• Interior
• Windows
• Walls
• Projects
• Buildings

How to make hot coasters with your own hands. How to make a hot stand out of wood with your own hands Making hot stands with your own hands

Pleasant little things made by yourself add warmth and comfort to your home. Such things create a unique atmosphere and also bring many joyful moments in the process of working on them.
The kitchen is the most comfortable and sought-after place in the house. After all, it is in the kitchen that we spend a lot of time preparing food, washing dishes or intimate conversations with a cup of tea. In order not to damage the surface of your favorite table or expensive kitchen countertop hot bottom of a cup of tea, we need a hot stand. If you are a creative person, you will come up with many ways to make such a stand. This one is small kitchen accessory It can be knitted, carved from wood, or woven from wicker. Let's look at three simple ways making a hot stand for the table. Most likely everything necessary materials you can easily find it at home.

Making a hot stand from disks, coarse linen thread and wine corks

A cork hot tray is a popular handmade version of this kitchen accessory. We suggest you make such a stand in an easy and quick way.

For needlework we will need:

• 2 unnecessary CDs;
• a sheet of thick cardboard;
• several meters of coarse linen thread;
• wine corks, approximately 15 pcs;
• good glue that can glue linen thread to plastic (you can use Moment Crystal).

We cut out a round piece of cardboard in the shape of a disk. We make a “sandwich” using glue: the first layer is a disk, the second is a cardboard piece, the third is a disk again.

While the workpiece is drying, cut the corks in half. We should have 30 halves. We try to ensure that the cork pieces are the same length.

We lay the linen thread on a round piece. To do this, in the center of the part, to the cardboard, which is visible through the hole in the disk, glue the tip of the thread. Then we wind the thread in a spiral, gluing it as we go, until we cover the entire surface of the disk. You can make a side if you glue several new turns of thread along the edge of the workpiece to the already formed ones.

Then, using the same glue, we attach the cut corks in a circle. We wait until the glue dries.

Now we know how to make easy-to-make hot coasters from cork.

How to make a hot pad from an unnecessary computer power supply

Surely many people still have old, already broken computer parts at home. Now we will learn how to quickly and easily make a stand from an unnecessary power supply for a computer. If you don't have this detail, don't worry. Perhaps one of your friends has such a treasure, or is nearby service center for the repair of digital equipment, where you can purchase a non-working power supply for a nominal fee or a simple “Thank you.”

The manufacturing process is very easy. You need to unscrew the block cover and bend it inside side walls. This is a job for a man because it requires some physical effort. Once the stand is ready, you can decorate it. For example, paint with acrylic paints.

This stand will withstand any surface, even a very hot one.

Hot stand made of wooden base and piece aquarium stones

Very beautiful coasters for hot dishes are made from pieced aquarium stones. They are usually made of glass. And the glass high temperature may crack, so you cannot place a pan that has just been removed from the heat on such a stand. But a mug of hot tea or a plate of delicious soup will look great on it.

List of required materials:

• wooden base for stand;
• piece aquarium stones;
• acrylic paint to match the pebbles;
• primer to wood.

First you need to cut it from a board or purchase wooden blank suitable size. You can show your imagination and choose something else as a base, for example, a “sandwich” made of disks and cardboard, as at the beginning of the article. But square stands decorated with pebbles look more interesting. Then we prime the workpiece. We wait until the primer dries and paint acrylic paint. The color of the paint should be in harmony with the stones. The last stage is to place our aquarium decor on glue. You can use the same “Moment Crystal”.

Our stands are ready to perform their function.

Making hot coasters is a fun and creative process. If you have a lot of ideas and no longer need coasters at home, you can make a small gift for your friends. They will definitely love the original hot stand. The master class published on our website will help you master the fascinating process of making kitchen accessories with your own hands.

(Visited 3,993 times, 1 visits today)

If you are a fan of needlework and creativity, then you will be interested to know how to make a hot stand with your own hands. It is easy to make from materials available in the house. Even a beginner can master the technology. So, get acquainted with the options and choose the ones you like.

DIY hot stand: interesting ideas

If you decide to make such a souvenir, first of all decide which method is best for you. This will depend on your personal preferences and skills. Stands can be:

• made of wood;
• sewn from fabric using patchwork technique;
• crocheted;
• made of felt;
• made from computer disks, buttons;
• made using decoupage technique on ceramic tiles or wooden blanks.

Any of the ideas can be easily modified and has many options and interpretations. Choose, complement, create.

Use cuts from trunks and branches

A very beautiful do-it-yourself hot stand made of wood, made from round pieces of the same or different diameters. It is not difficult to prepare them; an ordinary saw and suitable tree. Apple and cherry tree cuts look good, as they have an original structure. But you can choose any option you like.

The operating technology is as follows:

1. Prepare cuts of branches with a diameter of 5-6 cm. If the bark fits tightly to the wood, it does not need to be removed. Be sure to sand the face of the rounds until smooth.
2. Make a composition from saw cuts. The fewer parts, the stronger the product will be. In any case, the parts must touch each other in several places.
3. Connect the joints with glue.
4. For greater strength, the stand can be made of two layers. Accordingly, the planes of the cuts are also connected using glue.
5. Leave the workpiece under a load for several hours until the product is completely dry.

Everything is ready! If desired, varnish the surface, although the natural texture is no less beautiful.

Another way is to use one large cut, which can be decorated with burning, carving, contour drawing, watercolor ornament, followed by varnishing. If you don’t know how to draw, use decoupage (the technology will be described below). As you can see, one material can be used in different ways.

We sew a souvenir

You can also sew a do-it-yourself hot stand from fabric in different ways. There are a lot of ideas. First, decide on the size and shape of the product. This can be a souvenir of a corresponding diameter, as well as a full-fledged rug or napkin. Both options are performed in the form:

• vegetables;
• fruit;
• berries;
• flowers;
• animals;
• fairy-tale characters;
• abstract patterns using patchwork technique.

If you've ever made potholders, the technology is similar. The product is made of two layers of thin fabric with dense material between them.

Felt is of particular interest. It is easy to work with, as it does not require overlaying the edges, because this material does not crumble. In addition, it is quite dense, and when using several layers of felt, stacked on top of one another for decorative purposes, no additional layer is required. Stands in the form of slices of oranges and lemons, animal faces, hearts and any other subjects are made from felt. This material is presented in rich color scheme bright colors, so there is a lot of room for imagination.

Beauty from old discs

When making a stand, you need to take into account that it must be dense, durable and resistant to temperature. If you are going to use thin fabric on the right sides, a thick backing is a must.

You can very simply make a hot stand with your own hands from computer disks, which will act as a blank. The operating technology is as follows:

1. Take two disks and cut out circles from the fabric that are a couple of centimeters larger in diameter.
2. Place the disk on the fabric blank with the wrong side facing the disk (you can also lay it with a layer of padding polyester).
3. Sew stitches along the perimeter of the circle at a short distance from the edge (1 cm), and then pull the threads together. The disk will be “sewn” inside. Do the same with the second workpiece.
4. Take a strap of a length that is equal to the perimeter of the disc. Cover the part with braid or tape.
5. Connect all three elements by sewing two “covers” onto the strap.

The product is ready. Fast, simple and beautiful.

Knitted fantasies

Spectacular and original stand under hot water with your own hands can be done using this technique. As a rule, all products are knitted in the round according to the napkin principle.

To make such a souvenir, you just need to find the appropriate pattern, yarn and hook. If you are good at this technique, you can knit any product even without a pattern. Some people like to tie existing blanks, for example, the same computer disk, covers, corks, beads. Flowers and fancy geometric shapes are assembled from small parts.

Decoupage

This technique is suitable for those who are vaguely familiar with needlework or have little experience, but want to immediately get a masterpiece.

The point of the work is that on a dense base from a cut of wood or, for example, ceramic tiles(previously cleaned and degreased) a napkin (special or single-layer table napkin) with a decorative pattern is glued. After drying, the surface is covered with several layers of glue or varnish. Reverse side ceramic tiles are covered with a layer of glued felt or fleece.

So, you have seen how to make a hot stand with your own hands. Choose what is closer and more interesting to you. Create table decorations or just original gifts from scrap materials.

To make the kitchen more comfortable, craftswomen can make a hot stand with their own hands. This is not only a beautiful interior detail, but also a very necessary thing. Any materials will be used.

Tree

The advantage of using this material is that it is more durable than, for example, fabric. To make a wooden hot stand, made with your own hands, you will need:

• Wooden blanks (sold in craft stores. Choose the shape at your discretion).
• A simple pencil.
• Washing gum.
• Acrylic varnish.
• Paints, watercolors are better suited.
• Brush.
• Burning device.

Let's get started:

1. To begin, draw on paper what a hot stand you make yourself should look like. It could be flowers, berries, an ornament or an inscription. The border around the edges, which serves as a frame, looks beautiful. Once you do this, it will be easier for you in the future. Now transfer the image with a simple pencil onto a wooden blank.
2. Take the burning device and wait until it heats up. When everything is ready to continue working, burn out the design.
3. If a simple pencil is visible in some places, be sure to wipe it off with an eraser, otherwise the work will look sloppy.
4. You can leave the design of the stand as is, just cover it with acrylic varnish, or you can continue to decorate it.
5. To do this, take paints and start decorating. Do this very carefully, because it will be difficult to get rid of errors. If you work with acrylic, then pay attention to the fact that in some places you will have to apply several layers to add saturation. Also, these paints can leak.
6. The stand must dry, and then it must be varnished and allowed to stand for several hours to dry completely.

Made with your own hands!

Felt

It’s even easier to make hot coasters from felt with your own hands. They give more room for imagination than wood. You can choose the color and design based on the style of your kitchen.

To create “citrus” coasters you need to take:

• Different colored felt (orange for orange, yellow for lemon, green for lime, etc.)
• Scissors.
• Threads in colors matching the fabric or white.
• A needle.
• Pins.

What to do:

1. Create blanks. For one fruit you need two large circles of colored felt (the size of a future stand), a slightly smaller white circle and eight colored slices.
2. Arrange the pieces in this order: large circle, medium circle and slices. Pin it with a pin.
3. Sew the slices around the perimeter through both layers.
4. To hide the seams, you need to sew a second large circle to the bottom one.

It's very simple! Create a few more of these “fruits” so that there is enough for all guests.

Idea

To create a stand for hot food, which you can easily make yourself, you can use scraps of felt. For this you only need one big piece, which will be the base, and several strips 5 millimeters wide. Length doesn't matter.

Take 3 different colors and place them on top of each other with a ladder, the indentations should be up to 10 millimeters. The beginning needs to be glued, now begin to tightly twist the strips with a snail, add glue if necessary. To complete the flagellum, make the inner strip 2 centimeters shorter than the outer one and secure it with glue, do the same with the middle one, only make it shorter by only 5 millimeters. Make as many snails as necessary to cover the entire base. Attach the workpieces to it using a heat gun.

Textile

To create such hot mats with your own hands from fabric, you will need small trimmings. You don't even have to go to the store to buy new materials; you probably have them lying around somewhere at home. So, for work you will need:

• Fabric in eight different colors.
• Sewing machine (if not, you can try to sew it carefully by hand).
• Hexagon pattern.
• Scissors.

What to do:

A homemade hot stand will be a beautiful addition to any feast. As you have seen, it is not at all difficult to make it from different materials.

Such coasters for hot dishes can be seen in large numbers in Crimean souvenir stalls. They are made from juniper and they sell very quickly. In conditions middle zone Of course, you won’t find juniper, but such a stand is very easy to make with your own hands from tree branches with a beautiful pattern on the cut. These are acacia, apple, plum, apricot, oak and ash.

You can make several of these stands in an hour. First, we need to select branches 3-6 cm thick. You can combine cuts from branches of different thicknesses, it will be beautiful.

It is most convenient to cut a branch into cuts 4-5mm thick with a miter saw:

But you can cut the cuts with a hacksaw. It is advisable to sand each cut from the front side with sandpaper.

The bark can be scraped off with a knife, but this is not necessary, especially if the bark is tightly adjacent.

Now we combine a stand from saw cuts of different diameters (in my case). Front side facing inward:

However, it should be borne in mind that the fewer links, the easier it will be to glue the stand together. It is desirable that the round pieces of wood adjoin each other at several points. We glue the links of the stand together, placing saw cuts on top of several circles. To do this, coat the junction areas with PVA glue:

After making sure that all the links are interlocked, we send the stand to dry under pressure. I took a linen bag of sand, placed it on a stand and placed another bucket of water on top. The stand is glued together in 4-5 hours.

There is another manufacturing option wooden stand under hot. We cut out a circle from matting and glue cut branches onto it on both sides. It turns out very stylish and beautiful. Plus it's easier to do:

Please rate this post: