DIY chandelier from scrap materials: detailed master classes. How to make a beautiful chandelier from scrap materials Do-it-yourself homemade floor lamp
Self-production making decorative items is a creative and interesting process. Not at all difficult to make Wall lights with your own hands, which can beautifully complement the interior of the room, giving it, in addition to additional lighting, comfort and homely warmth. The convenience of making such crafts also lies in the fact that it does not require large material costs for the purchase of material. So, do, for example, wall sconce You can do it yourself, even using improvised means that can be found in every home. In our article we will look at examples of independent design of wall lighting fixtures with examples of photos of finished samples.
DIY wall lamps: what you need to make
In order to make a sconce with your own hands, you need tools, a base, an electrical wiring system with a base and a bulb, and materials for the lampshade.
As for the tools, we will not list a huge number of everything that may be needed in one case or another, but we will only say about the main ones that will be useful in one way or another, namely:
stationery (pencil, rulers, eraser, possibly a compass);
- roulette;
- jigsaw or fine file;
- a drill with drills to install a wall sconce with your own hands;
- a heated glue gun (it glues a variety of materials much more firmly than any other);
- scissors;
- paint or colored spray can.
DIY wall lamp: making a frame
The basis for the lamp will be a round or square board cut from an MDF sheet. It should have the dimensions of the future sconce with your own hands (photos are presented in the article). It is also necessary to make slots in the base for installing light bulb sockets. Their number will depend on how bright the lighting should be. When making slits, be sure to take into account the thickness of the bulbs in order to correctly calculate the distance between them.
It is also necessary to cut out the sidewalls for the perimeter of the base, and make a small gap in the bottom of them in order to pass the electrical wire. The sides are fastened with self-tapping screws, the places of the caps are covered with putty. It is advisable to use sandpaper to ensure even grouting.
Do-it-yourself wall lamps can include color design. The entire frame can be initially coated with a primer, which will ensure a long service life and painted in required color.
Fasteners or hooks are installed on the back of the side parts, with the help of which the lamp will be mounted to the wall.
We equip the lamp on the wall with our own hands with electrical wiring
For electricity supply equipment, you will need a power cord with a plug and a switch (you may have to buy one or use one left over from a non-working lamp). The socket can also be removed from obsolete lighting fixtures.
DIY wall lamps, or more precisely, their lampshades, are often made of flammable materials such as fabrics, paper, threads, etc. In order to avoid fire, it is worth using energy-saving fluorescent light bulbs, which have high luminous efficiency with low heating.
Light bulbs with sockets are attached to the finished frame, the wire is routed through the equipped hole. At this point, we can assume that the DIY wall lamp is half ready. Now it’s time to start making the lampshade.
DIY lampshade for sconces from scrap materials
There are many methods using materials such as wood (various twigs), fabrics, threads, etc. It is imperative to have a wire that can hold its shape well for a long time, but at the same time bend well.
DIY wooden wall lamp
After pruning large trees, various branches and snags remain, which can be successfully used to decorate wall lamps with your own hands. The photos show how a seemingly ordinary piece of driftwood turned into an elegant sconce. To do this, all I had to do was cut and sand the points, and make a hole inside for the electrical wire.
Another way to make a spectacular sconce from wood with your own hands is to decorate it with grapevine branches, placing them in different sequence. This lamp will become a real decoration for a room in eco style.
Beautiful DIY wall lamps (photos below) can be made from wicker. They can be made different ways weaving, but for beginners it’s worth starting with simple designs.
DIY sconce with thread lampshade
It is quite easy to make such a lamp for the wall with your own hands. To do this, you need to have a dense thread of any color (you can take white, or finished design paint in the required color), PVA glue and a balloon. The technology is very simple. First of all, we inflate the ball to the size that the lampshade should have and tie it tightly. We first soak the threads in glue, and then, having attached the tip to the base, we begin to wrap them around the ball in a chaotic manner. The winding density can be anything, it all depends on how bright the lighting should be emitted by the DIY wall sconce.
Having finished the winding, you can once again coat the entire workpiece with glue with a brush and hang it to dry. We remove the ball from the completely dry workpiece - to do this, it must first be burst. The lampshade is ready. If necessary, it can be painted in any color using spray paint. It is noteworthy that with such a do-it-yourself sconce (photos are presented in the article) you can emphasize any interior style, depending on the color of the lampshade: white will do minimalism, black will highlight high-tech, bright yellow or red will complement modernity, etc.
Chandelier is important element interior Lamps made by yourself look especially original and beautiful. There are many ideas for creating unusual chandeliers that look in no way inferior to expensive designer products.
However, in order to create high-quality beautiful thing, you need to decide on materials, style, and choose the most suitable technique for creating a lamp. To ensure that the work meets your expectations, follow the instructions without skipping a single point.
If desired, the master can make a design with remote control.
The frame is the base of the lighting fixture on which the lampshade or decorative elements are located. It must be durable. You can make it yourself or use the frame from an old chandelier. Thick metal wire is used as a homemade base, wooden slats, hoop, basket, plastic bottle, etc.
The choice of material for the base depends on the weight of the lampshade and the materials used. If you are creating a chandelier from paper or light fabric, then a plastic or wooden frame is sufficient; for models with heavy shades (metal, glass), it is better to use metal bases.
Restoring the frame from an old chandelier
If you have any in your pantry old chandelier with a metal base, then feel free to use it to make your fantasies come true. If the material is a little rusty or the paint is peeling, it’s not a problem. Alkyd enamel, acrylic paint or spray enamel will help solve this problem. Simply repaint the base any color you like to give your old chandelier a new lease of life.
Alkyd enamel lasts a long time on metal, but has a pungent odor. In addition, you will need to apply several layers to the base to avoid bald spots. Acrylic adheres well, but in order for it to stick, after drying you need to apply a layer of varnish. It is very easy and quick to paint with spray enamel, but it is better to do it outside or cover all surrounding surfaces with paper in advance. The choice is yours.
Once dry, decorate the base. decorative elements or put on a homemade shade.
How to make a new one with your own hands: options and step-by-step manufacturing instructions
Wooden chandeliers look original and natural. Ready frame can be decorated or left in its original form.
Step-by-step instructions for creating a wooden frame:
- Take 12 slats (length - from 30 to 45 cm), sand them with sandpaper.
- Make holes for the wire.
- Make holes in which to attach the lampshades.
- Treat the workpiece with paint with a natural wood tint.
- Connect the planks with self-tapping screws suitable design, for example, a hexagon.
To create a wire frame, strong carbon wire (diameter 1.5 mm) is used. If this is not the case, then use a material made of aluminum, cast iron or copper.
First, a base is created from thick wire; these can be round, geometric or fancy designs. It is advisable to supplement the base with stiffeners. You should also make a mount for the cartridge.
The frame can be made from a 5 liter plastic bottle. To do this, cut off the bottom of the container and then decorate with decorative elements.
What are the techniques for making ceiling lamps?
Ceiling lamps can be created using origami, carving, embossing, and decoupage techniques. Lamps made using knitting or weaving techniques also look very beautiful.
Original chandeliers made using the origami technique will be an excellent addition to a modern interior.
Important! When creating an origami lampshade, do not use very thick paper, since it will transmit light poorly.
If you're into crocheting, use a few doilies as a base for your lampshade. This chandelier looks amazing and can be hung in your bedroom to create an intimate atmosphere.
Homemade chandeliers with pendant lampshades consist of a frame and decor (paper butterflies, beads, wax paper, artificial flowers, etc.). These elements are attached to the fishing line with glue and then fixed to the base.
Chandeliers that are created from a certain material (thread, glue, special paste, rope, etc.) and a balloon are very popular among home craftsmen.
Ceiling lamps made of fabric can be painted with acrylic paints, use the decoupage technique, or place any decorative elements on the material.
What can you make a chandelier from at home?
A do-it-yourself chandelier is created from different materials:
- paper;
- threads;
- CDs;
- bottles (plastic, glass);
- cardboard;
- napkins;
- tree, etc.
The selected material must have the characteristics you need: safety, aesthetics, practicality, ease of maintenance, strength, durability, etc. In addition, the chandelier must match the interior of the room. Also consider the size of the room and the height of the ceiling. If the ceiling is low, then mount the lamp on a strip, but if its height is 3 m or more, then it will do suspended structure, which needs to be attached to a hook.
An energy-saving light bulb is more suitable for a homemade lamp, since it does not heat the body as much as a regular one. An additional bonus is energy savings.
Advantages and disadvantages of materials for decorating the ceiling of a chandelier with your own hands
When choosing a material for the chandelier body, focus on aesthetic properties and technical specifications. It is recommended to use materials that do not contain toxic substances, as they spread when heated.
Give preference to lampshade materials that are easy to care for. For example, fabric lamps collect dust faster, while plastic lamps are easier to wipe with a rag. And the paper body can be quickly replaced.
The choice of material also depends on the degree of lighting in the room. Clear glass transmits light best. And for a bedroom or children's room it is better to make a chandelier with dim light.
There is no doubt that properly executed kitchen lighting sets the tone for the entire interior. A chandelier can become the central element in this cozy and warm room.
Using scrap materials - or even waste - you can make a lampshade from threads, an eco-style lamp from jute twine, or plastic bottles, or you can make a real masterpiece - beautiful chandelier from wooden or glass beads.
You can also not only hang a lamp made by yourself in the kitchen or dining area, but also give it to your loved ones as a gift.
Method 1. From scrap materials - anyone can do it!
The simplest DIY lamp is made from threads. Indeed, with similar design even a child can handle it. So, to make a chandelier from threads, we will need:
- Threads - you can take regular jute twine or thick cotton threads with a total length of at least 100 meters, the color is chosen based on your imagination and the existing interior;
- PVA glue and a brush for applying it;
- Petrolatum;
- 2 balloon– one for work, the second for testing; It is better to take a round ball, not an ordinary one, then the shape of the lamp will be the correct shape.
Advice! A children's or rubber beach ball will also work. For very large lamps will do a fitball ball, for example.
Work on creating a ball of thread is carried out in the following sequence:
- Inflate the balloon to the required size. Do not forget that the resulting lampshade made of threads will repeat the shape of the ball. Using a marker, draw one or two circles at the top and bottom (more at the bottom).
- Pour glue into a container and carefully process the threads. And the ball itself can be coated with Vaseline with a brush.
Advice! You shouldn’t apply glue to all the threads at once - it’s better to move along the winding area.
- Next comes winding the threads around the ball, taking into account the drawn holes - the density of the winding determines how your lampshade will turn out in the end.
- After the ball is wrapped, you need to leave the future chandelier to dry for at least 24 hours.
- The ball bursts and its remains are easily removed from the robust construction. The result was a lampshade made of solid threads.
- A hole is cut at the top to accommodate the cartridge.
- You need to check the strength - another balloon is inserted into the lamp and inflated. This will demonstrate the flexibility of the design.
In this way, you can also create local lighting in the kitchen by creating several lamps from threads with your own hands. Or you can hang it in the dining area, as shown in the photo.
Do not forget that for a ball of thread you can make additional decor in the form of interesting coloring, beads, butterflies or artificial flowers, or you can make a whole bunch of balls of different sizes.
Using the same principle, you can come up with your own unique design lamp For example, from lace, or ceiling lamp as in the photo below.
Method 2. Creating a masterpiece - you need to try!
You can get excellent kitchen lighting if you make your own lamp from beads or fabric. You will get a lamp in style or a real chandelier-chandelier.
For this job you will need:
- An old hoop, garden basket, hanging metal planter, or wire to create a frame;
- Decorative chains;
- Beads, beads, ribbons, strong threads;
- Lamp socket.
The lamp will be a two- or three-level structure of rings located one above the other and connected by chains or wire.
Rings can be taken different sizes, creating a lampshade in the spirit of a vintage classic, or the same - this is exactly the kind of lighting that is performed in.
The base of the lamp is certainly painted, wrapped or decorated, after which they begin to string the beads.
The consumption of beads in this project is as follows:
Bottom part: beads with a diameter of 16 mm, 15 pcs. on a thread;
Upper part: beads with a diameter of 12 mm, 31-32 pcs. on the thread.
Here you can vary the degree of tension and the number of threads.
Advice! The work should be carried out by first hanging the chandelier and inserting a socket into it.
By analogy, you can create a chandelier from artificial fruits for the kitchen. And subdued lighting will be achieved if you use fabric to cover the frame. As a rule, such a lampshade is made for country and country styles.
Method 3. Lamps made from waste materials - for a modern kitchen!
Most original lamp can be made from this waste material, like plastic bottles and disposable spoons - they are beautiful, cheap and environmentally friendly!
We make a lampshade in a minimalist style and - no additional decorations from threads or beads, only matte white or colored plastic. To make such dim kitchen lighting with your own hands, we will need:
- Base made from a 5-liter plastic bottle;
- Cartridge with wire and lamp;
- Glue for high-quality fixation;
- Lots of disposable spoons.
To make a chandelier with your own hands, cut out the bottom of the bottle and cut off the handles of the spoons (not completely, so that a small handle remains). Using glue, fix the cut spoons on the base bottle. They need to be placed evenly, in a row, then the lampshade will look attractive.
Advice! Each next row overlaps, without gaps.
The resulting chandelier will resemble fish scales. However, it should be remembered that this design is quite dense, which means that additional lighting will definitely be needed in the kitchen.
The shape of the lamp can be different, for example, in the shape of a lotus.
You can also make such decorations from disposable spoons.
A lamp made from plastic bottles, or rather from their bottoms, made with your own hands, may seem like lace or consisting of many small flowers.
Advice! Such a lampshade can be made not white, but colored - which means you need to take colored bottles or paint it with paint of the original color: copper, gold, steel, pink, black, etc.
The resulting lampshade can be hung in the kitchen or above the dining table.
Let your kitchen be cozy and bright! We wish you creative success and present some more great ideas for making kitchen lamps with your own hands from improvised materials.
People who have developed creative abilities very often create interior elements with their own hands, and making a master class chandelier is not difficult. Only it is better to buy factory-made lamps for the bathroom, because they must be small and reliable.
Dwellings containing objects self made, acquire a refined and original look.
We make a chandelier with our own hands from plastic bottles
To make a chandelier from plastic bottles we take:
- If you have an old chandelier, you can take its island
- Many colorful bottles
- No more than ten steel rods
- From plastic bottles we use scissors to cut out any figures that you want to see on your chandelier (animals, flowers, etc.)
- We attach several twigs to the chandelier island. From the rest we make something similar to a hedgehog, connecting the rods in the middle. We remove one rod where the light bulb will be
- Next, we supplement the resulting frame with previously cut plastic figures
- We connect the island and the hedgehog together.
Now you know how to make a plastic chandelier with your own hands. To consolidate the material, we recommend that you watch a video that contains examples of chandeliers made from plastic bottles:
Making a chandelier with your own hands from wood
To make a wooden chandelier we will need:
- Twelve strips for door trim, 30-45 cm each.
- Liter jars from which we will make lampshades (6 pieces).
- White and wood-colored paint.
- Self-tapping screws for wood.
- Sandpaper.
- Seaming machine.
Description of the manufacturing principle.
- Making the planks smooth using sandpaper
- We need room for the electrical wire, so we make a notch on the back of each strip.
- We drill three strips to which we will attach the shades.
- We paint the planks a wood color.
- We make a regular hexagon from the plans.
- We attach the cartridge to the hole in the cover.
- We roll up the jars with light bulbs inside.
- We paint the lampshade in any light color.
DIY chandelier made of wood, photo below:
Making a chandelier with your own hands from threads
To make a chandelier from nylon threads we take:
- Let's make a lampshade from a plastic bowl
- Multi-colored threads
- Fastening paste
Description of the manufacturing principle.
- First of all, let's make the paste. Mix half a glass of flour and two glasses of water, two glasses of water with a temperature above 60 degrees, boil and throw in about three tablespoons of sugar. Stir and wait until it cools down. Next, we’ll look at how to make a lampshade with your own hands for a chandelier.
- Throw the yarn into the paste.
- We wind the resulting yarn around a bowl.
- After 24 hours, separate the resulting thread lampshade from the bowl.
- We attach the lampshade to the bottom and that’s it, the chandelier can be hung on the ceiling
Attention! A DIY lampshade for a chandelier requires the use of a light bulb of no more than 60W, as it is made of flammable materials.
Have you decided to change your interior and want something unusual? The store offers a huge selection of different things, but why not make something yourself? The designer lives in each of us, you just need to wake him up, change the world that surrounds you, make it the way you see it!
Why not start with a chandelier? It can become the calling card of your home that no one else has. This will not only save your money but also give you a sea of unforgettable emotions.
Make a chandelier shade with your own hands. You will be surprised that things that you were ready to throw away can be useful to you and reborn in your new invention.
First you need to decide on the style of what kind of chandelier you want.
If you are young - chandelier in romantic style for you, need to decorate country house– country style will be just right.
DIY chandelier (photo based on lampshade decorations)
To make a chandelier with our own hands, we take:
- Light bulb socket.
- Power cord.
- Frame for a chandelier.
- Decor for jewelry.
- Multi-colored threads.
- Hot glue.
- 60 Watt light bulb.
For the frame, what's left of your old, long-forgotten chandelier is suitable. Many famous designers began their illustrious careers by giving old items a shine, bringing them back to life and putting them up for sale.
Take measurements and decide on the fabric you will use. Sewing the cover the right size put on the frame. You can decorate the lampshade however you like. These can be cut out flowers, animals, figures, beads and much more that your imagination can reproduce. We attach a socket equipped with a low-power light bulb to the lampshade and everything is ready. A lampshade made by yourself will lift your spirits every time you look at it.
Making a New Year's chandelier with your own hands
How to make a New Year's chandelier with your own hands to surprise your friends with your suddenly discovered talent?
To make a chandelier we take:
- Organic glass or thin wooden sheet.
- Linen rope.
- Multi-colored balls.
- Small stapler.
- We use glass parts left over from an old chandelier.
Description of the manufacturing principle.
We start by cutting a square from plexiglass, the dimensions of which are 50:50 cm. We make holes every 5 centimeters throughout the entire area, as chaotically as possible. We take a linen thread and thread it through the water hole and out into another, adjacent one. The length of the extended ends should be two meters. We repeat this procedure until we fill all the holes in the square.
We hang this composition instead of a chandelier on the ceiling and continue to decorate the chandelier as christmas tree. We take the balls and tie nylon threads of different lengths to them, and tie them to the structure, concentrating them in the central part. Next, we perform the same operation with glass products, but we hang them at the edges; the length of the thread should be less than on the balls. If you look at the structure as a whole, it will look like an inverted pyramid.
Now you know how to make a New Year's chandelier with your own hands. Start your crafts right now and you won't stop with the chandelier.
IN Lately Decorations for chandeliers such as thread wrapping have become very fashionable.
Description of the manufacturing principle.
We will need a lot of thread and PVA glue, as well as an inflatable ball. Cotton threads are perfect for our project, since the glue applies evenly to them and behaves obediently.
Wrapping inflated balloon threads, apply glue and wait until it dries. Then we simply pop the ball with a needle. Cut a hole on top for the light bulb and you're done. Your result can be compared with the DIY chandelier in the photo.
A chandelier in a room is not only lighting device. Without exaggeration, we can say that it is the main decoration of the room. Handmade items are considered especially valuable. This allows us to highlight the special taste of the owners of the home, as well as their extraordinary and creative mind. Undoubtedly, this type The work is quite complex and requires increased concentration. But at the same time, when creating decorations for your home, you can find many interesting and extraordinary solutions in it!
This article presents some ideas for decorating a chandelier with your own hands, as well as instructions for them. Everything is written so simply and clearly that anyone can do it at home.
In order to make a chandelier, sometimes they use the most unusual materials. For example, everyone is already familiar with glass or wood, plastic, and so on. But sometimes, when you want something completely “unusual,” wooden skewers and glass bottles wine bottles, and cans, and all kinds of tree branches, and cardboard, and even straw. You need to choose depending on the idea of the creator and the wishes of the apartment owners. You also need to take into account the general interior of the room where the finished product is supposed to be placed.
Interesting idea for a chandelier made from plastic spoons
Plastic spoons for disposable meals are one of the simplest and most easily available materials for creating a chandelier for a room. Their advantages are low price, variety color range and will last similar material for quite a long time. To create such an extraordinary chandelier, you will need a minimum of investments, both physical and material.
Materials:
- empty bottle drinking water, volume 5 liters;
- plastic spoons (their number depends on the size of the bottle);
- glue for plastic;
- an old chandelier (or rather, a socket from it);
- sharpened knife.
Process of creation:
- First you need to prepare a plastic bottle for subsequent steps. Remove the label in advance, cut off the bottom, dry well.
- Then you need to remove the plastic spoons from the packaging and carefully cut off the unnecessary handles with a knife, leaving about 2-3 centimeters above the level of the “scoop”.
- You need to glue the scoop blanks to the base of the bottle. Apply a large amount of glue to the remaining “tail” and press it to the surface (with the convex side of the spoon facing out). It is necessary to cover the entire bottle in a circle until the entire perimeter is occupied by plastic “spoons”. It is advisable to arrange them in a checkerboard pattern and slightly move them together. This will leave fewer “free spots”.
- You need to remove the cartridge from the old unnecessary chandelier, and then place it in an already glued and dried bottle and fix it to the frame.
- A decorative bowl can also be made from plastic spoons: “scoops” are glued around the neck of the eggplant.
- Install and connect the chandelier, check its operation.
Note! Possible option decorative painting or painting spoons in absolutely any color. Thus, your product will look even more beautiful and more original!
Chandelier made of plastic bottles in the form of leaves
One more an unusual option The interior will feature a chandelier in the shape of leaves. It is created from simple plastic bottles, the variety of colors of which allows you to work in the most unusual colors and embody the most daring ideas.
Process of creation:
- Cut plastic bottles into blanks shaped like future leaves.
- For each workpiece, the sheet shape is finally fixed.
- Using a soldering iron with a thick tip and a one-sided bevel, you need to slightly fuse the sections of each leaf in order to give the future product the greatest effect.
- In the same way, using a soldering iron, you need to give the workpieces a sheet structure. You need to act extremely carefully and accurately, because you can easily make a hole in the plastic. Such a leaf with outlined veins and slightly fused edges will look complete.
- Using a hot needle, you need to melt several holes at the “leg” of each leaf in order to attach them.
- Using thin wire, form branches and screw them to a steel wire frame.
Also great idea There will be the production of a new chandelier in the form of a lampshade for a floor lamp or a lamp for a table. Thus, it will be a great addition to the previous product!
Chandelier with paper butterflies
The most common product option is a chandelier with butterflies. And this is not without reason. Let's start with the fact that this option looks luxurious and expensive, and secondly, its production does not require any special physical costs. Thus, even a child can participate in creating a chandelier.
Process of creation:
- It is based on either an old chandelier or a similar frame. If you don’t have one, then you can take the simplest wooden or metal rim. If such material is not available, then, as an option, you can take thick wire and make about 2-3 skeins, so that a circle is formed.
- Cut out butterflies from paper according to the template. You need to take the butterfly template and adjust it to the desired size. The option also looks very unusual when butterflies of several sizes are located on the chandelier (again, depending on desire). Transfer the outlines onto paper and carefully cut out, preferably with a sharp stationery knife or small, non-rounded scissors. For the templates themselves, it is better to use a material that is dense, does not become very dirty and does not attract dust. For example, velvet paper is very poorly suited for the product, because in the future you will need to vacuum the chandelier quite often.
- Take a nylon thread or transparent fishing line and attach the butterflies to it. There are two types of fastening: either piercing the bodies of the butterflies, or gluing them with silicone glue.
- Next, we attach the threads with butterflies to the base of the frame and decorate it.
- You can also try interesting option, if you make a wire ball! It should be based on a pendant from a chandelier and placed on it using glue gun several butterfly patterns.
Fabric chandelier
This chandelier is also based on a frame. As in the previous version, either old metal frames or thick wire are suitable for its manufacture.
After you have pre-prepared the base, start cutting out the fabric from which the lampshade will be made in the future. How long will it be ready product, depends on your desire, but it is worth considering that the width of the fabric must be the same as the diameter of the frame! Once you finish the pattern, you need to do a fitting.
Another nuance is that the top of the fabric will need to be sewn directly on the frame, which means that it (the frame) must be solid. Otherwise, if it is possible to thread it directly into the fabric, then you should first fold the top edge of the pattern and stitch it, and then iron it. Then we sew a seam on the side of the product.
To prevent the lampshade from losing its shape, you should pay due attention to the material. If the fabric is too light, “airy,” then the bottom of the product should be weighted. You can use cardboard or fishing line for this.
Carefully sewn fringe, lace or braid will look just as beautiful. But do not “overload” the product! The process of creating a fabric chandelier is similar to making a lace chandelier. So you can safely experiment with the materials that are placed on the frame.
Lamp made of threads and a balloon
Materials:
- dense threads, such as wool, cotton, or jute rope - at least 1 meter;
- cartridge;
- petrolatum;
- PVA glue;
- a brush for applying glue and Vaseline (it is advisable that the brush does not fade);
- 1 or 2 pieces balloons(the first in order to work with it, and the second in order to check the finished product, if desired);
Process of creation:
- Inflate the balloon to a certain size and secure it. Remember that the finished work will exactly follow the outline of the ball! Using a marker, draw a couple of circles at the top and bottom in order to determine the boundaries of thread winding.
- Using a brush, coat the entire perimeter of the ball with Vaseline.
- Pour PVA into a plastic container and thoroughly process the threads with it (It is not advisable to apply glue to the entire length of the threads at once! Process them as you wind them around the ball!).
- Taking into account the boundaries that you drew with a marker, wind the threads around the ball. Do not forget that depending on the density with which you wind, the future appearance products.
- After wrapping, you need to leave the product for a day until it is completely dry; After complete drying, you need to burst the ball and remove it through the holes.
- Cut a spot in the top and insert the cartridge.
- To be completely sure that the product is strong, you can insert a balloon into it and inflate it. In a similar way, you can check the flexibility and reliability of the lampshade.
Alternatively, you can paint the structure with a spray can or acrylic paint, attach all kinds of decorative ornaments, such as butterflies, artificial flowers or beads. Also, a great idea would be to arrange several balls in the form of a bunch of grapes and fasten them together.
Wine bottle chandelier
This version of the chandelier is a little more complicated than the previous ones. Making a chandelier this way is quite difficult; the manufacturing process will require care and attention. However, you will like the result!
Materials:
- wine bottle;
- glass cutter;
- sandpaper for sanding edges;
- cartridge;
- electrical wire;
- metal or wooden frame, rim.
Process of creation:
- First you need to prepare the bottle itself for further manipulations with it. The first step is to draw a straight line around the perimeter at the level you need. This is required in order to cut off the bottom of the bottle using a glass cutter;
- To avoid cutting yourself on the glass, you need to sand the sharp edges with sandpaper;
- Pull the wire through the neck of the bottle and then connect the socket;
- Attach the bottle to the frame.
You can also decorate the bottle with all kinds of decorative items, or leave it in original form. In any case, it will look original and impressive.
The number of products on the frame depends on your desire. You can either leave one bottle or secure four or more bottles at once.
Laserdisc chandelier idea
This idea is great for those who have a large number of laser discs left in the house, but don’t dare throw them away. It’s worth noting right away that manufacturing options and the result can be very different. It all depends on your imagination and creativity!
Materials:
- two round wooden planks of different thicknesses, and which are slightly larger in diameter than the disks;
- racks made of metal or wood;
- Fluorescent Lamp;
- magnetic switch;
- disks.
Process of creation:
- Make a hole in a thicker board and install a starter with a switch in it.
- Then connect it all to the lamp.
- String disks onto the lamp.
- Place the stands around the discs and secure the top.
The finished product will delight its owners for a long time, and it does not require special care. It is not advisable to place this type of chandelier in a child’s room so that the child cannot harm himself (only if the chandelier hangs out of reach).
Shabby chic chandelier
To create spectacular lighting in a room, you can also make a chandelier from fabric or beads. The result will be a kind of candelabra or lampshade in the “shabby chic” style.
Materials:
- a ready-made metal or wooden frame (or it can be made from an old hoop, garden basket, thick wire);
- socket and lamp;
- chains and threads for decoration;
- all kinds of beads and seed beads.
Working on such a lampshade is not difficult, but it is a very painstaking task. Such chandeliers usually consist of two or three levels of rings, which are located on top of each other. It all depends on the size of the chosen bases. If you take rings of the same diameter, the finished product will be made in the “modern” style.
One of important points is that before you start decorating the chandelier you need to paint and wrap the frames with decorative materials!
The approximate consumption of beads is:
- For the lower part of the lampshade - 16 mm beads, about 15-17 pieces per thread;
- For the upper part of the lampshade - 12 mm beads, about 35 pieces per thread.
Naturally, when stringing beads on a thread, you can increase or decrease their number or the degree of thread tension. But it is still advisable to stock up on materials in excess of the norm.
The essence of the work is to hang threads with beads in a “waterfall” or “cascade” so that they flow downward along the structure.
In order to create the effect of “muting” the light, you can sheathe the frame with thick fabric.
A DIY chandelier will definitely add a fresh touch, originality and beauty to your interior. You will immediately notice how the room will sparkle with new colors, and your guests will sincerely admire your creativity, hard work and original taste!
90 photos of DIY chandelier ideas
