≡× MENU

• Interior
• Window
• Walls
• Projects
• The buildings

Do-it-yourself artificial fire and decorative firewood for a fireplace with lighting. Decorative firewood for the fireplace, creating a full aura of comfort Decorative firewood for the fireplace

The dance of the flame fascinates with the changing dynamics of its bends. The pagan ideas of distant ancestors rise within us as forgotten memories. Ancestors who considered Fire a majestic god. And, despite the fact that we have domesticated and tamed this formidable natural phenomenon, the greatness of Fire makes us admire it again and again.

How pleasant it is in the evening in the twilight to immerse yourself in the contemplation of the flames, to feel the slightly bitter aroma of burning logs. But even the owners of private houses do not always decide to tear down walls, rearrange the attic and roof in order to install a real fireplace. And this is only the first half of the matter. During operation, it is necessary to prepare firewood, remove ash, clean the chimney... And all these efforts are aimed at for the most part only to create an atmosphere, because heating houses today is much more practical and less labor- and material-intensive.

And the atmosphere of a house with a fireplace can be completely recreated by an imitation of a flame. In this article we will talk specifically about, that is, safe methods without an open large flame, in contrast to biofireplaces, which are also successfully used to decorate rooms, but have real fire.

"Fireplace: imitation of flames with steam

In the video you can see the flame created by the steam.

This method is the most difficult of the above; it requires the skills of an electrician and special components. Here they are:

1. Fan 90 mm;
2. DMX controller Velleman K8062;
3. DMX decoder BESTEN DMX Decoder 350;
4. LED RGB luminaire MD-9P;
5. 3 Chinese ultrasonic generator fog

Some concert devices, as well as steam electric fireplaces, are made using this principle. The imitation using cold illuminated steam is practically indistinguishable from the real dance of fire. And the cost of our assembly is an order of magnitude lower than the cost of a finished electric fireplace. If you decide to use this method, keep in mind that the structure will be built into a false fireplace, which means that adequate space must be provided.
Assembly diagram:
We pre-install at the bottom of the container under water assembled generator fog. The generator is equipped with a membrane, which, vibrating at an ultrasonic frequency, creates a reduced pressure above itself (almost a vacuum). Under such conditions, water evaporates at room temperature. The cold steam rises upward with a fan, where it is illuminated by LED lamps.

The diaphragm is installed on top. According to Bernoulli's law, the speed of air movement near a hole increases the more, the smaller the hole in it, which makes the “flame” more realistic. You can also try different diameters aperture to achieve maximum similarity.

See the video below for assembling the steam flame simulator. One of the steam generators in this build has its own lights, so you'll see the light at the very bottom. Fortunately, this lighting does not affect the “flame” in any way.

"Theatrical" fire

As the name suggests, this method is used in theatrical productions, design of performances and other things. But we will use it to simulate a flame.

So, we need:

1. Large fan (preferably quiet)
2. Three halogen lamps with reflectors
3. Three color filters (orange, red and blue)
4. A piece of white light silk
5. Bowl or box for making the base of our flame

Simulation assembly:

We install a fan at the bottom of the box or bowl and take the cord out.

We install halogen lamps above it on one axis so that they shine upward. We attach colored filters above them at a distance of about 2 cm. Red and orange are at the edges, blue is above the middle lamp. This touch will give our flame greater relief and brightness.

Cut pieces from a piece of fabric different sizes. It is desirable that these are triangles of irregular shape. This will make the flame more realistic.

We secure the flaps in a bowl or box around the fan. That's it, our fire is ready!

We plug the device into an outlet. The flaps of fabric, under the influence of the fan, instantly rise up and flutter, the backlight creates a semblance of yellow - orange flame. Glares of light scatter across the ceiling and walls, reminiscent of the reflections of natural fire.

Candle fireplace

One of the most simple ways imitation of a fireplace flame, which has already become almost a traditional and favorite design solution.

Its advantages are ease of execution and a real fire, for which, unlike a wood-burning hearth, there is no need to prepare fuel. The downside is that the candles smoke.

To create a candle composition, several candles of different or the same size are used. The choice of shape and color depends on the style of the room and the wishes of the owner. In order to greatly enhance the effect of a small candle composition, use mirrors. They are lined with them inner part fireplace Mirrors installed at an angle to each other create multiple reflections.

Fireplace: imitation of flames using Christmas tree garlands

Another fairly common way to create an imitation of fire. Here I will tell you how to make an imitation of a wood-burning hearth.

We will need:

1. Branches of the right size
2. Lace (can be not new, cut from old clothes)
3. Aluminium foil
4. Several stones
5. Christmas tree electric garland in yellow, orange or red colors.

We wrap branches without gaps in foil. This is necessary so that the lace does not subsequently stick to the branches.

Carefully coat the lace with glue and wrap it around the prepared branches in foil. Leave until completely dry (about a day).

Carefully cut the lace case along the branch and remove the blanks.

We lay out a circle of stones at the location where the hearth is installed. We place the garland in the middle, leaving the cord and plug outside.

We install our “lace” firewood into something like a fire. You can add a few stones for the composition. Our hearth is ready. We plug the garland into a socket and admire our imitation.

Advice : The flame will look more natural if the garland flickers.

Imitation with salt lamps

Not the most spectacular, but the most useful imitation. A salt lamp is a lamp whose lampshade is made from a single, unprocessed salt crystal. Inside the lamp is a regular light bulb. When heated, the crystal emits negative ions, which are so beneficial for our body. They bind harmful positive ions emitted household appliances, neutralize tobacco smoke, their influence has a beneficial effect on the atmosphere of the house and the well-being of the residents. In addition, pinkish Pakistani salt crystals, illuminated from the inside, resemble warm small lights or large hot coals, and, folded into a whimsical composition, will create an original lighting in your fireplace.

These are the simple ways to decorate your home, make it cozier and more original.

Imitating fire is a creation artificial flame in a false fireplace. Many apartment dwellers dream of making a mesmerizing fireplace.

You can even do it yourself.

There are several ways to create an artificial imitation of fire:

• Using a liquid crystal screen.
• Simulation using .
• Illusion effect.
• Cold fire using a fan.
• Using water vapor.

Fire using LCD screen

You will need a TV screen, LCD is better screen. You need to choose a TV for a raised fireplace so that the screen fits inside the fireplace. After this, you need to find a video recording with the effect of a burning flame and record it on the TV, for this, in it must have a USB input.

Of course, imitation fire will turn out beautiful. But the effects from the screen will not be very realistic. You can fix this yourself.

Simulating fire using holograms

You will need a hologram with flame elements. What is the essence of this method:

• A flat picture of the flame appears to the eye in three-dimensional format. Such holograms are created using special technologies.
• We place the hologram in such a way that the edges of the picture are not visible from a distance.
• We select special lighting. We use LED bulbs or halogen bulbs. Then we place the light bulbs in the electric fireplace on opposite sides of the hologram.

Thus, from a flat drawing we get a three-dimensional image. The flames will appear real in an electric fireplace. You will feel the depth of the image, its volume. LED backlight creates an optical illusion. From a small painting you get an image that will seem many times larger.

Illusion effect

The essence of this effect is as follows: we take several mirrors and place them at different distances from each other. In this case, the angles between the mirrors should be different meaning. Then we take the virtual image of a flame and place it in a false fireplace.

Read also: How to make a beautiful corner fireplace from plasterboard

Need to do special lighting using LED bulbs. The effect will be as follows: the mirrors will reflect the image underneath different angles, in the electric fireplace there are logs and flying sparks of flame will appear voluminous. The picture becomes realistic.

Cold fire with a fan

This method is very simple to implement. You will need the following materials:

• cardboard or tin box;
• patchwork fabric;
• fan;
• three LED lights: red, yellow, blue;
• three small mirrors;
• optical filters of three colors: red, yellow, blue.

On cardboard box We place the fan so that the air blows out of it upward. After this, we install three LED bulbs in the corners of the box. We also install optical filters next to the LED light bulbs, and install mirrors on the sides of the box.

From the flap we cut out shapes in the form of different triangles sizes and glue it to the box. After this we place ready product into a false fireplace, and connect it to the network. At the same time, we observe how the flames burn brightly.

Fire using water vapor

We will need:

• three ultrasonic fog generators;
• container for liquid;
• distilled water;
• cardboard container;
• lighting from RGB lamps;
• fan.

We take a cardboard container and place three ultrasonic fog generators on the bottom of the box. We attach the fan to a cardboard box. Pour distilled water into a special container for liquid and place it on the generator. The generator will generate fog. Special lighting from RGB lamps gives the effect of a burning flame. The picture seems realistic. Of course, this effect is more expensive, but effective. Artificial fire using water vapor is of higher quality.

Artificial firewood for a false fireplace

When you have an electric fireplace in your room that heats the room, you need to choose heat-resistant firewood. For this you can buy ceramic firewood, they are more expensive, but the look it will be very beautiful. Especially when using LED backlighting.

This is the fire I had assembled on the table:

You will need:
1) Chinese fogger from air humidifiers.
2) PC power supply
3) PC cooler
4) Halogen lamp 12 Volt red
5) Epoxy resin(a lot of)
6) Silicone (any cheap one, plenty)
7) 220 Volt halogen lamps (Flickering like a candle. Sold in stores.)

So.... I promised my daughter a "fireplace" under New Year.... Closer to the point, I discovered that the fireboxes available for sale are either not even close to realistic, or cost incredible amounts of money (2 thousand euros and more). I decided to do it myself..

The “fire” itself, after much experimentation, was made from (on Ali Express it costs about $3.5). I didn’t take pictures of that process, but it’s simple - I did it metal container, secured the fogger and cooler, in the top cover there was a slot for the “steam” to escape.

Here's the diagram:

As is clear from the diagram, the fog formed by the fogger accumulates in a container above the water. The cooler pumps air and the mist escapes into a slot in the top cover. At the same time, it is illuminated by a halogen lamp in orange-red color. It turns out to be "fire". And above, the fog condenses, and since the lamp does not illuminate there, it turns out “smoke”... It is important that the structure is tightly covered with the top cover. Because fog is heavier than air, and if it has a “loophole”, it will pour out anywhere but up. I did this: I covered the edges of the resulting container with a thick layer of silicone, and applied the smeared liquid soap(so as not to stick), a piece of laminate and let it dry. I got a perfectly even elastic band around the edge. The top cover, made of a two-millimeter steel sheet and painted with nitro paint, fits tightly onto it.

After that, I started making the “fire” itself. I collected coals from extinct fires in the forest and coated them with construction silicone.

After drying, I removed the silicone molds and poured epoxy into them, which I had previously tinted red. (Since it itself is yellow, it turned out orange). After removing the mold, I sharpened the burnt logs, and then poured epoxy into the mold and inserted them back. I took out the finished “coals” and tinted them black matte paint from a can.

That's all, actually.... I placed 220 Volt neon lamps on the top cover. (They flicker), after which he built a “bonfire”. Powered everything except the neon lights from computer unit power supply - lying around, as it has unstable voltage. And for my needs - just right. From it I got 24 Volts for the fogger, 12 for the cooler and halogen.

All. All that remains is to build it all into the fireplace portal. (I'll talk about this later)

What is imitation fire is the creation of an artificial flame in a false fireplace. Many apartment residents dream of making a fireplace with a mesmerizing picture of fire. Many people like to watch the flames. At the same time, not everyone can place a real hearth at home with a real fire and firewood. Nowadays, there is a way out; it’s quite possible to make a false fireplace yourself, just prepare: drywall (gypsum plasterboard), tools, good mood. However, when the installation of the frame is completed, the question arises of how to imitate a real flame in a fake fireplace.

Imitation of fire in a fireplace: design options

Decorative home hearths made of gypsum plasterboard require compliance with fire safety standards, since such a design is designed exclusively for artificial fire.

There are several ways to create an artificial imitation of fire

Most often, masters use the following types simulated fire:

1. Use of steam.
2. Creation of "theater fire".
3. Use of salt lamps.
4. Installation in the TV hearth.

Most the hard way creating a decorative flame - steam. Not everyone can create such an imitation, because it will require a specific set of components and special equipment, as well as skills in working with electronics.

To make a fire of this kind, you need to prepare:

1. DMX controller.
2. Fan with a diameter of 9 cm.
3. LED RGB lamp.
4. DMX decoder.
5. 3 ultrasonic fog generators.

These devices must be selected according to the parameters of the built fireplace, the layout, as well as the manufacturer and characteristics. It all depends on what initial result the master wants to get. All these devices are included in steam electric fireplaces, as well as concert electrical devices that create the effect of steam.

If the devices are connected correctly, it is possible to make an imitation using a cold glow system, which makes it possible to make a fire simulator that is difficult to distinguish from a real hearth.

If the master wants to use exactly this method of simulating a flame, it is important to provide the necessary parameters for the components and mount the fireplace of the required size.

The operating principle of such an electric fireplace looks like this:

1. A fog generator should be placed at the bottom of the container into which water is previously poured.
2. The generator has a membrane that creates vibrations at a specific ultrasonic frequency, providing reduced pressure. Therefore, it turns out, one might say, a vacuum and the water evaporates at room temperature.
3. Thanks to this, the steam rises.
4. The top is illuminated with an LED lamp.
5. A diaphragm is installed above the structure.

Assembly using technology will make it possible to create a more natural imitation of flame yourself in a false fireplace. The second way is the theatrical option. As is already clear, this method is used in theatrical circles to various kinds productions However, it is also suitable for making a dummy, imitation of fire.

To make such an imitation yourself, you need to prepare the following items:

1. A piece of light white silk fabric.
2. 3 halogen lamps with reflectors.
3. Silent, powerful fan.
4. 3 filters: red, orange and blue.
5. A box or a special bowl for assembling a false structure.

When everything is prepared, you can begin assembly according to the following scheme. A fan should be installed at the bottom of the box or bowl. The cord must be routed out. Next, you need to attach halogen lamps to one axis so that the light is directed upward. Then, at a distance of 20 mm above the lamps, you need to install light filters.

From the prepared material it is necessary to cut shreds of various sizes, preferably triangular shape, as they will be more realistic.

The next step is to attach the flaps to the box, bowl along the edges of the fan. When the fan is turned on, a fire that is not real, but very similar to a natural one, will appear in the fireplace. This method is quite simple and makes it possible to create an almost real, mesmerizing flame in the fireplace.

Artificial fire for the fireplace: salt lamp

The use of salt lamps in artificial fireplaces to recreate a decorative flame is beneficial and is considered effective way. A salt lamp is a special lighting device whose lampshade is made of untouched salt crystal. In the inner part of such a lampshade there is a regular light bulb.

The use of salt lamps in decorative fireplaces to create an artificial flame is considered the most useful and effective way

When the lamp is connected, the lampshade begins to heat up and release negative ions into the air.

They bind positive ions (from household appliances), which have a detrimental effect on human health, thereby helping to improve the well-being of the residents of the house. The disadvantages of this method include the rather high price of salt lamps, and the advantages: realism, aesthetics and ease of installation.

By using lampshades of various colors, it is possible to effectively and very simply create a non-natural flame in your fireplace yourself. In addition, by using several lamps of different sizes at once, it is possible to create an imitation of a fire.

DIY fireplace replica: TV instead of a fireplace

Another easy way to create a non-natural flame in a fireplace is to use a flat-panel LCD TV. But this method is considered the most expensive, since such equipment is expensive. Special LCD TVs have been developed that are produced specifically for artificial fireplaces.

You need to choose a TV for a false fireplace so that the screen fits inside the fireplace. After that, find a video with the effect of a burning flame and record it on the TV, for this it must have USB

They contain video footage of:

• Playing tongues of flame;
• With smoldering coals;
• With a bright fire.

This recording goes on in the hearth of the false fireplace. Sometimes a TV can be supplemented with special optics, which consists of light filters. With its help, the image of fire will be the most expressive and voluminous. In addition to this optics, it is possible to use a mirror system. They are located in the corners of the fireplace, and the picture turns out to be more realistic; such lighting looks very beautiful. In rare cases, it is possible to use holographic installations. But this is not quite profitable.

Decorative firewood for the fireplace

In specialized salons you can find an abundance of options for such products; quite realistic firewood with a natural log pattern is available for sale. They can be plastic or ceramic. Any imitation, purchased or made independently, is intended to give realism decorative fireplace to help you feel all the splendor: home comfort, harmony, tranquility and warmth.

Fireplaces are increasingly being installed not to heat the room, but to create an atmosphere of comfort. In this case, decorative firewood will be a relevant purchase.

Imitation of plastic firewood or coals, has a fairly simple operating principle.

Coal and firewood are illuminated with red lighting. The light bulb can be located inside the firewood. Of course, this is not so reliable, but still. More expensive electric fireplaces are characterized by flickering or a picture of artificial transmission of fantastic flames. It is possible because special mechanism, in which special elements, rotate around the lamp, alternating with transparent and shaded areas. Such lighting can be located either behind the fake logs, or in the inner part.

Exactly the same lighting system can be used to achieve the effect of fire, using natural coal, which should be placed in the niche of a false fireplace. In this case, the backlight should be placed from the bottom.

A believable imitation of fire in a fireplace with your own hands (video)

So, in an apartment there is absolutely no possibility of installing a real fireplace. However, a fireplace, even if it is artificial, requires imitation of a realistic flame. You can do this yourself in several ways, described above.

Examples of a fireplace dummy (photo ideas)

Today, special attention in the interior is paid to the issue of decoration. Most installed fireplaces perform decorative functions rather than heating. And the usual types of fuel are changing to biofuel or electricity. Therefore, making dummy firewood for an electric fireplace with your own hands is considered a fairly popular topic.

What are they needed for

Many will ask the question: why are such dummies needed? Well, first of all, it's a matter of aesthetics. And secondly, you don’t need deep knowledge in the field of furnace equipment to notice the difference between a hearth with electrical element heating and wood fireplace.

Due to the absence of smoke and rapid heating of the room, electric fireplaces are an advantage when compared with a wood-burning fireplace. But with all this, a certain naturalness of the hearth is lost, its charm and charm are lost. If you add dummy firewood to such a design, the picture of the fireplace changes radically.

This situation is especially relevant for a city apartment, where installing a real fireplace is simply impossible.

Firewood imitation options and materials

In stores you can find many options for such products. They can be made of plastic or ceramic. Any imitation, purchased or made with your own hands, is designed to give realism to an artificial hearth to help you feel all the charm of home comfort and warmth.

Imitation of firewood or coals, made of plastic, has a very simple operating principle. Typically, such objects are illuminated with red light bulbs.

It is also possible that the light bulb is located inside each element. Of course, this is not entirely realistic, but still.

More expensive fireplace models are characterized by a flickering pattern or imitation of artificial flames, which occurs due to a special mechanism in which elements rotate around the lamp, alternating transparent and shaded sectors. This type of lighting can be located either behind a dummy of firewood or inside it.

The exact same lighting system can be used to achieve a burning effect, using real coal, which is placed in the fireplace niche.

In this case, the illumination of the dummy and coals is carried out from the bottom. Imitation of plastic firewood and coals, of course, is not ideal, and it has its own errors.

To hide all the shortcomings as much as possible, artificial firewood with lighting is placed as deep as possible in the fireplace niche, and the hearth is decorated with a fireplace grate, which serves as a mask for the shortcomings.

In expensive models of electric fireplaces you can find several techniques for simulating fire. To make the picture realistic, they use not only dummies of firewood, but also mirrors with strips of foil or ribbons in which the backlight lights are illuminated, creating the illusion of flames. In addition to everything, the models are equipped with various functions, steam supply, which imitates smoke from a fire, and a sound device that reproduces sounds similar to the crackling of firewood.

If your financial capabilities are not enough for such items, then as an option, you can try making dummies of firewood with your own hands.

Production of decorative firewood

Making decorative firewood with your own hands is quite easy; for this you can use materials that almost every person has.

Stores offer ready-made firewood made of plastic or ceramics, but the cost is quite high.

Therefore, it is more advisable to make decorative firewood with your own hands with minimal financial costs.

To make a dummy you need to prepare:

• cardboard;
• paint;
• glue;
• scotch.

The manufacturing process can be divided into four stages.

• The first stage is to prepare blanks that have various sizes. Some parts of future firewood may be longer, the side parts of the logs may be slightly smaller.
• The second stage consists of gluing the cut blanks. To do this, rectangular sheets of cardboard must be tightly rolled into a roll. For gluing, you can use glue or tape. Short rolls are attached at an arbitrary angle to a longer piece, forming the rest of the branch.
• The third stage involves painting the blanks. You can use paint for this various colors, black, white or brown. The main goal of coloring is maximum realism.
  The final step of coloring is coating the logs with varnish.
• And the last stage is laying the logs in the niche of the electric fireplace. They can be laid in any direction, crossing or placing in a certain order.

Based on this, wood-burning imitation for a fireplace is very easy to do with your own hands, it will not require large financial expenses, and you will definitely get pleasure from the final result.

Decorative Firewood

Placing decorative firewood

Particular attention must be paid to the placement of firewood in the fireplace niche. You can do this yourself and give the hearth a more aesthetic appearance; it will become more believable.
To place a fake log in the fireplace niche, you need to decide on the installation option.

Place logs in the form of a “house”.

Arrange the wood in a cone.

In a chaotic order, as your imagination suggests.

Imitation of firewood looks quite impressive in combination with other decorative elements, such as stones or candles.

If for some reason it is impossible to place artificial firewood in the depths of the firebox, you can place a separate emphasis on the firewood by placing it outside the hearth.

In addition, you can build a firewood shed with your own hands, into which decorative firewood is placed.

With a harmonious selection of stove equipment and decor for it, you can turn the hearth into an object of great attention. The combination of firewood and fire, regardless of whether they are natural or artificial, will add unique charm and comfort to any interior.

Video: How to make a fire (hearth) for a decorative fireplace