• Interior
• Window
• Walls
• Projects
• The buildings

How to lay laminate flooring in a long room. How to lay laminate correctly - lengthwise or crosswise: tips on choosing the direction, where to start laying correctly and the step-by-step installation process. Therefore, strict requirements are imposed on the foundation

Laminate boards reflect differently depending on the direction of installation. Moreover, the direction of the slats is important not only in relation to the location of the room, but also in relation to the location of the light sources. Designers claim that knowing how best to lay laminate flooring, you can create visual effects, increasing or decreasing the volume, length and width of the room. This can be achieved by correctly matching the modules with furniture and interior items.

The main directions for laying laminate

In accordance with the laying technology, there are three main directions:

• along the windows;
• across the windows;
• diagonally.

I combine the first two options into one, and call it direct laying of lamellas. Laminate flooring must be laid not only in accordance with technology, but also in accordance with creative ideas. If you need to visually lengthen a room, lay laminate flooring along the room. If the slats are laid across the room, you can achieve the opposite effect - make it shorter. In this case, designers advise installing diagonally. In this case, it is necessary to reduce the number of pieces of furniture to a minimum and eliminate any carpeting.

Laying laminate flooring diagonally is a very labor-intensive task. Real professionals can correctly calculate the angle of inclination. They also calculate and calculate the material that will be required 15% more than with transverse laying. With more simple version material consumption is 4% more than the area.

Which is better to lay: across or lengthwise?

Which direction will be the most correct? Each of these options is a direct installation method. In this case, the parts are installed parallel to the walls of the room. According to the rules, work should begin from the doors on the opposite wall.

Laying along the light line

This is the most acceptable option and is considered a classic. This requires a minimum amount of material and professional knowledge. Despite these features in finished form The laminate board looks great.

For installation, determine the longest wall of the room and lay material along it. With this approach sunlight, getting on the joints, does not give a shadow. The seams are practically invisible. As a result, a single, flat surface is formed.

This option for laying laminate is convenient in cases where the windows are not on long walls, but along short ones. If the sun's rays enter the room from both sides of the corner, this effect cannot be achieved.

Cross laying of laminate

In this case, installation is carried out relative to the long wall rooms. Laminate flooring is laid perpendicularly or across the room. In this case it is possible to achieve visual expansion. This is suitable for renovating hallways or narrow rooms in the house. When choosing this option, you must remember that cutting the boards will take much more time than with standard installation.

Which is better: along or across?

Knowing existing methods installation, you can choose the one that will help create comfort and comfortable atmosphere. If you have already decided what color, texture, and manufacturer of the laminate you will have, but have not decided in which direction to install, pay attention again to a few nuances.
There is only one window in the room. Installation of the laminate should begin from the far corner to the window. It is better to place the slats perpendicularly. The sun's rays will hide the connections, creating the feeling of a single canvas.

The windows are on adjacent walls. The main reference point in this case is the window that provides more light.
Be sure to model the future space. To do this, stand at the entrance and imagine where the pieces of furniture will stand, if it makes sense to do the labor-intensive diagonal installation or just make do with the usual longitudinal one.

Laminate laying technology

By selecting suitable way installation, you can start working. The installation technology process in any case consists of the same actions. To get started, you should prepare a set of tools and accessories.

• Tape measure and pencil;
• Hammer and hand saw;
• Jigsaw;
• Wedges for spacers;
• Beam, which is necessary for padding panels.

Most manufacturers offer customers laminate flooring with a modern clinker system. But in some places there are still solutions adhesive installation. This is a much more labor-intensive option, which is recognized as a thing of the last century.

When starting installation, start from the wall. Adjust the first row to the wall, connecting the slats with a tongue-and-groove system. The ridges on the wall side of the first row should be sawed off with a hacksaw so that they do not take up extra space. Leave a few mm of space between the mesh and the first row so that the material can contract and expand during use. In the second row, lay out the boards in a checkerboard pattern. The part that gets in the way can be removed using a jigsaw. The staggered arrangement of the lamellas increases the load resistance of the flooring.

After the second row is assembled, insert it into the grooves of the first. This work requires care and concentration. You will need the help of a second person.

Using a hammer and tamping block, carefully push the laminate floors closer together. Tap along the entire length of the row.

Start assembling the next row, maintaining the checkerboard pattern.

The gaps that remain along the walls are hidden using plinths or other decorative elements. Moreover, the plinth is always attached to the wall, and not to the floor covering, regardless of the direction of the slats.

Laminate is a functional and practical floor covering that comes in a variety of textures and colors. Those who want to change their floor covering often face actual question: how to lay laminate along or across a room?

The choice of installation method depends on some room factors. The following installation methods are currently used:

• Longitudinal;
• Transverse;
• Diagonal.

The longitudinal and transverse option is direct installation. Diagonal represents the most the hard way installation. If the choice is made in favor of the latter option, it should be borne in mind that the rooms should not be filled with furniture (both upholstered and cabinet furniture). Diagonal laying Suitable for rooms such as a corridor or hallway.

The direct installation method is the most common. With it, the elements are attached parallel to the walls. Work begins in the direction “from the door”.

Longitudinal laying

Longitudinal installation is recommended by craftsmen for any type of premises. The amount of waste during direct installation is minimal; the work does not require much time or special skills. The appearance of the finished flooring always looks beautiful and neat.

When the window is located on a short wall, there is no question of how to lay the laminate - along or across the room. Installation of lamellas is carried out relative to the long wall of the room. When the floor covering is illuminated with light coming from the window, the seams at the joints will not be visible due to the fact that there is no shadow cast. The canvas will create the effect of a perfectly smooth panel.

When placing windows on two opposite or adjacent walls, a similar effect cannot be achieved. Longitudinal laying is justified when laying inexpensive laminate flooring, as you can create a chic, stylish interior.

Cross laying

The placement of the slats across the room or perpendicular to a long wall is not as perfect as the first option. The advantage is the ability to visually expand the room. Can be used, for example, in narrow corridors or elongated rooms. The process will require a lot of time and money, since more lamellas will be needed and they will have to be cut more often.

Choosing a installation method

Having selected the texture of the laminate, color scheme and manufacturer, but doubting the choice of direction for the lamellas, you should take into account the following factors:

• The presence of one window in the room. Laying should begin from the far corner of the room perpendicular to the light opening. In this case, the sun's rays will be able to visually hide the seams and the coating will become perfectly smooth.
• The presence of two windows in the room different walls. You need to focus on the window that gives more light.

Before starting finishing with lamellas, you can stand with your back to front door into the room and imagine the arrangement of furniture. If you plan to install the floor in the entire apartment (house), you need to imagine what the overall finished picture will look like. All design features of the room should be taken into account. Then it will become more clear how to properly lay laminate flooring.

Sometimes the source of light is not windows, but chandeliers, Spotlights, wall sconces, floor lamps. Their light also needs to be taken into account when choosing the direction of laying the laminate. You need to be guided only by your preferences or desired effect.

Shapes and size of the room

Taking into account these parameters, you can make it easier to choose a laminate installation method. The proportions of the room change as follows:

Correctly proportioned rooms allow the installation of lamellas along a long wall in the direction from the window.

• In long and narrow rooms It is more expedient to use the transverse direction, it will “spread” the space.
• Complex proportions and irregular shapes will delight designers, but complicate the work of installers. In such cases, the diagonal direction is chosen. It is not easy to do such work on your own, without special training. If you have doubts about your abilities, it is better to entrust the installation to professionals.
• All other things being equal, in low rooms it is preferable to carry out longitudinal installation, while high ceilings prefer transverse installation.

Important! The direction of installation will not affect the quality of the coating in any way. You should take into account the fact that sometimes a special chamfer is made on the laminate to give individual boards visibility. If this particular type is purchased, then the joints will need to be emphasized and installation is carried out in reverse, perpendicular to the window.

Design Features

The presence of furniture in the room also needs to be taken into account. If the rooms are filled with furniture and the floor is covered with carpets, installation can be more economical. Minimalism in the interior and a relatively open large space of the floor should be emphasized by the direction of laying the lamellas and the issue should be approached more carefully.

When a new floor is installed on wooden boards, not sheathed with plywood, the slats are directed perpendicular to the location of the boards to reduce deflection. Plywood over the boards allows you to choose any direction of installation.

Installation nuances

Apartments in a new building and modern houses are built correctly, have beautiful, proportional, comfortable shapes. Old living quarters were often built with ceilings that were too high or too low. At the same time, the rooms could be so narrow that two single beds could not fit at the same time in width. The windows were sometimes located near the ceiling, and the apartment itself was half in the basement. To the owners of such “inheritance” general rules repairs are not always suitable. With the decision to carry out repairs, the problems of choosing the right and suitable options arrangement.

Such “inconvenient” rooms require a special approach:

• Excessively narrow and elongated rooms with a small window on a short wall can be visually expanded using the direction of the slats. But the main principles of orientation will not work here. The laminate is installed parallel to the window; the direction of the light will help to slightly correct the shortcomings of the room.
• Another case is low square room large area. The light source in this room will not play a special role. Longitudinal installation in relation to the exit, according to experts, will lengthen the room to a more aesthetic appearance.

The final decision on how to lay the laminate correctly - along or across the room - is made by the owner of the room based on the priority of his own expectations from the effect of the new floor.

Some features of the corridors

To determine how to lay laminate correctly - along or across, in cramped and elongated corridor aisles, you need to thoroughly study the properties flooring.

Straight corridor

Laminate helps to visually perceive the surrounding space differently. The corridor, in this sense, is a complex architectural space.

• The coating is quite durable and abrasion-resistant, which makes it possible to use slats for arranging floors in the corridor or hallway. A variety of colors makes the most difference complex tasks designers.
• If certain conditions are met, choosing the direction of installation will be a good move in changing the perception of the room:
• Not worth buying flooring too bright and flashy colors with a narrow pattern along the elements. It is advisable to choose wide boards with a pattern of the same tone. Imitation of ceramics is also quite appropriate.

• It would be correct to take into account the intensity of the equipped lighting and the characteristics of the lighting sources. Not all of them contribute to the appearance of joints between boards. The laminate delivered from the store needs to be placed on the floor next to each other and see how the light falls on them.
• Choice color scheme need to be thought through carefully. A dark floor will visually narrow the room, a light one will expand it.
• During cross-laying, short sections are not used at the edges to save material. This move will greatly reduce the strength of the floor.

Transverse laying of lamellas in cramped corridors is justified if there are large boards of the same tone with an evenly distributed texture. Boards imitating ceramic tiles, will fit even better. A narrow and elongated pattern located across the room will unbalance its perception without adding beauty. A single-color, small pattern can be laid lengthwise when the room ends with a window. How to lay laminate flooring relative to the window was described above.

L-shaped corridor

In L-shaped rooms, slats should be laid diagonally or in a herringbone pattern. This will create a beautiful, unusual pattern and will not allow you to narrow the space. The diagonal is tolerant of coating textures; you can choose the laminate you like. And boards of a lightened shade, mounted diagonally, will create the most harmonious perception of a narrow corridor.

The only negative is the large amount of waste.

Laying depending on the type of lock

The connection of laminate tiles has four adhesion options:

• Adhesive;
• Castle.

Castle, in turn, is divided into:

• Click;
• Lock.

The click system (collapsible lock) is easy to assemble and lasts a long time. The clutch provides minimal clearance. The lamellas are assembled like a chess set, with constant displacement of the end connections.

Lock system (more economical option) is mounted with the boards parallel to each other, their adhesion occurs through special end grooves.

Important! Glue method will reliably protect the joints from moisture getting inside, which will extend their service life. Glue systems cannot be disassembled, unlike lock systems. Subsequent dismantling will not be possible.

Any types of locks and boards (including deck boards) are suitable for direct installation. It is more advisable to place the lamellas diagonally with locks that can be connected at an angle of 450. Also, a special board is needed here; deck boards cannot be laid this way. You can also use standard laminate. The diagonal can be laid out in a herringbone pattern or in an English stitch.

Purpose of the premises

Some rooms in the apartment are closed to outsiders. These are residents' bedrooms and children's rooms. It is not advisable to choose complex installation solutions; a direct arrangement of lamellas can be used here.

Passage areas, storage rooms, balconies can also be equipped with longitudinal or transverse arrangement of boards.

Laying laminate flooring diagonally from the window has an aesthetically attractive appearance and is used in rooms such as:

• Study;
• Front;
• Living room;
• Hall.

It is not advisable to lay laminate flooring in bathrooms and toilets, unless they occupy a large area.

Video

Photo gallery (47 photos)

It's no secret that the styling of modern laminated coating accessible to most of us even without practical experience. The only question that beginners may have before starting work is how to lay laminate along or across? There are several opinions on this matter, and about them we'll talk in the article below.

The photo shows a diagram of the direction of laying the laminate

The principle of laying laminated floor slats

1. Installation is carried out only on a flat surface. The installation instructions require that its difference should not be more than 5 mm;
2. For some types of laminated flooring, it is necessary to install an additional waterproofing layer of waterproof film. At the same time, the installation price will, of course, increase;
3. The subfloor must first be cleared of debris and wiped dry;
4. When installing a laminated coating with your own hands, do not forget about the special backing. Its thickness should not be more than 5 mm; for lamellas with a thickness of 8-12 mm it should be 4-5 mm.

Advice: the installation method depends on the class of coating.

How to connect laminate slats

There are several clutch options for this:

1. Glue method;
2. Castle method:

• Click;
• Lock.

Tip: If you don’t know how to lay laminate flooring lengthwise or crosswise, use professional advice– observe the natural light in the room during the day.

Laying the laminate along or across depends on the location of the daylight source. It can be a window or an artificial light source in a windowless room (corridor, hallway, closet).

This is due to the fact that artificial or sunlight, when it hits the floor, which is laid perpendicular to it, illuminates the joints of the laminate boards and the floor may lose its attractiveness.

In this case, all connections of the lamellas to each other will be clearly visible. Therefore, it is best to lay the laminate along the light source in the room.

Tools for installing laminate flooring

• A jigsaw or hacksaw for metal, a saw for wood will not work, as it has too large teeth that can ruin decorative coating slats;
• Metal ruler;
• Large scissors, such as tailor's scissors;
• Sharp knife;
• Nails;
• Rope or fishing line;
• Wooden wedges, bars;
• Pencil;
• Square;
• Rubber hammer.

If you don’t have a rubber one, use a lightweight regular hammer. Strike the ends of the lamellas only through the gasket.

Features of laminate installation using Click-locks

To assemble laminate boards, a system of snapping lamellas is often used, which consists of prefabricated locks. The mechanism is durable and resistant to mechanical stress.

The system is easy to install and has a long service life. This method the coupling of the lamellas guarantees a minimum gap between them, although even this is visible if the direction of laying the laminate in the room is perpendicular to the artificial or daylight source of light in the room. So keep an eye on this if you want the flooring in your room to look beautiful.

Laying sequence

1. Measure the width of the room. At the same time, take into account the thermal gap of 8-10 mm near each wall, so you can create a “floating” structure. If the room area exceeds 12 m2, the distance between the slats and the wall is calculated as follows: 1.5 mm per 1 m of room length.
2. Calculate the width of the lamella in the last row along the wall.
3. Start installation from the far left corner. Lay the slats with the protrusion towards the wall.
4. Let's determine in which direction to lay the laminate. Lay the slats along the room's lighting source, securing them at the end using the locking method. In this case, the connection of the next row should be offset by 300-400 mm from the previous one. This way you can evenly distribute the mechanical load on the floor.
5. Connect the lamellas at an angle of 45˚, gradually lowering the laminate board until you hear a click, which indicates the completion of the process.
6. Observe the subsequent installation, arranging the lamellas in a checkerboard pattern, with offset end connections, while not forgetting how to correctly lay the laminate along or across, taking the light source as a guide.

Tip: If necessary, cut laminate boards to the desired width or length.

Features of installation of Lock-locks

The sequence of laying laminate boards with the Lock system is no different from the click fastening system. The only thing is that the lamellas must be parallel to each other, and their engagement with each other occurs using special grooves at the ends. Do not forget in which direction to lay the laminate, focusing on the direction of the light source in the room.

Features of the adhesive method

The main advantage of this method is the reliable protection of connections from moisture. Thus, the service life of the coating is significantly extended.

Before laying laminate flooring, let's find out its disadvantages:

• complex installation;
• glue costs;
• the panels cannot be disassembled after installation if you want to move them for installation in another room;
• adhesive laminate is not used for heated floors.

When installing, water-repellent adhesive is applied to the ends of the flooring sheets.

The lamellas are connected according to the “tongue and groove” principle.

Advice: do not skimp on glue, and never use PVA. It is based on water, so it can cause swelling of the coating, which will compromise the integrity of the connection.

1. Remove any remaining glue using a damp rag.
2. After laying 3-4 rows, not forgetting in which direction to lay the laminate, wait 2-3 hours.
3. Then continue laying the surface until the end.
4. Use a crowbar when laying the last row. Work with it carefully, without damaging the slats and the wall.

Tip: make a paper template in advance if the floor will abut heating pipes.

Cut all the necessary holes with a jigsaw. Do not forget about the thermal gaps between the lamellas and the wall, lamellas and door frame. To do this, use special spacer wedges.

Tip: After installation is complete, remove them and hide the gaps under the baseboard. Attach the latter to the wall, but not to the floor.

It should also be said that installing laminate flooring on adhesive based complex and time-consuming work. If you have no previous experience, it is better to leave the installation work to specialists. Do not forget that this option for attaching lamellas does not involve dismantling the floor in the future.

A few more secrets

1. Always lay laminate with the long side aligned with the light source.
2. If you want to visually expand a room, for example a corridor, where there are no windows, you can lay slats across.
3. If you know how best to lay laminate flooring, then use the laying direction depending on the individual characteristics of the premises, as well as their design. The main thing is that the light source should not contribute to the casting of shadows between connections.
4. Slats laid perpendicularly increase the width of the room, and lengthwise - increase its length.

Conclusion

The article described in detail how to lay laminate flooring along or across a room, as well as what influences this. Then the joints between the lamellas are not noticeable, and the coating looks impressive and beautiful. In the video presented you will find additional information on this topic.

Laminate manufacturers emphasize in their advertising campaigns that the installation of this popular floor covering has become so simple that anyone can handle it. Who has no experience working with laminate at all. You need to read the instructions, watch the company’s advertising video, and as a result of your efforts, the room with the new floor will quickly be transformed, and the admiring family will extol your construction achievements. Despite the fact that before installing the flooring, your success in this field was not much different from the ability of one of the characters of the English writer Jerome K. Jerome Uncle Podger to hang pictures.

Indeed, improving systems lock connections panels greatly simplified the installation process. If laying laminate flooring with a Lock lock requires certain experience and skills, then the next generation of locks - Click - does not impose such requirements. And the market already sells laminate flooring with 5g and Megalock locks, and even with aluminum locks. Soon everything will be like in Russian fairy tales, when all you need to do is bring the packages into the room where the installation will take place, and hold the flooring without opening the boxes for a couple of days. To adapt to the temperature and humidity in the room. And then you open the packages, and the panels themselves are laid “at the behest of the pike.” However, the devil, as we know, is in the details.

Laying laminate

The work of installing the flooring has become much easier. The same cannot be said about preparing the base before laying. The base must be level, stable and dry. The difference in height is permissible within 2 mm per 2 m. In some cases, a waterproofing device is required before laying the substrate and the laminate itself.

Laying the substrate

Substrates differ in the material from which they are made, characteristics and cost:

Manufacturers claim that the substrate is able to level the base under the laminate. This is an exaggeration. The substrate must provide heat and sound insulation. The underlay can compensate for minimal unevenness in a leveled old wooden floor or plywood base, but no more.

Important! The substrate is laid end-to-end, the joints are fixed with tape. This way it will not move when laying the laminate.

Choosing a installation method

We determine the method of laying the covering: diagonally, perpendicular or parallel to the light (along or across the room). Diagonal mounting is most often used in narrow rooms- this is one way to visually expand them.

It is usually customary to lay the laminate perpendicular to the light source (the long side along the flow of light) - this is a window in the room. In daylight, the joints between the panels are less noticeable.

However, when laying the covering on a wooden floor, you must be sure to focus on the direction of the floorboards. On such a floor, the laminate is laid perpendicular to the floor boards to reduce possible deflection. If the old wooden floor is covered with plywood on top, the flooring should be laid traditional way- perpendicular to the window.

In small narrow rooms without natural light (corridors, hallways), laminate flooring is laid across in order to visually expand the room.

Laying laminate flooring with different types of locks

For installation work you will need:

First, plastic wedges are installed to maintain a 10 mm gap between the laminate and the wall. The first row is laid horizontally from the corner of the room in the direction from left to right. The ridge of the panels of the first row is directed towards the wall. The panels are connected at their ends. The last panel in the row is cut with a jigsaw or hacksaw and laid in a row. You can start the next row with the remaining piece of the panel (provided that its length is more than 300 mm). It is important that the seams in adjacent rows do not match.

Advice. To give panel offsets a more accurate appearance, a technique such as “offset by a third of the board” is used. One third is cut off from the new panel, after which it is laid.

The first and second rows are joined. When using panels with a Lock-lock, you will need to hammer them with a mallet (through a die) to fix the ridge in the groove of the adjacent panel.

Click system panels are laid at an angle of 45° until they click into place. This coating can be disassembled if necessary.

The panels of the last row will most likely need to be cut to width. Remember that the cutting line will be covered by the baseboard, so small unevenness in the cut area is not a problem. After laying the laminate on the wooden floor is completed, the wedges are removed and the baseboard is installed. First, see how much you need to trim the panels of the last row. The flooring will not look very good if the width of the panels of the first and last rows is very different. In this case, it is better to trim the panels of both the first and last rows.

Modern floor coverings are distinguished by their availability and diversity. Laminate flooring in stores is presented in a wide range: various manufacturers, colors, wide price range. The choice is not difficult to make, the main thing is to decide on your capabilities and desires. The difficulty arises later, when it becomes necessary to lay the purchased coating and decide in which direction to lay the laminate.

Laminate board arrangement diagram.

Calling specialists to do the work will cost a lot of money, so you will have to find the time and opportunity to update the floor yourself.

A little about the composition of the laminate

Laminate is a multi-layer floor covering that is resistant to short-term exposure to moisture, sunlight and small physical activity. The thickness of the panels can vary from 6 to 12 mm, the length and width can also be different and are selected depending on the size of the room and the desired pattern.

Laminate installation options.

Defence from external influences is achieved thanks to a durable film that protects the panel from moisture and damage. The quality of the laminate as a whole and its cost depend on the thickness of the coating.

Under protective layer located on paper, with a certain texture or image. The colors can imitate any natural surface, including stone, wood, sand. The main layer with the greatest thickness is fiberboard and resins.

The thicker and denser the fiberboard, the thicker and better quality the laminate.

Laying laminate flooring yourself - choosing a direction

Before you start self-installation laminate, you need to prepare the base. Preparation includes clearing the room of furniture, removing old coverings and clearing away debris.

When the room is ready, you can purchase the material and leave it in this room for one or two days, during which it completely adapts to the humidity and ambient temperature.

Any surface, including wood and concrete, is covered with a backing made of cork or polyethylene foam, which serves as heat and sound insulation, making the laminate soft and free from squeaking when walking.

Related article: Brick home stove

In which direction to lay the laminate is a rather controversial and ambiguous question. For example, if the room has one window facing the sunny side of the house, then installation begins from the window towards opposite side rooms, that is, along the sun's rays. This method of working allows you to reduce the visibility of joints and make the floor almost seamless by reducing the shadow strip.

It is necessary to lay the laminate in the direction of light falling from the window so that the joints of the panels are not noticeable.

Also, the direction may depend on the method of fastening the laminate panels.

A snap-lock connection is the interlocking of panels by clicking into place. This type requires careful preparation and measurement; if you make a mistake, it will be almost impossible to separate the panels.

It is advisable to start work from the far corner of the room in relation to the door, regardless of the location of the windows. Any type of coating is laid with a gap of 1 - 1.5 cm so that when temperature and humidity change, the material can freely increase and decrease in size.

1. First, the first board is placed on the floor, then the second one is snapped to the end of the previous one, and so on until the end of the wall towards the door.
2. Subsequent rows are mounted with a shift of half a board. That is, if the first row was intact, then at the beginning of the second row a laminate board sawn in half is laid. The second row of panels is connected again with the end side. This creates two long panels.
3. Only when the boards are interlocked along their entire length can they be joined into one whole. The first row rises slightly, connects to the second along its entire length and snaps into place. It is better to carry out the work with two or three people, this way it will be convenient to lift the entire row at once, and you can achieve a minimum gap.
4. So, row after row is laid in a checkerboard pattern until the floor surface is finished. The last row can be difficult if the board is not the right width. In this case, you will have to saw all the panels lengthwise, which is unprofitable from an economic point of view.

Related article: Square living room interior

Some features of laying laminate

Layout of symmetrical laminate flooring.

If necessary, the tongue-and-groove fastening can be disassembled and moved to a new location. The connection of the elements occurs with the help of milk, with which they break through to each other for strength and tightness of fastening.

Adhesive locks are connected using glue and have an undeniable advantage: moisture resistance due to the glue getting into the seam. Disadvantages include the length of work and extra costs. Disassembling adhesive locks is impossible, so you need to carefully check your actions and think about every step.

If you have a heated floor, then use this on top of it adhesive composition unacceptable, as it may emit a pungent odor when heated. The laying technology is simple: the ends of two boards are coated with glue and connected to each other. Special glue is required without moisture in the composition. Apply in small quantities along the long and short sides of the panel, which will be combined with the previous ones.

It is better to start laying the laminate from the window in the direction of the sun's rays. This way, the joints will not stand out against the background of the floor, and with adhesive joints, the seams can turn out to be quite large, especially if there is no experience in this field.

The direction of laying the laminate can be absolutely any, including from a corner. Your idea or the thoughts of a designer have the right to be realized. The diagonal direction can increasingly be found in modern houses and an apartment. This technique is used to give the room a visually altered shape or to expand the space. Laying laminate flooring from corner to corner is a complex process, and it is better to entrust it to professionals.

In any case, the main criterion when carrying out work is to connect the boards together as tightly as possible. Whatever direction you decide to lay the laminate, long-term operation floor covering, even with thorough cleaning, debris gets into the cracks, as well as moisture, which further expand the joint and damage appearance premises. The denser the panels are placed, the longer the coating will last.