≡× MENU

• Interior
• Windows
• Walls
• Projects
• Buildings

Setting up a network on Android. Connecting and setting up the Internet on an Android device

A modern smartphone can theoretically be used without an Internet connection. But in this case, in terms of functionality, it will not be far from the simplest push-button mobile phone. Therefore, we recommend that you connect to the Internet using our guide. And you don't have to deposit money into your account - in the article you will find instructions on connecting to public Wi-Fi networks.

If you are just going to buy a smartphone, be sure to pay attention to its characteristics. The point is that different models have at different speeds data transfer. It is rarely written in numbers - instead, the supported communication standards are indicated in the characteristics. Here is a list of them in order of increasing speed:

• GPRS;
• EDGE;
• 3G;
• 4G (LTE);
• LTE Advance.

Focus on this point in the specifications if access to the Internet is very important for you. Also remember that not all operators have 4G equipment in absolutely every big city our country. And there’s nothing to say about towns and villages - a 3G smartphone will do just fine in them.

You can also pay attention to the supported Wi-Fi standard. In the vast majority of cases, we transfer data via WiFi 802.11n. But in lately Routers that support the standard are becoming increasingly popular 802.11ac, providing a very high speed of receiving and transmitting information. If you plan to install such a router in the near future, then it is advisable to purchase a device that is capable of working with the above-mentioned Wi-Fi standard. However, this is not at all necessary.

Setting up a Wi-Fi network

But enough talk about theory. It's time to talk about how to set up the Internet on Android. You should start by setting up Wi-Fi. This is usually where novice users have problems, since this process almost not automated. Note that the easiest way is to connect to your own router. It’s a little more difficult to do this with friends, at work and somewhere else. So, you should do the following:

Step 1. Go to " Settings" If the corresponding icon is not in the notification panel, then find it in the menu.

Step 2. Go to the section " WiFi" On some devices there is a switch next to it. It needs to be switched to the on position.

Step 3. If there is a checkbox in this section, then activate it.

Step 4. Now click on the name of the Wi-Fi network with which you want to turn on the Internet on Android.

Step 5. If the network is protected, then enter the password for it. For greater convenience, you can check the box next to “ Show password" When you are finished entering your password, click on the “ Connect».

That's it. Now your smartphone has remembered this network and will connect to it automatically. It’s the same with public networks - if you’ve already connected to one once, then in the future in this place your device will connect to it independently. Although there are exceptions.

Using WPS

You can connect to your friends' Wi-Fi using another method. It consists of pressing the WPS button on the router. This allows you not to enter a password and network name. But first, you also need to press the WPS button on your smartphone or tablet - in this case, not physical, but virtual. This is done as follows:

Step 1. Go to " Settings».

Step 2. Go to the section we have already mentioned “ WiFi».

Step 3. Activate the switch if necessary. Then click on the button Options" On many devices it is made in the form of a vertical ellipsis and is located in the upper right corner.

Step 4. Click on the item " Additional features " On some gadgets this step is skipped, since the item “ WPS" is located directly in the context menu.

Step 5. Click on the item " WPS button».

After this, the smartphone will connect to the network distributed by the router, as a result of which you will be able to access the Internet.

Setting up GPRS, EDGE, 3G and 4G

Setting up mobile Internet makes everything easier and more difficult at the same time. Usually, the user does not need to delve into the settings at all - telecom operators send a special file that automatically enters all the parameters. This does not happen only in the most extreme cases - when your model of smartphone or tablet is not in the operator’s database. But believe me, these databases are so extensive that the only thing you can’t find there is all sorts of Chinese nonnames. If you are unlucky, you will have to configure Internet access manually. This is done on Android as follows:

Step 1. Go to " Settings", as you did earlier.

Step 2. Go to the section " Other networks" On some smartphones and tablets it may be called " Other networks" or " More“- it all depends on the translation.

Step 3. Here you need to click on the item “ Mobile networks».

Step 4. Then everything depends on the specific implementation. software. In some devices you will be taken to a menu like the one shown in the screenshot below. In this case, you need to open the item “ Access Points (APN)" In other models, the corresponding settings may immediately open.

Step 5. Be that as it may, you need to add your operator's access point if these parameters did not arrive after you inserted the SIM card. In our case, this is done by pressing the button with a plus sign.

Step 6. After clicking the corresponding button, you will see many fields. First of all, pay attention to the points “ Authentication type" (may also be called " authentication type") And " APN type"(on older devices it is called " Access point type»).

Step 7 In the first paragraph, you must select “PAP”. This type of authentication is used by the vast majority of cellular operators around the world.

Step 8 In the second field we enter manually “ default,supl" - without quotes and spaces, as in the following screenshot. Click the button OK».

Step 10 Finally, click on the item " APN" or " Access point" Enter your operator's specific Internet address here:

• MTS - internet.mts.ru
• MegaFon - internet
• Beeline - internet.beeline.ru
• TELE2 - internet.tele2.ru

• MTS - mts and mts
• MegaFon - gdata and gdata
• Beeline - beeline and beeline
• TELE2 - both fields are empty

If you use the services of a smaller telecom operator, then you can find out its settings by visiting the official website. You can also call the call center - they will definitely dictate your APN, username, and password.

Summing up

As you understand, configure mobile internet possible without any difficulty. This is done almost easier than on the old ones. push-button phones. Fortunately, with current technologies you need to bother with this in very rare cases.

It's hard to imagine modern man who does not use the Internet in everyday life: it's not just about receiving email, searching for information and viewing media files. The Internet is often associated with work and study, but going to the shopping center is often impossible without using the World Wide Web, no matter how strange it sounds. Everyone needs the Internet - from businessmen to old ladies and schoolchildren. Therefore, the question arises of how to connect the Internet on an Android phone.

How to connect Wi-Fi on your phone

The easiest way to connect to the Internet is through traditional Wi-Fi. There are access points everywhere, and many people at home also use a Wi-Fi connection, because it is fast, convenient and affordable.

How to connect Wi-Fi on Android

• Go to " Wi-Fi networks»
• Choose the right network
• Connect if the network is not password protected (there is no padlock symbol next to the network signal strength). When using, do not forget that it is better not to pay for purchases through such networks and not to log into personal accounts, as traffic can be intercepted.
• To connect to a secure network, you need to know the password and enter it when connecting.

After connecting, you can use the network, but it is advisable to check whether this network distributes the Internet (for example, go to the browser and try to load a page or using the Speedtest program).

How to connect 3G on Android

• Go to " Settings»
• In the “Wireless Networks” section, access to 3G can be found in the “ More" or " Additionally»
• Turn on 3G
• A list of available 3G networks will appear

How to set up internet on an Android phone

The days of online clubs have sunk into oblivion, and all thanks to new technologies. Today the World Wide Web is accessible to everyone. Mobile Internet will surprise no one; cellular operators offer a variety of tariff plans through network modes such as EDGE, 3G or 4G. The user only has to choose the optimal offer for himself. Typically, operators send automatic settings after installing a SIM card in the phone. If this does not happen, call the support center and, using the tips from the informant, order the settings, or use the official website of the mobile operator.

How to set up APN. Parameters for connecting to the Internet of Russian operators

If you are unable to connect to the Internet, you will need to make the settings manually. To do this, you need to know which telecom operator provides you with services (MTS, Beeline, Life...), what type of 3G network is available to you (you can find out on the website or by calling technical support) and connection parameters, including the so-called APN ( Access Point Name) - access point name.

• Go to " Settings»
• Find the line " SIM cards and networks»
• Select " Access Points (APN)»

• Select Internet access point (or APN)
• Click " Add APN»
• Enter the Internet access parameters that you should obtain from your operator. A password, login, network name and APN are required.

After the operations performed, you should check whether " Data transfer" Now select your preferred " Network mode» (2G, 3G or 4G) depending on the services provided by the telecom operator.

Below on the page are the parameters for connecting popular Russian operators, so that you understand how to set up the Internet on your Android phone:

MTS Internet settings

• Access Point APN - internet.mts.ru
• Username - mts
• Password - mts

For devices such as Huawei, Fly, Lenovo, in the " Authentication type"The default setting is " Not specified" For proper functioning of the mobile Internet, we recommend using the “ No».

Setting up Beeline Internet

• Name - Beeline Internet
• APN- internet.beeline.ru
• Username - beeline
• Password - beeline

Internet setup Megafon

• Name - Megafon
• APN- internet
• Username - gdata
• Password - gdata

Setting up Yota Internet

• Access Point APN - internet.yota
• Username - yota
• Password - not entered

Setting up Tele2 Internet

• Access Point APN - internet.tele2.ru
• Username - Tele2 Internet
• Password - not entered

Parameters for connecting to the Internet of Ukrainian operators:

Internet setup MTS Ukraine

• Name - MTS-internet
• Access Point APN - internet
• Username - any
• Password - not entered

Setting up life internet on Android (setting up lifecell internet on Android)

• Access Point APN - internet
• Password - not entered

Setting up 3G Kyivstar on Android

• Access Point APN - www.ab.kyivstar.net(for contract subscribers: www.kyivstar.net)
• Username - not entered
• Password - not entered

Setting up TriMob Internet

• Access Point APN - 3g.utel.ua
• Username - Trimob
• Password - not entered

How to set up Internet Phoenix on an Android phone

• Access Point APN - internet
• Username - not entered
• Password - not entered

If you are roaming and want to know how to set up the Internet on your Android phone, you need to enable the appropriate settings. Keep in mind that roaming costs are quite high.

How to delete internet settings on Android

Sometimes there is no need to use a particular access point (APN) and the question arises of how to delete Internet settings on Android. We proceed as follows:

• We find " Settings", then " More»
• Go to " Mobile networks»
• Select " Access Points (APN)»
• Click on the three dots in the upper right corner
• Resetting the settings

Recently the site published an article about Android network setup. We advise you to read it if you have problems with the network.

If I connect my smartphone to the Internet, can I use this connection simultaneously on my tablet?

Yes, it is possible, using your smartphone as a modem or hotspot. To do this, go to " Settings» and select the access point connection method (Wi-Fi, Bluetooth).

Every year the mobile Internet becomes better and faster. However, the technology is becoming more complex, as a result of which the likelihood of failures and malfunctions is growing. Therefore, we want to tell you what to do if the mobile Internet does not work on your Android device.

There are many reasons why your phone cannot connect to the Internet on the operator’s network: it may simply not be configured, or you may have encountered a hardware malfunction of the network module. Let's look at the causes and methods of eliminating the problem in order.

Reason 1: Insufficient funds in the account

The most common reason for cellular Internet not working is simply not enough money in the account. Perhaps you simply didn’t pay attention to it and didn’t replenish it on time. Check the amount of funds using the USSD request of your operator:

• Russian Federation: MTS, Megafon - *100#; Beeline - *102#; Tele2 - *105#;
• Ukraine: Kyivstar, Lifecell - *111#; MTS, Vodafone - *101#;
• Republic of Belarus: Velcom, MTS, life;) — *100#;
• Republic of Kazakhstan: Kcell - *100#; Beeline - *102# or *111#; Tele2 - *111#.

If you find that there is not enough money in your account, simply top up your balance using any available method.

Reason 2: No coverage or device is not registered on the network

The second reason for the lack of Internet is that you are outside the network coverage area. You can check this by looking at the indicator in the status bar: if you see a cross icon on the indicator, then you most likely will not be able to connect to the Internet, or make calls.

The solution to this problem is obvious - go to a place where the network catches better. If you are at a point with reliable reception, but the no network icon does not disappear, most likely your device is not recognized by the cell tower. This is usually a random single failure that can be easily fixed by rebooting the device.

There may also be problems with the SIM card, the main problems of which and how to resolve them are described in the article below.

Reason 3: Airplane mode is on

Almost from the moment it appeared mobile phones they have a special mode designed for use on airplanes. When this mode is activated, all types of data transmission (Wi-Fi, Bluetooth, communication with a cellular network) are disabled. It's very easy to check - look at the status bar. If you see an airplane icon instead of the network indicator, then offline mode is active on your device. It turns off very easily.

After completing these steps, check if the mobile Internet is working. Most likely, it should turn on and function normally.

Reason 4: Data transfer disabled

Another very simple reason for the lack of mobile Internet connection. You can check this as follows.

You can also turn on mobile data with a switch in the status bar, if it is present on your phone.

We also note that in some cases, data transmission may be disrupted by malware. If you can’t turn on the Internet using the method described above, then it makes sense to install it on your phone and check the device for infection.

Reason 5: Incorrect access point settings

As a rule, when you turn on your smartphone for the first time with a SIM card inserted, you receive a configuration message with settings for the mobile Internet access point. However, in some cases this may not happen, especially if you are using a rare or uncertified device for your country.

Android is very “Internet-loving” operating system and for comfortable operation, installation of applications and synchronization, you will need a connection to the World Wide Web. Let's look at the two main ways to do this - through Wi-Fi and cellular networks.
WiFi

To connect to a wireless network, select “Settings” from the list of all programs on the device, and, as a rule, the first switch in this menu will be Wi-Fi. When you click on it, the device will automatically offer to connect to the network if it is open, but if it is password protected, you will need to go to the Wi-Fi menu (by clicking on this word), select the desired network and enter your login and password.
Mobile Internet (LTE, 3G and EDGE)

Usually, the smartphone itself automatically configures the necessary access points after turning it on for the first time with a new SIM card, but if for some reason this does not happen, you can do it manually. To do this, go to settings, click “More” in the “Wireless networks” section, then “Mobile network” and “Access points (APN)”. Here you can create a new access point or change an existing one according to the operator’s settings.

Setting up the Internet manually

1 Go to " Main menu" - select " Settings"

2 Find in settings " Mobile Internet" or " Wireless networks". In this case, " Mobile Internet". Let's go into it

3 Select " Internet access points"or" Access Points (APN). In this case, we have written " Internet access points". Let's go there.

4 Click on " Menu"and choose there" Create APN". "Menu" - "Create APN"

5 Fill in the fields. In the field" Name"Write the name of our connection. In the field" APN"We register the APN according to your operator (see information below). In the field " Login"We write the login according to your operator (see information below). In the field Password similarly, enter the password that your telecom operator provides you (see information below). The remaining fields do not need to be touched.

6 After we have entered the data, we need to save our settings. To do this, click on " Menu" - "Save".

7 Close these settings. Then we turn on the Internet and use it. To do this, let's go back to " Main menu" - "Settings".In the field" Mobile Internet"click on" OFF". If the connection is successful, the slider will enter the " mode ON" as shown in the picture below.

Click on "OFF". The slider will switch to the "ON" status

Information to fill in the fields

Name - any

APN (Access Point)

• for MTS: internet.mts.ru
• for BeeLine: internet.beeline.ru
• for Megafon: internet
• for Tele2: internet.tele2.ru
• for NSS: internet
• for Utel: internet.usi.ru
• for Smarts: internet.smarts.ru

Username

• for MTS: mts
• for BeeLine: beeline
• for Megafon: not entered
• for tele2: not entered
• for NSS: not entered
• for Utel: not entered
• for Smarts: not entered

Password:

• for MTS: mts
• for BeeLine: beeline
• for Megafon: not entered
• for tele2: not entered
• for NSS: not entered
• for Utel: not entered
• for Smarts: not entered

If your operator is not on the list, you can make settings on its official website. If you did everything according to the instructions above, but the Internet does not work, restart your device.

Nowadays, for obvious reasons, a person cannot do without the Internet on his smartphone. After all, it is the presence of a connection to the World Wide Web that turns a phone from an ordinary “dialer” into the most functional device. Download an application, send a message in instant messenger, scroll through your social media feed, check your email, and even buy a movie ticket or book a table in a restaurant - the mobile Internet will allow you to complete any such task, no matter where you are.

But, as practice shows, when installing a SIM card in a new device, the Internet is not always configured automatically. Therefore, in today’s article we will look at how to connect the Internet manually on a smartphone (or tablet) running Android, iOS and Windows Phone/Mobile. In addition, we will provide all the necessary data to fill out all key operators in Russia, Ukraine, Belarus and Kazakhstan.

How to connect the Internet on a smartphone or tablet

• Android
  1. Enter the “Settings” menu.
  2. Select "More".
  3. Then select “Access Points (APN)”.
  4. Press the “+” button to add a new access point.
  5. Enter the data required for your telecom operator.

  Operator settings

  Russia

  • Beeline
    1. APN: internet.beeline.ru
    2. Username: beeline
    3. Password: beeline
  • MTS Russia
    1. APN: internet.mts.ru
    2. Username: mts
    3. Password: mts
  • Tele 2 Russia
    1. APN: internet.tele2.ru
    2. Password: leave blank
  • Yota
    1. APN: internet.yota.ru
    2. Username: leave blank
    3. Password: leave blank

  Ukraine

  • Kyivstar
    1. Username: leave blank
    2. Password: leave blank
    or
    1. APN: internet
    2. Username: leave blank
    3. Password: leave blank
    or (for contract subscribers)
    1. Username: leave blank
    2. Password: leave blank
  • Life:) Ukraine
    1. APN: internet
    2. Username: leave blank
    3. Password: leave blank
  • Vodafone
    1. APN: internet
    2. Username: leave blank
    3. Password: leave blank

  Belarus

  • MTS Belarus
    1. APN: mts
    2. Username: mts
    3. Password: mts
  • Velcom
    1. APN: vmi.velcom.by
    2. Username: leave blank
    3. Password: leave blank
    or (for subscribers of the “PRIVET” and “Communication without obligations” tariff plans)
    1. APN: wap.privet.by
    2. Username: leave blank
    3. Password: leave blank
  • Life:) Belarus
    1. APN: internet.life.com.by
    2. Username: leave blank
    3. Password: leave blank

  Kazakhstan

  • Beeline
    1. APN: internet.beeline.kz
    2. Username: @internet.beeline
    3. Password: beeline
  • Tele 2 Kazakhstan
    1. APN: internet.tele2.kz
    2. Username: leave blank
    3. Password: leave blank
  • Activ
    1. APN: internet
    2. Username: leave blank
    3. Password: leave blank
  • Kcell
    1. APN: internet
    2. Username: leave blank
    3. Password: leave blank

  After entering all the necessary data, you must save the changes by clicking the appropriate button and reboot the device. After this, you may also need to enable data transfer via mobile network. Now the Internet on your smartphone should work properly. Let me know in the comments if this guide helped you.