Small kitchen table on wheels. We do it ourselves. How to make a serving table on wheels with your own hands Make a serving table on wheels yourself
Do wooden table on wheels that can be moved to any location. It will be indispensable for outdoor recreation.
All materials are taken from cut down trees, so there is no need to destroy living trees specifically for this purpose.
All table dimensions are arbitrary - the article only describes the method.
Consider the height of the table before you start cutting the wood.
Tabletop
We cut the wood to the required thickness. Use a chainsaw, which will greatly speed up the whole process.
Table base
We cut off a small piece for the table top with a lid. We cut out small pieces at the same distance from each other, as in the photo above. We insert prepared boards of the same size into these slots. There is little space left in the center: the boards do not fit tightly together. Then we will put a “lid” on top.
The boards may not be enough for stability - install three boards for the legs.
We attach the rollers with regular bolts to the bottom of the legs.
In the center of the log in the upper part we drive an iron rod or screw; the table top will be attached to it.
Tabletop installation
The base must be stable and not tilt to one side, otherwise the tabletop will not hold up.
If the base is still a little uneven, do everything possible to correct it.
We fix the tabletop to the base using a rod or screw.
Finishing touches
The table is ready! It stands level, the tabletop is tightly secured to the base, and can be moved to any location on casters. Next, you can paint the table in any suitable color.
Full tables and small tables are very important practical elements in home furnishing, especially when it comes to the kitchen or dining room. Small kitchen table on wheels can become an important functional addition to any family.
In this publication, we will look at an example of how you can make a modern mobile kitchen table from maple wood with your own hands. His work surface made of thick boards, and the entire structure is placed on swivel wheels, with which you can easily move the table to any place.
Study the structure of the table in our example well, then buy all the necessary components for its manufacture (maple wood, swivel wheels, fittings - see below), get everything necessary tools(see below), and only then start production. If you wish, you can modify the dimensions/details of the table at your discretion.
§ To make this mobile table, you need the following tools and materials ↓
Tools – workbench with vice and clamps; compass; pencil; ruler; square; lamellar router; 4 weima; good set of clamps; electric hacksaw; end plane; tzinubel; drilling machine; Forstner drill with a diameter of 25 mm; twist drills with a diameter of 3 and 5 mm and a twist drill corresponding to the diameter of the steering wheel bolts; chisel 15 mm wide; mallet; frame bow saw; router with work table; groove cutter with a diameter of 12 mm; knife; tenon saw; jointer; screwdriver; sanding block; countersink drill; spanner to the size of the bolts of the swivel wheels; brush. We will also need other useful tools: cordless screwdriver; grinding machine; electric drill; dividing compass; marking knife; band saw.
Materials – maple blanks (see specification below); packaging of lamellas; PVA glue; sandpaper with grit from 150 to 300; 4 swivel castors with built-in brakes ( overall height wheel block about 100 mm); Danish oil for exterior finishing kitchen table; 28 screws from stainless steel with countersunk heads; stainless steel hanger with fittings.
Specification – 5 boards 630 × 140 × 30 mm (tabletop); 4 bars 710 × 50 × 50 mm (legs); 2 boards 530 × 80 × 20 mm (side planks); 1 board 510 × 80 × 20 mm (back plank); 4 bars 550 × 30 × 30 mm (spacers); 10 boards 590 × 70 × 12 mm (slats for shelves) – all maple blanks.
§ We make a small kitchen table on wheels with our own hands: manufacturing stages
1 . Place five tabletop boards on the workbench close to each other so that the grain directions at the ends of adjacent boards do not coincide. Mark the locations for the slats in the center and 50mm from the ends. Set the lamella router to 15mm and select the slots for the lamellas in all the boards. Remove dust, apply glue to the slats and sockets, connect the boards and clamp with three clamps and additional clamps (Fig. 1).
2 . Mark top and bottom on all legs. Mark 25mm square sockets along the center line at a distance of 225mm from the top and 95mm from the bottom. Draw diagonals to determine the locations of the leg bolts. Drill sockets 40mm deep using a 25mm Forstner drill bit. Drill holes in the lower ends of the legs corresponding to the diameter of the wheel block bolts (Fig. 2). If you purchased a different size wheel blocks, be sure to adjust the length of the legs accordingly.
3 . Press the legs to the workbench with clamps. Using a chisel and mallet, select blind square sockets with a side of 25 mm and a depth of 40 mm around the drilled holes (Fig. 3). Clean the bottoms of the nests and remove waste. When selecting sockets, do not rest the chisel on the edge of the socket.
4 . Mark the tenons on the spacers at a distance of 40 mm from the ends. After this, set the cutting depth of the frame bow saw to 2.5 mm and cut out the shoulders of the tenons (see Fig. 4). Then clean off the tenons with a chisel. Try do the shoulders are rectangular so that the tenons are flush with the surfaces of the legs. Be sure to check the structure for squareness with a square.
5 . Mark grooves 75 mm long, 12 mm wide and 20 mm deep at the ends of the legs, positioning them so that the planks, entering the grooves, are at a distance of 10 mm from the front surface. Attach the router to the workbench, install slot cutter 12 mm and a guide bar of 14 mm, press the limiting block from scrap wood with a clamp at a distance of 75 mm and select the grooves (Fig. 5). 6 . Make marks on the planks at a distance of 20 mm from the ends. Cut tenons 20 mm long, 75 mm wide and 12 mm thick. Clean with a knife downsides so that the tenons fit into the open 12 mm grooves (Fig. 6).
7 . Plane the surface of the glued tabletop with a jointer. Using a lamellar router, select the grooves on internal surfaces both side bars. Using a tenon saw, cut ties and fixing blocks from scrap wood suitable sizes(Fig. 7). Clean up your workbench and remove all small debris with a vacuum cleaner. If the surface of your workbench is heavily scratched or has dried glue stains, place a sheet of clean plywood on it. It is very important that the surface is completely clean. Place the table top face down on a workbench or plywood and dry attach the legs, spacers and slats to it for testing (without glue).
If you are satisfied with the final result of the assembly, apply glue to the joints and tighten with clamps. After the glue has dried, remove the clamps, attach the ties and fixing blocks securing the tabletop to the planks with screws to the desired places, and use a chisel and sandpaper to remove traces of the dried glue.
Useful advice!
To prevent the drill from vibrating and when working with a countersink drill, the edges of the hole are not charred, set the drill depth stop to 5 mm, and then quickly and firmly lower and raise the drill. Before the drill bit touches the wood, make sure the drill is running at full speed.
8 . Make two templates for shelf strips from scrap wood and mark the positions of the screw holes on them at a distance of 25 mm from the ends. One template should have one hole in the middle, the second should have two holes at a distance of 20 mm from the edges. Make sure the markings are correct.
Using these templates, twist drill With a diameter of 5 mm, drill holes in all strips and countersink them (Fig. 8). After drilling each hole, turn off the machine and use a brush to remove sawdust from the corners of the template. Work carefully to keep the holes clean.
9 . Remove sawdust and wood waste from the workbench and place the table on it with the top down so that the ends of the legs are at a comfortable height for you. Use keys to strengthen wheels(Fig. 9). Go over the entire product with an end plane, cleaning the ends and sharp corners. Make sure all remaining adhesive is removed. Move the table into bright daylight and carefully inspect the areas around the joints. To test, you can apply White Spirit to the surface with a brush - this will show where traces of glue remain. Brush sawdust off the product and remove wood dust with a cotton cloth.
10 . Move to a clean area and use a brush to apply a thin layer of Danish oil to all surfaces of the table and ten prepared slats. Place planks with two holes at the ends on the spacers so that they fit tightly to the legs, and the ends are flush with the side edges of the legs (Fig. 10). Drill installation holes with a diameter of 3 mm and attach the strips with screws. Place the remaining planks with one hole at the ends between them at a distance of 30 mm from each other and attach them with screws. To ensure even spacing, cut a 30mm wide strip of scrap wood and lay it between adjacent strips before inserting the screws. Attach the hanger in place.
Other design options for a small kitchen table on wheels (⇓)
Serving tables are coming back into fashion and are especially relevant before the holidays. Thanks to its compact size and convenient wheels, this table can be at hand anywhere in the house. Need extra space for drinks in your living room when guests arrive? No place to put sauce and chips when you and your family decide to watch a movie on the couch in the evening? Tired of running between the dining room and the kitchen, setting the table? It is much easier to arrange glasses, cutlery and snacks on the serving table and calmly bring them to the right place, rather than having an obstacle race for each plate.
Serving table by Cattelan Italia
Most serving tables are very compact in size, so they are suitable even for small apartments. In addition, in conditions of limited living space, it is always better to give preference to mobile and transformable pieces of furniture over stationary ones. For example, it is worth considering that a table on wheels will be more convenient than a regular stationary tea table, because it is much easier to move it to a corner if it is in the way, or transport it to a room in which at the moment There are not enough horizontal planes.
Serving table from Jacues Bar Cart
For small apartments, a folding serving table is perfect, which can literally be hidden in a closet when it is no longer needed.
Folding table from Rexite
For studio apartments or those who like to organize unexpected gatherings on the terrace, a compact folding table may be suitable, which, if necessary, turns into a dining area for four people, but when folded does not take up much space.
Buffet table from Flix - mobile solution
Remember that round models are usually more compact than rectangular ones, West Elm
A serving table can also come in handy in the kitchen, especially if you don’t have enough space in stationary drawers and shelves.
Container table for the kitchen, Miniforms
Of course, an important factor besides the size of the table is its appearance. Among the variety of models, you should focus on the general style of your interior.
Modern, minimalist model with an emphasis on a copper shelf from Miras
Table for fans of classical and baroque style from Modenese Gastone group
Table for outdoors and interiors in country style, Atmosphera
Embodiment Scandinavian style in the interior by Artek
What else should you pay attention to when choosing a serving table? Very often, it is these small objects that become the color or stylistic focal point of the entire interior, attracting the main attention. This is especially convenient for those who want to add some zest to the decor, but are hesitant to buy bright sofa or unusual designer wardrobe. A mobile and small table is just right as an accent for a living room or dining room, and at the same time it will not look intrusive.
The giant wheels of the Chariot brand table are an interior decoration in themselves. You can choose various options colors and finishes
An unusual combination of colors and materials in a model from Douglas & Company
It is worth paying attention to models with additional shelves and compartments in which it will be convenient to place the small things you need at hand.
Swivel shelves and bottle holders in a colorful Colé Italian Design Label table
When choosing furniture for your home, remember the wide variety available options, and don’t get hung up on the standard set: wardrobe, sofa, table. Even one small design item can significantly change the perception of the interior and become the starting point for creating your unique style.
Recycled aluminum table, Roost for Forma Living
Serving table – convenient and practical item interior, in which functionality and decorativeness are used. The folding version can be used at home, in a restaurant, and in office space. There are many models on sale, but it is quite possible to make a serving table with your own hands. How much it is really necessary and how successful a design idea can be - we will talk about this in this article.
Advantages
This amazing furniture attribute performs a variety of functions:
- An auxiliary surface during cooking and serving;
- Temporary workplace;
- Placement surface decorative items interior
Important! A convenient ergonomic design, equipped with wheels and comfortable lifting tabletops, will help get rid of the annoying running from the living room to the kitchen and back. It is enough to load everything you need onto the table once and bring it where you need it.
Design advantages:
- Everything that a regular one doesn't fit dining table, can be displayed on a compact serving hybrid. This is made possible by the fact that the table has additional opening parts and universal compartments in which you can put bottles or smaller household utensils.
- The lower shelves often have additional protective sides, mesh shelves and removable compartments.
- The structure usually weighs a little - up to 9 kg. Typically, this indicator depends on the material of the countertop.
- Minimal storage space required. And if the model is equipped with folding legs, the table instantly turns into a tray on which you can store food and drinks.
Important! The main advantage of a folding serving table is its ergonomic design details.
Serving table in the interior
A DIY serving table on wheels is a fashionable furniture accessory. Thanks to it, a new, more constructive and functional interior appears in the atmosphere of the home.
When arranging a room, you should consider several nuances:
- If you want to make a design in Chinese, African or Indian style more original, choose products made from natural tree species or MDF.
- For the Modern or High-Tech style, glass or metal products that have portable tabletops are suitable. Glass can be transparent, tinted or colored. On glass material There must be a protective polished edge that provides additional safety.
Important! Most efficient model– on wheels, such a unit has improved mobility. A variety of materials are used for their production; the shape can be the most bizarre. The most inexpensive option is a plastic folding serving table.
The design may contain special shelves, hooks, cutting board. Wheels can be large or small, there can be two or four.
Making your own table
To make a serving table with your own hands, drawings can be found in specialized magazines or on the Internet. Let's consider making a simple model, with two tabletops and a handle for transportation on one side.
First of all, you will need to prepare the following tools:
- Circular saw;
- Drills and drill sets;
- Screwdriver and screws;
- Pneumatic hammer;
- Grinding machine;
- Tassels;
- Roulettes;
- Pencil;
- Safety glasses;
- Respirator;
- Gloves.
To make a table on wheels with your own hands, you need to prepare the following materials:
- Board 50x100 mm - frame;
- Board 25x100 mm - tabletops;
- Rail 25x50 mm - edging;
- Paint;
- Putty;
- Finishing nails;
- Wheels.
Important! The lumber must be dry, otherwise the frame will cease to be strong and stable, cracks and gaps will appear in it.
Assembly
Included serving table includes the upper and lower bases, which connect the vertical posts to each other:
- Using circular saw, cut out four blanks 860 mm long and four blanks 320 mm long. These will be used as a base.
Important! All workpieces require pre-treatment with sandpaper. After assembly, leveling the surface in some places will not be possible.
- Using the drawing, we join the boards.
- We screw two screws into each joint. In this case, you should first drill holes of a smaller diameter with a drill. This is done so that the lumber does not split when screwing in the screw.
- We fasten the bases with vertical posts.
- We attach the legs, 780 mm high, from the outside to the prepared bases.
Important! To make it more convenient to fasten the frame with screws, you should use clamps.
- We saw the lumber into twenty planks for tabletops. The length of eighteen of them is 420 mm, two – 320 mm.
Important! To align the boards between the table legs, you need to temporarily secure a board of the same thickness using clamps.
- Ten planks are secured to the top base using screws or finishing nails.
- Eight planks are fixed on the lower base, in the middle, and shorter boards are fixed on the sides.
- We fix the edging along the long sides of the tabletops. The slats should have a length of 930 mm. For fastening we use finishing nails.
- We putty the formed recesses and holes.
- We sand the tabletops with sandpaper.
- Apply primer to the surface.
- We paint the resulting table.
- We fix the wheels with screws.
Important! In stores swivel wheels presented in a huge assortment. They are distinguished by design, material and construction. The recommended diameter is at least 80 mm.
Have you ever wanted to at least mentally be in the distant past in order to feel the spirituality and atmosphere of that time. Paying attention to our everyday bustle, boring and modest interiors, as well as the popularity of minimalism, let's make a serving table from a bygone era that would have the grace of court furniture, but also not be devoid of modernity.
A little background
This idea was inspired by not only the desire to have a piece of something from the past, but a funny and interesting film. One evening, having decided to watch something new from cinema, I typed “www.ivi.ru” into the search engine and came across a wonderful film that told the story of the formation of the monarchy. It was at that moment that inspiration struck, which did not leave me until the end of the work.
Throughout the film, I admired the grace of all the interior details in the kingdom's castle. I was so carried away by all sorts of little things that I completely did not notice the characters in the film. But the film soon ended, and in order to somehow distract myself from the obsession of starting to make this table at twelve at night, I decided to www.ivi.ru on the same site.
Required materials for the product:
LDSP (laminated chipboard);
- plywood 6 mm thick;
- plywood 12mm thick;
- round wooden block about 1.5 cm in diameter;
- special wood putty, you can use absolutely any color;
- metal round fittings with thread;
- 4 blocks measuring 50*40 mm;
- 2 blocks measuring 1.5*1.5 cm;
- beautiful self-adhesive film (opaque);
Preparatory work
First, draw a suitable flower and leaf template on paper, required sizes and shapes (but don’t get too carried away, you still have to cut it out); choose the width and height of our table and mark the required space on the plywood; Now let’s lay out and trace the flowers cut out of paper; We slightly adjust the drawing on the plywood, add branches to the flowers and leaves, and fill in the voids. Now we start cutting out the sketch with a jigsaw, using a figure saw, then carefully sand and paint the ends. And also inner side plywood.
Important tip: the jigsaw file must be sharp throughout the entire cutting process - replace it with a new one more often, then your pattern will be smooth and without beveled edges. From laminated chipboard we cut out 2 side panels for attaching the handles, putty the ends, make recesses and small holes for the screws, attach a round piece of wood pre-cut to size, putty the heads of our screws, sand them completely, and then paint the entire handle.
Cutting out the top and bottom parts
We cut out two rectangles from laminated chipboard - this is the top and lower table top, at first we already marked out how wide our table will be. Again we make recesses for the screws in the upper part of the first table top where the legs will be attached, and in the lower part of the table top where the handles are installed, we do all this with a small drill so that the chipboard does not fall apart.
We screw the handle to the top tabletop, putty the screws and cut edges of the tabletop, sand everything and paint. Now we take our self-adhesive film and glue it only on top part countertops. Now we attach the remaining legs with self-tapping screws and also putty. We cut out a stand for all sorts of bottles from plywood and sand it.
Connecting all the big parts
Now we have already screwed all the legs and handles, there is only a small matter left. We take our sawn surface, which we cut out at the very beginning, and fasten it with screws on the right and left sides. After that, we attach the shelf for bottles to the shelf holders.
