Tables for a children's room. Table for a children's room - features of choosing, combining and using a children's table (80 photos). Corner desk
This article is intended primarily for parents, so that they can make the right purchase choice. desk for your child.
This article also contains a selection of tips and reviews of photos of a children's desk.
Features of choosing a table for a schoolchild
When choosing a desk for their child, many parents pay attention to the two most important points, this is the cost and size of the product. However, do not forget that the most important priority when choosing a children's desk is its convenience and practicality.
At the same time, it is necessary to remember that a desk can perform not only its main function, but also an additional one - decorative, and just as it can harmoniously fit into the interior of a children's room.
Therefore, choosing a desk for a child’s room is not the easiest task; this moment should be approached with full responsibility and care.
Correct seating at the table
From technical parameters and the characteristics of the table largely depend on the health of the child. For example, a child should have correct posture and position at a desk; in a sitting position, the load on the neck, spine and back should be evenly distributed. All these requirements must be met for every desk without exception.
However, when choosing a children's desk, parents need to pay attention to some technical characteristics of the table:
- table height
- table top length
- tabletop width
- table lighting
- compactness and convenience
At the same time, most parents prefer a universal desk “transformable table” that can change their technical dimensions. This is certainly very convenient, since as the baby grows up, parents will not need to buy a new desk for their child again.
Such a table can serve a child almost until the child grows up.
Comfortable ergonomic chair
Having a good desk, you need to supplement it with another necessary element This good chair, on which the child will sit at the table. A chair, just like a table, must correspond to certain technical specifications and requirements.
Therefore, many parents buy their children large and easy chair believing that on such a chair their child will be able to have correct and healthy posture, but this is not the case. The fact is that a soft chair cannot fully support the child’s correct posture, and besides, the child’s curve in such a chair will not be even.
Therefore, it is necessary to purchase a regular right chair with a backrest that can match all the anatomical features of the child.
Child table material
Most parents prefer desks made from chipboard only because of its low cost. However, it must be remembered that this material contains toxic elements that can harm the health of the child.
At the same time, chipboard has a low service life, which means that in a few years you will again be looking for another desk for your child.
The most good material The desk is made from natural wood, but not all parents can buy such a desk. However, as an alternative, you can buy a table made of MDF; such a table will be slightly inferior in quality to a table made of natural wood, but its cost will be significantly less.
Table functionality
Equally important when choosing a desk is its functionality and practicality. In other words, this is an addition to the table of various additional elements: various drawers, shelves, racks.
It is necessary to clearly think through the purpose and application of each element, and use them rationally.
Types of desks for children
All desks have different shapes and parameters, and this greatly contributes to the child’s comfortable position at the table, as well as rational use room space.
Classic rectangular table
This type of desk is considered the most common, having the form school desk. At the same time, its technical dimensions and dimensions are small; such a table can be placed in almost any room.
Computer desk
It is clear that a table of this type is intended more for studying on a computer than for doing schoolwork.
However, there are models computer desks With additional functions, for example, a special pull-out panel for writing, various shelves for books and textbooks. Such universal table can become a good and comfortable learning place for a child.
Corner table
This desk option is the most popular among many parents. It can fit well and harmoniously into absolutely any room, without taking up much space.
Thanks to the large number of different shelves and its configuration, such a table can be equipped not only with school supplies, but you can also install a monitor and a system unit, you can also install a small TV.
Transformable table
The model of this table has an unusual feature: it is able to adjust all the main dimensions of the table as the child grows older.
This is in a good way save money, since the service life of such a table can be much longer than when the child finishes school.
Loft bed
In this case, space is saved due to the fact that the bed is located at the top while the place for doing school lessons is located at the bottom.
This option is most relevant for parents who have two children. school age.
Photo of a children's desk in the interior
Every parent, when arranging a room for their beloved child, wants to achieve the most comfortable and safe result. Particular attention in this process It is worth paying attention to choosing a desk at which the child will spend a fairly large amount of time. Exactly from correct selection Both the child’s performance and his health depend.
A children's room with a table must be comfortable and reliable for its little owner.
Requirements for writing desks
The body of young children is very sensitive to different kinds substances. Often, from low-quality materials, children develop allergic reactions. Therefore, when choosing a table for a room, be sure to carefully pay attention to its quality and safety.
The selection criteria are determined by the following parameters:
- quality indicators of the materials from which the furniture is made - products must be non-toxic and harmless;
- structural strength - this is important for the safety of the child; the table top and legs are chosen to be strong so that the product is stable;
- the model should not have sharp corners that can damage and injure the child;
- Countertop coatings are subject to special control. Here you should pay attention to the content in paint coatings formaldehyde and other harmful substances;
- All surfaces of the product must be smooth, without joints or curvature:
- The material of the fittings is selected to be durable and safe.
In addition to functional and design indicators, it is important to choose the right color scheme products. According to psychologists, preference should be given to calm and light shades, which will not have a stimulating effect on the child’s psyche.
It is also important to choose the correct size of the model. The physiological development of a growing organism depends on this indicator. The height of the structure is selected based on the height of the child. The tabletop in the correct version is at the level of the child’s elbow when he is standing near the structure.
Also, when sitting at the table, the baby should have enough space to place his legs. Knee joints cannot rest against the tabletop, and legs should not dangle in the air without support. It is considered optimal to have dimensions of 45 cm in depth and 50 cm in width.
It's good if you have a choice desk furniture the child will accept the most direct participation. Choosing for yourself best option, the baby will be able to spend time with it with pleasure.
Selecting furniture by age
Depending on the age and psychological development of the baby, the model and characteristics of the desk furniture will be different.
Preschool age. Your child will need his first table at the age of two, when the need for drawing, modeling, and assembling construction sets appears. The types of preschool tables are represented by play tables - for spending time with toys and guests, and preparatory tables - reminiscent of a small desk. The main selection criteria: lightness, safety and friendly appearance.
Children of primary school age. For older first-graders, a comfortable table is chosen to make doing homework comfortable. Selection criteria: height of the structure, shape of the product (if there is enough space, it is better to purchase rectangular specimens), availability of places to store school supplies.
For high school students, the desk is not only a place to write homework, but also the area where the computer will be located. Therefore, the model chosen is spacious, with shelves and a cabinet. The external design of the product should be interesting and stylish.
The main selection characteristics for a teenager or student are the functionality and external qualities of the product.
Types of furniture groups for writing
Modern manufacturers present their consumers with a huge selection of furniture configurations. Judging by the numerous photos of tables for children's rooms, the products differ in shape, placement method and design parameters.
Corner table for a children's room - it can be placed in any corner of the room that is not occupied by anything. Often such items are supplemented with shelves and cabinets in which all the necessary things and books will be stored. This option is perfect for a small apartment.
Work surface rectangular shape– a comfortable and roomy model with shelves and a bedside table.
Furniture items with adjustable legs and a table top - this model will grow with the baby, so it is an economically profitable purchase.
Transforming specimens are good because they can be used in disassembled form only if necessary. The rest of the time they take up little space, saving usable space for other things.
A set with a couple of places to work, represented by a table in a children's room for two. Such models can be corner, adjacent or located opposite each other.
A computer table is usually only suitable for working at a monitor. Some models have an additional retractable surface, but this is not always convenient for writing.
Modular design in the form of a table and a bed. In the presented type workplace is located at the bottom of the structure, and the sleeping area is at the top. Additions include cabinets and shelves.
Places for arranging desk furniture groups
Proper placement of your writing table is the key to good health. It is this factor that affects the development of vision, as well as work productivity.
The advantages of this method of placement are:
- saving space and energy indoors;
- natural light source;
- the opportunity to relax while watching the scenery outside the window;
The downside is the high brightness of solar flows. In addition, drafts with this arrangement are contraindicated. Yes, and during the heated period the child should be at such a table for a long time not recommended, because oxygen circulation near the battery is minimal, which can cause headaches.
However, there is still a solution. You can reduce the brightness of solar flows by placing the right curtains on the windows. Decorative dampers are also installed on heating radiators. Sometimes this may be the back wall of the table.
A window sill table in a children's room looks very stylish. The advantage of this type is that this model allows you to save square meters area. However, it will no longer be possible to place it on the window flower pots and long window curtains.
Placing a writing table along the wall is a classic. Its shape here can be either rectangular or angular. On a positive note in this case, it becomes possible to place many shelves for storing things on the wall surface. The disadvantages of wall placement include the lack of lighting, which is compensated by installing a high-quality lamp.
Modular corner system, which includes a writing area and a sitting area, this great option, allowing you to save space in the room. However, over time, a small table will become too small for a growing student, so you will still have to purchase a larger model.
When it comes to materials for making desk furniture, there are several options. The cheapest is plastic. As a rule, small specimens up to 45 cm high are made from it.
The most reliable and durable is natural wood. However, the cost of such furniture will be quite high. Optimal ratio prices and quality are specimens made from chipboard.
In addition to a high-quality work surface, it is also important to choose a comfortable chair for your child. It’s worth stopping your gaze on soft specimens that can maintain the correct curve of the back and shape your posture.
Photo of tables in a children's room
28.05.2017
One of the most important principles of a child’s development is the arrangement of his workplace, where the student can complete homework assignments, engage in creativity (drawing, modeling, appliqué) and his favorite hobby (embroidery, puzzles, construction sets). That is why caring parents so carefully choose a desk for the children's room.
What should you pay attention to?
Before you buy a ready-made study table or order custom size, you need to figure out what it should look like, what elements are best to equip it with, what shape and size are most suitable for children, and what furniture fittings exist to help arrange the workspace.
1. Height, slope and other parameters
For children of primary school age, you should purchase desks with an inclined table top. Height adjustment of the work chair is also important. This will help maintain your baby’s posture and teach him to correct position body, arms and legs while writing.
The maximum height of a desk for a schoolchild is 75 cm. The depth of the tabletop is not less than 55 cm. The minimum width is 100 cm. A tabletop that is one meter wide is quite acceptable for implementation. homework. But if you plan to install a computer and additional creative activities for the child, it is better to buy a structure equipped with a tabletop of approximately 60 x 130 cm or more.
The distance for the legs between the tables or legs should be at least 70 cm. A larger width is allowed, but a smaller one is undesirable, since the child will constantly experience discomfort and his movements will be constrained.
If you intend to hang additional shelves, cabinets and racks, then their height should not exceed 210 cm. It is important that children can freely reach top shelf without resorting to the help of parents and without putting yourself in danger using a stool.
2. Material
Most modern models are made of laminated chipboard, since this material has an affordable price, decent quality and wide choice colors
The second place among the materials used is natural wood. Solid wood is more expensive, but at the same time it is absolutely environmentally friendly, easy to process, and can be restored. From natural material can be made various shapes countertops.
MDF is a wonderful alternative to both solid wood and chipboard. A work station made from this material is bright, beautiful, has rounded ends, and is environmentally friendly. The shape, color and size of such products can be absolutely any.
3. Functionality
Tip: it is recommended to equip drawers that are too wide with jumpers. In such an organizer you can conveniently place school little things - writing instruments, office supplies, notebooks, etc. For these purposes, you can use ready-made trays or partitions made of chipboard, fiberboard.
Hanging shelves. The distance between shelves should be from 30 cm (for textbooks) to 40 cm (for tall folders, encyclopedias, non-standard printed publications).
Tip: Although shelves without side bars look modern and attractive, they are not always suitable for storing books. Therefore, if you want to buy open shelves large enough - consider purchasing special supports that will prevent textbooks from falling off the shelves.
The range of furniture for a children's room is so wide that when choosing a decent option, you can get confused. Therefore, you should always take into account not only the wishes of the child and your requirements, but also the age of the student and his hobbies. Also important factors in the purchase are the dimensions of the room and the style of decoration of the room.
1. Corner desk
- increased working surface;
- the ability to install computer equipment without compromising the space for study;
- ergonomic shape;
- variability of filling with additional elements (shelves, racks, cabinets, wall cabinets).
2. Straight models
A rectangular tabletop is considered the most versatile. Such tables can always be installed under any wall, under a window, and even in the middle of the room (for example, if the room is located).
3. For two
Different from ordinary products only because they are equipped. Often similar designs they make them corner, or simply connect two tabletops, installing a cabinet with drawers in the middle.
4. Table-window sill
Often parents try to use every free centimeter in the room to make it as deep and wide as possible. work area to your baby. - a wonderful alternative.
- the tabletop must be moisture resistant;
- all open ends should be treated with sealant;
- during installation it is better to use adjustable legs;
- trimming the upper part of the structure must be done “in place” so that the tabletop fits clearly into the window opening;
- It is not recommended to install closed cabinets in the battery area - it is best to limit yourself to a horizontal jumper or several open shelves.
It’s easy to make a window sill table yourself. The main thing is clear measurements, correctly selected material and furniture fittings.
5. Simple design with metal legs
A workspace for a schoolchild is not necessarily a full-fledged desk with a large number drawers and shelves. Sometimes it is enough to buy or make a basic structure with your own hands, which can then be supplemented with shelving, mobile cabinets, sliding stands for system unit, hanging shelves.
From a wide variety furniture fittings It is quite possible to use not only the usual round legs, but also square, oval, and also special metal supports.
6. Folding (folding) option
A worthy replacement for a full-fledged workplace that needs to be arranged in a small room, in one-room apartment, on the loggia or on the balcony. The main advantages are small size, quick folding/unfolding, budget price, the possibility of self-production.
Auxiliary furniture that helps set up a student’s workplace includes:
1. Rack
Standard shelving is equipped with shelves for books, textbooks, magazines, and notebooks. They are often installed closed facades or glass doors.
2. Wall shelves
Usually these are 2-3 open shelves used for storing books, oversized collectibles, souvenirs, photographs and other things. The most important thing in suspended structures- shallow depth and light weight.
3. Shelves on the countertop
This design is stable and reliable, it can be used for a large number of books and other things. The only negative is that the shelves installed directly on work surface, “take away” useful space. But if the lower part of the structure is not used for its intended purpose, the depth of the desk will remain the same.
4. Hanging cabinets with fronts
An excellent option for maintaining order in the student’s workplace. Partially covering the shelves with doors looks harmonious, helping to hide the chaos of children's things behind the facades.
5. Cabinets on wheels
Comfortable, multifunctional furniture, used both for storage stationery, extra seating and small coffee table. The mobile cabinet does not clutter up the space and can always be rolled away to the far corner of the room.
Another interesting life hack - soft upholstery the top of a mobile cabinet on wheels, which can be used as a chair.
A properly equipped student’s workplace is the first step to good study, to the ability to organize and plan. free time, to accustoming oneself to order in personal belongings. The independence of the child and his ability to live in the adult world depend on how parents were able to correctly, ergonomically and aesthetically attractively design a place to study.
1 ratings, average: 4,00
out of 5)
Real photos of children's rooms:
Post navigation
The child's room should have several functional zones. Baby spends here most of of his time, so he needs a place to sleep, play and study.
Tables and chairs for children differ from adult models not only in size. Each of the objects surrounding the child should be multifunctional. At the low tabletop you can not only draw and color pictures, but also learn your first letters and numbers, play with dolls and receive guests.
How to choose suitable tables and chairs?
When choosing specific products, you need to decide on a number of important characteristics. Furniture sets differ in several parameters.
- Purpose: dining tabletops with stools, suitable for children's parties; furniture for creativity and activities; full-fledged desks with boards and many additional compartments where notebooks, writing materials, chalk, and pencils are stored.
- According to the configuration. Tables and chairs for children are sold individually and in sets. In this case, the desk can come in a set with a chair or bench. Often included additional elements: boards, easels, boxes.
- According to the material of manufacture. Typically, the base is made of hard plastic or wood coated with safe paint.
- By design. Neutral colors are suitable for boys and girls. There are also sets aimed only at boys (with images of cars and robots) or only at girls (with drawn princesses and dolls).
In the store's website catalog you will find high-quality products from leading domestic and world manufacturers: Milli Willi, Haenim Toy, Gulliver, Kettler, Khokhloma, RusEkoMebel, etc.
