GOST 9.104 79 paint and varnish coatings. for newly developed products
INTERSTATE STANDARD
Resolution State Committee USSR according to standards of September 28, 1979 No. 3735, the date of introduction has been established
for newly developed products
01.07.80
for those in production
01.07.83
1. This standard applies to paint coatings(hereinafter referred to as coatings) of products and establishes groups of operating conditions for coatings for macroclimatic regions and placement categories in accordance with GOST 15150-69.
2. Operating conditions for coated products are given in the table.
Operating conditions are established depending on the resistance of coatings to the effects of the aggregate climatic factors, the values of which are determined by the normal values on outdoors various macroclimatic regions and categories of placement of painted surfaces.
Climatic design of products according to GOST 15150-69 |
Categories of placement of painted surfaces according to GOST 15150-69 |
Designation of operating conditions for coated products |
|
alphabetic |
digital |
||
3. Parameters of climatic factors characterizing macroclimatic regions according to GOST 15150-69 are established in GOST 9.039-74, 16350-80, GOST 24482-80.
2, 3. (Changed edition, Amendment No. 1).
4. The correspondence of previously adopted designations with designations of operating conditions according to this standard is given in Appendix 3.
APPENDICES 1, 2. (Excluded, Amendment No. 1).
APPENDIX 3
Information
Compliance of previously adopted designations with designations of operating conditions according to this standard
Macroclimatic region according to GOST 15150-69 |
Designation of operating conditions |
||
previously adopted |
according to this standard |
||
Moderate |
|||
Cold |
|||
Tropical dry and tropical wet |
|||
Marine moderately cold |
|||
Marine tropical |
|||
APPLICATION3 . (Changed edition, Rev. No. 1).
UNIFIED SYSTEM FOR PROTECTION AGAINST CORROSION AND AGING
PAINT COATINGS
GROUPS OF OPERATING CONDITIONS GOST 9.104-79
Official publication
USSR STATE COMMITTEE ON STANDARDS
STATE STANDARD OF THE USSR UNION
one system protection against corrosion and aging
PAINT COATINGS
Groups of operating conditions
Instead of GOST 9.009-73
Unified system of corrosion and aging protection.
Coasting of lacquers and paints. _Groups of operation conditions_
By Decree of the USSR State Committee for Standards dated September 28, 1979 No. 3735, the introduction period was established for newly developed products
from 01.07. 1980
for those in production
from 01.07. 1983
1. This standard applies to paint and varnish coatings (hereinafter referred to as coatings) of products and establishes groups of operating conditions for coatings for macroclimatic regions and placement categories in accordance with GOST 15150-69.
2. Operating conditions for coated products are given in the table. Operating conditions are established depending on the durability of coatings
to the influence of a combination of climatic factors, the values of which are determined by the normal values in the open air of various macroclimatic regions and the categories of placement of painted surfaces.
3. The parameters of climatic factors characterizing macroclimatic regions according to GOST 15150-69 are established by GOST 9.039-74, GOST 16350-80, GOST 24482-80.
GOST 9.104-79 Page 2 |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
(Changed edition, Amendment No. 1).
4. The correspondence of the designations of operating conditions according to GOST 9.104-79 to this standard is given in reference Appendix 3.
Appendices 1, 2. (Excluded, Amendment No. 1).
APPENDIX 3
Information
Conformity of designations of operating conditions according to GOST 9.009-73 and this standard
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
(Changed edition, Amendment No. 1) |
Reissue (September 1983) with Change No. 1, approved in March 1983 (IUS b-83).
© Standards Publishing House, 1984
Document's name: | |
Document Number: | 9.104-79 |
Document type: | GOST |
Receiving authority: | State Standard of the USSR |
Published: | official publication |
Acceptance date: | September 28, 1979 |
Start date: | 01 July 1980 |
Expiration date: | July 01, 2019 |
Revision date: | 01 December 2005 |
GOST 9.104-79
Group T95
INTERSTATE STANDARD
Unified system of protection against corrosion and aging
PAINT COATINGS
Groups of operating conditions
Unified system of corrosion and aging protection.
Paint coatings.
Groups of operation conditions
MKS 25.220.60
87.020
Introduction date for newly developed products 1980-07-01
for those in production 1983-07-01
By Decree of the USSR State Committee for Standards dated September 28, 1979 N 3735, the introduction date was set for newly developed products as 07/01/80, for those in production as 07/01/83
INSTEAD GOST 9.009-73
EDITION with Amendment No. 1, approved in March 1983 (IUS 6-83)
1. This standard applies to paint and varnish coatings (hereinafter referred to as coatings) of products and establishes groups of operating conditions for coatings for macroclimatic regions and placement categories in accordance with GOST 15150-69.
2. Operating conditions for coated products are given in the table.
Operating conditions are established depending on the resistance of coatings to a combination of climatic factors, the values of which are determined by the normal outdoor values of various macroclimatic regions and the categories of placement of painted surfaces.
Climatic design of products according to | Designation of product operating conditions |
||
alphabetic | digital |
||
T, TV, TS | |||
3. The parameters of climatic factors characterizing macroclimatic areas according to GOST 15150-69 are established in GOST 9.039-74, GOST 16350-80, GOST 24482-80.
2, 3. (Changed edition, Amendment No. 1).
4. The correspondence of previously adopted designations with designations of operating conditions according to this standard is given in Appendix 3.
APPENDICES 1, 2. (Excluded, Amendment No. 1).
APPENDIX 3 (for reference). Compliance of previously adopted designations with designations of operating conditions according to this standard
APPENDIX 3
Information
Correspondence to previously accepted notations
designations of operating conditions according to this standard
Macroclimatic region according to GOST 15150-69 | Designation of operating conditions |
||
previously adopted | according to this standard |
||
Moderate | |||
Cold | |||
Tropical dry and tropical wet | |||
Marine moderately cold | |||
Marine tropical | |||
APPENDIX 3. (Changed edition, Amendment No. 1).
The text of the document is verified according to:
official publication
Paint and varnish and organic coatings.
Corrosion protection: Sat. Standards. -
M.: Standartinform, 2006
Document's name: | |
Document Number: | 9.104-79 |
Document type: | GOST |
Receiving authority: | State Standard of the USSR |
Published: | official publication Paint and varnish and organic coatings. Corrosion protection: Sat. Standards. - M.: Standartinform, 2006 |
Acceptance date: | September 28, 1979 |
Start date: | 01 July 1980 |
Expiration date: | July 01, 2019 |
Revision date: | 01 December 2005 |
This standard applies to paint and varnish coatings of products and establishes groups of operating conditions for coatings for macroclimatic regions and placement categories in accordance with GOST 15150-69.
Designation: | GOST 9.104-79* |
Russian name: | ESZKS. Paint and varnish coatings. Groups of operating conditions |
Status: | current |
Replaces: | GOST 9.009-73 “ESZKS. Paint and varnish coatings. Groups of operating conditions" |
Date of text update: | 01.10.2008 |
Date added to the database: | 01.02.2009 |
Effective date: | 01.07.1980 |
Approved: | State Standard of the USSR (28.09.1979) |
Published: | Publishing house of standards No. 1991 Standardinform No. 2006 |
State standard of the USSR
By Decree of the USSR State Committee on Standards dated September 28, 1979 No. 3735, the introduction date was established
* Reissue with Change No. 1, approved in March 1983 (IUS 6 -83).
1. This standard applies to paint and varnish coatings (hereinafter referred to as coatings) of products and establishes groups of operating conditions for coatings for macroclimatic regions and placement categories in accordance with GOST 15150-69.
2. Operating conditions for coated products are given in the table.
Operating conditions are established depending on the resistance of the coatings to the effects of a set of climatic factors, the values of which are determined by the normal values in the open air of various macroclimatic regions and the categories of placement of painted surfaces.
Climatic design of products according to GOST 15150-69 | Designation of operating conditions for coated products |
||
alphabetic | digital |
||
1, 1.1 | U1 | ||
2, 2.1 | U2 | ||
3, 3.1 | U3 | ||
4, 4.1, 4.2 | UHL4 | ||
5, 5.1 | AT 5 | ||
HL | 1, 1.1 | HL1 | |
2, 2.1 | HL2 | ||
3, 3.1 | HL3 | ||
4, 4.1, 4.2 | UHL4 | ||
5, 5.1 | AT 5 | ||
UHL | 1, 1.1 | UHL1 | |
2, 2.1 | UHL2 | ||
3, 3.1 | UHL3 | ||
4, 4.1, 4.2 | UHL4 | ||
5, 5.1 | AT 5 | ||
T, TV, TS | 1, 1.1 | T1 | |
2, 2.1 | T2 | ||
3, 3.1 | T3 | ||
4, 4.1, 4.2 | O4 | ||
5, 5.1 | AT 5 | ||
Ohm, M, Tm | 1, 1.1 | OM1 | |
2, 2.1 | OM2 | ||
3, 3.1 | ohm3 | ||
4, 4.1, 4.2 | OM4 | ||
5, 5.1 | |||
1, 1.1 | O1 | ||
2, 2.1 | O2 | ||
3, 3.1 | AT 3 | ||
4, 4.1, 4.2 | O4 | ||
5, 5.1 | AT 5 | ||
1, 1.1 | IN 1 | ||
2, 2.1 | AT 2 | ||
3, 3.1 | AT 3 | ||
4, 4.1, 4.2 | AT 4 | ||
5, 5.1 | AT 5 |
(Changed edition, Amendment No. 1).
3. Parameters of climatic factors characterizing macroclimatic regions according toGOST15150-69, GOST9.039-74, GOST16350-80, GOST24482-80 are installed.
(Changed edition, Amendment No. 1).
4. The correspondence of previously adopted designations with the designations of operating conditions according to this standard is given in Reference Appendix 3.
Appendices 1, 2. (Excluded, Amendment No. 1).
APPENDIX 3
Information
Compliance of previously adopted designations with designations of operating conditions according to this standard
Macroclimatic region according to GOST 15150-69 | Previously accepted accommodation categories | Designation of operating conditions |
|
Previously accepted | According to this standard |
||
Moderate | F 2 | U1 |
|
C 1 | U2 |
||
UHL4 |
|||
Coolant 3 | AT 5 |
||
Cold | F 3 | HL1 |
|
C 3 | HL2 |
||
UHL4 |
|||
Coolant 3 | AT 5 |
||
Tropical dry and tropical wet | Coolant 2 | T1 |
|
F 1 | T2 |
||
C 2 | T3 |
||
Coolant 3 | AT 5 |
||
Marine moderately cold | F 4 | OM1 |
|
F 4 | OM 2 |
||
C1 | OM 3 |
||
ABOUT f 3 | AT 5 |
||
Marine tropical | Coolant 4 | OM1 |
|
Coolant 4 | OM2 |
||
C 2 | OM3 |
||
Coolant 3 | AT 5 |
(Changed edition, Amendment No. 1).