How to make a hidden blade from the game Assassin's Creed out of paper with your own hands. Obsessed with a secret order, or how to make an assassin's blade with your own hands How to make hidden blades from paper
Assassin's Creed is a game that has captivated millions. In it, the main character Desmond will have to travel back in time to his past and begin the fight against the Templar Order. The first part of the game, set during the Crusades, hit the computers of action-adventure fans like a hurricane. For the platform PCs release such high-quality games very rarely. In the second part, we are transported to Italy during the Renaissance. The continuation of the franchise was so successful that it received two additions - Brotherhood and Revelations.
In 2013, the third series appeared on store shelves, in which the action takes place during the colonization of America.
The successful franchise has had an incredible impact on gamers. The network began to be full of fan fiction and cosplays. The idea of becoming a brave assassin simply captured young people. The unusual retractable blade attracts special attention.
After completing training and passing exams, elite assassins were accepted into the order. Upon initiation, the assassin received a retractable blade and lost his middle finger. It was easy to carry out unnoticed murders with such weapons. And thanks to his quick response, he could easily help decide the outcome of the battle.
If you want to feel like a cold-blooded killer, the best hunter of the order, then look at how to make an assassin’s blade with your own hands, for example, from paper. This can be done at home using available materials.
So, to make an assassin blade with your own hands, we will need the following:
- Lace.
- Paper.
- Scotch.
- Scissors.
- Threads.
- Toothpick.
1. Roll the paper into a tube and secure with tape. Don't make it too narrow.
2. We crush or flatten it on both sides so that we get a parallelepiped.
3. Place the workpiece on your hand and measure required quantity. The length should be approximately half the distance from the hand to the elbow. Cut off the necessary part and set aside the rest.
4. Now we proceed to the main part of the consideration of how to make an assassin’s blade with your own hands. We strengthen our box with tape. We make cuts in the middle of the sides, which we also secure.
5. Take more paper and roll it into a tube of smaller diameter. We fix it as in point 1.
6. We flatten it in the same way as a large workpiece, then divide it into several small parts, more precisely, into two.
7. We glue one of the blanks on one side and cut it out on the other in the shape of a concave arc. Stuff some paper inside.
8. We insert the second blank, the end of which is cut to the shape of a dagger, into the first one. Glue it together.
9. Let's move on to the next part of the description of how to make an assassin's blade with your own hands. We take a toothpick and use glue to fix it at the base of our paper knife.
10. Connect our hidden blade to the box. Insert the ends of the toothpick into the slots. We eliminate the shortcomings by gluing the paper inside the box on both sides of the blade (top and bottom).
11. We make a small hole in the upper part of the “blade” into which we thread a thread, then fasten it. At one end we make a loop, it will be fixed on the finger.
12. Take the lace and cut it into two parts, and then glue them onto our box. Thus, the mechanism will be secured to the hand. This concludes the description of how to make an assassin blade with your own hands.
So, now you have at your disposal a completely non-dangerous model of a deadly weapon. Some people make it from real knives, but such a dagger is quite suitable for the game. We looked at how to make an assassin's blade; the diagram can be drawn up by you yourself with some changes.
To satisfy a child's interest in the warriors of the night and their activities, you can give him a prototype of their weapon. Learn how to make a paper blade with your own hands. Your son will definitely like this craft; he will be happy to play with this safe blade, imagining the mysterious world of warriors with adventures.
What you need for the craft
Nine sheets of A4 paper;
- scotch;
- a stationery knife or regular scissors.
There are several ways to make a blade out of paper, depending on the method you may need additional materials. We present you the easiest and fastest way.
Paper blade - step by step instructions
1. Take four sheets of paper and place them one on top of the other. Fold them in half once, then again.
2. Using a ruler, measure a strip one centimeter wide on one side. Cut it with regular scissors or a stationery knife.
3. Trim the corners to create a sharp end.
4. Now you need to secure the sections with tape along the entire width so that they do not open later.
5. Start making the case. To do this, you will need four sheets of paper, folded in half along the long side twice.
6. The next thing to do is cut out the central part. On each side of the folded paper, measure two squares, several centimeters wide, cut the paper in half with scissors in the measured place. Then cut out the remaining part in the middle - a rectangle. The two parts on the sides should be secured with tape so that they stay together with the base of the case.
7. Take the dagger and attach a small stopper to the back of its blade using tape. It will help ensure that the blade does not fall out while moving. Insert the blade into the previously made case.
8. Now you should put a sheet of paper on half of the case, placing it along the blade right near the middle, where the limiter is located.
9. Wrap the sheet around the case, leaving a few millimeters at the top. And then secure it in different places with tape.
10. Try using a blade. It should pop out of the case when you make a sharp swing to the left.
Now you know how to make a blade out of paper, photo and video master classes will help you create this craft. The main thing is to strictly follow the instructions, make even folds and secure all the parts with tape. This craft is very simple to make, yet convenient and practical to use.
Now your child will be able to happily play with a paper blade, imagining himself as an oriental warrior performing a special task. By the way, your son can also take part in making the blade; we are sure that he will like this process.
Prepare the necessary parts of the structure and tools. Crafting a hidden blade is not easy and you will most likely have to visit a shop household appliances to purchase necessary tools and parts of the future weapon. The following is a list of what you will need to make a hidden blade:
Disassemble the drawer guide. The guide consists of three parts. First slide the black slide under top part guide and remove this part, then bend metal strip located at the end of the lower part of the guide and move the middle part, the one with the bearing raceway inside.
- You can set aside the top and bottom parts of the guide - you will no longer need them for your product.
- You will need additional ball bearings. Keep them in case you suddenly lose a ball bearing while working; That's when spare parts will come in handy.
Remove the ball guide from the middle part of the guide. This can be done by disassembling the structure or simply removing the cover at the end of the guide. Pull out the required part and make sure all ball bearings are in place.
Cut the piece to the length of your forearm. Extend your arm forward, bend your elbow, and point your palm upward. Place the piece on your forearm so that its end rests on your wrist. Calculate how many centimeters you need to cut so that the structure fits comfortably on your hand; there should be literally a few centimeters left before the elbow bend. Use a Dremel to cut the piece into suitable length from the end where there is no lid.
- Do not cut off the end of the part where the cover is located, otherwise the ball bearings will fall out. You will move this part later.
- Once you have cut the piece, use a file to file away any sharp edges.
- Follow safety precautions when cutting metal. Wear special glasses and work in an area suitable for such work.
Fold the edges of the part. Use pliers to bend the edges of the piece in half in the part where there is no lid. This will prevent the ball bearings from falling out when your structure returns to its original position.
Cut out the center part of the piece. Cut a rectangular piece of metal from the center of the piece using a Dremel. Make sure you don't cut out the part where the cover will be reinstalled and leave a couple of centimeters of metal in the folded part of the piece. Remove the cut piece and sand down the sharp edges.
Cut the ball guide. There should be a total of 5 holes and you need to trim each one so you only need to make three cuts. Use a Dremel to cut the ball guide at a right angle.
- The cut piece should contain a total of 6 ball bearings on each side.
- If your part is long and you can fit the long part with ball bearings, you can trim the part to just 4 holes. Do not cut the guide into more than 3 holes; However, for the product to work correctly, only three holes are enough.
"Assassin's Creed", or, in Russian, "Assassin's Creed" is a series of action-packed video games, the main character of which is the hereditary assassin Desmond Miles. The game developers “gave” the main character a wide arsenal of weapons, including a devastating retractable blade. Do you also want to feel like a participant in a hectic virtual reality? It's easy. Today we will tell you...
To make this craft you will need 8 sheets of office paper, clear tape and a little patience.
Step 1."Blade" of the blade.
Take four sheets of paper and place them one on top of the other. Fold them in half twice in succession. Using a utility knife, cut a 1 cm wide strip on one side along the ruler. Sharpen the end by cutting off the corners from one end. To prevent your blade from falling apart, cover it with tape all around.
Step 2. Case.
Just like when making a blade, fold the four sheets in half twice. Then cut out the central part and secure the remaining parts with tape.
Step 3. Attach a protrusion-limiter to the back of the “blade” using tape, which will prevent the blade from falling out when moving. Insert the blade into the case.
Step 4. Place a sheet of paper on the case so that the latter moves downwards from the limiter by a couple of millimeters.
Step 5. Wrap the sheet around the case and place it on top so as to leave a gap of about 5 millimeters. Secure the sheet at the ends with tape. Now, with a sharp swing to the left, the blade should jump out of the case.
So from now on you know how to make an assassin blade out of paper with your own hands. When acting out a scene from your favorite game, you can hide your weapon in a wide sleeve and effectively pull it out at the most unexpected moment.
