How to store a wristwatch? Workshop - shelf for watches DIY watch holder
Metal was chosen as the material for the stand (can also be made of wood or plastic). Once upon a time the occasion turned up aluminum panel from musical equipment. The aluminum plate originally contained drilled holes for screws and speakers, which made it much easier further work. All that remains is to correctly mark the fragments of the stand and cut them according to the marks aluminum plate. Armed with a hacksaw, I got to work.
We mark with a scriber (pointed metal rod) fragments of future cutting.
We saw the fragments of the stand according to the markings.
The sawn fragments of the stand subsequently had to be adjusted with a file, since the dimensions and radii of the hole in the two halves were not identical to each other. The two halves were aligned and fastened with screws for ease of filing. To avoid damaging your hands when handling metal parts, the parts should be fixed in a vice or use bench pliers. After adjusting the dimensions, burrs and chamfers were removed, as well as to preserve aesthetics metal structure corners are rounded. For fastening together, two hexagonal through posts were used (used for fastening printed circuit boards to housings on electrical equipment) and countersunk screws. The hexagonal stands had to be cut to the width of the watch case so that they would be in a stable position on the stand.
We align the two blanks evenly in relation to each other and secure them together with screws. Then we fix the two halves in a vice and process them with a file.
After bringing the blanks to the desired state, we assemble the stand (later the usual screws were replaced with screws with a countersunk head).
After assembling all the parts, we could have stopped there, but it seemed to me that the watch had an unfinished look. The black dial and frame of the watch did not go well with the golden plating of aluminum. To solve this “compatibility”, you can resort to painting or completely cover the holes and bolt heads with overlays. At home I found scraps of thick black leatherette. After transferring the outline of the stand onto a piece of leatherette, two overlays for the stand were cut out. Using double-sided tape, the cut out overlays were tentatively glued onto the surface of the stand. If you don’t have a clear idea of how a stand with overlays will look, then I advise you to do just that, use double-sided tape, if you are satisfied with the result, then you can safely use glue.
We transfer the outline of the stand to reverse side leatherette and cut out the overlays along the outlined line.
After the clock took its place on the stand, the aviation clock began to look like a mantelpiece and became even more attractive. The work done can be divided into two stages: manufacturing and decoration. You can entrust the making of the necessary stand to suit your needs to your husband or son, and leave the decoration to your wife and daughter. When working together, it develops creative thinking and the ability to do something with your own hands. After all, there are times when not everything can be bought in a store, but you can make almost anything yourself! The main thing is to use your imagination and think everything through!
About the Author:
Greetings, dear readers! My name is Maxim. I am convinced that almost everything can be done at home with your own hands, I am sure that everyone can do it! IN free time I love making things and creating something new for myself and my loved ones. You will learn about this and much more in my articles!
You can always buy a nice jewelry box, but if you have a ton of bracelets, trinkets, and beads, then DIY jewelry organizers are the answer to that ever-growing question of where to put it all. There are various homemade organizers for which you need tools and those where they are not needed at all, but your imagination is required. We guarantee that in our small selection you will find organizers for every taste.
2. Showcase made of drawers
You don't have to be a carpenter to make a simple display case out of drawers. Use thread spools, plugs or door handles as hangers.
4. Cornice and hooks
Buy a curtain rod (for a curtain, shower, or closet) and finials.
7. Multi organizer
You may want to combine several organizers to accommodate all types of jewelry.
8. Door handles for necklaces
Simply attach the door/drawer handles to the painted board. Glue on a piece of driftwood to create a rustic or beach-inspired decoration.
9. Bathroom equipment
It's hard to believe, but this is actually a holder toilet paper and a towel rack. Very skillful!
10. Pins and hooks
Such an organizer is easy to make, even if you have not made items yourself before.
12. Showcase made of canvas for cross stitch
You can purchase plastic cross stitch canvas at any DIY store or online. Place it in a frame and you will have a ready-made homemade jewelry organizer.
13. Showcase made from a tree branch
Use a branch from your garden or one you found while walking around the area. You can also paint it. Small wire mesh Great for use, because with it you don’t have to think long about which earrings to choose.
16. Box frame with wire
Made from a box frame, mounting loops and wire.
17. Recycled chicken wire
Suitable for those who want to make a hanging jewelry organizer.
18. Cornice with pins
Original idea. This is a piece of curly wooden cornice with painted pins.
19. Homemade jewelry organizer from a technological pipe
It looks very masculine, at least until you put some jewelry on it.
23. Simple homemade jewelry organizer
This small project will help you gain first experience in making items with your own hands. These are pins, hooks and ropes.
24. Organizers made from silverware dividers
Another way to use silverware dividers.
25. Flower basket display
A great idea that shows you how to use an item you wouldn't even think of.
26. Great jewelry organizer
Made from paper roll. You can also make a special section for storing earrings.
28. Shelf organizer
With the help of hooks, the shelf can become a very convenient homemade jewelry organizer.
31. An easy way to organize your jewelry
Attach the branch to the wall if you don't want to put it in a vase/bottle.
35. Reuse the drawer
You don't have to be a carpenter to decorate. old box.
36. Beer bottle bracelet stand
A good idea for those who have a lot of bracelets.
38. Beautiful organizer for jewelry
Very original. This is a stencil on the wall with nails placed in the right places.
39. Branch hanger
Another simple but practical homemade jewelry organizer.
40. Wonderful grater
From the kitchen to the bedroom!
41. Organizer for jewelry from hangers
Simply attach the hooks to wooden hangers and hang your decorations.
42. Cork organizer
Fill the frame with corks, add some hooks and you're done.
Have these ideas inspired you to make your own jewelry organizer?
When buying an expensive watch, you immediately need to look for an additional accessory to go with it. A watch stand will be required for proper storage.
Species
The holder keeps the watch intact, allows it to easily take the desired shape and not be scratched. As a rule, they are divided into several types:
- the box is shaped like a box. It fits many accessories, and to prevent damage to the watch, there is a separate compartment for them. There are boxes with an additional invisible compartment in which you can easily hide accessories dear to your heart;
- a special hanger is attached to the base, and on the handles themselves there is a clock. It can be hung on the wall or simply left on the table. The use of the hanger is universal and is suitable for storing not only watches, but also bracelets, hairpins and jewelry;
- stand – strengthening, which is located only on the table. It consists of rounded elongated bars and can easily accommodate a whole collection of chronometers. As a rule, the stand is covered with velvet - this allows you to fix accessories and maintain their integrity. But it is recommended to additionally glue the bars so that they do not fall from the holder;
- multi-tiered stand has various shapes: round, square, elongated or arched. Each tier is located slightly higher than the other and has its own functions. The first one stores rings, earrings, small brooches, the second one stores pendants and necklaces, and the third one stores watches;
- sculpture holder is a decorative addition with versatile functions. May be in the form of a statue, building or glass form glasses There are special handles or recesses where you can hang or put your watch.
Color design
The holders are made of glass and metal, which is why neutral and calm shades are used, for example, gray, black and white. Watch owners prefer glass holders and forms without unnecessary details - they easily fit into any interior and room design. When choosing a stand you need to pay attention to:
- color. It must match the interior. For the Provence style, cream shades and a slightly aged design are suitable. But if the room design is in modern or high-tech style, it is better to purchase glass holders without unnecessary additions;
- form. It can be anything from round to abstract. The most stable are square tabletop and hanging specimens;
- additions– handles, fastenings, accessories. They are required for storing jewelry and watches. The stand is considered ideal if there are replaceable parts, then they can be easily replaced;
- material. The choice is quite large - glass, metal, wood, plastic. In terms of quality and durability, wood and metal are considered the best.
How to make it yourself
For any watch, even a self-winding one, you can make a stand yourself. All you need is a little inspiration, a set of tools and a desire to create.
Made of wood
Refers to decorative appearance holders and decorates any interior. You will need:
- tree branches of different lengths(moderate hardness and elasticity);
- varnish;
- small brush;
- fast-drying adhesive;
- wire;
- sandpaper;
- knife;
- several hooks(needed to secure the holder to the wall).
- At the first stage it is necessary to prepare wooden branches– peel them from the bark with a knife, process top layer sandpaper to make it soft and uniform. After this you need to let them dry.
- The second stage is the formation of the skeleton future stand: twigs should be attached to the base (it should be straight, without unevenness) at a distance of 3 to 5 cm from each other. You need to apply glue to the places where they adhere and press each part tightly. It is better to use clothespins for this. Waiting time for drying is 3 hours.
- At the third stage, varnish treatment is required– use a brush to paint the entire surface of the decorative holder in several layers and let dry.
- The last stage is securing the branches with wire(covering several layers of base) and adding hooks for hanging on the wall.
Such a holder will not only please the eye and make the room more comfortable, but will also hold watches, hairpins, bracelets and brooches.
Retro style
If you have several bottles, a wooden box lying around the house, or a large number of old unnecessary things, then they can easily be used to create decorative masterpieces. Materials can be recycled and create a space in a romantic, Provençal, bohemian or even Scandinavian style. What is needed:
- two small glass bottles ;
- wooden box (should be one third higher than the bottles);
- varnish;
- glue;
- black paint;
- tassel;
- hooks or loops for fixing the shelf on the wall.
The box needs to be processed, clear away debris . Then decorate with patterns or special designations on the outside. To do this, use black paint and a small brush. Cover it with varnish and leave to dry for 2-3 hours. Make two holes on one side - a rope will be threaded through them. Next, place the bottle on the glue inside. It is advisable to place them close to each other so that there is free space. While the glue dries, you can place the beautiful holder on the wall.
Comfort and coziness in our home sometimes depends on even the smallest details and elements. Even most interior designers agree that the most important attributes to obtain comfort in the house, use well-chosen curtains, original lamps, soft and selected in the right shade, blankets, pillows, bath mats and watches.
This article will focus on a master class on how to decorate a clock at home yourself.
There are a large number of photos of watches on the Internet, most of them are made by famous designers, but to make original watch At home it’s also not difficult.
There is, of course, one key and difficult point - installing a mechanism on the watch for its operation, but a ready-made mechanism should be bought in a store and installed according to the instructions. But appearance future watches and its other design completely depends on personal preferences and tastes.
There are several modern techniques that help you make your own watches in any style.
Clock style decoupage
This technique of designing and creating a wall clock involves working with a ready-made store template, which already has a blank, the base of the hands and the finished mechanism. You can also purchase ready-made patterns on papers, special paints, glue and other decoupage elements.
The preparation for the watch is done in this way: the base is covered several times with soil from acrylic paints, and finally polished. The desired shade and texture are given to the base in the next step.
There is one trick - if you want to make a watch in the old style with a tint that represents scuffs, then the paint must be applied with a sponge.
Decorate wall clock DIY is a process of bringing out the imagination and creativity from a person. Special water stickers can be applied to the base. Or you can draw a preliminary sketch yourself and transfer it to the dial.
Afterwards, the finished mechanism and arrows with numbers are attached. After a series of actions, the clock you created with your own hands will come to life and give your home a special, original look.
Quilling style watch
Quilling is an arts and crafts process that involves working with straight strips of colored paper of varying widths. Such strips, as a rule, are twisted and glued to the surface, thereby creating the most varied designs and pictures.
To create a watch using this technique, it is best to take wood as the base of the watch, since quilling elements can be glued to it well.
The color scheme should be in harmony with the interior of the room. After all, a bright clock will look ugly in a room designed in a minimalist style. Therefore, the choice of shade is key point in this matter.
Most often, multi-colored quilling elements are used to create flowers, insects, trees, animals, berries, and so on.
Plaster clock
Regular plaster tiles will serve well as a base for future watches.
Romantic and reverent natures will definitely find a large number of solutions for creating watches from this material.
Among professionals, such a tile is called a medallion. The mechanism of the future watch is attached to its back. To make the product look more elegant and discreet, its surface should be covered. matte paint light colors.
And, if you want some highlights, then glossy paint will do.
Pay attention!
This material is most suitable for creating a clock for the bedroom. At the same time, shades are chosen - beige, soft pink, pearl, coffee with milk, purple, and so on.
Clock using wooden sticks
In this situation, your arsenal should include items such as sticks and quality wood, good glue, scissors, and a ready-made working clock with a flat surface.
You should cut out many small sticks of the same size from wood, and then connect them
If the sticks are applied to the base in two layers, you can achieve a wonderful “explosion” effect, which looks luxurious and original.
Now you know how to make a clock at home. Watch self made Ideal for the kitchen, living room, and bedroom.
Pay attention!
DIY watch photo
Pay attention!
This organizer is convenient for storing beads, pendants, and chains.
You will need:
4 cork boards;
Stencils, paint and sponge or brush;
Pins, nails or hooks;
Wall mounting.
Sequence of work:
1. Using stencils and paint, apply the design to the boards.
2. Wait for the paint to dry and stick pins, nails or screw hooks into the boards. All that remains is to fix the organizers on the wall and hang the decorations.
Photo and source: katelynbrooke.com
2. Organizer box for watches and bracelets
A good way to organize bracelets and watches and store them away from light and dust.
You will need:
Several rolls of paper towels;
Beautiful napkins (for example, for decoupage), wrapping paper or wallpaper scraps;
Scissors;
A box with a lid of a suitable size.
Sequence of work:
1. Clean the bushings from any remaining towels, lubricate them with glue and cover them with napkins or paper, wrapping the ends of the paper inside the bushings.
2. Place the resulting holders in a box. Ready!
Photo and source: onceuponherdream.blogspot.com
3. Door handle organizer
A very original and convenient model - door handles of different colors act as holders!
You will need:
Board or plywood;
Fabric for tight fitting;
Rope for fastening the fabric (you can also glue the fabric or use a furniture stapler);
A variety of door handles (it’s best to go to a furniture store and buy 1-2 pieces different sizes and forms);
Sequence of work:
1. Distribute the pens on the board. Mark their mounting locations and drill holes.
2. Cover the board with fabric, securing it in a way convenient for you. Then secure the handles to the board. Ready!
Photo and source: lizmariegalvanblog.blogspot.com
4. Organizer from trays for cutlery
Such trays are usually placed in kitchen drawer to store cutlery in them. However, with their help you can make convenient organizer shelves for storing jewelry and small items.
You will need:
2 or 3 trays for cutlery (in this case, wooden);
Spray paint;
Decoration paper and glue;
Adhesive hooks;
Wall mounts.
Sequence of work:
1. Paint the trays with spray paint. Some parts of future organizers can be covered with patterned paper.
2. Wait for the glue and paint to dry and attach the hooks. All that remains is to attach the organizers to the wall.
Photo and source: tatertotsandjello.com
5. “Jewelry Tree”
Not just a stand for jewelry, but an art object! And it's done in a matter of minutes.
You will need:
Several dry branches;
Optional paint.
Sequence of work:
1. Clean the branches from the bark and (if you want) cover with paint.
2. When the paint is dry, place the branches in a vase and hang the decorations.
Photo and source: mysocalledcraftylife.com
6. Lace organizer
Copper accessories and specially distressed lace make this organizer look like something found in grandma's chest or found at a flea market. It is convenient to store everything that has hooks on it: earrings, brooches, badges.
You will need:
Strip of wide cotton lace;
A pair of copper-look metal holders;
A piece of cardboard;
A couple of tea bags for coloring lace.
Sequence of work:
1. If you want to age white lace, dip it in tea infusion. Then rinse and dry.
2. Cut a piece of cardboard with a width equal to the width of the holders and glue it to the lace, as shown in the photo.
3. Tie the lace into a ring, thread it through the holder and secure the holder to the strip of lace.
4. Use the second holder to decorate the bottom edge of the organizer. All you have to do is hang it on the wall - and you're done.
Photo and source: forthemakers.com
7. Ombre hanger organizer
It turns out at the same time a hanger for beads and chains, a shelf for small items, and an original piece of interior decor.
You will need:
Bar with rectangular cross-section for the base of the shelf;
A stick for hooks and a jigsaw to cut them;
Sandpaper;
Durable glue;
Paint (color for shelf, color for hooks + white);
Brush or sponge + containers for mixing paints.
Sequence of work:
1. Prepare pieces of stick for hooks: saw them off, sand the edges.
