DIY wooden table on wheels. How to make a serving table with your own hands? DIY folding table on wheels
I made my first serving table several years ago for my wife’s birthday. After searching for pictures online, I found the one that I liked best. I drew a rough sketch from the photograph and did everything based on it. The table fits into our everyday life so well that I didn’t even expect it. It is used as a coffee table, as a serving table, and as a snack table for a computer. And in lately I started using it near the barbecue as an auxiliary one. The presence of wheels allows you to quickly move it around the veranda, transport meat, place spices and other attributes nearby. The only drawback was that I had to carry the table from the house to the veranda and back. Therefore, it was decided to make another such table.
This time I decided to make the preparatory process more thorough. Since already existing table Dimensions were taken and drawings of all parts were made. The technology and sequence of operations have been thought out. And now I invite you to make such a table with me.
For the upper and lower tabletops we will need furniture board. You can make it yourself, or you can buy it ready-made at a hardware store. In the drawing, I deliberately did not indicate the width of the tabletops, since it will depend on the width of the purchased panel. The size should be about 420mm. But a few centimeters in one direction or another will not play a big role. The main thing is that the width of the lower and upper tabletops coincide. All other dimensions will remain unchanged, except for the length of the handle, but I will talk about this later. I came across a shield with a width of 410mm, a length of 2000mm and a thickness of 20mm. This should be enough for the main parts.
The entire marking and manufacturing process is described in videos. You can see drawings and dimensions on this page.
Serving tables are coming back into fashion and are especially relevant before the holidays. Thanks to its compact size and convenient wheels, this table can be at hand anywhere in the house. Need extra space for drinks in your living room when guests arrive? No place to put sauce and chips when you and your family decide to watch a movie on the couch in the evening? Tired of running between the dining room and kitchen, setting the table? It is much easier to arrange glasses, cutlery and snacks on the serving table and calmly bring them to the right place, rather than having an obstacle race for each plate.
Serving table from Cattelan Italia
Most serving tables are very compact in size, so they are suitable even for small apartments. In addition, in conditions of limited living space, it is always better to give preference to mobile and transformable pieces of furniture over stationary ones. For example, it is worth considering that a table on wheels will be more convenient than a regular stationary tea table, because it is much easier to move it to a corner if it is in the way, or transport it to a room in which at the moment There are not enough horizontal planes.
Serving table from Jacues Bar Cart
For small apartments, a folding serving table is perfect, which can literally be hidden in a closet when it is no longer needed.
Folding table from Rexite
For studio apartments or those who like to organize unexpected gatherings on the terrace, a compact folding table may be suitable, which, if necessary, turns into a dining area for four people, but when folded does not take up much space.
Buffet table from Flix - mobile solution
Remember that round models are usually more compact than rectangular ones, West Elm
A serving table can also come in handy in the kitchen, especially if you don’t have enough space in stationary drawers and shelves.
Container table for the kitchen, Miniforms
Of course, an important factor besides the size of the table is its appearance. Among the variety of models, you should focus on the general style of your interior.
Modern, minimalist model with an emphasis on a copper shelf from Miras
Table for fans of classical and baroque style from Modenese Gastone group
Table for outdoors and interiors in country style, Atmosphera
Embodiment Scandinavian style in the interior by Artek
What else should you pay attention to when choosing a serving table? Very often, it is these small objects that become the color or stylistic focal point of the entire interior, attracting the main attention. This is especially convenient for those who want to add zest to the decor, but are hesitant to buy bright sofa or unusual designer wardrobe. A mobile and small table is just right as an accent for a living room or dining room, without looking intrusive.
The giant wheels of the Chariot brand table are an interior decoration in themselves. You can choose various options colors and finishes
An unusual combination of colors and materials in a model from Douglas & Company
It is also worth paying attention to models with additional shelves and compartments in which it will be convenient to place the small things you need at hand.
Swivel shelves and bottle holders in a colorful Colé Italian Design Label table
When choosing furniture for your home, remember the wide variety available options, and don’t get hung up on the standard set: wardrobe, sofa, table. Even one small design item can significantly change the perception of the interior and become the starting point for creating your unique style.
Recycled aluminum table, Roost for Forma Living
A folding table is a very convenient and useful item in everyday life. Many owners complain about the small area of their apartments; therefore, they do not have the opportunity to put a large table in the kitchen. This problem can be effectively solved by purchasing folding models. It is worth noting that they are ideal for trips and picnics in nature.
The folding table is lightweight and compact in size, which allows it to be easily folded into the trunk of a car.
Varieties
This furniture can be various forms and sizes. They differ in the shape of the tabletop (round, square, oval, rectangular), material (wood, metal and a combination thereof), as well as the way they are folded.
The most popular type of folding tables is wooden. If you want to make it as light and easy to transport as possible, then install an inexpensive chipboard countertop.
The simplest way to fold tables with cross-shaped legs. When folded, the dimensions of the structure change, but it itself does not disassemble. In addition, there are completely collapsible products. To create them, threaded fasteners are used.
If you want to do round table with your own hands, you need to shape the tabletop before attaching it. This will greatly simplify the assembly process.
Preparatory work
If you decide to figure out how to make a folding table with your own hands, then first evaluate your capabilities. Craftsmen who do not have extensive experience should give preference to the simplest models with cross-shaped legs.
The dimensions of the table are selected depending on your own needs. It is important to consider the maximum possible load and operating conditions.
At home, it is easier to create a table made of wood. For table top the best option will become chipboard. You will also need the following tools for the job:
- Electric jigsaw;
- Level;
- Paint brushes;
- Ruler/tape measure;
- Hammer, screwdriver;
- Sanding machine (sandpaper).
The latter is recommended to be used only experienced craftsmen. Everyone else should give preference to regular sandpaper. Of course, using it will slow down the process of creating the table a little. But the product will turn out to be of high quality and beautiful.
For work you need wooden blocks measuring 2 x 4.5 centimeters. If you are planning to make a large table, you can order parts 3 x 5 centimeters. As for the length, it ranges from one to five meters.
The material is cut into pieces of the required size in accordance with the drawings of the folding table. It is advisable to use boards for the table top that are thick (at least 4 centimeters) and durable.
Assembly
To connect the bars, you need bolts and screws. Their length is selected in accordance with the thickness of the selected materials. Bolts are used to connect the legs, self-tapping screws are used to secure the footrests.
First you need to cut it out required quantity bars. It is advisable to make them a little larger in size than originally planned. The hole dimensions must also exceed the dimensions of the fasteners. For example, for M4 bolts the hole diameter must be at least five millimeters.
Each part needs to be processed after cutting. grinder or sandpaper. To extend the period of operation, they are coated protective composition(paint or varnish).
It is important to securely fasten the footrests (four pieces). They are at an angle of 90 degrees with respect to the “goats” (folding structure of legs with crossbars at the bottom). For this, ordinary self-tapping screws are used.
Each support requires three pieces. The distance between them should correspond to the size of the block from which the “goats” are made.
To understand what it looks like finished design, find on the Internet a photo of a folding table with your own hands. This way you will understand what result you should get in the end.
All parts are connected using bolts. They are placed in the through central holes of the bars. It is not recommended to tighten them too much. The axle must be allowed to rotate freely. "Goats" are fixed to the tabletop due to bolted connections. Footrests must be attached to them in advance.
If you are worried that the axial mount will become loose over time and fail due to constant folding/unfolding, then use locknuts.
If you want to make a compact table, then remove the bolts that connect the “goats” and the footrests. You are allowed to pick up one or two bolts. Practice shows that it is not worth tightening the fastenings too much in these areas.
Only the footrests require reliable fastening and tightening of the bolts. This is due to the fact that they guarantee the normal installation of the legs.
Photo of a folding table with your own hands
You can make a serving table with your own hands using available construction stores boards and perforated metal corners. The final product will look stylish, fitting perfectly into modern kitchen. And if you have ever tried yourself in something similar, for example, done, then this project will not seem difficult to you.
Note: Since perforated corners can be of any length, you have the right to make a serving table of a height and size convenient for you. These parameters largely depend on the purposes for which this piece of furniture will be used. If, for example, as coffee table, it will be lower. But if you are planning to arrange a place where the serving table will serve as the same island, then it should be taller and larger in size.
Required tools and materials:
— 4 corners 38x38 mm, length 79 cm (for vertical corner posts);
— 6 corners 38x38 mm, length 53 cm (for short edges of shelves);
— 6 corners 38x38 mm, 90 cm long (for long edges of shelves);
- 2 shelves 90x53.5 cm, 26 mm thick (in this case, from laminated boards);
— tabletop 120x60 cm, thickness 26 mm (laminated board);
— 4 furniture rotating wheels with a braking mechanism;
— 4 wooden bars 7.5x10 cm, 35 mm thick for mounting wheels;
— cutting board 30x30 cm, thickness 26 mm;
- hacksaw for metal;
- bolts, nuts, washers and spring washers;
— connecting plates;
— a tool for tightening bolts and nuts (for example, a socket wrench);
— shaped cutter with a rounding attachment 6 mm;
— a drill with the necessary attachments for screwing in screws, a 3 mm drill;
- circular saw;
— impregnation for wood;
— screws 25 mm and 50 mm;
— drill attachment for drilling 90 mm holes;
- clamp, flat strip;
- fine-grained sandpaper;
- chisel;
- furniture fittings.
Do-it-yourself serving table: step-by-step instructions
Step 1. Cutting corners
Using a hacksaw, cut the corners for the future table to the selected dimensions. For convenience, you can secure the corners with a clamp before cutting, and place the hacksaw blade at a slight angle to the plane of the corner (as in the photo).
Note: Vertical posts can be made to other lengths.
Take the short horizontal parts of the table (corners 53 cm long). For each corner on one of its planes (sides), step back 40 mm from the opposite ends. Make a cut in these places to the middle of the corner (fold at an angle of 90 degrees). Having made a cut from each edge of the corner along its rectangular fold, remove the resulting pieces of 40x38 mm. This is necessary so that when the short and long horizontal parts of the table come into contact, there are no overlaps on which wooden shelf will lie unsteadily.
Step 2. Assembling the table frame
Assemble the table frame by bolting the long and short horizontal corners to internal parties vertical corners. Do not overtighten the nuts at this stage. Under top shelf(where the table top will be attached) screw it to vertical posts connecting plates - two per rack. This will allow the structure to be stable during operation.
Step 3: Leveling the structure
At this stage, check that all corners are perpendicular. Measure the diagonals - they should be the same. Now you can tighten the nuts tightly, fixing correct form frame.
Step 4. Adjusting the tabletop and shelves
Most likely, for the serving table that you plan to make with your own hands, you will not find shelves and tabletops in the store required sizes. Therefore, you will have to adjust their sizes yourself. To do this, take measurements, draw cutting lines and, using a clamp, attach a straight strip in the right place. Please note that the rail should not touch the cutting line, but be from it at the distance at which the saw is placed from the edge of the tool. Check everything again. Now make the necessary cuts.
Step 5: Rounding the Edges
Use a router bit to round the edges of the tabletop. Sand with fine sandpaper. Paint the finished edges with a wood stain of the appropriate color (in this case, walnut).
Note: If you chose unpainted boards to make your own serving table, you can paint them along with the finished edges at this stage.
Step 6. Attaching the boards
Center the tabletop relative to metal frame. Drill holes with a 3 mm drill bit in the places where you need to screw in 25 mm screws. Drill and screw in screws from the underside of the shelves.
Step 7: Attaching the Wheels
Using a chisel, use a chisel to make a hollow 2 mm deep and 3.5 cm wide along the long edge of the block (see photo). One side of the corner should be hidden in it so that the block adheres perfectly to the bottom shelf. Attach the bars to the shelf with 50 mm screws. Attach the wheels to the bars.
Step 8. Attaching the cutting board
Step back to the center of the table from two adjacent edges of the tabletop by 30 cm. In this place, use a drill attachment to drill a hole with a diameter of 90 mm.
Note: Do not throw away the sawn circle, but screw it onto the underside of the cutting board. Insert the sawn circle into place and watch how the cutting board rotates on the tabletop around its axis.
Cover everything wooden surfaces impregnation, which can be used to treat surfaces in contact with products.
Step 9. Finishing work
Now is the time to equip your mobile table with convenient accessories. Attach them to the side or bottom of the tabletop. In this case, a paper towel holder, a glass holder, a ladle holder, a bottle opener and two metal towel handles are used. Place a bucket for food waste under the sawn hole in the countertop.
Well, your DIY serving table is ready!
Serving table – convenient and practical item interior, in which functionality and decorativeness are used. The folding version can be used at home, in a restaurant, and in office space. There are many models on sale, but it is quite possible to make a serving table with your own hands. How much it is really necessary and how successful a design idea can be - we will talk about this in this article.
Advantages
This amazing furniture attribute performs a variety of functions:
- An auxiliary surface during cooking and serving;
- Temporary workplace;
- Placement surface decorative items interior
Important! A convenient ergonomic design, equipped with wheels and comfortable lifting tabletops, will help get rid of the annoying running from the living room to the kitchen and back. It is enough to load everything you need onto the table once and bring it where you need it.
Design advantages:
- Everything that a regular one doesn't fit dining table, can be displayed on a compact serving hybrid. This is made possible by the fact that the table has additional opening parts and universal compartments in which you can put bottles or smaller household utensils.
- The lower shelves often have additional protective sides, mesh shelves and removable compartments.
- The structure usually weighs a little - up to 9 kg. Typically, this indicator depends on the material of the countertop.
- Minimal storage space required. And if the model is equipped with folding legs, the table instantly turns into a tray on which you can store food and drinks.
Important! The main advantage of a folding serving table is its ergonomic design details.
Serving table in the interior
A DIY serving table on wheels is a fashionable furniture accessory. Thanks to it, a new, more constructive and functional interior appears in the atmosphere of the home.
When arranging a room, you should consider several nuances:
- If you want to make a design in Chinese, African or Indian style more original, choose products made from natural tree species or MDF.
- For the Modern or High-Tech style, glass or metal products that have portable tabletops are suitable. Glass can be transparent, tinted or colored. On glass material There must be a protective polished edge that provides additional safety.
Important! Most efficient model– on wheels, this unit has improved mobility. A variety of materials are used for their production; the shape can be the most bizarre. The most inexpensive option is a plastic folding serving table.
The design may contain special shelves, hooks, cutting board. Wheels can be large or small, there can be two or four.
Making your own table
To make a serving table with your own hands, drawings can be found in specialized magazines or on the Internet. Let's consider making a simple model, with two tabletops and a handle for transportation on one side.
First of all, you will need to prepare the following tools:
- Circular saw;
- Drills and drill sets;
- Screwdriver and screws;
- Pneumatic hammer;
- Grinding machine;
- Tassels;
- Roulettes;
- Pencil;
- Safety glasses;
- Respirator;
- Gloves.
To make a table on wheels with your own hands, you need to prepare the following materials:
- Board 50x100 mm - frame;
- Board 25x100 mm - tabletops;
- Rail 25x50 mm - edging;
- Paint;
- Putty;
- Finishing nails;
- Wheels.
Important! The lumber must be dry, otherwise the frame will cease to be strong and stable, cracks and gaps will appear in it.
Assembly
Included serving table includes the upper and lower bases, which connect the vertical posts to each other:
- Using circular saw, cut out four blanks 860 mm long and four blanks 320 mm long. These will be used as a base.
Important! All workpieces require pre-treatment with sandpaper. After assembly, leveling the surface in some places will not be possible.
- Using the drawing, we join the boards.
- We screw two screws into each joint. In this case, you should first drill holes of a smaller diameter with a drill. This is done so that the lumber does not split when screwing in the screw.
- We fasten the bases with vertical posts.
- We attach the legs, 780 mm high, from the outside to the prepared bases.
Important! To make it more convenient to fasten the frame with screws, you should use clamps.
- We cut the lumber into twenty planks for table tops. The length of eighteen of them is 420 mm, two – 320 mm.
Important! To align the boards between the table legs, you need to temporarily secure a board of the same thickness using clamps.
- Ten planks are secured to the top base using screws or finishing nails.
- Eight planks are fixed on the lower base, in the middle, and shorter boards are fixed on the sides.
- We fix the edging along the long sides of the tabletops. The slats should have a length of 930 mm. For fastening we use finishing nails.
- We putty the formed recesses and holes.
- We sand the tabletops with sandpaper.
- Apply primer to the surface.
- We paint the resulting table.
- We fix the wheels with screws.
Important! In stores swivel wheels presented in a huge assortment. They are distinguished by design, material and construction. The recommended diameter is at least 80 mm.
