Metal nibblers with cricket attachment. Review of drill attachments for dacha work. Special attachment “Cricket” for a drill for cutting metal
For repair and construction work It is necessary to periodically cut the metal. It is not always possible or advisable to purchase special expensive equipment. In such cases, a drill attachment for cutting metal can help out.
Special equipment for metal cutting
In production and construction, you need to regularly cut metal sheets, cut holes in them, and cutouts of various shapes.
Many types of tools and equipment can cope with such tasks:
- . She's Bulgarian. Using special trimming wheels, possibly cut sheet metal, fittings. It is often used precisely for these purposes. But there are disadvantages. Long cuts leave burrs, not suitable for corrugated sheets as they damage polymer coating, requires the constant purchase of trimming discs, which quickly wear out.
- Guillotine. Performs cutting of rolled metal with a fairly wide range of thicknesses. It has high performance. They are mainly used only in enterprises due to the high cost of equipment.
- A circular saw. It is possible to cut metal under different angles and with high accuracy. It is not possible to make complex cuts; after working with it, a lot of waste remains.
- Jigsaw. Allows you to cut material at different angles. Suitable for cutting sheet metal.
- Electric shears for metal. There are different types. For sheet steel - intended only for simple cutting of metal. Nibblers– in addition to straight and shaped cutting, makes a variety of holes. Slotted scissors - do an excellent job of cutting shapes and perform their task most accurately and accurately. The disadvantage of such tools is their rather high cost. Suitable for those who are professionally involved in construction and renovation. For one-time work and small volumes, purchasing electric scissors is impractical.
- Drill attachments for cutting metal. There are two types - “cricket” and “steel beaver”. The operating principle is similar to electric cutting shears, but several times cheaper in cost.
Drill attachment “steel beaver”
There are undeniable advantages of using a drill for cutting rolled metal. Every craftsman has this tool - both a professional builder and a summer resident.
Drill – universal equipment thanks to the ability to change attachments. They can be for drilling holes, grinding, milling, sharpening, etc.
Design of drill attachments
Structurally, the “cricket” attachment is a punch with a matrix. The drill, by its rotation, imparts reciprocating movements to the punch. And two cutting heads carefully cut metal sheets, punching them precisely.
In the treated surface, cuts a little more than three millimeters wide are obtained. Thanks to such small cuts, the edges of the material remain as smooth as possible, without burrs. Since the nozzle does not heat up during operation, the protective and polymer coating of the cut parts is not damaged.
"Cricket" is great for working with sheet metal, polycarbonate or other similar materials. roofing materials, including metal tiles. With this attachment it is possible not only to smoothly process the edge, but also to make holes (for example, for a chimney), and make artistic cutouts. Based on the principle of operation, these are cutting shears.
The attachment can be used to cut sheet material with the following thickness parameters:
- polycarbonate (plastic) up to 2 mm;
- stainless steel up to 0.8 mm;
- aluminum up to 2 mm;
- zinc, iron, brass, galvanized steel up to 1.5 mm.
The attachment for cutting metal is screwed to a drill or screwdriver and clamped with the same nuts as the bits. The tool can be held at any angle, which makes working with it much easier. It also makes it possible to perform actions in any plane, which is indispensable for roof installation.
Metal cutting attachment
The nuances of using “cricket”
The choice of “cricket” is determined by a lot of advantages:
- A neat cut. Unlike a grinder, the drill attachment will not leave burrs on metal surface and will not damage the polymer coating of the material with sparks.
- Lightness of the tool. There is no need to put in a lot of force.
- Compatible with drill and screwdriver. There is no need to purchase extra tools.
- Price. Much cheaper than special equipment for cutting rolled metal, and also saves money on the purchase consumables type of trimming discs for an angle grinder.
- Easy to use. It is easy to install on the cartridge and also easy to remove.
- Performance. Using a “cricket” you can cut material quite quickly.
- Convenience. Thanks to its shape, it allows you to hold the tool at any angle.
- Ability to cut holes and sections of any shape.
- Versatility. Suitable not only for flat sheets metal, but also for profiled ones.
And yet, certain nuances of working with the nozzle exist. The tool must be held with both hands. That is, the material being cut must either be securely fastened, or the master must work with an assistant.
Like any instrument it requires skill. If you are using it for the first time, it is better to practice first. For efficient work attachment, the rotation speed of the drill should be 1500–3000 rpm. But when buying a “cricket”, you still need to clarify its characteristics and requirements - for some, the minimum rotation speed of the cartridge is 2700 rpm.
« steel beaver" is similar in design and operating principle to a cricket. It also does a good job cutting sheet metal. Curvilinear cuts are made with a minimum radius of up to 12 mm. The difference is that the metal can be thicker - stainless steel up to 1.2 mm.
You also need to take into account that when working with these nozzles, a lot of metal shavings are formed.
Safety precautions
Regardless of the brand of drill and attachment, their price and characteristics, it is very important to follow safety precautions.
This will prevent injury and damage to the material.
- When working with a drill, you need to wear safety glasses and gloves.
- Before starting work, it is important to check the attachment of the nozzle.
- Be sure to check whether the material to be cut is well secured.
- The drill must be held with both hands using special holders.
- When working with a metal cutting attachment, constantly remove falling chips. For example, when installing a roof, a large amount of chips can damage the surface of the metal tile.
- After completing the work, do not touch the treated metal with your hands for some time and remove the attachments, as they may heat up due to friction.
So, when we cut metal sheets up to 2 mm thick, for example, when installing metal tiles or a fence made of corrugated sheets, and the amount of work is small or one-time, then it makes sense to turn your attention to drill attachments.
Video: Scissor attachment for cutting “Cricket”
Thanks to large selection different drill attachments, this universal device can replace many other tools. For example, grinding discs eliminate the need to purchase grinding machine, and the attachment for tightening screws and self-tapping screws will replace the screwdriver.
Using such snap-ins, you can perform the following actions:
- grinding;
- polishing;
- cutting;
- mixing;
- twisting;
- drilling holes of different diameters;
- milling.
At correct use the result will be of the same quality as if the work was performed using a special single-purpose tool. you can’t do without a drill with different attachments for a pigsty, cages for rabbits and others outbuildings in the country.
Types of nozzles
All drill attachments are divided according to purpose:
- stops;
- for drilling holes, crowns;
- cutting, scissor attachments “Steel Beaver” and “Cricket”;
- for drilling at an angle;
- polishing and grinding;
- cutters for wood and metal;
- feather removal;
- sharpening.
The parallel stop is used to adjust the drill depth; there are also special drill stands bottom reliable fastening tool. In addition to the standard drilling function, the drill can be used to make blind holes, for example, for installing hinges in wooden furniture. In this case, a Forstner drill is used. The base of the hole is flat and its edges are absolutely smooth. Or use feather drills instead. 
Cutting attachments
Unlike an angle grinder, drill attachments for cutting metals work more delicately and do not deform the coating of the material being processed. The equipment is activated using the tool chuck on which it is installed.
For cutting metals, you should choose drill models with a speed of at least 2800 rpm.
Advantages of cutting attachments:
- smooth cut;
- comfortable work;
- easy to use and maintain, no adjustment required.
The “Cricket” drill attachment is a nibbler with two cutting heads. They are used for cutting thin sheet metal: profiled metal sheets, metal tiles, profiled or sheet plastic, as well as polycarbonate. “Cricket” is simply irreplaceable when erecting on a site. 
“Cricket” is used for sheets of materials with the following parameters:
- the thickness of the sheet steel should not be more than 1.5 mm;
- stainless steel up to 1.2 mm;
- aluminum, copper and plastic no more than 2 mm.
The cut after processing this nozzle always remains smooth, without jagged edges, and the coating is intact.
To make a high-quality and even internal cut, you must first drill a hole.
The nozzle matrix rotates, thanks to which you can work with both horizontal and vertical surfaces. The recommended number of tool revolutions for using this equipment is 3000 rpm, minimum 1500 rpm.
Also for cutting profiled sheet metal and tiles, the “Steel Beaver” scissor attachment is used. 
The principle of operation is similar to the previous nozzle; the cut occurs due to the frequent reciprocating movements of the punch, which bends the material and breaks it against the matrix. This equipment can be used to make curved and straight cuts. The minimum cutting radius is 1.2 cm. You can work with it at any angle (360°). Compared to the Cricket, the equipment is capable of cutting steel sheet greater thickness - 1.8 mm. The main advantage of the nozzle is an even cut, and due to the absence of sparks, it does not deform during operation. protective covering material.
After finishing work, handle with care sheet material, since the cut edge becomes sharp after processing.
Sanding and polishing attachments
Using drill attachments for grinding and polishing, you can the following types works:
- metal polishing, wooden coverings, as well as glass surfaces;
- grinding of metal, parts made of it and other materials;
- removal of corrosion, scale, nicks and old coatings;
- polishing the edge of the glass.
Compared to special tools These devices are inexpensive and can cope with big amount different tasks, I make any surface perfectly flat and smooth. In addition, they can be processed hard to reach places, where it is impossible to use other tools. But because of not large sizes It is difficult for them to complete a large amount of work.
When purchasing a drill attachment for processing wood or other material, you should carefully study the instructions. Since for different types rigging required different power and the number of tool revolutions.
All polishing and sanding attachments consist of a rod on which abrasive material, such as foam rubber, felt, brushes or sandpaper, is attached.
The following types are produced:
- plate;
- disk;
- fan;
- drums;
- end;
- cup-shaped
Polishing devices are divided not only by type of design, but also by degree of rigidity: hard, soft, super-soft, embossed.
Cup
A cup attachment for a drill for sanding wood or other coatings consists of a rod for fastening in a chuck, and a cup-shaped body filled with hard or light bristles. Most often it is used to remove corrosion or old coating. Models with a soft polishing part are also available: foam rubber, felt or other similar material. The body is made of durable and lightweight plastic or metal. Soft drill attachments are most often used for car polishing. 
Disc and plate
Disc devices, like cup devices, consist of a rod, a body and a grinding material. The main difference from the previous model is the direction of the bristles (steel wire, brass brush), it is directed from the center to the edges of the disc. They must be used carefully, as they can quickly damage the coating.
Drill disc attachments for polishing or grinding are made on the same principle as for grinding devices. But instead of threads, they are equipped with a movable or fixed rod for fastening in the chuck. Sandpaper is attached to them using Velcro.
Experts recommend purchasing plate attachments with a movable rod, rubber or with a soft and thick layer between the Velcro and the base. Because then you can adjust the angle of the drill and smoothly follow the contours of the material.
When working with a rigid plate, it is more difficult to control, and even with a slight tilt it will create a noticeable depression in the surface. As a result, you can completely ruin the material. Therefore, it is recommended to use them only with the tool firmly secured to the stand.
Fan (petal), drum and end
Grinding fan attachments for drills are small disk in the center, to the edges of which petals of sandpaper or other abrasive material are attached. This device is convenient for treating hard-to-reach places, internal cavities or grind holes, as it can take any shape. They are fixed in the drill chuck in the same way as previous models, using a rod.
The drums are made in the form of a cylinder with a rod, covered on the outside with sandpaper. Unlike the disc attachment on a drill, the machining surface is located parallel to the chuck, and not perpendicular. They process wood, metal, and glass. Most often used for sharpening the end of glass. They are soft and hard depending on the purpose.
The end ones are a rod at the end of which the processing material is fixed in the form of a circle or cone. The attachments work on the principle of a file. Using them, you can increase the diameter of the hole, as well as remove nicks and make the edges smooth.
Other attachments
The angle attachment on the drill allows you to make holes in places where it is impossible to work in normal mode. The angle can be adjusted or remain unchanged - 90°. Core bits are used for drilling in wood, concrete, ceramic and tiles, metal and other materials with large holes. They are made of high-quality steel so that the holes are smooth, without chips or cracks.
The attachment for sharpening drills is a body with a leash and whetstone inside. Holes for sharpening have different diameters. Their number can reach 15 pieces. Mixer attachments are used for mixing various solutions, paints and other mixtures. Selected depending on consistency. There is also a special attachment for tightening self-tapping screws or self-tapping screws, but it should be purchased for drills equipped with a speed reduction function.
For poultry owners, a feather removal attachment has been developed for a drill for plucking poultry. It instantly and safely removes all feathers from the carcass. In this case, the skin and meat are not damaged. Before work, there is no need to first scald the carcass or treat it after plucking with a blowtorch.
The drill attachment for plucking poultry is easy to use; you just need to securely secure the tool and bring the bird to it. Made from easy-to-clean materials and takes up very little space.
For those who work with wood material, milling attachments of different types are produced. They allow you to make grooves various forms, process holes or remove defects. They are pointed and backed. 
Before working with any attachments, you should check the reliability of their fastening in the chuck and the material being processed. The drill must be held with both hands. During work, be sure to use protective equipment (gloves, goggles).
Homemade drill attachments - video
It all started with the fact that I was going to change slate roof on metal tiles and sheathing the house metal siding.
I went and bought everything I thought I needed. I am involved in construction, but I have never worked with roofs, or with painted galvanization. Zero experience. But hands grow from where they need to.
In general, the slate was removed and everything was prepared, you can attach the sheets of metal tiles. The roof is multi-pitched, a lot of trimming and fitting. As it seemed to me at that time, I would cut with an angle grinder, in common parlance a “grinder”, an ordinary cutting disc. And after the first attempt, doubt crept in, sparks flew in all directions, stuck to the coating and even burned it in places. Here it is no longer difficult to guess that in the place where the coating is damaged, corrosion will appear very quickly and the meaning of replacing the roof will be lost irrevocably. I tried ordinary metal scissors; it’s funny to remember how much time it would have taken me to do all the angles, bevel cuts and adjustments. Moreover, ordinary scissors are not at all designed for cutting metal tiles.
I started calling my friends. Friends explained to me that there are electric cutting and nibblers that cope with such tasks perfectly. In the store where I arrived, they showed me a lot various models, everything would be fine, but the price turned out to be very steep. The cheapest is 12,000 rubles. What's the point in buying them, what will I do with them then? They have no use in plumbing and heating installation (which is what I do). In short, I was upset and, out of hopelessness, was about to fork out money, when suddenly a man standing next to me and heard our dialogue with a friend, wrote on a piece of paper the address of the store and the name “attachment for drill, nibblers for metal “Cricket”
We arrived, twirled it, twirled it, listened to a brief oral instruction manual and bought it. The purchase cost 1250 rubles, that is, ten times cheaper!
In 3 days we covered 200 square meters of roofing and sheathed the house with metal siding. The attachment exceeded all my expectations. First, we put the attachment on the screwdriver, (1800 rpm) the cutting speed is slow and the quality is not great, there are burrs, uneven edges, we are already upset. Then we put it on an electric drill, (3000 rpm) heaven and earth, the edges are even and the speed is completely satisfactory. It is convenient to work with uneven and sharply convex surfaces, as well as adjust the degree of inclination. The cricket handle is independent of the drill and rotates 360 degrees. Cuts sheet metal up to 1.6 mm like paper. Any hole in the sheet, please, the entry hole is 12 mm and you're done! I tried cutting two 1.0 mm galvanized sheets at the same time, that is, 2.0 mm, it cuts very well. I also liked that the nozzle has two heads, on any of which you can screw the handle, and after it becomes dull, you don’t immediately change the matrix, but just turn it 90 degrees and change the cutting edge. This is done in three movements: loosen the screw with a special key, turn the matrix, tighten the screw. And in this small one in my opinion an indispensable tool in everyday life, everything is as simple as one, two, three!
Can't always find foliage finishing material required size and shapes. During repairs and installation of fencing made of profiled metal sheet, devices roofing covering you need to quickly cut this or that workpiece and adjust the standard element to the actual dimensions. For cutting, you can use an angle grinder, scissors, or other cutting tools. If you don’t have it at hand or you are limited on funds, then there is an alternative – a cricket attachment for a drill.
Short description
This is a removable mechanism that is installed on a standard chuck of an electric hand drill. It is designed for cutting flat and corrugated metal sheets:
- Composite aluminum sheet up to 2 millimeters thick
- Galvanized profiled sheet up to 0.8 mm thick
- Copper, brass up to 1.5 mm thick
By appearance The cricket drill attachment resembles a steel blank cylindrical, with “fingers” sticking out in both directions. A cylindrical blank is a body through which torque is transmitted from the drill to two cutting surfaces. “Fingers” are paired dies in direct contact with the metal workpiece. The tool comes with a plastic threaded handle-holder, which is screwed onto one of the paired cutting surfaces.
In addition, a spare die and punch, as well as a hex key, are supplied with the nozzle.
Principle of operation
The cricket attachment to the drill does not saw metal like an angle grinder, but cuts it due to frequent translational movements of the matrix. The working unit converts torque from the drill rotor. The tool cannot operate at low speeds. To obtain a high-quality cut, it must maintain a rotation speed of 2700-3000 rpm. If this parameter is not met, then the metal around the cut bends, and the quality of the finished product deteriorates.
Application area
The attachment is widely used for cutting thin sheet metal. Its design is specially designed to perform both straight and curved cuts. Having certain work skills, you can perform figured sawing along a complex trajectory.
Unlike corner grinder or metal scissors, the “cricket” is capable of cutting from the center of the workpiece without creating through cuts.
The cutting attachment is especially in demand for roofing works and installation of fences. It's all about the material. Mostly profiled sheets are used, which are perfectly cut using this tool.
Positive properties
The cricket drill attachment is widely used thanks to a number of positive properties. It outperforms some power tools in terms of performance.
- Mobility. She has small size, much less than that of the Bulgarian. The attachment is easy to install and remove from the drill, making work easier
- High level of autonomy. The “cricket” has two full-fledged cutting matrices. If one fails, you can use the other. In addition, the tool comes with a third spare
- Maintainability. There is no complex mechanisms, there is practically nothing to break. The cutting part is supplied as a ready-made unit, which is easy to install on site
- Speed of work. Numerous tests show that the performance and sawing speed of the attachment are significantly superior to those of an angle grinder. Metal shears cannot be compared at all
- Cutting quality. According to this indicator, the “dragonfly” has no competitors. Due to the translational movements of the matrix, the edge of the metal in the cutting area remains smooth. There are no burrs on it. The metal does not heat up, the protective polymer coating of the profiled sheet does not burn. Zinc protection is not destroyed. While in the process of sawing with a grinder, the edges of the sheet are charred, burrs remain on them
- No collateral damage. Working with an angle grinder involves the formation of sparks that fly over a considerable distance. If a galvanized profiled sheet is processed, sparks burn out the protective coating. During use, the metal will become covered with brown spots of rust. Sawing with the dragonfly attachment takes place in the complete absence of sparks. No rust problems
- Ergonomics. Handle holder makes working with the tool convenient and safe
Negative properties
There are not many of them, they do not have a critical impact on the choice of tool:
- Limitation associated with the type of grip. He only has two hands. Therefore, it is impossible to perform operations on inclined planes where to stay
- Metal thickness. The attachment is designed for cutting thin metal
Safe work rules
Practically do not differ from standard measures when working with sawing tools:
- Do not saw while holding the tool with one hand. This may cause it to bounce;
- Before starting work, check the rigidity of the handle holder. To do this, it is turned clockwise until it stops.
- It is allowed to work only in protective glasses and gloves;
- It is recommended to cut the sheet away from you, and not towards you;
- Do not work with a faulty tool. These include: a loose drill chuck, a ground sawing matrix, a loose handle holder
Manufacturers
Products from different brands are similar to each other. The main difference is in the thickness of the sheet that a specific model can cut. The price directly depends on this.
There are several companies worthy of attention on the Russian market:
- Anchor
- Corvette
- Sparky
Using scissor attachments on a drill greatly facilitates roofing work, installation of metal fencing, and other manipulations with sheet material. Convenient combination with hand drill allows you to reduce the cost of purchasing expensive specialized tools. The finished product is neat and of high quality.
There are a great variety of tools that can be useful in everyday life or for performing infrequent custom work. In order to buy, for example, a so-called “grinder”, you will need a considerable amount, and in the meantime the tool will lie somewhere idle in a garage or workshop, unclaimed.
Not every tool intended for a particular job can be purchased by a person: a lot of money and extra storage space will be required. And, as practice shows, there is simply no point in this. But there is still a way out of this situation.
Nozzles are available for the following work:
- Drill bits at an angle;
- Grinding;
- Polishing;
- Sharpening attachments;
- Drilling;
- For cutting metal.
As you can see from the above, having only one drill and a few attachments, you can thus replace a lot of expensive tools and not waste your money.
Basic methods of cutting sheet metal
Sooner or later, every homeowner, not to mention professionals, cuts sheet metal on one scale or another. Ever since labor lessons at school, and for many after, in production, The following tools for cutting metal are known:
But time passes, and technological progress does not stand still. Mankind has invented a simple and inexpensive cutting tool that works in tandem with an electric drill called “metal nibblers.” This equipment is simple, constructive and very easy to use.
When any man has one in his tool arsenal, as well as an electric drill, then there are no and cannot be any problems with cutting a metal sheet.
And if the farm does not have one, then it can be purchased at the nearest hardware or construction market.
Good alternative to grinder
This drill attachment has been helping craftsmen out for many years. Such a tool is called nibblers.
Easily punches a path about 3 mm thick in metal. This cutting method gives the desired cleanliness of the cut, and there is no particular need for further cleaning of the cut.
Thicknesses of materials that scissors can cut:
- Copper and brass - 1.5 mm;
- Aluminum - 2 mm;
- Stainless steel - 0.8 mm.
For metalworking
These attachments are simple and original design, where the rotational motion of the drill chuck is converted into reciprocating motion.
Nibblers “Cricket”
The technical capabilities of the Cricket attachment allow you to cut metal and plastics. Moreover, the material can be cut both sheet and profile. Two cutting heads of the cutting attachment on the drill allow you to cut materials of a certain thickness (the specified thickness is maximum):
- For aluminum - 2 mm;
- For steel - 1.5 mm;
- By of stainless steel— 1.2 mm;
- For plastic - 2 mm.
Additional characteristics:
- Electric drill power from 420 W;
- Speed - from 3000 rpm;
- Cutting radius (minimum) - 12 mm;
- The cutting direction is unlimited, hence 360 degrees.
Application area:
- Installation;
- Roofing works;
- Manufacturing of gutters;
- Dismantling of various structures;
- Bodywork;
- Figured (decorative) cutting.
When working with drill nibblers, no adjustments or special skills and knowledge are required.
The “Cricket” tool for cutting metal is very maneuverable, and its capabilities are as follows: cutting tool very wide.
As for cutting with a grinder, there are a number of disadvantages compared to perforated metal shears. The drill attachment has a number of significant advantages:
- The material does not overheat during cutting, which is especially valuable when cutting through metal tiles.
- Maneuverability nibblers for a drill is much higher than that of the well-known grinder.
- Higher cutting speed.
- A cleaner cut that rarely requires further machining.
- When working with drill nibblers, there is no jamming of the tool due to distortions, which very often happens when working with an angle grinder, hence the almost complete absence of injuries.
- Does not burn zinc and paintwork material, which allows you to prevent premature corrosion and, most importantly, maintain the warranty on the material.
- When working with the “Cricket” tool for cutting metal, there are no sparks, unlike an angle grinder, which not only protects the material from burning, but also eliminates the possibility of injury to the worker’s eyes.
The Cricket scissor attachment has a number of analogues, for example:
- "Beaver";
- "Steel Beaver";
- Scissor attachment NP 1.8 SPARKY;
- EDMA NIBBLEX;
- Malco turboShear TS1 - can be used with a drill and for installation on a screwdriver.
All of the attachments listed have some differences By technical specifications and prices. The most expensive attachment is the Malco turboShear TS1. It has a slightly different design and was made in the USA, not in China.
It should be noted that normal operation of these devices can only be ensured when the drill's rated speed exceeds 2700 rpm.
Screwdriver attachment
If you don’t have an electric drill, then a screwdriver can also perform the same functions.
However, there is still a difference:
- The speed of a screwdriver is lower than that of a drill. Low speeds and, accordingly, the power of the power tool will not allow cutting metal with the same productivity, especially if it is closer to 2 mm in thickness.
- No inertia. After the user releases the button, the chuck immediately stops rotating. In terms of safety, this is even somewhat better, just like in the case of performing a curved cut.
- Small size and light weight compared to a drill. This allows you to make all kinds of “pirouettes” when cutting more easily than with a drill.
- Screwdrivers operate on batteries, therefore, their operation is autonomous, and the power cord does not interfere with normal operation.
- There is no adjustment of the chuck rotation speed.
It is quite clear that a screwdriver can also be used instead of a drill with a “Cricket” type attachment.
For cutting metal tiles and more
This nozzle is a real find for cutting materials such as metal tiles.
Advantages:
- Does not damage the material and coating;
- Easily follows the contour of the material profile;
- Able to make cuts of varying complexity.
“Cricket” is a real find for both the artisan and the professional. It can make an internal cut and can work in both horizontal and vertical planes.
The attachment for cutting metal tiles allows you to cut metal tiles and corrugated sheets, which this tool does an excellent job of. After all, it is well known that it is difficult to work making cuts in these materials with another tool, but “Sverchok” copes with this task perfectly: cleanly, quickly and without errors.
Advantages and disadvantages
Advantages:
- The surface cleanliness is better than that of an angle grinder.
- This device can make holes (“windows”) of any complexity in metal.
- The tool is easy to operate and maintain, and takes up little storage space.
- Low price.
- You can cut both metal and plastic, as well as carbonate of a certain thickness, stated in the instructions for use of this equipment.
- The possibility of using the device in places where there is no power supply is compensated by the presence of a cordless drill. In addition, it can be successfully used in damp areas, where using an electric drill from the mains is dangerous to life.
- The device is multifunctional.
- The low weight of the device is also an undeniable advantage.
Among the shortcomings, there is only one and main one: the device must be held with both hands, which is not always convenient and safe when working at height.
In conclusion, I would like to summarize what has been said. Any user, both beginner and experienced, who does not want to overpay for a fabulously expensive instrument, can always buy an inexpensive analogue that will very quickly pay for itself, performing the same functions.
Very often it turns out that the need to use a cutting tool suddenly arose, but it was not part of the plans to buy something expensive that is unknown when it will be needed (if needed at all).
In this case it is cutting shears for metal they will be very useful.
That is why cutting attachment found it on a drill wide application in many branches of human activity: repair, installation, dismantling and restoration.
Good luck with your purchase and enjoy working with the “Cricket” attachment for cutting metal!
