Scheme for assembling weapons on elastic bands. A wooden gun that shoots rubber bands. A gun that shoots rubber bands made of wood - a weapon or an office toy
As a child, did you like to shoot with rubber bands? Well, who didn’t love it? Yes, we had a difficult childhood. Because we didn't have such a wonderful gun that shoots rubber bands.
Do you want to remember your youth, or maybe you want to give a cool gift to your son, brother, nephew or offspring of your friends? Then buy a Wooden Rubber Band Gun.
This miracle of engineering will allow you to accurately and very effectively fire at pets, friends or even colleagues in the office. In this case, shooting will be completely safe, no matter where you end up. The exception is if you hit the boss, although there are options here too.
A gun that shoots rubber bands will appeal to both children and adults. It is positioned as a toy for boys and men, but you know, many ladies will not refuse such a gift either. Think about it and under no circumstances buy this gun for them - you will constantly be under fire. Although... it’s better to buy two pistols and start a real war. Moreover, the cost of ammunition is just a pittance. And the ammunition itself is reusable.
Characteristics
- body material: wood;
- shells: ordinary “rubber bands for money”;
- size: 22.5*10.9*2.1 cm;
- weight: 85 g;
- Age limit: for children over 5 years old.
Select a piece of wood that fits the body of the gun (barrel and butt). The wood should be soft enough that you can cut grooves into the barrel of the gun. Ordinary wood is the cheapest and available material, although bamboo or other materials can also be used for the body of the gun.
- The length of the butt should be about 60 centimeters.
- Suitable wood for the body can be cut from some fairly hard branch, strip or board.
- Wooden tool handles, sold in hardware stores, are also perfect.
Assemble the remaining parts needed for the gun. In addition to the barrel and stock, you will need a trigger mechanism and something to attach it to the body of the gun. So you will need:
- Clothespin (as a trigger)
- Pencil
- Glue (for wood, superglue, etc.)
- Rubber
Attach a clothespin to the body - this will be the trigger mechanism. Best place for the clothespin is determined by the type of gun you want to make. To make the gun more powerful, you should attach the clothespin closer to the rear edge of the body. For a regular shotgun, attach a clothespin ⅔ from the front edge of the barrel. Do it like this:
- Mark the future location of the clothespin with a pencil or knife.
- Glue the clothespin to the body using wood glue, superglue, or hot glue.
- Wait until the glue is completely dry.
- Note: The farther from the front edge of the barrel you place the clothespin, the tighter the elastic will be. If you stick the clothespin too far, it may not be able to hold the elastic and it will slip out of it.
Make a cut on the front of the trunk. Using a knife or other cutting tool(such as a small wood carving saw), cut a groove at the front end of the barrel. This is the groove you will insert the elastic into.
Load your gun. Take the rubber ring and insert one end into the groove you cut in the front of the barrel. After this, pull the free end of the elastic back all the way to the clothespin. Open the clothespin and:
- Pull the elastic a little more until the end is behind the front teeth of the clothespin.
- Snap the clothespin into place by holding the rubber band in it.
Check that the elastic is well stretched and securely fastened. Pull the rubber band back slightly with your fingers to make sure the cutout in the barrel is deep enough to prevent the rubber band from slipping out. Then check the clothespin to make sure it is held securely in place.
- If the rubber easily slides out of the groove in the barrel, deepen it a little.
- If the clothespin moves under the action of a stretched elastic band, secure it more securely with glue or tape.
A gun that shoots rubber bands made of wood - a weapon or an office toy.
As a child, every boy would dream of such weapons. However, at that time it was necessary to launch rubber bands with your fingers or make special crossbows from boards, nails and clothespins. Now you can solve the problem of weapons quite simply - buy a wooden pistol that shoots rubber bands.
Buying a gun that shoots rubber bands will make every little boy’s dream come true.
Undoubtedly, even a child can use this weapon, since contact with a soft rubber band will not harm even indoor plants. The only restriction, almost imposed by the manufacturer itself, applies to office workers, who are strictly prohibited from aiming and shooting at their bosses. Otherwise, instant disarmament and capitulation of the employee is possible.
The operating principle of a wooden rubber band gun is very simple. The rubber band is stretched onto the barrel of the gun at one end, and the other clings to a special drum. The trigger releases the end of the rubber band, grabbed by the drum, and the rubber band flies right to the target. If you are particularly bothered by the opposing side, you can load several rubber bands at once, which will allow you to fire like buckshot. You can buy a pistol for shooting rubber bands for students, schoolchildren and adults with higher education for a pleasant lunchtime.
Features of the wooden rubber band gun:
- Material: natural wood;
- Shoots with rubber bands;
- Suitable for both children and adults;
- Gun dimensions: 20 * 10 * 2 cm;
- Gun weight: 92 g;
- The product is targeted at markets: Europe, Russia.
Have a nice day, Gentlemen! In this article I will tell you and show you how I made such a miracle - weapon made of wood. I still haven’t decided on the name, whether it’s a machine gun or a miniga, but that’s not the point. His main task is shooting with rubber bands, which he copes with with a bang. Given homemade does not pose any danger to people and animals, because it is a rubber arrow. I spent almost a month creating it, sawing, assembling, and gluing this unit in the evenings. I practically didn’t make any drawings, there were only small pencil sketches on A4 sheet. Everything was in my head and was done “by eye” (may the engineers forgive me). I loaded 130 rubber bands on this machine gun, but you can load 3 times more if you load it not in one row, but in 3. Well, okay, it’s time to start showing and telling, because the article will turn out to be quite large.
I will tell you the necessary materials and tools along the way.
Testing and manufacturing of a rubber arrow can be seen in my video:
Step 1: I decided to make a rubber arrow from the butt. All parts will be made from 20 mm thick boards. I repeat, there are no drawings, everything is “by eye”. After everything was cut out necessary details, let's start assembling. I connected the parts with wood glue and self-tapping screws.
This is the butt I came up with, it looks pretty nice :)
Step 2: Next, cut out 2 of these overlays from the board. This will be the handle. Using a chisel we make grooves, as in the photo, they are needed so that the trigger can be pressed and have a “stroke”. We glue them together with wood glue and tighten them with a clamp.
Step 3: From the same board we cut out such a part as in the photo. It will be the “base”, since all the parts will be attached to it. Next we make a small groove for the trigger. I cut the trigger from a piece of laminate. And then we glue the previously made handle and screw in 4 screws for reliability.
Step 4: Then we cut out two of these pieces. And glue them to the base, and also glue the butt.
Step 5: We make this holder for a weapon bipod. Nuts are glued inside, and the bipods themselves will be connected with bolts.
Step 6: To make it convenient to hold our machine gun, we cut out 5 of these U-shaped parts and glue them in place.
Step 7: Next I made 11 sticks like this. Their length is slightly longer than the length of the elastic band. Then I cut out two stars like this from the laminate. I glued all the sticks onto the star with wood glue, and this is how I got the drum. The sticks need to be made as even and “round” as possible so that they fit tightly to the star. Then, having made the markings, I drilled holes for the nails, then glued them in and shortened them to the required length - 8-10 mm.
Step 8: Cold welding I glued one bearing on each side. Then I installed the drum in its place. The drum is mounted on two axes, the axes being two bolts that are tightly inserted into bearings.
Step 9: Then we make a stand like this for the motor. I took the 12 V motor and installed it in its place. To hide the motor, I made this decorative protection.
Step 10: We glue a small bearing into one end of the cylindrical block, and on the other side we glue the cartridge that came with the motor. Then we install the cartridge on the motor shaft, and a bolt is inserted into the bearing.
Step 11: Glue on decorative little things: sight, various small parts, trigger guard, etc.
Step 12: Let's start assembling the electrics. I took a button like this and glued it to its place with thermal glue, so that when pressed with a finger, the trigger would press this button. Several rubber bands return the trigger to its original position. A block glued on top prevents the trigger from rising up. Then we assemble a simple circuit that includes a motor, a button, a box for 18650 batteries and a step-down module. I ordered all the components from a well-known Chinese store. Since the motor is 12V, and four batteries are almost 15V, a step-down module is definitely needed, especially since they can regulate the speed of the motor, and therefore the firing speed of the rubber bands.
