What paint to paint a polyurethane baseboard. Features of painting ceiling plinths made of foam plastic. Polyurethane plinth - advantages and disadvantages
For a more harmonious combination with the main finish, sometimes they still have to be painted. Of course, the paint for the baseboards must be chosen correctly. There are certain dyeing technologies that must be followed.
We’ll talk about which dye is best to use, as well as how to properly decorate the baseboard in this article.
Which paint to choose
Change the original White color usually in foam plastic and. Also available MDF plinth for painting. Sometimes they are designed in a similar way. Of course, the paint should be chosen depending on what material the baseboard is made of.
On modern market there are simply a huge number of dyes different types, quite suitable for decorating skirting boards
Choosing a product for foam baseboards
For foam plastic and polystyrene foam ceiling moldings, you cannot use products based on acetone or white alcohol. These chemicals can dissolve the planks. So what is the best way to paint foam baseboards? For this type of decor, you should choose a product whose solvent is plain water. It can be water-based paint or water-dispersion paint.
Painting the ceiling plinth made of foam plastic can be done with water-based or water-dispersion paint
Advice: If you do not find an option in the store that ideally matches the color of the ceiling, you can paint the foam baguette with a white water-based emulsion to which color has been added.Which product is suitable for polyurethane and plastic baseboards?
Now let's see what to paint with. Almost any product is suitable for such decor. Typically, for plastics and polyurethane (which is essentially ordinary foam plastic), oil-based or water-based paint is used. If you need a glossy surface, choose the first option. In order to get matte polyurethane or, you should use the second one.
Oil paint can be used to decorate polyurethane and plastic baseboards
Paint for wooden baseboards and MDF planks
What to paint with? Almost any type of product is also suitable for it. It can be varnish or alkyd enamel. Used for wooden skirting boards and MDF slats are also oil and acrylic paint on water based without smell.
MDF floor plinth for painting
How to choose a shade
What color should I decorate the slats in? Usually the baseboard is decorated to match the tone of the main covering. Is it possible to paint the ceiling plinth the same color as the walls? More often it is decorated to match the color of the ceiling, however, this option is quite acceptable. In any case, it is better to choose an option that is slightly lighter than the main coating.
Usually the baseboard is painted to match the color of the ceiling
On a note: When choosing a means to change the color of the planks, repeating the shade of the walls, you can make the room visually taller. If the color is the same as flooring, the room will visually appear larger.Dyeing technology
We figured out what paint to paint the ceiling or floor plinth. Next, we will consider the actual features of the plank processing technology. First of all, you should decide when you will decorate the elements - before installing them in place or after.
How to paint ceiling plinth. Decoration can be done both before installing the planks in place and after
In the first case, painting can be done without the risk of staining the wallpaper. Most often it is recommended to use this method. However, painted ceiling or floor decor it may not look particularly neat in place. The fact is that in this case the joints treated with putty will become noticeable. So, if you wish, you can decorate the planks even after they are installed in place.
Important: If there are any defects on the floor or ceiling edging decor, they must be removed before decoration. Fill all scratches and wash off any dirty stains. Wooden and foam options should be pre-primed.
Before painting, the baseboard should at least be wiped down
How to paint a floor plinth
Wood or wood is most often used to finish the floor. plastic decor. If you decide to carry out the treatment before installing the planks in place, you can use a sprayer. On the wall, the plinth to be painted is passed with a brush (the width of which should be less than the width of the planks). Move it along, thoroughly rubbing the product and preventing drips from appearing. Usually two layers of paint are applied.
When processing planks, the paint should be rubbed as thoroughly as possible.
Decorating fillets on the ceiling
First, decide whether you need to paint the ceiling plinth. Most often, white foam baguette is used for the ceiling. This color goes very well with most other shades. If you still decide to change the color of the foam baseboard, also use a brush. Go over the surface with long, smooth strokes. Don't put too much product on your brush. Otherwise, you will definitely get drips. This type of decor is also covered in two layers. It is better to use a brush that is not too new. A freshly purchased baguette may leave hair on it.
Installing and painting ceiling skirting boards is often the final touch in the entire renovation of a room. But, however, some prefer to carry out these procedures even before finishing walls so as not to stain the wallpaper with paint. Regardless of what order of work you choose, the question of how to paint the ceiling plinth remains just as relevant.
Another disadvantage of unpainted fillets is that they can darken from dust or turn yellow when exposed to sun rays. In this case, it is almost impossible to clean the product, unlike painted skirting boards, which do not change their color and can be easily washed.
By the way, don't forget about the joints. The plinth cannot be glued in one piece, so the junctions of individual elements remain quite visible. In order to give integrity to the entire ceiling plinth, it is treated with putty and coated with paint.
Do I need to paint wooden ceiling plinths? Undoubtedly - yes. Coating such products with paint, varnish or impregnation will protect them from insects and make the fillets themselves more attractive. Well, the last argument in favor is the possibility of giving them the required shade. This allows you to harmoniously “make friends” between the walls and ceiling.
When is the best time to paint the baseboard?
Painting is easiest when the baseboard is still on the ground. In this case, there is no need to work with a stepladder and there is no possibility of accidental staining of already finished walls. If you decide to do this, you should first cut the fillets according to required sizes, adjusting them at the corners. After installing the baseboards themselves, you will have to start sealing and painting the joints, and this stage of work can cause paint to get on the walls. Therefore, you need to decide whether such an installation is necessary.
Experts recommend painting the baseboards after installation. Naturally, this approach is much more complicated, but the finishing itself will be more seamless and neat. If the ceiling and baseboards are the same color, then they can be painted at the same time, before wallpapering or any other finishing of the walls.
If the ceiling plinth needs to be primed before painting, then this procedure can be carried out before its installation and adjustment.
How to paint ceiling plinth
Preparing for coloring
Before the beginning painting works it is necessary to get rid of all possible installation defects. These can be not only fillet joints and corners, but also dents and scratches on the surface of the baseboard. To eliminate such deficiencies, you can use fine-grained finishing putty or white silicone sealant (more details: " "). To work with wooden baseboards, it is better to use a special wood putty.
Preparation for painting ceiling skirting boards consists of the following steps:
- It is necessary to prepare any of the materials mentioned above, a soft cloth with water or a sponge, as well as a rubber spatula. Instead of a spatula, a flexible plastic plate can be used.
- The putty is applied to a spatula, which is used to cover the joint. You need to move along the seam, from top to bottom. The spatula must be pressed firmly against the baseboard, but do not overdo it. Here it is necessary to repeat as much as possible all the bends of the profile.
- Excess putty is removed with a sponge.
- It is convenient to seal joints in the corners with putty applied to the tip of your finger. In this case, you should work with gloves.
- It is also necessary to seal all the cracks between the baseboard and the ceiling or wall.
- After the putty has completely dried, you can begin to smooth out the uneven surfaces with fine sandpaper.
Before the procedure of painting the baseboard on the floor, its surface is covered with paper or film. If the walls have already been subjected finishing, then they need to be protected. To do this, stick along the baseboard masking tape. You should not hope that water-based paint can be easily wiped off, since this is not so easy to do on wallpaper (especially with a relief texture).
We hope that this material helped you understand the question of how to paint ceiling skirting boards. If some aspects of how to paint a ceiling plinth are still unclear, the video instructions will help you.
Installing and painting the ceiling plinth often becomes the final touch in the renovation, when the walls, floors and ceilings are already decorated new finish. But some people prefer to do this work before finishing the walls so as not to stain the wallpaper. Regardless of the order of work, the question ishow to paint ceiling plinthand is it worth doing it at all?, remains open.
Why paint the baseboard and when to do it
Arguments in favor of coloring
Ceiling fillets made of polystyrene foam, polystyrene or polyurethane, which are commercially available, are most often white. If the ceiling in the house is also white, people often think: is it necessary to paint the ceiling plinth at all?
We answer: it is necessary! And we'll explain why.
- Skirting boards made from the listed materials often have small dents and scratches that will be visible in bright light.
- These same materials have a rather loose structure, are slightly translucent, and paint will give them strength and more solid look.
- Over time, the unpainted material from which the ceiling plinth is made may turn yellow or simply darken from dust. It will be difficult to clean, while painted fillets can be easily washed with a damp cloth.
- The most important: It is impossible to glue the baseboard without joints, and they are very noticeable, especially in the corners. Therefore, before painting the baseboard, the joints are sealed, and a layer of paint completely hides them underneath.
- Wooden skirting boards also need painting, varnishing or impregnation. This will make them more beautiful and protect them from pests.
- Finally, in any case, the baseboard will have to be painted if you want to give it a certain shade, to “make friends” with the color of the walls or ceiling.
When is the best time to paint the baseboard?
But after installing the skirting boards, you will still have to seal and paint over the joints, and it is not a fact that this will be done accurately. Therefore, decide for yourself whether you need to paint the baseboards before installing them.
In our opinion, this should be done locally. It may be more difficult, but the result will be more complete and accurate. And if the color of the plinth and ceiling matches, then the most best option– their simultaneous painting before gluing wallpaper or other finishing of the walls.
Advice. If the ceiling plinth needs to be primed before painting, then this procedure can be carried out just before it is installed in place, even without adjusting the fillets to size.
How and with what to paint the baseboard
Selection and preparation of paint
It is very important to understand what paint to paint the ceiling plinth. Products made of polystyrene foam and polyurethane literally dissolve under the influence of white spirit and other solvents, so for them you should choose only water-based paints - water-dispersion, acrylic, latex.
If you still decide to paint first and then install the fillets, then paint for the baseboard can be in a can - the work will be done very quickly and accurately, without streaks or drips.
Advice. If you need paint of a certain shade, but could not find it on sale, then buy white and tint it yourself or use this service at any large hardware store.
Preparing for coloring
Before painting the ceiling skirting boards, it is necessary to eliminate all installation defects. These can be not only the joints of adjacent fillets and corners, but also scratches and dents on the baseboard itself.
To do this, you can use any fine-grained finishing putty or white silicone sealant. For wooden baseboards it is better to use wood putty.
Preparation for painting skirting boards consists of the following steps:
- Prepare any of the above materials, a sponge or soft cloth with water and a small rubber spatula. Instead, you can use any flexible plastic plate.
- Apply putty on a spatula and cover the joint moving along the seam - from top to bottom. Press the spatula firmly against the baseboard, but not too hard, trying to follow all the curves of the profile.
- Excess putty delete with a damp sponge.
- It is more convenient to seal joints in corners by applying putty or sealant to the tip of your finger. In this case, you need to work with gloves.
- If there are gaps between the baseboard and the wall or ceiling, they also need to be sealed.
- Wait Allow the putty to dry completely and smooth out any uneven surfaces using the finest sandpaper.
If the paint is for ceiling plinths you are ready, you can start painting the ceiling skirting boards.
Painting methods
Painting ceiling plinths is the simplest thing and does not require special skills. But the technology itself depends on at what stage of finishing you decided to do this work.
Important! Before starting work, the plinth must be thoroughly cleaned of dust, or even better, primed.
Please pay attention to the following nuances:
- If you are painting a plinth that has not yet been mounted or has been installed on a wall that has not been pasted over, you can use both spray paint and a soft brush. Before painting the baseboard on the floor, cover it with film or paper so as not to stain it.
- If the floor and walls are already finished, they need to be protected from paint. To do this, stick masking tape along the baseboard, being careful not to leave open areas. Although fresh water-based paint can be easily wiped off with a damp cloth, the wallpaper may be damaged.
- If you are afraid of ruining the wallpaper with tape (if it is peeled off, they may also move away from the wall or lose their decorative coating), then there is another way to properly paint the baseboard. Take a wide clean spatula or a sheet of thin plastic or cardboard and apply it to the wall while painting the corresponding area.
- After applying the first coat of paint, you need to let it dry. If the joints are not visible through the layer of paint, and you are satisfied with the result, then painting the ceiling plinth can be considered complete. If this is not the case, then the procedure must be repeated again.
All photos from the article
Polyurethane skirting boards today are considered by most experts as one of the most suitable materials for decoration of ceilings and walls. A wide range of polymer fillets, their good performance, as well as a number of other advantages explain the demand for such products in this market niche.
In our article we will look at what these advantages are, and then we will describe the installation of polyurethane skirting boards, paying attention to key features technologies.
Product overview
Main varieties
Skirting boards made of polyurethane foam are elongated panels that are made from polymer raw materials. As a rule, such parts are installed at the joints of surfaces, therefore their design provides for the presence of two perpendicular planes used for fixation on the base.
The front part of the plinth can be very different.
Depending on its configuration, the following varieties are distinguished:
- smooth - the simplest, used simply to mask the corner. Smooth skirting boards are characterized by a minimal price, but their decorative potential is low;
Note!
On the other hand, the smoother the front part, the less prone it is to dust accumulation, and the easier it will be to care for the baseboard.
- shaped – have more complex configuration. It is shaped models that occupy the main market share, since they combine attractive appearance, and simplicity of form;
- relief - act as an independent decorative element. Most often, the relief imitates plaster stucco, that's why it's so foamy polyurethane baseboard will not be appropriate in any interior.
Depending on the purpose of the products, an alternative classification can be given:
| Product Application | Peculiarities |
| Ceiling decorative | Skirting boards (otherwise called fillets) are mounted at the junction of the wall and ceiling and experience virtually no operational loads. They are made from lightweight polyurethane foam with low density, so they can be mounted even on weak foundations. Flexible models that allow the design of curved surfaces without joints deserve special mention. For the production of such products, polyurethane with increased elasticity is used. |
| Ceiling for lighting | They differ from the previous ones primarily in their configuration: such products have either holes for installing built-in lamps or gutters for laying LED strips. As a rule, the fillet is attached only at the bottom, so the parts are usually equipped with a massive base. |
| Wall mounted | They are used as decorative edging, and are also sometimes used instead of platbands. They have a fairly simple configuration, since they have only one mounting plane. |
| Floor-standing | Polyurethane skirting boards, made from raw materials with increased density (and therefore strength), can also be installed in the lower part of the room. In this case, the part is attached to the wall close to the floor covering. |
| Borders for table tops | Sometimes plinths are also installed on countertops to mask the gap between its edge and the adjacent wall. For this purpose, small corner moldings made of dense polyurethane, resistant to external influences, are usually used. |
Painting the ceiling plinth is by no means the final chord in the renovation, as is commonly believed. It is recommended to do this work before finishing the walls, so as not to stain the wallpaper. However, despite the order of work, the question of the need to paint the molding is rhetorical. Painting ceiling skirting boards is a necessary measure aimed at preventing translucency, darkening and yellowing of their surface, as well as obtaining a certain shade of the fillet. Therefore, let's find out what paint to paint the ceiling plinth and how to do it correctly.
The need to paint the ceiling plinth
Ceiling fillets made of polystyrene, foam plastic or polyurethane, which are most often used to hide the junction of walls and ceilings, are white. If the ceiling in the room is also white, people often wonder if the ceiling plinth should be painted. Let's see why it is recommended to paint the ceiling molding:
- Baguettes made from the listed materials often have small dents and scratches, which will be noticeable in bright light.
- These materials have a rather loose structure, are slightly translucent, and paint can give them a more solid appearance and durability.
- Over time, the unpainted material from which the ceiling plinth is made may darken with dust or turn yellow. Therefore, the question arises: is it necessary to paint the ceiling plinth, and how to apply it correctly? coloring composition. It will be difficult to clean, but painted moldings can be easily washed with a damp cloth.
- It is difficult to glue the baseboard without joints, and these gaps are very noticeable, especially in the corners. Therefore, before painting the ceiling plinth, it is customary to seal the joints, and a layer of paint hides the cracks underneath.
- Wooden skirting boards also require painting, varnishing or impregnation. This will make them more beautiful and prevent pests from attacking them.
- And finally, the baguette will have to be painted if you want it to get a certain shade and acquire the tone of the ceiling or walls.
Now let's find out whether it is possible to paint the ceiling plinth if it is already fixed in place. Of course, it is easier or more convenient to paint when the molding has not yet been installed in place - you will not need to jump with a stepladder and be afraid for the already finished surfaces. However, in this case, you will still have to seal the formed joints. Therefore, it is customary to first install the ceiling plinth and then paint it. This way the result will be more complete.
Choosing paint for the ceiling molding
It is very important to do right choice what paint to paint the ceiling plinth. Products made of polyurethane and polystyrene literally dissolve before our eyes from white spirit and other solvents, so it is recommended to choose only water-based paints for them - acrylic, water-dispersion, latex. Wooden baguettes not so demanding on coloring compounds.
If you still paint the plinth first and then attach it, you can buy paint for the ceiling plinth in a spray can, so you can do the job very quickly, without drips and streaks. If you need paint for a ceiling molding of a certain shade, but could not find it on sale, then you can purchase white paint for the ceiling plinth and paint it yourself or use this service at any hardware store.
If more serious requirements are put forward to the interior, and great importance has the final color and texture of the molding; it is better to use glazes for painting. Glaze is a type of tinting substance, like a stain, that is used for painting products made of natural wood. The glaze is sprayed onto the surface that is intended for painting from a spray bottle or can, and rubbed with a cloth, sponge or brush.
The use of glazes allows you to give the surface of the molding almost any necessary texture - wood, natural stone, gold or worn metal:
- Patina effect. To recreate the patina effect on ceiling plinths, it is customary to use Taire color glaze. Apply it evenly to the surface of the baguette, leaving the middle part unpainted. Then, using a rag or sponge, blend the joints between the unpainted and painted parts and remove upper layer substances. This technique will help make convex surfaces lighter and brighter, and deep areas richer and more contrasting. Next, using a dark Umber glaze, you should highlight the relief layer and enhance the effect of painting with a brush.
- Gilding effect. Before decorating the ceiling with a gilded plinth, you need to take a thin brush and a silver, gold or metal glaze. The brush should be dipped into the paint solution, and then wiped until almost dry, as shown in the video about painting ceiling skirting boards. Then attach the bristly part to the embossed surface of the baguette and slowly move along it in such a way that the “gold” remains exclusively on the convex parts.
- Malachite effect. Before applying paint to the ceiling plinth, prepare a green glaze and a leather or leatherette swab. Glaze should be applied to the surface of the baseboard and using a swab to create veins on it. After this, you need to paint with a pen with a light glaze that is slightly diluted with water.
- The effect of aged wood. A similar effect on the molding is achieved by applying brown glaze to it using a brush with stiff bristles. Thanks to this, you can create a texture that looks very similar to wood. With a thin brush with a dark coloring compound, you can add stripes of wood defects and fibers that are characteristic of solid wood. This allows you to make the wood texture more realistic in appearance.
- Dirty stone effect. This effect will be especially pronounced on ceiling cornices with an expressive and large relief pattern. To begin, apply the Taira glaze evenly. After this, you need to shade the paint with a brush to get light strokes. At the next stage you should apply dark spots with Umber glaze, after which the surface of the cornice is shaded. Next, small strokes are made using a dark glaze, regularly removing excess material. After the strokes have dried, apply strokes of bronze glaze, which is usually applied to the relief contours of the plinth.
Preparing to paint the ceiling plinth
After you have chosen the coloring composition to apply to the baguette, you should prepare the ceiling plinth for painting and eliminate all defects on the ceiling surface. Prepare in advance a bowl of water, a soft cloth or sponge so that you can wash your hands from drying glue or soak the already applied composition, as well as a small rubber spatula. Instead, you can use a flexible plastic or cardboard plate that does not damage the surface of the baseboard. You should work with gloves.
When you attach the last cornice strip, go over it with any fine-grained finishing putty or white silicone sealant to smooth out all the defects and irregularities that appeared after installation of the molding. For wooden baguettes it is better to use wood putty. Apply putty to the putty knife and cover the joint along the seam from top to bottom so that the difference in levels is not noticeable.
Press the tool against the baguette tightly, but not tightly, trying to follow all the bends of the profile. Use a damp sponge to remove excess putty. It is more convenient to seal joints in corners by applying sealant or putty to the tip of your finger. It is recommended to work with gloves. If there are gaps between the baseboard and the ceiling or wall, they should also be sealed. Wait for the substance to dry completely and smooth out any uneven surfaces with the finest sandpaper.
Technology for painting ceiling plinths
If you have already prepared paint for the molding, you should figure out how to paint the ceiling plinth yourself. Painting ceiling skirting boards is a simple task that does not require special skills. But the technology for painting the ceiling plinth itself depends on at what stage of finishing you decided to do this work. Before starting work, thoroughly clean the baseboard from dust and prime it.
Before painting the ceiling plinth, cover the floor with paper or film to prevent the surface from getting dirty. If the walls are already finished, they also need to be protected from paint. No matter what you can easily wipe off fresh water-based paint with a damp cloth, the wallpaper may still be damaged.
To do this, apply masking tape along the baseboard, being careful not to leave any exposed areas. The tape should be glued close to the fillet, which will prevent the surface from getting dirty when painting the ceiling plinth. You can remove the masking tape after the paint applied to the ceiling cornice has dried.
If you are afraid of ruining the wallpaper with tape (the finish may also come off the wall or be lost when it is peeled off) decorative spraying), then you should use another technique on how to properly paint the ceiling plinth. Take a clean wide spatula or a sheet of thin cardboard or plastic and apply it to the wall while painting the appropriate area.
In this case, the spatula should be applied close to the baguette from the wall side and the lower half of the protected area should be painted, then the spatula should be rearranged and the next area should be painted, and so on until the end ceiling cornice. Once you've painted the bottom of the baseboard, you can move the putty knife, pressing it flush against the top, and paint the top half in the same way.
To paint the ceiling plinth, it is best to use a brush, since it will be difficult to paint a carved ceiling plinth with a complex texture with a roller. Complex textures are easiest to paint using a spray gun. In this case, the paint will apply more evenly and smoothly, in contrast to the application procedure with a brush. But in any case, it is recommended to apply the paint in a thin layer and smear it thoroughly, otherwise the composition will collect in drops, flowing down onto the wallpaper after you remove the spatula.
After you have applied the first coat of paint, let it dry. If the joints are not visible through the paint, and you are satisfied with the result, then you can consider painting the ceiling plinth finished. If the effect is not to your liking, then repeat the procedure again. If you plan to paint an uninstalled baguette on an unpasted wall, then you can use both spray paint and a soft brush. But exterior paints should be avoided.
Knowing how to paint a ceiling plinth, you can do this work yourself without spending financial resources and money on hiring labor. Once again it is worth paying attention to the most important points, which we described in the article, and you can safely get down to business. For example, to achieve a certain effect, be it aged wood or patina, it is worth using a special glaze instead of paint, and often more than one. Also pay special attention to preparing the baseboard for painting and protecting the trim and furniture from getting dirty.
