How to make a decoration for a floor vase. DIY floor vase: secrets, techniques and unexpected solutions. DIY wooden floor vases
Vases are used not only as containers for flowers, but also as a decorative element in the interior of a house, yard, and even garden plot. You can use them most in different ways: place fresh flowers or ikebana, fold knitting or fill with original stones. But in any case, this item should look decent, so we offer you a master class on decorating a vase with your own hands.
DIY vase decor with twine
One of the most simple ways, which does not require a lot of money and time, is decorating with twine.
All you need is to choose a vase of an interesting shape and wrap it around it, starting from the bottom. We attach the beginning and end of the twine string with glue. You can also periodically peck the thread as you wind, but don’t be overzealous, otherwise the glue will be visible. When winding, we try to tighten the twine to ensure a tight fit to the surface.
If desired, you can decorate the vase additional elements in the form of flowers, bows or leaves.
Master class on decorating a vase with semolina
Even in childhood, in school lessons, we were taught to decorate all kinds of jars with semolina, seeds, coffee beans, etc. Unfortunately, such lessons no longer exist. But we will remember our childhood and modernize this type of decoration a little.
1) If possible, choose a jar with a high neck, this will make it easier to decorate it with ribbon. We also need a tube of PVA glue with a narrow dispenser. And, in fact, the semolina itself is in the plate.
2) We estimate an approximate pattern and apply part of it to the jar with glue. By the way, the pattern can be either free or thematic, in the form of hearts, animals, inscriptions or names.
3) Sprinkle a strip of glue with semolina, don’t skimp on the grains, the more the better. Everything unnecessary will fall off on its own.
4) Literally after a few seconds, turn the jar over a plate with semolina and shake it off. At the same time, we don’t touch with our hands; what fell was supposed to fall.
5) Using the same technology, we perform the remaining pattern. It takes about 12 hours for the glue to dry, after which, for reliability, you can coat the pattern with aerosol varnish. And again leave for 12 hours.
6) After complete drying, you can add additional decorative elements. Decorate the neck with a ribbon, and cover the vase itself with beads or rhinestones. Result in the photo:
All! The cute vase is ready. The most for a long time will be spent waiting for the glue and varnish to dry, but you will spend nothing on the work.
DIY vase decor (floor)
It is very interesting to decorate and floor vases.
This work is done from simple wooden blocks glued together with wood glue.
From glass
If you have an old yellowed glass vase somewhere, then you can also revive it and use it for your pleasure. Such “rarities” are suitable for decoration with sealant and paints. Before starting work, the surface of the vase must be thoroughly cleaned of dirt and degreased. Then a pattern of sealant is carefully applied to the surface.
The sealant dries for at least 24 hours. After it has completely dried, apply the first layer of paint with the effect of frozen glass (sold in handicraft stores) from an aerosol can to the vase.
After a couple of hours, you can apply 1-2 layers of regular white paint.
From seeds
There are many more materials that can be used to decorate flower vases. For example, from seeds.
Today, only the lazy do not improve the design of their home. Fashion trends allow us to satisfy the most sophisticated tastes of demanding consumers. At the same time, the demand for decoration remained at all times. interior design tall floor vases. However, their price availability does not always coincide with what is desired. appearance. Like any other thing, you can make a floor vase with your own hands. Such a beauty will have the desired shape and the desired shape. color scheme, and much cheaper than their store-bought counterparts.
Materials for work:
Glass jar with a capacity of 3 liters – 2 pcs.;
Tea saucer – 1 pc.;
Plastic container for preserves – 1 pc.;
Silicone sealant – 1 bottle;
Liquid PVA glue (construction) – 1 liter;
Building alabaster – 4 tbsp;
Potato starch – 100 gr.;
Egg racks – 4 pcs.;
Vegetable oil – 1 tbsp;
Vaseline – 1 tbsp;
Three-layer napkins – 2 pcs.;
Plasticine – 1 box;
Old tube of PVA glue with a narrow spout – 1 pc.;
Liquid nails glue, white and gold paints, blush, eye shadow, face powder, brush, clear acrylic varnish, water.
Stages of work:
First stage: forming the basis.
We turn one jar upside down and glue “ liquid nails» a tea saucer turned upside down towards him.
We glue the bottom of the second can to the bottom of the same jar.
Cut off the bottom of the preserve container. We glue the inverted container to the neck of the second can.
Let the base dry for 1 day.
Second stage: give the vase the outline of a vessel.
Finely chop the egg racks.
Fill with water so that the entire torn mass is immersed in it. Leave it overnight.
Wring out the soaked grates.
We tear large pieces. Fill the entire mass with PVA glue.
Mix the soaked grates thoroughly until a homogeneous slurry is obtained.
Fill the space between the neck of the jar and the container with egg mixture.
Apply a thin layer of egg mixture over the entire surface of the jars.
Let the base dry for 2 days.
We paint it white.
Third stage: apply a three-dimensional drawing.
Print out the stencil you like.
We make cuts along the contours, cutting out the necessary moments.
We place the drawing on the vessel in a checkerboard pattern, upright and inverted (2 times at the top, 2 times at the bottom; top and bottom facing each other).
Use a pencil to draw voids and slits.
Squeeze the silicone sealant into an empty PVA tube.
We put a sharp spout on the tube and squeeze out the sealant along the contour of the pattern.
If necessary, make adjustments with a toothpick.
Let the sealant dry for 1 day.
Apply blush tint to the drawing using superficial movements with a large brush.
Fourth stage: make a silicone mold.
Mix potato starch and silicone sealant.
Knead thoroughly until a dough-like mass is obtained.
We heavily coat the surface of the figurine blank (in this case, a magnet) with Vaseline.
Press the dough face down into the flattened dough.
Carefully prying the knife out, remove the workpiece.
Fifth stage: casting the figures.
Grease the inside of the silicone mold with vegetable oil (pour it in, then turn the mold over and pour out the oil).
Pour a tablespoon of alabaster (or plaster) into the container.
Add a spoonful of water there and mix. If the solution turns out thick, add water.
Fill the silicone mold with alabaster solution.
Leave the solution to harden (you can check readiness by pressing your nail on the figure - no mark should remain on the surface). We pry the figure with a knife and remove it from the mold.
Repeat preparing the solution and pouring 3 more times.
Stage six: painting the angels.
We paint the blanks with white gouache.
We matte the bodies of the angels with face powder.
We dye our hair.
Drawing sponges.
Using a pen we draw the eyelids and eyebrows.
Use white gouache to cover the extra layer of powder (next to the bodies of the angels).
We draw the wings in gold.
We apply “liquid nails” to the back surface of the figures and glue them to the vase.
Seventh stage: making roses.
Knead the plasticine, lay it on a hard surface with a thin plate, and cut it into squares. In each square we make cuts in a circle from the center.
Gently prying up the central core, twist the spiral, moving from the center to the edge. We bend the square corners like large leaves.
We paint roses white.
We tint them with blush to match the color of the three-dimensional pattern.
We apply gilding along the edges.
Using “liquid nails” we attach the roses to the vase.
They have long been used to decorate living rooms, hallways and bedrooms. They easily fit into almost every interior and are a spectacular room decor. The vase may have a strict laconic design or, on the contrary, be decorated with rich stucco and gilding, have different shapes and heights. On this moment the assortment of stores offers a huge number of vases from famous decorators and ordinary brands, so choose the desired model won't be difficult. But if you want something original with an unusual designer decor, then it is better to make a floor vase with your own hands. This way you can bring your own ideas to life and not waste precious time searching for the desired product in stores.
Making a floor vase with your own hands
The basis for crafts can be plastic and glass bottles, newspapers, metal pipes and old unnecessary vases. Here the method of using thick cardboard will be clearly demonstrated. So, to make a vase you will need the following tools and materials:
- cardboard tube, thick sheets;
- a piece of fiberboard;
- felt-tip pen or pencil;
- scissors and PVA glue;
- newspapers;
- sandpaper;
- putty.
A DIY floor vase will be made in several stages:
- Cut the cardboard tube to required length and glue it to the fiberboard base.
- Make preparations. The shape of your future will depend on the shape of the blanks. Please note that the more parts there are, the easier it will be to work on the product in the future. Optimal quantity blanks 25-30 pieces.
- Glue the cut pieces around the perimeter of the pipe. For fastening you will need a special thermo glue gun with silicone rods (“hot glue”).
- Using newspapers and PVA glue, glue the resulting base. Leave the product near the radiator for several days so that the glue has time to dry.
- Primer. Dilute the putty with PVA glue and coat the product with the resulting mixture. Leave the fake for a day so that the papier-mâché has time to set. When the surface becomes hard, sand it with sandpaper. Continue this procedure until the workpiece becomes smooth and even.
- Decor. The most interesting stage of the work. The patterns are molded from ceraplast, salt dough or plastic and glued to the surface of the vase with glue. To make small ornaments, you need to use paper napkins cut and rolled into threads. You can twist petals, spirals and wavy lines from damp tissue threads. After all decorative elements have dried, cover the surface with PVA glue diluted with water.
- Painting. Apply acrylic varnish to the entire surface of the vase. Some elements can be shaded with gold (it can be sprayed from spray cans).
As a result, you will get a luxurious floor vase that will be difficult to distinguish from a store-bought one. To make its design even more interesting, you can use craquelure, bitumen or special designs for decoupage. If you want to get an unusual relief surface, then walk over the selected area with glue and fill this place small grains(millet, peas), decorative beads or seed beads.
Please note that you cannot pour liquid into such a vase or store fresh flowers. Better to use artificial plants or tree branches.
Beautiful DIY floor vases: manufacturing methods
Do not think that a vase can only be made from thick paper. Here you can use boxes, bottles, newspaper tubes, plastic cans. You can decorate the product with threads, wire, shells and even pistachio shells. Looks very elegant and creative!
Nothing will decorate a table better than a bouquet of flowers in a beautiful vase, and tall floor vases will also fit perfectly into any interior. But connoisseurs of beauty and regulars of decor and gift stores know that beautiful vases are quite expensive, and not everyone can afford to buy one. However, such beauty can be achieved thanks to your hands, available tools and a few tips that we will give you in this article. We will tell you how to decorate a vase with your own hands.
Decorating a vase with your own hands is very exciting and creative process, which will be real entertainment for you and your family. There are many ways to decorate a vase with your own hands, starting with glass painting and ending with the popular Lately decoupage.
Painting a vase with your own hands is certainly beautiful, each vase will look expensive and unique, however, not all people can boast of artistic talent. Without one, you risk simply ruining the vase.
The same situation is with decoupage. Decoupage is a design and decoration technique that has its own nuances and characteristics. That is why we advise you to first “train on cats”, or rather on bottles or cans, and only then, having some practical experience, move on to decoupage of vases.
In this article we will tell you about the most simple and quick ways decorating vases with your own hands.
Decorate a vase using a glue gunTo do this, we need a special glue gun that “shoots” hot glue.
DIY vase design using the quilling technique
Quilling is the art of decorating with paper. This technique is often used to create vintage shabi chic pieces. For this we need the vase itself, craft or parchment paper, and PVA glue.
Making a vase with your own hands using sheet music or old newspapers
We will need a regular one glass vase, PVA glue, old sheet music or newspapers, brushes and varnish.
Vase decorated with artificial flowers
As we see, decorative vases Doing it yourself is not as difficult as it seems. At the same time, there are a huge number of design methods - it all depends on your imagination. We told you only about some of them. Vases can also be decorated with lace, threads, buttons, beads and beads, simply by pasting them over the vase. One of the simplest ways to decorate vases is also to decorate them with gift or colored paper, self-adhesive wallpaper and rag or knitted covers.
Below in the gallery we have presented you with some more beautiful and simple ideas decorating a vase with your own hands. Get inspired and create with us!
Reading time ≈ 11 minutes
Making a vase from scrap materials with your own hands is great way pass the time with benefit and pleasure. So you can give a second life unnecessary things, get an original thing for your home and transform it. Let's look at several simple master classes on making vases from tin cans available on the farm, glass bottles and vessels, other containers.
Examples of vases with your own hands.
Decoration materials
In the master classes offered below self-production The vases will use materials that you are likely to find at home, and only a small part of them may have to be purchased. Of course, we are talking about decorating a finished waterproof vessel, since making a vase yourself from scratch will be an impossible task for most.
You may also be interested in:
You can use many materials to decorate a vase:
- textiles of all types, textures, colors, including ribbons, yarn, ropes, burlap;
- buttons, beads, beads, sequins;
- colored (printed) tape;
- enamel painting, glitter;
- coffee beans, cereals, seeds, coarse salt;
- natural plant materials: twigs, chestnuts, acorns, leaves;
- sea shells, natural pebbles;
- kraft paper, cardboard;
- clothespins;
- coins.
Materials for needlework.
For fastening, it is best to use transparent glue, which when dried does not give a tint and does not stain the materials. And as a base, a great variety of containers that do not allow water to pass through are suitable:
If you are not going to place fresh cut flowers in a vase in water, then the product can be made of water-permeable material (cardboard base, for example a reel or reel).
Cardboard bobbins.
Vase made from a jar and twigs
To create a vase you will need materials that you can probably find at home:
- glass jar with a volume of 0.5, 1 or 1.5 l;
- twine or thin rope;
- a small piece of burlap;
- chopped twigs of small diameter (about 0.5 cm);
- glue.
Tip: the glass jar can be replaced with any other cylindrical container.
Step-by-step production of a vase from twigs.
Step-by-step production:
- Cut the collected branches with a hacksaw into pieces of equal length. They should be similar to the height of the glass container.
- Using twine, secure the branches at the top and bottom ends, tying the twine into knots. As a result, you should end up with a kind of canvas of twigs.
- A piece of burlap, equal in length to the circumference of the jar, needs to be wound around the vessel, the upper ends wrapped inside the jar and glued. The neat bottom can be left free.
- Next, a web of twigs needs to be wrapped around the container and tied into knots.
Alternatively, you can not use burlap, but plant the branches directly on the jar with glue. Finally, it is advisable to fasten the structure with a rope wrapped around the can in several turns. The product will look just as decorative and aesthetically pleasing as the version with burlap.
If you use thicker pieces rather than thin branches, the vase will turn out to be a rougher design, but no less original:
Another product option.
When using jute
This master class also requires the use of a glass jar or bottle. You will also need:
- glue;
- twine, jute or other beautiful rope, thick rope will also work.
Twine decor.
Manufacturing step by step:
As a result of the work done, you will get such a laconic and effective do-it-yourself vase using improvised materials:
Ready product.
With a fairly impressive size of the vessel, the vase can be used as a floor vase.
Vase made from a painted bottle
This master class is also very simple and will take you no more than half an hour. Necessary materials:
- glass bottle for any liquid (mineral water, champagne, dairy products);
- universal spray paint in the desired color.
Painted bottles.
Step by step process:
- Wash the bottle inside and out, remove all labels and traces of glue.
- Place the bottle on a metal or wooden rod and turn it over - this will act as a kind of support.
- Now the container can be painted. It is advisable to use paint in a can for an even and uniform layer without smears.
To get a geometric or any other pattern, first cut out strips (other shapes) from adhesive tape and stick them on the container before painting.
For a more festive and elegant look, you can use glitter of an adjacent shade. With the help of paints and sparkles you can create very impressive ensembles.
Decor with sparkles.
You can cover not the entire vessel with glitter, but only part of it:
Partial decor.
There is another option for painting the bottle - from the inside. To do this, you can use paint in cans. You will also need a metal baking tray and a mesh. The bottles need to be prepared, then pour a small amount of paint inside and carefully distribute it over all the walls, turning the bottle over. To dry, the vessel must be turned upside down and left for a day.
Painting the inside of bottles.
Vase made of clothespins and tin
The following vase is suitable for a miniature bouquet of delicate flowers. To make it you will need a tin can and a set of clothespins.
Tip: to make the vase neat, it is important to use a small jar, the walls of which can be completely hidden under the clothespins.
- Clean the jar of dirt and remove the label.
- Place the clothespins tightly onto the sides of the jar. For reliability, you can use glue. To make a vase, we recommend purchasing a set of plain wooden clothespins – they look as aesthetically pleasing as possible.
Manufacturing process.
The finished vase can be decorated with cutouts or stickers. In fact, it’s not really a vase, but rather a . Inside such a stand you can place a glass glass with a bouquet.
Finished vase.
Vase for artists
You can make the following creative vase in 20 minutes, the main thing is to have all the necessary materials on hand:
- any cylindrical container that does not allow water to pass through;
- strong glue;
- packaging of pencils/markers/brushes.
Decor and pencils.
The photo shows that to make a vase, the container must be carefully and tightly covered with pencils. For beautiful view It is advisable to use a pack of new pencils of the same length. The finished product can be tied with a decorative ribbon.
If you use brushes, the vase will look like this:
Tassel decor.
Using fabric
To create the next vase we will use a simple set of materials and tools:
- glass container (preferably glass, as it looks beautifully from under the areas not covered with fabric);
- a small piece of fabric (you can use several harmoniously combined colors, plain fabrics can be supplemented with printed ones);
- glue;
- scissors;
- for decoration: twine, buttons, beads, ribbons, lace, etc.
Idea: Instead of buying new fabric, it is better to look for unwanted pieces among your needlework materials, and also go through old, unworn items. They will look the cutest and most tender natural materials: linen, cotton, natural lace.
Necessary materials.
Step-by-step manufacturing process:
On next photo Another version of this technique is presented:
burlap decor.
Knitted texture
For this next super-simple tutorial, you'll need some scrap knitted items or yarn and knitting needles (if you're good at knitting), as well as a vessel. The point is to make a kind of cover for the container. To do this, you can cut off a sleeve from an unnecessary knitted item if its diameter matches the vessel. One edge needs to be carefully folded and placed on the container - voila, the decor is ready! If you know how to knit, then an original cover can be made in the evening. To avoid seams, it is better to knit on four needles.
Knitted cover for a vase.
By the way, using the same principle, covers are made for stationery stands, candlesticks, cups and thermoses, and even furniture.
Variations of covers.
Mini vase made from a light bulb
The next vase made from an incandescent light bulb is small in size, so it is suitable for placing a small bouquet or a single color. However, if you put together an ensemble of several “vases”, you will get a very impressive picture.
Vase made from a light bulb.
For manufacturing, prepare the following materials and tools:
- several burnt out or new light bulbs;
- twine or thin braid;
- pliers;
Step-by-step production:
- Use a sharp knife to pry off the soldered part (insulation).
- Next, you need to remove all the “stuffing” from the light bulb: the plug, the electrodes, the thread. It is important not to damage the base.
- Next, you need to wind twine around the base and make a small loop - our vase cannot stand, so it will have to be hung.
Manufacturing process.
At this point the product is ready! All that remains is to manipulate the remaining light bulbs and make a set.
Ready product.
An ensemble located on a tree of branches will look very original:
An ensemble of vases made of light bulbs.
Ensemble
This composition looks very festive, elegant, gentle and at the same time, you will have to spend very little time to create it. The main thing is to choose containers that are identical in size and design. It is not advisable to fasten them with glue - this way, if necessary, you can disassemble the ensemble. A much more practical and elegant option would be a beautiful satin or grosgrain ribbon with several turns, tied in a bow. If the containers have a narrow neck, you can only fit one flower into each one.
An ensemble of containers.
Putty decor
Finally, we’ll tell you how to decorate a vessel with putty and paint. If you have some putty left after the renovation, this option is just for you!
What you will need:
- glass vessel of any shape and size;
- putty;
- acrylic paints and varnish (paints should be in contrasting shades);
- floral mesh;
- sponge, fine-grained sandpaper and a small spatula.
Putty decor.
Step-by-step production:
Video: DIY putty vase.
