What to make from tiles in the country. Mosaic from broken tiles: master class. Tools and materials
Each person has his own approach to decorating a home: some use stained glass, some use photo wallpaper, and some gravitate towards various kinds stencils and sculptures... But of all this, the mosaic deserves more attention.
Even as a student, studying at the Faculty of Design and Architecture, I enthusiastically studied the work of the great Antonio Gaudi. It’s my dream to go to Barcelona and see his unsurpassed creations live. But absolutely anyone can create at least a small piece of furniture in his style.
Mosaic cladding- one of Gaudi’s favorite techniques. For his collages, he used fragments of dishes, ceramics, and bottles. Masterpieces were made from trash!
It was these photographs that fueled my desire to create a “piece of Barcelona” at home.
Broken ceramic tiles is an excellent material for creativity. It's great for creating decorative elements both in the country house or in the house, and in the apartment.
Broken tile mosaic
This type of work does not require any special skills, but perseverance will come in handy. And if you, like me, want to try yourself in this field for the first time, then for starters it’s better to choose something not particularly grandiose. As you gain experience, you can move on to more complex fantasy decorative elements.- What a magnificent frog! It is somewhat reminiscent of the famous Gaudi lizard from Park Güell.
- Original solution restoration of an old table. An interesting effect can be achieved by adding a layer of glass on top.
- A wonderful idea for decorating a work area in a country kitchen.
- Your breakfasts and dinners at such a table will be even tastier!
- And I just fell in love with this table!
- This is generally unique work…
- The decor of such small architectural forms will obviously require some work, but the result is worth it!
- Path made of broken tiles — great solution, if you recently had a renovation and there is a lot of spoiled or unused material left!
- Amazing magnificence!
- You not only want to sit on such a bench, but also take a photo!
- There's something in this!
- What a wonderful fragment of a snail image made from the remains of broken tiles.
- This is the kind of garden sofa you can create if you wish. Beautiful and practical!
- Bright and unusual solution for facade country house or dachas.
- The combination of colors makes them look very stylish.
- There are simply no words... I didn’t expect such a decision!
- A very interesting and unusual technique. Inspiring!
- What a magnificent dragonfly. Just a sight for sore eyes!
- Using leftover broken tiles you can decorate almost any furniture.
- Exclusive stands for flowerpots: definitely no one has these!
- And you don’t have to invest a lot of money in buying expensive tiles for the kitchen. This is simply a wonderful solution for a kitchen apron that does not require any special expenses.
- It’s not at all difficult to create such decor, but the effect is impressive!
- A very gentle and pleasing combination of colors.
- An interesting idea plus your perseverance, and a real designer piece is ready!
- Painstaking, but very interesting option solutions for cladding a balcony wall.
Coziness in the house is created with the help of fancy details, chosen with taste. And better yet, made with your own hands with soul and immense love for creativity. I hope these ideas have inspired you to create your own. decorative solutions for home.
After all, it’s not at all difficult to find materials to create such masterpieces. In many construction stores There are always leftover tiles or broken ceramics, which are sold as raw materials at a low price. You can also use tiles that you have left over from renovation.
So all that remains is to get excited about a certain idea, find time for it and start doing it. Imagine and create!
CrazyStroitel.ru will tell you how to make paths in your dacha yourself from ceramic tiles.
All experienced summer residents know that when it rains and there are no tiles at their summer cottage, an unpleasant picture awaits you in the form of dirt on your plot. To avoid this and do beautiful path For a DIY tile garden, you will need to follow simple step-by-step instructions.
First you need to decide on the tile.
Option 1
Buy tiles. If you are planning to buy tiles, then optimal size will be 60x60 cm. Thickness 3-7cm. The color is naturally chosen to suit your taste.
Option 2
Make your own tiles from leftovers and stone or debris old tiles or a flat stone, etc.. You can even just use cement mortar. Now we will learn how to concrete a path in a country house.
We make the tiles ourselves (if you have already bought ready-made tiles, then skip this step)
Important! Look on our website .
1. First, calculate how many tiles you will need using this calculator on the partner website Perpendicular.pro. Next, in order to make such a tile, you will need a 60x60 cm wooden mold. The thickness of the mold is at least 10 cm. The solution should be poured to a depth of 7 cm.
2. Place pebbles, granite or flat stones into the mold. Or we don’t pack anything.
3. Fill 1/4 of concrete (1 bucket of concrete and 4 buckets of sand) to 7 cm. We wait 5 days for the tile to gain strength.
Ready. Next step.
Laying a path made of ceramic tiles
Ready. We can do it tile covering for paths in the country: 
Very often after different surfaces the rooms were lined with multi-colored ceramics, among construction waste lie in large quantities tile remains– trimmings and broken pieces. And it’s okay if it’s an old covering knocked off the walls, but very often you have to discard beautiful decorative tiles that have cracked during transportation or storage, and ceramics break very easily if handled carelessly. From such fragments, which were previously part of the materials purchased for cladding, you can make stunningly beautiful things.
Remains of tiles for wall panels
So, the apron in the kitchen and the walls in the bathroom are covered with fashionable tiles, and the hallway is finished with porcelain stoneware. In general, everything is beautiful, the premises please the eye with their novelty, but the hefty pile of tiles spoils the mood. Materials are not cheap, and every broken decorative plate means wasted expenses. However, let's find a use for these fragments of former luxury, for example, lay out a beautiful wall panel in the living room or children's room. There are two options: wall covering or hanging structure.
For any of the proposed methods of decoration, you will need tile adhesive, or any other that can hold the remaining tiles on a vertical plane.
Wall panel - step by step diagram
Step 1: Sorting the battle
All fragments without exception will suit us. However, you should immediately separate them by size. First of all, we separate the largest fragments, this is the easiest, and we will need them for initial stage finishing. Then we sort the remaining pieces into medium and small, the first - with sizes from 5 to 2 centimeters, the second - any remains of at least 1 centimeter. We don’t take the smallest fractions; the tiny ones are difficult to use.
Step 2: Forming the panel
I must say, without creative approach and the ability to work impromptu, it is quite difficult to create a mosaic. The fact is that it is difficult to apply a drawing to the wall in advance, which will subsequently be systematically and immediately large areas covered with adhesive mass. Therefore, it is better to take a large sheet of paper or whatman paper, draw it into squares and then lay out the picture or simple pattern you want with tile fragments. This is how we will transfer the panels into squares onto the prepared surface.
Step 3: Surface Preparation
If you prefer the standard cladding method, you need to clean the area of the wall that you have chosen for the panel from the old coating. In other words, we clean off a piece of wallpaper, scrape off the plaster, and if we are talking about plasterboard sheathing, then remove the putty along with the coating. All the smallest protrusions are removed, the surface is primed and puttied again, after which it is divided into squares identical to those made on the template. Troublesome? Then, as a base, you can take any suitable size chipboard panel or MDF, or better yet, a piece of thick drywall. We attach loops for hanging, prime it, it is better to cover the particle board with drying oil and cover it with reinforcing mesh (preliminarily drawn into squares), and putty a sheet of dry plaster before priming and also mark it out.
Step 4: Finishing
We mix the tile adhesive and cover with it exactly the area to which we will transfer the image fragment from the first square (it’s more convenient to start from the bottom corner). Using a notched trowel, we make several rows of grooves necessary for better subsidence of the mass under the elements of the future panel. Next, we take the largest fragments and place them in the order in which they were laid out on the template. Between them we fix the middle pieces with glue, and fill the remaining gaps with small ones. We remove the excess mass protruding from the seams with a hard rubber spatula.
To change the shape of individual fragments, for example, giving them the contours of flowers or animals, you should use a lathe or grinder with an abrasive wheel.
Step 5: Grout
Now all that remains is to tidy up the seams themselves, which look like a continuous strip of shells and protrusions. After the initial cleaning of the surface, we take another tool - a narrow spatula made of soft rubber. It is ideal for leveling tile adhesive between rows of cladding and resulting in grooves with a smoothly rounded bottom. When the mass holding the coating dries (this will happen after 24 hours), we take a special grouting compound and carefully apply it along all the seams with the same flexible spatula, without particularly trying to keep the panel elements clean. Simply wipe the pieces of tile with a damp sponge or cloth when you are finished, being careful not to touch the treated spaces between them.
When everything is ready, all that remains is to wait for the grout to completely harden. If you applied a mosaic of broken tiles directly to the wall, then you simply proudly admire your work, but if the panel is glued to a shield, you need to screw screws into the wall according to the number of loops, using plastic dowels for strength. Regardless of which version of the panel you made, for greater safety, cover it with clear varnish.
Garden path made of tiles
If you live in a country house and there is no use for fragments of ceramic decorative plates in the premises, it would be a good idea to go into the garden. Look at it with the most critical eye and determine whether you like garden paths. With the help of tile battles, they can be turned into fabulous tablecloths that will stretch between trees and flower beds, creating a spectacular landscape design. Preparation for installation is identical to that described above. Therefore, we skip the first stages and immediately proceed to preparing the surface.
- Surface preparation. We need sand. Ordinary river or quarry clean sand, preferably sifted. For the path, we dig a shallow (up to 15 centimeters) but wide groove, the bottom of which is thoroughly compacted. If the soil cannot be compacted due to excessive looseness, pour a layer of oily clay about 10 centimeters thick and tamp it. A layer of pre-prepared sand should be laid on top, which must be leveled and also thoroughly compacted. We drive pegs along the edge of the future path, pulling a marking cord between them at the level of the intended surface, strictly horizontally, which can be determined using a level.
- Laying tiles. The largest pieces should be laid out along the edge, each of which should have at least one smooth edge; we turn it outward. We press each fragment properly so that they sink into the sand almost to the very top plane. Then knead cement mortar and, lifting the fragments of the future path one by one, pour them into the holes under them mortar, and then put it in place. We fit the middle pieces into the middle of our covering, securing them with cement in the same way, and fill the gaps with small fragments, pressing them into the sand, removing them and simply spreading the solution underneath with a spatula. We maintain the horizontality of the cladding with a block laid on the surface, tapping it with a rubber hammer. Fill the joints with liquid cement, then wipe the surface.
What can you make from broken ceramic tiles for design?
Let's not limit ourselves to standard mosaics, even if they are made with inspiration, and consider the fragments as an element for decorating any objects around you. Take, for example, the usual flower pot, and with the help regular glue "Liquid Nails" Let's cover it with a dense layer of fragments of colored tiles, arranging them in a certain sequence in a simple pattern. The same can be done with any containers, including concrete flowerpots, old buckets and even thermoses, which will thus turn into ceramic jugs.
But we will go further and figure out what we can make from broken ceramic tiles ourselves. Using a wire frame and reinforcing mesh, you can easily build a ball, then cover it polyurethane foam. All that remains is to spread tile adhesive on top and place pieces of broken tiles in it, adding shards of glass with slightly sanded edges in between for effect. Such balls can be placed on specially prepared pedestals made of brick and concrete, also covered with mosaics, or simply decorate flower beds with them, placing them in the center.
If after renovation you still have remnants of ceramic tiles, do not rush to get rid of them. Perhaps, inspired by the examples from this article, you will decide to start decorating your home or summer cottage with beautiful and original ceramic crafts. But it’s also practical and profitable!
So, what can be made from broken tiles, or remaining solid tile samples? First of all, it is a variety of decorative crafts and decoration of interior items. Good decision will lay a mosaic floor from broken tiles. For owners country houses there are just a lot of opportunities for using old or broken tiles in decorating facades, porches, garden paths, and flower beds.
It is important to note that the use of leftover ceramic tiles should not be viewed as solely the whims of the designer’s soul. Tile scraps do not lose their performance qualities and have great practical benefits - products decorated with them, be it a flower pot or kitchen apron, will serve you much longer than usual, and a garden path properly laid out from leftover tiles will become a comfortable and reliable place for movement and walking. At the same time, you will not spend money on new materials, optimizing your expenses to the maximum.
Mosaic from remnants of tiles
As a rule, after renovation, a lot of broken or cut tiles remain. It is these production wastes that are most often used to create mosaics. Much less often, whole old tiles are used for these purposes. We have already described in detail how to make a mosaic from broken or whole tiles in this article. Therefore, we will not dwell on the technical part of making the mosaic itself here.
Now let's take a closer look at what can be made from leftover tiles, regardless of the form in which they are presented.
Crafts from leftover ceramic tiles
As a rule, upon completion repair work you are left with an unused amount of tiles, or all sorts of trimmings and fragments accumulate. Some people see this accumulation of broken ceramics as just a mountain of garbage, while others see it as a wonderful opportunity to create “hand made” home decor.
If you are still in doubt about what beautiful crafts from leftovers tiles can be created, check out our selection of the best examples in this area.
Placemats
Let's start from the very beginning simple solution- creating stands for glasses, cups, and other tableware from the remains of ceramic tiles. This solution seems ideal if you have unused tiles. small sizes- 10x10, 15x15.
In this case, you just need to wash them from dust and the wonderful stand is ready.
The remains of the mosaic can also be used in the same direction. Due to the fact that the mosaic chips are glued to the mesh, this solution will be convenient to use and will protect your countertops from scratches that dishes can leave on it.
Decorating flower pots with mosaics from leftover tiles.
Give dull clay or plastic flower pots and vases a pop of color and interest. By decorating a flower pot with broken ceramics, you will also significantly increase its service life.
It should also be recalled that ceramic shards can be excellent drainage.
Ceramic mirror frame.
Using leftover ceramic tiles to decorate a mirror will create a modern and stylish solution. It is not too complicated to implement but will significantly refresh the space of your bathroom.
For this task, both the remains of solid tiles and broken samples that you could not use in the cladding are suitable.
By choosing a glossy multi-colored mosaic for cladding, you can provide spectacular reflections and dispersion sunlight throughout the room.
Photo on a tile instead of a frame.
Another effortless way to repurpose unwanted tiles is to glue photos of relatives onto them. By hanging the tile in a prominent place, you will remind in such an original way of your love for your loved ones.
Covering the countertop with remnants of tiles
If your kitchen table already quite shabby, covered with scratches and chips, update it with the existing tiles. This way you will significantly extend the life of the table, and also make it a real work of art.
Kitchen apron made from the remains of ceramic tiles.
No less practical option to use broken or simply unnecessary tiles - tile the kitchen apron with it. This is usually a small area and you won't need too many tiles.
Broken tile floor.
Of course, you won’t have enough leftover tiles to cover the entire floor. But decorate small area- quite. Such a decorative inclusion will add zest to the interior. Especially if the floor is plain, and the decorative tile insert is made of multi-colored mosaic pieces.
Specialists from the Keramacenter company note that when choosing material for floor tiling from leftover tiles, you should pay attention to the ends that are too sharp - it is better to sand them down. In all other respects, the technology for laying broken tiles on the floor is no different from the usual one.
How to use old or broken tiles in your garden
According to good tradition, we hide everything unnecessary and superfluous on the balcony or take it to the dacha. Many summer residents accumulate a lot of all sorts of things, without any particular need.
Meanwhile, dacha farming requires regular attention and care, and the issue of cleanliness and order is one of the most pressing. There are a lot of places here where you can effectively use the remains of ceramic tiles in landscaping.
Garden paths made of broken tiles.
The remains of broken tiles will be a good and useful addition to garden path. They can play both an auxiliary role - to strengthen the surface, and a main one, depending on how many broken tiles you have.
But there is one caveat: if the tiles are glossy (left over after tiling the walls), then it is not recommended to make the entire path entirely from it - in the winter season, or after precipitation, it can be slippery. In this case, it is better to limit yourself to individual inserts for decoration purposes.
Flower beds made of broken tiles.
Ceramic tiles will make your artificial flower beds not only more protected from the harmful effects of nature, but also beautiful.
Benches and garden furniture.
The use of old tiles in the country can and should meet considerations of benefit and practicality. As you have probably already noticed, we try to focus on examples where the remains of tiles are used to improve household items that have functional load, and not playing a purely decorative role.
So now we want to offer a few wonderful examples for your inspiration, where the already well-worn garden furniture, and other household items, acquire a second life thanks to the application of broken tiles to their surface.
So, we tried to show all the options for what can be made from leftover tiles. You can easily implement any of the proposed solutions in your apartment or on your summer cottage. And don't forget that ceramic tiles are durable, environmentally friendly pure material. There will always be a place for her in the household.
