Crafts from plastic bottles for home and garden, new photo ideas. Crafts for the New Year from plastic bottles and disposable cups
Hello, dear readers! Did you know that from the simplest plastic bottles Can you make a lot of interesting and useful things yourself? In addition, the recycling of materials is zealously welcomed by environmentalists, so in this way we will “kill” several birds with one stone, create really interesting things, and also save nature (probably everyone knows, according to scientists, that plastic bottles take more than 100 years to decompose). Well, let's move on directly to the practical part...
What to make from plastic bottles
1. Garland
We take a bottle, cut off the bottom, create a hole in the middle of the bottle bottom, so that the garland light bulb fits into it. According to this scheme we prepare required amount“lampshades”, in each of which we attach garland bulbs.
2. Pots
We take the bottle and cut a rectangular hole on one side with a stationery knife. Thus, we prepare the required number of bottle pots, stock up on rope, create punctures on the side of the neck and bottom, into which we thread the rope, secure the rope from below with special clamps - crimps (these can be purchased in handicraft departments or sewing studios) or tie knots. All that remains is to fill the resulting pots with soil and plant flowers.
3. Jewelry stand
We cut off the bottoms of several bottles of different sizes. We drill a hole in the center of the cut bottoms (the hole should correspond to the thickness of the rod). After which we take metal rod and string the bottoms onto it, each of which is secured with nuts set on hot-melt adhesive. Attention: the base of the stand must be stable, so it is better to take a 2 liter bottom. bottles, which we install upside down in the future composition.
4. Flowers from plastic bottles.
The bottles in question make beautiful flowers; you can learn how to make such flowers from the video.
5. Box.
We cut off the bottoms of identical bottles, 6 cm high, and inside sew on the zipper by hand.
6. Curtains made from plastic bottles.
A wonderful decoration country house or street gazebo will serve as such interesting curtains. How to make such curtains, and also consider additional photos Can .
7. Jellyfish.
We cut off the bottom of the bottle and melt it with a lighter or a lit candle. We make a hole in the center of the bottom into which we attach pre-cut strips from the rest of the bottle using hot glue. Finally, the resulting strips can also be melted with a lighter.
8. Bird feeder.
We continue the topic of “using plastic bottles”... Take a bottle and two wooden spoons, make through holes in the bottle corresponding to the thickness of the spoon. We insert spoons into the resulting holes, and from the “spatula” side, a little higher, we create another hole through which the birdseed will pour out. We fix a self-tapping ring in the bottle cap and thread a rope through it.
9. Organizer.
We cut the bottles in half and fasten the blanks to the wall with nails or self-tapping screws.
10. Volumetric printing.
The bottom of a bottle, immersed in paint, can create interesting flower prints, and in this example you can see a magnificent Sakura branch!
11. Boat.
Particularly creative people tried their best and made such an interesting means of transportation on water.
12. Candlesticks and holders.
Cut off the necks of the bottles. We install one part with its neck up, and the other with its neck down, and to keep the structure in place, we install a candle in the stand. Thus, the upper neck will act as a “collector” of drops of the melting candle.
Handmade has always been highly valued. And when simple and unexpected materials are also used, the crafts actually delight others.
We are talking about plastic containers that we throw away every day, without even thinking about how much benefit it can bring.
By showing your imagination, you can make a wide variety of crafts from plastic bottles for your dacha and garden.
Modern summer residents are not averse to showing off decorative statues, or.
You can stand out from the crowd and come up with your own original version.
Popularity of the destination
The main reason for the popularity of this direction of applied art was the simplicity and availability of source materials. After all, to create most products you just need to cut out several figures and paint them with multi-colored paints.
Plastic crafts can act not only as beautiful decorative element garden, but also have practical significance, for example, serving as containers for flowers, fencing, and so on.
For the manufacture of simple homemade products you can even involve all your loved ones to enjoy some quality family time. Together you can make funny little animals, butterflies, flowers and flower beds, palm trees and much more.
Craft options
To make your area more attractive, you can come up with various garden decorations, for example, beautiful and bright butterflies. You will need a clean plastic bottle (the capacity depends on the size of the butterfly), stained glass paints, wire and scissors.
After cutting off the neck of the bottle, fix it and carefully draw a sketch of a butterfly on the plastic. Then decorate it however you like. When the paint is dry, cut it out and bend it lightly along the contour of the body. Now, using a few beads and wire, make the body of a butterfly. This decoration is ideal not only for the garden, but also as a refrigerator magnet.
Gardeners often make something as extravagant as palm trees from plastic bottles. Moreover, they all turn out to be original and different from each other.
Quirky cheerful palm trees They will bring a little exoticism to any area, even the most inconspicuous.
To make such a palm tree, you will need bottles of green and brown colors, from which it is necessary to first cut off the bottoms. The trunk will be formed from brown bottles, and the top is green.
For a palm tree to look beautiful and organic, it needs to make at least eight leaves. It is not necessary to make such a craft according to any template; you can experiment and come up with something of your own. Believe me, not only you, but also your neighbors and passers-by will be pleased with the result.
A pressing problem in the country is furniture. Therefore, we suggest you make something like this ottoman made from empty plastic containers.
It's very easy to make. Secure two-liter bottles together using double-sided tape. At the same time, make sure that their lids are tightly closed. It's better to put them on glue. Place thick cardboard or plywood on the bottoms of the container and cover it all with a cover. This is such a simple and very light ottoman.
Bottles are also widely used in the garden.. They are used to make garbage scoops, drainpipes, buckets for watering plants, used as protection against rodents and insects, etc.
What else useful can be made from plastic bottles is a washbasin. By the way, for this it is better to use containers with a larger capacity - from 2 to 10 liters. You can also arrange a kind of shower.
To please your children, make different animals, for example, pigs, hedgehogs, frogs, etc.
A separate category in this direction is considered. The simplest of them can be made by cutting off the neck of a bottle and decorating it to your liking. You can work a little and make pots of unusual shapes.
Speaking about how to make a craft from a plastic bottle, it should be mentioned that the material must be carefully processed before production. Containers must be clean and dry. They must be covered with some kind of protective agent(paint or varnish) so that the plastic does not crack if there is a sudden change in temperature.
They will look very original on your site. There are no special templates here either. The easiest way is to cut out a flower with petals of any shape from a bottle and decorate it with bright colors.
This flower will look great among the green spaces of the lawn or evergreen bushes. For more complex variations, you will need various decorations, paper layouts and other devices.
But still, from all of the above garden crafts sculptures and statues are real works of art. To create them, you need boundless imagination and considerable knowledge in applied art. However, the result will exceed all expectations.
We are sure that you will be able to make many different crafts for your dacha. And remember, a plastic bottle is indispensable assistant an economic gardener who does not want to spend a lot of money on every little thing that he can easily make himself.
Plastic bottles - inexpensive material, moreover, easily accessible. In addition to their main purpose, they can perform many other functions. For example, you can make real masterpieces - DIY crafts from plastic bottles. Moreover, they will serve for a very long time; during the creative process they can be easily bent or cut. The main thing that is needed to make crafts from plastic bottles is to prepare free containers.
You probably have a question: what can be made from a plastic bottle? Most interesting options are described below.
Making a plastic palm tree
The scheme for creating a palm tree is similar to creating various trees made of plastic. You need bottles, scissors, and paint.
For the palm tree you will need the middle and lower parts of a dark container color.
Insert the same part into the lower part (with the bottom) until you get the desired height. String the parts onto a wire passing through the neck, and attach the green neck to the top of the tree - without a bottom. After this, cut identical green strips and tilt them down.
If you make several of these palm trees, your Agrosad will be one of the most unique, and made with your own hands!
Butterflies
Crafts made from plastic bottles will look very original and decorate any gazebo.
To make such a masterpiece of art, the middle part of the bottle is cut out. First, a blank is made from cardboard - butterfly wings. Then you simply apply them to the plastic to cut out the desired shape along the edges. The wire is attached along the bend line. And the “butterfly body” itself is decorated with beads different sizes. Paint the wings of your butterfly with absolutely any colors of acrylic paints.
Such flower beds can be seen not only on summer cottages. They are also made within the city, near high-rise buildings and private houses.
Bottles are selected identical in shape, size and color. If desired and possible, you can decorate them as soon as you want. Next, create a flowerbed fence by digging the bottles to a certain depth.
Flower pots
Among other things, bottles can be used to make flower pots. Cut the bottom of the container and get a flowerpot cylindrical. Using the top of the container, create a cone-shaped plant pot. In addition, the resulting pots can be decorated using corrugated paper, fabric, yarn or decorated with paints.
Beforehand or during the work process, you can slightly warm up the plastic. So you can create any shape for it.
What else can you make from a plastic bottle?
DIY gazebo for the dacha
Creating a gazebo from plastic containers is not that difficult, for which you need a lot of material and original thinking.
To make your structure more reliable, fill the bottles with earth/sand. To make a frame, there is no need to overload it at all. And to decorate the sides of the gazebo, you can use different fabrics.
Plastic curtains are an original decoration!
This solution is interesting and original. In addition, you can always see all the new items in our DIY garden crafts! You can use curtains on a doorway/window. It is necessary to prepare a large amount of material. Everything here is individual and depends on the size of the window/doorway.
For people with imagination and skillful hands, it will not be difficult to turn unnecessary things into real masterpieces. Masters and beginners use crafts from plastic bottles for the interior, as garden decor and in the form practical furniture. Colored caps from plastic bottles – excellent material For mosaic panels on walls and fences. Best ideas With detailed instructions and the photo can be easily implemented at the dacha, turning a bare area into a “clearing of fairy tales”, and filling the house with useful little things.
Important advantages of crafts made from plastic containers
A well-made souvenir or trinket will eventually develop into a hobby, if there are no limits to your imagination. Summer residents who have moved from simple fences on wire to buildings that delight in scale never cease to amaze.
From available material that many throw away, someone builds:
- greenhouse;
- carport;
- Summer shower or a bathhouse;
- country toilet or a shed;
- summer gazebo or sun visor;
- mansion for children or playground;
- sandbox with decorative sides;
- various temporary buildings on the site.
The main advantage of such structures is available material. At reliable fastening elements of the building walls are aesthetically pleasing and quite reliable. It all depends on the way the plastic bottles are connected. If you approach the matter thoroughly, the desired result will impress even experienced builders.
Over time, plastic becomes a real environmental disaster - it is difficult to recycle. But once you involve everyone who cares in cleaning the area, there will be a whole mountain of empty PET bottles for building a greenhouse, cascading flower bed or vertical gardening. The only drawback is the long collection of identical containers, since the containers are produced different color and volume.
Some manage to collect enough craft material in one season, while others involve neighbors and friends in collecting plastic. Someone decides to clear the area for picnics in order to improve the environment on the way to the dacha and collect material. As a result, the plastic bottles are in use and the area is clean.
Another advantage is that plastic containers are soft and pliable, easy to cut, no need to complex instruments. With little skill, the material itself “dictates” ideas.
For creating original decoration required:
- interesting idea;
- ready-made role model (illustration);
- material for crafts with tools;
- step by step guide training plan.
In the hands of a true master, plastic bottles take on a second life, becoming functional objects. It is better to make souvenirs on a seasonal basis. For example, New Year's toys they make crafts in the winter, practical country houses in the summer, and in spring and autumn all that remains is to build a “clearing of fairy tales” near the house for the children.
Recycling plastic containers is a fun activity for the family. It is easy to attract children to him by entrusting him with a simple part of the work. Don’t forget to remind them that you’re not just making a firebird or “Chunga-Changa island” with palm trees from bottles, but that you care about the environment. You can involve a yard or a school classroom in beautifying the area.
Furniture and interior items made from plastic bottles
Furniture made from plastic bottles looks like a masterpiece that is not accessible to everyone. They will require a lot of plastic containers of the same type. Sofas and poufs impress with their design and comfort, not inferior to real furniture. There is nothing complicated if the sofa is made in blocks - seat, back, sides. If the container is not enough, the sofa blocks can be made one at a time. It’s better when you collect bottles from one drink, for example, two-liter kvass or lemonade.
The principle of “assembling” furniture from bottles is simple - they are placed in layers and tightly wrapped with tape. To make the furniture softer and more springy, a little air is released from each bottle and twisted tightly. At the place where the cap is, cut out a cap from another bottle and tape it with tape. It turns out to be a block with a bottom on both sides - this is the basis of the furniture.
Then it all depends on your imagination, the type of furniture and the number of bottles available. We wrapped 7 containers of the same volume with tape to create the base for an ottoman. What its appearance and style will be depends on the master. For soft seat You will need a round pillow or a block of foam rubber to fit the top. The cover is cut to the size of the ottoman in the form of a cylinder, and it is convenient to insert a zipper along the side seams, but it is easier to sew the upholstery tightly.
If there is not enough furniture for the summer, an ottoman for the cottage is made from an old wadded blanket and a baby pillow, wrapped in a block of bottles. Old curtains or a bedspread will be used for the lining. If the pouf should have a presentable appearance, choose newer and more expensive fabric or eco-leather.
For construction coffee table you will need 4 racks of plastic bottles and plywood board as a table top that can be hidden with a long tablecloth. They do it in a similar way convenient stand for a laptop or a remote table for the garden. For large furniture(sofa, chaise lounge or chair) from plastic bottles, you will need a lot of patience and source material.
Useful little things for the home from plastic bottles
Flowers and vases
Decorating a schoolchild's bedroom or children's room with crafts from plastic containers is not difficult. You can build a whole bouquet of artificial flowers. Place the resulting chrysanthemums, daisies or roses in a vase made of the same material, adding LED light bulbs to the middle insulated wire. This is what a night light of extraordinary beauty will look like, where the faint light shimmers in the plastic petals.
Advice: To give the leaves a special shape, use heating the blanks and folding the corners with tongs!
To place a homemade bouquet you will need a suitable vessel; simply cutting off part of the bottle is not aesthetically pleasing. The edges of the cut are marked with a ruler to make the cut, securing the result by heating the bends. Small transparent bottle cut off to the very top; cut off about half of a large container. We choose a material with a ribbed or “waist” in the middle to create an interesting base.
Then we do it as our imagination allows, but we bend the edges beautifully. The fringed cut is obtained from vertical or diagonal cuts in the plastic base. The resulting strips are evenly folded to the outside.
Note! It is important that all the notches and the depth of the slot are absolutely identical, then the entire product will come out neat.
Depending on which edge is desired, the strips of the vase (the edges of any other product) are secured in different ways:
- curly bend;
- staplers;
- fusing;
- gluing with transparent polymers.
Flowerpots, flower pots and containers for seedlings
Colored plastic containers in the form of bottles and bottles of different sizes are suitable as containers for growing live plants. It is very easy to make a fragrant balcony from 3-liter tanks - a cascade of hanging petunias. Fragrant flowers hanging from cut containers will help make your dream of a beautiful piece of paradise come true.
Large bottles and tanks cut in half are hung with the bottom down and the lid. It is recommended to place large pebbles at the bottom for drainage. Excess water after watering will go to the plants in the lower rows. In the same containers, plants are grown without soil - hydroponic method with the addition of fertilizers. Fresh greens and seedlings (in urban and country conditions) are also germinated in prepared plastic bottles.
Advice: Take advantage of the compact form and ability to hang containers for vertical gardening with automatic watering. In the absence of the owners, watering cans with water immersed in the ground will cope with moistening the plants.
Traps and feeders
Using plastic bottles you can repel pests or attract birds to your site. For this purpose, the tank is used as a feeder, and at the roots fruit trees place traps from bottles of chemicals. From double plastic containers, craftsmen build traps for wasps, where they fly into sweet water and cannot get back out.
Equipment for a summer cottage
At the dacha a quick fix» It’s easy to make crafts from plastic bottles in the form of an impromptu washbasin by hanging a full bottle upside down. Just unscrew the lid a little and a small stream of water will help you wash your face and hands. It is also worth making a bench and organizing lighting with beautiful owls or plastic gnomes. Any garden decor for inspiration - with interesting illustrations.
Multifunctional items for the home
Make an original cosmetic bag from 2 bottoms of plastic bottles, sewing the edges together with a zipper. This box can be used as a multifunctional item - a piggy bank, a case for large beads, hairpins or jewelry.
It is convenient to knit from such a ball, suspended somewhere nearby, by pulling the thread from the ball inserted inside. It’s easier to find nail polish or a collection of lipsticks in a makeshift zippered box.
New Year's decor
Bright New Year's balls, garlands or toys made from plastic bottles are a worthy use for transparent containers. One bottle, cut into round strips, will produce a transparent ball. After securing the sphere with a stapler, decorate it in any way:
- “rain” winding;
- pasting with crushed polystyrene foam (snow);
- decoration with sequins, beads and stones.
New Year's decor made from white plastic bottles with a waist is suitable for snowmen or penguins. You can use black nail polish to draw eyes and other elements, cotton wool (snowball), glitter, small buttons, beads and whatever is at hand. Funny caps for characters - from colored socks without a pair, strips of knitwear are used as a scarf.
Advice: From homemade winter characters, a candle, ready-made tinsel and a couple of pine branches with cones, create an original New Year's composition so as not to buy a Christmas tree.
Curtains made of colored plastic caps and bottles
Space zoning is popular design technique, where a do-it-yourself translucent curtain is often used. Original curtain can decorate any living space, cottage or covered terrace. Original hanging partitions made from unusual materials are widely used in the interior.
IN modern decor Plastic is in demand, including bottles and bottle caps. There are options for curtains:
- from scraps from the bottoms of small containers - strips on a thick fishing line, swaying with the movement of air;
- from colored lids - a fantasy panel of tightly strung elements;
- a garland of plastic and lights to give the LED curtain more aesthetics.
Original all-season flower beds
The summer season is passing, and living flower beds are being replaced by homemade plastic flowers that are no less beautiful than real ones. Their advantage is the ability to decorate the territory at any time. These flower beds pale against the background of living plants, but in early spring And late autumn only they attract admiring glances.
For daisies you will need small ones plastic containers white(petals), yellow (centers) and green (leaves). You will also need an awl and a candle (for heating), “liquid nails,” scissors and stiff wire in green insulation.
We cut the base of the white bottle to the center, marking 16 segments - these are the petals. We bend the neat edges over the candle flame, and also make 2-3 chamomile corollas, which we connect in the center with an awl. Here the stem with leaves is fixed on a green wire, closing with the middle. We fill the center of the flower with a yellow basket with small cuts from 2 finely dissected circles with a fringe bent over the candle. We supplement the flower with green sepals from the bottom, collect all the parts and fix them together.
From the remaining pieces of green plastic, cut out leaves with a hole at the base (for stringing) and give them the desired shape, heating them over a candle flame. We attach the leaves to the wire handle; they should bend around it slightly. All that remains is for the chamomile to make several “companions” and find a worthy place for the bouquet.
Using samples and imagination, it’s easy to make plastic lilies of the valley, roses, chrysanthemums or tulips. This requires plastic. suitable color, from which several layers of petals are made to achieve a resemblance to real flowers.
All-season flower beds include mosaic compositions made from containers filled with earth. Made from lids wall panels. "Butterfly" or " ladybug» – in different versions.
Crafts from plastic bottles for the playground
An incredibly beautiful bird with plastic plumage – a whole “clearing of fairy tales”. These are the peacock or firebird, swans, pigeons, bullfinches and parrots. All of them are made from empty PET bottles according to the general principle:
- Design an aesthetic bird's head with eyes and beak;
- Construct the torso and neck;
- String plastic plumage;
- Provide with wings and tail;
- Place on paws or secure to selected surface.
Plastic swans can be fenced off by a blue “lake” of upside down plastic bottles. Outlandish birds will decorate the trees in the corner of the garden, which is reserved for children's games. You can choose a themed decor, for example, a desert island with palm trees and parrots.
Plastic animals, birds and insects, familiar to our latitudes, as well as favorite fairy-tale characters, are supplemented with other materials. Tires, wood and empty containers that can be easily painted will be used.
How to make decorations from plastic bottles for the cottage and garden
Original garden decor made from scrap material is another way to give the site some personality while the young plants come into their own. From green plastic bottles it is easy to make funny little frogs on the edge of the pond, watching dragonflies and butterflies from the same material.
Palm trees are a popular garden decoration, consisting of trunks (up to 15 brown bottles) and palm leaves (green plastic 5-10 pieces). This is a simple process that even children willingly participate in.
Prepared brown cups with notches are strung on a thick steel rod (bamboo fishing rod), after first piercing the base. It is better to use brown containers (1.5-2 l) entirely, cutting them in half, then you only have to punch through the bottom.
We leave the green bottles without a bottom and neck, with the exception of the last one with a neck, which will be needed as a loop. We cut these containers lengthwise into 3 parts up to the loop and dissect them like leaves. If longer leaves are required, staple the second half of the leaf. All parts of the stem are strung on the base and attached to the top, connecting with a common loop. All that remains is to reliably install “exotic guests” with a lush crown on the site.
The material is collected throughout the year, but it’s easier to involve neighbors and acquaintances in the “ecological” cleaning project. There are special containers for plastic in the yards - it’s much easier to collect.
Preparation for work - removing labels and glue residues from plastic bottles; it is important to rinse well and discard the deformed material.
If vertical fences are built, they need to be filled. Depending on the idea, sand, stone chips or dry soil are poured into PET bottles, burying them 1/3 of the way down.
For selected purposes, plastics of varying elasticity are used. Heat treatment required for filigree work (flowers). It is important not to overheat the fragments cut into strips.
Fairy-tale characters sometimes require additional painting. For example, it is better to cover pink piglets for a playground with an aerosol from a spray can and secure them with transparent acrylic paint.
Plastic bottles are an excellent material for in capable hands. Using them as a basis, it's easy to teach children a lesson environmental education and fill the house or plot practical things. At creative approach The color, volume and shape of plastic bottles themselves will prompt new ideas for an exciting creative process.
69 photos of ideas for crafts made from plastic bottles
If we talk about those whose inodes are not measurable, it turns out that the average value of a plastic flap is only 10-15 units. Prote, the term of complete disintegration in nature for about 300 years. Why is it important? It is necessary to recognize to what extent, after we have suffered from “sickness,” nature maintains a natural balance. 
In order to “brighten up” such a significant difference in terms of waste and recycling, we can give “friend of life” to the same vikoristan plastic dances. This article is very clear about what can be made from empty, viscous, plastic balls.
How to make a plastic stamp for painting
Here it’s important to defy the guy’s imagination. If you have one, then your plastic dance can become a brown painting tool.
How to make a toy from a plastic dance
You can shorten the toy by removing a piece of plastic from the middle, and then glue the top and bottom together, decorating the toy that came out.
How to make a spoon from a plastic dance
This version of a plastic bowl will be useful for you on a hike or for a picnic, if you don’t have a spoon and you don’t have a plastic bowl.
How to make a plastic dance case
It is quite practical to remove the plastic flap when it is added to the case, where you can save various brown particles. The lock can be glued or sewn in, but it depends on what is simpler and more reliable for you.
How to make a grinder for a kvitnik from a plastic dance
How can we manage without plastic dances at the dacha? There is a stink here and there is space for planting and material for greenhouses and dust for the city. Add water through the neck of the bowl, which will then create a hole in its walls.
How to make a year anniversary from a plastic bowl - dispenser
With two plastic bottles you can make a one-year-old dispenser for home medicine.
How to make money from plastic broom dances
You can make a broom from plastic dances. For this, we place the bodies of the dances one on top of another, without leaves in the cabbage, and then we secure them behind all the same elements in the form of plastic dances. Don’t forget about the handle and the broom is ready.
How to make a closure from a plastic flap onto a polyethylene bag
The neck and stopper from the plastic cap can be removed as a dispenser-lock, together with a polyethylene bag. We pull the edges of the bag into the neck and twist the lid. If necessary, twist and dispense the hot product through the neck of the large bowl.
How to make a scoop from a plastic dance
If you have vikoristan dances made of thick plastic, then with a little imagination and intelligence, you can create a nasty scoop.
How to make money from a plastic dance using your phone
A practical product - in the morning you can get out of the plastic flap as you cut it in relation to the photo below.
How to make a lamp from a plastic bowl and plastic, disposable spoons
An unusual lamp can come out of a plastic cap and disposable tableware(spoon).
