≡× MENU

• Interior
• Window
• Walls
• Projects
• The buildings

How to build any type of hut with your own hands. DIY home decoration. Handmade. Fashionable solutions for interiors, gifts and accessories Main types of outdoor huts and stages of their production

And here's another excerpt from the book by zoologist Gerald Durrell

Take bowerbirds, for example. In my opinion, in our world you don’t often come across such an irresistible manner of courtship. The satin bowerbird is a modest-looking bird, the size of a thrush, dressed in dark blue feathers that have a metallic sheen in the light. Hand on heart, this nondescript gentleman, like wearing a shabby cheviot suit to a shine, seems to never be able to make the female forget about his wretched attire and give him her heart. But he achieves his goal amazingly in a cunning way- he's building a hut!

Once again I was lucky enough to see at the zoo how the satin bowerbird builds its temple of love. He most carefully cleared the space around two clumps of grass in the center of the enclosure and built a path between them. Then he began dragging branches, straw, and pieces of rope, intertwining them with the grass to form a tunnel. I noticed his work when he had already built the tunnel and began decorating his house. First he brought in a couple of empty shells, then a silver wrapper from a pack of cigarettes, a piece of wool he had found somewhere, six multi-colored stones and a piece of string with the remains of a wax seal. I decided that he could use some more decorative items, and brought several threads of colored wool yarn, a couple of colorful sea shells and old bus tickets.

Alashnik was delighted; he ran to the grate, carefully took the offerings from my hands and skipped to his hut to put them in place. He stood for about a minute, contemplating each decoration, then jumped up and moved a bus ticket or a thread of wool so as to achieve the best artistic effect. The finished hut really did look good, and the builder, standing at the entrance, preened himself, from time to time stretching out one wing, as if proudly offering to admire his masterpiece. Then he ran back and forth through the tunnel several times, rearranged the shells better and again stood proudly in a pose with one wing extended. He really worked on the hut, tirelessly, and I felt a sharp pity: after all, all his work would be in vain, because his female had recently died, and there was no one in the enclosure with him except a handful of noisy ordinary finches, who did not show the slightest interest in his talent as an architect and decorator.

In the wild, the satin bowerbird is one of the few birds that use tools; sometimes he paints the wicker walls of his hut with the juice of bright berries or wet coal, using a bunch of some fibers. Unfortunately, I remembered this too late, and when I finally brought him a pot of blue paint and a disheveled piece of rope - bowerbirds are partial to blue color, - he no longer occupied himself with his hut and was completely indifferent to a set of postcards from cigarette packs, which depicted military uniforms of all times.

Another species of bowerbird erects an even more monumental structure - from four to six feet in height, entwining branches with the trunks of two neighboring trees and covering the bower on top with vines. The inside of the room is carefully lined with moss, and outside this bowerbird - apparently a social bird with exquisite taste - decorates the mansion with orchids. In front of the entrance to the house, he builds a small flowerbed of fresh green moss and puts on it all the bright berries and flowers that he can find, and this neat guy changes the display every day, putting the lost decorations behind the house.

Many lovers of outdoor activities sometimes stay overnight in the forest. In this case, you can sleep in the cabin of a car, in a tent or in a sleeping bag. However the best option will spend the night in a hut built from available materials. In the fresh air with the pleasant smell of wood in good weather a comfortable atmosphere for sleeping is created in this simple structure. But many people have a question about how to make a hut. Instructions for the construction of this structure will be provided below. More on this below.

Definition

The hut is a universal short-term shelter. It is used for overnight shelter, protection from the sun, strong winds, temperature and atmospheric changes, precipitation in the form of rain and snow.

Types of huts

There are many variations of this structure. However, there are three types of simple huts. Namely:

• free-standing;
• attached;
• huts in a recess.

Each type has its own construction features, which have much in common. They depend on the time of year, weather conditions and type of terrain.

How to make a hut with your own hands?

First you need to choose appropriate place for the construction of this temporary shelter. It cannot be installed in narrow gorges, on river banks, or at the bottom of canyons. Because floods, flash floods or sudden downpours may occur. The danger comes from creating a hut under rocks that overhang the site, as well as at the foot of steep mountains. When choosing a parking place, you need to take into account the cardinal directions. Let's consider the main location options.

1. How to make a hut in a mountain forest. The specified attached-type structure is well suited for this area. This means that one of the walls or even two walls will be made of wood or stone - part of the rock. In this case, you should try to avoid precipitation. That is, do not place a hut in hollows with obvious traces of water flows. Because if it rains, a stream of water will flow down. Otherwise, the rules for installing this structure are the same as for a tent. The entrance to the hut should be on the opposite side to the top. Grooves should be made around the perimeter to allow water to drain in case of rain.
2. How to make a hut in a lowland forest? The answer to this question is quite simple. In a forest where there is a plain, it is possible to build a recessed, classic or attached hut. In this case, the place is chosen based on the weather. This is important. In cold weather without rain, you need to find a hole that will serve as a temporary shelter. When it rains, the specified structure is placed on an elevated place.

Choosing a hut type

1. Classic hut. This type of structure is made in the form of a fire pit for cooking. In this case, two poles or branches are installed vertically. The third is laid on them horizontally. Dressing is done using improvised means: flexible twigs, grass stems, vines.

In this case, there are still several types of installation. For example, 2 poles or straight branches, cut with a knife, are installed to each other at an angle at the exit from the hut and the back wall with a distance of 2-2.5 meters. It's not hard to do. Then the main pole is laid horizontally on them. The next option is a wigwam. In this case, you can lay the poles in a circle at an angle to each other in the form of a fire pit, and also use a living growing tree as a support point for them.

2. An attached hut. This also includes the type in the form of a wigwam around a tree. In this case, there may also be a hut created on the basis of poles that rest on a rock in a mountainous area. The walls are made like the above classical structure.

3. Recessed hut. This type of building looks like a classic hollow or is something between a dugout and a hut. That is, when only the top (roof) is covered.

Main principles of construction

Before you make a hut with your own hands, you need to know the following:

1. Location.
2. Type of hut.
3. The basis of this structure should be several poles with sharp ends, sunk into the ground. One of them is installed as a load-bearing ceiling beam.
4. The poles of the hut walls are installed with a slope of 45-60 degrees. Except when one wall is vertical.
5. The roof must be stitched with branches (poles) in several tiers parallel to the ground along the perimeter between the installed beam and the ground. Then it will be easier to lay the spruce branches or branches.
6. In deciding how to make a hut, it is necessary correct execution laying spruce branches on the base of the pole. In this case, it all depends on individual desire. This must be done in such a way that top part Place the lower spruce branches under the corresponding side of the layer on top. This is done in the same way as when Then the raindrops will roll down freely.
7. Instead of spruce branches there will be branches with large leaves, as well as polyethylene with tarpaulin.

Interior arrangement of the hut

This process is also important point. In the forest, when there are no usual sleeping bags, folding beds, air mattress and bedding, one must be able to adapt to such conditions. There are two types of arrangement flooring: with and without the presence of a lesion. Each case requires a separate approach. Typically, in the cool season, and also when you need to protect yourself from mosquitoes and mosquitoes, you should protect walls and dead wood from sparks from the fireplace. Therefore, they lay it out in the center, limit it with stones, sprinkle earth between the stones, and make a quarantine zone of about 15-20 cm around it. Dead wood is laid on the floor of the hut (on the ground) - last year’s leaves with branches, shoots. Material in the form of tarpaulin, excess clothing, or polyethylene will also work.

Construction of a hut in the forest

This case also has its own nuances. Experienced travelers know how to make a hut in the forest. In this case, you can build a shelter different types. The simplest option is considered to be a classic hut. Any lying tree is suitable for the construction of this structure. It will serve as a kind of frame for the hut. The branches of this tree will become a holding agent for those rods that create the roof. Before you make a hut, the photo of which is provided in the text, you should remember that before starting this process you need to make sure that the lying tree will not crush you. Next, you need to cut off with a knife or tear off with your hands the excess branches that are inside the structure. This is important to do for convenience. The resulting branches are folded so as to form a slope for the roof of the hut. The thickness of the laid layer determines whether raindrops will get inside the structure. With a lying tree, you can build both a single- and double-sloped hut, depending on the position in which it is located. A lean-to hut can easily be expanded to the second option indicated. Let's look at this in more detail next.

Construction of a lean-to hut

This process is not complicated. The simplest lean-to shelters begin with a frame, and a film or tarpaulin is attached to it on top. The lower edges are pressed against stones or a log. This shelter serves as a screen. You can make a lounger like a bed from spruce branches. The fire should be lit at a distance of about one meter from the sun lounger. This is important. At night, wood is added to the fire. At a temperature of about +5 degrees, you need to stock up on 2-3 dry thick two-meter logs in advance. You can use them to make a “Nodya” fire. To do this, two or three logs are placed on top of each other with smoldering coals between them. This provides warmth throughout the night.

Gable hut

In this case there is also nothing complicated. You can use any available means in the form of spruce branches, reeds, hay, grass or straw. You need to start by preparing thin rods, a support pole and two strong flyers for the base of this structure. In this case, you need to have some skills. Install the flyers by vertically driving them firmly into the ground a third of the length so that they do not wobble. A strong horizontal pole is installed on top of them, on which thin rods are laid at an angle in the form of rafters. Then the material is laid on them from bottom to top. This must be done so that the top row overlaps the bottom. The back and side walls hut. A fire with a heat shield is lit at the entrance to this building. In this case, it should be taken into account that the specified heat shield must be inclined towards the entrance.

How to build huts with your own hands from branches?

Let's take a closer look at this process. Before making a hut from branches, you need to prepare:

• large knife or ax;
• tree branches;
• strong rope;
• stakes made of thick branches.

First you need to decide on the shape and materials of construction. The optimal option is considered to be a gable option, that is, in the form of a tent. To do this, you need to prepare 6 thick branches about a meter long with a diameter of 5-7 cm. Two of them should be slightly shorter. These branches will become the basis of the frame of the hut, serving as the back and front walls. After choosing a level place, stakes are installed, digging them into the ground in the form of two tripods, one opposite the other. The distance between the stakes will be the length of the hut. In this case, the tripods should face each other with one side of an imaginary triangle. Then thin twigs or rope are attached horizontally to the resulting empty walls. Also in this case you can use climbing plants. There are many of them in the southern regions of Russia. The vertical distance between the branches should be about 20 cm. These crossbars will be used to secure the sheathing branches.

In general, nature itself suggests how to make a hut with your own hands in the forest. Properly laid branches will shield each other. The crown of the tree will provide shelter from the rain. Walls are also being built. In this case, you should take fluffy branches or spruce branches from coniferous trees. After this, you need to break them off so that a hook is formed at the broken end. It is needed to subsequently attach the branch to the crossbars. In this case, it is necessary to begin the construction of walls from the bottom side. This must be done in such a way that the upper branches overlap the lower ones. Then the raindrops will roll down. If you wish, you can line the floor with branches. As a result, the question of how to make a hut from branches can be resolved very simply.

Construction of the specified structure for children on a tree

Many of the children thought about how to make a treehouse. In this case, everything is also quite simple and clear. At the right approach you can build a hut for children and grandchildren on a tree. If there are 2 trees standing next to each other on a summer cottage, then between them you will get a good structure. This will not take much time and building materials. Before you make a treehouse, you need to stock up on the following devices and tools:

• sheets of plywood: one with a thickness of 18-20 mm and two - 8-10 mm;
• bolts;
• timber with dimensions 50x150 mm and 50x100 mm;
• hacksaw or circular saw;
• galvanized nails;
• roofing felt;
• birch bark.

The construction of the hut should be based on 2 boards 50x150 mm. In this case, they are attached to two thick trees. There is nothing complicated in this regard. It is necessary that the diameters of the tree trunks be approximately 20 cm. Then the bottom of the hut with the side walls, as well as triangles for the brackets, are cut out of a sheet of plywood. This will require a lot of patience and scrupulousness. Next, triangular sidewalls are assembled from pre-prepared and sawn half-timber bars. After this, they are bolted together. This will be followed by the process of connecting the assembled triangular sidewalls with a ridge beam. Its cross-section should be 50x100 mm. After this, it is necessary to connect the indicated sidewalls with the two beams located below. Next, using brackets, attach the resulting frame to two support boards with a cross section of 50x150 mm, which are already pre-fixed to the trees. Now you need to take the bottom, cut out of plywood. It is necessary to drill holes for nails. After this you need to nail the bottom to lower bars and joists with galvanized nails with large heads. Now we need to think about building a roof and hatch windows. The best solution in this case is a multi-layer roof. This will ensure reliability. In 1 layer, plywood with a sheet thickness of 8-10 mm is used. The second one can be made of roofing felt or glassine. And for the third layer, birch bark will be used.

Bottom line

Having read the above, everyone can decide for themselves the question of how to make a hut from boards, branches and other improvised means or building materials, as well as find out what types of these structures exist.

Communication with nature has always been beneficial for children. IN Soviet times schoolchildren often disappeared into the forest, building huts and dugouts, which were bases for playing “war games”, places to spend pleasant time with friends. Although the era of forest tourism has already passed, giving way to the computer era, many still prefer to get out into nature and build such familiar and interesting structures as huts.

A hut is an artificial shelter, quickly constructed on the go from available materials (branches, boards, poles, turf). This type of building has long been used by hunters, mushroom pickers, rangers and tourists for protection from bad weather and long-term stays away from the benefits of civilization. Besides, Such shelters have long become a favorite place for children to play- they not only build them with great pleasure, but also spend a lot of time in them, arranging improvised headquarters for their forestry detachments, warehouses for all kinds of provisions and simply secluded shelters.

To the modern child, consumed by the world computer games And social networks, such entertainment helps not only to improve your well-being, but also to acquire useful skills in constructing such structures with your own hands, becoming closer to nature.

A hut is an artificial shelter that can be quickly constructed on the go from scrap materials.

Main types of street huts and stages of their production

According to their design, huts are divided into:

1. Single-pitch- the simplest, consisting of a visor resting on trees or a stake dug into the ground
2. Gable– externally they resemble a tent, they consist of a frame covered with branches, moss and spruce branches.
3. Circular- tall buildings erected in the form of a tent (cone), externally reminiscent of Indian wigwams. They are built around a tree or a long stake driven into the ground.

Huts with recesses below ground level are the famous dugouts, the living part of which is located in a well-insulated and covered pit.

Each of these huts consists of:

• Frame - the frame of a building assembled from poles;
• Covering material - branches, spruce branches, straw, moss;
• Fasteners - nylon threads, adhesive tape. In camping conditions, if they are not available, they often use improvised fastening materials - freshly cut strips of bark, dug up long roots, strands of grass.

The construction of a hut consists of assembling the frame and carefully covering it with lining material and arranging a fire pit.

Gallery: hut on a summer cottage (25 photos)

How to make a hut (video)

How to build a simple lean-to hut (halabudu) from branches in the forest

This type of hut is the simplest and can be constructed within a few hours.

• For a hut, choose a high and dry place with two thick trees standing at a distance of 1.5-2 meters with strong knots at the bottom of the trunks.
• A strong pole 2-2.5 meters long is cut down and placed on tree branches so that its height from the ground is up to 1.5 meters.
• The ramp poles resting on the ground are tied to the resulting crossbar using strips of bark.
• The resulting frame is covered first with thin branches with foliage, and then with spruce branches.
• At the ends of the hut, stakes are driven in and branches and spruce paws are placed tightly.
• To avoid sitting on cold ground The floor of the hut is covered with spruce paws, branches or simple grass. The layer of such insulation should be at least 30 cm.
• To prevent it from being cold inside such a canopy, a fireplace is made in front of the entrance, behind which a reflector is installed - a low fence made of stakes driven into the ground and branches intertwined between them, thanks to which heat flows inside the building.

Simple lean-to hut is the simplest and can be constructed within a few hours

Construction of a gable hut on the street with your own hands

A gable hut is built in the forest with the maximum use of available materials without the use of nails, screws and other metal fasteners.

The construction of a gable hut is carried out according to a simple scheme:

• First, a site is selected in a high, non-swampy, dry place from which windbreaks, debris, and stones are removed. You should not build a hut near anthills or burrows of wild animals. It’s better to build a hut under the canopies big trees– if it rains, they will provide additional protection from moisture.
• For the frame, two straight sticks with branches in the upper part are cut down. The lower ends of the spears are sharpened and driven in along one line at a distance equal to the length of the future building
• A long pole is placed on the slingshots, tying it to them with threads, tape, or, in their absence, with strips of fresh bark removed from the cut down sticks.
• Next, on both sides of each of the spears, poles made of thick branches resting at an angle on the ground are tied, securing them at the base with pegs driven into the ground, and at the top with bark, thread, and tape. The same poles are laid parallel to the end ones in increments of 40-50 cm.
• Parallel to the ridge of the resulting frame, longitudinal poles are laid on the surface of both slopes, tying them at the points of intersection with the inclined ones. If there are thick trees nearby, the hut is tied to them using strong twine - this makes the building more stable.
• The resulting skeleton, reminiscent gable roof on both sides of the ridge, as well as at the ends, while leaving space for entry, they are covered with branches.
• At the last stage, spruce legs are laid on each of the slopes of the building, starting from the ground.
• If the spruce branches are tightly laid, the roof of such a shelter will not leak even in heavy rain or snow, and the inside will be dry and comfortable.
• Very often a thick layer is laid on top of the branches on the slopes. plastic film tarpaulin.
• If there is a field nearby with dry straw remaining after the harvest, then it can be used to cover the roof along with spruce legs - the main thing in this case is to remember that you should light fires in such a hut very carefully so that an accidental spark does not set the dry stems on fire.
• To prevent the hut from flooding during heavy rains, a small ditch with a groove extending to the side is made along its perimeter

A gable hut is built in the forest with maximum use of available materials without the use of nails, screws and other metal fasteners

Building a winter hut in the ground

In addition to above-ground ones, it is also possible to build one located below ground level. a hut in which you can stay not only in the warm season, but even in winter:

• For construction, choose a dry place away from the trunks of large trees - it is best to build such a shelter on hills and hills with loose sandy soil.
• The pit for the dugout in which 3-4 people will be located at the same time is made 3x4-5 meters in size and up to 1.5-2 meters deep. When excavating the soil, I throw the removed turf and fertile soil not far from the pit, since in the future they will be useful for filling the roof of the dugout. On one side of the pit, an additional trench is made for entry.
• Pegs are driven along the walls of the pit, while retreating to make the distance between them and the soil layer equal to the thickness of the boards or logs used to construct the walls.
• Boards or logs are placed between the driven stakes, thereby forming the walls of the building.
• The floor of the dugout is first insulated with dry leaves, sawdust and covered with poles or boards.
• To build a roof, 3 thick dugouts are dug along the central axis of the rectangle. supporting pillars, two of which are located near the walls, and one in the center of the dugout.
• In the upper part, the pillars are fastened with a longitudinal pole, on which thin logs are tightly laid on both sides with an inclination towards the ground.
• The finished roof is covered with earth and covered with turf.
• The ends of the roof protruding above the ground are covered with boards.
• The entrance to the dugout is a trench adjacent to the pit - for this, steps are dug at its beginning or a ladder is installed. The entrance is covered with a wooden shield.
• To prevent the wood of the dugout structures from rotting due to high humidity, it is treated with special solutions.

How to build a treehouse (video)

How to make a circular Indian hut (wigwam) for children

A wigwam is a circular hut. It can be built both in nature and on backyard private house and even in an apartment

In order to make a children's wigwam you need:

• 4-6 wooden round section sticks with a diameter of 2-2.5 cm are tied with coarse thread or electrical tape so as to form a cone or pyramid. If a wigwam is made outside, the sticks of the frame are driven into the ground, having previously sharpened their ends.
• For the hut, a cover is made from dense material with ties, with the help of which it is tied to the frame. The cover must cover most hut, leaving space in its front for entry.
• The entrance is made by sewing two curtains to the cover.
• To give the wigwam an attractive look, strips, circles, and other shapes cut from pieces of colored material (paper, cardboard) are glued onto the material of the cover.
• A thick blanket is placed at the bottom of the hut.

A wigwam is a circular hut

Making a children's hut at home

Since many people do not have a regular opportunity to get out into nature, very often huts are made at home:

• For the ridge of the frame, use 4 dry bars 2-2.5 cm thick and a stick of the same diameter.
• To assemble the end walls, the bars are folded in the shape of a triangle and a hole equal to the diameter of the ridge is made using a drill at a distance of 3-4 cm from the ends.
• A round stick is passed through the hole in the crosshairs.
• The resulting frame is sheathed on three sides with fabric and cardboard.
• To make the hut stable, the elements of the rear wall in the lower part are fastened with another block.
• A retractable curtain is installed at the entrance.

The resulting hut fits perfectly not only in an open space, but also inside a children's room.

The whimsical outlines of the branches involuntarily attract attention, and you want to capture this subtle beauty not only in memory or in photographs, but also in real life. If desired, you can add an unusual decorative touch to the interior by creating interesting compositions or creative products with utilitarian features. Crafts from tree branches are a great hobby that allows you to create beautiful decorative elements with your own hands without investing any financial costs. The interior of a house, decorated with this natural material, acquires a special sophistication, where everything is aimed at emphasizing its individuality. Before starting work, the blank for the future craft should be carefully prepared, taking into account the individual characteristics of the wood.

Crafts from branches - material preparation

For creative activity To decorate the chosen room (it could be, or even) you will need well-dried branches. They are easy to collect during forest walks, and also to pick up in a public garden or park. You can independently dry the branches that remain after performing sanitary pruning measures.

Before working, dry the material carefully for further use:

Inspected for cracks;
Cleaned from dust and dirt;
Peeling areas on the bark are sanded.

To prevent the appearance of unwanted larvae in the house, it is necessary to carry out disinfection using a low concentration solution of potassium permanganate, known to many. Depending on the design, the branches can be painted in the desired tone, covered with stain or varnish.

Decoration of various items

Having brought home a bouquet, you can quickly make a creative vase using branches. To do this, take any suitable jar - tin, glass, and cut pieces of branches slightly longer than the height of the container.

They are placed close to each other in a vertical direction on the outer surface of the jar and secured by tying it with a beautiful braid or ribbon. You can plant twigs on glue. Flower pots are decorated in the same way.

To make this wonderful vase, in addition to the glass base, you will need: a glue gun, dry willow or birch sticks, and wire cutters.

1. Harvested branches need to be cleared of bark. It is better to do this when the wood has not yet dried, so it will be much easier to remove the bark;
2. Next, using wire cutters, cut the bare branches into small pieces. Their size should be calculated based on the height of your workpiece;
3. After the material has dried, we glue each stick to the base so that we get a kind of lathing;
4. It remains to give the glue time to dry for 10-15 minutes. Congratulations, the twig vase is ready!

Crafts made from branches will always find their worthy use in decorating the interior of a house or apartment. Their shape and size can be completely different, because for their manufacture you can use various material. Products made from bark, wood chips, driftwood, sawn logs or large branches, etc. will look good. It all depends on your imagination and personal preferences.

Branches installed inside a glass jar in a continuous layer along the entire side plane will look no less original. To prevent them from falling apart in a makeshift vase, the bouquet should be quite voluminous.

For the products described above, you will need fairly even trimmings from the lower ends of the branches. The upper thin stems will help create a delightful evening with the flickering of candles. To do this, simply place them in a glass container so that they rise above it, pour no more than half the volume with water and lower the floating candles.

Charming compositions from branches

To bring an unusual accent to a room, for example, a bedroom, trunks topped with a web of thin branches, placed at the head of the bed in a niche cut into one side of the coffee table top, will help. A tall floor vase containing dried cereals along with branches will look elegant in a dining area or office.

Bizarrely curved branched thin tree trunks are placed in a vase and decorated with colors that match the interior decorative elements. These can be sparkling stars or snowflakes on the eve of the New Year, bright valentines on the eve of the corresponding Valentine's Day, or simply butterflies with fancy patterns on their wings, birds, flowers, fruits, leaves from any available material.

By attaching graceful branches to velvet fabric, the color harmonizes with the overall decor, and placing, after gluing onto cardboard, the resulting composition in a wooden frame, you can get an elegant interior decoration.

A beautiful branch can be complemented with golden bows, New Year's balls or forest cones. This decoration will help good mood and evoke only positive emotions. In addition, New Year's decorations will create a festive atmosphere on the eve of the main winter celebration.

Branches in the interior: step-by-step master class

Tall trunks of shrubs (usually willow) will allow you to do this in an unusual way. For example, separate the sofa corner from the rest of the space in the living room. This partition is made very simply:

1. To do this, use it as a stand wooden beam the required length. You can use absolutely any type of wood.
2. Two rows of non-through holes are drilled in the timber in a checkerboard pattern, in which prepared branches are fixed vertically to glue. Their length should be about a meter less than the height of the room. The step depends on how openwork the resulting screen should be.
3. To make the product look stylish, it is varnished.

Current bedroom design ideas are limitless - birch trunks in the interior are proof of this

Trimmings of trunks with a diameter of 8-10 cm with strong branches extending upward from the side at an acute angle easily turn into dear hangers. They can be mounted on the wall in the hallway, creating a natural corner with a specific purpose. Among the designer finds you can find birch trunks that act as cornices and even posts near the bed for attaching a canopy.

Will complement the picture coffee table, the base of which is a bundle of branches fastened vertically into a stable cylinder, and the tabletop is durable glass of a round or oval shape.

You can make an option with an unexpected effect by fastening the branches in the shape of a cube and laying it on the floor on the side edge. A plastic or glass square table top is placed on top.

Often decorated with branches wall mirrors. They can be glued along the entire perimeter perpendicular to the frame or along it. There can be many options. Craftsmen easily make frames for photographs, children's drawings, and reproductions of favorite paintings from scraps of thin trunks.

A gracefully curved thick branch can become the basis table lamp. A branch with many branches, mounted on the wall near the mirror on dressing table, will allow you to easily place all the jewelry.

This type of work requires gentle female hands and special attention.

Creative inspiration is the main incentive for a person who wants to create beautiful crafts made from branches with your own hands.

In spacious hallways, one wall can be turned into a fairy-tale forest by installing trunks reaching to the ceiling behind a high plinth with LED lighting installed near the floor. This is one of the best ways Give your interior a picturesque look. Both thin and thick tree branches can be used as material.

Small items made from dried driftwood will look original. For variety, you can use tree bark and wood chips, later combining everything into a single composition.

We make decor from branches with our own hands

Crafts made from branches are always distinguished by their originality and unique design. With the help of these simple sticks and twigs you can create beautiful designer decor on absolutely any theme. , paintings, wreaths, flower pots, fancy animal figurines - this is just a small part of what can be created from this wonderful natural material.

1. Making a wreath from branches is probably one of the simplest tasks that even a child can handle. Take thin rods willow tree and weave them together into a tight ring, then carefully tie them with copper wire. As an additional decoration for the wreath, you can use tree leaves, flowers, and forest cones.
2. You can revive an inconspicuous tree branch using ordinary snowflakes. Cut them out of paper, foil or colored felt and hang them on each branch. Such compositions will look great in the house against a wall with beautiful wallpaper.
3. If you have any broken light bulbs, they can also be used as decoration. Make it from soft wire special mount, with which they can be hung on a branch so that the bulb base is at the top. Next, through a hole specially made in the base, the light bulb is half filled with water. All that remains is to give our miniature an elegant look. To do this, the branch can be decorated with decorative braid, ribbons and bows.

Despite the fact that the process of creating some crafts is quite long and labor-intensive, the result of the work done will be amazing.

Even the most ordinary painted twigs can become excellent material for making fun crafts. For example, unique products made from star-shaped branches will look very beautiful and fun in interior design. You can make them with your own hands on a regular table.

1. Preparation of material. For each craft we will need 5 sticks. These can be branches of any tree, the main thing is that they are even and of the same length. The material should be dried and varnished in advance, so your products will last longer. We also need thread, rope or thin ribbon. With their help we will tie the ends of our sticks.
2. Making a star. Place the sticks on the table so that they form a closed pentagonal star shape. Tie each formed corner with thread or rope and decorate with satin ribbons. The resulting star can be hung on the Christmas tree or given to friends.

To create something unique for your interior, do not copy someone else’s ideas, but try to do everything yourself. Feel the mood of your home, think about what exactly is missing in it, what things and objects could highlight your own style. Write down everything that comes to your mind in a notebook - these thoughts may be useful to you when creating an interior design.

Pay attention to the little things. They are the ones who are in creative union with non-standard design solutions create an unsurpassed atmosphere and focus on a specific element of the interior.

Original floor lamp - creative decoration interior

Crafts from branches are not only beautiful, but also profitable. The main advantage is that their production does not require any funds, because the material itself is literally lying under our feet. Moreover, all compositions can be created with your own hands, involving your children in this entertaining process.

Crafts made from branches can be easily and quickly sold, because this unique decor, which is always in high demand. You can also earn extra money by teaching paid master classes on creating designer jewelry for beginners.

We really hope that this article was useful to you. Create, be creative, experiment and perhaps this interesting hobby will grow into yours. professional sphere activities.

Handmade crafts from natural materials will create an atmosphere of comfort and a romantic atmosphere in your home. Such crafts and interior items made from natural materials are very popular today. It’s especially nice to surprise your friends with such decorative items made by yourself. In order to decorate the interior of your country house or apartment, you can make crafts from branches of various trees.

To use, you need branches that have not been eaten by the bug. It is better to collect such branches in the fall or in early spring. Also, all branches without exception require processing in at least 2 stages:

1) Drying the branches is a must. Otherwise, the product will warp in the first month. We dry at room temperature 1-2 week. Or 7 days for batteries. And if you want it very quickly, then in the oven for 2-3 hours on low heat and with the door ajar so that the moisture comes out.

2) Also desirable painting or varnishing. If there is no special varnish for wood at all, then you can treat it with transparent nail varnish.

To do this, we offer you 10 master classes on crafts made from tree branches with your own hands.

Candlestick made of tree branches

Stylish candlestick in 5 minutes

To make a candlestick from twigs, We need:

• Dry twigs.
• A small glass cup.
• Hot glue gun.
• Candle.

Step 1:

Collect a small amount of twigs, wash them in water and dry them. After drying, cut them with pruning shears into approximately equal lengths.

Step 2:

Take a small glass cup and a hot glue gun. Apply glue to each branch with a glue gun and glue it to the cup. Thus, glue each next branch next to each other.

Take a candle of the required size and insert it inside the glass. The candlestick is ready for use.

Another option for making a candle holder is to simply take a thick candle and glue the twigs around the candle with a glue gun. Also, if the branches are painted gold, the effect will be more glamorous.

The branches are painted gold

Golden candlestick

House made of branches

An unusual craft for a child can be made from ordinary twigs. In the photo below, our reader shared his wonderful creation that he made for a child.

ADVICE: If you decorate the house with a garland you will get a great night light for a child's room!

House made of branches

How to make one like this

Photo frames made from tree branches

You can make unusual photo frames from dry branches with your own hands.

To do this we need:

• Dry twigs.
• Wooden base for frame.
• Hot glue gun.
• Decor (moss).

Step 1:

Take dry twigs. Using a hot glue gun. Apply glue to each branch with a glue gun and glue it to wooden base. Likewise, glue all subsequent branches side by side in the form of a rectangle.

Step 2

Then take a decorative material, in our case moss, and stick it in the corner of the frame. The result will be a wonderful composition.

Check out even more photo ideas on how you can arrange frames and displays of photographs in your interior.

Making a spring photo frame

Tree with photos in a vase

Pencil holder

This thing will look amazing on your desktop.

DIY pencil stand

You will need:

• A cut tree or stump, with a diameter of 10 to 15 cm and a thickness of about 10 cm (the photo shows such a “stump”, previously cleared of bark, but for a greater natural effect, you can leave the cut in its original form).
• A drill whose core drill diameter should not exceed 8-10 mm. A point drill bit is used to create shallow but clean, smooth-edged holes.
• Fine-grit sandpaper.

Step 1:

Take a drill, make 25-30 holes in the log house (depending on the diameter of the “hemp”), each at a distance of 0.5 - 1 cm from each other.

Make 25-30 holes in the log house

Step 2:

After this, take fine-grained sandpaper and sand the surface so that there are no unevenness.

Sand the base and top with sandpaper

After this, the stand is ready. It can serve not only for stationery, but also for art brushes.

Also check out other ideas on how to design a pen organizer.

Pencil holder

Stand for pens and phone

Clothes hanger

This craft will undoubtedly decorate your hallway and delight everyone who comes to visit you. You just need to choose branches that have fairly strong and thick hook knots. Hangers can also be made from small tree branches.

Clothes hanger in the hallway

You will need:

• Strong branches with thick knots with a diameter of 30-50 mm.
• Self-tapping screws.
• Saw on wood.
• Drill.
• Blank for the wall

Step 1:

We saw the trunk of the branch in half. We select a suitable workpiece with a length of 300-400 mm. Using a miter saw, we immediately form a hook. Using a saw, we cut off a branch from a branch at a distance of 50-120 mm. And then we cut half of the branch with a knot with a saw along the edges.

We select a suitable workpiece with a length of 300-400 mm.

Step 2:

Drill a hole in the hook with a self-tapping screw. And we attach it to the blank under the hanger. If desired, you can hang them individually or form a hanger. If the hanger is intended for light things, then you can attach the branches using wood glue.

Paint with white acrylic paint

If desired, these hooks can be painted with special paints for wood or use an aerosol spray.

The original hanger is ready

Flowerpot

In order for all the pots to be identical and original, you can make a flowerpot with your own hands. You will need a minimum of effort and a maximum of desire and good mood.

Flowerpot made from branches

To do this you need:

• Dry twigs.
• Saw on wood.
• A skein of twine thread.
• A piece of burlap.

Step 1:

To begin with, take dry twigs and use a wood saw to make them all approximately the same length.

cut the branches and tie them together

Step 2:

Then we wrap the flower pot or flowerpot with a piece of burlap. Secure it with any glue.

Step 3

Take the previously prepared branches, tie them together with twine so that the branches do not fall apart (see photo)

We wrap a piece of burlap around our old flowerpot

Step 4:

Then tie these branches around a pot or flowerpot and secure it with a bow.

Use a rope to secure the branches around the flowerpot

DIY hanging table

Hanging objects can add a feeling of weightlessness and airiness to any interior. A hanging wooden table can make a wonderful bedside table. It is attached to the ceiling with three ropes using a hook. How to make it? Necessary:

• Tablet.
• Grinder machine.
• Drill.
• Hot glue gun.
• Screw.
• S-shaped hook.
• Polyurethane spray.
• Felt strip.

Installation of a hanging table

Step 1:

First you need to choose a suitable board with an unusual texture. Sand all uneven surfaces with a sander.

Step 2:

Next, you need to drill three holes that will match the diameter of the selected rope. The holes should be equidistant from each other, and one of them should be located as close to the wall as possible. You can hang the table using four ropes, then you will need to drill four holes.

Step 3:

The wooden surface should be covered with several layers of polyurethane, allowing each of them to dry. Since the table will be adjacent to the wall, protect its surface from damage. To do this, glue a strip of felt to the part of the table that is adjacent to the wall with hot glue.

Step 4:

Next, pull the ropes through the holes and tie strong knots under the board. After this, you need to drill a small hole in the ceiling and insert a screw with a ring into which you should thread an S-shaped hook.

Step 5:

Then tie all the ropes at the top into a strong knot with a loop and hang the structure on the hook.

The result will be simply mesmerizing. Your hanging table will simply float in the room.

Decorative tree

To decorate the interior of your home, we suggest making a decorative tree with flowers.

You need:

• Twigs.
• Decorative flowers (can be made from paper).
• Sea pebbles.
• A piece of foam.
• Hot glue gun.
• An unusually shaped flowerpot (in our case, square).

Step-by-step production of decorative wood

1. Take sea pebbles and add them to the bottom of the flowerpot.
2. Then place the foam on the pebbles in the flowerpot and insert the prepared twig into this foam.
3. Fill it with sea pebbles again to make the branch more stable. Place the moss on top.
4. Now let's start decorating the branch. Take decorative flowers and glue them with a glue gun to the branch in a chaotic manner.
5. When you glue all the flowers, then your decorative tree will be ready to decorate your apartment or house.

Decorative tree painted gold

Decorative tree white

Wreath on the door made of twigs

This is the easiest master class that could be shown. Let's make a decorative wreath on the door from twigs. To start and finish our craft we need:

• Twigs.
• Copper wire.

Base blank for a Christmas wreath

Step 1:

Take copper wire and make a circle with a hook out of it (see picture).

make a circle out of wire

Step 2:

You need to make small bunches from the branches, fastening them with wire.

We tie the branches into small bundles

Step 3:

Then we screw bunches of twigs to a pre-prepared circle of copper wire. And so on until the end. Your wreath is ready. You can also decorate it with spray paint, giving it your favorite color.

We attach “bundles” of branches to the base

The wreath can be decorated as you wish. And make it either New Year’s or for another occasion

from spruce and pine in this article!

Decorating a mirror with branches

If you're tired of your old mirror and want to change it, don't rush. Using cuttings of branches, you can decorate your mirror, and it will sparkle with its beauty in a new form.

Mirror decorated with branch cuts

What is needed for this:

• Branches of different diameters.
• Wood file.
• Hot glue gun.

Work process:

1. Let's get to work. Take the branches and make cuts with a saw of the same thickness.
2. Then take a glue gun and glue each cut around the mirror. It will come out very original.
3. In the same way, you can paste over vases and flower pots, or whatever suits your imagination.

You can also make something like this from small boards - LESSON here!

Wall decor

Using branches you can make various decorations — — Take a look and you'll definitely find something for yourself!

And now we offer a simple master class on making a seahorse. It will decorate your room, giving it uniqueness. To make the decor more original, come up with your own figurine.

Branch decor for the wall

To do this you need to have:

• Twigs different sizes and diameters.
• Secateurs for branches.
• Hot glue gun.
• Cardboard, pencil, scissors.

Step 1

Draw some kind of figure on cardboard, for example a sea horse. And cut with scissors.

Cutting out a shape from paper

Step 2

Take a hot glue gun, apply glue to the branches and glue them onto the cardboard blank, aligning them one to one.

Step 3

When you're done gluing. Take a branch pruner and cut off any branches that extend beyond the edges of your base. This will make a very beautiful wall decor.

In a similar way, you can make crafts for the New Year in the form of a Christmas tree, decorating it with decor, or a star on the door, crafts for Valentine's Day.

Heart made of twigs