is passed through a rolling mill. This improves the quality of the product and also increases its cost;
- cutting from corrugated sheet. The slats are cut from profile sheets. The ends of the picket fence are not machined, which reduces their quality. This technology makes the picket fence as accessible as possible.
3. Painting method:
- one- or two-sided polymer painting;
- powder painting. Allows you to get an even layer of paint on both sides.
Color variety of Euro picket fence
The advantage of a European picket fence
Compared to its analogues, the European picket fence has the following advantages:
- high airflow, similar to a wooden picket fence;
- long service life (more than 50 years);
- fire resistance;
- high strength and rigidity;
- attractive appearance;
- simple installation technology;
- low weight. Facilitates transportation and installation;
- resistance to high humidity and direct sunlight.
Installing a Euro picket fence with your own hands
To install the fence you need following materials and tools:
- Intermediate pillars. Profile pipe square section with a wall thickness of at least 2 mm;
- Cross beams made of rectangular profile pipe. Based on 2 pcs. to arrange the distance between two pillars;
- Tool for excavating soil for pillars. Shovel, hand or motorized drill;
- Level, sledgehammer, drill, hardware, tape measure;
- Primer and paint to match the color of the picket fence;
- Crushed stone, sand, cement.
The installation of a fence is practically no different from other types of fencing, but has nuances at the stage of attaching the picket fence.
Before starting work, the territory is marked and the locations of the pillars are indicated. The recommended distance between posts is 1.5-2 m.
To install the pillars, you must first dig or drill a hole 50-60 cm deep. The pillar is leveled into the hole and additionally driven to a depth of 30-50 cm. Afterwards, the hole with the pillar is poured concrete mixture.
After the concrete has set, logs are welded or screwed to the pillars. The lower beam is attached at a distance of 30-50 cm from the ground level. The top one is 20-30 cm from the pole pole. The resulting frame is primed and painted in the color of the European picket fence.
The picket fence is attached strictly vertically to the frame using self-tapping screws. The recommended distance between slats is 2-5 cm.
There are two ways to attach a picket fence - regular and checkerboard.
Price of a European picket fence
Average cost linear meter picket fence is 0.8 - 1.5 dollars. Depending on the height of the fence, the width of the picket fence and the method of installation, the cost of the fence is calculated.
The technology for erecting barriers is the property of developers. There are no secrets, everything is accessible and open! installed the frame and assembled the filling from corrugated board or picket fence. However, any amateur activity when installing a fence is excluded. Deviations from step by step instructions will not bring pleasant moments in the future. Why not take advantage useful tips!
Euro picket fence photo
We owe the appearance of the euro picket fence on our territory to manufacturers and manufacturers of stainless steel products with a wide range of brands - the Belgian ArcelorMittal and German ThyssenKrupp companies. The adopted know-how of manufacturing lamellas from steel sheet served as an accelerator for the creation of a metal picket fence.
Euro metal picket fence is a product made of cold-rolled galvanized steel high quality– corrugated sheets, cut industrially into individual elements (lamellas) with polymer coating.
Assembled from Euro picket fence sectional fences compares favorably with existing structures, combining the strength of metal, durability of the structure and unpretentious maintenance. The metal picket fence has become in demand due to the unhindered movement of air in areas and its original appearance.
The cost of a European picket fence is acceptable for the purchase of lightweight slats and a structure made of galvanized steel with a polymer coating and increased rigidity. Let’s face it, many people assemble and install a fence made from Euro picket fences on their own.
Useful tips
The profile of the Euro picket fence is varied - from rectangular section to semicircular. The dimensions of the lamellas range in width from 80 to 128 mm.
If the European picket fence is still Terra Incognito for you, then this video comes in handy.
Types of Euro picket fence
There are single-sided or double-sided Euro picket fences. For one-sided fastening, the placement of slats or picket slats is single-row with a gap; double-sided fastening ensures a double-sided arrangement of slats in a checkerboard pattern. Let us tell you, Euro pickets (side A) and (side B) are used for traditional lining with a distance between the lamellas of up to 40 mm. For double-sided lining (“Blinds”) use sides A and B with offset installation of slats.
To install a European picket fence, it is recommended to prepare the frame and secure the pickets using a mounting clip on the posts.
Fence installation technology
In summary, the fence technology consists of the following stages:
- on the selected flat area, the future location of the support pillars is planned
- under the support pillars they dig or drill holes in the ground up to 800 mm deep
- the support pillars are installed, the holes are filled with concrete mixture, and masonry is organized for brick pillars
- Transverse logs are attached to the supports in the mounting clips, onto which picket fences are to be installed
- install the picket fence and secure it to horizontal logs
- to profile metal poles install a plug.
Using basic technology, you can install a fence in certain ways.
methods of constructing a metal fence
There are fundamentally different ways of constructing fences for picket fences:
- fence with metal posts
- fence with decorative brick posts
- metal picket fence on a strip foundation
- fence with brick pillars on a monolithic foundation.
Any method is possible for manual installation. Let us tell you what experts think budget option fence on metal posts.
Do-it-yourself European picket fence
Installation begins with the installation of supports, which can be installed in the following ways: driving or backfilling into a drilled hole and concreting.
Euro picket fence posts
Installation of support posts is considered a fundamental step in creating a fence. Possible installation options: *metal fence posts or brick ones.
Metal
For pillars they are widely used profile pipes section 60x60x2, 80x80x3 and 100x100x3 mm, as well as screw piles D76 and D89. In practice, preference is given to profile pipes with a cross-section of 80x80x3, capable of supporting the weight of the picket fence at maximum load.
To fasten the lamellas, use transverse frame logs from a profile pipe 40x40x2 or 50x25x2mm. The pillars are secured by driving and backfilling. The bottom of the hole for the post is strengthened, after installing the pipes it is covered with gravel and compacted. Each picket lamella is fastened with 4 self-tapping screws - 2 each for the upper and lower logs.
Useful tips
The choice of profile pipe cross-section as support pillars must be confirmed approximate calculation, the initial data of which are the parameters of the total length of the fence and the number of pillars. The number of required slats is calculated by dividing the length of the fence by the width of the slats, taking into account the width of the gap between the slats. For double-sided installation, the result obtained is doubled.
methods of fastening a metal picket fence
There are several ways to horizontally and vertical mounting metal picket fence: using welding and using special fastening systems and holders. Fastening X-brackets allow you to fasten the logs horizontally on vertically mounted support posts.
Step by step instructions
Step 1. Installation of load-bearing support pillars.
Step 2. Installation cross beams according to the calculated height and weight of the fence.
Step 3. Attaching the pickets individually
Step 4. Installing plugs on profile pipes.
Placing a metal Euro picket fence on metal poles is the most affordable way.
Useful tips for installing Euro picket fences are shown here.
The installation method on strip foundation, especially if they are involved brick pillars.
Brick
To install brick fence posts, it is necessary to erect formwork and a foundation under brickwork due to the solid weight of the entire structure. Tape monolithic foundation will allow you to erect fences up to 5 m high; with a well-chosen pattern of the euro-picket fence, the fence has a presentable appearance
Step by step instructions
Step 1. Marking the area for brick pillars
Step 2. Digging a trench with sand and crushed stone
Step 3. Laying reinforcement and installing support pillars, followed by pouring the foundation with concrete
Step 4: Tying each one support pillar brick
Step 5. Installation of fastening elements for transverse joists
Step 6. Piecewise fastening of picket fences.
The transverse joists for mounting the picket fence on brick pillars and the supporting profile are fastened to special brackets using dowels and self-tapping screws.
The construction of brick pillars for fencing is shown in the video.
Durable and beautiful fence It’s easy to install yourself, because it’s enough simple design. Owners of dachas and country houses often prefer to install a Euro picket fence with their own hands to fence their plots, which is not only durable, but also retains its attractive appearance for a long time.
Euro picket construction
The main stages of installing a European picket fence:
- Installation of support pillars;
- Creating a frame;
- Attaching pickets to the frame.
Preparatory work
Installing a European picket fence with your own hands will be successful if you first mark as accurately as possible the place where the fence is supposed to be installed and take accurate measurements to calculate the need for materials. The number of support pillars can be calculated by taking into account that there should be about 2.5 m between them. Dividing the length by this distance, we get required quantity. For support pillars, use a 60 by 60 mm profile pipe with a wall thickness of at least 2 mm. This thickness will provide the necessary strength during installation. To determine how long each post should be, you need to take into account how high the fence is planned to be installed - 1.5 m is usually left above ground level, but the height can reach 3 m. The depth should be at least 1.2 m.
Material consumption for a structure 10 meters long and 1.5 m high:
- Profile pipe - 30.8 m, including for support posts with dimensions 60 by 60 mm - 10.8 m, for crossbars with dimensions 40 by 20 mm - 20 m;
- Pickets 1.5 m long and 10 cm wide – 80 pcs.
Picket fence diagram
Pay attention! For support pillars, a profile pipe of 80 by 80 mm is often used, but it must be taken into account that this can unjustifiably increase the cost.
Installation of support pillars
Making a Euro picket fence with your own hands begins with the installation of support posts, for which the places where the support posts should be are determined and holes are drilled to a depth of 60 cm, into which a profile pipe 2.7 m long is installed and, having deepened it by 60 cm, it is driven in with a sledgehammer another 60 cm so that the total depth is 1.2 m. This method will ensure the stability of the column during seasonal changes in soil density.
Hammering the support post
If the soil in the area is not dense enough, then the pillar should be buried 1.4 m, which will increase the consumption of the profile pipe, and the buried section of the pipe should be concreted to ensure stability. If the soil density is normal, then it is enough to fill the hole with gravel.
Sealing the space around the post with gravel
Important! Before concreting a post or before compacting it with gravel, be sure to use building level you need to check how vertical the level is.
Leveling the post using a level
Creating a wireframe
You can make a Euro picket fence strong with your own hands if the frame is welded reliably. To do this, cross-bars from a 40 by 20 mm profile pipe are welded to the posts, 2 of which are taken for a fence 1.5 m high, with the top one welded at a distance of 15 cm from the top point of the support post, and the bottom 20 - 30 cm from the ground, depending on land relief on the site. At the same stage, the gate with a wicket and all the fittings are installed. After this, the entire frame is primed and painted.
Pay attention! If the fence is higher, then a third cross member is installed to prevent the effect of windage. That is why the first cross member, which is welded from above, is not welded too low.
Frame painting
All sections of profile pipes must be closed with plugs that will prevent water from getting inside. Therefore, it is important to select the plugs so that they are installed tightly and with force.
Installation of plugs for cutting profile pipes
Attaching pickets to the frame
A do-it-yourself metal Eurostalker can be made from sections of any width, but a distance must be left between them in order to ensure free air exchange, which is beneficial for animals. Each section of the Euro picket fence is attached to the crossbars with four self-tapping screws, and it is better to use self-tapping screws that match the color of the material.
Fastening sections to crossbars
To ensure that the sections of the Euro picket fence are at the same level, a cord is pulled across the top after installing the first section, and the remaining sections are aligned along it.
Pulling the cord
In order not to measure the distance every time, you need to prepare, for example, a piece of profile pipe or wooden block the right size(3 cm), and, when installing the adjacent section, measure the distance from the already fixed one.
Measuring the distance from the adjacent section
Pay attention! The distance between sections can be from 2 cm to 5 cm. It is not recommended to retreat more than 5 cm.
After all the sections are installed, a ridge strip is attached to the top of the fence, which gives it a more aesthetic appearance.
Installing a ridge strip
The best way to show you how to properly install a Euro picket fence with your own hands is a video that clearly shows the sequence of operations.
Features of installing a European picket fence
We must remember that each fence installation may have features that are caused not only by the terrain, soil conditions, but also by the specific materials and tools that each master uses, so the videos and instructions only give a general sequence of actions.
Several options for using materials and installing a fence:
- It is better to take Euro pickets with a rolled edge. In this case, everything will look more aesthetically pleasing;
- In order to isolate yourself from neighbors as much as possible, but not reduce air flow, install a fence with sections fastened in a checkerboard pattern. In this case, the distance between adjacent sections is about 8 cm, but no more. The peculiarity of such a fence is that it is completely permeable, and if you look at it from the side, the section is visible, although not clearly, and if you look directly, it seems solid, but for this effect you should use sections painted on both sides;
Installation of sections in a checkerboard pattern
A Euro picket fence installed on your own around the site using the proposed method will look no worse than the one installed by the craftsmen, because no complex measurements or actions will be required. The only condition that will significantly speed up and facilitate installation is the presence of one or more assistants.
Reading time ≈ 4 minutes
A fence made of metal picket fence is very relevant in our time, since it differs from other fences in that you don’t need to spend a lot of money on material and buy necessary tools. This fence has become relevant because it performs the function of protection (the construction of this fence is very easy, but penetration through it is not so easy, since the distance between the bars is close, there are sharp tips), decor, ease and duration of use.
Making a fence from a metal picket fence with your own hands will give you great pleasure, since you not only save money, but also feel great pleasure from the physical labor done.
To build a fence, you need to think about all the details: starting from the perimeter of the fenced area, its appearance, the amount of building materials and ending with the calculation of the duration of work.
Required Tools
To make it easier to understand how to build a metal picket fence with your own hands, you can look at the photos in our article or watch a video that will help in this useful and enjoyable activity. To build a fence you will not need many tools, but the necessary ones will be:
- tool for working with soil. You will need it in order to install posts to support the fence. You will also need a drill or a regular shovel (for digging holes);
- welding machine (for installing transverse lags to which the pickets will be attached). Welding will be the most the best option for this job (cheap, cheerful and reliable);
- screwdriver (needed when installing a metal picket fence for the frame). You can also get by with a screwdriver here, but this will give you unnecessary worries;
- an auxiliary small tool that all owners should have in their arsenal and will be necessary for installing a metal picket fence.
Materials
To install a metal picket fence with your own hands, you must be provided with the following materials:
- Pipe with a cross section of 60 x 60 mm (profiled). The design of this fence has a fairly low weight, so this section is quite suitable for you and can withstand wind loads.
- Profile pipe with a cross-section of 20 x 40 mm (needed for installing longitudinal logs, thanks to which metal pickets will be attached).
- Metal pickets (produced at enterprises from steel with a thickness of 0.5-2.0 mm). The metal is coated on top with a special layer that protects against corrosion, and then painted with powder paints.
- Galvanized self-tapping screws (for attaching metal pickets to the frame).
Instructions for installing a metal picket fence
When you have collected all the tools and materials, you can begin installing a metal picket fence:
- draw on paper a project for your future fence, since based on your drawings you will carry out the construction process;
- we install the frame (this is exactly why we need a shovel or drill). We dig holes, the depth of which is 1000-1500 mm (depth of soil freezing), in pre-marked places.
It is necessary to maintain a distance of about 2.5 meters between the pillars, as the structure will not be stable. It is advisable to make the holes for the posts in the corners deep (they carry a large load) and lay crushed stone and sand on the bottom. The length of the pillars must be calculated so that after you install them, the pickets are 100-150 mm higher. You should start the installation with the pillars in the corners and then fill the supports with a solution of cement, sand, crushed stone or simply ready-made concrete from a mixer. With the help of a beacon cord stretched along the entire length of the longitudinal logs, you take welding machine and weld profile pipes along the length of the frame. Prime the welding areas. Afterwards, paint the structure and proceed to final stage installation
