Making a picnic table with your own hands: step-by-step instructions. How to make a round or rectangular table from wood. We make a beautiful and strong country table with our own hands. The usual theme is a table with our own hands.
One of the mandatory attributes of human housing is a table. It should be in the apartment, and in the cottage, and summer house in the country.
Making a wooden table with your own hands is not as difficult a task as it seems at first glance. A simple design that is suitable for a summer house can be assembled by absolutely anyone, even if this is the first time they have picked up a carpenter’s tool.
More complex models, which will decorate the kitchen or living room, will require a creative approach and certain skills, but this work is also doable if you follow certain rules.
Possible options
Despite its simplicity, the table is considered a variable product and the right approach will fit organically into any room. Manufacturers wooden furniture Usually they offer the consumer the following types of models:
- with the correct geometry - rectangular, round, oval;
- corner - help save internal space;
- transformers – multifunctional structures;
- folding and sliding – allow you to accommodate a large number of guests;
- “books” are a common modification of a folding table.
It is noteworthy that all of the listed table options can be made in a home-made environment, literally from scrap materials.
Regardless of the design and shape, a homemade wooden table must satisfy two requirements. First, comply interior premises, if you do not follow this rule, even a beautifully decorated carved tabletop will look unpresentable. Secondly, the width of one seat must be at least 70 cm, otherwise people will experience discomfort.
Otherwise, the width and height are selected individually, depending on personal preferences and the intended use of the table.
Preparatory stage
Even simple rectangular table on four legs it is impossible to do without certain preparation. Let's figure out what's needed home handyman in the production process.
Blueprints
This is a mandatory condition that will allow you to visualize the future table and determine the size and amount of material. You can search for finished drawings on the Internet: many craftsmen willingly share the results of their work with Internet users, describing in detail each stage of production.
If we are talking about a unique table design that you plan to create according to your own design, you cannot do without a drawing. You can draw the future model with a simple pencil on a regular notebook sheet. It is recommended to pay special attention to the following points:
- external dimensions (length, width, height);
- attaching the legs to the tabletop. Round models usually have one support post located in the center; rectangular designs require 1 support for each corner;
- mechanisms (relevant for folding options and transforming tables).
It is necessary to carefully consider how all the parts of the table will be assembled together, what additional wood processing will be required before or after assembly.
Material
It's no secret that the tree different breeds has various properties and not the entire array is suitable for artisanal processing. Depending on the species, all wood can be divided into 3 groups.
Soft. This includes almost all coniferous species (spruce, pine, fir, cedar) and many deciduous species (linden, aspen, poplar, alder). This material is easy to process, but the finished table will require additional protective coating, especially if it is intended to be used outdoors. Coniferous wood is dependent on external factors and is prone to deformation and cracks. The exception, perhaps, is larch, which is used in construction wherever possible, including for making tables.
Solid. This group includes birch, oak, walnut and fruit trees: plum, pear, apple, apricot. Even without impregnation, such timber is resistant to a humid environment and exposure to direct sunlight, but during the processing process one cannot do without power tools.
Super durable. This category includes boxwood, acacia, hornbeam and yew. The material has high consumer properties, but requires professional processing, which is only possible in the workshops of industrial enterprises.
Tool
The simplest rough table made of boards can be assembled with your own hands using just a hammer, nails and a hacksaw. But for more accurate execution, additional tools will be required:
- electric jigsaw;
- sander;
- Screwdriver Set;
- drill with a set of drills of various diameters;
- roulette;
- simple pencil;
- square
In addition, it is recommended to pre-treat the wood with special antiseptics, which will make the finished product more durable and resistant to dampness. If you plan to cut a pattern on the legs or sides, you will need special cutters. A lathe or milling machine woodworking, but not everyone has such tools.
Homemade tables for the garden
The simplest and most practical option for arranging a summer cottage is a table made of wooden pallets. Unnecessary at first glance, pallets are a ready-made source material that requires virtually no additional processing, but offering multiple use cases. For example, from 2 pallets you can make a small hanging table with a wall mount, which can be used as a shelving unit or for small friendly gatherings.
This design is made in an elementary way. One pallet is attached to the wall using nails or self-tapping screws. The installation height is selected individually. The working part – the tabletop – is attached to the fixed base. The elements are connected to each other by two chains, which will perform a supporting and supporting function. For ease of use, 2 hinges are placed at the junction of the pallets; in addition, you can install a locking mechanism, for example a hook, which will hold such a table in the closed position.
A more complex option is a coffee table made of pallets, which will look natural on the veranda or terrace. In this case, the pallets are carefully disassembled into their component parts, sanded, and painted. After this, the boards are knocked together into a rectangular tabletop and fixed around the perimeter with vertically arranged elements. The function of the legs is performed by 4 square bars. This design can be made in 3-4 hours and is quite suitable for evening tea parties and family holidays.
We use leftover building materials
On almost any personal plot there are boards left over from the construction of a house or outbuildings. This material is quite suitable for creating a simple rectangular table that can be placed on the veranda or in the garage, used as a dining table or utility table.
Here you need to follow these instructions:
- we assemble the frame. To do this you will need 4 boards: 2 long and 2 short. The sides are fastened together with self-tapping screws, forming a regular rectangle. To preserve the geometry, we use a square. At the connection points you can put iron corners, which will give the structure rigidity and reliability;
- screw the legs. For these purposes, 4 boards or bars are suitable. The length is chosen arbitrarily: 80-100 cm. Support posts are installed with inside frame, fastened with nails or self-tapping screws;
- stiffening rib . An additional wooden crossbar is nailed approximately in the middle of the legs. A crossbar is installed on both sides, making the structure more durable and stable. In addition, these crossbars can later be used to install a shelf where you can place dishes or other small items necessary for the household;
- table top This is where the remaining boards go, which are best placed across the frame. The material is cut with a hacksaw to the width of the table and attached to the frame with finishing nails.
At the final stage, all surfaces are treated grinder, primed and varnished. You can paint the table, in which case the wood will last much longer. And if you go over the boards with a brush and apply stain on top, you will get an antique table.
Table with benches
This option is perfect for a garden; the wooden structure is installed permanently; depending on the chosen dimensions, it can comfortably accommodate 8-10 people. In production garden table and benches made of boards separately, then the elements are fastened together threaded connection: steel studs.
The manufacturing process begins with benches. To do this, the boards are cut to size according to the drawings. To assemble the bench you will need:
- 3 long boards that will go on the seat;
- 4 short pieces, cut at the edges at an angle of 45° - the length of these elements should not exceed the width of the seat;
- 4 boards 40-50 cm high - these will be the legs;
- 1 board is 25-30 cm shorter than the length of the seat - a stiffener.
note that all the listed elements are duplicated, since there are supposed to be 2 benches for such a table.
The benches are assembled according to this pattern. A longitudinal stiffener is attached to two short cross members. The legs are installed, which are clamped with the remaining segments. For reliability, short parts are drilled through and, together with the legs, secured with pins.
Seat boards are nailed to the top of the frame. There is no need to place them closely; it is better to leave small gaps.
The finished seats are connected to each other by four boards 160-180 cm long. The fastening is done at the bottom of the legs so that the support posts are clamped by the boards on both sides.
After preparing the base, the table is assembled. The tabletop and areas for mounting support posts are made according to a principle similar to benches. The legs themselves are made cross-shaped and fixed to the longitudinal supports that connect the benches to each other. The result is a comfortable DIY wood kitchen table that can be used for family gatherings.
Round tables
Despite the specific geometric shape, making a round table from wood with your own hands is not as difficult as it might seem at first glance. In particular, if in the yard multi-storey building or old trees are being felled next to your garden plot, you can get an original round tabletop without any extra effort. A tree cut made in the thickest part of the trunk is quite suitable for this. Such a round piece, 5-7 centimeters thick, is varnished and can become a table for keys installed in the hallway.
If you are unlucky with fallen trees, you can create a round tabletop on your own. To do this you will need 4 boards of the following sizes:
- length – 2000 mm;
- width – 250 mm;
- thickness – 40 mm.
The boards are tightly connected to each other (without fastening), and a circle of the required diameter is drawn on the surface. After this, the boards are cut with a jigsaw exactly along the intended line. A rectangular or triangular frame is assembled under the legs from bars. The shape is selected depending on the number of legs. If 3 support posts are assumed, the frame is made in the shape of a triangle. The elements are fastened together with self-tapping screws, the legs are fixed in a similar way. The tabletop is installed using corners; after assembly, the entire structure is varnished. If you make such a table carefully, you can install it in an apartment in the kitchen or living room.
An oval table is assembled using a similar principle. The only difference is that on the boards connected to each other, not a circle is drawn, but 2 semi-ovals at the ends. The boards are cut along the line with a jigsaw. The frame is also made of bars, but has a strictly rectangular shape. Ideally, the frame should be located at a distance of 10-20 cm from the edge of the tabletop. Small tables are often used as coffee tables and look especially interesting on curly legs. However, the manufacture of carved supports will require certain knowledge, so it is better to order such elements from a furniture manufacturer.
Transformable tables
A folding table made of wood, made by yourself and capable of changing its original shape, is a real masterpiece. Folding structures look equally advantageous in a country house and fit into the interior of a city apartment. The simplest option is to make a transformer for a personal plot, and you can easily cope with this task yourself.
To surprise guests and get comfortable table made of wood for a picnic, you need to assemble 2 benches with high backs. The seat is made of 3 boards connected to each other by crossbars. There is one nuance here: the edge of the crossbar, which is located on the back side, should protrude beyond the edges of the seat by 10-15 cm.
Table legs are made in different lengths. A short support post is placed on the side of the seat, the long one will serve as the basis for the backrest. Note that the recommended height of the backrest should vary between 60-90 cm. The design feature of the backrest is that it is mounted on one bolt, which is located in the upper part and serves as a turning mechanism. Closer to the seat, a hole is drilled in the rack where the lock for the backrest will be inserted.
After completing all the operations, you get 2 benches on which you can sit quite comfortably, discussing the latest news or admiring the sunset. If you lift the backs of these benches and move them closer to each other, you get a table with two rows seats. Taking into account the width of each backrest, a tabletop measuring 120-180 cm is obtained.
Computer desk
If we are talking about a factory product, a computer desk seems to be a rather complex design. It has a pull-out shelf for the keyboard, drawers for storing disks and other elements, the manufacture of which requires experience. However, the model of a table made of wood can be significantly simplified, leaving a minimum of parts necessary for working at a computer.
Here you can try this option:
- steel frame in the form of a welded rectangle made of corrugated pipe with 4 support posts. On one side, a frame is immediately made for a shelf where it will stand system unit, and two similar elements from the other end;
- the tabletop is made from boards or fiberboard sheets cut to size;
- the shelves are made of material similar to the tabletop.
All elements are connected to each other by a threaded connection or angle. Of course, this design is inferior to factory analogues in terms of external design, but it is several times cheaper and copes with its task.
Processing and external finishing
To homemade table made of wood had a presentable appearance and retained its properties for as long as possible; before assembly, all parts are impregnated with a water-polymer emulsion. It is better to repeat the treatment 2-3 times with an interval of 5 days. After installation is completed, the surfaces are thoroughly sanded, small flaws are masked with putty. Then apply varnish: it is better to choose compositions based on acrylic base, which are safe to work with.
To extend their service life, it is recommended to protect wooden tables from extreme wetness and direct sunlight. In a dacha garden, it is better to install them in a shaded place and cover them with film during rain.
A table is the second item after a stool that every beginning amateur furniture maker should be able to do. The table can be created from different materials and possess unique characteristics. An excellent intention for you would be the desire to make your own product from wood.
A table made of wood is quite easy to create with your own hands; having minimal skills in working with carpentry tools is enough. And the cost of the material will be significantly less than for a table using metal, glass or plastic.
A piece of furniture made with your own hands will most accurately correspond to the wishes of the happy owner, and will be incomparably more pleasing to the eye than what was purchased. And most importantly, when creating a table with your own hands, you acquire important skills in working with the material, which will make the restoration of operational defects much easier.
What can you make a good table from?
A particularly beautiful tabletop can be made from cheap, non-grade pine boards, knotty and twisted (without falling knots, rot, fungus, wormholes), which, when well processed, give a wonderful pattern, to achieve which when working with expensive wood, much more expense and effort is required .
When choosing a material, it is important to take care of the strength of the future product. To do this, you should pay attention to the density of the wood.
Soft wood (spruce, pine, chestnut, dogwood) is easily damaged during use, which negatively affects the durability of the table. But scratches and dents can be hidden, although the restoration process will be quite frequent.
Hardwoods (beech, ash, maple, oak, walnut, fruit trees, elm) are quite difficult to process on your own. And you may have to look for experts to work with them. But you will ensure the durability of the product.
External characteristics
It is very important to determine in advance the appearance of your future product. Basic rule good table it is considered if the design fits well into the space allocated for it and leaves a lot of free space for those sitting.
It is also important to consider that a table with a rectangular top will accommodate less people than a table with a round or oval shape with the same area. And it would be more expedient to make a table for guests in a folding version, which is folded out for big holidays, but in everyday life is folded. Also, such a folding table will be convenient in the utility room.
Most often you need to choose a kitchen table. It should be roomy and pleasing to the eye to facilitate the process of working with it. But it should not interfere with movement in the room and in no way interfere with the process of culinary creativity.
Based on this, it is absolutely clear that the size of the table is selected depending on the area of the room. Also, soft wood cannot be used for a kitchen table due to its use in “extreme” conditions.
Choosing the external characteristics of a product is a responsible process, therefore, before starting to personally create a table for a summer house, it is extremely necessary to thoughtfully assess the needs for which this table is being made.
Transferring an idea to paper
When creating a design that is the fruit of your imagination, you will have to develop the diagram and drawings of your table yourself. Why are there so many electronic programs?
After a thorough development process, it is extremely important to transfer the resulting result to paper. For quick and quality work It is very important to use this manual regularly.
Creative process
Preparation of drawings is the last preparatory stage. Next, you can begin the most important part of the work - manufacturing the parts. Do-it-yourself wooden tables are much easier to create if the drawings and diagrams are as informative as possible. This reduces the likelihood of errors to a minimum.
You can personally make a desk, a coffee table or a children’s table. With some skill, it is possible to create a computer desk. And also lunch or country model. Each of the options is quite easy to implement.
The canvas for the table top and the boards with beams from which the remaining parts will be formed are processed with the available tool or, at worst, with coarse sandpaper to remove any defects present in the form of unevenness and protruding knots.
The boards are sanded on all sides, including the side edges and corners. If you are creating a canvas from wood cuts, you need to make sure that they are sufficiently dry, and also repair small cracks discovered after a visual inspection. And it’s better to tongue and groove them. To get more reliable adhesion of the canvas and save time on assembling elements.
Transfer the diagram to the finished canvas. The main elements are cut out with a jigsaw and, if necessary, the sections are polished. Protruding support elements are cut off by approximately 3 centimeters. Horizontal cuts are made on both sides of the supports (legs).
The blanks are coated with a preparation that prevents the entry of moisture and pests, and only after final drying is it possible to resume the process of creating a table with your own hands.
Putting the details together
After making all the necessary parts, you can begin the sacred ceremony. Namely, to put together the desired masterpiece. And this can be either a round table or some other selected product.
First you need to collect supporting structure using screws and glue (first, thin channels are drilled with a drill to the length of the screw, otherwise there is a possibility of the part splitting). Galvanized screws can be used for connections, as they do not rust, and this is very important for wood products. Or wood glue.
According to the basic rules, the length and width of the frame should be 30-25 cm less than the tabletop.
Additional boards need to be attached to the sides to add rigidity and to hide the place where the legs are attached. Cut chamfers where the legs are installed.
Then the table leg is secured in place with clamps, and holes for the bolts are drilled in the frame. Place the supporting elements in place and secure them with stoppers. Reinforce the structure with wood glue. Then install the tabletop in place for which furniture corners are used. At the very end, all visible screws are hidden with plugs matching the color of the wood.
The final stage. Finishing
A photo of the completed table can be seen below. Achieving this result is surprisingly easy. If desired, you can round either only the corners or the entire end, depending on the type of table. It will be nice to make chamfers on the edges of the tabletop.
Irregularities in the entire structure are sanded down, and mistakes made are hidden using putty. To extend service life with your own hands assembled table it is necessary to cover it with several layers of varnish or stain.
Thus, making a beautiful wooden table with your own hands is a fairly simple leisure activity. And easy to do. The guarantee of obtaining a high-quality, ideal in dimensions and aesthetic result according to your drawings is: strict adherence to the instructions, error-free execution and carefully selected material. And the resulting table will harmoniously fit into the exterior.
Photos of tables with your own hands
Just like in a bedroom without a bed, and in almost any other room, be it a living room, kitchen or even a hallway, you cannot do without a table. Actually, it won’t be superfluous in the bedroom either. It’s better to have several of them at once - for different purposes. So that there is somewhere to put a night lamp, where to lay out notes and books, install a laptop, or even just have a snack or even do something more piquant.
It’s not difficult to buy a “desk”, there is a wide choice now, but making it yourself is a matter of special sophistication. Such a homemade item of apartment “wardrobe” will be valued much more highly by both the owner and guests, and it will be more pleasant to use.
This is not an easy task, but it is also not difficult, requiring, however, a certain aesthetic taste and carpentry skills. But don’t be scared and retreat right away. It is quite possible to cope with this task, the main thing is to imagine what you want.
Advantages and disadvantages
A homemade product has both its advantages and disadvantages. Among the advantages:
- Variability. You can do what you really need with your own hands. In all aspects. This includes complete freedom in choosing shape, material, texture, size, and design.
- Saving. Buying furniture in stores will cost significantly more. In fact, for the same or even worse quality you will sometimes have to pay many times more money.
- Uniqueness. What you do with your own hands, no one else can do. This will allow you to create a stylish and original, and most importantly, unique interior almost anywhere - in the country, in an apartment, in your own home.
- Improving skills. Working on a table is an opportunity to practice your metalworking and carpentry skills and learn a whole range of new things. These skills will also be useful when repairing ready-made store-bought products in the future.
Having better understood the design of tables, it will be possible to take a more professional approach to the selection of such products in retail outlets, or even even discover a source of additional income. And in general, you can always help your loved ones and friends fix something, bring a fresh idea to the design.
However, making tables yourself is fraught with certain difficulties. Among them:
- Time-consuming. Be prepared to spend one or more days, or even a week for a large item. The maximum, as experts admit, is 10 days spent on big table. In fact, you can spend your entire vacation toiling with the material and achieving very meager results. Therefore, it is better to be psychologically prepared for difficulties during the first experience.
- Injury hazard. Working, especially with wood, is fraught with splinters. When working with old material (beams, fence boards), you need to remain extremely careful. But in some cases, even work gloves may not save you from small cuts. Too delicate hands should not do such things.
- Manufacturing defects. A house is still not a workshop, and some calculations can be difficult to make - hence the roughness and unevenness in a seemingly finished product, verified to the smallest detail. It’s fine if the table is made for a summer house, but in a standardized room the result can become the subject of offensive jokes and just look out of place. For the manufacture of an improvised “bureau” or other more complex than regular table, designs still require skills and certain experience. There would be time to work it out.
- Need a tool. If you don’t have it, everything is simple – you’ll have to buy it and master it. Time is already money, but there are also additional costs at the first stage. However, in the long term, such an approach will lead to savings - the next table will be made for next to nothing, especially if there are supplies of material at the dacha.
- Not suitable for all styles. You need to be careful when experimenting with homemade products. modern interiors, for example, high-tech, where metal and technological materials rule the roost. Working with them is difficult, and wooden crafts can disrupt the harmony of the room.
A little advice. If you decide to make a table, and this is your first experience, try to find a good adviser who will psychologically and with the help of his skills support the endeavor. You can take the first steps together, and then set off on a free “flight”.
Assembly Features
There are many types of tables. The most common are desk, computer, toilet (with or without a mirror). Desktops vary depending on whether they are designed for a laptop or made for a desktop computer. In the latter case you will need special space for the system unit - it can be installed both under your feet and at eye level.
Each option has its own advantages that affect the design of the table. In the first case, the system unit will not get in the way, but it will not be very convenient to connect USB ports to it from behind. When designing, you should leave a significant open space behind the table, and do not place it near the wall. If the system unit is located on top, the bureau should be as stable as possible, and the table top should be made of durable, reliable material.
If there is a goal to design a desktop for a schoolchild, including a collapsible structure, it is reasonable to build into it drawers for notebooks, textbooks and CDs. An alternative is a separate shelf above the structure. The drawers can be either retractable or an open shelf. Backlighting is also relevant.
Tables can also be corner or transformable; height-adjustable, collapsible, on wheels.
All these are not frills, but practical design elements. Among the more complex options, popular ones include, for example, river tables with a beautiful, often transparent material built into the middle part. Their production will take more time and require higher metalworking skills, but will allow you not only to improve your working “skills”, but also to make a real interior artifact. Each type of table has its own assembly features and specifics. Let's look at some of the most popular, simple and available options creating a table that does not require the heights of technical training, but allows you to create high-quality and interesting products that do not look awkward or poor even in a modest interior.
Tools
But before you start carpentry, you need to decide what and with what you plan to work. You need to get down to business in full “instrumental” readiness. Don’t be afraid, you won’t need anything rare or particularly complicated - just the usual working arsenal, which a real man always has at hand. So, let's list the main things. You can’t do without the “classics of the genre” - nails, screws, a screwdriver, a plane, a hammer, glue (instant glue will come in handy), a knife. In some cases, you can use a saw (in nature). Don't forget about work gloves and disinfectants. Be sure to have iodine and cotton swabs with you, unless, of course, the goal is to make a table and not get sick with tetanus.
The fact is that wood, when sanded (with sandpaper or another device), can turn out to be very “unfriendly” and simply become a pile. When working with metal, you also need metalworking tools. And in any case, it is better to acquire eye protection - a special working mask. For subsequent processing of the material and its cleaning, a brush and disinfectants, including against insects, especially when using old wood. You can also clean the table with sandpaper.
And, of course, you need varnish or paint for final processing. You may have to treat the tabletop with varnish several times (after the first one, the lint will simply stand up), which means it is better to buy it with a reserve.
Popular materials
One tool is obviously not enough. There is something, but nothing to work on yet. The main thing is, of course, the material. Theoretically, a table can be made from anything, but there are some subtleties. The most popular is wood, but it must be dry! If it is not dry, dry it; This will take time, but it is better not to rush anywhere for the sake of the quality of the product.
A table made of dry wood, logs, timber is a wonderful and reliable element of the interior. Beautiful, functional and inexpensive. With this option, you can save a lot if you have inexpensive bars or logs on hand - stored, for example, in the country. In stores, good wooden tables are definitely not among the cheapest.
Wood is in trend now. This is the main eco-material. You can’t do without it in interiors tailored to a natural style. In fact, it is wood in one form or another that is used in all classical interior styles, right up to colonial or modern.
You can also make a bureau from chipboard. The material is composite and quite affordable. But it has a lot of disadvantages. Chipboard is afraid of moisture - no longer an option for the kitchen. It doesn't hold nails and screws well - adding extra complications to the job. And in general, it is not very environmentally safe - it is better not to keep too many chipboard products in the apartment. However, such a table can be placed, for example, in a house or on the veranda at the dacha - as an inexpensive, temporary option - for the season, for receiving guests. Inexpensive, simple and moderately aesthetically pleasing, and most importantly – functional.
Let us clarify that laminated chipboard is also available on sale - also wood and shavings, only laminated in a special way - with a polymer film at high temperatures, or even with a special varnish that provides increased water resistance. Laminated chipboard is more expensive, but such boards are practically devoid of all the disadvantages of chipboard.
However, using plywood will be no less practical. There are many types of it - there are also moisture resistant ones. This means the range of applications is wider. In Russia, this material is gaining popularity and is also being exported en masse, which indirectly speaks about its quality. Plywood is quite easy to process and not too expensive. The downsides are its facelessness, dull texture and the accompanying feeling of unnaturalness. In addition, when working with plywood, you must be very careful in the preparatory stage. You can’t do without a sketch or drawing. You can use ready-made projects or make it yourself.
The easiest way is to make a table from furniture board, for example, ash. This is a little more expensive, but at the same time it will ensure the reliability of the main part of the table - the table top. Less hassle with polishing, but at the same time somewhat less naturalness and texture.
An extreme alternative is to use natural wood: stumps (they, by the way, can be used on their own, but this is designer chic) or saw cuts. With them everything is exactly the opposite. You will have to sand it and varnish it yourself several times, but in the end you will get a completely unique unique product that all lovers of “natural” design will be able to appreciate, if, of course, after the get-togethers they leave without a few splinters in various places.
Often, glass or special optical glue, plexiglass adhesive, which replaces it, is used in table decoration. You can also buy just impact-resistant glass - although it will be more expensive. It's stylish, impressive and safe. This material is optimal for small oval coffee tables, but Lately It is increasingly used by designers in models with right angles.
We also add that the legs and base can be metal. You should not be afraid of the combination of wood and metal - with proper design it can be not only harmonious, but also very interesting. In modern interiors, lofts and high-tech, sometimes you can’t do without it. In addition, metal combines effectively with glass or its analogues.
Kitchen table
This is absolutely necessary element interior It should be convenient, comfortable and stable. The surface of the tabletop is often of no fundamental importance - it is usually covered with a tablecloth or oilcloth. At self-production It is important to pay attention to the lower parts of the structure so that you can sit at the table without any problems and always have the opportunity to comfortably place your legs.
You can make a good dining table with your own hands in just a few days. According to home “masters”, even very beautiful large models it took them no more than 7-10 days. You can use any material - the easiest ones to work with are chipboard, plywood and wood. The main thing is that the beams and boards are smooth and well polished.
Carefully study their dimensions and, if necessary, bring them up to standard - it is hardly advisable to make a kitchen table more than 80 cm in height. The shape and size of the countertop will depend on the interior and the availability of free space in the kitchen.
The table, though main element interior in such a room should not take up all the space. Therefore, especially in small kitchens, it is practical to make it square - you can approach from all sides, and more four people It’s unlikely to fit behind him anyway. In large dining rooms, on the contrary, it is better to stick to the classic rectangular format.
Oval or round table top it will also look interesting, especially if you choose beautiful curly legs for it - this, however, will require good carpentry skills.
When working on a standard wooden model Attach beams or boards using strips at the bottom under the tabletop. A practical option with plywood. It is better not to use chipboard - there is always high humidity in the kitchen, and something is accidentally spilled on a regular basis, and this material, as we know, does not withstand the influence of the water elements well.
Interesting idea will create an extendable table. In this case, the fastenings must be flexible. But you can do it easier. Do it yourself anyway extendable table in the format of one design is a non-trivial task.
Therefore, make two small rectangular products of the same dimensions. During the day, they can be moved to different parts of the kitchen or even apartment, and before eating together, they can be moved, thereby forming a large table. A very practical option for small kitchens. When making, pay attention to the lower parts - partitions and beams should not interfere with each other when connecting tables.
If the kitchen is very small, you can also make a folding table. Assemble the tabletop and attach a special bracket to the wall. Such a “bureau”, as a rule, has only two legs, which means they should be placed so that at least three people can fit behind it at the same time. Another option is to build a small cabinet for storing dishes and food instead of one of the legs. This is an ideal way to save space.
When designing a table with a sink, it is better to seek the help of a professional. It will not be difficult to make sketches and the main elements of the structure, but the main thing is that they do not interfere with the pipes being laid under it. So you can’t do without a locksmith and a plumber.
At the final stage, it is better to process any table. How to cover it and how to decorate it is a matter of taste. You can varnish and cover it with a tablecloth, or even decorate it with special tiles or even stone. The field for experiments is large.
Many color palettes, including bright ones, will fit into the kitchen interior. Don’t be afraid to make the table red, yellow or green - it’s fashionable, pleasant and aesthetically pleasing, and will create a good mood when preparing, eating and communicating with family members and guests.
And one more tip on kitchen tables. If you want to design a product with drawer, make the design of the latter as reliable and airtight as possible so that moisture does not get in there. Assemble it from several boards or slats and securely fasten them with special glue or nails. When using plywood, it should ideally not be thicker than 20mm.
High-quality grinding and processing, including against insects, is important. Remember that the kitchen, as a place for storing food and preparing food, is a favorite environment not only for cockroaches, but also for various arboreal and moisture-loving species of insects, especially in hot climates.
For computer
A computer table should be compact and functional. It's always better to design it with reserve. There are two main concepts:
- Desk for a desktop computer. If the equipment is powerful, say, gaming, you will have to make the table long and wide enough. The monitor will take up a lot of space on it. A diagonal of 20 inches and wide screen rotation capabilities mean the user is mobile at the table, which means there should always be a place to put your hands. A separate measurement should be made taking into account the size of the keyboard.
The table should also accommodate other devices - a mouse, joysticks, gamepads, or even a gaming role. The system unit will also take up part of the space. It can be installed at the bottom of the table - for this you will have to make special ceilings so as not to place the equipment on the floor. The table should not be closed - high-quality cooling is very important for a powerful computer, and open space will provide the necessary air circulation.
At the same time, the design of the table is not of fundamental importance - in any case, it will be filled with equipment. The main thing is to use high-quality varnish and paint so that the surface is smooth, easy to wipe and does not accumulate a lot of dust, which is dangerous for equipment.
- For laptop. When measuring, keep in mind that it must fit both the computer itself and the hands of the person working or playing at it. Often a full-fledged keyboard is also connected separately to laptop computers, so it is better to use spare material. Leave room for the mouse too.
Let us add that the shape of a computer desk can be made to almost any shape. Previously, there was an opinion that it should be rectangular, but practical experience showed that oval tables, in particular for laptops, are very interesting solution. If you attach wheels to them, turning them into an analogue of a coffee table, you can easily move with your computer throughout the room - show videos to friends from convenient angles or, conversely, if necessary, quickly and efficiently immerse yourself in work or correspondence away from prying eyes.
However, a table with right angles has some specific advantages. It is easier to equip it with drawers and shelves for storing books and discs. Do not forget about the reliability of fastening these structures, since the weight of a music or game collection can reach 7-10 kg.
Night table
It is better to make the night table extremely compact. Size is not his strong point, the main thing is convenience of shape. First of all, adjust the dimensions of the materials to the height of the bed. It’s better to make it level with the level of the mattress, but it’s okay if it’s lower. A high bedside table is not too impractical, although it is seen as an example in some design schools. If aesthetic qualities are more important to you, it is reasonable to experiment in this direction. In this case, you can choose any shape - from oval to rectangular and square.
The design concept should be included in the composition of the bedroom interior. For classic styles The best material to choose is wood. Moreover, in the case of retro and historical styles The more authentic it is, the better. If you have skills in artistic carving, then in this case it’s time to use them. In modern interiors, a wooden product will also be relevant - the texture, if necessary, will be hidden under varnish, paint or tablecloth. The color scheme depends on the color of the room. The color should be in harmony with the bed, bedding, and ideally with the floor and ceiling. Radical contrasts are inappropriate here.
When working on a night table, special attention should be paid to its stability. The leg can be made big. If there are several of them, they should turn out absolutely identical. Please note that they not only place an alarm clock or a coffee table book on the night table, but sometimes rest it with their hands - it should be able to withstand such loads without any problems. The table can also be equipped with several drawers, or, if the level of technical skill or specific material does not allow, with an open shelf.
Coffee table
In many houses and apartments, the habit of laying out newspapers and magazines on the coffee table has already become a thing of the past. They have been replaced by new means of communication - various gadgets - from iPhone to laptop. But they also need to be placed somewhere, even if you just put them on charge. Before making such an interior item, it is better to immediately determine its functionality.
The main thing is to understand one simple truth: no one works behind magazine “bureaus” - at best they work part-time, so they should be low, aesthetic and comfortable for a relaxed pastime. And it is aesthetics that comes first. Your guests will remember, first of all, the design and material of the table. Another point is functionality. It would be good if such a table had space under the tabletop where you could put something.
So, it is better to take chipboard or boards as materials. They should be assembled on dowels with extreme, maximum precision - so that the joints of the elements are not visible.
An additional cross member will make the table more stable and reliable. If the structure contains metal (legs), you will need welding machine. You can put a rectangular one in the base metal element. Don't forget to reinforce the sides in the same way. A very common option is glass (or transparent glue). Such tables are often found in offices, waiting rooms and other “guest” facilities. However, as the experience of many designers shows, it fits well into home interiors.
When making it, it is important to pay attention to the wooden or metal base - it will be visible under the glass! Cross-shaped shapes work well. Don't forget that glass can also be used simply as an additional component. For example, cover part of a classic wooden table with it. It is advisable to equip the resulting already light interior object with wheels. Such a “mini-transport” will be especially relevant in a large living room, as well as in an apartment where there are always a lot of children (then, however, you should not experiment with glass again). This is a good and useful item for fun and relaxation.
But the mobile table should be light. Massive - it is better not to equip it with this “bonus”, but to make it from durable, heavy dimensional boards. It will ground the interior and make it more collected.
There is also an option with a transforming table. It is practical, but not always aesthetic. However, if you make a double (in height) base, then it can even be used as a conditional easel. Let us add that coffee tables, as a rule, are still small and are usually designed for one, maximum, four people. The selection of sizes is purely individual. The only thing that matters is the height - it can be varied from 40 to 60-80 cm. Do not forget also that in some situations the product can also be used as a bookshelf– for this you will need to make shelves and compartments that meet your needs.
In terms of color, contrast between the tabletop and legs is acceptable. The combination of metal and wood looks good. You can apply a drawing or make an unusual ornament on the surface, but it’s easier to just cover it with something - you won’t have to repaint the products every time your mood and taste change. And one more thing about the form. Magazine furniture can be either round or rectangular-square - a matter of taste. Round products are used somewhat more often because they are safer and more affordable.
The knights of King Arthur, after all, also sat at the round table, so in the living room, a place for receiving and gathering guests, each of whom often wants to show their individuality and initiative, it is better to do without seats at the head of the table and other patriarchal delights, and even for Children are safer - they won’t get hit again.
Garden furniture
A holiday in nature is a wonderful pastime, however, in order to really have a good rest and sit in company, you need a high-quality and comfortable table. This type of furniture is very specific. On the one hand, it must withstand high humidity - if it is standing outdoors in the rain, on the other - it is very unpretentious in terms of aesthetic qualities and always gravitates towards naturalness. In nature, a glass table or an expensive metal product would be inappropriate.
So, before you start making such furniture, you need to decide on an important point: where it will stand and how mobile it should be. There are essentially two options:
- Fixed outdoor table. Typically, such structures are placed near the garden house or at a distance from it. comfortable places for relaxation - under an apple tree or other fruit tree. The main thing is that such an exterior item should be durable and reliable, standing on its “legs” as firmly as possible. In some cases, it is reasonable to even dig the legs into the ground. The surface can be any, but preferably wood.
The main thing is to remove lint and shavings from it, as they can lead to unpleasant and deep injuries or just splinters. Please note that the surface must be moisture resistant - the table will regularly get wet in the rain. In cases of heavy rainfall or simply a long absence from the dacha, it is better to cover it with something, say, oilcloth. This won't save you from high humidity, but will protect from direct contact with water.
- Movable table in a country house. Typically it is more compact version. It can be used indoors, taken out onto the veranda or open air. When making it yourself, it is better to focus on using lightweight materials so that it can be transported.
Wheels are unlikely to help much (the landscape at the dacha is not always level), although they can also be attached, but this will make the structure less stable. A good bonus will be the ability to extend or assemble the table. For the winter season, such a table can be completely folded and stored in the attic so that it does not deteriorate.
What is the best material to make a garden table from? Pallets, boards, old logs, say, from an already unnecessary or dilapidated fence, partitions from boxes, an old tire, or whatever may come in handy. It is better not to use glass and not to abuse metal. The latter tends to rust: this is not so terrible, but aesthetically it can ruin the entire natural harmony, unless, of course, there is a desire to create a post-apocalyptic ambiance.
It is better to fasten boards for tabletops in the countryside from below using planks. There is another option with gluing - this is a more time-consuming technology; after processing, you will need to pull the boards together and keep them in this state for about a day. If the material is old, it is better to arrange it according to color, align it stylistically according to color.
Light - to light, dark - to dark, with interweaving color contrasts closer to the center. Don't strive for perfection with constant alignments - naturalness should not be symmetrical. The next step is to sand the surface. It is better to do this with sandpaper.
When working with legs, the main thing is to make them the same length - otherwise eating at such a table will not be pleasant. It is important that their surfaces are not beveled, but smooth. However, if you dig your legs into the ground and don’t have a saw at hand, you can always compensate for a couple of centimeters, but only as a last resort.
Then, after designing the structure, the tabletop needs to be varnished. After the first time, lint will probably stand up, so we process it twice. For reliability, an additional support-mount can be made in the lower part at the final stage. It will make the structure more stable and allow you to position your legs comfortably.
To continue the work, you can also attach benches to the table - making them part of a single structure. It is better to connect the bench to the table with special wooden planks using nails or long pins. For reliability, you will also need washers and nuts. The seats themselves are made according to a similar principle, only their height, naturally, is lower than the table, and the fastenings should be even more reliable - it is better to make cross-shaped ones.
Final stage– painting. Gray, brown, natural tones look good. Bright colors look too eclectic unless you have a modern design country house, and instead of trees there is artificial vegetation.
And a few more words about sizes. As a rule, country tables are long, but not too wide - this makes it easier and more convenient to approach them. Do not install them too close to bushes, especially thorny ones, gooseberries or cherries; approaching them will be painful.
The distance from the fruit trees must also be reasonable, otherwise Newton’s experiment can be repeated, but it will fail. The height of country tables, as a rule, is medium, since both adults and children usually sit at them. So, with built-in seats, it is better not to over-inflate the design.
How to organize lighting
This question is relevant both for small night tables and for work products on which a computer is installed. You can put a small floor lamp on the night “bureau”; it is reasonable to extend the wire with the switch to the bed, so that every time you do not reach for the table and do not drop the lamp in the dark. On the desktop it is also reasonable to use table lamp, but since we are experimenting with homemade structures, other more interesting opportunities appear.
If you make a small “superstructure” over the table from several panels - plywood and chipboard, securely attaching them with nails, then under them you can install a regular light bulb, or better yet, an LED. It will be more effective to use two or three small point LEDs. They will provide high-quality and uniform lighting.
A child who studies at a table, and an adult while working, will be able to read at any time without any problems. To work at a computer (so that the light does not shade the screen), it will be possible to turn on only one point of lighting, which can reasonably be placed a little to the side - it will become a source of dim light.
Among modern design concepts, there are also options for lighting tables from below, through the structure of the tabletop, but you can cope with such a difficult task on your own “ terms of reference“It will be problematic without a qualified electrician, and the practical benefits of such structures leave much to be desired.
The choice of light temperature for almost any table design is purely individual and depends rather on the place of use. In classic small bedrooms, warm color combinations will be relevant.
On the contrary, cool shades will fit more harmoniously into the kitchen interior. A lot depends on the style. High-tech, for example, is often designed specifically for cool colors. Accents in classics, colonial style and some loft variations, on the contrary, are better placed on the warm segment.
Forms
The table can be made absolutely anything, completely carved, but the design has already developed several classic and practical shape ideas. Among them:
- Rectangular. These tables were popular in almost all historical eras. In Russia, boyars gathered behind them, they served as a place for peasants to eat in huts and the basis of tavern life.
In Soviet times, they were slightly replaced by other forms - square, designed to minimize the living space as such. Nowadays, rectangular tables are no longer associated with the ideas of dominance and patriarchy, but have retained their immanent massiveness and hardness. More often used in large rooms. Suitable for a cottage, living room, spacious kitchen.
- Square. Products of this shape allow you to perfectly organize space. Their use is reasonable and economical. In addition, there is always the opportunity to move such tables. Often there are folding models that turn from square to rectangular.
Making such a product yourself is not easy. However, you can simply make two identical tables. Let us clarify that in terms of the homemade approach, it is square and rectangular tables that are suitable for “testing the pen” of novice craftsmen. And it’s easy to make, and the field for experimentation is wide.
- Round. A round or oval piece of furniture is suitable as a coffee table or night table. This is an ideal shape for apartments where families with children live, as it avoids unpleasant collisions with sharp corners. Technically, making them is more difficult, but the most unexpected objects can always come to the rescue, for example, car tires.
- Designer forms. The edges of tables do not have to be smooth. Sometimes they are made curved. Products can be rounded on one side, having right angles on the other. Triangular models are becoming increasingly common.
For example, in the kitchen a table that is rectangular in relation to the seating and rounded towards the sink and cabinets will look advantageous. Guests will be able to sit comfortably, and the hostess or host, while treating them, will not constantly bump into corners. Naturally, the production of such models will require higher technical skills. The main difficulty will be how to cut out the appropriate shape. This also imposes some restrictions on the materials used - beams, boards and logs in many similar designs technically inapplicable.
How to make from scrap materials
Sometimes it is difficult to restrain fantasy, then very interesting options improvised “offices” that can be used both outdoors and in modern high-tech interiors and not only - even at work. It is not difficult, for example, to make a table from a car wheel, or rather a tire. Attach chipboard to it on one side - slightly smaller than the radius, and on the other - legs. You can decorate the sides and lid to suit your taste.
If you pull the table with fibers or ropes, you will also get an ottoman - two in one. To create more effective fastenings, stock up liquid nails. The lid of such furniture can be made removable and subsequently stored in the “wheel” whatever your heart desires. With the right approach, such a hiding place will even become a mini-safe, where it will be possible to protect things at least from children, and not every unlucky thief who breaks into your home will guess such a little trick.
Nobody bothers you to assemble old boxes into a useful structure: you will get a kind of interesting labyrinth table. However, you need to be very careful here - many craftsmen who posted their creations from boxes on the Internet ended up with something more reminiscent of an urn. To avoid this, do not leave too much free space in the center of the structure.
Another, perhaps even more extreme option is to design a table based on an old suitcase. Such Soviet colossuses are waiting for the hour of their disposal on many balconies of the country, and perhaps now their finest hour has come. Just don’t literally rely on exceptional Soviet quality - it’s better to strengthen the product with sheets of, say, plywood. You will also need legs and wheels.
Disinfect the product before starting work. At the final stage, it can be varnished, painted or covered with fabric. This option is suitable for colonial and various retro styles, and in general it will look at least original in any room. Old frames can also be used usefully when working on a table - the main thing is to strengthen them well. With adequate design, you can achieve all the benefits of the pop art style effect.
A table made of pallets in a loft style will decorate almost any interior of a modern living room. You can also make an interior object from pallets, from an old window sill or tabletop (with an antique effect), from ceramic tiles, professional pipes. Table made of profile or water pipe and is completely a fashionable idea. And in general, almost anything is suitable for creating creative furniture: from old chests and barrels to mirrors, rolls of wallpaper and batteries - the main thing is to trust your imagination, sense of style and technical skills in working with materials and tools.
Beautiful ideas for interior placement
And finally, let's look at some interesting examples of homemade tables in various interiors. Let's start with the dacha. A large table made of varnished boards will fit well at a distance of several meters from the plantings. A light or dark brown color will harmonize perfectly with greenery. We divide the tabletop into five parts along the narrow part (according to the number of boards). By fastening them from below, we will maintain the effect of naturalness and naturalness.
The table will also be secured at the bottom by two floors, on which it will be convenient to place your feet. The benches are also attached to the table (consisting of three boards each). The advantageous design is emphasized by additional neat carvings on the sides. As a result, we have before us almost an example of the pre-revolutionary tsarist Russian style of the mid-19th century, or even modernism (depending on how you look at it).
It was in this setting that connoisseurs of rural idyll greeted guests at the beginning of the 20th century, organized creative meetings, exhibitions and even theatrical performances. This table does not look old-fashioned; it seems to continue the interior of a classic country house, where there is at least glass and metal.
Another example. River table for the living room. The easiest way to make a transformer with your own hands is to make an imitation of it, that is, do not use a plug-in structure in your work, but paint the product accordingly. In essence, this is a classic wooden table with a textured surface that will sit well next to a sofa or armchairs.
It is better to choose the color depending on the style of the room. Light wood will harmonize with light light tones and vice versa. The painted part (blue or its shades) should be in harmony with the chandelier or ceiling. Low vases with flowers or herbs will look beautiful on such a table. How simpler design such a table, the better - it can be used both as a coffee table and as a dining table.
The next idea is for the corner computer table, - also quite realistic for doing it yourself. We will make the corner parts rectangular, and the one protruding towards us will be of an arbitrary, but wide and comfortable shape, so that you can put your hands on it and place the keyboard. The materials we use are plywood or chipboard.
Ordinary wood will also work, as will old countertops, but working with the form in this case will be somewhat more difficult. If you still choose a “difficult” material, pay attention to varnishing and painting; it is better to pay special attention to these stages of work.
Colors we use homogeneous ones without overusing light shades. In our example, the table will be brown. However, for perfection design idea The color of the table should be harmonized with the color of the monitor, keyboard and system unit.
Among night tables, a two-level option would be practical and easy to manufacture. It’s easier to make it rectangular, but if your skills allow, it’s better to make it round. The lower ceiling is placed at a level of 10-15 cm from the floor, the upper - at the height of the mattress.
For a bedroom decorated in dark colors, a soft dark texture is suitable. The table can even be painted black. It will thus become a focal point of color in the room, giving additional contrast to the bed and floor. A pleasant visual effect will appear if you place a decanter of water and a glass on it.
And the last example is a compact small night bureau with two drawers. In this case we will select dark colors. The wood will need to be well processed and varnished. The design of the drawers is as simple as possible.
Dinner table - an essential attribute of any dining room or kitchens, center of attraction for everyone families both on weekdays, and especially on holidays, when behind him are going relatives and friends. Therefore, the table must be comfortable, high quality and beautiful.
Large in stores today choice, but it’s much more pleasant to make a dining table with your own hands. Moreover, this is significant saving for the family budget.
Dining table options
- Extendable dining table. The most popular option. Small for everyday use, this table expands significantly when guests arrive due to additional countertops
- Folding table – An excellent solution for a small kitchen. The simplest option is attached to wall table top and support leg.
- Folding table. A classic representative of this type of furniture - When assembled, it resembles a cabinet. It has one narrow frame tabletop and two wide large ones, which are located on the sides and fold out.
- Very convenient thing, which is suitable for both the kitchen and the living room. When folded, it can even be a full-fledged dining table when unfolded.
What can it be made from?
Materials that are used for the manufacture of dining tables, enough:
- tree;
- laminated chipboard, chipboard, MDF;
- plastic;
- natural or fake diamond;
- metal;
- glass and others.
Each of them has their own pros, and so are the disadvantages.
- Tree
A solid wood table is a classic. Wood attracts people not only because of its beauty, but also because it is easy to process. Moreover, a tree is ecological material that has a beneficial effect on human health. But, unfortunately, it has its drawbacks. At the table you need to be careful care. Wood is sensitive to climate change conditions in room. For example, if the room is quite damp or hot, this does not have a very good effect on the material. - Glass
be it magazine, lunch or some other, it looks very stylish. But this stuff is hard processed. In addition, not every glass is suitable for a dining table. Need to pick up lasting material. Best suited for countertops armored glass, the cost of which is very different from ordinary glass, and the processing is carried out only at the factory where it is used special equipment.
Wooden dining table
So you've decided do dining table on kitchen with your own hands. First of all, you need to decide dimensions future product so that it fits harmoniously into the interior.
You can take it ready-made drawing dining table, if indicated in it dimensions meet your requirements.
For example, consider manufacturing dining table made of wood.
This one is simple rectangular the table will have four legs Great look like in classic interior, and in Selecting the appropriate method finishing, you can make the dining table in or in
Materials and tools
Before assembling the table, prepare materials:
- balusters(legs) – 4 pcs. Height – 73 cm. They should not be thin;
- edged boards:
5 x 15 x 100 cm (for tabletop) – 4 pcs.,
80 cm (long crossbars) – 2 pcs.,
40 cm (short crossbars) – 2 pcs.; - sandpaper;
- glue carpentry;
- dowels.
Note: The boards for the table top need polishing.
necessary for making a dining table: - pencil, roulette, meter;
- hacksaw, a circular saw or Bulgarian;
- plane;
- drill(drill 8 mm.);
- screwdriver or screwdriver;
- self-tapping screws(30 mm);
- brushes
Manufacturing stages
Step 1. Making a table top. Boards trim first in width and then in length. Process surface plane. Sand the wood thoroughly until the table top is smooth. The edges must be well finished. If you do this, the boards will tight adjacent to each other.
Make identical marks on the edges of the boards, retreat 10–15 cm. Then drill out holes and apply into them carpentry glue. Plaster the edges. After which the choppers must be driven into the holes. Connect boards.
Excess glue must be removed emery paper. Level the joints between the boards with a plane, sand tabletop surface and edges.
Note: If you go over the countertop with a metal sponge, the wood will become more textured.
Step 2. We fasten the legs and do base for the countertop. Balusters must be connected to short cross members Thus:
Step 3. Pairs of legs connected by short crossbars are fastened together long cross members.
Step 4. Drill into the long cross members holes. When the glue dries, install table top.
For more strength the structure can be strengthened with additional transverse bars or boards.
How to properly make a table from a metal profile:
Table finishing
Definitely more before assembly need to antiseptic impregnation.
When the work is done and the table is ready, you need to take care of it finishing. First of all, choose color your product. It can be absolutely anyone. Best fit oak or walnut, these colors are considered classics.
Give the wood the desired shade and even imitate valuable wood species can be used with decorative stains.
For protection from moisture and giving presentable appearance need to cover the table several layers varnish Each layer must be dried thoroughly.
If desired, the tabletop can be decorate. For example, interesting and uncomplicated even for a beginner, it is applicable both for decorating a new product and for restoration dining table with your own hands.
How dining tables are made from wood, see video:
