≡× MENU

• Interior
• Window
• Walls
• Projects
• The buildings

Chandelier made of copper pipes. DIY lamps and lamps made from pipes: four simple instructions. Main stages of work

One of the tools that helps create a comfortable environment in the home is beautiful lamp. The stores offer a wide variety of models. The better and more beautiful the device, the more expensive it is. Therefore, many craftsmen decide to make lamps from pipes with their own hands. There is nothing complicated in such a process: having simple parts available, you can make unique design. Plumbers can make such devices with particular ease.

In this article:

Assembling a chandelier from pipes

Conventional chandeliers are chosen as the main source of light in living rooms, kitchens and bedrooms. A device made from scrap materials will help you diversify the design of your room and stand out from your friends and acquaintances.

To assemble a lamp from polypropylene pipes and fittings, you will need the following components:

• a lampshade with a grille from an industrial lamp;
• two segments plastic pipes;
• the wire;
• plumbing tee and angle;
• two flanges, the same size as the cartridge;
• wooden block or other base;
• spray paint;
• paper;
• screwdriver and screws.

First, disassemble the lampshade by removing the grille and socket; if a lamp with a grille looks good in your interior, then leave it. Screw the metal flange onto the outside of the cartridge. Be careful not to damage the wires.

Screw the plastic pipe to the metal flange, then attach the angle in series, then another piece of pipe, a tee, and finally end with the flange again. With each new part don't forget to stretch the wire.

Make several of these structures, and after everything is ready, they can be screwed to a wooden base. Don't forget to bring out and connect the cables to central system. Ready product can be painted in any color so that it matches the interior of the room. Don't forget to lay down paper before doing this so as not to stain the floor. Screw in the lamp and, by flicking the switch, check the functionality of the PVC pipe lamp.

By excluding the corners from the design and lengthening the plastic pipe, you can make a floor lamp. The main thing is to prepare a stable foundation.

Wall lamp made of flexible metal-plastic

You can assemble it yourself Wall lights from water pipes with turning lamps. To change the angle of incidence of light, it will be enough to turn the lighting fixture in the desired direction. During work you will need:

• flexible plastic pipes 20-50 cm long;
• solid birch, pine or thick plywood for the base;
• electrical wire;
• socket and lamps;
• jigsaw;
• screwdriver and screws;
• spray paint and paper;
• sealant.

We make holes in the base that match the diameter of the pipe. From a small block, cut out a place for attaching the cartridge, do not forget that with reverse side A metal-plastic body will be supplied. Pull the wire through the flexible base and the wood or plywood.

We insert the metal-plastic pipe into the base and secure it with screws or glue. We fix the cartridge in the prepared block, and isolate the contour with sealant. Ready design We paint it from plastic pipes in a pre-selected color and after drying we hang it on the wall.

You can make or buy a beautiful floor lamp to go with the socket - then the pipe lamp will look more attractive.

Coupling table lamp

Let's go back to the loft style, only now we'll do it table lamp with one light source. It is suitable for a study at home or office. Depending on the chosen light source, such a product will help you either concentrate or relax.

Required tools and materials:

• long and short nipple;
• fitting (six metal corners and three tees);
• six small nipples that will connect the corners;
• drill with metal drill bit;
• wire with plug and switch;
• glue;
• insulating tape.

Prepare metal parts, having previously cleared them of greasy stains white spirit. Since the reins will need to be pulled through narrow holes, cut out the switch. Screw the lamp into the socket and insert it into the first square, first pulling the wire through the part. Secure the lighting fixture in the designed position with glue.

Make a hole in one of the tees for the cable outlet. In order not to make a mistake with the drilling location, imagine how the lamp will stand.

We screw small nipples to the central tee with a hole. We connect tees with nipples and corners on the sides to them. This will be the base of the product. We screw the corner in which the lamp socket is located to the long nipple, followed by the corner and the short nipple. We connect the two parts of the lamp together. Don't forget to run the wire in advance. Reinsert the switch and check the operation of the desk lamp.

Such lighting fixtures made from parts of the pipeline will show guests and family your resourcefulness. When you see the finished result, you will experience great joy and pride. DIY lamps will last a long time and will never go out of style.

Designer lighting fixtures are sold at incredible prices. In fact, making a lamp from pipes yourself is not a problem at all. This does not require the purchase of expensive materials or in-depth knowledge of electrical engineering. Let's consider several options for homemade lighting elements from scraps of various pipes.

Desk lamp

An original lamp made of pipes will add some zest. The structure can be assembled from scraps available on the farm or purchased material at a hardware store. After purchasing all the materials, it will take no more than an hour to assemble the lamp.

Among the required components:

• Long and short nipple.
• Six pipe squares.
• There are the same number of small nipples that serve as corner clamps.
• Three purposes.
• Drill.
• Wire with switch and plug.
• Insulating tape.
• Hot glue.

First, all pipes are treated with solvent, and the stickers are removed. The light element is inserted into the socket, after which the wire is pulled through the square. The light bulb socket is fixed with glue. The structure is processed carefully so as not to affect the threads, after which it is left until the adhesive composition dries.

Main stages of work

Subsequent assembly of the lamp from pipes is carried out in the following sequence:

• Prepare a hole in the tee for the wire on the reverse side using an electric drill.
• Pipes are assembled along threads using nipples.
• 4 corners are taken as the base, three tees are twisted together, the standard hole is directed upward, and the homemade socket is directed to the lower invisible part.
• Two nipples connected to each other will serve as a holder.
• The cable is pulled through pipes without a switch.
• The switch is assembled and connected.
• The functionality of the assembly made from pipes is checked.

This design is easy to fix if you are not satisfied with the resulting design. The result is an excellent and inexpensive night light or work desk lamp.

Wall option

The pipe lamp, the photo of which is shown above, is made as follows:

• The grille is removed from the old street-type lamp. If it fits into the interior, this is not necessary.
• A pipeline flange is attached to the cartridge, which will serve as a base fixed to the wall.
• Then it is connected to a tee, nipple and angle. Another flange is attached, then the wiring is pulled through the pipes.
• The height of the lamp placement is adjustable.
• The lamp is connected to the socket and the switch is mounted.
• The flange is attached to the wall using screws, and the operation of the device is checked.

The operation will require the following materials:

• Lamp with or without grille.
• A pair of black nipples for plumbing purposes.
• Cable.
• Two metal flanges, the diameter of which matches the size of the cartridge.
• Screwdriver and fixing screws.

Loft lamps made of pipes with a concrete base

The lampshade is made from several wooden embroidery hoops and watercolor paper. The whole process is divided into mold preparation, manufacturing concrete base, connecting wiring, assembling and fixing pipes, as well as arranging a lampshade. The container for pouring can be made of plastic; its dimensions must be sufficient to support the weight of the entire structure.

Initial stages:

1. Using a knife, make a hole for the cable.
2. The reinforcement wire is placed in a container.
3. The cord is threaded through the pipes with the necessary margin.
4. Marking tape is used to mark the exit of wires from the solution.

The cord must fit into cement mixture at the point of connection to the switch, then fed through the middle part of the pipe flange, in which a hole is provided.

Final part

Further production of a lamp from water pipes is divided into several stages:

• Done cement mortar, which is poured into the prepared form.
• The switch is fixed flush with the surface. Be careful not to let it drown in the mixture.
• Mount the flange on top of the solution, thread four mounting screws through the holes.
• After preparing the base, thread the wires through the pipes, attaching them to the flange.
• Next, the free edge of the cables is pulled to the cartridge, after which the latter is attached inside the pipe.
• The light bulb is screwed in, the switch is connected and turned over.
• A lamp with a low power rating can be left open.
• For a powerful light element you will need to build a lampshade. To do this, take two hoops and watercolor paper, and treat the seam with wood glue.
• This design allows you to choose any color and fabric covering used.
• The finished lampshade is attached using small screws that are screwed into the inside of the hoop from above, or with a thin wire attached to an additional flange of the pipe.

LED lamp

PVC pipe is optimal for this device. It is worth noting that this option is equipped with autonomous power supply. The design of the lamp is as simple as possible; anyone can assemble it with a minimum of tools and materials. Several pieces of pipe will be required bigger size for the base, including angles and fittings, as well as a smaller diameter PVC pipe for the stand. The system uses a resistor with a power of at least 1 watt. This indicator is designed for 6 LEDs.

The circuit is connected in the standard way. It is recommended to use type. This will allow you to quickly make a nest for it in the pipe and will not require cutting additional elements in the form of a rectangle under the slide switch. In addition, the switch should not be instantaneous, otherwise you will have to constantly hold the button to operate the device. The lamp made of PVC pipes is equipped with a lampshade. Its painting is carried out in several layers. Otherwise, when the diodes are turned on, streaks or uneven processing will be visible. A battery of suitable capacity is mounted at a distance of 80 millimeters from the edge of the pipe at the base. You can also install a switch there. The main thing is that these details do not interfere with each other.

Loft chandelier made of pipes

Modern trends in lighting organization often require taking into account not only the efficiency of lamp elements, but also the chandeliers themselves. You can create them yourself from scrap materials, while getting an original and inexpensive design. For example, it is possible to do ceiling lamp from plastic pipes. To do this you will need the following components:

• Ceiling type socket.
• 12 branches for sockets and light bulbs.
• Polymer water pipes.
• 12 small lamps.
• A can of special paint.
• Paper.
• Ceiling rosette.

The work begins with developing a model of the chandelier and connecting the branches to each other. You can create both a symmetrical design and an original author’s model (it all depends on your imagination). Next, lay out the paper on which the painting process will take place. Paint on all sides and leave the lamp to dry. The ceiling rosette is painted on the visible side. If necessary, the chandelier can be sprayed again. Then all that remains is to connect the structure to the ceiling using screws and a flange, and also screw in the lamps. Check the design and enjoy a unique product. By the way, if you get tired of the configuration of the lamp, it can be transformed into a different style in a few minutes.

Adjustable Table Lamp: Initial Manufacturing Process

This DIY pipe lamp is distinguished by the fact that it can be adjusted in reach and height. Many replacement parts are available to find at home, so it is also economical and also custom.

Materials used:

• Bicycle star.
• Pair metal pipes with half-inch thread (length - 450 mm).
• Flange.
• Fitting.
• Two elbows at 45 and 90 degrees.
• Two ¾ copper tubes.
• Socket.
• Polymer bushing.
• Electrical cable.

The bicycle sprocket will serve as the base. Holes for the flange are drilled in its center, after which it is painted. Then it is screwed into the flange iron pipe. The upper part of the element is attached to the base of the lamp, and the second part with a larger diameter is installed in such a way that a sliding effect appears. This will allow you to recline top part structures by moving the top tube.

Final part

To fix the pipe, a hole is drilled in the lower compartment for the fixing screw. A pipe with a diameter of ¾ is soldered, which will allow for alignment and also obtain original look. As a stopper, you can use a ¼ bolt, which is attached to the outer handle of the faucet. The lampshade can be made using one of the methods described above, attaching it with screws and painting it with copper or gold paint.

The rubber bushing is mounted in the opposite end of the fitting, after which the end of the wire is cut off and pulled inside the pipe to the cartridge. The lamp is screwed into the socket, around which the casing is clamped. A similar lamp made from water pipes will make it possible to provide required quantity light at different conditions. At the same time, its cost is minimal.

One day Brynne Delerson saw the lamp of her dreams and lost her appetite and sleep.

Then she decided that she could make it herself. She carried this idea in her head for several months, carefully drew up diagrams and gained courage.

Several times, she convinced herself that she was fearless, but her creative side was always outweighed by perfectionism. She was frightened by the process itself, the tools, as well as the lack of skills needed to turn the idea into reality, so she thought, wrote down and shelved the project. She didn’t want to dive headfirst and hope for the best; she had a goal: to work through all the scenarios to avoid the zombie apocalypse.

And the project of the century was waiting in the wings. Then one fine day, the girl felt unusually brave and decided to take part in a competition to make lamps with her own hands. About 300 people took part in this competition and only 12 projects were selected. This project, unfortunately, was not selected. And Brynne shed a lot of tears about this. For this project you will need:

1. Pendant lamp from Ikea called Photo.
2. Copper pipes
3. Protractor, ruler, tape measure
4. Pipe cutter
5. Copper wire

Step 1: Math. The heroine of our story drew a circle, divided it into 5 parts using a protractor, each section 72 degrees. By simple calculations, the size of each pipe was determined to be 19 cm.

Step 2: Spray paint the lampshade. We were lucky, Russian IKEA sells black lamps, so we skip this step.

Step 3: Cut the pipe

We mark the cutting location using a tape measure, 7.5 inches or 19 cm.

Let's cut it off.

Step 4. Clean the pipe. After all 30 tubes were cut, we took steel wool and polished them, polishing took 15 minutes.

Step 5: Assembly. We start it with a triangle, when you run out of wire, you need to fasten the new wire to the old one so that the connection is inside the pipe. Don’t forget to immediately secure the wire from the lamp with wire at one of the points.

You can see how to assemble an icosahedron here:

Step 6: Hanging the Lamp

As an afterword: I really liked the idea of ​​​​making an icosahedron lamp from copper pipes. But instead of the Photo lampshade, I would screw an Edison lamp inside the icosahedron. Look how beautiful they are. Then there would be beautiful shadows on the wall; the lampshade prevents the light from scattering.

It might look something like this:

Master class: icosahedron pendant lamp made of copper pipes was last modified: March 4th, 2017 by Elena Lakeeva

If you are thinking about radically changing the look of your room or want to add home interior loft chandelier, then try making a loft-style chandelier from pipes with your own hands! Master classes with photos will help you with this.

By the way, the loft settled into interiors relatively recently - about 60 years ago, and to this day it is interesting for its variety of design concepts. It is appropriate both in large studios, where the living room is combined with a dining room, and in small rooms. DIY loft-style lamps are a compromise between fashion and style, extravagance and everyday life.

Familiar objects appear before us in a new light - this is a DIY loft lamp. Features include long chains for hanging from the ceiling, non-standard lampshades or compositions from a variety of simple lamps and use.

Making a loft-style lamp from pipes is quite simple, read master class 4 - see for yourself!

Materials and tools

• 5 large pear-shaped light bulbs;
• 10 brass (copper) tubes - 5 short and 5 long;
• fitting according to the diameter of the tubes;
• 1 longest brass tube – suspension axis (to the ceiling);
• 5 adjustable brass hinges;
• 5 ceramic light bulb sockets;
• two-core connecting wire (so that it passes freely into the copper tubes);
• electrical cable;
• insulating tape;
• screwdriver.

Chandelier manufacturing technology

Step 1

1. Let's do the wiring. To do this, unscrew the cartridge covers and connect the wires to each of them, as shown in the photo.
2. Threading wires through tubes, then using hinges we connect the short tubes to the long ones.
3. Cut off the wire leaving a few centimeters for twisting with the main cable that will be connected to the electrical network on the ceiling.
4. Screw the edge of the tube into the cartridge.

Step 2.

• Screwing in the “legs” future chandelier into the fitting and do the wiring again: we twist the white wires with the white core, and the black wires with the black wire, as shown in the photo. We wrap live parts with electrical tape.
• Carefully fill cable inside main brass tube , on which the chandelier will be held. We fix it on the ceiling. After everything, we screw in the light bulbs.

The result is an urban chandelier that, with the light of large lamps, combines the simplicity and elegance of an industrial or elevator style.

Master class No. 2: Loft chandelier made of pipes

Following modern trends lighting, you need to take into account the efficiency of not only energy-saving lamps, but also the chandeliers themselves. For example, from scrap materials - try to make a simple, bright, ergonomic lamp in the loft style made of polymer water pipes, after reading the following master class.

Materials and tools

1. Ceiling rose;
2. 12 splitters (lamp sockets);
3. polymer pipes
4. 12 small light bulbs;
5. a can of gold paint (or any other);
6. paper or newspapers.

Build process

Step 1.

• First, let's develop a model of the chandelier and connect all the splitters to each other.
• Only your imagination works here, but you can make a symmetrical chandelier, creating tree structure, i.e. screw in the same number of cartridges (branches) on each side.

Step 2.

• Spread paper or newspapers to paint the future chandelier.
• We paint with a spray can on all sides. Leave to dry.

If necessary, after drying you can paint over it with a second layer. We paint the ceiling rosette from the front side.

Step 3.

After everything has dried, you can attach the chandelier to the ceiling. If her appearance suits you, then screw in the light bulbs and enjoy your creation!

Over time, you may want to change it - then you can make a different combination of branches and the chandelier will shine in a new way!

Master class No. 3: Loft table lamp made of pipes

Durable, easy-to-make, industrial-style desk arm suitable for office or home use. It practically “sheds” cold or warm white light through the pipeline, in which it is pleasant to work or engage in your hobby.

Tools and materials

1. One long nipple;
2. one short nipple;
3. 6 pipe squares;
4. 6 short nipples for connecting elbows;
5. 3 plumbing tees;
6. electric drill;
7. cord with socket and switch;
8. glue gun (hot glue);
9. insulating tape.

Manufacturing instructions

Step 1.

1. First you need to clean all the pipes with white spirit or a special cleaner, if there are stickers, you need to remove them.
2. During work, the cord with the switch will have to be drag through pipes, so for now we’ll cut out the switch - it will be put in place later.

Step 2.

• We insert the lamp into the socket and pull the cord through the square.
• To keep the lamp socket in place, secure it with a glue gun, filling the cavity in the square, as shown in the photo.
• You need to pour it carefully, not reaching the thread.
• Let the glue dry.

Step 4.

Let's prepare a hole for the cord on the other side. For this electric drill Let's drill a hole in one of the tees.

First, imagine how the lamp will stand on the table, only then mark the drilling point and drill the part.

Step 5.

• We assemble threaded pipes using nipples, as shown in the photo.
• It should look like this: 4 corners, like the base of a table lamp, 3 tees are twisted together, the factory hole is directed upward, and the one made, on the contrary, downwards, on the invisible side.
• Two nipples are connected to each other - this is the lamp holder. As assembly progresses, we pull the cable through the tubes.

Step 6.

We disassemble the switch that was cut out. We take out the old wires and use electrical tape to make a new twist, connecting the ends of the wires to the corresponding channels in the switch. Reassembling the switch.

Step 7

Check how the switch works and whether you are satisfied with the appearance and stability of the lamp. If something is wrong, then practical design this can be easily corrected by turning the parts.

A stable, comfortable and completely unexpected DIY designer lamp can safely be called an indispensable companion for your evenings!

You can also make a very stylish table lamp from copper pipes or empty bottles, a master class of these 2 lamps is in the material

Master class No. 4. Industrial style lamp

If you like products with industrial design, if you want to install in your home or garage industrial lamps– watch the next master class and, most likely, you will see what you have been looking for for a long time. Ease of manufacture and urban design.

Tools

• Lamp with grille;
• 2 black plumbing nipples;
• conductive cable;
• plumbing elbow and tee;
• 2 metal flanges along the diameter of the cartridge;
• screws and a screwdriver.

Installation instructions

Step 1.

1. Remove the grille from the lamp. If it suits your interior, you can leave it. Removing the cartridge.
2. To the cartridge attach a metal flange as shown in the photo.

Step 2.

We connect the parts of the chandelier sequentially: a flange, a tee to it, then a nipple, an angle, a nipple again, connected to the second flange, all the while pulling the wire through the tubes.

Step 4.

Check the length of the cord from the outlet to the height at which the chandelier will be installed. Until you are satisfied with the height of the switch, do not attach the lamp to the socket.

Vary the length of the cable until you find the optimal length. After this you can do the twisting.

Step 5.

We fix the flange to the wall using screws and a screwdriver, because... The design is not very heavy. It turns out that the wire hangs just from the tee hole.

Plug in and enjoy a small design element in style big city!

Chandeliers in the loft style focus attention with technical solutions, clarity of forms, without excessive solemnity or pomp. This is the style of a big city, spacious household premises, where there is no luxury, but there should be a lot of light and work, creativity.

What else can loft lamps be made from?

Do-it-yourself loft-style chandeliers made from pipes deny pomp and chic, but they fit well into home and other interiors thanks to the continuity of modern trends and, of course, the contribution of everyone who makes it.

Made of wood

Also, a very simple lamp in the loft style, as in the photo above, can be made from wood - a master class in the article.

Made of plastic

The theme of recycling is very relevant in the loft style. Various cans and bottles are suitable for this. Also we have ready-made ideas and master classes.

Made of glass and wood

Glass and wood are favorite and frequently used materials in the loft. Therefore, a lamp created from them will always look harmonious and stylish. Make such a cult thing as in the photo above - (No ratings yet)

Reading time: 6 minutes.

Various interior items made from the most unexpected things and even scrap metal are increasingly becoming decorations for residential premises.

Many craftsmen make lamps from water pipes, both plastic and metal, cast iron, turning simple plumbing products into designer items that are unusual in appearance.

Water pipe lamp

Self-assembly of lamps from pipes

It is very easy to assemble a lamp yourself from the remains of water pipes. This does not depend at all on the material of manufacture. Thinking through appearance and the purpose of this or that lighting fixture, the style of the room in which it will be located is taken into account. The properties of plastic to yield are taken into account heat treatment, metal-plastic pipes bend, and cast iron ones can be folded through adapters and connectors into the most bizarre shapes.

The main thing that attracts creators is the cavities into which an electrical wire can be easily passed. A variety of cartridges will allow you to choose the most suitable size and simply glue the material in the right place.

Lamp made from water pipes is excellent will suit the room in loft or country style. A pattern cut into a PVC pipe large diameter, illuminated from the inside, will decorate even the most sophisticated interior.

Floor lamp made of PVC pipes

Making lamps from plastic pipes with your own hands is a very simple process. The material is easy to cut. It can be bent after heating. At the same time, it is not expensive, does not allow electricity to pass through, and can serve as an additional insulator. But you should also remember that plastic is subject to melting and deformation, so lamps should be chosen that do not heat up.

If you use small-diameter pipes, connectors and tees, you can assemble a structure of any configuration simply by inventing suitable design and adding the components according to the type of constructor. For example, a tall floor product folded through tees with curved top lines looks very impressive. Such a lamp can have 4 legs or a wooden round base. Quantity installed lamps depends solely on the desire of the creator.

Can decorate an artsy living room floor lamp from a large diameter pipe in which patterns are cut out. Warming up its individual parts construction hairdryer, you can bend the material and make the drawing three-dimensional. By cutting off some areas, you can make them more transparent. If desired, paint the surface in any color. All that remains is to fix the light source inside, put everything on PVC or wooden base and connect the electricity.

The connection of individual elements is strengthened with an adhesive layer, having previously passed a cable of maximum length inside.

For the dacha

Manufacturing decorative items from old cast iron pipes very popular for use in the country. These can be stylish sconces with large shades or a loft-style chandelier, assembled in the form of fancy curving lines with several lamps at the ends.

Homemade lamps are also appropriate as street lighting, installed on wooden posts and the facade of the building. The main thing to remember is that any metal conducts electricity, so care should be taken to ensure reliable cable insulation.

For the playground

Homemade lamps made from pipes are perfect for children's playgrounds. They can be assembled into a fence by inserting lamps inside areas with a large diameter. This design will reliably protect the light source from mechanical damage, and hidden cables will completely eliminate the possibility of injury from exposure to electricity.

Having secured the pipe around the perimeter of individual entertainment areas, drilled holes in it throughout the entire area and inserted it inside LED strip, you can turn the most banal site into a fairy-tale world.

Wall lamp made of flexible metal-plastic

Metal-plastic pipes have one significant advantage over PVC products- they bend. A light source with such a housing can be turned in any direction without worrying that movement will lead to breakage.

For assembly you will need a piece of wood or thick plywood. A base is made from it, which is attached to the wall. In addition, you should prepare the pipe the right size, suitable cartridge, cable, electrical tape.

Installation instructions

First, you need to draw the design of the future product, which will show how to make the main components. For work you will need a drill, a jigsaw, a stationery knife and several self-tapping screws.

A piece of any shape is cut out of a piece of wood or thick plywood. A hole of the appropriate diameter is drilled in the place where the pipe is supposed to be attached.

For full operation, a pipe of 20-50 cm (more is possible) is suitable. It is inserted into the hole in the base. An electrical cable is then threaded through the pipe. The cartridge must be secured on the reverse moving side. If necessary, you can use additional plumbing fittings.

When the wall lamp made of flexible metal-plastic is completely assembled, it is screwed to the wall with dowels or self-tapping screws, the LED element is installed and put into operation.

LED night light made of plastic pipe

If cast iron products If they are more suitable for making loft-style lamps, then delicate white plastic is best used to create night lights that will fit into any interior. They are decorated with openwork patterns of any stylistic orientation, ranging from exquisite floristry to images of fairy-tale characters.

Manufacturing instructions

Making a plastic lampshade is very simple. To do this you will need a wooden or metal base with a built-in cartridge, a piece of PVC pipes with a diameter of at least 15 cm and a length of 20-30 cm, a drill with a set of drills, a stationery knife.

To begin with, the edges of the future lampshade are sanded and a design is applied. Then holes are drilled along the marked lines. different sizes. Oblong lines are cut with a knife. If you want to make the image more realistic, you can cut off some areas of the surface, making them thinner, to enlarge throughput. You can change the shape and bends of some areas by heating them with a hair dryer and bending them.

After the pattern is worked out, the lampshade is attached to the base and the light bulb is screwed in. Now the entire structure is assembled and can be connected to electricity. If desired, the lampshade can be painted.

Chandelier manufacturing technology

Many may think that when using pipes and plumbing components, a chandelier will look rustic and even clumsy, but this is not so. At the right approach and careful execution they create a work of art even from such simple materials.

Build process

For production you will need pieces of metal-plastic pipes, splitters, a ceiling socket, and cartridges.

To begin with, they think about the design of the future product and the number of lamps that will be installed. In the center of the entire structure there will be a splitter, to which the pipes are connected and bent into the desired shape. Wires are passed through the resulting workpiece. Since the cord will pass through several endpoints, it is recommended to run each separate branch parallel lines, connecting them only under the ceiling rosette, excluding breaks inside the chandelier.

Chucks are attached to each pipe at the ends, having previously connected them to the cable. Through a small piece, connect the socket to the splitter. Then the electricity is connected.

The finished product is painted and equipped with lampshades. The main thing is that the result pleases the inhabitants of the house.