Garage project 10 by 10. Garage projects. How to improve the thermal insulation properties of a garage

Somehow I deprived men of my attention! But they also want to have their own shelter - a cave in the country and best option than building a garage or workshop, I don’t see. So, men don’t like long introductions, so let’s get straight to the plans. On the first one we see a two-story garage with a studio room. Convenient, one might even say ideal! Dimensions are in feet and inches, use the calculator to convert to cm.

A simple small beautiful garage for your country house

Garages on summer cottages are usually built separately from the house, as space allows. Look how handsome stylish project I found a garage! Small, compact, beautiful! There is even a canopy with a bench for relaxing.

Garage for two cars with attic

This is a real man's nook, with living quarters on the second floor. The garage itself is for two cars. If the space of the site allows, then such a garage can be considered the standard of a man’s home.

All dimensions are given in feet and inches. Convert to centimeters using special services on the Internet - it’s not difficult.

A neat project for a 3 by 8 meter garage with living space on the second floor. A special feature of this option is the balcony.

The staircase to the second floor of the garage is located on the street, on the side. There is a utility block in the garage itself. On the second floor there is a living space with a kitchen, as well as a bedroom and a bathroom with a bath. In fact, this is a complete home for a bachelor! or a secluded place for a man who wants to relax.

Well, a few views of the second floor:

Disadvantages of a warm garage in winter

By the way, there is an opinion that a car rots in a warm garage. This is true, so it is better not to heat the lower room. Warm home garage can cause aging of a car in winter, since it is in winter that roads are sprinkled everywhere with salt and other chemical elements.

This happens because in a closed and heated room the machine begins to thaw. Splashes and salt residues thaw and the body quickly becomes corroded.

A car protected from the weather by only one roof or the walls of a detached cold garage will last much longer. Not worth building warm garage only because the car will start faster when warm.

In this case, it is easier to install an electric heating system in the car. This will save both nerves and finances. If you already have a built-in garage, then it is better to make it guest room or a gym.

Scheme of a simple garage made of foam blocks

If you need a simple garage made of foam blocks, then here you go standard sizes. There is nothing special to describe here, the plan is extremely simple.

More nice option foam block garage

A worthy project for a garage made of foam blocks for one car. Practical design roofs, two windows, small room for relaxation also with a window.

Video from a masonry master - a garage made of cinder blocks in 2 days

In addition to the plan for a garage made of foam blocks, I recommend watching a video in which a masonry master shows and tells how they built a garage for a friend in two days. The video is lively and interesting, showing the construction process with humor and language.

Construction of a cold garage

When building a cold garage, special attention should be paid to the thermal insulation of the room. After all, in the event of a hit warm air On the cold surface of the garage walls, moisture will begin to condense and flow onto the floor.

The gate will also become covered with droplets of water, which will get into the locks or thresholds, and in winter conditions this can lead to the garage simply not opening in the morning. Constantly wet metal elements They will quickly begin to rust.

Project of a two-story garage 8 by 8 for 2 cars

This option is more strict, unlike the first, which, in my female opinion, is more beautiful. Men, I know, don’t need all these decorations, however, since we are talking about a garage at home, women’s opinions should also be taken into account. This project is a garage for 2 cars with a residential second floor.

How to improve the thermal insulation properties of a garage

The walls of the box are made of foam blocks. The roof should also be insulated. The garage door should also be insulated with sheet foam, the thickness of which is 4 - 6 cm, then covered with plywood or wooden clapboard. It will be easier to insulate the garage from the inside with full sheathing OSB boards thickness 16 - 22 mm.

Project of a two-story garage 4 by 8 meters for 1 car

Here's a simpler project two-story garage for one car. I’m even envious - such nice, functional houses - on the second floor there is a shower where you can wash off the dirt, a kitchenette and a relaxation room where you can sit with friends and cheer for your favorite sports team.

Video - workshop garage with attic

An interesting video from Forumhouse about how a man built himself a garage - a workshop with an attic. Not finding anything suitable in the search, he decided to build according to an individual plan. See the story and description of the construction of this structure from the author.

Ventilation

With the help of supply and exhaust holes we make natural ventilation garage. The main structures of the garage must also have openings - floors, walls, partitions, doors.

It is better to place these holes diagonally from each other. The supply openings should be located 20 - 25 cm above the floor, and the exhaust openings 10 - 15 cm below the ceiling. All holes should not exceed 0.3% of the entire garage area, otherwise the pull will be poor.

Budget two-story garage project

This project is designed for one car, as well as an open floor plan on the second floor. With a budget design, a single space for a closet or a full-fledged recreation area for a man can be organized on the second floor.

Shed instead of garage

If you decide to limit yourself to only a canopy for your car, then you should remember that you must ensure proper strength support posts. This is especially important during winter snowfalls, when the roof must withstand significant loads.

Project of a one-story garage 8 by 8 meters for 2 cars

And this is a project of one floor, but for two cars, or for one, but with more space for a workshop. I repeat that all dimensions are in feet and inches; you can convert them to centimeters yourself.

Video review of the garage

If you are interested in how to optimize the space of your garage, I advise you to watch a video from Evgeniy, who built himself a garage with an attic with his own hands. The author talks and shows his garage for diagnosing and working on clients’ cars. that is, this is a truly professional car repair shop.

By the way, I was interested in the project of a garage with a bathhouse. I don’t know about you men, but this already seems like overkill to me. A shower cabin is enough for you, but make a bathhouse for the whole family :)

Construction of a garage

  • Brick garage - from 16,000 rub/m2
  • Foam-gas-concrete garage - from 11,000 rub/m2
  • Frame garage- from 8000 rub/m2
  • Garage made of profiled timber - from 12,000 rub/m2
  • Garage made of laminated veneer lumber - from 16,000 rub/m2
  • Garage made of rounded logs - from 13,000 rub/m2
  • Garage made of reinforced concrete slabs - from 24,000 rub/m2
  • Metal garage (LSTC/corrugated sheeting) - from 5,500 rub/m2

Construction of a canopy

  • Carport made of polycarbonate on iron poles - from RUB 3,300/m2
  • Cantilever carport - from 4700 RUR/m2
  • Forged carport - from 5100 RUR/m2
  • Carport made of corrugated sheets - from 4000 rub/m2
  • Carport made of metal tiles - from 4100 rub/m2
  • Carport made of wood - Individually

Roofing

Rafter system from 300.00 rub. m2
Lathing from 150.00 rub. m2
Sewing the gables edged board from 150.00 rub. m2
Covering gables with siding, block house, clapboard, etc. from 300.00 rub. m2
Laying under-roof hydro-wind insulation from 100.00 rub. m2
Laying roofing felt from 100.00 rub. m2
Laying Ondulin from 250.00 rub. m2
Laying metal tiles from 300.00 rub. m2
Laying flexible tiles from 400.00 rub. m2
Laying OSB - plywood from 200.00 rub. m2
Insulation of roof slopes from 150.00 rub. m2
Installation drainage system from 250.00 rub. p.m.

Prices for garage foundations

  • Strip foundation(height 60cm - thickness 30cm) - from 3000 rub/m.p.
  • Strip foundation (height 80cm - thickness 40cm) - from 4350 rub/m.p.
  • Monolithic slab(height 20cm) - from 3500 rub/m2
  • Monolithic slab (height 30cm) - from 4360 rub/m2

Cost of one screw pile with screwing and concreting

  • pile thickness 89 mm. + height 1.5m - 3,000 rub.
  • pile thickness 89 mm. + height 2.5m - 3,200 rub.
  • pile thickness 89 mm. + height 3m - 3,300 rub.
  • pile thickness 108 mm. + height 1.5m - 3,100 rub.
  • pile thickness 108 mm. + height 2.5m - 3,400 rub.
  • pile thickness 108 mm. + height 3m - 3,500 rub.

Electro installation work

Assembly, installation and assembly of electrical panels Unit change Price
Installation of outdoor electrical panel PC. from 800 rub.
Installation of a hidden electrical panel PC. from 1500 rub.
Installation of an electrical panel without an electric energy meter PC. from 2000 rub.
Installation of an electrical panel with an electric energy meter PC. from 2500 rub.
Installation and disconnection of junction boxes 3 Unit change Price
Up to 4 cables for open wiring By soft material(tree) PC. 350 rub.
Up to 4 cables for open wiring hard material(brick/foam concrete/concrete) PC. 400/450/500 rub.
Up to 4 cables for electrical wiring under plasterboard PC. 350 rub.
Up to 4 cables for hidden electrical wiring in foam concrete/brick/concrete PC. 500/550/600 rub.
From 5 cables for open electrical wiring on soft material (wood) PC. 450 rub.
From 5 cables for open electrical wiring on solid material (brick/foam concrete/concrete) PC. 500/550/600 rub.
From 5 cables for electrical wiring under plasterboard PC. 450 rub.
From 5 cables for hidden electrical wiring in foam concrete/brick/concrete PC. 600/650/700 rub.
Installation (laying) power cable up to 4 mm2:2 Unit change Price
Opened directly to the wall using brackets m/n. 50 rub.
Open in corrugated pipe on soft material (wood) m/n. 100 rub.
Opened in a corrugated pipe over solid material (brick/foam concrete/concrete) m/n. 150/150/150 rub.
Opened into a cable channel on soft material (wood) m/n. 100 rub.
Opened into a cable channel on solid material (brick/foam concrete/concrete) m/n. 200/200/200 rub.
Hidden in foam concrete m/n. 300 rub.
Hidden in brick m/n. 350 rub.
Hidden in concrete m/n. 400 rub.
Installation of a new electrical point (socket/switch)1 Unit change Price
Open electrical wiring on soft material (wood) PC. 200 rub.
Open electrical wiring on solid material (brick/foam concrete/concrete) PC. 250/250/250 rub.
Electrical wiring for plasterboard PC. 250 rub.
Hidden electrical wiring in foam concrete PC. 300 rub.
Hidden electrical wiring in brick PC. 350 rub.
Hidden electrical wiring in concrete PC. 400 rub.

Finishing work

  • Installation of an electrical kit inside the garage - from RUB 10,000.
  • Production of garage concrete floors - from RUB 25,000.
  • Replacement. Manufacturing wooden floors- from 20,000 rub.
  • Interior decoration of the garage with dry eurolining - 800 rubles. per m2
  • Manufacturing of metal gates with a wicket and painting - from RUB 30,000.
  • Set overhead sectional doors+ installation - from 45,000 rub.
  • Redecorating inside the garage - from 1500 rubles. per m2

Materials for roof installation.

Finishing materials and their properties.

Correct layout in the garage.

Garage doors, their types and features.

Decoration of internal walls.

Shelving in the garage.

Multifunctional shelf racks.

Equipment option

Components

Garage price

Price with shipping

and installation

Basic option

  • load-bearing frame
  • roofing - metal tiles
  • walls - corrugated sheets
  • swing gates

190,000 rub.

RUB 222,000

Advanced option

Basic option +

  • drain
  • sectional doors
  • window
  • door

RUB 380,000

RUB 428,000

Insulated option

Advanced option +

  • insulation
  • interior finishing - corrugated sheets

RUB 453,000

RUB 524,000

Additional services:

Sandwich panel garage

Car owners are often faced with the issue of storing their iron horse. Many solutions can be found, but one of them will be truly unusual. This garage made of sandwich panels.

Structure:

The sheets of such panels consist of thin galvanized steel. The thickness is 50 millimeters. This is quite enough for the structure to be rigid and securely held in place. Expanded polystyrene is used as insulation. This material is reliable, does not burn well, and most importantly, it perfectly retains heat indoors. The insulation is attached to the galvanized workpiece using a one-component adhesive. The types of adhesive may vary depending on the manufacturer, but the assembly system is almost the same everywhere.

It is worth noting that sandwich panels use Z-Lock type fastening. It gives reliable adhesion between the plates.

Pros:

It is necessary to say a few words about the useful aspects of use and installation of a garage made of sandwich panels.And the advantages are as follows:

  • perfectly retains heat indoors, even if it is -30 outside;
  • the relief of the panels on the outside resembles siding;
  • the entire garage assembly process takes no more than 6-7 days;
  • installation can be carried out at any time of the year and in any weather conditions;
  • after assembly there is a minimum of waste;
  • to do turnkey sandwich panel garageno need to obtain a building permit;
  • all materials used are completely harmless;
  • not required additional insulation using foam blocks;
  • if necessary, the structure can be disassembled very quickly and transported to the desired location.

Where to get:

If there is a need to put the car in heat, then you can buy a ready-made garage made of sandwich panels.It will be very fast, but it will cost a pretty penny. If desired, you can hire workers.

Cost of assembling a garage from sandwich panels will be slightly lower, in contrast to the finished version.

DIY garage

The cheapest one will be self-construction. However, you must remember to develop garage project made from sandwich panels.The construction principle is quite simple. The key point a reliable foundation will be poured and doors will be installed. This process is labor-intensive, but quite fast with sufficient skill.

This, in fact, is the entire algorithm for building a reliable garage from sandwich panels.This kind of building is convenient and quality option when choosing a garage.

Garage frame or sandwich panels

Car owners know in order to vehicle for a long time retained its spectacular appearance and worked flawlessly, you need to create optimal conditions. This is especially important in winter and summer period when precipitation is longest. The best alternative will become garage frame or sandwich panels, which is distinguished by its manufacturability and relatively inexpensive cost.

Our company manufactures and sells various metal structures, the purpose of which is to create excellent conditions for parking a car. One of the directions is production of garages from sandwich panels. Understanding perfectly the wishes and requirements of clients, we offer a large assortment ready-made structures, differing in color scheme, configuration and size. If your family has several cars, we will offer you the appropriate options. Our garages have aesthetic appeal, so they can decorate any country cottage area. You can also choose gates that differ in the opening method.

If you buy a garage made of sandwich panels in our organization, then you get high-quality and robust construction at manufacturer's price. But this is not all the advantages of our products.

Advantages of frame garages

  • Quick installation. Unique properties Sandwich panels allow you to install a garage in the shortest possible time;
  • Light weight of the panels and the garage as a whole during installation does not require the use of bulk construction equipment. This is because modular garage made of sandwich panels does not require a capital foundation. This aspect significantly reduces installation costs;
  • After completing all work on the installation of the structure, construction garbage practically absent;
  • The panels initially have an attractive appearance, so there is no need to make additional external finishing. Which allows you to significantly save your budget;
  • Possibility to carry out installation work at any time of the year;
  • High sound and thermal insulation properties;
  • Prefabricated garage made of sandwich panels price which is very attractive, if necessary it is easy to disassemble and reassemble in another place;
  • Durability and practicality. Our structures are so multifunctional that they can be used without any problems as a warehouse for storing vegetables and equipment;
  • The operating period of our company's garages is at least 50 years;

Construction of a garage

  • Brick garage - from 16,000 rub/m2
  • Foam-gas-concrete garage - from 11,000 rub/m2
  • Frame garage - from 8000 rub/m2
  • Garage made of profiled timber - from 12,000 rub/m2
  • Garage made of laminated veneer lumber - from 16,000 rub/m2
  • Garage made of rounded logs - from 13,000 rub/m2
  • Garage made of reinforced concrete slabs - from 24,000 rub/m2
  • Metal garage (LSTC/corrugated sheeting) - from 5,500 rub/m2

Construction of a canopy

  • Carport made of polycarbonate on iron poles - from RUB 3,300/m2
  • Cantilever carport - from 4700 RUR/m2
  • Forged carport - from 5100 RUR/m2
  • Carport made of corrugated sheets - from 4000 rub/m2
  • Carport made of metal tiles - from 4100 rub/m2
  • Carport made of wood - Individually

Roofing

Rafter system from 300.00 rub. m2
Lathing from 150.00 rub. m2
Covering gables with edged boards from 150.00 rub. m2
Covering gables with siding, block house, clapboard, etc. from 300.00 rub. m2
Laying under-roof hydro-wind insulation from 100.00 rub. m2
Laying roofing felt from 100.00 rub. m2
Laying Ondulin from 250.00 rub. m2
Laying metal tiles from 300.00 rub. m2
Laying flexible tiles from 400.00 rub. m2
Laying OSB - plywood from 200.00 rub. m2
Insulation of roof slopes from 150.00 rub. m2
Installation of a drainage system from 250.00 rub. p.m.

Prices for garage foundations

  • Strip foundation (height 60cm - thickness 30cm) - from 3000 rub/m.p.
  • Strip foundation (height 80cm - thickness 40cm) - from 4350 rub/m.p.
  • Monolithic slab (height 20cm) - from 3500 rub/m2
  • Monolithic slab (height 30cm) - from 4360 rub/m2

Cost of one screw pile with screwing and concreting

  • pile thickness 89 mm. + height 1.5m - 3,000 rub.
  • pile thickness 89 mm. + height 2.5m - 3,200 rub.
  • pile thickness 89 mm. + height 3m - 3,300 rub.
  • pile thickness 108 mm. + height 1.5m - 3,100 rub.
  • pile thickness 108 mm. + height 2.5m - 3,400 rub.
  • pile thickness 108 mm. + height 3m - 3,500 rub.

Electric installation work

Assembly, installation and assembly of electrical panels Unit change Price
Installation of an external electrical panel PC. from 800 rub.
Installation of a hidden electrical panel PC. from 1500 rub.
Installation of an electrical panel without an electric energy meter PC. from 2000 rub.
Installation of an electrical panel with an electric energy meter PC. from 2500 rub.
Installation and disconnection of junction boxes 3 Unit change Price
Up to 4 cables for open wiring on soft material (wood) PC. 350 rub.
Up to 4 cables for open electrical wiring on solid material (brick/foam concrete/concrete) PC. 400/450/500 rub.
Up to 4 cables for electrical wiring under plasterboard PC. 350 rub.
Up to 4 cables for hidden electrical wiring in foam concrete/brick/concrete PC. 500/550/600 rub.
From 5 cables for open electrical wiring on soft material (wood) PC. 450 rub.
From 5 cables for open electrical wiring on solid material (brick/foam concrete/concrete) PC. 500/550/600 rub.
From 5 cables for electrical wiring under plasterboard PC. 450 rub.
From 5 cables for hidden electrical wiring in foam concrete/brick/concrete PC. 600/650/700 rub.
Installation (laying) of power cable up to 4 mm2:2 Unit change Price
Opened directly to the wall using brackets m/n. 50 rub.
Opened in a corrugated pipe over soft material (wood) m/n. 100 rub.
Opened in a corrugated pipe over solid material (brick/foam concrete/concrete) m/n. 150/150/150 rub.
Opened into a cable channel on soft material (wood) m/n. 100 rub.
Opened into a cable channel on solid material (brick/foam concrete/concrete) m/n. 200/200/200 rub.
Hidden in foam concrete m/n. 300 rub.
Hidden in brick m/n. 350 rub.
Hidden in concrete m/n. 400 rub.
Installation of a new electrical point (socket/switch)1 Unit change Price
Open electrical wiring on soft material (wood) PC. 200 rub.
Open electrical wiring on solid material (brick/foam concrete/concrete) PC. 250/250/250 rub.
Electrical wiring for plasterboard PC. 250 rub.
Hidden electrical wiring in foam concrete PC. 300 rub.
Hidden electrical wiring in brick PC. 350 rub.
Hidden electrical wiring in concrete PC. 400 rub.

Finishing work

  • Installation of an electrical kit inside the garage - from RUB 10,000.
  • Production of garage concrete floors - from RUB 25,000.
  • Replacement. Manufacturing of wooden floors - from RUB 20,000.
  • Interior decoration of the garage with dry eurolining - 800 rubles. per m2
  • Manufacturing of metal gates with a wicket and painting - from RUB 30,000.
  • Set of overhead sectional doors + installation - from RUB 45,000.
  • Cosmetic repairs inside the garage - from 1500 rubles. per m2

Well, finally the completion of the house has reached the finish line, fine finishing and I got to my “den”. There is just a little left and the purely personal territory will be ready for its purpose.
Let me digress a little: why “from a professional garage organizer”?
It may not be written down correctly, but for the last 25 years I have been working as the head of a company that supplies car repair shops, corporate garages and other motor vehicles with auto repair equipment, tools, etc.
During this time, thousands of different facilities have been completed, from provincial tire shops to dealership centers. Now it’s time to create the first car nest for yourself - and that’s what was created.
I want to say right away that now I would do everything completely differently. I would have taken out the garage separately, doubled the area. In some places I simplified things, in others I did things differently, the wild fantasies of the design remained unfulfilled - but what’s done is done.
Project: purely for the size of the house, an area was laid out to accommodate 2 cars + a mini-instrumental area.
8 m wide under a PC slab supported on a block - clean inner size 7.5 in length 8 .. in front of the garage there is a platform of 6 meters and a gate is in the plans for the summer.
The foundation - due to the fact that the house stands on a former water meadow on a bulk sand cushion, there was only one option: a monolith slab, one for everything at once, both for the garage and for the bathhouse and for the house.
After fbs blocks+ where the house has floor slabs (beneath them is a 1.5 m basement technical floor... there is no technical basement in the garage - there was sand filling there to level the level.
Accordingly, the garage is 1 m below the 1st floor of the house. Well, actually, you can see the drop in the stairs. On top there are 8 meter floor slabs.
There is a load-bearing beam in the middle of the garage; the outer wall of the 2nd floor rests on it. that is, the garage is half in the house and half out.
Subfloor: 1 m of sand was poured directly onto the slab, it lay there for 1 year, then vibrating rammer, geotextile, crushed stone + vibrating rammer, 10 mm reinforcement on top with a step of 20 x 25 cm in one layer. The concrete is approximately 10-12 cm thick and is made with a slope on which the tiles are laid.
Drainage system: a garage heated by the house heating system means that ice will drain from the car. Therefore, in the center there is a slope into the sewer canal, at the end of the canal there is a sand trap and from there it drains into the underground collector ( plastic barrel 200 l upside down, covered with earth
This part was somewhat troublesome - because in addition to the slope into the drain from the walls to the center, it was also necessary to make a slope from the far edge to the entrance.
Technically: first, they laid a rough drain template from polystyrene foam and boards, cast concrete - and then, having a margin of 1 cm along the contour, they poured the solution into the ditch and drowned the drainage channel in it at the desired angle. The channel itself is quite widespread. Gidrolika is a Russian product, a standard product for Leroy Merlin, Castorama and other household supermarkets. I have a galvanized option, there are cheaper cast iron or plastic, the drain from the sump to the street goes through a 50-60 mm underground plastic pipe.
The ceiling - the half where the gate is attached (to the beam) is plastered and painted ceiling paint regular with Leroy. In the area above the workbench under the ceiling there are a lot of communications - so tomorrow/the day after tomorrow I will cover it with a suspended ceiling.
Gate: at first I was planning on Alutech, but somehow one of the organizations offered Hermann at a very close price and I decided on the Germans... no questions about them... quietly, neatly, clearly
In the future, I plan to connect the entrance gate to the site to one remote control. An important point from a design point of view: lay cables under the sockets.
I already had the slabs plastered and then bam, I remembered. Okay, the hollow core slabs are lying on top - half an hour of work with a hammer drill / 3 holes, a cable was hooked into them with wire and brought out to the required points, the holes were closed with a socket.



 
Articles By topic:
How and how long to bake beef
Baking meat in the oven is popular among housewives. If all the rules are followed, the finished dish is served hot and cold, and slices are made for sandwiches. Beef in the oven will become a dish of the day if you pay attention to preparing the meat for baking. If you don't take into account
Why do the testicles itch and what to do to get rid of the discomfort?
Many men are interested in why their balls begin to itch and how to eliminate this cause. Some believe that this is due to uncomfortable underwear, while others think that it is due to irregular hygiene. One way or another, this problem needs to be solved.
Why do eggs itch?
Minced meat for beef and pork cutlets: recipe with photo
Why do eggs itch?
1 2 3 Ptuf 53 · 10-09-2014 The union is certainly good. but the cost of removing 1 kg of cargo is still prohibitive. Previously, we discussed methods of delivering people into orbit, but I would like to discuss alternative methods of delivering cargo to rockets (agree with