Motoblock MB 1 beam characteristics description. Functionality of walk-behind tractors under the Luch brand. Prices in Russia
Motoblocks of old brands, developed and produced in the 80s, which include the “Luch MB-1”, are distinguished by the maximum simplicity of design and the elementary nature of all engineering solutions. This, of course, very far from ideal, light agricultural equipment was still made of very strong and high-quality steel. And it is characterized by amazing reliability and durability (which cannot be said about most modern walk-behind tractors). "Luch MB-1" is a device on which you can cultivate your garden almost all your life. With proper care, the number of breakdowns and repairs is reduced to a minimum.
The Luch MB-1 walk-behind tractor is in the same line with several other modifications of such equipment, which differ only in names, but are very similar both in appearance and in the design of all parts and assemblies. And the factory index for all is the same - “MB-1” (there is also an absolutely identical version, differing only in the shape of the fuel tank - “MB-5040”).
The names for their products were chosen by manufacturing enterprises, many of which belonged to the military-industrial complex and the aviation industry. The manufacturer of the Luch MB-1 walk-behind tractor was the Perm Production Association Motorostroitel named after Sverdlov (now JSC UEC Perm Motors), a manufacturer of aircraft engines.
The eighties and nineties of the twentieth century became for this plant the time when its products “came down from heaven to earth.” The line of manufactured equipment has been replenished with new models of gas turbine equipment intended for operation as part of gas pumping units of compressor stations of main gas pipelines and gas turbine power plants.
And also, in the light of the general “fashion for conversion” - consumer goods, among which, since 1985, was the Luch MB-1. In previous years, there was no point in producing walk-behind tractors in the Soviet Union: there was no market demand for them. Personal gardens were plowed and cultivated by collective farm tractors, either free of charge or for a reasonable fee. There was always a lot of gasoline and diesel fuel in farms, and they cost mere pennies. Years of destruction previous system Agriculture nationwide - the second half of the 80s and all of the 90s - became a time of expansion of the production and use of domestic walk-behind tractors.
The main products of the Perm Motors plant.
Currently (more precisely, since the beginning of the 2000s), Luch walk-behind tractors and other non-core “small” equipment have been removed from the lists of products produced by the Perm plant: it again produces only turbojet aircraft engines and industrial gas turbine mechanisms. This is also a nationwide trend: the production of walk-behind tractors has been abandoned everywhere at similar enterprises.
However, many of the Luch MB-1 walk-behind tractors sold back in the last century are not only in working condition, but also work season after season without serious breakdowns; pass from hand to hand and are considered a familiar assistant in the households of families from different regions of Russia and the CIS. Not every mechanism is able to demonstrate such durability in use.
The design of this equipment is so universal that analogues of the Luch MB-1 walk-behind tractor are still produced by the Chinese, as well as several enterprises in Russia, which, under the guise own production, these walk-behind tractors are made from the same Chinese parts and components.
The Luch MB-1 walk-behind tractor is a compact, relatively lightweight unit for cultivating soil on personal plots and vegetable gardens, as well as for some other agricultural work. It is as simple as possible in design and quite convenient to use. Maintenance and repair are also not something complicated, requiring special knowledge or training. All you need to do is read the instruction manual. And spare parts are available and inexpensive.
Initially, the Luch MB-1 walk-behind tractor is equipped only with a soil cultivator designed for loosening and turning over the soil. But, complete with other additional mounted implements, purchased separately, this walk-behind tractor can not only cultivate, but also plow light “garden” soils; harrow; cut and clear furrows, hill up and weed rows; dig up potatoes and other root vegetables; mow; transport goods.
The compatibility of the walk-behind tractor with additional attachments is good, but when using them with the MB-1, of course, you must carefully follow the instructions contained in the operating manual for each attachment. A powerful and economical four-stroke engine allows you to use the walk-behind tractor in various household works.
Structurally, this walk-behind tractor consists of the following main parts: engine; clutch mechanism; gearbox; handles with controls; two tire wheels (or four cultivators). Details about the engine are given below. the clutch mechanism is designed to transmit the energy of the crankshaft torque from the engine to the gearbox and consists of two belts; forward pulley; reverse pulley; drive pulley; gear pulley, rods; forward and reverse levers, and springs.
The gearbox is designed to change gear ratio and transmission of rotational energy from the gear pulley to the wheels and working equipment. The chain reducer consists of two halves of the housing; chains; shift shaft; shift knobs; three blocks of sprockets and an output shaft.
The controls located on the handles are used to change the operating modes of the engine and the direction of movement of the walk-behind tractor. They consist of: the steering wheel itself; motor control lever; gear shift knobs. The steering wheel is attached with four bolts to the gearbox angles, and it is equipped with height adjustment.
The engine control lever is attached to the right handlebar with a screw, which is connected to the throttle valve of the regulator by a cable through a lever and a spring. On the left handle of the steering wheel, on top, there is a forward lever, which is connected to the forward pulley through a rod, chain and spring. And below, on the same left handle, there is a reverse lever, which is connected through a chain, rod and spring to the lever on which the reverse pulley is installed. The transmission provides operation in 2 forward and 2 reverse gears.
The wheels on the Luch MB-1 walk-behind tractors are either pneumatic or made of cast rubber, size – 4.00×10″. External part The tread is most often made in the form of a traditional herringbone, and when installing such wheels on a walk-behind tractor, they must be placed with the corners forward. And to get the best results when plowing, hilling and digging up root crops, it makes sense to replace rubber wheels with metal ones with lugs. Instead of wheels, a cultivator can be installed on the output shaft of the gearbox.
The walk-behind tractor is equipped with a DM-1 engine. This is a four-stroke single-cylinder carburetor air-cooled gasoline engine with a working volume of 316 cubic centimeters and a power of 3.7 kW (5 Horse power). Piston diameter –76 mm; piston stroke – 70 mm. Engine lubrication system - splash and in the oil sump; ignition system – contactless, electronic, with spark plug “A17B” (AII-I GOST 2043-75).
Starting is carried out by a built-in manual starter. The direction of rotation of the crankshaft is counterclockwise (view from the crankshaft pulley). The permissible engine tilt angle is no more than eight degrees.
The arrow indicates the screw for adjusting the fuel supply to the carburetor of the Luch MB-1 walk-behind tractor.
Modern Chinese analogues of the MB-1 are equipped with Lifan, Lianlong, Vanguard, and Briggs and Stratton engines. And also the CADVI 168F-2A motor (Kaluga Engine), which is produced in Kaluga from foreign components and is similar in its technical characteristics to DM-1. In general, for its time, “DM-1” was a very progressive engine option for compact agricultural machinery. Many walk-behind tractors of those years were equipped not with four-stroke, but with two-stroke engines.
The engine oil must be changed after the first five hours of operation. Then - every 25-30 hours of operation. Mineral automotive motor oil for carburetor engines is suitable for the engine of the Luch MB-1 walk-behind tractor. The oil in the walk-behind tractor transmission is changed every 100 hours of operation.
The transmission of the Luch, like all old walk-behind tractors, is worm-gear. This is the simplest option, but it is the most reliable and durable.
The clutch on the walk-behind tractor is manual, with drive V-belts. The transmission from the engine to the gearbox (forward and reverse), and from the engine to the mounted implements, is V-belt. Chain reduction gear: 1st gear – 1:17, 2nd gear – 1:7.
Technical specifications in numbers
- The weight of the walk-behind tractor is 100 kg.
- Travel speed is from 3.6 to 9 km/h.
- Overall dimensions: length – 1.5 m; width – 60 cm; height – 1.15 m.
- Ground clearance – 140 mm.
- Working track width – 570 mm; transport gauge – 310 mm;
- The minimum turning radius is 1.1 m.
- Traction force – not less than 100 kgf.
- The working width of the equipment cultivator is adjustable, from 725 to 1200 mm; diameter – 360 mm.
- Average fuel consumption is from 1.5 to 2 liters of gasoline per hour.
- The volume of the fuel tank is 3.6 liters of fuel.
The Luch MB 1 walk-behind tractor is used for operation on small homestead farms, vegetable gardens and gardens for individual use, as well as in areas located on marshy areas, shallow forest areas and suburban areas. This model is produced in Russia and is not very common. The equipment is suitable for working with light soils.
The Luch MB 1 model is distinguished by ease of operation and small sizes. An economical and powerful motor installed in a walk-behind tractor allows it to be used to perform various operations. The model is aggregated with various mounted implements, which allow:
- clear and make furrows;
- plow;
- harrow;
- dig up and hill up root crops;
- water;
- spray plants;
- remove snow;
- loosen the soil;
- mow the grass;
- transport goods;
- spray the plants.
Video
Working with Luch MB 1 equipment does not require special training. However, each attachment will have to be inspected and studied (the rules of use are described in detail in the operating manual). Otherwise, problems may occur when working with the walk-behind tractor.
In the factory configuration, the equipment comes with cultivators designed for turning over and loosening soil, extension cords and special wheels.
Various modifications of the Luch MB 1 model differ in the installed engines, which can be either imported or domestic.
Among the features of the model are:
- ease of operation of the walk-behind tractor. Working with it does not require serious physical effort;
- the presence of a chain gearbox with a V-belt drive, ensuring smooth movements of the equipment;
- quick-release wheels and a removable steering wheel make the device very compact and greatly facilitate its transportation;
- the steering wheel is vertically adjustable;
- wheels with pneumatic rubber tires and large tread provide good traction;
- protective fenders installed on the wheels protect against dirt, extending the service life of the equipment;
- reliable transmission with 2 forward and 2 reverse gears;
- powerful engines ensure efficient and productive operation of the walk-behind tractor.
Specifications
The weight of the Luch MB 1 model is 100 kg. In this case, the equipment can move at a speed of 3.6-9 km/h.
Motoblock dimensions:
- length – 1500 mm;
- width – 600 mm;
- height – 1150 mm;
- ground clearance - 140 mm;
- working track – 570 mm;
- transport gauge – 310 mm;
- minimum turning radius – 1100 mm.
The working width of the equipment cultivator is 725-1200 mm, diameter – 360 mm.
Fuel consumption
The average fuel consumption of the Luch MB 1 model is 1.5-2 liters per hour. Fuel tank holds up to 3.6 liters of fuel.
Engine
The Luch MB 1 walk-behind tractor can be equipped with various options engines of the Subaru, Lian-Long, Vanguard and Lifan brands. However, the most widely used versions are those with the KADVI 168F-2A power plant, produced using foreign components using Honda technology. This unit with overhead cylinders is characterized by a small specific consumption fuel, low weight, excellent design parameters and minimal noise levels.
The 4-stroke 1-cylinder gasoline engine has a forced air cooling, carburetor and built-in manual starter. The lubrication system is carried out by splashing. The engine is started using a built-in manual starter.
Engine characteristics:
- working volume – 0.316 l;
- rated power – 3.7 (5) kW (hp);
- rotation speed – 3200 rpm;
- permissible motor tilt angle – 8 degrees;
- cylinder diameter – 76 mm.
The unit of the Luch MB 1 walk-behind tractor is unpretentious and runs on A-76, A-80 and AI-92 gasoline.
There are certain rules when working with an engine. The manufacturer does not recommend refueling the tank while the engine is running and touching the spark plug bracket or ignition wire.
Currently, special equipment is used everywhere. Its presence is especially necessary in agricultural and agricultural production. Here various models are purchased by both private gardeners and commercial organizations. The most popular are walk-behind tractors that allow you to fully cultivate arable land. In this case, you need to consider the Luch walk-behind tractor in detail, as well as find out some nuances about repairs and reviews from the owners (owners).
Motoblock “Luch” has its pros and cons
Description of the walk-behind tractor Luch MB 1
- Proper assembly quality of the unit.
- Long service life of the walk-behind tractor.
- Installed reliable engine for walk-behind tractor brand Luch.
- The device differs from other equipment in its unpretentiousness.
- An impressive range of mileage between maintenance.
- Low oil and fuel consumption.
- High efficiency rates compared to similar models.
- Large selection of attachments for the cultivator.
- Easy to repair and maintain the device.
- You can easily find spare parts for the unit on sale.
All this does this type special equipment is irreplaceable and capable of competing even with modern models. It should immediately be noted that this version of special transport received whole line improved modifications.
In this video you will learn more about the Luch walk-behind tractor:
Important! Despite the build quality, as well as unpretentiousness, for a long service life of Luch brand equipment, it is necessary to regularly carry out maintenance and replace consumables.
Technical characteristics of the walk-behind tractor Luch MB 1
The description of the motor-cultivator (motoblock) Beam MB 1 should begin with a consideration of the technical characteristics. For this technical product The following functional features are characteristic:
- this type of special equipment has a curb weight of 100 kilograms;
- the maximum speed of the device reaches 9 kilometers per hour;
- This device is characterized by quite small dimensions;
- length, width and height of equipment (1500×650×1150 millimeters);
- fairly low clearance to the road (only 140 millimeters);
- working track is 570 millimeters;
- the transport gauge has a size of 310 millimeters;
- The equipment is equipped with a standard transmission with two gears.
The gearbox allows you to move at one speed forward, as well as one gear back. It should be noted that maximum speed It is quite enough for treating acidified soil.
Important! To ensure a long service life of this motor-cultivator, it is not recommended to operate it constantly at high speeds and maximum speed, because of this, parts wear out much faster.
What engine is used for the Luch MB 1 walk-behind tractor
This model of walk-behind tractor different times equipped with various power plants. Engines from the manufacturer Subaru, as well as Lian-Long, were mounted here. Subsequently, preference was given to more powerful Lifan power plants. Also, at one time, large Vanguard brand motors were installed on the Luch MB 1 walk-behind tractor.
However, despite all this, the most successful model was the domestically produced KADVI 168F-2A motor. This power plant mainly contains spare parts from the Japanese brand Honda. In general, we can say that the most successful engine is an ingenious joint creation of Japanese and Russian engineers. Distinctive feature the unit is top position groups of cylinders.
The installation is also characterized by high accelerating power. With all this, the engine of this brand does not consume much fuel and also has an impressive service life.
It is worth noting that among the main advantages of the KADVI 168F 2A motor are its attractive design, relatively low weight, as well as low fuel consumption and unpretentiousness.
Repair instructions for walk-behind tractor Luch MB 1
Although the Luch MB 1 walk-behind tractor is extremely reliable and unpretentious, it, like any other installation, requires timely maintenance and repair. Let's consider the main recommendations from the walk-behind tractor operating manual, which can extend the life of the equipment, as well as maintain it in a constant working rhythm:
- the instructions for working with the cultivator contain advice on the mandatory running-in of special equipment;
- immediately after purchase, you need to check the level of consumables, as well as lubricating fluids;
- as with any other soil treatment device, Consumables change by hour, not mileage;
- it is necessary to carry out both scheduled maintenance and comprehensive maintenance of the walk-behind tractor;
- it is necessary to replace parts only with the original or a high-quality analogue, which significantly increases the service life;
- Do not overload this device with work at the final stage before carrying out Maintenance;
- You should always monitor the lubrication level in all power elements (transmission, gearbox, and engine).
It should be understood that special equipment is specific and has nothing in common with conventional vehicles. That is why complex renovation work It's better to trust the experts. During operation of the Luch MB 1 model, you should use 92 gasoline, and also occasionally clean the engine by adding fuel with a high octane number (95 gasoline).
Important! The frequency of scheduled and comprehensive maintenance should be clarified in accordance with the recommendations that are present in the manual for the walk-behind tractor or power plant itself.
Tillage can be effective only if suitable tools. One of them is the Luch walk-behind tractor. But they must be used meaningfully and competently, as clearly as possible.
Peculiarities
The Luch walk-behind tractor, like many other domestic machines of recent decades, was the result of conversion. It began to be produced at the facilities of Perm Motors OJSC, which previously was exclusively engaged in the supply of helicopter engines. Consumers note that these devices:
- are relatively inexpensive and assembled properly;
- can be used at any time of the year;
- they work calmly on all brands of gasoline, even AI-76;
- equipped with the same attachments that are used for other Russian walk-behind tractors;
- They extremely rarely create problems for owners (only occasionally there are mentions of the inconvenience and unreliability of individual copies).
Let's take a closer look at exactly how a walk-behind tractor of any model is constructed, regardless of size. The ignition circuit involves the use of special spark plugs. In addition to them, the system includes:
- converter;
- stator;
- magnetic shoe;
- button to turn off.
It is useful to consider other components using the example of the MB-1 model. This version, released back in the 1980s, is very simple in its technical structure. But such simplicity can even be considered a virtue. The clutch, which transmits the energy generated by the engine to the gearbox, is made of a pair of belts. And also in the clutch there is:
- drive, front and rear pulleys;
- gear pulley;
- traction;
- front and rear arms;
- special springs.
The gear unit changes the gear ratio, simultaneously transmitting rotational energy to the wheels and working tools. The MB-1 model is equipped with a chain reducer, which, in addition to chains, includes:
- body (assembled from symmetrical halves);
- switching shaft and handle for its control;
- force output shaft;
- three blocks of stars.
The steering mechanism, thanks to the height adjustment function, can easily be adjusted to specific users. The right side of the steering wheel is complemented by a lever with which the engine is controlled. This lever acts through a special cable on the throttle valve. But on the left side of the steering wheel there is a forward lever connected to a pulley of the same name. Just below is the reverse lever.
The transmission is capable of operating in a pair of forward and a pair of reverse gears. The most important element the chassis consists of wheels; they can be inflatable or made of solid rubber.
Attention: those farmers who want to achieve the highest effect from their equipment should change rubber movers to steel ones, supplemented with lugs. The motor on the walk-behind tractor of this model is of the DM-1 type. The supply of a mixture of fuel and air to a single cylinder occurs after it is prepared in the carburetor.
The lineup
The already disassembled version of “MB-1” continues to be produced today, but with an imported 5 hp engine. With. A more advanced option is “Luch MB 5040”. This model starts much easier, and the motors installed on it allow forced lubrication. The power has not changed compared to its predecessor. As for modification 5141, it turned out to be extremely unsuccessful, unclaimed, and the production of walk-behind tractors of this model was stopped long ago.
Attachments
"Beams" are popular primarily because they allow the use of a wide range of attachments, including those suitable for other agricultural machinery. Most often, crescent cutters are included in the kit. You need to wear gloves to assemble and install them. Before starting work, experts advise checking whether everything is secured correctly. Detailed and up-to-date information can always be obtained from the instructions for a specific device.
The power of Luch walk-behind tractors allows you to confidently use them to move:
- trailers;
- light carts;
- adapters.
The best carts are TM-300 and TM-500. Much more compatible adapters and trailers have been created. Important: during break-in, operation under load is prohibited. All parts of the device must first adapt to normal operation on their own. Mowers of any type, both rotary and segmented, can be attached to Luch walk-behind tractors.
As practice shows, the use of lugs for plowing the land dramatically increases the efficiency of walk-behind tractors. Depending on the choice of the consumer, the hooks can be made of steel or made of dense grades of rubber. The first option is better suited for working on the most dense and rough soil. The difference between lugs is related to their diameter. When choosing it, it is better to focus on the size of the walk-behind tractor wheels.
Rarely does a farmer operate motorized equipment without a plow. But in any case, this tool will have to be secured correctly. Judging by the experience of farmers, only the coulter makes it possible to adjust the depth of the ploughshare into the ground in an optimal way. To remove snow, you can use either a snow blower or a shovel. Both auger snow blowers and dumps are combined with Luch various types(width from 80 to 100 cm).
On personal plots for planting and harvesting potatoes and other root crops, you can use all existing potato diggers and potato planters, both Russian and imported. The walk-behind tractor allows you to attach such accessories both to a rigid hitch and with bolts. The rest of the equipment can be purchased at your discretion. Allowed use:
- weighting devices;
- track blocks;
- special couplings (including used ones).
Subtleties of operation
Regardless of which specific modification of the Luch walk-behind tractor the farmers received, they must carefully read the instructions. She is the one who will tell you as accurately as possible about all the nuances of the design and its handling. You can fill in gasoline of all brands in the range AI-76 - AI-95. As for changing the lubricating oil, it should be done every 50-100 operating hours. Exact time determined individually, focusing on how large the load is.
When starting for the first time, be sure to fill the gas tank; Of course, the walk-behind tractor must be completely assembled. The break-in time is up to 20 hours. By the end of it, the gearbox and motor will adapt to normal load. Before you set the ignition, you must check the spark plugs. It is because of them that problems and failures often arise.
Experts recommend always keeping a backup candle ready. If necessary, clean the candles from carbon deposits; but both when installing new devices and when cleaning old ones, you need to carefully set the gap. It should be no less than 0.1 and no more than 0.15 mm. When putting a new walk-behind tractor into operation, it is necessary to adjust the carburetor. It is also carried out when failures occur and when installing a new spare part.
First of all, tighten the screws on the jets until they stop. This must be done more carefully. Next, they are unscrewed back 1¼ turns. When this is done, start the engine and warm it up for 20 minutes. When exiting operating temperature turn the throttle valve to minimum.
The screw is used to set the lowest stable value of the idle speed. Then the largest stable value is found. Repeat these steps again to ensure stable operation of the device. To move the walk-behind tractor, you must turn off the engine. When the engine is running, it is very easy to damage certain parts of the device.
For normal forward movement, you need to wear belts of the A-1213 format. These belts are also suitable for Oka and Cascade. In some cases, in order for the drive belts to transmit the necessary impulse, the gearbox needs to be strengthened. Important: when overhauling an engine, it is not always necessary to remove the flywheel. This is only required when replacing:
- shaft;
- bearing;
- oil seal;
- dowels
Specifications
IN technical passport on the Luch walk-behind tractors it is reported that their length is 150 cm with a width of 60 and a height of 100 cm. The weight of the structure reaches 100 kg. The device can travel at speeds of 3.6-9 km/h. The track width of the walk-behind tractor is 59 cm, and the ground clearance is 33 cm. “Beams” are capable of climbing a slope with a longitudinal inclination of 20 degrees. For a transverse slope, the critical value is 24 degrees.
The walk-behind tractor has 2 forward and 2 reverse gears.
Important: workers must wear earplugs. After all, the sound volume reaches 92 dB. The cultivator for the walk-behind tractor has a width from 72 to 113 cm. Its diameter is 36 cm.
This article is dedicated to the reliable “assistant” of every summer resident. We are talking about the Luch MB 1 walk-behind tractor. This model is intended for small land plots, own gardens, as well as for garden care. In addition, the walk-behind tractor can be used for work in suburban areas and swampy areas. Despite the fact that the walk-behind tractor is produced in Russia, the model is not particularly popular. The manufacturer recommends cultivating light soils.
Main distinctive characteristics"Luch MB 1" is easy to use and compact in size. It is worth considering that the compact dimensions allow you to transport the walk-behind tractor. The multifunctionality of the unit is achieved by compatibility with big amount attachments. The main power unit consumes a small amount of fuel. This in turn will save cash on fuel, which is a significant help in our time. Beam MB 1 can perform the following work:
- plow the ground;
- harrow;
- dig up root crops;
- clear snow from the yard, garden, vegetable garden;
- transport various cargoes;
- water, spray plants.
To start working with a walk-behind tractor, you don’t need higher education. The unit is very easy to use. But, before starting the work process, you will still have to study the design and operating principle of the attachments. In case of any problems, the operator can always use the repair instructions for the Luch MB 1 walk-behind tractor.
Characteristics of the walk-behind tractor
The engine is the KADVI 168F-2A power unit, which was developed similar to the famous Japanese company Honda. The engine is 4-stroke, with one cylinder. The walk-behind tractor uses gasoline as fuel. Air cooling system. Principle of operation fuel system based on the operating principle of the carburetor of the Luch walk-behind tractor. The productive element is started by a manual starter. Engine power is 5 hp. Recommended fuel types: AI-76, AI-80, AI-92.
While the walk-behind tractor is operating, it is strictly forbidden (by the manufacturer) to refuel the gas tank or come into contact with the tip of the spark plug and the ignition wire. Basic dimensions Beam MB 1: length-1500 mm; width - 600 mm; height - 1150 mm. The minimum turning radius is 1100 mm. In the working position, the unit grips 700-1150 mm, the grip depth is 360 mm. The gas tank is designed for 3.6 liters. In this case, fuel consumption is 1.5-2 liters. at one o'clock.
Detailed review of "LUCH"
When purchased, the factory equipment includes pneumatic wheels, rototillers and extension cords. Beam MB 1 has several modifications. The models differ from each other in the installed power plant. Thus, the manufacturer installs Japanese Subaru engines. In addition, there are models with engines from such brands as Lifan, Vanguard, Lian-Long. Without a doubt, the most models were produced with the domestically produced KADVI 168F-2A engine. During its development, Honda technologies were not absent.
The model is very reliable, serious breakdowns are quite rare. Due to the fast and confident operation of the walk-behind tractor, the operator is able to process land plot productive. Which in turn will have a positive impact on the harvest and profit. Resistance to low temperatures allows you to operate the walk-behind tractor in winter.
Let's get back to the renovation. Problems with the engine and walk-behind tractor in general occur very rarely. The main “troubles” can be caused by insufficient oil level in the engine. As a result, the well-known knock occurs. Therefore, you need to constantly monitor the oil level! Let us list the main advantages of the model:
- Simple and lightweight system management. The operator does not need to exert much physical effort to cultivate the garden.
- High productivity, which in turn has a positive effect on operation as a whole.
- The chain reducer ensures smooth operation of the unit.
- Compact dimensions make it possible to transport the walk-behind tractor.
- Special wings installed at the bottom serve as a protective barrier against dust and dirt. These protective elements of the housing significantly extend the service life of the engine.
- A functional gearbox allows you to select the required speed mode (2 forward and 2 reverse gears).
Pneumatic wheels have tenacious contact with the ground, slipping is not possible.
