Inventory storage. Order in the country: ways to store garden tools and other things (26 photos). Motoblocks and cultivators
Ecology of consumption. Homestead: If you feel like it's taking too long to find the right rake or you're just thinking about tearing down an old barn that's bringing more problems, than good, because everything is piled up inside it - it’s time to think about building a “proper” shed. And this is how he should be, and we'll talk Further.
If you feel that finding the right rake takes too much time or are simply thinking about demolishing an old shed that is causing more problems than it is worth, because... everything is piled up inside it - it’s time to think about building a “proper” shed. But how it should be will be discussed further.
And to begin with, it should be noted that a barn or other structure for gardening tools can not only fulfill its direct function as a banal storage unit - if you apply a little imagination, the “rake house” can even become a decoration for your garden plot.
Storage of "high" inventory
It makes sense to divide your tools into several categories and create their own small storage for each of them, based on their shape and purpose. For example, to store equipment such as shovels, rakes and other tools with long handles, you can make a tall and narrow shed, the dimensions of a telephone booth. In such a booth, its contents will not constantly fall on your feet (or on your head), but the necessary tool can be easily found right away.
You can make such a shed “from scratch” - from boards and pieces of slate for the roof, and then paint it in some bright, pleasing to the eye color. Or don’t knock it together, but “put together” a shed like a puzzle, for example, from four old doors. If at least one of them has glazing elements, you can inspect the presence inside the right tool without even opening the shed.
If you do not want to make storage for rakes and shovels separately, you should set aside a special place for them in a large shed, making special devices screwed to one of the walls.
In this option, you just need to create an individual mount for each existing tool. If the length and height of the wall allows you to place the entire collection, then you will definitely not lose anything else.
If you decide to make a longitudinal storage system, then (polyvinyl chloride) may be suitable as “pocket” holders. plastic pipe required diameter, sawn into required quantity parts. If you choose a transverse system (tool shafts parallel to the floor), then wood may also work.
But in general, if you have a plastic pipe, then you can use it to create a storage system for almost anything - from pencils, pliers and screwdrivers, right down to drills and screwdrivers.
Can also be converted to vertical plane storage and small garden tools (and, in principle, almost any tool). To do this, you need to drive nails into the surface of the wall and make hooks on which you can hang even coiled hoses. If inside the barn (in our weather conditions it is still better to store equipment inside) you have walls made of logs and therefore uneven, then you can use an inverted one as a flat base. wooden pallet, and attach the necessary hooks to it. Then, among other things, you can take out the entire structure for a while gardening work out.
Well, if you don’t want to do anything special, but have free pallets, then you can simply place the pallet vertically against the wall and use it as a stand, for example, for shovels. Just remember to make sure the structure is stable. You may still have to attach it to the wall.
Storing smaller items
To store bags of fertilizer or other items that you need a little less frequently, it makes sense to use plastic containers. This is nothing new, unless, of course, you decide to hang them from the ceiling. This will significantly save you valuable space in the shed. If the ceiling height allows, you can build special “rails” there and remove a lot from the passage.
This principle is also applicable for storing all small things - nuts, screws, nails, etc. To quickly find what you need, they can be poured into glass jars. And so that the lid of this jar does not get lost, screw it to the bottom surface of some shelf, or even the ceiling of the barn.
If there is a problem with small items getting mixed up, then you can build a special sorting box following the example of toys for very young children.
It is quite possible to combine several of the above ideas and make an outdoor, most compact mini-shed that will not take up much space and at the same time will accommodate what you need.
Garden work table
For various small garden and economic works like replanting potted plants or preparing fertilizer, you can build a table that will allow you to do everything comfortably without bending over backwards.
You can make it, like everything else, from scratch according to your own sketch, or you can build it from old bench, old table, pallet, used door. For greater convenience, install a piece on your desktop as a back wall metal mesh from the fence, on which you can, among other things, hang small equipment.
As you can see, you can come up with a lot of ideas - the main thing is to start. That's what we wish for you! published
P.S. And remember, just by changing your consumption, we are changing the world together! © econet
Join us on
Over many years of gardening, I have accumulated a large amount of various equipment for working with the soil. Became topical issue storage of garden tools in the country. I didn’t think about it before, I left shovels and rakes on the street under open air. But such an attitude towards equipment leads to early wear and tear. Then I thought about the storage location garden tools, furnished with your own hands.
Wintering equipment
Proper storage of garden tools in winter is a guarantee long service. Late autumn When gardening and vegetable gardening work comes to an end, prepare your tools for the next season.
Clean off visible dirt and grass, then scrub the surface with a stiff sponge. Fill the pitchforks and shovels with water with added laundry soap or dishwashing detergent and leave for 20-30 minutes. Wipe dry and leave to dry outside for 2 hours. Loose cuttings are strengthened with wedges or winding fabric. Samu wooden handle sand and varnish. This will help you avoid splinters and prevent the wood from splitting due to moisture. Complex instrument(secateurs, scissors), if possible, disassemble into parts, lubricate and reassemble. Dull parts must be sharpened and lubricated before winter to avoid rust. Store knives and sharp instruments in sheaths or sheaths.
Of course, it is best to build a miniature house for gardening equipment, which can not only become convenient place for storage, but also to decorate your site. But if this is not possible, then a garage or shed is perfect for storing equipment. The main criteria for choosing a room are dryness and ventilation. If you use a garage, pay special attention to the fasteners so that the tools do not scratch the car if they fall.
How to store the tool?
This simplest design has only one drawback: it is difficult to reach the instrument in the middle.
For storage of small tools sew a fabric or polyethylene organizer with pockets.
Such a device for storing garden tools will help you not to lose small tools (scissors, pruners, scoops) and necessary things (gloves).
Creative Storage Ideas
Choosing a place to store garden tools is partly a creative task. If there is a staircase leading to the house, you can arrange storage for large equipment under the porch, and make drawers for small items in the steps.
An excellent cabinet for gardening tools can be made from a bench.
And if you remove the railings and backrest, we get a comfortable lounger. Or a platform for plants. Or dinner table. Don't be afraid to fantasize! And then an inconspicuous toolbox will turn into a multifunctional, pleasing to the eye storage system.
Often people simply store things in the garage, in some room, in a shed. You can find everything there: gardening tools, old furniture, spare parts. If you leave this like this, you will need to spend a lot of time each time to find the right thing. Therefore, summer residents have come up with special storage methods that make life easier. This article talks about storing shovels and rakes in the country.
Wall mounting system
This is one of the most best options tool storage, as it allows you to place a large number of tools in a small area. It is distinguished by its simplicity, low cost, and great versatility. The wall-mounted device can be attached to the shed for shovels and rakes. The system consists of a net (sold on the regular market) and hooks on which equipment is hung. You can also make wooden holders and attach them to the wall.
Wall mount for tools
Garden tool toilet
Since the room is high, it is well suited for rakes, shovels, and hoes. You can also nail hooks to the toilet door, hang shelves on the wall, and put tool boxes. Household blocks are often used for these purposes.
If there are a lot of garden tools, then it is better to use traditional way- storage of shovels and rakes in the shed, where you can build storage cabinets, put baskets for small items or special ones metal constructions for heavier items.
How to store gardening tools
Storage lockers
If option with garden toilet does not fit, then you can make the cabinets yourself. The advantage of this option is that you can choose the number of shelves, their height, the presence or absence of hooks.
You can also make a locker on wheels, which will allow you to change its location without much difficulty. Everything you need to create a cabinet is purchased in specialized stores.
A rack for shovels, forks, rakes, cuttings is another storage option. The sequence of its manufacture:
- Nail the crossbars to two boards: one on top, the other on the bottom (the boards should be in the center of the crossbars).
- Make a bottom box to stabilize the tools in the cells.
- Nail supports from the ends to the frame and boards.
This stand for shovels and rakes takes up little space.
Tool cabinet
Baskets for small items
You can use drawers that are made from a single piece of metal. Nothing will fall out of such boxes, and if you add an inscription, it will be easy to find the necessary equipment. Mesh baskets are used for rags and gloves. Storage for small items can be a container for something (for example, a coffee can).
Advice! Tools and containers must be washed, cleaned and disinfected.
Durable metal structures
On metal shelves Heavy tools are stored, so it is best to use welding to secure them.
The sequence of creating a metal structure:
- Make drawings.
- Take care of the frame elements - ordinary corners.
- Cut out the frame elements using a grinder and then weld them. Don’t forget to check the right angles between the fasteners and posts.
- Make shelves from perforated or rolled steel (thickness - 1-5 mm).
- At the end of the work, clean the rack from rust and paint it.
It is better to place such a structure next to a solid wall, which would serve as a support and carry part of the load. Often a metal structure is combined with wooden materials to make it easier.
To Street furniture It didn’t take up much space; it was attached to the wall using brackets.
Note! Metal products do not rot or ignite, are most protected from chemicals, and humidity and temperature do not affect them.
Preparing a garage for a lawn mower and walk-behind tractor
The room should be room temperature(approximately +22 °C), humidity - no more than 70%. The device must be positioned so that the wheels do not touch the floor. The equipment must be stored in the working position, i.e. horizontally, otherwise it may be flooded air filter or an oil leak may occur.
It will be good if you cover the lawn mower (walk-behind tractor) with a cover made of soft fabric. Shouldn't be near chemical substances for cleaning, as their aggressive compositions can cause severe damage to parts. Old rakes and shovels need to be removed so that they do not fall on the walk-behind tractor.
Advice! A garage for a lawnmower can be made from a doghouse.
How to store shovels at the dacha
Tips for storing shovels and other similar gardening tools in winter:
- Clean off dirt.
- Dry in the sun.
- Sharpen the shovels and then place them in a bucket of sand.
- Lubricate cutting tools with oil.
Storage options country tools it turned out quite a lot. It is not necessary to call a specialist; you can do everything yourself. If you try, these structures will last a long time. Tips on how to properly store shovels and rakes will help save time and money, save appearance tools.
Over the years, every gardener accumulates a whole arsenal of all kinds of tools. And the question inevitably arises - how to store garden tools? And there are a lot of them - bayonet and shovel shovels, rakes, hoes, scythes, pitchforks, flat cutters... And all this is often more than one copy. And there are also plenty of small tools, such as pruners, all kinds of rippers, and spatulas.
We would like to offer to your attention a few ideas on how to organize the storage of all this inventory. The pictures clearly show how the storage devices are arranged, so there is no need for detailed explanations.
Conventionally, the approach to storing garden tools can be divided into two types - vertically or horizontally. But here everyone chooses according to their own taste.
Devices for storing garden tools horizontally
So, let's start with options for storing tools horizontally. The main structure resembles a Swedish wall.
Vertical bars with supports are attached to the wall, on which the tool is placed. The convenience of this design is obvious - everything is in sight, access to any equipment is very easy. The downside is that in the end the entire wall is occupied, that is, quite a large area is used for storage.
As a horizontal option storage of garden tools You can also offer this option (photo below). 
Storage under the ceiling is convenient and saves useful space.
Storing garden tools vertically
The device for vertical placement of garden tools looks somewhat simpler. You can also use a wall. 
There are many mounting options. From simple hanging to using tubes. The pros and cons here are the same as on “ wall bars" higher. Everything is in sight, good access, but it takes up a lot of wall space.
The option of storing garden tools in special device, resembling a box divided from the inside into sections. 
The design can be different, it can be clearly seen in the photographs below.
One of the disadvantages of this design is difficult access to the tools located in the center. You will have to pull it out from many neighboring ones, which may not always be convenient and can be fraught with injury.
Storage of small garden tools
So far we have been talking about organizing the storage of large garden tools, such as shovels, forks, rakes, etc. But there are also small spades, pruning shears and other “trifles”. Can you make it for them? small shelves
, holders (photo below). For more the same long-term storage 
It is recommended to use a container filled with sand with a small addition of vegetable oil. It is better not to use machine oil, since there is a risk of introducing it into the soil, and we do not want this. It is better to use linseed oil. Most often, a summer resident's garden tools take up the entire usable area
barn: “the storage space is meter by meter, and everything is filled with shovels, hoes and rakes - you can’t get through it.” Let's see how the most careful and organized FORUMHOUSE users have arranged the storage of shovels and rakes, trimmers and other devices.
DIY stand for garden tools
This stand is easy to make with your own hands. First, calculate how many bins you will need to store your shovels and flat cutters. Nail crossbars 40 centimeters long and 6 centimeters wide to two boards: one on top, the other on bottom. The boards should be in the center of the crossbars. Make a bottom box (it is needed both for the stability of the structure and for securing equipment in the cells). At the ends, supports and boards 70 centimeters high are nailed to the box and grille. If you are too lazy to make a stand, you can buy it: plastic racks for storing equipment with long handles various diameters
sold in many gardening stores.
All these stands do not take up much space, but they do take up some space. Therefore, many users of our portal prefer a different approach to organizing the storage of shovels and flat cutters: when some kind of special space, and the existing walls and ceiling are used. To do this, holes are made in all the cuttings and laces are tied to hang them on nails under the ceiling, special semicircular devices are nailed to the walls for storing hoses and extension cords, etc.
Stayer4x4 FORUMHOUSE user.
Moscow city.
I recommend mastering not only the floor surfaces, but also, if possible, hanging the tools on the walls. It is very convenient to lift bicycles through the block when storing them; you can also hang chainsaws on various hooks, garden vacuum cleaners, petrol and electric trimmers.
"Grip" for the trimmer
TigraOSP has figured out how to store a gas trimmer - a thing that is “very difficult to store.” His decision was prompted by the design of a shelf in a store: there should be a protrusion of two “rods” with a semicircle at the end, similar to a grip for a Russian cast-iron stove. A hanger in the shape of a grip was welded to the size of the trimmer, wrapped in a rubber hose to avoid scratches on the trimmer, and nailed almost to the ceiling.
TigraOSP User FORUMHOUSE
It hangs and is not noticeable, just classy. He came up, took it by the shaft, lifted it, took it out of the grip, and now it’s yours.
Organizers for garden tools
We will show you several examples of counteracting chaos, allowing you to keep garden tools in excellent condition for a long time, brought to life by users of our portal.
Pirmid built a barn and placed in it this special compartment with a separate entrance for entrenching tools and other small things for the garden. “After a futile attempt to fish a pitchfork out of a tangled pile, this design was born.”
na zzz also furnished small room for storage of gardening equipment and tools. The staples were purchased at a hardware store, the grilles, hooks and drawers were purchased at a commercial equipment store.
Now storing shovels in the shed on a hanger looks like this:
Here is another inspiring example - a hanger for shovels and rakes:
Niches made of PVC pipes
User FORUMHOUSE Limpopo offers this option for storing equipment: all garden “devices” are lined up in special niches made of PVC pipes.
Everyone liked the idea: simple, but so beautiful! But it's not that convenient. To insert a shovel or rake into such a rack, they need to be raised almost to the ceiling. At FORUMHOUSE, this know-how has been improved: a cut is made in the side of the pipe, which, by the way, will allow you to insert a tool with a handle on a handle into the rack. You can make something like a fastener: cut a strip from plastic bottle, fix one side of it motionless on the wall, and make a hole in the other. He put the tool against the wall - “fasten the loop into the nail on the second wall.”
Another idea, for the really pedantic, is to make recesses at the bottom, limiters from the sewer with a diameter of 50 millimeters, and place the tools not upside down, but with the working edge down. Then exactly, like a string, they will stand not only in the picture, but also in reality. By the way, you can try making such racks from plastic bottles.
Here's how else you can store any gardening tools on long cuttings in your dacha. The simplest do-it-yourself stand: two brackets, a string with a nail at the end is tied to one - an invention Anna Sokolova. The tools stand neatly in a corner, do not get underfoot, and are easily removed as needed. And most importantly, they take up very little space!
Small Tool Storage
It is convenient to store small garden tools in bags like these:
Or hang it on metal slats with hooks (they are more reliable and cheaper than plastic stands).
But this is simply brilliant design idea: small garden tools, all these shovels and rippers are suspended by the teeth of an old rake, which, in turn, are suspended on a nail driven into the wall.
Room for garden tools
In general, the storage system for garden tools greatly depends on the room. It’s one thing if you have at your disposal half a garage or a shed specially built for this purpose, and another thing if all you and your tools have is a corner under the stairs measuring one meter by one meter. “First, the premises, then creating beauty and convenience in the placement of the buckets, shovels, forks, rakes, etc. that we need,” they say at FORUMHOUSE. Yes, y Stella777 there is room for storing tools separate room– continuation of the kitchen, but with a separate entrance. Stella777 covered the walls with clapboard, varnished them, bought them at construction stores hooks and shelves and now has “order and a free approach to tools.”
Another important point: Before putting the instrument back, most FORUMHOUSE users clean or wash it. If you clean a shovel even after simply digging up the ground, wash the flat cutter under a tap or in a bucket of water, over time you will develop a wonderful habit of keeping your working tool in order.
We offer you our article about unusual but effective tools, a video about new products on the garden tools market, and a discussion on the topic: “garden tools: what to choose.”
