≡× MENU

• Interior
• Window
• Walls
• Projects
• The buildings

Using the DIY garden chair plans, you will make a real wooden Adirondack garden chair. Adirondack: do-it-yourself chair for relaxing at the dacha Do-it-yourself wooden garden chair drawings

6732 1 2

How to make a garden chair: drawing and detailed description assemblies

Have you decided to buy a plastic chair or a wicker rattan lounger for your country house? Don’t rush to spend money, because it’s simple and at the same time comfortable furniture You can make it from wood with your own hands. I suggest a simple step by step instructions self-assembly armchairs from wooden boards. But first, let’s decide what kind of furniture you would like to see in your summer cottage.

Requirements for country wooden furniture

In order to decide what country chairs should be like, let’s imagine under what conditions and for what purpose this furniture is used.

A country chair is a design with a seat, back and armrests. If you attach runners to the supports, you can swing on the chair. Country chairs are used for short rest, both in the country house, and near it.

Operating conditions can be described as difficult, since most Since then, furniture has been used outdoors.

So, what qualities should distinguish country furniture?

• Durability. Furniture should last as long as possible, despite precipitation and direct rays sunlight and other environmental factors.
• Simplicity and ease of use. Furniture should be easy to carry so that, if necessary, it can be taken out of the house and then brought back. Ideally, furniture should be foldable at all.
• Low cost. The chair should be inexpensive, and preferably made with your own hands from available materials.
• Aesthetic appeal. A chair that will be used in a country house should decorate the interior and exterior with its appearance. country house.

How to prepare for work

First, select a drawing. If furniture is being made for the first time, the simpler the drawing, the better. In our case, the drawing is simple, but the finished furniture will be beautiful, stable and durable.

After the drawing is ready, we calculate the amount of materials and purchase everything necessary. In our case, a board with a cross section of 30×150 mm will be used to assemble the frame. To cover the seat and back, we use a board with a cross-section of 25×100 mm. Wood screws 40 mm long will be used as fastening elements.

Preliminary stage - cutting out the main elements

In accordance with the drawing, we calculate the configuration structural elements and cut the required number of parts from the board. For longitudinal and transverse cutting we use circular saw. For a curved cut we use a jigsaw.

After cutting, small chips or, on the contrary, protruding fibers will be visible along the cut line. In order not to remove these defects on finished furniture Upon completion of assembly, immediately after finishing cutting, go along the edge of the cut with sandpaper.

Manufacturing process

Illustrations	Step-by-step assembly description
	How to screw in a self-tapping screw? Almost all connections in the chair will be made using self-tapping screws, so you need to know how to screw them in correctly. We fasten the self-tapping screws by pre-drilling holes with a diameter of 2 mm. If you twist a self-tapping screw without first drilling holes, there is a risk of cracks appearing. Under the head of the self-tapping screw, we drill a countersunk hole to the diameter of the head and a depth of 3 mm. We recess the self-tapping screw into the recess below the surface of the board.
	Front legs. We make two parts shown in the diagram. The lower part of the part will be the front leg of the chair, and the crossbar will be attached to the central recess. The upper part of the part will be the armrest holder.
	We combine the front supports into a single unit. We install a 70 cm long crossbar into the central recesses on the front supports. All connections are made using wood glue and reinforced with self-tapping screws, 2 pieces on each side of the crossbar.
	Attaching the armrest holders. We attach the upper parts of the sidewalls, 60 cm long, to the front supports. We maintain a right angle between these two parts. We fasten using wood glue and 4 self-tapping screws for each connection.
	Hind legs. We cut two parts from the board, like those shown in the diagram. The length of the legs is 63 cm. The end of the legs is cut at an angle of 75° and 115°, respectively.
	Attaching the rear legs. We place the rear supports on the outside of the armrest holders so that the cutting line coincides with their surface. The extreme point of the bottom of the rear legs should be flush with the rear edge of the armrest holder.
	Strengthening the hind legs. To prevent the rear supports from moving apart during operation, we install a transverse spacer between them and tighten the entire assembly with self-tapping screws, 2 pieces on each side.
	Seat holder. The seat trim will be attached to the horizontal holders. The horizontal holders will be attached with a straight edge to the front cross brace, and with a beveled end to the previously installed cross brace of the rear supports.
	How to install seat holders. The diagram shows the location of the three seat holders and their distance from each other. We fasten the parts as usual with self-tapping screws.
	Back and hind legs. 61 cm long pieces of board are attached to the outer seat holders. The fastening must be made so that the end of the backrest holder is flush with the bottom edge of the seat holders.
	Back trim. We fill the planks on top of the previously installed backrest holders with a gap of 20 mm between adjacent planks.
	Seat. The seat strips are attached in the same way as the back trim strips.
	Armrests. We attach pieces of boards 64 cm long to the sidewalls, as shown in the diagram. Fastening is carried out using wood glue and self-tapping screws. We use at least 2-3 screws for each armrest. We round the edges of the armrests at the front of the chair.

We continue to work

After the assembly is completed and the chair is ready, all that remains is to complete Finishing work, as a result of which the furniture will become not only reliable, but also beautiful.

Since the assembly was carried out using self-tapping screws, there were recesses made for their heads on the surface of the wood. We fill the recesses with wood putty, matched to the tone of the boards. Apply the putty with a spatula and immediately level it.

When working with putty, we remember that such compounds are applied in a layer no thicker than 1-2 mm.

After the putty has completely dried, the surface of the wood is carefully sanded. For sanding we use a sanding machine with replaceable sandpapers. We use sandpaper alternately, changing the abrasiveness from 400 to 800.

After the chair has been sanded, we clean it from dust and soak it in two layers of drying oil, with a break for the previous layer to dry. Impregnation is needed, firstly, in order to reduce paint consumption and secondly, in order to make the wood more resistant to rotting. After the drying oil has completely dried, apply a couple of layers of paint.

Can I use varnish? Since putty was used when working with lumber, stains will show through the varnish, so in our case, using a continuous layer of paint is preferable.

The photo shows the finished result, which will look exactly the same if all the listed assembly steps were completed correctly in the sequence in which they are given in the instructions.

Let's sum it up

Comfortable armchair for a country house or summer cottage plot It’s not difficult to assemble at all and now you can definitely cope with this task. If you have questions while assembling furniture, ask them in the comments to the article.

November 10, 2018

If you want to express gratitude, add a clarification or objection, or ask the author something - add a comment or say thank you!

IN spring time many people wonder about creating garden furniture with your own hands. Such products can perfectly decorate any local area. Before you take on self-creation garden furniture, you need to decide what to make it from?

One of best options Wood is used to create garden chairs and other furniture. She fits perfectly into landscape design. Various other materials are combined with wood to create unique pieces of furniture that can become real masterpieces.

Who needs garden chairs?

A summer cottage is not just an area for growing fruits and vegetables, but also a place for outdoor recreation. You can make a durable and luxurious chair with your own hands. We will tell you what this requires in today’s article.

If you like to create various crafts with your own hands and are not satisfied with ready-made plastic chairs that do not fit well into the natural atmosphere, you need to read this material to the end. It should be noted that the design plastic items furniture rarely contributes to normal relaxation, so you should definitely try to make comfortable wooden furniture.

Basic requirements for garden furniture

Any garden wooden furniture must meet certain conditions - only then will it be able to for a long time serve you while maintaining its original appearance.

Transportability

Immediately when creating garden furniture from wood, keep in mind that the chair or table must be transportable. Otherwise, you will have to take care reliable protection them from precipitation and other weather influences. There are various antiseptics, paints and varnishes for this, but all of them in any case will not make your wooden furniture last forever.

Hardwood

For garden furniture, hardwoods such as:

These materials are more expensive than pine, but you can create really high-quality structures. Aspen, cedar, larch and pine are well protected from rotting, but the latter is very sensitive to mechanical influences such as impacts. Even a slight impact is enough to form a dent, which you will then be unable to remove.

Weather protection

Pay special attention to protecting furniture from the elements. Yours wooden crafts They will probably stand in the sun for a long time, and sometimes they will be watered by torrential rains. Thus, you must take care to protect them from the listed influences.

Even before assembling the furniture, you should stack the purchased boards in a stack under a canopy and press something heavy on top so that the wood dries out. It is better to initially buy dry lumber highest quality. When working, grind all parts and impregnate them with antiseptics, and then treat them with hot drying oil. After drying, coat the elements wooden furniture varnish for exterior use - this is very important!

Relief texture

The decorative cut of a tree and the relief of its texture depend on the number of twigs and branches that have not had time to develop, that is, the more there are, the better. The polished surface will look like walking grape snails.

Preparatory work

First you need to collect everything necessary tools and prepare parts for a wooden garden chair. We recommend sawing all blanks from cedar boards, not counting the insert strips. Take a board with a thickness of 20 mm or more.

So, to assemble a garden chair you will need the following parts:

• rear legs 20x254x787 mm – 2 pcs.;
• front 20x76x533 mm – 2 pcs.;
• back 20x279x533 mm;
• armrest support 20x127x406 mm – 2 pcs.;
• rear support 20x76x610 mm;
• lintel 20x51x589 mm;
• insert strips 12x20x254 – 2 pcs.

Materials for work

For creating wooden chair With your own hands, based on photos and drawings, you will need the following set of materials:

• hardwood dowel 24x60 mm – 30 pcs.;
• brass screws;
• sandpaper No. 220;
• furniture varnish;
• drying oil;
• masking tape;
• cardboard or thick paper.

Tools

To create a chair with your own hands from a photo, you will need:

• plane;
• Circular Saw;
• drill;
• screwdriver;
• hacksaw;
• clamps;
• sander;
• ruler, pencil and tape measure.

Chair assembly process

The assembly process is quite complex and begins with preparing everyone necessary details. Read on to find out how to do this.

Cutting out the main parts

The process of creating a wooden chair for the garden begins with cutting out the parts. will help you correct drawing, which should be followed during the assembly process.

Prepare all the parts, including the back legs, back and everything else. It’s good if you have a drawing of a garden chair with all the details and explanations. Refer to it, mark and cut out all the details.

It is better to cut out the rear legs, seat, back and armrests from wide panels. They can be created by gluing together boards selected according to the texture and color of the wood.

Using a stencil made from cardboard or thick paper, cut out the back legs. Attach the template to the wood from which you plan to make the leg, and trace it with a pencil. Connect two pieces to each other using masking tape or clamps, and cut out two at once. Cut out with some margin so that you can later use a router or plane to adjust the parts to the ideal size.

Make the back by sawing the workpiece so that glue line ended up strictly in the center between the boards. Bevel the bottom end at an angle of about 12 degrees to match the profile of the rear legs. We recommend rounding the top edge.

After completing the work described above, you can begin assembling the chair with your own hands using the photo.

Assembling the chair and cutting the remaining parts

First, assemble the rear legs and backrest according to the following instructions:

1. Drill the mounting holes to prevent the workpiece from cracking later.
2. To fix the rear legs, you need to use 50 mm long screws and glue.
3. Fasten the side ends of the back and legs at an angle of about 12 degrees.
4. Cover the gaps between the parts using insert strips, making them of a suitable profile. The opposite ends of the legs and the ends of the planks must match - this is a sign correct location backrests
5. Screw the inserts to the back using 50mm self-tapping screws.
6. Using a circular saw, cut the part to the width.
7. Mark the sides of the seat that are at a certain angle.
8. saw the workpiece on the sides along the outer line of the drawn markings. You don’t have to sand the raw ends yet.
9. Select a groove at the back end of the workpiece and tilt the bottom at an angle of approximately 12 degrees. This is required so that the seat is located at an angle relative to the backrest. The joint will be tight - this will add strength.
10. Round the front end of the seat.
11. Attach the legs to the seat, and sand its edges and fit them flush to the back legs.

Making the front legs

You need to cut out the front legs and bevel their top and bottom edges by 6 degrees. Screw them to the rear using screws and strengthen the connection with good glue. Make a bridge between the legs, which will make the chair more stable and reliable. To make it you need to do the following:

• Attach wooden blank to the front legs and mark the groove. The bottom of the groove must be made to the face at an angle of about 12 degrees.
• At 9mm deep, select wood from the high side of the groove.
• Attach the jumper to the front ends of the legs with glue and secure with self-tapping screws.

Armrests

First you need to cut out the wedge-shaped supports for the armrests and bevel their upper edges by 6 degrees. Next, we attach the supports to the front legs with screws and glue, and then follow the instructions:

1. We cut out the armrests and the rear support for them, and then sand all the parts with sandpaper.
2. We cut off the ends of the support by 30 degrees, and the upper edge a little more - by 31-32 degrees.
3. We press the rear support part to the back using clamps.
4. We set the position of the rear support element according to the level and achieve strict horizontality of the armrests.
5. Tighten the clamps and screw the rear support to the backrest.
6. We screw the armrests to the rear support, and then to the wedge-shaped supports and front legs, using self-tapping screws with glue.

It is necessary to close the recessed heads of the screws with wooden plugs and sand them flush. Soak the wood in hot drying oil, dry the product, and then varnish it. The result should be a classic convenient design with an attractive texture that you can sit on comfortably.

Let's sum it up

A wooden garden chair, made from a photo with your own hands, will add a unique flavor to your site. The main thing is to protect the structure from atmospheric influences, and it will serve you for many years.

After a hard week of work, you want to relax, sit somewhere in the garden or in the country, enjoy the sounds of nature, and relax in a comfortable chair. You can get special pleasure if you make a chair for your garden with your own hands from wood. A beautiful, light country chair will be an effective element of the design of a summer cottage and a source of pride for all relatives. Today we will tell you how to make a chair for your garden with your own hands, having carpentry tools and a charge of healthy enthusiasm at hand.

Features and advantages of the material

The cost of massive wooden furniture is quite high, so many owners prefer to make interior items for their country house with their own hands.

Wood is the best and environmentally friendly material for the manufacture of furniture in a summer cottage, thanks to the following set of qualities:

• Lumber is available anywhere in the country, and boards and timber are widely represented on the shelves of construction stores.
• The price of lumber is relatively low.
• Wood raw materials are pliable even with simple tools.
• The material is environmentally friendly, natural, does not contain harmful impurities and does not emit volatile toxic chemicals or toxins. Everything is exactly the opposite - boards and beams, especially coniferous ones, emit a pleasant forest aroma.
• The texture and color of the wood is uniquely beautiful and is very suitable for a country atmosphere. The material harmonizes perfectly with any country landscape.

The most suitable types of wood for making furniture:

• Ash.
• Pine.
• Nut.
• Larch.
• Linden and alder are more suitable for making parts that will not experience increased load.

Important! It should be remembered that wooden furniture will be used in extreme conditions: under the rain and scorching sun, under the influence of insects, bacteria, fungal spores. Therefore, special attention should be paid not only to the choice of wood type, but also to finishing and treating all parts with an antiseptic.

• All wooden parts first soak it with an antiseptic complex with an antifungal effect, and then paint it and open it with varnish.
• To make furniture, use only dry wood - boards or logs. Hemp, branches, and logs are also suitable for work. Furniture made from rough wood with minimal processing, looks stylish.

Important! Relatively new material for the manufacture of garden furniture - wooden pallets or pallets. They are mainly used for transporting building materials. You can easily make a bed, armchair and sofa from ready-made pallets. For a bed frame it is often enough to connect several pallets together, and for a sofa or original chair 2 standard pallets are enough.

Before using pallets, they must first be prepared: cleaned, washed, sanded, and then wiped with a damp cloth, primed, varnished or painted.

Selecting a chair model

As they say: “Relaxing without a chair is wasted time.” In order to relax in comfort, you need to choose the right chair model.

Model options

Today the Internet is full of drawings various options wooden furniture. It can be:

• Stationary and folding models.
• Single and double chairs.
• Children's and adult furniture.
• Rocking chairs.
• High and low designs.

Of course, within the framework of one article we cannot consider each model separately, but it is quite possible to give some advice on choosing:

• Choose only those models whose design you completely understand. In the process of work, you must fully understand what and how to do, what tools are needed, how to work with them, whether you can master this design yourself, without the help of specialists.
• When choosing a furniture model, take into account the conditions and place where it will be used. For a cottage or garden, for example, a DIY rocking chair and a folding model are perfect.

How to make a chair for your garden with your own hands?

To make furniture from wood, you need to have minimal skills in working with carpentry tools. Although, in order to make simple models of chairs, you will need the bare minimum:

• Drawing tools: ruler, pencil.
• Hand tools: saw, plane.
• Power tools: drill, jigsaw.
• Fasteners: self-tapping nails, bolts, washers.
• Consumables: paint, drying oil, glue (PVC or special furniture), antiseptic, varnish.

General principles

The entire process of making wooden furniture is as follows:

1. Make a drawing of the chair on paper, indicating the dimensions.
2. Transfer the template for the details of the piece of furniture onto the lumber.
3. Cut out all the parts and sand.
4. Mark the places where the parts are attached.
5. Drill through holes for fasteners.
6. Secure all parts with self-tapping screws.
7. Putty all the cracks, sand the surface of the furniture with fine sandpaper.
8. Treat the surface of the chair with a primer and cover it with varnish or paint.

To apply step by step process making a wooden chair in practice, we invite you to use simple models that you can make with your own hands.

Model No. 1. Fabric chair on frame

This is the most convenient option for a folding chair. The fabric seat can be washed, which is very convenient in country conditions, and the chair frame easily folds almost flat and can be transported to any place convenient for you.

To work you will need following materials and tools:

• Reiki round section: 2 pcs. 55 cm each, 2 pcs. 60 cm each, 1 piece - 65 cm.
• Reiki rectangular section(25x60 mm): 2 pcs. length 120 cm, 2 pcs. 110 cm each, 2 pcs. 62 cm each.
• Furniture bolts and nuts (diameter 8 mm).
• Round file.
• Fine-grit sandpaper.
• Glue.
• A piece of durable fabric (200x50 cm). Use fabrics that are abrasion resistant, such as canvas, canvas, mattress teak, denim, camouflage.

Having prepared everything you need, proceed as follows:

1. Cut the slats required length. Use hardwood - oak, birch or beech will do.
2. Sand the slats thoroughly.
3. Assemble from slats rectangular and flat section two rectangles that will be the frame of the chair. To do this, step back from the ends of the rectangular slats and drill holes with a diameter of 2 mm. Lubricate the round slats with glue and install them in the holes.
4. At a distance of 70 and 40 cm from the corners of the frames, drill holes with a diameter of 8 mm.
5. In one of the frames (the smaller one), at a distance of 7-10 cm, make 3-4 cutouts so that you can change the position of the backrest. Sand the cutouts using a round file.
6. Completely assemble the chaise lounge frame.
7. Fold the lounge chair and measure the length of the fabric on the seat. Make sure the fabric is slightly stretched.
8. Finish the edges of the fabric and nail them to the round slats on the frame.
9. Wrap the crossbars with the edge of the fabric and secure with small nails with thick heads. You don’t have to nail the fabric, but secure it to the crossbars using peculiar loops.

Model No. 2. Rocking chair

To make a rocking chair with your own hands from wood you will need:

• Europlywood 30 mm thick.
• Jigsaw.
• Grinder or hand router.
• 50x25 mm block for cross slats.
• Fastening elements: confirmats 5x120 mm (12 pieces) and screws for wood 4x45 mm (140 pieces).
• Sandpaper.
• Drawing tools.
• Drill with drills.
• Putty, primer and varnish.

The rocking chair model consists of the following parts:

• Sidewalls - 2 pcs.
• Tsarga (upper connecting strip between legs) - 3 pcs.
• Cross slats - 35 pcs.

Manufacturing process:

1. Make a pattern for the sides on paper.
2. Transfer the drawing of the part using a pattern onto euro plywood.
3. Cut out the sides with a jigsaw.
4. Sand the parts and chamfer them using hand router or Bulgarians.
5. Cut out 3 drawers from plywood, 120 cm long and 10 cm wide. Sand the parts.
6. Cut 35 pieces of 120 cm each from the block. Sand the slats and chamfer them.
7. Approximately in the middle of the outer arc of the side spars, mark the attachment points for the drawbars (in the area of ​​the legs and headboard).
8. Transfer the marks to the second side and drill holes with a diameter of 8 mm.
9. At the ends of the drawers, drill matching holes with a diameter of 5 mm.
10. Tighten the frame of the chair with drawers and secure them with confirmations.
11. Assemble the frame of the future chair.
12. Take the cut cross bars and secure them to the seat with self-tapping screws.
13. Fill all the cracks and sand the surface of the furniture with fine sandpaper.
14. Treat the wood with a primer, having previously impregnated the wooden parts with an antiseptic complex.
15. Apply three thin coats of exterior varnish to the surface.

Carpentry enthusiasts are always wary of switching to upholstered furniture and prefer to buy ready-made kits sofas and armchairs, complementing them in style with tables and cabinets self-made. There is a reason for this: firstly, for this you need to master related disciplines, such as cutting and sewing or knitting, and secondly, take care not only of strength and appearance product, but also about the comfort of sitting or lying on it.

But trying is not torture, for testing you can make a modest carpentry, using simple method upholstery made of foam rubber or ready-made pillows for furniture. Making chairs can become a fun team hobby; friends or family members with different applied skills can combine their talents and connect on different stages creation upholstered furniture. This will open up a lot of scope for design solutions and material selection.

Classic armchair

The production of this small-sized chair consists of two main stages.

Preparing parts and assembling the frame

You need to work especially carefully on the hind legs to get curved shape which you need to use a ready-made pattern and a jigsaw. The vertical part of the backrest and the rear seat support are attached to the rear legs.

The front legs have square section and can be made from glued rectangular bars. Their ends must also be narrowed using electric jigsaw. Fastenings are made with self-tapping screws, for which it is necessary to pre-drill holes with a diameter less than one third.

Before installation, wood glue is applied to the surface of the joints. The seat bars are secured in the corners with additional parts, with edges cut at 45 degrees. For seating, you can use plywood or furniture fabric strips.

At the last stage of assembly, the armrests and shaped backrest ears are attached. The dimensions of the parts can be taken from ready-made drawings, or a pattern can be taken from old disassembled chairs.

Upholstery

Back and inner part armrests are covered with textile furniture tape. The seat is covered with layers of foam rubber, padding polyester and fabric, which should be 4-5 cm larger in size, due to which they will be folded in the front part and attached to the bottom of the seat.

Then the armrests and backrest are upholstered. To obtain a rounded shape, special recesses are made; after fastening, excess pieces of foam rubber and padding polyester are carefully trimmed. To master furniture upholstery skills, you will have to be patient and use video lessons.

Lattice chair with reclining seat

To make a lattice structure, you need a beam with a cross-section of 2.8, which is cut into strips of the same length 50-60 cm, depending on the selected dimensions of the product.

The workpieces must have a perfectly flat surface, and you must also try to mark as accurately as possible the places for attaching them to the rack.

For the manufacture of load-bearing structure– sidewalls, 3 cm thick plywood is used, from which the sides of the chair are cut according to the pattern. These two sanded pieces are then connected to each other by bases called drawers: at the bottom, at the top and at the level of the seat support.

Then the prepared bars must be secured to this structure with self-tapping screws at intervals of 2.5 cm. The edges should be rounded. The photo shows several different models armchairs from bars, made independently using this technology.

Country chairs

These wooden chairs are a more simplified version of the classic ones. Assembly diagram wooden frame fundamentally the same, but the wooden parts are not rounded; the simplest armrests and even legs are made from the bars according to the principle of a children's construction set.

Special attention is required when processing the end parts of furniture that will be located on outdoors. After thoroughly sanding the surface, it is treated with hot drying oil and coated with 3 layers of varnish. Removable cushions add softness to the country chairs.

Hanging chair hammock

To make this necessary attribute of relaxation on modern dacha you need to know how to knit using the macrame technique.

Basic materials:

• two hoops, a small one for the seat with a diameter of 70 cm, and a large one for the back - 110 cm, which can be made from water pipes metal-plastic pipes. To secure the connection, you can use plastic or wooden inserts that are placed inside the pipe and secured with screws;
• cord for weaving, can be made of polyamide with a polypropylene core, the knots of which are easily secured, do not stretch and do not slip.
• fasteners, wooden rods.

At the first stage, the entire circumference of the hoops is covered with uniform turns of cord, then inner space The seats are knitted with a double cord mesh made using one of the macrame techniques.

The seat and backrest are secured with two wooden rods, which are fixed using cuts; in the front part, the seat and backrest frame are connected using a winding and two thick cords.

To others convenient option for a dacha it can become hanging chair, which you can make with your own hands from thick fabric. For the base you will need one hoop with a diameter of 90 cm.

For the cover, a 3-meter piece of fabric is taken, which is divided into two identical squares with a side of one and a half meters. Then the circles are cut out and a double cover is sewn with an allowance. The groove for the hoop is reinforced with padding polyester tape, then holes are cut to secure the scabs.

The following ideas are suitable for sewing and knitting enthusiasts who want to apply their skills to making furniture.

Chair cushion

It is better to sew the first such chair with your own hands, using ready-made patterns in the shape of a pear or a ball, strictly adhering to the given dimensions, and only then can you improvise with the silhouette and dimensions. You will need a bag of foam balls, fabric and zippers for the inner and outer covers, and a sewing machine.

The seams are made double for strength; when filling, a plastic or cardboard tube is used, which helps not to scatter the electrified foam crumbs.

You can improvise with the shapes and colors of such chairs. With this technology, if the work is completed, there can be no defects. Failed instances may become original pillows for children's games.

Bottle chair

This is the simplest know-how that does not require any special skills, just the desire to do something with your own hands.

To collect required quantity material will take some time. It will be necessary to collect identical two-liter plastic bottles, clean them and make blanks by cutting top part and inserting in pairs into each other. Then the blocks are prepared different sizes for seat, armrests and backrest, secured with tape.

The chair is assembled into classic style, rectangular blocks of various sizes for a seat, backrest and two armrests. After assembly, you need to wrap the entire product with polyethylene stretch film, and then decorate it with stylish pillows or sew a cover.

Frameless chair-bed made of foam rubber

In order to make such a chair with your own hands, you need to delve into the instructions, especially in the part that explains how to attach ready-made blocks.

Once you grasp the essence, and it consists in a special method of sewing covers along the edges to each other, you can easily assemble soft folding structures - corners, armchairs and sofas of any size. You will also need to learn correct calculations when cutting out foam rubber and patterning covers.

DIY chair photo