How to make a tool box: choose a shape and a drawing for making it yourself. DIY tool box (69 photos): assembly instructions and configuration tips Making a tool box
There are many professions that use different kinds tools. Most often, tool boxes are purchased to store them, but sometimes it’s easier to make high-quality storage with your own hands
If you are interested in this or that type of craft, and you don’t sit at home with your hands folded, naturally, you collect a fairly large number of tools. To ensure that your tools are always at hand and securely stored, they need to be provided with a safety system in the form of a separate closed space called a box for storing tools. In addition to safety, using such a box will greatly help in your work, since the contents will be neatly sorted into compartments and can be found later necessary equipment"blindly". This device is also needed by car owners, or rather by owners trucks and gazelles. The box must be well secured in the car. This means that when making it with your own hands, you need to think carefully about where it will be located in the car and how to secure it there.
Decide on two criteria:
- Will you only store tools in it, or do you also need it for ease of transportation?
- What sizes of tools do you plan to store in it?
Classification of boxes
Based on body material:
- plastic – light in weight, convenient to use and for transportation;
- metal - much heavier than plastic, but at the same time much stronger, more stable, have a more rigid structure, cannot be large in size due to the heaviness of the metal;
- galvanized metal-plastic – lightweight, durable and spacious, suitable for both storing and transporting professional tools. But all these advantages also determine the corresponding price - it can range from $150 to $500 and above.
- wooden - the most available material for making a tool box. Moreover, it is easier to make with your own hands from this material, or rather from plywood 10 16 or 18 mm.
By type of stored instruments:
- hand tools - as a rule, they are represented by one large compartment for large tools (screwdrivers, hammers, keys) and 2-3 small ones for smaller tools;
- An electric tool is a case that is functionally designed to store and move a specific power tool. Most often it has one main compartment for the device itself and several recesses for equipment.
- organizers are boxes designed to accommodate a large number of tools of various sizes. They have many compartments; models with modular partitions, which can be rearranged from one place to another for the convenience of the owner, deserve attention.
- professional instrument – a special type of cases with certain seats for specific tools that are more resistant to drops and adverse environmental conditions.
- non-professional tool - consists of boxes of both small and fairly large sizes with many compartments and niches for various kinds tools, often these are cases in the form of bags.
There are many tool box manufacturing companies such as stanley,fit– American companies, keter– no less popular Israeli company, Spanish company tayg, German Croft and many others, differing in quality and price of products.
As an alternative to all these companies, there is the opportunity to make a tool box with your own hands. This way you can save on cost and get a very competitive option that meets your exact requirements.
Types of boxes
DIY tool boxes are mostly made from wood and come in a variety of shapes. Popular and easy to make boxes are the classic “basket” shape. in second and third place - a box in the shape of a chest - a container, and in the form of a case.
 |
 |
 |
Materials for making a tool box
- wooden boards 15-25 mm thick
- round wooden rod of the required length
- self-tapping screws, wood glue, sandpaper for cleaning surfaces
- set of tools - Sander, electric drill, jigsaw, screwdriver
- measuring instruments - ruler
- screwdriver, hammer
Manufacturing stages
Using this technology it is possible to produce boxes more complex structures, creating due to partitions required amount compartments and niches.
Using the same technology, it is possible to produce a closed box, which is more reliable and convenient for transporting tools.
Additional steps in making a box with a lid
For self-made currently popular transformable boxes You'll have to rack your brains more, but it's quite possible to implement this idea.
To do this, you need to develop the design you want using computer programs, and the kit will help you bring it into reality necessary elements, which can be purchased in special stores. The number and complexity of the selected elements depends on your requirements for the box. Assembly can be done at wooden base using aluminum strips and angles. Fastening is done using rivets.
If you are a purposeful and creative person, then the process making a tool box will not be difficult, but when you see the fruits of this labor, you will increase your self-esteem and save budget funds.
A large and convenient toolbox is the dream of any craftsman. This is understandable, because in such storage you can compactly put all your tools. Today they are not so expensive, so one of the options is to purchase them in a store or create such a masterpiece yourself. Which option will be acceptable for you? Of course, the purchased one has certain dimensions, but there may be many more tools than can fit in it. But one way or another, you will have to put up with it or run to the store again and buy a new one. It’s a completely different matter to do it yourself: pick up required material and calculated for all available tools and even with the future. Comfortable? Most likely, you will agree with this argument. Therefore, in this article we will talk about how to make such a box yourself at home.
What should HE be like?
If this is a home box, then it can be a regular box with a handle. Well, if you, for example, are a plumber, then it is clear that you will need a box that is more functional, spacious and durable. The organizer will successfully fulfill this role. However, in this article, as an example, we will consider a simple home option- box with handle. So, we will assume that we have decided on the type of box where we will keep all the tools we need, or almost all.
Where do we start? First, let's select the material. It could be plywood, wood or even metal, then we will make the calculations. Only after this can you begin to draw up a detailed drawing. It can be done in the classic way, that is, on whatman paper using a well-sharpened pencil, ruler, compass, square, etc.
Non-classical method - using a special computer program. “Autocad” and “Compass” are precisely “sharpened” to make a professional exact drawing. The advantage of such programs is that they will help you avoid errors in calculations and, moreover, you have the opportunity to see in advance what you will get from all this.
These programs will serve good service only if you have certain skills in working with them.
The material has been selected, and now for manufacturing it remains to assemble all the tools that we will need. Of course, the types of tools are individual. It all depends on what kind of box you want. They are also different. But, one way or another, there are universal tools. They are always needed. This is the measuring tool:
- fasteners;
- hammer;
- screwdriver.
Let's start production
Let's take it traditional material – edged board coniferous species. As for processing, this is the simplest and most affordable material, which also has good strength properties.
As planned, it will be a wooden box, and our task now is to materialize the drawing itself into material. For this task we will need a ruler and a pencil. After this, we mark the material and cut out the component parts of the product with a hacksaw or jigsaw. If we planned a regular non-closing option, then we need to make five planes: four walls and a bottom.
When assembling, it is usually better to use wood glue. The joints must be cleaned, and only then glue must be applied, after which we firmly press the parts together. Be sure to let the glue dry completely.
After this operation, we can further strengthen the box with fasteners - self-tapping screws. Secured. Now you need to make a handle. It could be ordinary wooden slats, which we need to nail or screw to the upper edges of the side elements.
Organizer
Following the principle “from simple to complex,” let’s now talk about the organizer. It is clear that you can put a large tool in the open-top box described above: hand saw, hammer, mallet and much, much more.
Where do you put the little things? There are all sorts of screws, bolts, nuts, etc. These small fasteners tend to get lost or not be there exactly at the moment when they are especially needed. This is where we need an organizer.
As already noted, this type of box by its design is the most functional in operation. What is he? This is kind of like a box on a box, or rather, many drawers in one section for storing not only medium-sized tools, but also all sorts of small things. Of course, at first glance, it may seem that making such a structure would not be easy. But it only seems. Difficulties mainly arise in the manufacture of the sliding mechanism. Everything else is much easier to do. Now in more detail about the manufacturing technology.
- We start by making the main body. It must be open and deep in order for us to place various instrument medium-sized (hammers, wrenches, etc.). We can say that the design of this main body is quite simple, but in essence it is an ordinary box that can be vertical planes divided into several sections.
- The next stage is the production of 4 smaller boxes. You probably noticed that the number of these sections is even, and we mentally divide them into pairs, trying to adhere to the dimensions of their lower large brother when manufacturing. They will be installed on top of each other. One pair of boxes (top) will have lids. They will either be folding on piano hinges, or retractable like a Soviet school pencil case.
- Now all that remains is to connect these boxes together. We will do this using metal connecting strips. We will need 6 pieces. On one side, as well as on the other side, we hook one plate at a time (short) to connect the two lower boxes - small and large. Two more plates (long) will connect all the boxes together. And finally, the longest bar will serve as a handle, and at the same time connect two upper floors organizer. As you can see, there is nothing complicated here, and the sliding mechanism is extremely simplified, as is shown in the example of a metal organizer - the principle is the same.
Making a metal case for tools
Let's talk now about the metal case homemade. Don't immediately conclude that this is impossible. Of course, only an experienced mechanic can make an organizer out of metal on his own if he has special tools and the appropriate material. Factory-made metal boxes are usually made of lightweight metals such as aluminum so that the box itself is not heavy. Working with aluminum at home is difficult.
In principle, a metal box is a strong word. Rather, an ordinary box will be made of metal. The material needed to make such a box is ordinary soft galvanized steel (about 0.3 mm thick). The tools we need are:
- square;
- caliper (marking);
- sharpened small core or marker;
- ruler;
- hammer;
- anvil (wide metal bar);
- file;
- pliers.
Then everything follows the same scenario: drawing, marking. The most interesting thing is that all this can be done directly on a galvanized sheet using a sharply sharpened core (or marker), however you like. We then mark with a marker on the metal those places that we will have to remove.
After this, we proceed to trimming using metal scissors.
After cutting off all the excess, we get this complex geometric figure (“winged rectangle”).
Now let's work a little as blacksmiths. For this task, we have an anvil, and, tapping with a hammer, we carefully bend the edges of our workpiece. It is better to do this not chaotically, but in a certain order.
First we bend one side, and then we bend the other.
Now the side panels take turns.
After this, we will begin bending the protruding petals. They will make the structure itself more rigid, and it will not “play.”
We can use pliers to wrap the protruding parts on the top of the box.
After such manipulations, you should carefully go over the entire product with a hammer, straightening it.
In this case, it turned out to be a small box. But using this principle, you can make a similar one - larger, and in the end you will get a metal tool box like this.
So, if you want, everything is possible.
We hope that this article will be useful to you, dear readers. If your tools are organized, then complement it by making a regular tool box. If your tools do not have a permanent “place of residence,” then think about building a two- or even three-story “transformable house” for it. Try to do this, and your tool will always be in place, and you yourself will be pleased to use a product you made yourself in your household.
Video
This video shows how you can make a toolbox from scrap materials:
See how you can make tool organizer cases yourself:
A good owner will always have a whole arsenal of tools at hand: from nails and self-tapping screws to pliers, a level and a set of screwdrivers, not to mention a drill, hammer drill and screwdriver. Very often simple household repairs does not start at all due to the fact that the master cannot find all the tools he needs in the apartment or garage. To prevent this from happening, all working tools should be stored in a specially designated place - a tool box.
What types of toolboxes there are, what requirements they must meet, and how to make a toolbox with your own hands - this is what the article is about.
Types of tool boxes
Essentially, a toolbox is a box with or without a lid, divided into several compartments of different sizes and shapes. Small drawers are designed to store fasteners; they can contain drills, tips or other small parts. As a rule, such boxes are divided into several compartments, each of which has a separate lid. These boxes are easy to carry because they weigh little.
Larger cases are needed for storing and transporting large tools such as hammers, saws, drills or jigsaws. Very large boxes will be needed to contain hammer drills, levels or mallets. These tool boxes are often made on wheels so that they can be moved and transported.
Professional tool boxes may differ depending on the qualifications of the master: for example, a plumber needs one set of equipment, and a car mechanic needs a completely different one. You can find such boxes in construction supermarkets or specialized stores; they are often sold complete with the tools themselves.
Cases are divided into several categories. Here, not only their size is taken into account, but also their design, as well as the material of manufacture. Structurally, these could be:
- Open boxes with handles to hold large tools and make them easier to carry from one place to another.
- Multi-tier boxes with many small and large compartments for comprehensive storage of working parts and their easy transportation. This box can be thrown into the trunk of a car or carried in your hands.
- Compact cases with an ergonomic handle containing all the tools needed for minor repairs or trips to the country.
- Dressers consisting of several pull-out compartments are usually used permanently at the place of work.
- Tool belts are needed for those who work at heights or in hard-to-reach places.
- Trolleys are unique tool boxes on wheels, differing large sizes. Such devices are used to move very large equipment, such as welding machines, Boers.
Important! When choosing a box for your tools, it is better to give preference to multifunctional boxes, where each part has its own place, and small compartments are closed with lids. Otherwise, all the tools risk getting mixed up during transportation.
What are tool boxes made of?
Cases and boxes can be made from various materials, but the main requirement for them is one thing - the boxes must be light, since the tools themselves weigh quite a lot. There are a few more nuances that those who buy a case for their arsenal of tools need to know about:
- The bottom of the box should be as thick as possible, since it is on it that the entire mass of the contents presses.
- A full box should not be deformed when lifted - the walls remain perpendicular to the lid and bottom. If the walls sag, this indicates that the strength of the case is insufficient for such a set of components.
- It’s good if the material of the box is fire-resistant, then the expensive tools will survive even during a fire.
- If there are gaps in the box, dust and debris typical of construction will get inside the box and contaminate the tools. And in this case, the contents are at risk of oxidation and rust due to high humidity.
- Durability is an important factor, because professional boxing costs quite a lot, and the load on it from metal components will be significant.
Today, the most popular materials for such boxes are:
Attention! All materials must comply with special standards, because if the box breaks at the most inopportune moment, all the heavy tools will fall on the feet (or head) of the unfortunate owner.
If you can still make a metal or wooden tool box with your own hands, then you can only really buy plastic boxes.
How to make a tool box with your own hands
If the owner decides to make a box for his equipment himself, first of all, he needs to decide on the dimensions and choose the design of the box.
To do this, you need to inspect all your tools, measuring the largest elements and taking into account small things (bolts, nuts, washers, etc.). Based on these parameters, the dimensions of the container itself and the internal compartments are calculated.
Tool box design
When talking about the design of boxes, they do not mean their shape, but the method of opening and the presence of additional sections. The following designs are considered standard:
- Case - portable box rectangular shape with a handle. As a rule, cases are divided into many departments and have removable partitions that allow you to independently divide the space inside the box. The weight and dimensions of such cases are usually small.
- Container - A larger box for many tools. As a rule, it has the shape of a trapezoid with a rectangular bottom. Inside this box there are also partitions, and there may also be separate smaller boxes (folded like a nesting doll). Sections of such a container can be pulled up and to the sides, forming a whole “trellis” with tools and fasteners. Large tool boxes of this type can be equipped with wheels, which is very convenient and practical.
- Multiboxes are located vertically and the drawers in them slide out along guides, like in a regular chest of drawers.
The easiest way to make a tool case with your own hands is because this design does not have complex mechanisms and hinges, with the help of which additional sections move out.
Important! Although it is quite possible to build a container with boxes that fold into several floors with your own hands. To do this, each pair of “floors” should be fastened with metal brackets, providing mobility to the elements (as in the figure below).
Bringing an idea to life
If we talk about the material for making a box yourself, then, of course, it is easiest to work with wood. For the first experience, it is better to choose inexpensive wood - planed coniferous boards are quite suitable for boxing.
The entire process of making a tool box consists of several stages:
- They draw up a drawing of the future boxing. To do this, use regular Whatman paper and a ruler or professional program type "Autocad".
- The resulting drawing is transferred to wood using a simple pencil or marker.
- Cut out the parts along the contour using a jigsaw or saw.
- The wood is treated with antiseptic agents or stains to prevent it from rotting and make it “inedible” for insects and rodents.
- The box is being assembled. Now all the parts need to be connected into a single structure, according to the drawing. To do this, it is best to use wood glue, which is applied to the ends of the parts and pressed against each other for a few seconds.
- It is better to additionally secure the elements of the box with self-tapping screws, making sure that the wood does not crack when screwing in the fasteners.
- Install the lid using regular hinges or another device appropriate to the type of box opening.
- The lid is equipped with a handle for carrying and transporting the box with tools.
- Inside the box is marked into sectors, taking into account the diagram and drawing. Additional partitions are cut out from the board and secured in place using glue and self-tapping screws.
- The walls, bottom and lid of the box are sanded with several types of sanding paper, then painted or coated with several layers of varnish.
The box is ready for use, all that remains is to fill all its compartments with the appropriate tools and fasteners.
The simplest tool box
Beginners in carpentry are offered more simple design tool box - a regular box with a handle, but without a lid. The advantage of such a box is that it is suitable for tools various sizes, if desired, you can even place a water level or a hammer drill here, or you can make a miniature box for the “apartment” master.
This box consists of only six parts:
- two long side elements;
- two short sides, the height of which should exceed the height of the long sides, since the handle will be attached here;
- the bottom, which should be made from a single piece of wood, since it is the bottom that takes the load from the weight of the tools;
- handles, the role of which can be played by a block, strip or piece round section- the choice depends on the size of the box and the expected weight of its contents.
If desired, the design can be supplemented with internal partitions or complicated by compartments with lids or doors.
All elements are assembled into one structure, fixed with wood glue, and then additionally secured with self-tapping screws. Particular attention should be paid to the fastening of the handle - it must be strong and reliable.
You can independently assemble a tool box not only from boards; depending on the arsenal of tools, you can use plywood, chipboard, OSB, galvanized metal or sheet aluminum.
There is nothing difficult in making such a box, and the advantages of the product are obvious: the tools and fasteners will be in a certain place, at any time it is enough to take the box out of the pantry or garage and carry out the necessary repairs.
Reading time ≈ 5 minutes
A real owner always takes care of the safety of his instruments. Even a small set should be stored orderly and neatly. A skilled craftsman can assemble a container for tools and accessories himself. Below we'll talk on how to make a tool box with your own hands. The presented photos and videos will help in your work.
Externally, the box looks solid and stylish; it immediately declares a serious approach to the life of its owner. Its dimensions are (70x40x45 cm), that is, 70 cm wide, 40 cm deep, 45 cm high. This is quite enough to accommodate hand tools. The drawer has 3 pull-out trays, as well as a hinged top lid that opens up a spacious compartment. This box allows you to protect your tools from dust and organize safe storage.
Required Tools
To make a wooden box you will need the following tools:
- a circular saw;
- milling machine;
- grinder;
- clamp;
- hammer;
- wire cutters;
- file;
- wood hacksaw;
- chisel.
Step-by-step instructions for making a tool box
The optimal material for making the frame is oak wood. This is an excellent durable material that is durable and resistant to mechanical stress. It is better to take 19 mm thick glued slabs as a basis. This material does not have knots or rotten inclusions. Using a circular saw, cut a strip 38 mm wide.
To prevent the individual elements from moving relative to each other when gluing, a nail is driven a little into the first part, its head is removed with pliers, and then a second board is hammered onto the protruding sharp tip.
The boards are additionally coated with glue and fixed.
The glue that appears at the joints of the parts is removed with a chisel; you just need to wait for the glue to dry a little.
The result should be a part 38x38 mm. Its end is polished.
The edge must be cut strictly at an angle of 90°, so when cutting a part to the required length, we must not forget about the cut angle.
This technique will help ensure the accuracy of the cutting angle.
The location of each part is marked so as not to get confused during assembly.
A groove is cut in each part along its entire length; it must go strictly in the center.
The grooves can be made either using a stationary circular saw, or using a milling machine.
On the parts that are intended for the manufacture of vertical corner supports of the frame, transverse markings are made.
Another one is made in the rear corner parts longitudinal groove. It is not needed on the front corner support parts.
For subsequent fastening in the end part of the workpieces, you need to find the center, marking the point of intersection of the diagonals.
It is necessary to carefully check the compatibility of the blanks.
The workpieces are processed with a file.
Marks are made in the loosely assembled frame in order to subsequently lengthen the grooves.
The grooves are cut out with a hacksaw.
Use a chisel to remove all excess.
These blanks are needed for drawers. A corner is cut out from the end part.
Each workpiece is drilled for bolting.
Observing accuracy, you need to drill the prepared parts.
On the part intended for fastening and separating 2 drawers, cutouts are made at an angle of 90 °.
Having installed the parts for moving the boxes in place and fixed them, they gradually begin to screw them.
The corners of the plywood blanks are cut off, as in the photo.
The walls of the lower drawers are attached to sheets of plywood using self-tapping screws.
Prepared horizontal plywood parts are attached to one side. First, this is done without using glue.
When fixing with clamps, you need to check the diagonality so that the dimensions match.
Drawers are made of plywood.
The grooves can be cut either stationary saw, or using a cutter.
The drawer parts are held together with glue.
The sides of the drawers must have grooves for movement along the slats fixed inside.
For strength, the side parts are fastened with dowels, which are cut flush.
To ensure reliability when gluing, small nails are partially driven into the surface of the front wall of the drawers, and their heads are removed.
After attaching the front panels to drawers, look to see whether the individual elements are located evenly.
When gluing, extreme precision must be observed; there should be no gaps.
Finally, the top frame of the box is made from plywood.
To make an accurate cut at a 45° angle, it is advisable to use special tool.
The blanks for the frame are connected and fixed when gluing using a tension belt.
There is always something that needs to be fixed in the house. It could be a leaky faucet, a loose shelf, or a broken chair. Of course, for each of these actions a man needs a special tool. As a result, this leads to the accumulation of a large number of screws, hammers, wrenches and etc.
Where to put all the tools so that they are in one place and do not attract attention? Certainly, the best option will be the presence of a box for tools, which can be purchased in a store or made with your own hands.
What types of boxes are there?
Construction stores offer not only materials for repairs, but also special boxes, in which it is convenient to store tools in a compact form. If you don’t have the time or desire to make such a box yourself, you can easily purchase it at finished form. However, it would be much better to do it yourself.
A homemade box will be direct proof that a man is a jack of all trades and can easily cope with any task.
Before purchasing or making one at home, you should clearly determine the type of box that will be most useful. For this purpose, its purpose is determined.
Irregular use does not imply the presence of a sophisticated design. In this case, a simple box-box with one section is much better suited. There is another type - an organizer box. It is more suitable for men who constantly exercise repair work, whether at home or in the workplace.
To do right choice, you need to proceed from personal preferences. The choice of box depends on the man himself and his ability and desire to make something.
How to make a box with your own hands step by step?
If you decide to make a box yourself, then you need to have step-by-step instructions, including a sequence of actions. It will allow you to accurately understand how to make a tool box without any special financial and labor costs. Let's define the main stages of work:
Defining a Plan
This stage is very important, since the calculations obtained and the diagrams made will allow us to draw up a prototype of the structure. If a mistake or inaccuracy is made somewhere, the final product may differ greatly from what was intended.
To depict a box in the form of a drawing, use paper and pencil or a special program on a computer.
Materials for work
You should clearly understand what materials will be used to create the future tool box. They are divided into mandatory and optional.
The latter depend on the specific case, and mandatory group include measuring devices, fasteners, hammer, hacksaw, etc.
Manufacturing process
The main work that will determine the outcome occurs precisely at this stage.
Manufacturing work
To understand the specifics of how to make a structure yourself, we will give a simple example, which is shown in the photo of a tool box. The design is a box-box, which has a special handle for moving.
What is this box made of? Plywood, plastic or metal materials. Their choice again depends on the personal preferences of the master. As a rule, most people use conifers trees for making. It's all about their availability, high quality and ease of processing.
Let's look at the process of making a box box step by step:
- After a drawing is made on paper or a computer, it is transferred to the material that will serve as the basis for the design. That is, details are drawn on wood, plastic or metal with a pencil and then cut out with a hacksaw.
- The main elements of the box: walls (4 pcs.), bottom. The simplest tool box may not contain a lid.
- Once all the parts are cut out, they are connected with glue and wait for drying.
- After a few hours, when the glue has completely dried, the joints are additionally fastened with nails or self-tapping screws.
- Installation of the handle. A wooden slats are suitable for this.
By following these simple steps, you can have a great DIY toolbox.
The finished structure is additionally coated with a layer of varnish to give it a beautiful shine. appearance and protect the material from liquid ingress.
The presented box-box is considered the simplest, but at the same time very convenient. Following step by step instructions, even a beginner can make such a box with his own hands.
Of course, later you can make a more improved and complex model, but for the first experiment it is impossible would be better suited simple box.
DIY tool box photo
